]> Pileus Git - ~andy/linux/blob - drivers/ide/ide.c
icside: use ec->dma directly
[~andy/linux] / drivers / ide / ide.c
1 /*
2  *  linux/drivers/ide/ide.c             Version 7.00beta2       Mar 05 2003
3  *
4  *  Copyright (C) 1994-1998  Linus Torvalds & authors (see below)
5  */
6
7 /*
8  *  Mostly written by Mark Lord  <mlord@pobox.com>
9  *                and Gadi Oxman <gadio@netvision.net.il>
10  *                and Andre Hedrick <andre@linux-ide.org>
11  *
12  *  See linux/MAINTAINERS for address of current maintainer.
13  *
14  * This is the multiple IDE interface driver, as evolved from hd.c.
15  * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
16  *   (usually 14 & 15).
17  * There can be up to two drives per interface, as per the ATA-2 spec.
18  *
19  * ...
20  *
21  *  From hd.c:
22  *  |
23  *  | It traverses the request-list, using interrupts to jump between functions.
24  *  | As nearly all functions can be called within interrupts, we may not sleep.
25  *  | Special care is recommended.  Have Fun!
26  *  |
27  *  | modified by Drew Eckhardt to check nr of hd's from the CMOS.
28  *  |
29  *  | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
30  *  | in the early extended-partition checks and added DM partitions.
31  *  |
32  *  | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
33  *  |
34  *  | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
35  *  | and general streamlining by Mark Lord (mlord@pobox.com).
36  *
37  *  October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
38  *
39  *      Mark Lord       (mlord@pobox.com)               (IDE Perf.Pkg)
40  *      Delman Lee      (delman@ieee.org)               ("Mr. atdisk2")
41  *      Scott Snyder    (snyder@fnald0.fnal.gov)        (ATAPI IDE cd-rom)
42  *
43  *  This was a rewrite of just about everything from hd.c, though some original
44  *  code is still sprinkled about.  Think of it as a major evolution, with
45  *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au
46  */
47
48 #define REVISION        "Revision: 7.00alpha2"
49 #define VERSION         "Id: ide.c 7.00a2 20020906"
50
51 #define _IDE_C                  /* Tell ide.h it's really us */
52
53 #include <linux/module.h>
54 #include <linux/types.h>
55 #include <linux/string.h>
56 #include <linux/kernel.h>
57 #include <linux/timer.h>
58 #include <linux/mm.h>
59 #include <linux/interrupt.h>
60 #include <linux/major.h>
61 #include <linux/errno.h>
62 #include <linux/genhd.h>
63 #include <linux/blkpg.h>
64 #include <linux/slab.h>
65 #include <linux/init.h>
66 #include <linux/pci.h>
67 #include <linux/delay.h>
68 #include <linux/ide.h>
69 #include <linux/completion.h>
70 #include <linux/reboot.h>
71 #include <linux/cdrom.h>
72 #include <linux/seq_file.h>
73 #include <linux/device.h>
74 #include <linux/bitops.h>
75
76 #include <asm/byteorder.h>
77 #include <asm/irq.h>
78 #include <asm/uaccess.h>
79 #include <asm/io.h>
80
81
82 /* default maximum number of failures */
83 #define IDE_DEFAULT_MAX_FAILURES        1
84
85 static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
86                                         IDE2_MAJOR, IDE3_MAJOR,
87                                         IDE4_MAJOR, IDE5_MAJOR,
88                                         IDE6_MAJOR, IDE7_MAJOR,
89                                         IDE8_MAJOR, IDE9_MAJOR };
90
91 static int idebus_parameter;    /* holds the "idebus=" parameter */
92 static int system_bus_speed;    /* holds what we think is VESA/PCI bus speed */
93
94 DEFINE_MUTEX(ide_cfg_mtx);
95  __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
96
97 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
98 static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
99 #endif
100
101 int noautodma = 0;
102
103 #ifdef CONFIG_BLK_DEV_IDEACPI
104 int ide_noacpi = 0;
105 int ide_noacpitfs = 1;
106 int ide_noacpionboot = 1;
107 #endif
108
109 /*
110  * This is declared extern in ide.h, for access by other IDE modules:
111  */
112 ide_hwif_t ide_hwifs[MAX_HWIFS];        /* master data repository */
113
114 EXPORT_SYMBOL(ide_hwifs);
115
116 /*
117  * Do not even *think* about calling this!
118  */
119 static void init_hwif_data(ide_hwif_t *hwif, unsigned int index)
120 {
121         unsigned int unit;
122
123         /* bulk initialize hwif & drive info with zeros */
124         memset(hwif, 0, sizeof(ide_hwif_t));
125
126         /* fill in any non-zero initial values */
127         hwif->index     = index;
128         hwif->major     = ide_hwif_to_major[index];
129
130         hwif->name[0]   = 'i';
131         hwif->name[1]   = 'd';
132         hwif->name[2]   = 'e';
133         hwif->name[3]   = '0' + index;
134
135         hwif->bus_state = BUSSTATE_ON;
136
137         init_completion(&hwif->gendev_rel_comp);
138
139         default_hwif_iops(hwif);
140         default_hwif_transport(hwif);
141         for (unit = 0; unit < MAX_DRIVES; ++unit) {
142                 ide_drive_t *drive = &hwif->drives[unit];
143
144                 drive->media                    = ide_disk;
145                 drive->select.all               = (unit<<4)|0xa0;
146                 drive->hwif                     = hwif;
147                 drive->ctl                      = 0x08;
148                 drive->ready_stat               = READY_STAT;
149                 drive->bad_wstat                = BAD_W_STAT;
150                 drive->special.b.recalibrate    = 1;
151                 drive->special.b.set_geometry   = 1;
152                 drive->name[0]                  = 'h';
153                 drive->name[1]                  = 'd';
154                 drive->name[2]                  = 'a' + (index * MAX_DRIVES) + unit;
155                 drive->max_failures             = IDE_DEFAULT_MAX_FAILURES;
156                 drive->using_dma                = 0;
157                 drive->vdma                     = 0;
158                 INIT_LIST_HEAD(&drive->list);
159                 init_completion(&drive->gendev_rel_comp);
160         }
161 }
162
163 static void init_hwif_default(ide_hwif_t *hwif, unsigned int index)
164 {
165         hw_regs_t hw;
166
167         memset(&hw, 0, sizeof(hw_regs_t));
168
169         ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, &hwif->irq);
170
171         memcpy(&hwif->hw, &hw, sizeof(hw));
172         memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports));
173
174         hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
175 #ifdef CONFIG_BLK_DEV_HD
176         if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA)
177                 hwif->noprobe = 1;      /* may be overridden by ide_setup() */
178 #endif
179 }
180
181 extern void ide_arm_init(void);
182
183 /*
184  * init_ide_data() sets reasonable default values into all fields
185  * of all instances of the hwifs and drives, but only on the first call.
186  * Subsequent calls have no effect (they don't wipe out anything).
187  *
188  * This routine is normally called at driver initialization time,
189  * but may also be called MUCH earlier during kernel "command-line"
190  * parameter processing.  As such, we cannot depend on any other parts
191  * of the kernel (such as memory allocation) to be functioning yet.
192  *
193  * This is too bad, as otherwise we could dynamically allocate the
194  * ide_drive_t structs as needed, rather than always consuming memory
195  * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them.
196  *
197  * FIXME: We should stuff the setup data into __init and copy the
198  * relevant hwifs/allocate them properly during boot.
199  */
200 #define MAGIC_COOKIE 0x12345678
201 static void __init init_ide_data (void)
202 {
203         ide_hwif_t *hwif;
204         unsigned int index;
205         static unsigned long magic_cookie = MAGIC_COOKIE;
206
207         if (magic_cookie != MAGIC_COOKIE)
208                 return;         /* already initialized */
209         magic_cookie = 0;
210
211         /* Initialise all interface structures */
212         for (index = 0; index < MAX_HWIFS; ++index) {
213                 hwif = &ide_hwifs[index];
214                 init_hwif_data(hwif, index);
215                 init_hwif_default(hwif, index);
216 #if !defined(CONFIG_PPC32) || !defined(CONFIG_PCI)
217                 hwif->irq = hwif->hw.irq =
218                         ide_init_default_irq(hwif->io_ports[IDE_DATA_OFFSET]);
219 #endif
220         }
221 #ifdef CONFIG_IDE_ARM
222         ide_arm_init();
223 #endif
224 }
225
226 /**
227  *      ide_system_bus_speed    -       guess bus speed
228  *
229  *      ide_system_bus_speed() returns what we think is the system VESA/PCI
230  *      bus speed (in MHz). This is used for calculating interface PIO timings.
231  *      The default is 40 for known PCI systems, 50 otherwise.
232  *      The "idebus=xx" parameter can be used to override this value.
233  *      The actual value to be used is computed/displayed the first time
234  *      through. Drivers should only use this as a last resort.
235  *
236  *      Returns a guessed speed in MHz.
237  */
238
239 static int ide_system_bus_speed(void)
240 {
241 #ifdef CONFIG_PCI
242         static struct pci_device_id pci_default[] = {
243                 { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) },
244                 { }
245         };
246 #else
247 #define pci_default 0
248 #endif /* CONFIG_PCI */
249
250         if (!system_bus_speed) {
251                 if (idebus_parameter) {
252                         /* user supplied value */
253                         system_bus_speed = idebus_parameter;
254                 } else if (pci_dev_present(pci_default)) {
255                         /* safe default value for PCI */
256                         system_bus_speed = 33;
257                 } else {
258                         /* safe default value for VESA and PCI */
259                         system_bus_speed = 50;
260                 }
261                 printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
262                         "for PIO modes%s\n", system_bus_speed,
263                         idebus_parameter ? "" : "; override with idebus=xx");
264         }
265         return system_bus_speed;
266 }
267
268 ide_hwif_t * ide_find_port(unsigned long base)
269 {
270         ide_hwif_t *hwif;
271         int i;
272
273         for (i = 0; i < MAX_HWIFS; i++) {
274                 hwif = &ide_hwifs[i];
275                 if (hwif->io_ports[IDE_DATA_OFFSET] == base)
276                         goto found;
277         }
278
279         for (i = 0; i < MAX_HWIFS; i++) {
280                 hwif = &ide_hwifs[i];
281                 if (hwif->io_ports[IDE_DATA_OFFSET] == 0)
282                         goto found;
283         }
284
285         hwif = NULL;
286 found:
287         return hwif;
288 }
289
290 EXPORT_SYMBOL_GPL(ide_find_port);
291
292 static struct resource* hwif_request_region(ide_hwif_t *hwif,
293                                             unsigned long addr, int num)
294 {
295         struct resource *res = request_region(addr, num, hwif->name);
296
297         if (!res)
298                 printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
299                                 hwif->name, addr, addr+num-1);
300         return res;
301 }
302
303 /**
304  *      ide_hwif_request_regions - request resources for IDE
305  *      @hwif: interface to use
306  *
307  *      Requests all the needed resources for an interface.
308  *      Right now core IDE code does this work which is deeply wrong.
309  *      MMIO leaves it to the controller driver,
310  *      PIO will migrate this way over time.
311  */
312
313 int ide_hwif_request_regions(ide_hwif_t *hwif)
314 {
315         unsigned long addr;
316         unsigned int i;
317
318         if (hwif->mmio)
319                 return 0;
320         addr = hwif->io_ports[IDE_CONTROL_OFFSET];
321         if (addr && !hwif_request_region(hwif, addr, 1))
322                 goto control_region_busy;
323         hwif->straight8 = 0;
324         addr = hwif->io_ports[IDE_DATA_OFFSET];
325         if ((addr | 7) == hwif->io_ports[IDE_STATUS_OFFSET]) {
326                 if (!hwif_request_region(hwif, addr, 8))
327                         goto data_region_busy;
328                 hwif->straight8 = 1;
329                 return 0;
330         }
331         for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
332                 addr = hwif->io_ports[i];
333                 if (!hwif_request_region(hwif, addr, 1)) {
334                         while (--i)
335                                 release_region(addr, 1);
336                         goto data_region_busy;
337                 }
338         }
339         return 0;
340
341 data_region_busy:
342         addr = hwif->io_ports[IDE_CONTROL_OFFSET];
343         if (addr)
344                 release_region(addr, 1);
345 control_region_busy:
346         /* If any errors are return, we drop the hwif interface. */
347         return -EBUSY;
348 }
349
350 /**
351  *      ide_hwif_release_regions - free IDE resources
352  *
353  *      Note that we only release the standard ports,
354  *      and do not even try to handle any extra ports
355  *      allocated for weird IDE interface chipsets.
356  *
357  *      Note also that we don't yet handle mmio resources here. More
358  *      importantly our caller should be doing this so we need to 
359  *      restructure this as a helper function for drivers.
360  */
361
362 void ide_hwif_release_regions(ide_hwif_t *hwif)
363 {
364         u32 i = 0;
365
366         if (hwif->mmio)
367                 return;
368         if (hwif->io_ports[IDE_CONTROL_OFFSET])
369                 release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
370         if (hwif->straight8) {
371                 release_region(hwif->io_ports[IDE_DATA_OFFSET], 8);
372                 return;
373         }
374         for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
375                 if (hwif->io_ports[i])
376                         release_region(hwif->io_ports[i], 1);
377 }
378
379 /**
380  *      ide_hwif_restore        -       restore hwif to template
381  *      @hwif: hwif to update
382  *      @tmp_hwif: template
383  *
384  *      Restore hwif to a previous state by copying most settings
385  *      from the template.
386  */
387
388 static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
389 {
390         hwif->hwgroup                   = tmp_hwif->hwgroup;
391
392         hwif->gendev.parent             = tmp_hwif->gendev.parent;
393
394         hwif->proc                      = tmp_hwif->proc;
395
396         hwif->major                     = tmp_hwif->major;
397         hwif->straight8                 = tmp_hwif->straight8;
398         hwif->bus_state                 = tmp_hwif->bus_state;
399
400         hwif->host_flags                = tmp_hwif->host_flags;
401
402         hwif->pio_mask                  = tmp_hwif->pio_mask;
403
404         hwif->ultra_mask                = tmp_hwif->ultra_mask;
405         hwif->mwdma_mask                = tmp_hwif->mwdma_mask;
406         hwif->swdma_mask                = tmp_hwif->swdma_mask;
407
408         hwif->cbl                       = tmp_hwif->cbl;
409
410         hwif->chipset                   = tmp_hwif->chipset;
411         hwif->hold                      = tmp_hwif->hold;
412
413 #ifdef CONFIG_BLK_DEV_IDEPCI
414         hwif->pci_dev                   = tmp_hwif->pci_dev;
415         hwif->cds                       = tmp_hwif->cds;
416 #endif
417
418         hwif->fixup                     = tmp_hwif->fixup;
419
420         hwif->set_pio_mode              = tmp_hwif->set_pio_mode;
421         hwif->set_dma_mode              = tmp_hwif->set_dma_mode;
422         hwif->mdma_filter               = tmp_hwif->mdma_filter;
423         hwif->udma_filter               = tmp_hwif->udma_filter;
424         hwif->selectproc                = tmp_hwif->selectproc;
425         hwif->reset_poll                = tmp_hwif->reset_poll;
426         hwif->pre_reset                 = tmp_hwif->pre_reset;
427         hwif->resetproc                 = tmp_hwif->resetproc;
428         hwif->intrproc                  = tmp_hwif->intrproc;
429         hwif->maskproc                  = tmp_hwif->maskproc;
430         hwif->quirkproc                 = tmp_hwif->quirkproc;
431         hwif->busproc                   = tmp_hwif->busproc;
432
433         hwif->ata_input_data            = tmp_hwif->ata_input_data;
434         hwif->ata_output_data           = tmp_hwif->ata_output_data;
435         hwif->atapi_input_bytes         = tmp_hwif->atapi_input_bytes;
436         hwif->atapi_output_bytes        = tmp_hwif->atapi_output_bytes;
437
438         hwif->dma_setup                 = tmp_hwif->dma_setup;
439         hwif->dma_exec_cmd              = tmp_hwif->dma_exec_cmd;
440         hwif->dma_start                 = tmp_hwif->dma_start;
441         hwif->ide_dma_end               = tmp_hwif->ide_dma_end;
442         hwif->ide_dma_on                = tmp_hwif->ide_dma_on;
443         hwif->dma_off_quietly           = tmp_hwif->dma_off_quietly;
444         hwif->ide_dma_test_irq          = tmp_hwif->ide_dma_test_irq;
445         hwif->ide_dma_clear_irq         = tmp_hwif->ide_dma_clear_irq;
446         hwif->dma_host_on               = tmp_hwif->dma_host_on;
447         hwif->dma_host_off              = tmp_hwif->dma_host_off;
448         hwif->dma_lost_irq              = tmp_hwif->dma_lost_irq;
449         hwif->dma_timeout               = tmp_hwif->dma_timeout;
450
451         hwif->OUTB                      = tmp_hwif->OUTB;
452         hwif->OUTBSYNC                  = tmp_hwif->OUTBSYNC;
453         hwif->OUTW                      = tmp_hwif->OUTW;
454         hwif->OUTSW                     = tmp_hwif->OUTSW;
455         hwif->OUTSL                     = tmp_hwif->OUTSL;
456
457         hwif->INB                       = tmp_hwif->INB;
458         hwif->INW                       = tmp_hwif->INW;
459         hwif->INSW                      = tmp_hwif->INSW;
460         hwif->INSL                      = tmp_hwif->INSL;
461
462         hwif->sg_max_nents              = tmp_hwif->sg_max_nents;
463
464         hwif->mmio                      = tmp_hwif->mmio;
465         hwif->rqsize                    = tmp_hwif->rqsize;
466
467 #ifndef CONFIG_BLK_DEV_IDECS
468         hwif->irq                       = tmp_hwif->irq;
469 #endif
470
471         hwif->dma_base                  = tmp_hwif->dma_base;
472         hwif->dma_master                = tmp_hwif->dma_master;
473         hwif->dma_command               = tmp_hwif->dma_command;
474         hwif->dma_vendor1               = tmp_hwif->dma_vendor1;
475         hwif->dma_status                = tmp_hwif->dma_status;
476         hwif->dma_vendor3               = tmp_hwif->dma_vendor3;
477         hwif->dma_prdtable              = tmp_hwif->dma_prdtable;
478
479         hwif->config_data               = tmp_hwif->config_data;
480         hwif->select_data               = tmp_hwif->select_data;
481         hwif->extra_base                = tmp_hwif->extra_base;
482         hwif->extra_ports               = tmp_hwif->extra_ports;
483
484         hwif->hwif_data                 = tmp_hwif->hwif_data;
485 }
486
487 /**
488  *      ide_unregister          -       free an IDE interface
489  *      @index: index of interface (will change soon to a pointer)
490  *
491  *      Perform the final unregister of an IDE interface. At the moment
492  *      we don't refcount interfaces so this will also get split up.
493  *
494  *      Locking:
495  *      The caller must not hold the IDE locks
496  *      The drive present/vanishing is not yet properly locked
497  *      Take care with the callbacks. These have been split to avoid
498  *      deadlocking the IDE layer. The shutdown callback is called
499  *      before we take the lock and free resources. It is up to the
500  *      caller to be sure there is no pending I/O here, and that
501  *      the interface will not be reopened (present/vanishing locking
502  *      isn't yet done BTW). After we commit to the final kill we
503  *      call the cleanup callback with the ide locks held.
504  *
505  *      Unregister restores the hwif structures to the default state.
506  *      This is raving bonkers.
507  */
508
509 void ide_unregister(unsigned int index)
510 {
511         ide_drive_t *drive;
512         ide_hwif_t *hwif, *g;
513         static ide_hwif_t tmp_hwif; /* protected by ide_cfg_mtx */
514         ide_hwgroup_t *hwgroup;
515         int irq_count = 0, unit;
516
517         BUG_ON(index >= MAX_HWIFS);
518
519         BUG_ON(in_interrupt());
520         BUG_ON(irqs_disabled());
521         mutex_lock(&ide_cfg_mtx);
522         spin_lock_irq(&ide_lock);
523         hwif = &ide_hwifs[index];
524         if (!hwif->present)
525                 goto abort;
526         for (unit = 0; unit < MAX_DRIVES; ++unit) {
527                 drive = &hwif->drives[unit];
528                 if (!drive->present)
529                         continue;
530                 spin_unlock_irq(&ide_lock);
531                 device_unregister(&drive->gendev);
532                 wait_for_completion(&drive->gendev_rel_comp);
533                 spin_lock_irq(&ide_lock);
534         }
535         hwif->present = 0;
536
537         spin_unlock_irq(&ide_lock);
538
539         ide_proc_unregister_port(hwif);
540
541         hwgroup = hwif->hwgroup;
542         /*
543          * free the irq if we were the only hwif using it
544          */
545         g = hwgroup->hwif;
546         do {
547                 if (g->irq == hwif->irq)
548                         ++irq_count;
549                 g = g->next;
550         } while (g != hwgroup->hwif);
551         if (irq_count == 1)
552                 free_irq(hwif->irq, hwgroup);
553
554         spin_lock_irq(&ide_lock);
555         /*
556          * Note that we only release the standard ports,
557          * and do not even try to handle any extra ports
558          * allocated for weird IDE interface chipsets.
559          */
560         ide_hwif_release_regions(hwif);
561
562         /*
563          * Remove us from the hwgroup, and free
564          * the hwgroup if we were the only member
565          */
566         if (hwif->next == hwif) {
567                 BUG_ON(hwgroup->hwif != hwif);
568                 kfree(hwgroup);
569         } else {
570                 /* There is another interface in hwgroup.
571                  * Unlink us, and set hwgroup->drive and ->hwif to
572                  * something sane.
573                  */
574                 g = hwgroup->hwif;
575                 while (g->next != hwif)
576                         g = g->next;
577                 g->next = hwif->next;
578                 if (hwgroup->hwif == hwif) {
579                         /* Chose a random hwif for hwgroup->hwif.
580                          * It's guaranteed that there are no drives
581                          * left in the hwgroup.
582                          */
583                         BUG_ON(hwgroup->drive != NULL);
584                         hwgroup->hwif = g;
585                 }
586                 BUG_ON(hwgroup->hwif == hwif);
587         }
588
589         /* More messed up locking ... */
590         spin_unlock_irq(&ide_lock);
591         device_unregister(&hwif->gendev);
592         wait_for_completion(&hwif->gendev_rel_comp);
593
594         /*
595          * Remove us from the kernel's knowledge
596          */
597         blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS);
598         kfree(hwif->sg_table);
599         unregister_blkdev(hwif->major, hwif->name);
600         spin_lock_irq(&ide_lock);
601
602         if (hwif->dma_base) {
603                 (void) ide_release_dma(hwif);
604
605                 hwif->dma_base = 0;
606                 hwif->dma_master = 0;
607                 hwif->dma_command = 0;
608                 hwif->dma_vendor1 = 0;
609                 hwif->dma_status = 0;
610                 hwif->dma_vendor3 = 0;
611                 hwif->dma_prdtable = 0;
612
613                 hwif->extra_base  = 0;
614                 hwif->extra_ports = 0;
615         }
616
617         /* copy original settings */
618         tmp_hwif = *hwif;
619
620         /* restore hwif data to pristine status */
621         init_hwif_data(hwif, index);
622         init_hwif_default(hwif, index);
623
624         ide_hwif_restore(hwif, &tmp_hwif);
625
626 abort:
627         spin_unlock_irq(&ide_lock);
628         mutex_unlock(&ide_cfg_mtx);
629 }
630
631 EXPORT_SYMBOL(ide_unregister);
632
633
634 /**
635  *      ide_setup_ports         -       set up IDE interface ports
636  *      @hw: register descriptions
637  *      @base: base register
638  *      @offsets: table of register offsets
639  *      @ctrl: control register
640  *      @ack_irq: IRQ ack
641  *      @irq: interrupt lie
642  *
643  *      Setup hw_regs_t structure described by parameters.  You
644  *      may set up the hw structure yourself OR use this routine to
645  *      do it for you. This is basically a helper
646  *
647  */
648  
649 void ide_setup_ports (  hw_regs_t *hw,
650                         unsigned long base, int *offsets,
651                         unsigned long ctrl, unsigned long intr,
652                         ide_ack_intr_t *ack_intr,
653 /*
654  *                      ide_io_ops_t *iops,
655  */
656                         int irq)
657 {
658         int i;
659
660         memset(hw, 0, sizeof(hw_regs_t));
661         for (i = 0; i < IDE_NR_PORTS; i++) {
662                 if (offsets[i] == -1) {
663                         switch(i) {
664                                 case IDE_CONTROL_OFFSET:
665                                         hw->io_ports[i] = ctrl;
666                                         break;
667 #if defined(CONFIG_AMIGA) || defined(CONFIG_MAC)
668                                 case IDE_IRQ_OFFSET:
669                                         hw->io_ports[i] = intr;
670                                         break;
671 #endif /* (CONFIG_AMIGA) || (CONFIG_MAC) */
672                                 default:
673                                         hw->io_ports[i] = 0;
674                                         break;
675                         }
676                 } else {
677                         hw->io_ports[i] = base + offsets[i];
678                 }
679         }
680         hw->irq = irq;
681         hw->ack_intr = ack_intr;
682 /*
683  *      hw->iops = iops;
684  */
685 }
686
687 /**
688  *      ide_register_hw         -       register IDE interface
689  *      @hw: hardware registers
690  *      @fixup: fixup function
691  *      @initializing: set while initializing built-in drivers
692  *      @hwifp: pointer to returned hwif
693  *
694  *      Register an IDE interface, specifying exactly the registers etc.
695  *      Set init=1 iff calling before probes have taken place.
696  *
697  *      Returns -1 on error.
698  */
699
700 int ide_register_hw(hw_regs_t *hw, void (*fixup)(ide_hwif_t *),
701                     int initializing, ide_hwif_t **hwifp)
702 {
703         int index, retry = 1;
704         ide_hwif_t *hwif;
705
706         do {
707                 for (index = 0; index < MAX_HWIFS; ++index) {
708                         hwif = &ide_hwifs[index];
709                         if (hwif->io_ports[IDE_DATA_OFFSET] == hw->io_ports[IDE_DATA_OFFSET])
710                                 goto found;
711                 }
712                 for (index = 0; index < MAX_HWIFS; ++index) {
713                         hwif = &ide_hwifs[index];
714                         if (hwif->hold)
715                                 continue;
716                         if ((!hwif->present && !hwif->mate && !initializing) ||
717                             (!hwif->io_ports[IDE_DATA_OFFSET] && initializing))
718                                 goto found;
719                 }
720                 for (index = 0; index < MAX_HWIFS; index++)
721                         ide_unregister(index);
722         } while (retry--);
723         return -1;
724 found:
725         if (hwif->present)
726                 ide_unregister(index);
727         else if (!hwif->hold) {
728                 init_hwif_data(hwif, index);
729                 init_hwif_default(hwif, index);
730         }
731         if (hwif->present)
732                 return -1;
733         memcpy(&hwif->hw, hw, sizeof(*hw));
734         memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports));
735         hwif->irq = hw->irq;
736         hwif->noprobe = 0;
737         hwif->fixup = fixup;
738         hwif->chipset = hw->chipset;
739         hwif->gendev.parent = hw->dev;
740
741         if (initializing == 0) {
742                 u8 idx[4] = { index, 0xff, 0xff, 0xff };
743
744                 ide_device_add(idx);
745         }
746
747         if (hwifp)
748                 *hwifp = hwif;
749
750         return (initializing || hwif->present) ? index : -1;
751 }
752
753 EXPORT_SYMBOL(ide_register_hw);
754
755 /*
756  *      Locks for IDE setting functionality
757  */
758
759 DEFINE_MUTEX(ide_setting_mtx);
760
761 EXPORT_SYMBOL_GPL(ide_setting_mtx);
762
763 /**
764  *      ide_spin_wait_hwgroup   -       wait for group
765  *      @drive: drive in the group
766  *
767  *      Wait for an IDE device group to go non busy and then return
768  *      holding the ide_lock which guards the hwgroup->busy status
769  *      and right to use it.
770  */
771
772 int ide_spin_wait_hwgroup (ide_drive_t *drive)
773 {
774         ide_hwgroup_t *hwgroup = HWGROUP(drive);
775         unsigned long timeout = jiffies + (3 * HZ);
776
777         spin_lock_irq(&ide_lock);
778
779         while (hwgroup->busy) {
780                 unsigned long lflags;
781                 spin_unlock_irq(&ide_lock);
782                 local_irq_set(lflags);
783                 if (time_after(jiffies, timeout)) {
784                         local_irq_restore(lflags);
785                         printk(KERN_ERR "%s: channel busy\n", drive->name);
786                         return -EBUSY;
787                 }
788                 local_irq_restore(lflags);
789                 spin_lock_irq(&ide_lock);
790         }
791         return 0;
792 }
793
794 EXPORT_SYMBOL(ide_spin_wait_hwgroup);
795
796 int set_io_32bit(ide_drive_t *drive, int arg)
797 {
798         if (drive->no_io_32bit)
799                 return -EPERM;
800
801         if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
802                 return -EINVAL;
803
804         drive->io_32bit = arg;
805 #ifdef CONFIG_BLK_DEV_DTC2278
806         if (HWIF(drive)->chipset == ide_dtc2278)
807                 HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg;
808 #endif /* CONFIG_BLK_DEV_DTC2278 */
809         return 0;
810 }
811
812 static int set_ksettings(ide_drive_t *drive, int arg)
813 {
814         if (arg < 0 || arg > 1)
815                 return -EINVAL;
816
817         if (ide_spin_wait_hwgroup(drive))
818                 return -EBUSY;
819         drive->keep_settings = arg;
820         spin_unlock_irq(&ide_lock);
821
822         return 0;
823 }
824
825 int set_using_dma(ide_drive_t *drive, int arg)
826 {
827 #ifdef CONFIG_BLK_DEV_IDEDMA
828         ide_hwif_t *hwif = drive->hwif;
829         int err = -EPERM;
830
831         if (arg < 0 || arg > 1)
832                 return -EINVAL;
833
834         if (!drive->id || !(drive->id->capability & 1))
835                 goto out;
836
837         if (hwif->ide_dma_on == NULL)
838                 goto out;
839
840         err = -EBUSY;
841         if (ide_spin_wait_hwgroup(drive))
842                 goto out;
843         /*
844          * set ->busy flag, unlock and let it ride
845          */
846         hwif->hwgroup->busy = 1;
847         spin_unlock_irq(&ide_lock);
848
849         err = 0;
850
851         if (arg) {
852                 hwif->dma_off_quietly(drive);
853                 if (ide_set_dma(drive) || hwif->ide_dma_on(drive))
854                         err = -EIO;
855         } else
856                 ide_dma_off(drive);
857
858         /*
859          * lock, clear ->busy flag and unlock before leaving
860          */
861         spin_lock_irq(&ide_lock);
862         hwif->hwgroup->busy = 0;
863         spin_unlock_irq(&ide_lock);
864 out:
865         return err;
866 #else
867         if (arg < 0 || arg > 1)
868                 return -EINVAL;
869
870         return -EPERM;
871 #endif
872 }
873
874 int set_pio_mode(ide_drive_t *drive, int arg)
875 {
876         struct request rq;
877
878         if (arg < 0 || arg > 255)
879                 return -EINVAL;
880
881         if (drive->hwif->set_pio_mode == NULL)
882                 return -ENOSYS;
883
884         if (drive->special.b.set_tune)
885                 return -EBUSY;
886         ide_init_drive_cmd(&rq);
887         drive->tune_req = (u8) arg;
888         drive->special.b.set_tune = 1;
889         (void) ide_do_drive_cmd(drive, &rq, ide_wait);
890         return 0;
891 }
892
893 static int set_unmaskirq(ide_drive_t *drive, int arg)
894 {
895         if (drive->no_unmask)
896                 return -EPERM;
897
898         if (arg < 0 || arg > 1)
899                 return -EINVAL;
900
901         if (ide_spin_wait_hwgroup(drive))
902                 return -EBUSY;
903         drive->unmask = arg;
904         spin_unlock_irq(&ide_lock);
905
906         return 0;
907 }
908
909 /**
910  *      system_bus_clock        -       clock guess
911  *
912  *      External version of the bus clock guess used by very old IDE drivers
913  *      for things like VLB timings. Should not be used.
914  */
915
916 int system_bus_clock (void)
917 {
918         return((int) ((!system_bus_speed) ? ide_system_bus_speed() : system_bus_speed ));
919 }
920
921 EXPORT_SYMBOL(system_bus_clock);
922
923 static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
924 {
925         ide_drive_t *drive = dev->driver_data;
926         ide_hwif_t *hwif = HWIF(drive);
927         struct request rq;
928         struct request_pm_state rqpm;
929         ide_task_t args;
930         int ret;
931
932         /* Call ACPI _GTM only once */
933         if (!(drive->dn % 2))
934                 ide_acpi_get_timing(hwif);
935
936         memset(&rq, 0, sizeof(rq));
937         memset(&rqpm, 0, sizeof(rqpm));
938         memset(&args, 0, sizeof(args));
939         rq.cmd_type = REQ_TYPE_PM_SUSPEND;
940         rq.special = &args;
941         rq.data = &rqpm;
942         rqpm.pm_step = ide_pm_state_start_suspend;
943         if (mesg.event == PM_EVENT_PRETHAW)
944                 mesg.event = PM_EVENT_FREEZE;
945         rqpm.pm_state = mesg.event;
946
947         ret = ide_do_drive_cmd(drive, &rq, ide_wait);
948         /* only call ACPI _PS3 after both drivers are suspended */
949         if (!ret && (((drive->dn % 2) && hwif->drives[0].present
950                  && hwif->drives[1].present)
951                  || !hwif->drives[0].present
952                  || !hwif->drives[1].present))
953                 ide_acpi_set_state(hwif, 0);
954         return ret;
955 }
956
957 static int generic_ide_resume(struct device *dev)
958 {
959         ide_drive_t *drive = dev->driver_data;
960         ide_hwif_t *hwif = HWIF(drive);
961         struct request rq;
962         struct request_pm_state rqpm;
963         ide_task_t args;
964         int err;
965
966         /* Call ACPI _STM only once */
967         if (!(drive->dn % 2)) {
968                 ide_acpi_set_state(hwif, 1);
969                 ide_acpi_push_timing(hwif);
970         }
971
972         ide_acpi_exec_tfs(drive);
973
974         memset(&rq, 0, sizeof(rq));
975         memset(&rqpm, 0, sizeof(rqpm));
976         memset(&args, 0, sizeof(args));
977         rq.cmd_type = REQ_TYPE_PM_RESUME;
978         rq.special = &args;
979         rq.data = &rqpm;
980         rqpm.pm_step = ide_pm_state_start_resume;
981         rqpm.pm_state = PM_EVENT_ON;
982
983         err = ide_do_drive_cmd(drive, &rq, ide_head_wait);
984
985         if (err == 0 && dev->driver) {
986                 ide_driver_t *drv = to_ide_driver(dev->driver);
987
988                 if (drv->resume)
989                         drv->resume(drive);
990         }
991
992         return err;
993 }
994
995 int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
996                         unsigned int cmd, unsigned long arg)
997 {
998         unsigned long flags;
999         ide_driver_t *drv;
1000         void __user *p = (void __user *)arg;
1001         int err = 0, (*setfunc)(ide_drive_t *, int);
1002         u8 *val;
1003
1004         switch (cmd) {
1005         case HDIO_GET_32BIT:        val = &drive->io_32bit;      goto read_val;
1006         case HDIO_GET_KEEPSETTINGS: val = &drive->keep_settings; goto read_val;
1007         case HDIO_GET_UNMASKINTR:   val = &drive->unmask;        goto read_val;
1008         case HDIO_GET_DMA:          val = &drive->using_dma;     goto read_val;
1009         case HDIO_SET_32BIT:        setfunc = set_io_32bit;      goto set_val;
1010         case HDIO_SET_KEEPSETTINGS: setfunc = set_ksettings;     goto set_val;
1011         case HDIO_SET_PIO_MODE:     setfunc = set_pio_mode;      goto set_val;
1012         case HDIO_SET_UNMASKINTR:   setfunc = set_unmaskirq;     goto set_val;
1013         case HDIO_SET_DMA:          setfunc = set_using_dma;     goto set_val;
1014         }
1015
1016         switch (cmd) {
1017                 case HDIO_OBSOLETE_IDENTITY:
1018                 case HDIO_GET_IDENTITY:
1019                         if (bdev != bdev->bd_contains)
1020                                 return -EINVAL;
1021                         if (drive->id_read == 0)
1022                                 return -ENOMSG;
1023                         if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142))
1024                                 return -EFAULT;
1025                         return 0;
1026
1027                 case HDIO_GET_NICE:
1028                         return put_user(drive->dsc_overlap      <<      IDE_NICE_DSC_OVERLAP    |
1029                                         drive->atapi_overlap    <<      IDE_NICE_ATAPI_OVERLAP  |
1030                                         drive->nice0            <<      IDE_NICE_0              |
1031                                         drive->nice1            <<      IDE_NICE_1              |
1032                                         drive->nice2            <<      IDE_NICE_2,
1033                                         (long __user *) arg);
1034
1035 #ifdef CONFIG_IDE_TASK_IOCTL
1036                 case HDIO_DRIVE_TASKFILE:
1037                         if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
1038                                 return -EACCES;
1039                         switch(drive->media) {
1040                                 case ide_disk:
1041                                         return ide_taskfile_ioctl(drive, cmd, arg);
1042                                 default:
1043                                         return -ENOMSG;
1044                         }
1045 #endif /* CONFIG_IDE_TASK_IOCTL */
1046
1047                 case HDIO_DRIVE_CMD:
1048                         if (!capable(CAP_SYS_RAWIO))
1049                                 return -EACCES;
1050                         return ide_cmd_ioctl(drive, cmd, arg);
1051
1052                 case HDIO_DRIVE_TASK:
1053                         if (!capable(CAP_SYS_RAWIO))
1054                                 return -EACCES;
1055                         return ide_task_ioctl(drive, cmd, arg);
1056
1057                 case HDIO_SCAN_HWIF:
1058                 {
1059                         hw_regs_t hw;
1060                         int args[3];
1061                         if (!capable(CAP_SYS_RAWIO)) return -EACCES;
1062                         if (copy_from_user(args, p, 3 * sizeof(int)))
1063                                 return -EFAULT;
1064                         memset(&hw, 0, sizeof(hw));
1065                         ide_init_hwif_ports(&hw, (unsigned long) args[0],
1066                                             (unsigned long) args[1], NULL);
1067                         hw.irq = args[2];
1068                         if (ide_register_hw(&hw, NULL, 0, NULL) == -1)
1069                                 return -EIO;
1070                         return 0;
1071                 }
1072                 case HDIO_UNREGISTER_HWIF:
1073                         if (!capable(CAP_SYS_RAWIO)) return -EACCES;
1074                         /* (arg > MAX_HWIFS) checked in function */
1075                         ide_unregister(arg);
1076                         return 0;
1077                 case HDIO_SET_NICE:
1078                         if (!capable(CAP_SYS_ADMIN)) return -EACCES;
1079                         if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
1080                                 return -EPERM;
1081                         drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
1082                         drv = *(ide_driver_t **)bdev->bd_disk->private_data;
1083                         if (drive->dsc_overlap && !drv->supports_dsc_overlap) {
1084                                 drive->dsc_overlap = 0;
1085                                 return -EPERM;
1086                         }
1087                         drive->nice1 = (arg >> IDE_NICE_1) & 1;
1088                         return 0;
1089                 case HDIO_DRIVE_RESET:
1090                 {
1091                         unsigned long flags;
1092                         if (!capable(CAP_SYS_ADMIN)) return -EACCES;
1093                         
1094                         /*
1095                          *      Abort the current command on the
1096                          *      group if there is one, taking
1097                          *      care not to allow anything else
1098                          *      to be queued and to die on the
1099                          *      spot if we miss one somehow
1100                          */
1101
1102                         spin_lock_irqsave(&ide_lock, flags);
1103
1104                         if (HWGROUP(drive)->resetting) {
1105                                 spin_unlock_irqrestore(&ide_lock, flags);
1106                                 return -EBUSY;
1107                         }
1108
1109                         ide_abort(drive, "drive reset");
1110
1111                         BUG_ON(HWGROUP(drive)->handler);
1112                                 
1113                         /* Ensure nothing gets queued after we
1114                            drop the lock. Reset will clear the busy */
1115                    
1116                         HWGROUP(drive)->busy = 1;
1117                         spin_unlock_irqrestore(&ide_lock, flags);
1118                         (void) ide_do_reset(drive);
1119
1120                         return 0;
1121                 }
1122
1123                 case HDIO_GET_BUSSTATE:
1124                         if (!capable(CAP_SYS_ADMIN))
1125                                 return -EACCES;
1126                         if (put_user(HWIF(drive)->bus_state, (long __user *)arg))
1127                                 return -EFAULT;
1128                         return 0;
1129
1130                 case HDIO_SET_BUSSTATE:
1131                         if (!capable(CAP_SYS_ADMIN))
1132                                 return -EACCES;
1133                         if (HWIF(drive)->busproc)
1134                                 return HWIF(drive)->busproc(drive, (int)arg);
1135                         return -EOPNOTSUPP;
1136                 default:
1137                         return -EINVAL;
1138         }
1139
1140 read_val:
1141         mutex_lock(&ide_setting_mtx);
1142         spin_lock_irqsave(&ide_lock, flags);
1143         err = *val;
1144         spin_unlock_irqrestore(&ide_lock, flags);
1145         mutex_unlock(&ide_setting_mtx);
1146         return err >= 0 ? put_user(err, (long __user *)arg) : err;
1147
1148 set_val:
1149         if (bdev != bdev->bd_contains)
1150                 err = -EINVAL;
1151         else {
1152                 if (!capable(CAP_SYS_ADMIN))
1153                         err = -EACCES;
1154                 else {
1155                         mutex_lock(&ide_setting_mtx);
1156                         err = setfunc(drive, arg);
1157                         mutex_unlock(&ide_setting_mtx);
1158                 }
1159         }
1160         return err;
1161 }
1162
1163 EXPORT_SYMBOL(generic_ide_ioctl);
1164
1165 /*
1166  * stridx() returns the offset of c within s,
1167  * or -1 if c is '\0' or not found within s.
1168  */
1169 static int __init stridx (const char *s, char c)
1170 {
1171         char *i = strchr(s, c);
1172         return (i && c) ? i - s : -1;
1173 }
1174
1175 /*
1176  * match_parm() does parsing for ide_setup():
1177  *
1178  * 1. the first char of s must be '='.
1179  * 2. if the remainder matches one of the supplied keywords,
1180  *     the index (1 based) of the keyword is negated and returned.
1181  * 3. if the remainder is a series of no more than max_vals numbers
1182  *     separated by commas, the numbers are saved in vals[] and a
1183  *     count of how many were saved is returned.  Base10 is assumed,
1184  *     and base16 is allowed when prefixed with "0x".
1185  * 4. otherwise, zero is returned.
1186  */
1187 static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals)
1188 {
1189         static const char *decimal = "0123456789";
1190         static const char *hex = "0123456789abcdef";
1191         int i, n;
1192
1193         if (*s++ == '=') {
1194                 /*
1195                  * Try matching against the supplied keywords,
1196                  * and return -(index+1) if we match one
1197                  */
1198                 if (keywords != NULL) {
1199                         for (i = 0; *keywords != NULL; ++i) {
1200                                 if (!strcmp(s, *keywords++))
1201                                         return -(i+1);
1202                         }
1203                 }
1204                 /*
1205                  * Look for a series of no more than "max_vals"
1206                  * numeric values separated by commas, in base10,
1207                  * or base16 when prefixed with "0x".
1208                  * Return a count of how many were found.
1209                  */
1210                 for (n = 0; (i = stridx(decimal, *s)) >= 0;) {
1211                         vals[n] = i;
1212                         while ((i = stridx(decimal, *++s)) >= 0)
1213                                 vals[n] = (vals[n] * 10) + i;
1214                         if (*s == 'x' && !vals[n]) {
1215                                 while ((i = stridx(hex, *++s)) >= 0)
1216                                         vals[n] = (vals[n] * 0x10) + i;
1217                         }
1218                         if (++n == max_vals)
1219                                 break;
1220                         if (*s == ',' || *s == ';')
1221                                 ++s;
1222                 }
1223                 if (!*s)
1224                         return n;
1225         }
1226         return 0;       /* zero = nothing matched */
1227 }
1228
1229 #ifdef CONFIG_BLK_DEV_ALI14XX
1230 extern int probe_ali14xx;
1231 extern int ali14xx_init(void);
1232 #endif
1233 #ifdef CONFIG_BLK_DEV_UMC8672
1234 extern int probe_umc8672;
1235 extern int umc8672_init(void);
1236 #endif
1237 #ifdef CONFIG_BLK_DEV_DTC2278
1238 extern int probe_dtc2278;
1239 extern int dtc2278_init(void);
1240 #endif
1241 #ifdef CONFIG_BLK_DEV_HT6560B
1242 extern int probe_ht6560b;
1243 extern int ht6560b_init(void);
1244 #endif
1245 #ifdef CONFIG_BLK_DEV_QD65XX
1246 extern int probe_qd65xx;
1247 extern int qd65xx_init(void);
1248 #endif
1249
1250 static int __initdata is_chipset_set[MAX_HWIFS];
1251
1252 /*
1253  * ide_setup() gets called VERY EARLY during initialization,
1254  * to handle kernel "command line" strings beginning with "hdx=" or "ide".
1255  *
1256  * Remember to update Documentation/ide.txt if you change something here.
1257  */
1258 static int __init ide_setup(char *s)
1259 {
1260         int i, vals[3];
1261         ide_hwif_t *hwif;
1262         ide_drive_t *drive;
1263         unsigned int hw, unit;
1264         const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1);
1265         const char max_hwif  = '0' + (MAX_HWIFS - 1);
1266
1267         
1268         if (strncmp(s,"hd",2) == 0 && s[2] == '=')      /* hd= is for hd.c   */
1269                 return 0;                               /* driver and not us */
1270
1271         if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2))
1272                 return 0;
1273
1274         printk(KERN_INFO "ide_setup: %s", s);
1275         init_ide_data ();
1276
1277 #ifdef CONFIG_BLK_DEV_IDEDOUBLER
1278         if (!strcmp(s, "ide=doubler")) {
1279                 extern int ide_doubler;
1280
1281                 printk(" : Enabled support for IDE doublers\n");
1282                 ide_doubler = 1;
1283                 return 1;
1284         }
1285 #endif /* CONFIG_BLK_DEV_IDEDOUBLER */
1286
1287         if (!strcmp(s, "ide=nodma")) {
1288                 printk(" : Prevented DMA\n");
1289                 noautodma = 1;
1290                 goto obsolete_option;
1291         }
1292
1293 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1294         if (!strcmp(s, "ide=reverse")) {
1295                 ide_scan_direction = 1;
1296                 printk(" : Enabled support for IDE inverse scan order.\n");
1297                 return 1;
1298         }
1299 #endif
1300
1301 #ifdef CONFIG_BLK_DEV_IDEACPI
1302         if (!strcmp(s, "ide=noacpi")) {
1303                 //printk(" : Disable IDE ACPI support.\n");
1304                 ide_noacpi = 1;
1305                 return 1;
1306         }
1307         if (!strcmp(s, "ide=acpigtf")) {
1308                 //printk(" : Enable IDE ACPI _GTF support.\n");
1309                 ide_noacpitfs = 0;
1310                 return 1;
1311         }
1312         if (!strcmp(s, "ide=acpionboot")) {
1313                 //printk(" : Call IDE ACPI methods on boot.\n");
1314                 ide_noacpionboot = 0;
1315                 return 1;
1316         }
1317 #endif /* CONFIG_BLK_DEV_IDEACPI */
1318
1319         /*
1320          * Look for drive options:  "hdx="
1321          */
1322         if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
1323                 const char *hd_words[] = {
1324                         "none", "noprobe", "nowerr", "cdrom", "nodma",
1325                         "autotune", "noautotune", "minus8", "swapdata", "bswap",
1326                         "noflush", "remap", "remap63", "scsi", NULL };
1327                 unit = s[2] - 'a';
1328                 hw   = unit / MAX_DRIVES;
1329                 unit = unit % MAX_DRIVES;
1330                 hwif = &ide_hwifs[hw];
1331                 drive = &hwif->drives[unit];
1332                 if (strncmp(s + 4, "ide-", 4) == 0) {
1333                         strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
1334                         goto done;
1335                 }
1336                 switch (match_parm(&s[3], hd_words, vals, 3)) {
1337                         case -1: /* "none" */
1338                         case -2: /* "noprobe" */
1339                                 drive->noprobe = 1;
1340                                 goto done;
1341                         case -3: /* "nowerr" */
1342                                 drive->bad_wstat = BAD_R_STAT;
1343                                 hwif->noprobe = 0;
1344                                 goto done;
1345                         case -4: /* "cdrom" */
1346                                 drive->present = 1;
1347                                 drive->media = ide_cdrom;
1348                                 /* an ATAPI device ignores DRDY */
1349                                 drive->ready_stat = 0;
1350                                 hwif->noprobe = 0;
1351                                 goto done;
1352                         case -5: /* nodma */
1353                                 drive->nodma = 1;
1354                                 goto done;
1355                         case -6: /* "autotune" */
1356                                 drive->autotune = IDE_TUNE_AUTO;
1357                                 goto obsolete_option;
1358                         case -7: /* "noautotune" */
1359                                 drive->autotune = IDE_TUNE_NOAUTO;
1360                                 goto obsolete_option;
1361                         case -9: /* "swapdata" */
1362                         case -10: /* "bswap" */
1363                                 drive->bswap = 1;
1364                                 goto done;
1365                         case -11: /* noflush */
1366                                 drive->noflush = 1;
1367                                 goto done;
1368                         case -12: /* "remap" */
1369                                 drive->remap_0_to_1 = 1;
1370                                 goto done;
1371                         case -13: /* "remap63" */
1372                                 drive->sect0 = 63;
1373                                 goto done;
1374                         case -14: /* "scsi" */
1375                                 drive->scsi = 1;
1376                                 goto done;
1377                         case 3: /* cyl,head,sect */
1378                                 drive->media    = ide_disk;
1379                                 drive->ready_stat = READY_STAT;
1380                                 drive->cyl      = drive->bios_cyl  = vals[0];
1381                                 drive->head     = drive->bios_head = vals[1];
1382                                 drive->sect     = drive->bios_sect = vals[2];
1383                                 drive->present  = 1;
1384                                 drive->forced_geom = 1;
1385                                 hwif->noprobe = 0;
1386                                 goto done;
1387                         default:
1388                                 goto bad_option;
1389                 }
1390         }
1391
1392         if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e')
1393                 goto bad_option;
1394         /*
1395          * Look for bus speed option:  "idebus="
1396          */
1397         if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') {
1398                 if (match_parm(&s[6], NULL, vals, 1) != 1)
1399                         goto bad_option;
1400                 if (vals[0] >= 20 && vals[0] <= 66) {
1401                         idebus_parameter = vals[0];
1402                 } else
1403                         printk(" -- BAD BUS SPEED! Expected value from 20 to 66");
1404                 goto done;
1405         }
1406         /*
1407          * Look for interface options:  "idex="
1408          */
1409         if (s[3] >= '0' && s[3] <= max_hwif) {
1410                 /*
1411                  * Be VERY CAREFUL changing this: note hardcoded indexes below
1412                  * (-8, -9, -10) are reserved to ease the hardcoding.
1413                  */
1414                 static const char *ide_words[] = {
1415                         "noprobe", "serialize", "minus3", "minus4",
1416                         "reset", "minus6", "ata66", "minus8", "minus9",
1417                         "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
1418                         "dtc2278", "umc8672", "ali14xx", NULL };
1419                 hw = s[3] - '0';
1420                 hwif = &ide_hwifs[hw];
1421                 i = match_parm(&s[4], ide_words, vals, 3);
1422
1423                 /*
1424                  * Cryptic check to ensure chipset not already set for hwif.
1425                  * Note: we can't depend on hwif->chipset here.
1426                  */
1427                 if ((i >= -18 && i <= -11) || (i > 0 && i <= 3)) {
1428                         /* chipset already specified */
1429                         if (is_chipset_set[hw])
1430                                 goto bad_option;
1431                         if (i > -18 && i <= -11) {
1432                                 /* these drivers are for "ide0=" only */
1433                                 if (hw != 0)
1434                                         goto bad_hwif;
1435                                 /* chipset already specified for 2nd port */
1436                                 if (is_chipset_set[hw+1])
1437                                         goto bad_option;
1438                         }
1439                         is_chipset_set[hw] = 1;
1440                         printk("\n");
1441                 }
1442
1443                 switch (i) {
1444 #ifdef CONFIG_BLK_DEV_ALI14XX
1445                         case -17: /* "ali14xx" */
1446                                 probe_ali14xx = 1;
1447                                 goto done;
1448 #endif
1449 #ifdef CONFIG_BLK_DEV_UMC8672
1450                         case -16: /* "umc8672" */
1451                                 probe_umc8672 = 1;
1452                                 goto done;
1453 #endif
1454 #ifdef CONFIG_BLK_DEV_DTC2278
1455                         case -15: /* "dtc2278" */
1456                                 probe_dtc2278 = 1;
1457                                 goto done;
1458 #endif
1459 #ifdef CONFIG_BLK_DEV_CMD640
1460                         case -14: /* "cmd640_vlb" */
1461                         {
1462                                 extern int cmd640_vlb; /* flag for cmd640.c */
1463                                 cmd640_vlb = 1;
1464                                 goto done;
1465                         }
1466 #endif
1467 #ifdef CONFIG_BLK_DEV_HT6560B
1468                         case -13: /* "ht6560b" */
1469                                 probe_ht6560b = 1;
1470                                 goto done;
1471 #endif
1472 #ifdef CONFIG_BLK_DEV_QD65XX
1473                         case -12: /* "qd65xx" */
1474                                 probe_qd65xx = 1;
1475                                 goto done;
1476 #endif
1477 #ifdef CONFIG_BLK_DEV_4DRIVES
1478                         case -11: /* "four" drives on one set of ports */
1479                         {
1480                                 ide_hwif_t *mate = &ide_hwifs[hw^1];
1481                                 mate->drives[0].select.all ^= 0x20;
1482                                 mate->drives[1].select.all ^= 0x20;
1483                                 hwif->chipset = mate->chipset = ide_4drives;
1484                                 mate->irq = hwif->irq;
1485                                 memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
1486                                 hwif->mate = mate;
1487                                 mate->mate = hwif;
1488                                 hwif->serialized = mate->serialized = 1;
1489                                 goto obsolete_option;
1490                         }
1491 #endif /* CONFIG_BLK_DEV_4DRIVES */
1492                         case -10: /* minus10 */
1493                         case -9: /* minus9 */
1494                         case -8: /* minus8 */
1495                         case -6:
1496                         case -4:
1497                         case -3:
1498                                 goto bad_option;
1499                         case -7: /* ata66 */
1500 #ifdef CONFIG_BLK_DEV_IDEPCI
1501                                 /*
1502                                  * Use ATA_CBL_PATA40_SHORT so drive side
1503                                  * cable detection is also overriden.
1504                                  */
1505                                 hwif->cbl = ATA_CBL_PATA40_SHORT;
1506                                 goto obsolete_option;
1507 #else
1508                                 goto bad_hwif;
1509 #endif
1510                         case -5: /* "reset" */
1511                                 hwif->reset = 1;
1512                                 goto obsolete_option;
1513                         case -2: /* "serialize" */
1514                                 hwif->mate = &ide_hwifs[hw^1];
1515                                 hwif->mate->mate = hwif;
1516                                 hwif->serialized = hwif->mate->serialized = 1;
1517                                 goto obsolete_option;
1518
1519                         case -1: /* "noprobe" */
1520                                 hwif->noprobe = 1;
1521                                 goto done;
1522
1523                         case 1: /* base */
1524                                 vals[1] = vals[0] + 0x206; /* default ctl */
1525                         case 2: /* base,ctl */
1526                                 vals[2] = 0;    /* default irq = probe for it */
1527                         case 3: /* base,ctl,irq */
1528                                 hwif->hw.irq = vals[2];
1529                                 ide_init_hwif_ports(&hwif->hw, (unsigned long) vals[0], (unsigned long) vals[1], &hwif->irq);
1530                                 memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
1531                                 hwif->irq      = vals[2];
1532                                 hwif->noprobe  = 0;
1533                                 hwif->chipset  = ide_forced;
1534                                 goto obsolete_option;
1535
1536                         case 0: goto bad_option;
1537                         default:
1538                                 printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n");
1539                                 return 1;
1540                 }
1541         }
1542 bad_option:
1543         printk(" -- BAD OPTION\n");
1544         return 1;
1545 obsolete_option:
1546         printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n");
1547         return 1;
1548 bad_hwif:
1549         printk("-- NOT SUPPORTED ON ide%d", hw);
1550 done:
1551         printk("\n");
1552         return 1;
1553 }
1554
1555 extern void __init pnpide_init(void);
1556 extern void __exit pnpide_exit(void);
1557 extern void __init h8300_ide_init(void);
1558
1559 /*
1560  * probe_for_hwifs() finds/initializes "known" IDE interfaces
1561  */
1562 static void __init probe_for_hwifs (void)
1563 {
1564 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1565         ide_scan_pcibus(ide_scan_direction);
1566 #endif
1567
1568 #ifdef CONFIG_ETRAX_IDE
1569         {
1570                 extern void init_e100_ide(void);
1571                 init_e100_ide();
1572         }
1573 #endif /* CONFIG_ETRAX_IDE */
1574 #ifdef CONFIG_BLK_DEV_CMD640
1575         {
1576                 extern void ide_probe_for_cmd640x(void);
1577                 ide_probe_for_cmd640x();
1578         }
1579 #endif /* CONFIG_BLK_DEV_CMD640 */
1580 #ifdef CONFIG_BLK_DEV_IDE_PMAC
1581         {
1582                 extern int pmac_ide_probe(void);
1583                 (void)pmac_ide_probe();
1584         }
1585 #endif /* CONFIG_BLK_DEV_IDE_PMAC */
1586 #ifdef CONFIG_BLK_DEV_GAYLE
1587         {
1588                 extern void gayle_init(void);
1589                 gayle_init();
1590         }
1591 #endif /* CONFIG_BLK_DEV_GAYLE */
1592 #ifdef CONFIG_BLK_DEV_FALCON_IDE
1593         {
1594                 extern void falconide_init(void);
1595                 falconide_init();
1596         }
1597 #endif /* CONFIG_BLK_DEV_FALCON_IDE */
1598 #ifdef CONFIG_BLK_DEV_MAC_IDE
1599         {
1600                 extern void macide_init(void);
1601                 macide_init();
1602         }
1603 #endif /* CONFIG_BLK_DEV_MAC_IDE */
1604 #ifdef CONFIG_BLK_DEV_Q40IDE
1605         {
1606                 extern void q40ide_init(void);
1607                 q40ide_init();
1608         }
1609 #endif /* CONFIG_BLK_DEV_Q40IDE */
1610 #ifdef CONFIG_BLK_DEV_BUDDHA
1611         {
1612                 extern void buddha_init(void);
1613                 buddha_init();
1614         }
1615 #endif /* CONFIG_BLK_DEV_BUDDHA */
1616 #ifdef CONFIG_BLK_DEV_IDEPNP
1617         pnpide_init();
1618 #endif
1619 #ifdef CONFIG_H8300
1620         h8300_ide_init();
1621 #endif
1622 }
1623
1624 /*
1625  * Probe module
1626  */
1627
1628 EXPORT_SYMBOL(ide_lock);
1629
1630 static int ide_bus_match(struct device *dev, struct device_driver *drv)
1631 {
1632         return 1;
1633 }
1634
1635 static char *media_string(ide_drive_t *drive)
1636 {
1637         switch (drive->media) {
1638         case ide_disk:
1639                 return "disk";
1640         case ide_cdrom:
1641                 return "cdrom";
1642         case ide_tape:
1643                 return "tape";
1644         case ide_floppy:
1645                 return "floppy";
1646         case ide_optical:
1647                 return "optical";
1648         default:
1649                 return "UNKNOWN";
1650         }
1651 }
1652
1653 static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf)
1654 {
1655         ide_drive_t *drive = to_ide_device(dev);
1656         return sprintf(buf, "%s\n", media_string(drive));
1657 }
1658
1659 static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf)
1660 {
1661         ide_drive_t *drive = to_ide_device(dev);
1662         return sprintf(buf, "%s\n", drive->name);
1663 }
1664
1665 static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
1666 {
1667         ide_drive_t *drive = to_ide_device(dev);
1668         return sprintf(buf, "ide:m-%s\n", media_string(drive));
1669 }
1670
1671 static struct device_attribute ide_dev_attrs[] = {
1672         __ATTR_RO(media),
1673         __ATTR_RO(drivename),
1674         __ATTR_RO(modalias),
1675         __ATTR_NULL
1676 };
1677
1678 static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
1679 {
1680         ide_drive_t *drive = to_ide_device(dev);
1681
1682         add_uevent_var(env, "MEDIA=%s", media_string(drive));
1683         add_uevent_var(env, "DRIVENAME=%s", drive->name);
1684         add_uevent_var(env, "MODALIAS=ide:m-%s", media_string(drive));
1685         return 0;
1686 }
1687
1688 static int generic_ide_probe(struct device *dev)
1689 {
1690         ide_drive_t *drive = to_ide_device(dev);
1691         ide_driver_t *drv = to_ide_driver(dev->driver);
1692
1693         return drv->probe ? drv->probe(drive) : -ENODEV;
1694 }
1695
1696 static int generic_ide_remove(struct device *dev)
1697 {
1698         ide_drive_t *drive = to_ide_device(dev);
1699         ide_driver_t *drv = to_ide_driver(dev->driver);
1700
1701         if (drv->remove)
1702                 drv->remove(drive);
1703
1704         return 0;
1705 }
1706
1707 static void generic_ide_shutdown(struct device *dev)
1708 {
1709         ide_drive_t *drive = to_ide_device(dev);
1710         ide_driver_t *drv = to_ide_driver(dev->driver);
1711
1712         if (dev->driver && drv->shutdown)
1713                 drv->shutdown(drive);
1714 }
1715
1716 struct bus_type ide_bus_type = {
1717         .name           = "ide",
1718         .match          = ide_bus_match,
1719         .uevent         = ide_uevent,
1720         .probe          = generic_ide_probe,
1721         .remove         = generic_ide_remove,
1722         .shutdown       = generic_ide_shutdown,
1723         .dev_attrs      = ide_dev_attrs,
1724         .suspend        = generic_ide_suspend,
1725         .resume         = generic_ide_resume,
1726 };
1727
1728 EXPORT_SYMBOL_GPL(ide_bus_type);
1729
1730 /*
1731  * This is gets invoked once during initialization, to set *everything* up
1732  */
1733 static int __init ide_init(void)
1734 {
1735         int ret;
1736
1737         printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n");
1738         system_bus_speed = ide_system_bus_speed();
1739
1740         ret = bus_register(&ide_bus_type);
1741         if (ret < 0) {
1742                 printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
1743                 return ret;
1744         }
1745
1746         init_ide_data();
1747
1748         proc_ide_create();
1749
1750 #ifdef CONFIG_BLK_DEV_ALI14XX
1751         if (probe_ali14xx)
1752                 (void)ali14xx_init();
1753 #endif
1754 #ifdef CONFIG_BLK_DEV_UMC8672
1755         if (probe_umc8672)
1756                 (void)umc8672_init();
1757 #endif
1758 #ifdef CONFIG_BLK_DEV_DTC2278
1759         if (probe_dtc2278)
1760                 (void)dtc2278_init();
1761 #endif
1762 #ifdef CONFIG_BLK_DEV_HT6560B
1763         if (probe_ht6560b)
1764                 (void)ht6560b_init();
1765 #endif
1766 #ifdef CONFIG_BLK_DEV_QD65XX
1767         if (probe_qd65xx)
1768                 (void)qd65xx_init();
1769 #endif
1770
1771         /* Probe for special PCI and other "known" interface chipsets. */
1772         probe_for_hwifs();
1773
1774         return 0;
1775 }
1776
1777 #ifdef MODULE
1778 static char *options = NULL;
1779 module_param(options, charp, 0);
1780 MODULE_LICENSE("GPL");
1781
1782 static void __init parse_options (char *line)
1783 {
1784         char *next = line;
1785
1786         if (line == NULL || !*line)
1787                 return;
1788         while ((line = next) != NULL) {
1789                 if ((next = strchr(line,' ')) != NULL)
1790                         *next++ = 0;
1791                 if (!ide_setup(line))
1792                         printk (KERN_INFO "Unknown option '%s'\n", line);
1793         }
1794 }
1795
1796 int __init init_module (void)
1797 {
1798         parse_options(options);
1799         return ide_init();
1800 }
1801
1802 void __exit cleanup_module (void)
1803 {
1804         int index;
1805
1806         for (index = 0; index < MAX_HWIFS; ++index)
1807                 ide_unregister(index);
1808
1809 #ifdef CONFIG_BLK_DEV_IDEPNP
1810         pnpide_exit();
1811 #endif
1812
1813         proc_ide_destroy();
1814
1815         bus_unregister(&ide_bus_type);
1816 }
1817
1818 #else /* !MODULE */
1819
1820 __setup("", ide_setup);
1821
1822 module_init(ide_init);
1823
1824 #endif /* MODULE */