2 # Hardware monitoring chip drivers configuration
6 tristate "Hardware Monitoring support"
10 Hardware monitoring devices let you monitor the hardware health
11 of a system. Most modern motherboards include such a device. It
12 can include temperature sensors, voltage sensors, fan speed
13 sensors and various additional features such as the ability to
14 control the speed of the fans. If you want this support you
15 should say Y here and also to the specific driver(s) for your
16 sensors chip(s) below.
18 To find out which specific driver(s) you need, use the
19 sensors-detect script from the lm_sensors package. Read
20 <file:Documentation/hwmon/userspace-tools> for details.
22 This support can also be built as a module. If so, the module
31 config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
35 Say Y here if you want the I2C chip drivers to produce a bunch of
36 debug messages to the system log. Select this if you are having
37 a problem with I2C support and want to see more of what is going
40 comment "Native drivers"
42 config SENSORS_ABITUGURU
43 tristate "Abit uGuru (rev 1 & 2)"
46 If you say yes here you get support for the sensor part of the first
47 and second revision of the Abit uGuru chip. The voltage and frequency
48 control parts of the Abit uGuru are not supported. The Abit uGuru
49 chip can be found on Abit uGuru featuring motherboards (most modern
50 Abit motherboards from before end 2005). For more info and a list
51 of which motherboards have which revision see
52 Documentation/hwmon/abituguru
54 This driver can also be built as a module. If so, the module
55 will be called abituguru.
57 config SENSORS_ABITUGURU3
58 tristate "Abit uGuru (rev 3)"
61 If you say yes here you get support for the sensor part of the
62 third revision of the Abit uGuru chip. Only reading the sensors
63 and their settings is supported. The third revision of the Abit
64 uGuru chip can be found on recent Abit motherboards (since end
65 2005). For more info and a list of which motherboards have which
66 revision see Documentation/hwmon/abituguru3
68 This driver can also be built as a module. If so, the module
69 will be called abituguru3.
72 tristate "Analog Devices AD7314 and compatibles"
75 If you say yes here you get support for the Analog Devices
76 AD7314, ADT7301 and ADT7302 temperature sensors.
78 This driver can also be built as a module. If so, the module
79 will be called ad7314.
82 tristate "Analog Devices AD7414"
85 If you say yes here you get support for the Analog Devices
86 AD7414 temperature monitoring chip.
88 This driver can also be built as a module. If so, the module
89 will be called ad7414.
92 tristate "Analog Devices AD7416, AD7417 and AD7418"
95 If you say yes here you get support for the Analog Devices
96 AD7416, AD7417 and AD7418 temperature monitoring chips.
98 This driver can also be built as a module. If so, the module
99 will be called ad7418.
102 tristate "National Semiconductor ADCxxxSxxx"
103 depends on SPI_MASTER
105 If you say yes here you get support for the National Semiconductor
106 ADC<bb><c>S<sss> chip family, where
107 * bb is the resolution in number of bits (8, 10, 12)
108 * c is the number of channels (1, 2, 4, 8)
109 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
110 kSPS and 101 for 1 MSPS)
112 Examples : ADC081S101, ADC124S501, ...
114 This driver can also be built as a module. If so, the module
115 will be called adcxx.
117 config SENSORS_ADM1021
118 tristate "Analog Devices ADM1021 and compatibles"
121 If you say yes here you get support for Analog Devices ADM1021
122 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
123 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
125 This driver can also be built as a module. If so, the module
126 will be called adm1021.
128 config SENSORS_ADM1025
129 tristate "Analog Devices ADM1025 and compatibles"
133 If you say yes here you get support for Analog Devices ADM1025
134 and Philips NE1619 sensor chips.
136 This driver can also be built as a module. If so, the module
137 will be called adm1025.
139 config SENSORS_ADM1026
140 tristate "Analog Devices ADM1026 and compatibles"
144 If you say yes here you get support for Analog Devices ADM1026
147 This driver can also be built as a module. If so, the module
148 will be called adm1026.
150 config SENSORS_ADM1029
151 tristate "Analog Devices ADM1029"
154 If you say yes here you get support for Analog Devices ADM1029
156 Very rare chip, please let us know you use it.
158 This driver can also be built as a module. If so, the module
159 will be called adm1029.
161 config SENSORS_ADM1031
162 tristate "Analog Devices ADM1031 and compatibles"
165 If you say yes here you get support for Analog Devices ADM1031
166 and ADM1030 sensor chips.
168 This driver can also be built as a module. If so, the module
169 will be called adm1031.
171 config SENSORS_ADM9240
172 tristate "Analog Devices ADM9240 and compatibles"
176 If you say yes here you get support for Analog Devices ADM9240,
177 Dallas DS1780, National Semiconductor LM81 sensor chips.
179 This driver can also be built as a module. If so, the module
180 will be called adm9240.
182 config SENSORS_ADT7410
183 tristate "Analog Devices ADT7410"
186 If you say yes here you get support for the Analog Devices
187 ADT7410 temperature monitoring chip.
189 This driver can also be built as a module. If so, the module
190 will be called adt7410.
192 config SENSORS_ADT7411
193 tristate "Analog Devices ADT7411"
196 If you say yes here you get support for the Analog Devices
197 ADT7411 voltage and temperature monitoring chip.
199 This driver can also be built as a module. If so, the module
200 will be called adt7411.
202 config SENSORS_ADT7462
203 tristate "Analog Devices ADT7462"
206 If you say yes here you get support for the Analog Devices
207 ADT7462 temperature monitoring chips.
209 This driver can also be built as a module. If so, the module
210 will be called adt7462.
212 config SENSORS_ADT7470
213 tristate "Analog Devices ADT7470"
216 If you say yes here you get support for the Analog Devices
217 ADT7470 temperature monitoring chips.
219 This driver can also be built as a module. If so, the module
220 will be called adt7470.
222 config SENSORS_ADT7475
223 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
227 If you say yes here you get support for the Analog Devices
228 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
231 This driver can also be build as a module. If so, the module
232 will be called adt7475.
234 config SENSORS_ASC7621
235 tristate "Andigilog aSC7621"
238 If you say yes here you get support for the aSC7621
239 family of SMBus sensors chip found on most Intel X38, X48, X58,
240 945, 965 and 975 desktop boards. Currently supported chips:
244 This driver can also be built as a module. If so, the module
245 will be called asc7621.
247 config SENSORS_K8TEMP
248 tristate "AMD Athlon64/FX or Opteron temperature sensor"
249 depends on X86 && PCI
251 If you say yes here you get support for the temperature
252 sensor(s) inside your CPU. Supported is whole AMD K8
253 microarchitecture. Please note that you will need at least
254 lm-sensors 2.10.1 for proper userspace support.
256 This driver can also be built as a module. If so, the module
257 will be called k8temp.
259 config SENSORS_K10TEMP
260 tristate "AMD Family 10h+ temperature sensor"
261 depends on X86 && PCI
263 If you say yes here you get support for the temperature
264 sensor(s) inside your CPU. Supported are later revisions of
265 the AMD Family 10h and all revisions of the AMD Family 11h,
266 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
269 This driver can also be built as a module. If so, the module
270 will be called k10temp.
272 config SENSORS_FAM15H_POWER
273 tristate "AMD Family 15h processor power"
274 depends on X86 && PCI
276 If you say yes here you get support for processor power
277 information of your AMD family 15h CPU.
279 This driver can also be built as a module. If so, the module
280 will be called fam15h_power.
282 config SENSORS_ASB100
283 tristate "Asus ASB100 Bach"
284 depends on X86 && I2C
287 If you say yes here you get support for the ASB100 Bach sensor
288 chip found on some Asus mainboards.
290 This driver can also be built as a module. If so, the module
291 will be called asb100.
294 tristate "Attansic ATXP1 VID controller"
298 If you say yes here you get support for the Attansic ATXP1 VID
301 If your board have such a chip, you are able to control your CPU
302 core and other voltages.
304 This driver can also be built as a module. If so, the module
305 will be called atxp1.
308 tristate "Dallas Semiconductor DS620"
311 If you say yes here you get support for Dallas Semiconductor
314 This driver can also be built as a module. If so, the module
315 will be called ds620.
317 config SENSORS_DS1621
318 tristate "Dallas Semiconductor DS1621 and DS1625"
321 If you say yes here you get support for Dallas Semiconductor
322 DS1621 and DS1625 sensor chips.
324 This driver can also be built as a module. If so, the module
325 will be called ds1621.
327 config SENSORS_DA9052_ADC
328 tristate "Dialog DA9052/DA9053 ADC"
329 depends on PMIC_DA9052
331 Say y here to support the ADC found on Dialog Semiconductor
332 DA9052-BC and DA9053-AA/Bx PMICs.
334 This driver can also be built as module. If so, the module
335 will be called da9052-hwmon.
337 config SENSORS_EXYNOS4_TMU
338 tristate "Temperature sensor on Samsung EXYNOS4"
339 depends on ARCH_EXYNOS4
341 If you say yes here you get support for TMU (Thermal Management
342 Unit) on SAMSUNG EXYNOS4 series of SoC.
344 This driver can also be built as a module. If so, the module
345 will be called exynos4-tmu.
347 config SENSORS_I5K_AMB
348 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
351 If you say yes here you get support for FB-DIMM AMB temperature
352 monitoring chips on systems with the Intel 5000 series chipset.
354 This driver can also be built as a module. If so, the module
355 will be called i5k_amb.
357 config SENSORS_F71805F
358 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
361 If you say yes here you get support for hardware monitoring
362 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
365 This driver can also be built as a module. If so, the module
366 will be called f71805f.
368 config SENSORS_F71882FG
369 tristate "Fintek F71882FG and compatibles"
372 If you say yes here you get support for hardware monitoring
373 features of many Fintek Super-I/O (LPC) chips. The currently
387 This driver can also be built as a module. If so, the module
388 will be called f71882fg.
390 config SENSORS_F75375S
391 tristate "Fintek F75375S/SP, F75373 and F75387"
394 If you say yes here you get support for hardware monitoring
395 features of the Fintek F75375S/SP, F75373 and F75387
397 This driver can also be built as a module. If so, the module
398 will be called f75375s.
400 config SENSORS_FSCHMD
401 tristate "Fujitsu Siemens Computers sensor chips"
402 depends on X86 && I2C
404 If you say yes here you get support for the following Fujitsu
405 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
406 Heimdall, Heracles, Hades and Syleus including support for the
409 This is a merged driver for FSC sensor chips replacing the fscpos,
410 fscscy and fscher drivers and adding support for several other FSC
413 This driver can also be built as a module. If so, the module
414 will be called fschmd.
420 If you say yes here you get support for Global Mixed-mode
421 Technology Inc G760A fan speed PWM controller chips.
423 This driver can also be built as a module. If so, the module
424 will be called g760a.
426 config SENSORS_GL518SM
427 tristate "Genesys Logic GL518SM"
430 If you say yes here you get support for Genesys Logic GL518SM
433 This driver can also be built as a module. If so, the module
434 will be called gl518sm.
436 config SENSORS_GL520SM
437 tristate "Genesys Logic GL520SM"
441 If you say yes here you get support for Genesys Logic GL520SM
444 This driver can also be built as a module. If so, the module
445 will be called gl520sm.
447 config SENSORS_GPIO_FAN
451 If you say yes here you get support for fans connected to GPIO lines.
453 This driver can also be built as a module. If so, the module
454 will be called gpio-fan.
456 config SENSORS_HIH6130
457 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
460 If you say yes here you get support for Honeywell Humidicon
461 HIH-6130 and HIH-6131 Humidicon humidity sensors.
463 This driver can also be built as a module. If so, the module
464 will be called hih6130.
466 config SENSORS_CORETEMP
467 tristate "Intel Core/Core2/Atom temperature sensor"
468 depends on X86 && PCI
470 If you say yes here you get support for the temperature
471 sensor inside your CPU. Most of the family 6 CPUs
472 are supported. Check Documentation/hwmon/coretemp for details.
474 config SENSORS_IBMAEM
475 tristate "IBM Active Energy Manager temperature/power sensors and control"
477 depends on IPMI_HANDLER
479 If you say yes here you get support for the temperature and
480 power sensors and capping hardware in various IBM System X
481 servers that support Active Energy Manager. This includes
482 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
483 and certain HC10/HS2x/LS2x/QS2x blades.
485 This driver can also be built as a module. If so, the module
486 will be called ibmaem.
488 config SENSORS_IBMPEX
489 tristate "IBM PowerExecutive temperature/power sensors"
491 depends on IPMI_HANDLER
493 If you say yes here you get support for the temperature and
494 power sensors in various IBM System X servers that support
495 PowerExecutive. So far this includes the x3350, x3550, x3650,
496 x3655, and x3755; the x3800, x3850, and x3950 models that have
497 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
499 This driver can also be built as a module. If so, the module
500 will be called ibmpex.
503 tristate "ITE IT87xx and compatibles"
507 If you say yes here you get support for ITE IT8705F, IT8712F,
508 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
509 IT8782F, and IT8783E/F sensor chips, and the SiS950 clone.
511 This driver can also be built as a module. If so, the module
514 config SENSORS_JZ4740
515 tristate "Ingenic JZ4740 SoC ADC driver"
516 depends on MACH_JZ4740 && MFD_JZ4740_ADC
518 If you say yes here you get support for reading adc values from the ADCIN
519 pin on Ingenic JZ4740 SoC based boards.
521 This driver can also be build as a module. If so, the module will be
525 tristate "JEDEC JC42.4 compliant memory module temperature sensors"
528 If you say yes here, you get support for JEDEC JC42.4 compliant
529 temperature sensors, which are used on many DDR3 memory modules for
530 mobile devices and servers. Support will include, but not be limited
531 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
532 MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002,
533 STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
535 This driver can also be built as a module. If so, the module
538 config SENSORS_LINEAGE
539 tristate "Lineage Compact Power Line Power Entry Module"
542 If you say yes here you get support for the Lineage Compact Power Line
543 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
544 CP2000DC, CP2725, and others.
546 This driver can also be built as a module. If so, the module
547 will be called lineage-pem.
550 tristate "National Semiconductor LM63 and compatibles"
553 If you say yes here you get support for the National
554 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
555 sensors with integrated fan control. Such chips are found
556 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
559 This driver can also be built as a module. If so, the module
563 tristate "National Semiconductor LM70 and compatibles"
564 depends on SPI_MASTER
566 If you say yes here you get support for the National Semiconductor
567 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
570 This driver can also be built as a module. If so, the module
574 tristate "National Semiconductor LM73"
577 If you say yes here you get support for National Semiconductor LM73
579 This driver can also be built as a module. If so, the module
583 tristate "National Semiconductor LM75 and compatibles"
586 If you say yes here you get support for one common type of
587 temperature sensor chip, with models including:
589 - Analog Devices ADT75
590 - Dallas Semiconductor DS75 and DS1775
591 - Maxim MAX6625 and MAX6626
593 - National Semiconductor LM75, LM75A
595 - ST Microelectronics STDS75
596 - TelCom (now Microchip) TCN75
597 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
600 This driver supports driver model based binding through board
601 specific I2C device tables.
603 It also supports the "legacy" style of driver binding. To use
604 that with some chips which don't replicate LM75 quirks exactly,
605 you may need the "force" module parameter.
607 This driver can also be built as a module. If so, the module
611 tristate "National Semiconductor LM77"
614 If you say yes here you get support for National Semiconductor LM77
617 This driver can also be built as a module. If so, the module
621 tristate "National Semiconductor LM78 and compatibles"
625 If you say yes here you get support for National Semiconductor LM78,
628 This driver can also be built as a module. If so, the module
632 tristate "National Semiconductor LM80 and LM96080"
635 If you say yes here you get support for National Semiconductor
636 LM80 and LM96080 sensor chips.
638 This driver can also be built as a module. If so, the module
642 tristate "National Semiconductor LM83 and compatibles"
645 If you say yes here you get support for National Semiconductor
646 LM82 and LM83 sensor chips.
648 This driver can also be built as a module. If so, the module
652 tristate "National Semiconductor LM85 and compatibles"
656 If you say yes here you get support for National Semiconductor LM85
657 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
658 EMC6D101, EMC6D102, and EMC6D103.
660 This driver can also be built as a module. If so, the module
664 tristate "National Semiconductor LM87 and compatibles"
668 If you say yes here you get support for National Semiconductor LM87
669 and Analog Devices ADM1024 sensor chips.
671 This driver can also be built as a module. If so, the module
675 tristate "National Semiconductor LM90 and compatibles"
678 If you say yes here you get support for National Semiconductor LM90,
679 LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
680 Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
681 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
682 Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
685 This driver can also be built as a module. If so, the module
689 tristate "National Semiconductor LM92 and compatibles"
692 If you say yes here you get support for National Semiconductor LM92
693 and Maxim MAX6635 sensor chips.
695 This driver can also be built as a module. If so, the module
699 tristate "National Semiconductor LM93 and compatibles"
703 If you say yes here you get support for National Semiconductor LM93,
704 LM94, and compatible sensor chips.
706 This driver can also be built as a module. If so, the module
709 config SENSORS_LTC4151
710 tristate "Linear Technology LTC4151"
714 If you say yes here you get support for Linear Technology LTC4151
715 High Voltage I2C Current and Voltage Monitor interface.
717 This driver can also be built as a module. If so, the module will
720 config SENSORS_LTC4215
721 tristate "Linear Technology LTC4215"
725 If you say yes here you get support for Linear Technology LTC4215
726 Hot Swap Controller I2C interface.
728 This driver can also be built as a module. If so, the module will
731 config SENSORS_LTC4245
732 tristate "Linear Technology LTC4245"
736 If you say yes here you get support for Linear Technology LTC4245
737 Multiple Supply Hot Swap Controller I2C interface.
739 This driver can also be built as a module. If so, the module will
742 config SENSORS_LTC4261
743 tristate "Linear Technology LTC4261"
747 If you say yes here you get support for Linear Technology LTC4261
748 Negative Voltage Hot Swap Controller I2C interface.
750 This driver can also be built as a module. If so, the module will
753 config SENSORS_LM95241
754 tristate "National Semiconductor LM95241 and compatibles"
757 If you say yes here you get support for LM95231 and LM95241 sensor
760 This driver can also be built as a module. If so, the module
761 will be called lm95241.
763 config SENSORS_LM95245
764 tristate "National Semiconductor LM95245 sensor chip"
767 If you say yes here you get support for LM95245 sensor chip.
769 This driver can also be built as a module. If so, the module
770 will be called lm95245.
772 config SENSORS_MAX1111
773 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
774 depends on SPI_MASTER
776 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
779 This driver can also be built as a module. If so, the module
780 will be called max1111.
782 config SENSORS_MAX16065
783 tristate "Maxim MAX16065 System Manager and compatibles"
786 If you say yes here you get support for hardware monitoring
787 capabilities of the following Maxim System Manager chips.
795 This driver can also be built as a module. If so, the module
796 will be called max16065.
798 config SENSORS_MAX1619
799 tristate "Maxim MAX1619 sensor chip"
802 If you say yes here you get support for MAX1619 sensor chip.
804 This driver can also be built as a module. If so, the module
805 will be called max1619.
807 config SENSORS_MAX1668
808 tristate "Maxim MAX1668 and compatibles"
811 If you say yes here you get support for MAX1668, MAX1989 and
814 This driver can also be built as a module. If so, the module
815 will be called max1668.
817 config SENSORS_MAX197
818 tristate "Maxim MAX197 and compatibles"
820 Support for the Maxim MAX197 A/D converter.
821 Support will include, but not be limited to, MAX197, and MAX199.
823 This driver can also be built as a module. If so, the module
824 will be called max197.
826 config SENSORS_MAX6639
827 tristate "Maxim MAX6639 sensor chip"
830 If you say yes here you get support for the MAX6639
833 This driver can also be built as a module. If so, the module
834 will be called max6639.
836 config SENSORS_MAX6642
837 tristate "Maxim MAX6642 sensor chip"
840 If you say yes here you get support for MAX6642 sensor chip.
841 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
842 with Overtemperature Alarm from Maxim.
844 This driver can also be built as a module. If so, the module
845 will be called max6642.
847 config SENSORS_MAX6650
848 tristate "Maxim MAX6650 sensor chip"
851 If you say yes here you get support for the MAX6650 / MAX6651
854 This driver can also be built as a module. If so, the module
855 will be called max6650.
857 config SENSORS_MCP3021
858 tristate "Microchip MCP3021"
861 If you say yes here you get support for the MCP3021 chip
862 that is a A/D converter (ADC) with 10-bit resolution.
864 This driver can also be built as a module. If so, the module
865 will be called mcp3021.
867 config SENSORS_NTC_THERMISTOR
868 tristate "NTC thermistor support"
870 This driver supports NTC thermistors sensor reading and its
871 interpretation. The driver can also monitor the temperature and
872 send notifications about the temperature.
874 Currently, this driver supports
875 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
877 This driver can also be built as a module. If so, the module
878 will be called ntc-thermistor.
880 config SENSORS_PC87360
881 tristate "National Semiconductor PC87360 family"
885 If you say yes here you get access to the hardware monitoring
886 functions of the National Semiconductor PC8736x Super-I/O chips.
887 The PC87360, PC87363 and PC87364 only have fan monitoring and
888 control. The PC87365 and PC87366 additionally have voltage and
889 temperature monitoring.
891 This driver can also be built as a module. If so, the module
892 will be called pc87360.
894 config SENSORS_PC87427
895 tristate "National Semiconductor PC87427"
898 If you say yes here you get access to the hardware monitoring
899 functions of the National Semiconductor PC87427 Super-I/O chip.
900 The chip has two distinct logical devices, one for fan speed
901 monitoring and control, and one for voltage and temperature
902 monitoring. Fan speed monitoring and control are supported, as
903 well as temperature monitoring. Voltages aren't supported yet.
905 This driver can also be built as a module. If so, the module
906 will be called pc87427.
908 config SENSORS_PCF8591
909 tristate "Philips PCF8591 ADC/DAC"
913 If you say yes here you get support for Philips PCF8591 4-channel
914 ADC, 1-channel DAC chips.
916 This driver can also be built as a module. If so, the module
917 will be called pcf8591.
919 These devices are hard to detect and rarely found on mainstream
920 hardware. If unsure, say N.
922 source drivers/hwmon/pmbus/Kconfig
925 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
928 If you say yes here you get support for the Sensiron SHT10, SHT11,
929 SHT15, SHT71, SHT75 humidity and temperature sensors.
931 This driver can also be built as a module. If so, the module
932 will be called sht15.
935 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
938 If you say yes here you get support for the Sensiron SHT21, SHT25
939 humidity and temperature sensors.
941 This driver can also be built as a module. If so, the module
942 will be called sht21.
945 tristate "Samsung built-in ADC"
948 If you say yes here you get support for the on-board ADCs of
949 the Samsung S3C24XX, S3C64XX and other series of SoC
951 This driver can also be built as a module. If so, the module
952 will be called s3c-hwmon.
954 config SENSORS_S3C_RAW
955 bool "Include raw channel attributes in sysfs"
956 depends on SENSORS_S3C
958 Say Y here if you want to include raw copies of all the ADC
961 config SENSORS_SIS5595
962 tristate "Silicon Integrated Systems Corp. SiS5595"
965 If you say yes here you get support for the integrated sensors in
966 SiS5595 South Bridges.
968 This driver can also be built as a module. If so, the module
969 will be called sis5595.
971 config SENSORS_SMM665
972 tristate "Summit Microelectronics SMM665"
976 If you say yes here you get support for the hardware monitoring
977 features of the Summit Microelectronics SMM665/SMM665B Six-Channel
978 Active DC Output Controller / Monitor.
980 Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
981 Support for those chips is untested.
983 This driver can also be built as a module. If so, the module will
986 config SENSORS_DME1737
987 tristate "SMSC DME1737, SCH311x and compatibles"
988 depends on I2C && !PPC
991 If you say yes here you get support for the hardware monitoring
992 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
993 Asus A8000 Super-I/O chips.
995 This driver can also be built as a module. If so, the module
996 will be called dme1737.
998 config SENSORS_EMC1403
999 tristate "SMSC EMC1403/23 thermal sensor"
1002 If you say yes here you get support for the SMSC EMC1403/23
1003 temperature monitoring chip.
1005 Threshold values can be configured using sysfs.
1006 Data from the different diodes are accessible via sysfs.
1008 config SENSORS_EMC2103
1009 tristate "SMSC EMC2103"
1012 If you say yes here you get support for the temperature
1013 and fan sensors of the SMSC EMC2103 chips.
1015 This driver can also be built as a module. If so, the module
1016 will be called emc2103.
1018 config SENSORS_EMC6W201
1019 tristate "SMSC EMC6W201"
1022 If you say yes here you get support for the SMSC EMC6W201
1023 hardware monitoring chip.
1025 This driver can also be built as a module. If so, the module
1026 will be called emc6w201.
1028 config SENSORS_SMSC47M1
1029 tristate "SMSC LPC47M10x and compatibles"
1032 If you say yes here you get support for the integrated fan
1033 monitoring and control capabilities of the SMSC LPC47B27x,
1034 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1035 LPC47M192, LPC47M292 and LPC47M997 chips.
1037 The temperature and voltage sensor features of the LPC47M15x,
1038 LPC47M192, LPC47M292 and LPC47M997 are supported by another
1039 driver, select also "SMSC LPC47M192 and compatibles" below for
1042 This driver can also be built as a module. If so, the module
1043 will be called smsc47m1.
1045 config SENSORS_SMSC47M192
1046 tristate "SMSC LPC47M192 and compatibles"
1050 If you say yes here you get support for the temperature and
1051 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1052 and LPC47M997 chips.
1054 The fan monitoring and control capabilities of these chips
1055 are supported by another driver, select
1056 "SMSC LPC47M10x and compatibles" above. You need both drivers
1057 if you want fan control and voltage/temperature sensor support.
1059 This driver can also be built as a module. If so, the module
1060 will be called smsc47m192.
1062 config SENSORS_SMSC47B397
1063 tristate "SMSC LPC47B397-NC"
1066 If you say yes here you get support for the SMSC LPC47B397-NC
1069 This driver can also be built as a module. If so, the module
1070 will be called smsc47b397.
1072 config SENSORS_SCH56XX_COMMON
1076 config SENSORS_SCH5627
1077 tristate "SMSC SCH5627"
1078 depends on !PPC && WATCHDOG
1079 select SENSORS_SCH56XX_COMMON
1080 select WATCHDOG_CORE
1082 If you say yes here you get support for the hardware monitoring
1083 features of the SMSC SCH5627 Super-I/O chip including support for
1084 the integrated watchdog.
1086 This driver can also be built as a module. If so, the module
1087 will be called sch5627.
1089 config SENSORS_SCH5636
1090 tristate "SMSC SCH5636"
1091 depends on !PPC && WATCHDOG
1092 select SENSORS_SCH56XX_COMMON
1093 select WATCHDOG_CORE
1095 SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1096 hardware monitoring solutions, allowing motherboard manufacturers to
1097 create their own custom hwmon solution based upon the SCH5636.
1099 Currently this driver only supports the Fujitsu Theseus SCH5636 based
1100 hwmon solution. Say yes here if you want support for the Fujitsu
1101 Theseus' hardware monitoring features including support for the
1102 integrated watchdog.
1104 This driver can also be built as a module. If so, the module
1105 will be called sch5636.
1107 config SENSORS_ADS1015
1108 tristate "Texas Instruments ADS1015"
1111 If you say yes here you get support for Texas Instruments ADS1015
1112 12-bit 4-input ADC device.
1114 This driver can also be built as a module. If so, the module
1115 will be called ads1015.
1117 config SENSORS_ADS7828
1118 tristate "Texas Instruments ADS7828"
1121 If you say yes here you get support for Texas Instruments ADS7828
1122 12-bit 8-channel ADC device.
1124 This driver can also be built as a module. If so, the module
1125 will be called ads7828.
1127 config SENSORS_ADS7871
1128 tristate "Texas Instruments ADS7871 A/D converter"
1131 If you say yes here you get support for TI ADS7871 & ADS7870
1133 This driver can also be built as a module. If so, the module
1134 will be called ads7871.
1136 config SENSORS_AMC6821
1137 tristate "Texas Instruments AMC6821"
1140 If you say yes here you get support for the Texas Instruments
1141 AMC6821 hardware monitoring chips.
1143 This driver can also be build as a module. If so, the module
1144 will be called amc6821.
1146 config SENSORS_INA2XX
1147 tristate "Texas Instruments INA219 and compatibles"
1150 If you say yes here you get support for INA219, INA220, INA226, and
1151 INA230 power monitor chips.
1153 The INA2xx driver is configured for the default configuration of
1154 the part as described in the datasheet.
1155 Default value for Rshunt is 10 mOhms.
1156 This driver can also be built as a module. If so, the module
1157 will be called ina2xx.
1159 config SENSORS_THMC50
1160 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1163 If you say yes here you get support for Texas Instruments THMC50
1164 sensor chips and clones: the Analog Devices ADM1022.
1166 This driver can also be built as a module. If so, the module
1167 will be called thmc50.
1169 config SENSORS_TMP102
1170 tristate "Texas Instruments TMP102"
1173 If you say yes here you get support for Texas Instruments TMP102
1176 This driver can also be built as a module. If so, the module
1177 will be called tmp102.
1179 config SENSORS_TMP401
1180 tristate "Texas Instruments TMP401 and compatibles"
1183 If you say yes here you get support for Texas Instruments TMP401 and
1184 TMP411 temperature sensor chips.
1186 This driver can also be built as a module. If so, the module
1187 will be called tmp401.
1189 config SENSORS_TMP421
1190 tristate "Texas Instruments TMP421 and compatible"
1193 If you say yes here you get support for Texas Instruments TMP421,
1194 TMP422 and TMP423 temperature sensor chips.
1196 This driver can also be built as a module. If so, the module
1197 will be called tmp421.
1199 config SENSORS_TWL4030_MADC
1200 tristate "Texas Instruments TWL4030 MADC Hwmon"
1201 depends on TWL4030_MADC
1203 If you say yes here you get hwmon support for triton
1206 This driver can also be built as a module. If so it will be called
1209 config SENSORS_VIA_CPUTEMP
1210 tristate "VIA CPU temperature sensor"
1214 If you say yes here you get support for the temperature
1215 sensor inside your CPU. Supported are all known variants of
1216 the VIA C7 and Nano.
1218 config SENSORS_VIA686A
1222 If you say yes here you get support for the integrated sensors in
1223 Via 686A/B South Bridges.
1225 This driver can also be built as a module. If so, the module
1226 will be called via686a.
1228 config SENSORS_VT1211
1229 tristate "VIA VT1211"
1233 If you say yes here then you get support for hardware monitoring
1234 features of the VIA VT1211 Super-I/O chip.
1236 This driver can also be built as a module. If so, the module
1237 will be called vt1211.
1239 config SENSORS_VT8231
1240 tristate "VIA VT8231"
1244 If you say yes here then you get support for the integrated sensors
1245 in the VIA VT8231 device.
1247 This driver can also be built as a module. If so, the module
1248 will be called vt8231.
1250 config SENSORS_W83781D
1251 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1255 If you say yes here you get support for the Winbond W8378x series
1256 of sensor chips: the W83781D, W83782D and W83783S, and the similar
1259 This driver can also be built as a module. If so, the module
1260 will be called w83781d.
1262 config SENSORS_W83791D
1263 tristate "Winbond W83791D"
1267 If you say yes here you get support for the Winbond W83791D chip.
1269 This driver can also be built as a module. If so, the module
1270 will be called w83791d.
1272 config SENSORS_W83792D
1273 tristate "Winbond W83792D"
1276 If you say yes here you get support for the Winbond W83792D chip.
1278 This driver can also be built as a module. If so, the module
1279 will be called w83792d.
1281 config SENSORS_W83793
1282 tristate "Winbond W83793"
1286 If you say yes here you get support for the Winbond W83793
1287 hardware monitoring chip, including support for the integrated
1290 This driver can also be built as a module. If so, the module
1291 will be called w83793.
1293 config SENSORS_W83795
1294 tristate "Winbond/Nuvoton W83795G/ADG"
1297 If you say yes here you get support for the Winbond W83795G and
1298 W83795ADG hardware monitoring chip, including manual fan speed
1301 This driver can also be built as a module. If so, the module
1302 will be called w83795.
1304 config SENSORS_W83795_FANCTRL
1305 boolean "Include automatic fan control support (DANGEROUS)"
1306 depends on SENSORS_W83795
1309 If you say yes here, support for automatic fan speed control
1310 will be included in the driver.
1312 This part of the code wasn't carefully reviewed and tested yet,
1313 so enabling this option is strongly discouraged on production
1314 servers. Only developers and testers should enable it for the
1317 Please also note that this option will create sysfs attribute
1318 files which may change in the future, so you shouldn't rely
1319 on them being stable.
1321 config SENSORS_W83L785TS
1322 tristate "Winbond W83L785TS-S"
1325 If you say yes here you get support for the Winbond W83L785TS-S
1326 sensor chip, which is used on the Asus A7N8X, among other
1329 This driver can also be built as a module. If so, the module
1330 will be called w83l785ts.
1332 config SENSORS_W83L786NG
1333 tristate "Winbond W83L786NG, W83L786NR"
1336 If you say yes here you get support for the Winbond W83L786NG
1337 and W83L786NR sensor chips.
1339 This driver can also be built as a module. If so, the module
1340 will be called w83l786ng.
1342 config SENSORS_W83627HF
1343 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1347 If you say yes here you get support for the Winbond W836X7 series
1348 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1351 This driver can also be built as a module. If so, the module
1352 will be called w83627hf.
1354 config SENSORS_W83627EHF
1355 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1359 If you say yes here you get support for the hardware
1360 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1362 This driver also supports the W83627EHG, which is the lead-free
1363 version of the W83627EHF, and the W83627DHG, which is a similar
1364 chip suited for specific Intel processors that use PECI such as
1365 the Core 2 Duo. And also the W83627UHG, which is a stripped down
1366 version of the W83627DHG (as far as hardware monitoring goes.)
1368 This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1369 (also known as W83667HG-I), and NCT6776F.
1371 This driver can also be built as a module. If so, the module
1372 will be called w83627ehf.
1374 config SENSORS_WM831X
1375 tristate "WM831x PMICs"
1376 depends on MFD_WM831X
1378 If you say yes here you get support for the hardware
1379 monitoring functionality of the Wolfson Microelectronics
1380 WM831x series of PMICs.
1382 This driver can also be built as a module. If so, the module
1383 will be called wm831x-hwmon.
1385 config SENSORS_WM8350
1386 tristate "Wolfson Microelectronics WM835x"
1387 depends on MFD_WM8350
1389 If you say yes here you get support for the hardware
1390 monitoring features of the WM835x series of PMICs.
1392 This driver can also be built as a module. If so, the module
1393 will be called wm8350-hwmon.
1395 config SENSORS_ULTRA45
1396 tristate "Sun Ultra45 PIC16F747"
1399 This driver provides support for the Ultra45 workstation environmental
1402 config SENSORS_APPLESMC
1403 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1404 depends on INPUT && X86
1407 select INPUT_POLLDEV
1410 This driver provides support for the Apple System Management
1411 Controller, which provides an accelerometer (Apple Sudden Motion
1412 Sensor), light sensors, temperature sensors, keyboard backlight
1413 control and fan control.
1415 Only Intel-based Apple's computers are supported (MacBook Pro,
1418 Data from the different sensors, keyboard backlight control and fan
1419 control are accessible via sysfs.
1421 This driver also provides an absolute input class device, allowing
1422 the laptop to act as a pinball machine-esque joystick.
1424 Say Y here if you have an applicable laptop and want to experience
1425 the awesome power of applesmc.
1427 config SENSORS_MC13783_ADC
1428 tristate "Freescale MC13783/MC13892 ADC"
1429 depends on MFD_MC13XXX
1431 Support for the A/D converter on MC13783 and MC13892 PMIC.
1435 comment "ACPI drivers"
1437 config SENSORS_ACPI_POWER
1438 tristate "ACPI 4.0 power meter"
1440 This driver exposes ACPI 4.0 power meters as hardware monitoring
1441 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
1444 To compile this driver as a module, choose M here:
1445 the module will be called acpi_power_meter.
1447 config SENSORS_ATK0110
1448 tristate "ASUS ATK0110"
1451 If you say yes here you get support for the ACPI hardware
1452 monitoring interface found in many ASUS motherboards. This
1453 driver will provide readings of fans, voltages and temperatures
1454 through the system firmware.
1456 This driver can also be built as a module. If so, the module
1457 will be called asus_atk0110.