2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/dmi.h>
28 #include <linux/module.h>
29 #include <linux/input.h>
30 #include <linux/i2c.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/vgaarb.h>
34 #include <drm/drm_edid.h>
36 #include "intel_drv.h"
37 #include <drm/i915_drm.h>
39 #include "i915_trace.h"
40 #include <drm/drm_dp_helper.h>
41 #include <drm/drm_crtc_helper.h>
42 #include <linux/dma_remapping.h>
44 #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
46 bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
47 static void intel_increase_pllclock(struct drm_crtc *crtc);
48 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
71 #define INTEL_P2_NUM 2
72 typedef struct intel_limit intel_limit_t;
74 intel_range_t dot, vco, n, m, m1, m2, p, p1;
76 bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
77 int, int, intel_clock_t *, intel_clock_t *);
81 #define IRONLAKE_FDI_FREQ 2700000 /* in kHz for mode->clock */
84 intel_pch_rawclk(struct drm_device *dev)
86 struct drm_i915_private *dev_priv = dev->dev_private;
88 WARN_ON(!HAS_PCH_SPLIT(dev));
90 return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
94 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
95 int target, int refclk, intel_clock_t *match_clock,
96 intel_clock_t *best_clock);
98 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
99 int target, int refclk, intel_clock_t *match_clock,
100 intel_clock_t *best_clock);
103 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
104 int target, int refclk, intel_clock_t *match_clock,
105 intel_clock_t *best_clock);
107 intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
108 int target, int refclk, intel_clock_t *match_clock,
109 intel_clock_t *best_clock);
112 intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
113 int target, int refclk, intel_clock_t *match_clock,
114 intel_clock_t *best_clock);
116 static inline u32 /* units of 100MHz */
117 intel_fdi_link_freq(struct drm_device *dev)
120 struct drm_i915_private *dev_priv = dev->dev_private;
121 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
126 static const intel_limit_t intel_limits_i8xx_dvo = {
127 .dot = { .min = 25000, .max = 350000 },
128 .vco = { .min = 930000, .max = 1400000 },
129 .n = { .min = 3, .max = 16 },
130 .m = { .min = 96, .max = 140 },
131 .m1 = { .min = 18, .max = 26 },
132 .m2 = { .min = 6, .max = 16 },
133 .p = { .min = 4, .max = 128 },
134 .p1 = { .min = 2, .max = 33 },
135 .p2 = { .dot_limit = 165000,
136 .p2_slow = 4, .p2_fast = 2 },
137 .find_pll = intel_find_best_PLL,
140 static const intel_limit_t intel_limits_i8xx_lvds = {
141 .dot = { .min = 25000, .max = 350000 },
142 .vco = { .min = 930000, .max = 1400000 },
143 .n = { .min = 3, .max = 16 },
144 .m = { .min = 96, .max = 140 },
145 .m1 = { .min = 18, .max = 26 },
146 .m2 = { .min = 6, .max = 16 },
147 .p = { .min = 4, .max = 128 },
148 .p1 = { .min = 1, .max = 6 },
149 .p2 = { .dot_limit = 165000,
150 .p2_slow = 14, .p2_fast = 7 },
151 .find_pll = intel_find_best_PLL,
154 static const intel_limit_t intel_limits_i9xx_sdvo = {
155 .dot = { .min = 20000, .max = 400000 },
156 .vco = { .min = 1400000, .max = 2800000 },
157 .n = { .min = 1, .max = 6 },
158 .m = { .min = 70, .max = 120 },
159 .m1 = { .min = 10, .max = 22 },
160 .m2 = { .min = 5, .max = 9 },
161 .p = { .min = 5, .max = 80 },
162 .p1 = { .min = 1, .max = 8 },
163 .p2 = { .dot_limit = 200000,
164 .p2_slow = 10, .p2_fast = 5 },
165 .find_pll = intel_find_best_PLL,
168 static const intel_limit_t intel_limits_i9xx_lvds = {
169 .dot = { .min = 20000, .max = 400000 },
170 .vco = { .min = 1400000, .max = 2800000 },
171 .n = { .min = 1, .max = 6 },
172 .m = { .min = 70, .max = 120 },
173 .m1 = { .min = 10, .max = 22 },
174 .m2 = { .min = 5, .max = 9 },
175 .p = { .min = 7, .max = 98 },
176 .p1 = { .min = 1, .max = 8 },
177 .p2 = { .dot_limit = 112000,
178 .p2_slow = 14, .p2_fast = 7 },
179 .find_pll = intel_find_best_PLL,
183 static const intel_limit_t intel_limits_g4x_sdvo = {
184 .dot = { .min = 25000, .max = 270000 },
185 .vco = { .min = 1750000, .max = 3500000},
186 .n = { .min = 1, .max = 4 },
187 .m = { .min = 104, .max = 138 },
188 .m1 = { .min = 17, .max = 23 },
189 .m2 = { .min = 5, .max = 11 },
190 .p = { .min = 10, .max = 30 },
191 .p1 = { .min = 1, .max = 3},
192 .p2 = { .dot_limit = 270000,
196 .find_pll = intel_g4x_find_best_PLL,
199 static const intel_limit_t intel_limits_g4x_hdmi = {
200 .dot = { .min = 22000, .max = 400000 },
201 .vco = { .min = 1750000, .max = 3500000},
202 .n = { .min = 1, .max = 4 },
203 .m = { .min = 104, .max = 138 },
204 .m1 = { .min = 16, .max = 23 },
205 .m2 = { .min = 5, .max = 11 },
206 .p = { .min = 5, .max = 80 },
207 .p1 = { .min = 1, .max = 8},
208 .p2 = { .dot_limit = 165000,
209 .p2_slow = 10, .p2_fast = 5 },
210 .find_pll = intel_g4x_find_best_PLL,
213 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
214 .dot = { .min = 20000, .max = 115000 },
215 .vco = { .min = 1750000, .max = 3500000 },
216 .n = { .min = 1, .max = 3 },
217 .m = { .min = 104, .max = 138 },
218 .m1 = { .min = 17, .max = 23 },
219 .m2 = { .min = 5, .max = 11 },
220 .p = { .min = 28, .max = 112 },
221 .p1 = { .min = 2, .max = 8 },
222 .p2 = { .dot_limit = 0,
223 .p2_slow = 14, .p2_fast = 14
225 .find_pll = intel_g4x_find_best_PLL,
228 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
229 .dot = { .min = 80000, .max = 224000 },
230 .vco = { .min = 1750000, .max = 3500000 },
231 .n = { .min = 1, .max = 3 },
232 .m = { .min = 104, .max = 138 },
233 .m1 = { .min = 17, .max = 23 },
234 .m2 = { .min = 5, .max = 11 },
235 .p = { .min = 14, .max = 42 },
236 .p1 = { .min = 2, .max = 6 },
237 .p2 = { .dot_limit = 0,
238 .p2_slow = 7, .p2_fast = 7
240 .find_pll = intel_g4x_find_best_PLL,
243 static const intel_limit_t intel_limits_g4x_display_port = {
244 .dot = { .min = 161670, .max = 227000 },
245 .vco = { .min = 1750000, .max = 3500000},
246 .n = { .min = 1, .max = 2 },
247 .m = { .min = 97, .max = 108 },
248 .m1 = { .min = 0x10, .max = 0x12 },
249 .m2 = { .min = 0x05, .max = 0x06 },
250 .p = { .min = 10, .max = 20 },
251 .p1 = { .min = 1, .max = 2},
252 .p2 = { .dot_limit = 0,
253 .p2_slow = 10, .p2_fast = 10 },
254 .find_pll = intel_find_pll_g4x_dp,
257 static const intel_limit_t intel_limits_pineview_sdvo = {
258 .dot = { .min = 20000, .max = 400000},
259 .vco = { .min = 1700000, .max = 3500000 },
260 /* Pineview's Ncounter is a ring counter */
261 .n = { .min = 3, .max = 6 },
262 .m = { .min = 2, .max = 256 },
263 /* Pineview only has one combined m divider, which we treat as m2. */
264 .m1 = { .min = 0, .max = 0 },
265 .m2 = { .min = 0, .max = 254 },
266 .p = { .min = 5, .max = 80 },
267 .p1 = { .min = 1, .max = 8 },
268 .p2 = { .dot_limit = 200000,
269 .p2_slow = 10, .p2_fast = 5 },
270 .find_pll = intel_find_best_PLL,
273 static const intel_limit_t intel_limits_pineview_lvds = {
274 .dot = { .min = 20000, .max = 400000 },
275 .vco = { .min = 1700000, .max = 3500000 },
276 .n = { .min = 3, .max = 6 },
277 .m = { .min = 2, .max = 256 },
278 .m1 = { .min = 0, .max = 0 },
279 .m2 = { .min = 0, .max = 254 },
280 .p = { .min = 7, .max = 112 },
281 .p1 = { .min = 1, .max = 8 },
282 .p2 = { .dot_limit = 112000,
283 .p2_slow = 14, .p2_fast = 14 },
284 .find_pll = intel_find_best_PLL,
287 /* Ironlake / Sandybridge
289 * We calculate clock using (register_value + 2) for N/M1/M2, so here
290 * the range value for them is (actual_value - 2).
292 static const intel_limit_t intel_limits_ironlake_dac = {
293 .dot = { .min = 25000, .max = 350000 },
294 .vco = { .min = 1760000, .max = 3510000 },
295 .n = { .min = 1, .max = 5 },
296 .m = { .min = 79, .max = 127 },
297 .m1 = { .min = 12, .max = 22 },
298 .m2 = { .min = 5, .max = 9 },
299 .p = { .min = 5, .max = 80 },
300 .p1 = { .min = 1, .max = 8 },
301 .p2 = { .dot_limit = 225000,
302 .p2_slow = 10, .p2_fast = 5 },
303 .find_pll = intel_g4x_find_best_PLL,
306 static const intel_limit_t intel_limits_ironlake_single_lvds = {
307 .dot = { .min = 25000, .max = 350000 },
308 .vco = { .min = 1760000, .max = 3510000 },
309 .n = { .min = 1, .max = 3 },
310 .m = { .min = 79, .max = 118 },
311 .m1 = { .min = 12, .max = 22 },
312 .m2 = { .min = 5, .max = 9 },
313 .p = { .min = 28, .max = 112 },
314 .p1 = { .min = 2, .max = 8 },
315 .p2 = { .dot_limit = 225000,
316 .p2_slow = 14, .p2_fast = 14 },
317 .find_pll = intel_g4x_find_best_PLL,
320 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
321 .dot = { .min = 25000, .max = 350000 },
322 .vco = { .min = 1760000, .max = 3510000 },
323 .n = { .min = 1, .max = 3 },
324 .m = { .min = 79, .max = 127 },
325 .m1 = { .min = 12, .max = 22 },
326 .m2 = { .min = 5, .max = 9 },
327 .p = { .min = 14, .max = 56 },
328 .p1 = { .min = 2, .max = 8 },
329 .p2 = { .dot_limit = 225000,
330 .p2_slow = 7, .p2_fast = 7 },
331 .find_pll = intel_g4x_find_best_PLL,
334 /* LVDS 100mhz refclk limits. */
335 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
336 .dot = { .min = 25000, .max = 350000 },
337 .vco = { .min = 1760000, .max = 3510000 },
338 .n = { .min = 1, .max = 2 },
339 .m = { .min = 79, .max = 126 },
340 .m1 = { .min = 12, .max = 22 },
341 .m2 = { .min = 5, .max = 9 },
342 .p = { .min = 28, .max = 112 },
343 .p1 = { .min = 2, .max = 8 },
344 .p2 = { .dot_limit = 225000,
345 .p2_slow = 14, .p2_fast = 14 },
346 .find_pll = intel_g4x_find_best_PLL,
349 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
350 .dot = { .min = 25000, .max = 350000 },
351 .vco = { .min = 1760000, .max = 3510000 },
352 .n = { .min = 1, .max = 3 },
353 .m = { .min = 79, .max = 126 },
354 .m1 = { .min = 12, .max = 22 },
355 .m2 = { .min = 5, .max = 9 },
356 .p = { .min = 14, .max = 42 },
357 .p1 = { .min = 2, .max = 6 },
358 .p2 = { .dot_limit = 225000,
359 .p2_slow = 7, .p2_fast = 7 },
360 .find_pll = intel_g4x_find_best_PLL,
363 static const intel_limit_t intel_limits_ironlake_display_port = {
364 .dot = { .min = 25000, .max = 350000 },
365 .vco = { .min = 1760000, .max = 3510000},
366 .n = { .min = 1, .max = 2 },
367 .m = { .min = 81, .max = 90 },
368 .m1 = { .min = 12, .max = 22 },
369 .m2 = { .min = 5, .max = 9 },
370 .p = { .min = 10, .max = 20 },
371 .p1 = { .min = 1, .max = 2},
372 .p2 = { .dot_limit = 0,
373 .p2_slow = 10, .p2_fast = 10 },
374 .find_pll = intel_find_pll_ironlake_dp,
377 static const intel_limit_t intel_limits_vlv_dac = {
378 .dot = { .min = 25000, .max = 270000 },
379 .vco = { .min = 4000000, .max = 6000000 },
380 .n = { .min = 1, .max = 7 },
381 .m = { .min = 22, .max = 450 }, /* guess */
382 .m1 = { .min = 2, .max = 3 },
383 .m2 = { .min = 11, .max = 156 },
384 .p = { .min = 10, .max = 30 },
385 .p1 = { .min = 2, .max = 3 },
386 .p2 = { .dot_limit = 270000,
387 .p2_slow = 2, .p2_fast = 20 },
388 .find_pll = intel_vlv_find_best_pll,
391 static const intel_limit_t intel_limits_vlv_hdmi = {
392 .dot = { .min = 20000, .max = 165000 },
393 .vco = { .min = 4000000, .max = 5994000},
394 .n = { .min = 1, .max = 7 },
395 .m = { .min = 60, .max = 300 }, /* guess */
396 .m1 = { .min = 2, .max = 3 },
397 .m2 = { .min = 11, .max = 156 },
398 .p = { .min = 10, .max = 30 },
399 .p1 = { .min = 2, .max = 3 },
400 .p2 = { .dot_limit = 270000,
401 .p2_slow = 2, .p2_fast = 20 },
402 .find_pll = intel_vlv_find_best_pll,
405 static const intel_limit_t intel_limits_vlv_dp = {
406 .dot = { .min = 25000, .max = 270000 },
407 .vco = { .min = 4000000, .max = 6000000 },
408 .n = { .min = 1, .max = 7 },
409 .m = { .min = 22, .max = 450 },
410 .m1 = { .min = 2, .max = 3 },
411 .m2 = { .min = 11, .max = 156 },
412 .p = { .min = 10, .max = 30 },
413 .p1 = { .min = 2, .max = 3 },
414 .p2 = { .dot_limit = 270000,
415 .p2_slow = 2, .p2_fast = 20 },
416 .find_pll = intel_vlv_find_best_pll,
419 u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
424 spin_lock_irqsave(&dev_priv->dpio_lock, flags);
425 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
426 DRM_ERROR("DPIO idle wait timed out\n");
430 I915_WRITE(DPIO_REG, reg);
431 I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
433 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
434 DRM_ERROR("DPIO read wait timed out\n");
437 val = I915_READ(DPIO_DATA);
440 spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
444 static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
449 spin_lock_irqsave(&dev_priv->dpio_lock, flags);
450 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
451 DRM_ERROR("DPIO idle wait timed out\n");
455 I915_WRITE(DPIO_DATA, val);
456 I915_WRITE(DPIO_REG, reg);
457 I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
459 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
460 DRM_ERROR("DPIO write wait timed out\n");
463 spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
466 static void vlv_init_dpio(struct drm_device *dev)
468 struct drm_i915_private *dev_priv = dev->dev_private;
470 /* Reset the DPIO config */
471 I915_WRITE(DPIO_CTL, 0);
472 POSTING_READ(DPIO_CTL);
473 I915_WRITE(DPIO_CTL, 1);
474 POSTING_READ(DPIO_CTL);
477 static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
479 DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
483 static const struct dmi_system_id intel_dual_link_lvds[] = {
485 .callback = intel_dual_link_lvds_callback,
486 .ident = "Apple MacBook Pro (Core i5/i7 Series)",
488 DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
489 DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
492 { } /* terminating entry */
495 static bool is_dual_link_lvds(struct drm_i915_private *dev_priv,
500 /* use the module option value if specified */
501 if (i915_lvds_channel_mode > 0)
502 return i915_lvds_channel_mode == 2;
504 if (dmi_check_system(intel_dual_link_lvds))
507 if (dev_priv->lvds_val)
508 val = dev_priv->lvds_val;
510 /* BIOS should set the proper LVDS register value at boot, but
511 * in reality, it doesn't set the value when the lid is closed;
512 * we need to check "the value to be set" in VBT when LVDS
513 * register is uninitialized.
515 val = I915_READ(reg);
516 if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
517 val = dev_priv->bios_lvds_val;
518 dev_priv->lvds_val = val;
520 return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
523 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
526 struct drm_device *dev = crtc->dev;
527 struct drm_i915_private *dev_priv = dev->dev_private;
528 const intel_limit_t *limit;
530 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
531 if (is_dual_link_lvds(dev_priv, PCH_LVDS)) {
532 /* LVDS dual channel */
533 if (refclk == 100000)
534 limit = &intel_limits_ironlake_dual_lvds_100m;
536 limit = &intel_limits_ironlake_dual_lvds;
538 if (refclk == 100000)
539 limit = &intel_limits_ironlake_single_lvds_100m;
541 limit = &intel_limits_ironlake_single_lvds;
543 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
545 limit = &intel_limits_ironlake_display_port;
547 limit = &intel_limits_ironlake_dac;
552 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
554 struct drm_device *dev = crtc->dev;
555 struct drm_i915_private *dev_priv = dev->dev_private;
556 const intel_limit_t *limit;
558 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
559 if (is_dual_link_lvds(dev_priv, LVDS))
560 /* LVDS with dual channel */
561 limit = &intel_limits_g4x_dual_channel_lvds;
563 /* LVDS with dual channel */
564 limit = &intel_limits_g4x_single_channel_lvds;
565 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
566 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
567 limit = &intel_limits_g4x_hdmi;
568 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
569 limit = &intel_limits_g4x_sdvo;
570 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
571 limit = &intel_limits_g4x_display_port;
572 } else /* The option is for other outputs */
573 limit = &intel_limits_i9xx_sdvo;
578 static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
580 struct drm_device *dev = crtc->dev;
581 const intel_limit_t *limit;
583 if (HAS_PCH_SPLIT(dev))
584 limit = intel_ironlake_limit(crtc, refclk);
585 else if (IS_G4X(dev)) {
586 limit = intel_g4x_limit(crtc);
587 } else if (IS_PINEVIEW(dev)) {
588 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
589 limit = &intel_limits_pineview_lvds;
591 limit = &intel_limits_pineview_sdvo;
592 } else if (IS_VALLEYVIEW(dev)) {
593 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG))
594 limit = &intel_limits_vlv_dac;
595 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
596 limit = &intel_limits_vlv_hdmi;
598 limit = &intel_limits_vlv_dp;
599 } else if (!IS_GEN2(dev)) {
600 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
601 limit = &intel_limits_i9xx_lvds;
603 limit = &intel_limits_i9xx_sdvo;
605 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
606 limit = &intel_limits_i8xx_lvds;
608 limit = &intel_limits_i8xx_dvo;
613 /* m1 is reserved as 0 in Pineview, n is a ring counter */
614 static void pineview_clock(int refclk, intel_clock_t *clock)
616 clock->m = clock->m2 + 2;
617 clock->p = clock->p1 * clock->p2;
618 clock->vco = refclk * clock->m / clock->n;
619 clock->dot = clock->vco / clock->p;
622 static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
624 if (IS_PINEVIEW(dev)) {
625 pineview_clock(refclk, clock);
628 clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
629 clock->p = clock->p1 * clock->p2;
630 clock->vco = refclk * clock->m / (clock->n + 2);
631 clock->dot = clock->vco / clock->p;
635 * Returns whether any output on the specified pipe is of the specified type
637 bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
639 struct drm_device *dev = crtc->dev;
640 struct intel_encoder *encoder;
642 for_each_encoder_on_crtc(dev, crtc, encoder)
643 if (encoder->type == type)
649 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
651 * Returns whether the given set of divisors are valid for a given refclk with
652 * the given connectors.
655 static bool intel_PLL_is_valid(struct drm_device *dev,
656 const intel_limit_t *limit,
657 const intel_clock_t *clock)
659 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
660 INTELPllInvalid("p1 out of range\n");
661 if (clock->p < limit->p.min || limit->p.max < clock->p)
662 INTELPllInvalid("p out of range\n");
663 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
664 INTELPllInvalid("m2 out of range\n");
665 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
666 INTELPllInvalid("m1 out of range\n");
667 if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
668 INTELPllInvalid("m1 <= m2\n");
669 if (clock->m < limit->m.min || limit->m.max < clock->m)
670 INTELPllInvalid("m out of range\n");
671 if (clock->n < limit->n.min || limit->n.max < clock->n)
672 INTELPllInvalid("n out of range\n");
673 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
674 INTELPllInvalid("vco out of range\n");
675 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
676 * connector, etc., rather than just a single range.
678 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
679 INTELPllInvalid("dot out of range\n");
685 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
686 int target, int refclk, intel_clock_t *match_clock,
687 intel_clock_t *best_clock)
690 struct drm_device *dev = crtc->dev;
691 struct drm_i915_private *dev_priv = dev->dev_private;
695 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
696 (I915_READ(LVDS)) != 0) {
698 * For LVDS, if the panel is on, just rely on its current
699 * settings for dual-channel. We haven't figured out how to
700 * reliably set up different single/dual channel state, if we
703 if (is_dual_link_lvds(dev_priv, LVDS))
704 clock.p2 = limit->p2.p2_fast;
706 clock.p2 = limit->p2.p2_slow;
708 if (target < limit->p2.dot_limit)
709 clock.p2 = limit->p2.p2_slow;
711 clock.p2 = limit->p2.p2_fast;
714 memset(best_clock, 0, sizeof(*best_clock));
716 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
718 for (clock.m2 = limit->m2.min;
719 clock.m2 <= limit->m2.max; clock.m2++) {
720 /* m1 is always 0 in Pineview */
721 if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
723 for (clock.n = limit->n.min;
724 clock.n <= limit->n.max; clock.n++) {
725 for (clock.p1 = limit->p1.min;
726 clock.p1 <= limit->p1.max; clock.p1++) {
729 intel_clock(dev, refclk, &clock);
730 if (!intel_PLL_is_valid(dev, limit,
734 clock.p != match_clock->p)
737 this_err = abs(clock.dot - target);
738 if (this_err < err) {
747 return (err != target);
751 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
752 int target, int refclk, intel_clock_t *match_clock,
753 intel_clock_t *best_clock)
755 struct drm_device *dev = crtc->dev;
756 struct drm_i915_private *dev_priv = dev->dev_private;
760 /* approximately equals target * 0.00585 */
761 int err_most = (target >> 8) + (target >> 9);
764 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
767 if (HAS_PCH_SPLIT(dev))
771 if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
773 clock.p2 = limit->p2.p2_fast;
775 clock.p2 = limit->p2.p2_slow;
777 if (target < limit->p2.dot_limit)
778 clock.p2 = limit->p2.p2_slow;
780 clock.p2 = limit->p2.p2_fast;
783 memset(best_clock, 0, sizeof(*best_clock));
784 max_n = limit->n.max;
785 /* based on hardware requirement, prefer smaller n to precision */
786 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
787 /* based on hardware requirement, prefere larger m1,m2 */
788 for (clock.m1 = limit->m1.max;
789 clock.m1 >= limit->m1.min; clock.m1--) {
790 for (clock.m2 = limit->m2.max;
791 clock.m2 >= limit->m2.min; clock.m2--) {
792 for (clock.p1 = limit->p1.max;
793 clock.p1 >= limit->p1.min; clock.p1--) {
796 intel_clock(dev, refclk, &clock);
797 if (!intel_PLL_is_valid(dev, limit,
801 clock.p != match_clock->p)
804 this_err = abs(clock.dot - target);
805 if (this_err < err_most) {
819 intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
820 int target, int refclk, intel_clock_t *match_clock,
821 intel_clock_t *best_clock)
823 struct drm_device *dev = crtc->dev;
826 if (target < 200000) {
839 intel_clock(dev, refclk, &clock);
840 memcpy(best_clock, &clock, sizeof(intel_clock_t));
844 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
846 intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
847 int target, int refclk, intel_clock_t *match_clock,
848 intel_clock_t *best_clock)
851 if (target < 200000) {
864 clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
865 clock.p = (clock.p1 * clock.p2);
866 clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
868 memcpy(best_clock, &clock, sizeof(intel_clock_t));
872 intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
873 int target, int refclk, intel_clock_t *match_clock,
874 intel_clock_t *best_clock)
876 u32 p1, p2, m1, m2, vco, bestn, bestm1, bestm2, bestp1, bestp2;
878 u32 updrate, minupdate, fracbits, p;
879 unsigned long bestppm, ppm, absppm;
883 dotclk = target * 1000;
886 fastclk = dotclk / (2*100);
890 n = p = p1 = p2 = m = m1 = m2 = vco = bestn = 0;
891 bestm1 = bestm2 = bestp1 = bestp2 = 0;
893 /* based on hardware requirement, prefer smaller n to precision */
894 for (n = limit->n.min; n <= ((refclk) / minupdate); n++) {
895 updrate = refclk / n;
896 for (p1 = limit->p1.max; p1 > limit->p1.min; p1--) {
897 for (p2 = limit->p2.p2_fast+1; p2 > 0; p2--) {
901 /* based on hardware requirement, prefer bigger m1,m2 values */
902 for (m1 = limit->m1.min; m1 <= limit->m1.max; m1++) {
903 m2 = (((2*(fastclk * p * n / m1 )) +
904 refclk) / (2*refclk));
907 if (vco >= limit->vco.min && vco < limit->vco.max) {
908 ppm = 1000000 * ((vco / p) - fastclk) / fastclk;
909 absppm = (ppm > 0) ? ppm : (-ppm);
910 if (absppm < 100 && ((p1 * p2) > (bestp1 * bestp2))) {
914 if (absppm < bestppm - 10) {
931 best_clock->n = bestn;
932 best_clock->m1 = bestm1;
933 best_clock->m2 = bestm2;
934 best_clock->p1 = bestp1;
935 best_clock->p2 = bestp2;
940 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
943 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
944 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
946 return intel_crtc->cpu_transcoder;
949 static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe)
951 struct drm_i915_private *dev_priv = dev->dev_private;
952 u32 frame, frame_reg = PIPEFRAME(pipe);
954 frame = I915_READ(frame_reg);
956 if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
957 DRM_DEBUG_KMS("vblank wait timed out\n");
961 * intel_wait_for_vblank - wait for vblank on a given pipe
963 * @pipe: pipe to wait for
965 * Wait for vblank to occur on a given pipe. Needed for various bits of
968 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
970 struct drm_i915_private *dev_priv = dev->dev_private;
971 int pipestat_reg = PIPESTAT(pipe);
973 if (INTEL_INFO(dev)->gen >= 5) {
974 ironlake_wait_for_vblank(dev, pipe);
978 /* Clear existing vblank status. Note this will clear any other
979 * sticky status fields as well.
981 * This races with i915_driver_irq_handler() with the result
982 * that either function could miss a vblank event. Here it is not
983 * fatal, as we will either wait upon the next vblank interrupt or
984 * timeout. Generally speaking intel_wait_for_vblank() is only
985 * called during modeset at which time the GPU should be idle and
986 * should *not* be performing page flips and thus not waiting on
988 * Currently, the result of us stealing a vblank from the irq
989 * handler is that a single frame will be skipped during swapbuffers.
991 I915_WRITE(pipestat_reg,
992 I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
994 /* Wait for vblank interrupt bit to set */
995 if (wait_for(I915_READ(pipestat_reg) &
996 PIPE_VBLANK_INTERRUPT_STATUS,
998 DRM_DEBUG_KMS("vblank wait timed out\n");
1002 * intel_wait_for_pipe_off - wait for pipe to turn off
1004 * @pipe: pipe to wait for
1006 * After disabling a pipe, we can't wait for vblank in the usual way,
1007 * spinning on the vblank interrupt status bit, since we won't actually
1008 * see an interrupt when the pipe is disabled.
1010 * On Gen4 and above:
1011 * wait for the pipe register state bit to turn off
1014 * wait for the display line value to settle (it usually
1015 * ends up stopping at the start of the next frame).
1018 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
1020 struct drm_i915_private *dev_priv = dev->dev_private;
1021 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1024 if (INTEL_INFO(dev)->gen >= 4) {
1025 int reg = PIPECONF(cpu_transcoder);
1027 /* Wait for the Pipe State to go off */
1028 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
1030 WARN(1, "pipe_off wait timed out\n");
1032 u32 last_line, line_mask;
1033 int reg = PIPEDSL(pipe);
1034 unsigned long timeout = jiffies + msecs_to_jiffies(100);
1037 line_mask = DSL_LINEMASK_GEN2;
1039 line_mask = DSL_LINEMASK_GEN3;
1041 /* Wait for the display line to settle */
1043 last_line = I915_READ(reg) & line_mask;
1045 } while (((I915_READ(reg) & line_mask) != last_line) &&
1046 time_after(timeout, jiffies));
1047 if (time_after(jiffies, timeout))
1048 WARN(1, "pipe_off wait timed out\n");
1052 static const char *state_string(bool enabled)
1054 return enabled ? "on" : "off";
1057 /* Only for pre-ILK configs */
1058 static void assert_pll(struct drm_i915_private *dev_priv,
1059 enum pipe pipe, bool state)
1066 val = I915_READ(reg);
1067 cur_state = !!(val & DPLL_VCO_ENABLE);
1068 WARN(cur_state != state,
1069 "PLL state assertion failure (expected %s, current %s)\n",
1070 state_string(state), state_string(cur_state));
1072 #define assert_pll_enabled(d, p) assert_pll(d, p, true)
1073 #define assert_pll_disabled(d, p) assert_pll(d, p, false)
1076 static void assert_pch_pll(struct drm_i915_private *dev_priv,
1077 struct intel_pch_pll *pll,
1078 struct intel_crtc *crtc,
1084 if (HAS_PCH_LPT(dev_priv->dev)) {
1085 DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
1090 "asserting PCH PLL %s with no PLL\n", state_string(state)))
1093 val = I915_READ(pll->pll_reg);
1094 cur_state = !!(val & DPLL_VCO_ENABLE);
1095 WARN(cur_state != state,
1096 "PCH PLL state for reg %x assertion failure (expected %s, current %s), val=%08x\n",
1097 pll->pll_reg, state_string(state), state_string(cur_state), val);
1099 /* Make sure the selected PLL is correctly attached to the transcoder */
1100 if (crtc && HAS_PCH_CPT(dev_priv->dev)) {
1103 pch_dpll = I915_READ(PCH_DPLL_SEL);
1104 cur_state = pll->pll_reg == _PCH_DPLL_B;
1105 if (!WARN(((pch_dpll >> (4 * crtc->pipe)) & 1) != cur_state,
1106 "PLL[%d] not attached to this transcoder %d: %08x\n",
1107 cur_state, crtc->pipe, pch_dpll)) {
1108 cur_state = !!(val >> (4*crtc->pipe + 3));
1109 WARN(cur_state != state,
1110 "PLL[%d] not %s on this transcoder %d: %08x\n",
1111 pll->pll_reg == _PCH_DPLL_B,
1112 state_string(state),
1118 #define assert_pch_pll_enabled(d, p, c) assert_pch_pll(d, p, c, true)
1119 #define assert_pch_pll_disabled(d, p, c) assert_pch_pll(d, p, c, false)
1121 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1122 enum pipe pipe, bool state)
1127 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1130 if (IS_HASWELL(dev_priv->dev)) {
1131 /* On Haswell, DDI is used instead of FDI_TX_CTL */
1132 reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
1133 val = I915_READ(reg);
1134 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1136 reg = FDI_TX_CTL(pipe);
1137 val = I915_READ(reg);
1138 cur_state = !!(val & FDI_TX_ENABLE);
1140 WARN(cur_state != state,
1141 "FDI TX state assertion failure (expected %s, current %s)\n",
1142 state_string(state), state_string(cur_state));
1144 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1145 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1147 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1148 enum pipe pipe, bool state)
1154 if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
1155 DRM_ERROR("Attempting to enable FDI_RX on Haswell pipe > 0\n");
1158 reg = FDI_RX_CTL(pipe);
1159 val = I915_READ(reg);
1160 cur_state = !!(val & FDI_RX_ENABLE);
1162 WARN(cur_state != state,
1163 "FDI RX state assertion failure (expected %s, current %s)\n",
1164 state_string(state), state_string(cur_state));
1166 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1167 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1169 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1175 /* ILK FDI PLL is always enabled */
1176 if (dev_priv->info->gen == 5)
1179 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1180 if (IS_HASWELL(dev_priv->dev))
1183 reg = FDI_TX_CTL(pipe);
1184 val = I915_READ(reg);
1185 WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1188 static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
1194 if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
1195 DRM_ERROR("Attempting to enable FDI on Haswell with pipe > 0\n");
1198 reg = FDI_RX_CTL(pipe);
1199 val = I915_READ(reg);
1200 WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
1203 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1206 int pp_reg, lvds_reg;
1208 enum pipe panel_pipe = PIPE_A;
1211 if (HAS_PCH_SPLIT(dev_priv->dev)) {
1212 pp_reg = PCH_PP_CONTROL;
1213 lvds_reg = PCH_LVDS;
1215 pp_reg = PP_CONTROL;
1219 val = I915_READ(pp_reg);
1220 if (!(val & PANEL_POWER_ON) ||
1221 ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
1224 if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
1225 panel_pipe = PIPE_B;
1227 WARN(panel_pipe == pipe && locked,
1228 "panel assertion failure, pipe %c regs locked\n",
1232 void assert_pipe(struct drm_i915_private *dev_priv,
1233 enum pipe pipe, bool state)
1238 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1241 /* if we need the pipe A quirk it must be always on */
1242 if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
1245 reg = PIPECONF(cpu_transcoder);
1246 val = I915_READ(reg);
1247 cur_state = !!(val & PIPECONF_ENABLE);
1248 WARN(cur_state != state,
1249 "pipe %c assertion failure (expected %s, current %s)\n",
1250 pipe_name(pipe), state_string(state), state_string(cur_state));
1253 static void assert_plane(struct drm_i915_private *dev_priv,
1254 enum plane plane, bool state)
1260 reg = DSPCNTR(plane);
1261 val = I915_READ(reg);
1262 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1263 WARN(cur_state != state,
1264 "plane %c assertion failure (expected %s, current %s)\n",
1265 plane_name(plane), state_string(state), state_string(cur_state));
1268 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1269 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1271 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1278 /* Planes are fixed to pipes on ILK+ */
1279 if (HAS_PCH_SPLIT(dev_priv->dev)) {
1280 reg = DSPCNTR(pipe);
1281 val = I915_READ(reg);
1282 WARN((val & DISPLAY_PLANE_ENABLE),
1283 "plane %c assertion failure, should be disabled but not\n",
1288 /* Need to check both planes against the pipe */
1289 for (i = 0; i < 2; i++) {
1291 val = I915_READ(reg);
1292 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1293 DISPPLANE_SEL_PIPE_SHIFT;
1294 WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1295 "plane %c assertion failure, should be off on pipe %c but is still active\n",
1296 plane_name(i), pipe_name(pipe));
1300 static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1305 if (HAS_PCH_LPT(dev_priv->dev)) {
1306 DRM_DEBUG_DRIVER("LPT does not has PCH refclk, skipping check\n");
1310 val = I915_READ(PCH_DREF_CONTROL);
1311 enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1312 DREF_SUPERSPREAD_SOURCE_MASK));
1313 WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1316 static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
1323 reg = TRANSCONF(pipe);
1324 val = I915_READ(reg);
1325 enabled = !!(val & TRANS_ENABLE);
1327 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1331 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1332 enum pipe pipe, u32 port_sel, u32 val)
1334 if ((val & DP_PORT_EN) == 0)
1337 if (HAS_PCH_CPT(dev_priv->dev)) {
1338 u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1339 u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1340 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1343 if ((val & DP_PIPE_MASK) != (pipe << 30))
1349 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1350 enum pipe pipe, u32 val)
1352 if ((val & PORT_ENABLE) == 0)
1355 if (HAS_PCH_CPT(dev_priv->dev)) {
1356 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1359 if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
1365 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1366 enum pipe pipe, u32 val)
1368 if ((val & LVDS_PORT_EN) == 0)
1371 if (HAS_PCH_CPT(dev_priv->dev)) {
1372 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1375 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1381 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1382 enum pipe pipe, u32 val)
1384 if ((val & ADPA_DAC_ENABLE) == 0)
1386 if (HAS_PCH_CPT(dev_priv->dev)) {
1387 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1390 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1396 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1397 enum pipe pipe, int reg, u32 port_sel)
1399 u32 val = I915_READ(reg);
1400 WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1401 "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1402 reg, pipe_name(pipe));
1404 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
1405 && (val & DP_PIPEB_SELECT),
1406 "IBX PCH dp port still using transcoder B\n");
1409 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1410 enum pipe pipe, int reg)
1412 u32 val = I915_READ(reg);
1413 WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1414 "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1415 reg, pipe_name(pipe));
1417 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & PORT_ENABLE) == 0
1418 && (val & SDVO_PIPE_B_SELECT),
1419 "IBX PCH hdmi port still using transcoder B\n");
1422 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1428 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1429 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1430 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1433 val = I915_READ(reg);
1434 WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1435 "PCH VGA enabled on transcoder %c, should be disabled\n",
1439 val = I915_READ(reg);
1440 WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1441 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1444 assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB);
1445 assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC);
1446 assert_pch_hdmi_disabled(dev_priv, pipe, HDMID);
1450 * intel_enable_pll - enable a PLL
1451 * @dev_priv: i915 private structure
1452 * @pipe: pipe PLL to enable
1454 * Enable @pipe's PLL so we can start pumping pixels from a plane. Check to
1455 * make sure the PLL reg is writable first though, since the panel write
1456 * protect mechanism may be enabled.
1458 * Note! This is for pre-ILK only.
1460 * Unfortunately needed by dvo_ns2501 since the dvo depends on it running.
1462 static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1467 /* No really, not for ILK+ */
1468 BUG_ON(!IS_VALLEYVIEW(dev_priv->dev) && dev_priv->info->gen >= 5);
1470 /* PLL is protected by panel, make sure we can write it */
1471 if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
1472 assert_panel_unlocked(dev_priv, pipe);
1475 val = I915_READ(reg);
1476 val |= DPLL_VCO_ENABLE;
1478 /* We do this three times for luck */
1479 I915_WRITE(reg, val);
1481 udelay(150); /* wait for warmup */
1482 I915_WRITE(reg, val);
1484 udelay(150); /* wait for warmup */
1485 I915_WRITE(reg, val);
1487 udelay(150); /* wait for warmup */
1491 * intel_disable_pll - disable a PLL
1492 * @dev_priv: i915 private structure
1493 * @pipe: pipe PLL to disable
1495 * Disable the PLL for @pipe, making sure the pipe is off first.
1497 * Note! This is for pre-ILK only.
1499 static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1504 /* Don't disable pipe A or pipe A PLLs if needed */
1505 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1508 /* Make sure the pipe isn't still relying on us */
1509 assert_pipe_disabled(dev_priv, pipe);
1512 val = I915_READ(reg);
1513 val &= ~DPLL_VCO_ENABLE;
1514 I915_WRITE(reg, val);
1520 intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value)
1522 unsigned long flags;
1524 spin_lock_irqsave(&dev_priv->dpio_lock, flags);
1525 if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
1527 DRM_ERROR("timeout waiting for SBI to become ready\n");
1531 I915_WRITE(SBI_ADDR,
1533 I915_WRITE(SBI_DATA,
1535 I915_WRITE(SBI_CTL_STAT,
1539 if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
1541 DRM_ERROR("timeout waiting for SBI to complete write transaction\n");
1546 spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
1550 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg)
1552 unsigned long flags;
1555 spin_lock_irqsave(&dev_priv->dpio_lock, flags);
1556 if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
1558 DRM_ERROR("timeout waiting for SBI to become ready\n");
1562 I915_WRITE(SBI_ADDR,
1564 I915_WRITE(SBI_CTL_STAT,
1568 if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
1570 DRM_ERROR("timeout waiting for SBI to complete read transaction\n");
1574 value = I915_READ(SBI_DATA);
1577 spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
1582 * intel_enable_pch_pll - enable PCH PLL
1583 * @dev_priv: i915 private structure
1584 * @pipe: pipe PLL to enable
1586 * The PCH PLL needs to be enabled before the PCH transcoder, since it
1587 * drives the transcoder clock.
1589 static void intel_enable_pch_pll(struct intel_crtc *intel_crtc)
1591 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
1592 struct intel_pch_pll *pll;
1596 /* PCH PLLs only available on ILK, SNB and IVB */
1597 BUG_ON(dev_priv->info->gen < 5);
1598 pll = intel_crtc->pch_pll;
1602 if (WARN_ON(pll->refcount == 0))
1605 DRM_DEBUG_KMS("enable PCH PLL %x (active %d, on? %d)for crtc %d\n",
1606 pll->pll_reg, pll->active, pll->on,
1607 intel_crtc->base.base.id);
1609 /* PCH refclock must be enabled first */
1610 assert_pch_refclk_enabled(dev_priv);
1612 if (pll->active++ && pll->on) {
1613 assert_pch_pll_enabled(dev_priv, pll, NULL);
1617 DRM_DEBUG_KMS("enabling PCH PLL %x\n", pll->pll_reg);
1620 val = I915_READ(reg);
1621 val |= DPLL_VCO_ENABLE;
1622 I915_WRITE(reg, val);
1629 static void intel_disable_pch_pll(struct intel_crtc *intel_crtc)
1631 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
1632 struct intel_pch_pll *pll = intel_crtc->pch_pll;
1636 /* PCH only available on ILK+ */
1637 BUG_ON(dev_priv->info->gen < 5);
1641 if (WARN_ON(pll->refcount == 0))
1644 DRM_DEBUG_KMS("disable PCH PLL %x (active %d, on? %d) for crtc %d\n",
1645 pll->pll_reg, pll->active, pll->on,
1646 intel_crtc->base.base.id);
1648 if (WARN_ON(pll->active == 0)) {
1649 assert_pch_pll_disabled(dev_priv, pll, NULL);
1653 if (--pll->active) {
1654 assert_pch_pll_enabled(dev_priv, pll, NULL);
1658 DRM_DEBUG_KMS("disabling PCH PLL %x\n", pll->pll_reg);
1660 /* Make sure transcoder isn't still depending on us */
1661 assert_transcoder_disabled(dev_priv, intel_crtc->pipe);
1664 val = I915_READ(reg);
1665 val &= ~DPLL_VCO_ENABLE;
1666 I915_WRITE(reg, val);
1673 static void intel_enable_transcoder(struct drm_i915_private *dev_priv,
1677 u32 val, pipeconf_val;
1678 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1680 /* PCH only available on ILK+ */
1681 BUG_ON(dev_priv->info->gen < 5);
1683 /* Make sure PCH DPLL is enabled */
1684 assert_pch_pll_enabled(dev_priv,
1685 to_intel_crtc(crtc)->pch_pll,
1686 to_intel_crtc(crtc));
1688 /* FDI must be feeding us bits for PCH ports */
1689 assert_fdi_tx_enabled(dev_priv, pipe);
1690 assert_fdi_rx_enabled(dev_priv, pipe);
1692 if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
1693 DRM_ERROR("Attempting to enable transcoder on Haswell with pipe > 0\n");
1696 reg = TRANSCONF(pipe);
1697 val = I915_READ(reg);
1698 pipeconf_val = I915_READ(PIPECONF(pipe));
1700 if (HAS_PCH_IBX(dev_priv->dev)) {
1702 * make the BPC in transcoder be consistent with
1703 * that in pipeconf reg.
1705 val &= ~PIPE_BPC_MASK;
1706 val |= pipeconf_val & PIPE_BPC_MASK;
1709 val &= ~TRANS_INTERLACE_MASK;
1710 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1711 if (HAS_PCH_IBX(dev_priv->dev) &&
1712 intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
1713 val |= TRANS_LEGACY_INTERLACED_ILK;
1715 val |= TRANS_INTERLACED;
1717 val |= TRANS_PROGRESSIVE;
1719 I915_WRITE(reg, val | TRANS_ENABLE);
1720 if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1721 DRM_ERROR("failed to enable transcoder %d\n", pipe);
1724 static void intel_disable_transcoder(struct drm_i915_private *dev_priv,
1730 /* FDI relies on the transcoder */
1731 assert_fdi_tx_disabled(dev_priv, pipe);
1732 assert_fdi_rx_disabled(dev_priv, pipe);
1734 /* Ports must be off as well */
1735 assert_pch_ports_disabled(dev_priv, pipe);
1737 reg = TRANSCONF(pipe);
1738 val = I915_READ(reg);
1739 val &= ~TRANS_ENABLE;
1740 I915_WRITE(reg, val);
1741 /* wait for PCH transcoder off, transcoder state */
1742 if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1743 DRM_ERROR("failed to disable transcoder %d\n", pipe);
1747 * intel_enable_pipe - enable a pipe, asserting requirements
1748 * @dev_priv: i915 private structure
1749 * @pipe: pipe to enable
1750 * @pch_port: on ILK+, is this pipe driving a PCH port or not
1752 * Enable @pipe, making sure that various hardware specific requirements
1753 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1755 * @pipe should be %PIPE_A or %PIPE_B.
1757 * Will wait until the pipe is actually running (i.e. first vblank) before
1760 static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
1763 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1769 * A pipe without a PLL won't actually be able to drive bits from
1770 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
1773 if (!HAS_PCH_SPLIT(dev_priv->dev))
1774 assert_pll_enabled(dev_priv, pipe);
1777 /* if driving the PCH, we need FDI enabled */
1778 assert_fdi_rx_pll_enabled(dev_priv, pipe);
1779 assert_fdi_tx_pll_enabled(dev_priv, pipe);
1781 /* FIXME: assert CPU port conditions for SNB+ */
1784 reg = PIPECONF(cpu_transcoder);
1785 val = I915_READ(reg);
1786 if (val & PIPECONF_ENABLE)
1789 I915_WRITE(reg, val | PIPECONF_ENABLE);
1790 intel_wait_for_vblank(dev_priv->dev, pipe);
1794 * intel_disable_pipe - disable a pipe, asserting requirements
1795 * @dev_priv: i915 private structure
1796 * @pipe: pipe to disable
1798 * Disable @pipe, making sure that various hardware specific requirements
1799 * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
1801 * @pipe should be %PIPE_A or %PIPE_B.
1803 * Will wait until the pipe has shut down before returning.
1805 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
1808 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1814 * Make sure planes won't keep trying to pump pixels to us,
1815 * or we might hang the display.
1817 assert_planes_disabled(dev_priv, pipe);
1819 /* Don't disable pipe A or pipe A PLLs if needed */
1820 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1823 reg = PIPECONF(cpu_transcoder);
1824 val = I915_READ(reg);
1825 if ((val & PIPECONF_ENABLE) == 0)
1828 I915_WRITE(reg, val & ~PIPECONF_ENABLE);
1829 intel_wait_for_pipe_off(dev_priv->dev, pipe);
1833 * Plane regs are double buffered, going from enabled->disabled needs a
1834 * trigger in order to latch. The display address reg provides this.
1836 void intel_flush_display_plane(struct drm_i915_private *dev_priv,
1839 I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
1840 I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
1844 * intel_enable_plane - enable a display plane on a given pipe
1845 * @dev_priv: i915 private structure
1846 * @plane: plane to enable
1847 * @pipe: pipe being fed
1849 * Enable @plane on @pipe, making sure that @pipe is running first.
1851 static void intel_enable_plane(struct drm_i915_private *dev_priv,
1852 enum plane plane, enum pipe pipe)
1857 /* If the pipe isn't enabled, we can't pump pixels and may hang */
1858 assert_pipe_enabled(dev_priv, pipe);
1860 reg = DSPCNTR(plane);
1861 val = I915_READ(reg);
1862 if (val & DISPLAY_PLANE_ENABLE)
1865 I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
1866 intel_flush_display_plane(dev_priv, plane);
1867 intel_wait_for_vblank(dev_priv->dev, pipe);
1871 * intel_disable_plane - disable a display plane
1872 * @dev_priv: i915 private structure
1873 * @plane: plane to disable
1874 * @pipe: pipe consuming the data
1876 * Disable @plane; should be an independent operation.
1878 static void intel_disable_plane(struct drm_i915_private *dev_priv,
1879 enum plane plane, enum pipe pipe)
1884 reg = DSPCNTR(plane);
1885 val = I915_READ(reg);
1886 if ((val & DISPLAY_PLANE_ENABLE) == 0)
1889 I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
1890 intel_flush_display_plane(dev_priv, plane);
1891 intel_wait_for_vblank(dev_priv->dev, pipe);
1895 intel_pin_and_fence_fb_obj(struct drm_device *dev,
1896 struct drm_i915_gem_object *obj,
1897 struct intel_ring_buffer *pipelined)
1899 struct drm_i915_private *dev_priv = dev->dev_private;
1903 switch (obj->tiling_mode) {
1904 case I915_TILING_NONE:
1905 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1906 alignment = 128 * 1024;
1907 else if (INTEL_INFO(dev)->gen >= 4)
1908 alignment = 4 * 1024;
1910 alignment = 64 * 1024;
1913 /* pin() will align the object as required by fence */
1917 /* FIXME: Is this true? */
1918 DRM_ERROR("Y tiled not allowed for scan out buffers\n");
1924 dev_priv->mm.interruptible = false;
1925 ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
1927 goto err_interruptible;
1929 /* Install a fence for tiled scan-out. Pre-i965 always needs a
1930 * fence, whereas 965+ only requires a fence if using
1931 * framebuffer compression. For simplicity, we always install
1932 * a fence as the cost is not that onerous.
1934 ret = i915_gem_object_get_fence(obj);
1938 i915_gem_object_pin_fence(obj);
1940 dev_priv->mm.interruptible = true;
1944 i915_gem_object_unpin(obj);
1946 dev_priv->mm.interruptible = true;
1950 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
1952 i915_gem_object_unpin_fence(obj);
1953 i915_gem_object_unpin(obj);
1956 /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
1957 * is assumed to be a power-of-two. */
1958 static unsigned long gen4_compute_dspaddr_offset_xtiled(int *x, int *y,
1962 int tile_rows, tiles;
1966 tiles = *x / (512/bpp);
1969 return tile_rows * pitch * 8 + tiles * 4096;
1972 static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
1975 struct drm_device *dev = crtc->dev;
1976 struct drm_i915_private *dev_priv = dev->dev_private;
1977 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1978 struct intel_framebuffer *intel_fb;
1979 struct drm_i915_gem_object *obj;
1980 int plane = intel_crtc->plane;
1981 unsigned long linear_offset;
1990 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
1994 intel_fb = to_intel_framebuffer(fb);
1995 obj = intel_fb->obj;
1997 reg = DSPCNTR(plane);
1998 dspcntr = I915_READ(reg);
1999 /* Mask out pixel format bits in case we change it */
2000 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2001 switch (fb->bits_per_pixel) {
2003 dspcntr |= DISPPLANE_8BPP;
2006 if (fb->depth == 15)
2007 dspcntr |= DISPPLANE_15_16BPP;
2009 dspcntr |= DISPPLANE_16BPP;
2013 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
2016 DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
2019 if (INTEL_INFO(dev)->gen >= 4) {
2020 if (obj->tiling_mode != I915_TILING_NONE)
2021 dspcntr |= DISPPLANE_TILED;
2023 dspcntr &= ~DISPPLANE_TILED;
2026 I915_WRITE(reg, dspcntr);
2028 linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2030 if (INTEL_INFO(dev)->gen >= 4) {
2031 intel_crtc->dspaddr_offset =
2032 gen4_compute_dspaddr_offset_xtiled(&x, &y,
2033 fb->bits_per_pixel / 8,
2035 linear_offset -= intel_crtc->dspaddr_offset;
2037 intel_crtc->dspaddr_offset = linear_offset;
2040 DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
2041 obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
2042 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2043 if (INTEL_INFO(dev)->gen >= 4) {
2044 I915_MODIFY_DISPBASE(DSPSURF(plane),
2045 obj->gtt_offset + intel_crtc->dspaddr_offset);
2046 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2047 I915_WRITE(DSPLINOFF(plane), linear_offset);
2049 I915_WRITE(DSPADDR(plane), obj->gtt_offset + linear_offset);
2055 static int ironlake_update_plane(struct drm_crtc *crtc,
2056 struct drm_framebuffer *fb, int x, int y)
2058 struct drm_device *dev = crtc->dev;
2059 struct drm_i915_private *dev_priv = dev->dev_private;
2060 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2061 struct intel_framebuffer *intel_fb;
2062 struct drm_i915_gem_object *obj;
2063 int plane = intel_crtc->plane;
2064 unsigned long linear_offset;
2074 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
2078 intel_fb = to_intel_framebuffer(fb);
2079 obj = intel_fb->obj;
2081 reg = DSPCNTR(plane);
2082 dspcntr = I915_READ(reg);
2083 /* Mask out pixel format bits in case we change it */
2084 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2085 switch (fb->bits_per_pixel) {
2087 dspcntr |= DISPPLANE_8BPP;
2090 if (fb->depth != 16)
2093 dspcntr |= DISPPLANE_16BPP;
2097 if (fb->depth == 24)
2098 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
2099 else if (fb->depth == 30)
2100 dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
2105 DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
2109 if (obj->tiling_mode != I915_TILING_NONE)
2110 dspcntr |= DISPPLANE_TILED;
2112 dspcntr &= ~DISPPLANE_TILED;
2115 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2117 I915_WRITE(reg, dspcntr);
2119 linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2120 intel_crtc->dspaddr_offset =
2121 gen4_compute_dspaddr_offset_xtiled(&x, &y,
2122 fb->bits_per_pixel / 8,
2124 linear_offset -= intel_crtc->dspaddr_offset;
2126 DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
2127 obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
2128 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2129 I915_MODIFY_DISPBASE(DSPSURF(plane),
2130 obj->gtt_offset + intel_crtc->dspaddr_offset);
2131 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2132 I915_WRITE(DSPLINOFF(plane), linear_offset);
2138 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2140 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2141 int x, int y, enum mode_set_atomic state)
2143 struct drm_device *dev = crtc->dev;
2144 struct drm_i915_private *dev_priv = dev->dev_private;
2146 if (dev_priv->display.disable_fbc)
2147 dev_priv->display.disable_fbc(dev);
2148 intel_increase_pllclock(crtc);
2150 return dev_priv->display.update_plane(crtc, fb, x, y);
2154 intel_finish_fb(struct drm_framebuffer *old_fb)
2156 struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
2157 struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
2158 bool was_interruptible = dev_priv->mm.interruptible;
2161 wait_event(dev_priv->pending_flip_queue,
2162 atomic_read(&dev_priv->mm.wedged) ||
2163 atomic_read(&obj->pending_flip) == 0);
2165 /* Big Hammer, we also need to ensure that any pending
2166 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2167 * current scanout is retired before unpinning the old
2170 * This should only fail upon a hung GPU, in which case we
2171 * can safely continue.
2173 dev_priv->mm.interruptible = false;
2174 ret = i915_gem_object_finish_gpu(obj);
2175 dev_priv->mm.interruptible = was_interruptible;
2181 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2182 struct drm_framebuffer *fb)
2184 struct drm_device *dev = crtc->dev;
2185 struct drm_i915_private *dev_priv = dev->dev_private;
2186 struct drm_i915_master_private *master_priv;
2187 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2188 struct drm_framebuffer *old_fb;
2193 DRM_ERROR("No FB bound\n");
2197 if(intel_crtc->plane > dev_priv->num_pipe) {
2198 DRM_ERROR("no plane for crtc: plane %d, num_pipes %d\n",
2200 dev_priv->num_pipe);
2204 mutex_lock(&dev->struct_mutex);
2205 ret = intel_pin_and_fence_fb_obj(dev,
2206 to_intel_framebuffer(fb)->obj,
2209 mutex_unlock(&dev->struct_mutex);
2210 DRM_ERROR("pin & fence failed\n");
2215 intel_finish_fb(crtc->fb);
2217 ret = dev_priv->display.update_plane(crtc, fb, x, y);
2219 intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
2220 mutex_unlock(&dev->struct_mutex);
2221 DRM_ERROR("failed to update base address\n");
2231 intel_wait_for_vblank(dev, intel_crtc->pipe);
2232 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
2235 intel_update_fbc(dev);
2236 mutex_unlock(&dev->struct_mutex);
2238 if (!dev->primary->master)
2241 master_priv = dev->primary->master->driver_priv;
2242 if (!master_priv->sarea_priv)
2245 if (intel_crtc->pipe) {
2246 master_priv->sarea_priv->pipeB_x = x;
2247 master_priv->sarea_priv->pipeB_y = y;
2249 master_priv->sarea_priv->pipeA_x = x;
2250 master_priv->sarea_priv->pipeA_y = y;
2256 static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
2258 struct drm_device *dev = crtc->dev;
2259 struct drm_i915_private *dev_priv = dev->dev_private;
2262 DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
2263 dpa_ctl = I915_READ(DP_A);
2264 dpa_ctl &= ~DP_PLL_FREQ_MASK;
2266 if (clock < 200000) {
2268 dpa_ctl |= DP_PLL_FREQ_160MHZ;
2269 /* workaround for 160Mhz:
2270 1) program 0x4600c bits 15:0 = 0x8124
2271 2) program 0x46010 bit 0 = 1
2272 3) program 0x46034 bit 24 = 1
2273 4) program 0x64000 bit 14 = 1
2275 temp = I915_READ(0x4600c);
2277 I915_WRITE(0x4600c, temp | 0x8124);
2279 temp = I915_READ(0x46010);
2280 I915_WRITE(0x46010, temp | 1);
2282 temp = I915_READ(0x46034);
2283 I915_WRITE(0x46034, temp | (1 << 24));
2285 dpa_ctl |= DP_PLL_FREQ_270MHZ;
2287 I915_WRITE(DP_A, dpa_ctl);
2293 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2295 struct drm_device *dev = crtc->dev;
2296 struct drm_i915_private *dev_priv = dev->dev_private;
2297 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2298 int pipe = intel_crtc->pipe;
2301 /* enable normal train */
2302 reg = FDI_TX_CTL(pipe);
2303 temp = I915_READ(reg);
2304 if (IS_IVYBRIDGE(dev)) {
2305 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2306 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2308 temp &= ~FDI_LINK_TRAIN_NONE;
2309 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2311 I915_WRITE(reg, temp);
2313 reg = FDI_RX_CTL(pipe);
2314 temp = I915_READ(reg);
2315 if (HAS_PCH_CPT(dev)) {
2316 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2317 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2319 temp &= ~FDI_LINK_TRAIN_NONE;
2320 temp |= FDI_LINK_TRAIN_NONE;
2322 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2324 /* wait one idle pattern time */
2328 /* IVB wants error correction enabled */
2329 if (IS_IVYBRIDGE(dev))
2330 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2331 FDI_FE_ERRC_ENABLE);
2334 static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
2336 struct drm_i915_private *dev_priv = dev->dev_private;
2337 u32 flags = I915_READ(SOUTH_CHICKEN1);
2339 flags |= FDI_PHASE_SYNC_OVR(pipe);
2340 I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */
2341 flags |= FDI_PHASE_SYNC_EN(pipe);
2342 I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */
2343 POSTING_READ(SOUTH_CHICKEN1);
2346 /* The FDI link training functions for ILK/Ibexpeak. */
2347 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
2349 struct drm_device *dev = crtc->dev;
2350 struct drm_i915_private *dev_priv = dev->dev_private;
2351 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2352 int pipe = intel_crtc->pipe;
2353 int plane = intel_crtc->plane;
2354 u32 reg, temp, tries;
2356 /* FDI needs bits from pipe & plane first */
2357 assert_pipe_enabled(dev_priv, pipe);
2358 assert_plane_enabled(dev_priv, plane);
2360 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2362 reg = FDI_RX_IMR(pipe);
2363 temp = I915_READ(reg);
2364 temp &= ~FDI_RX_SYMBOL_LOCK;
2365 temp &= ~FDI_RX_BIT_LOCK;
2366 I915_WRITE(reg, temp);
2370 /* enable CPU FDI TX and PCH FDI RX */
2371 reg = FDI_TX_CTL(pipe);
2372 temp = I915_READ(reg);
2374 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2375 temp &= ~FDI_LINK_TRAIN_NONE;
2376 temp |= FDI_LINK_TRAIN_PATTERN_1;
2377 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2379 reg = FDI_RX_CTL(pipe);
2380 temp = I915_READ(reg);
2381 temp &= ~FDI_LINK_TRAIN_NONE;
2382 temp |= FDI_LINK_TRAIN_PATTERN_1;
2383 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2388 /* Ironlake workaround, enable clock pointer after FDI enable*/
2389 if (HAS_PCH_IBX(dev)) {
2390 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2391 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
2392 FDI_RX_PHASE_SYNC_POINTER_EN);
2395 reg = FDI_RX_IIR(pipe);
2396 for (tries = 0; tries < 5; tries++) {
2397 temp = I915_READ(reg);
2398 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2400 if ((temp & FDI_RX_BIT_LOCK)) {
2401 DRM_DEBUG_KMS("FDI train 1 done.\n");
2402 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2407 DRM_ERROR("FDI train 1 fail!\n");
2410 reg = FDI_TX_CTL(pipe);
2411 temp = I915_READ(reg);
2412 temp &= ~FDI_LINK_TRAIN_NONE;
2413 temp |= FDI_LINK_TRAIN_PATTERN_2;
2414 I915_WRITE(reg, temp);
2416 reg = FDI_RX_CTL(pipe);
2417 temp = I915_READ(reg);
2418 temp &= ~FDI_LINK_TRAIN_NONE;
2419 temp |= FDI_LINK_TRAIN_PATTERN_2;
2420 I915_WRITE(reg, temp);
2425 reg = FDI_RX_IIR(pipe);
2426 for (tries = 0; tries < 5; tries++) {
2427 temp = I915_READ(reg);
2428 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2430 if (temp & FDI_RX_SYMBOL_LOCK) {
2431 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2432 DRM_DEBUG_KMS("FDI train 2 done.\n");
2437 DRM_ERROR("FDI train 2 fail!\n");
2439 DRM_DEBUG_KMS("FDI train done\n");
2443 static const int snb_b_fdi_train_param[] = {
2444 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
2445 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
2446 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
2447 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
2450 /* The FDI link training functions for SNB/Cougarpoint. */
2451 static void gen6_fdi_link_train(struct drm_crtc *crtc)
2453 struct drm_device *dev = crtc->dev;
2454 struct drm_i915_private *dev_priv = dev->dev_private;
2455 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2456 int pipe = intel_crtc->pipe;
2457 u32 reg, temp, i, retry;
2459 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2461 reg = FDI_RX_IMR(pipe);
2462 temp = I915_READ(reg);
2463 temp &= ~FDI_RX_SYMBOL_LOCK;
2464 temp &= ~FDI_RX_BIT_LOCK;
2465 I915_WRITE(reg, temp);
2470 /* enable CPU FDI TX and PCH FDI RX */
2471 reg = FDI_TX_CTL(pipe);
2472 temp = I915_READ(reg);
2474 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2475 temp &= ~FDI_LINK_TRAIN_NONE;
2476 temp |= FDI_LINK_TRAIN_PATTERN_1;
2477 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2479 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2480 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2482 I915_WRITE(FDI_RX_MISC(pipe),
2483 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2485 reg = FDI_RX_CTL(pipe);
2486 temp = I915_READ(reg);
2487 if (HAS_PCH_CPT(dev)) {
2488 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2489 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2491 temp &= ~FDI_LINK_TRAIN_NONE;
2492 temp |= FDI_LINK_TRAIN_PATTERN_1;
2494 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2499 if (HAS_PCH_CPT(dev))
2500 cpt_phase_pointer_enable(dev, pipe);
2502 for (i = 0; i < 4; i++) {
2503 reg = FDI_TX_CTL(pipe);
2504 temp = I915_READ(reg);
2505 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2506 temp |= snb_b_fdi_train_param[i];
2507 I915_WRITE(reg, temp);
2512 for (retry = 0; retry < 5; retry++) {
2513 reg = FDI_RX_IIR(pipe);
2514 temp = I915_READ(reg);
2515 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2516 if (temp & FDI_RX_BIT_LOCK) {
2517 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2518 DRM_DEBUG_KMS("FDI train 1 done.\n");
2527 DRM_ERROR("FDI train 1 fail!\n");
2530 reg = FDI_TX_CTL(pipe);
2531 temp = I915_READ(reg);
2532 temp &= ~FDI_LINK_TRAIN_NONE;
2533 temp |= FDI_LINK_TRAIN_PATTERN_2;
2535 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2537 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2539 I915_WRITE(reg, temp);
2541 reg = FDI_RX_CTL(pipe);
2542 temp = I915_READ(reg);
2543 if (HAS_PCH_CPT(dev)) {
2544 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2545 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2547 temp &= ~FDI_LINK_TRAIN_NONE;
2548 temp |= FDI_LINK_TRAIN_PATTERN_2;
2550 I915_WRITE(reg, temp);
2555 for (i = 0; i < 4; i++) {
2556 reg = FDI_TX_CTL(pipe);
2557 temp = I915_READ(reg);
2558 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2559 temp |= snb_b_fdi_train_param[i];
2560 I915_WRITE(reg, temp);
2565 for (retry = 0; retry < 5; retry++) {
2566 reg = FDI_RX_IIR(pipe);
2567 temp = I915_READ(reg);
2568 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2569 if (temp & FDI_RX_SYMBOL_LOCK) {
2570 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2571 DRM_DEBUG_KMS("FDI train 2 done.\n");
2580 DRM_ERROR("FDI train 2 fail!\n");
2582 DRM_DEBUG_KMS("FDI train done.\n");
2585 /* Manual link training for Ivy Bridge A0 parts */
2586 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
2588 struct drm_device *dev = crtc->dev;
2589 struct drm_i915_private *dev_priv = dev->dev_private;
2590 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2591 int pipe = intel_crtc->pipe;
2594 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2596 reg = FDI_RX_IMR(pipe);
2597 temp = I915_READ(reg);
2598 temp &= ~FDI_RX_SYMBOL_LOCK;
2599 temp &= ~FDI_RX_BIT_LOCK;
2600 I915_WRITE(reg, temp);
2605 /* enable CPU FDI TX and PCH FDI RX */
2606 reg = FDI_TX_CTL(pipe);
2607 temp = I915_READ(reg);
2609 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2610 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
2611 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
2612 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2613 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2614 temp |= FDI_COMPOSITE_SYNC;
2615 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2617 I915_WRITE(FDI_RX_MISC(pipe),
2618 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2620 reg = FDI_RX_CTL(pipe);
2621 temp = I915_READ(reg);
2622 temp &= ~FDI_LINK_TRAIN_AUTO;
2623 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2624 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2625 temp |= FDI_COMPOSITE_SYNC;
2626 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2631 if (HAS_PCH_CPT(dev))
2632 cpt_phase_pointer_enable(dev, pipe);
2634 for (i = 0; i < 4; i++) {
2635 reg = FDI_TX_CTL(pipe);
2636 temp = I915_READ(reg);
2637 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2638 temp |= snb_b_fdi_train_param[i];
2639 I915_WRITE(reg, temp);
2644 reg = FDI_RX_IIR(pipe);
2645 temp = I915_READ(reg);
2646 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2648 if (temp & FDI_RX_BIT_LOCK ||
2649 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
2650 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2651 DRM_DEBUG_KMS("FDI train 1 done.\n");
2656 DRM_ERROR("FDI train 1 fail!\n");
2659 reg = FDI_TX_CTL(pipe);
2660 temp = I915_READ(reg);
2661 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2662 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
2663 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2664 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2665 I915_WRITE(reg, temp);
2667 reg = FDI_RX_CTL(pipe);
2668 temp = I915_READ(reg);
2669 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2670 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2671 I915_WRITE(reg, temp);
2676 for (i = 0; i < 4; i++) {
2677 reg = FDI_TX_CTL(pipe);
2678 temp = I915_READ(reg);
2679 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2680 temp |= snb_b_fdi_train_param[i];
2681 I915_WRITE(reg, temp);
2686 reg = FDI_RX_IIR(pipe);
2687 temp = I915_READ(reg);
2688 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2690 if (temp & FDI_RX_SYMBOL_LOCK) {
2691 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2692 DRM_DEBUG_KMS("FDI train 2 done.\n");
2697 DRM_ERROR("FDI train 2 fail!\n");
2699 DRM_DEBUG_KMS("FDI train done.\n");
2702 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
2704 struct drm_device *dev = intel_crtc->base.dev;
2705 struct drm_i915_private *dev_priv = dev->dev_private;
2706 int pipe = intel_crtc->pipe;
2710 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
2711 reg = FDI_RX_CTL(pipe);
2712 temp = I915_READ(reg);
2713 temp &= ~((0x7 << 19) | (0x7 << 16));
2714 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2715 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2716 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
2721 /* Switch from Rawclk to PCDclk */
2722 temp = I915_READ(reg);
2723 I915_WRITE(reg, temp | FDI_PCDCLK);
2728 /* On Haswell, the PLL configuration for ports and pipes is handled
2729 * separately, as part of DDI setup */
2730 if (!IS_HASWELL(dev)) {
2731 /* Enable CPU FDI TX PLL, always on for Ironlake */
2732 reg = FDI_TX_CTL(pipe);
2733 temp = I915_READ(reg);
2734 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
2735 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
2743 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
2745 struct drm_device *dev = intel_crtc->base.dev;
2746 struct drm_i915_private *dev_priv = dev->dev_private;
2747 int pipe = intel_crtc->pipe;
2750 /* Switch from PCDclk to Rawclk */
2751 reg = FDI_RX_CTL(pipe);
2752 temp = I915_READ(reg);
2753 I915_WRITE(reg, temp & ~FDI_PCDCLK);
2755 /* Disable CPU FDI TX PLL */
2756 reg = FDI_TX_CTL(pipe);
2757 temp = I915_READ(reg);
2758 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
2763 reg = FDI_RX_CTL(pipe);
2764 temp = I915_READ(reg);
2765 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
2767 /* Wait for the clocks to turn off. */
2772 static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe)
2774 struct drm_i915_private *dev_priv = dev->dev_private;
2775 u32 flags = I915_READ(SOUTH_CHICKEN1);
2777 flags &= ~(FDI_PHASE_SYNC_EN(pipe));
2778 I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */
2779 flags &= ~(FDI_PHASE_SYNC_OVR(pipe));
2780 I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */
2781 POSTING_READ(SOUTH_CHICKEN1);
2783 static void ironlake_fdi_disable(struct drm_crtc *crtc)
2785 struct drm_device *dev = crtc->dev;
2786 struct drm_i915_private *dev_priv = dev->dev_private;
2787 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2788 int pipe = intel_crtc->pipe;
2791 /* disable CPU FDI tx and PCH FDI rx */
2792 reg = FDI_TX_CTL(pipe);
2793 temp = I915_READ(reg);
2794 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
2797 reg = FDI_RX_CTL(pipe);
2798 temp = I915_READ(reg);
2799 temp &= ~(0x7 << 16);
2800 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2801 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
2806 /* Ironlake workaround, disable clock pointer after downing FDI */
2807 if (HAS_PCH_IBX(dev)) {
2808 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2809 I915_WRITE(FDI_RX_CHICKEN(pipe),
2810 I915_READ(FDI_RX_CHICKEN(pipe) &
2811 ~FDI_RX_PHASE_SYNC_POINTER_EN));
2812 } else if (HAS_PCH_CPT(dev)) {
2813 cpt_phase_pointer_disable(dev, pipe);
2816 /* still set train pattern 1 */
2817 reg = FDI_TX_CTL(pipe);
2818 temp = I915_READ(reg);
2819 temp &= ~FDI_LINK_TRAIN_NONE;
2820 temp |= FDI_LINK_TRAIN_PATTERN_1;
2821 I915_WRITE(reg, temp);
2823 reg = FDI_RX_CTL(pipe);
2824 temp = I915_READ(reg);
2825 if (HAS_PCH_CPT(dev)) {
2826 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2827 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2829 temp &= ~FDI_LINK_TRAIN_NONE;
2830 temp |= FDI_LINK_TRAIN_PATTERN_1;
2832 /* BPC in FDI rx is consistent with that in PIPECONF */
2833 temp &= ~(0x07 << 16);
2834 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2835 I915_WRITE(reg, temp);
2841 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
2843 struct drm_device *dev = crtc->dev;
2844 struct drm_i915_private *dev_priv = dev->dev_private;
2845 unsigned long flags;
2848 if (atomic_read(&dev_priv->mm.wedged))
2851 spin_lock_irqsave(&dev->event_lock, flags);
2852 pending = to_intel_crtc(crtc)->unpin_work != NULL;
2853 spin_unlock_irqrestore(&dev->event_lock, flags);
2858 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
2860 struct drm_device *dev = crtc->dev;
2861 struct drm_i915_private *dev_priv = dev->dev_private;
2863 if (crtc->fb == NULL)
2866 wait_event(dev_priv->pending_flip_queue,
2867 !intel_crtc_has_pending_flip(crtc));
2869 mutex_lock(&dev->struct_mutex);
2870 intel_finish_fb(crtc->fb);
2871 mutex_unlock(&dev->struct_mutex);
2874 static bool ironlake_crtc_driving_pch(struct drm_crtc *crtc)
2876 struct drm_device *dev = crtc->dev;
2877 struct intel_encoder *intel_encoder;
2880 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
2881 * must be driven by its own crtc; no sharing is possible.
2883 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
2884 switch (intel_encoder->type) {
2885 case INTEL_OUTPUT_EDP:
2886 if (!intel_encoder_is_pch_edp(&intel_encoder->base))
2895 static bool haswell_crtc_driving_pch(struct drm_crtc *crtc)
2897 return intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG);
2900 /* Program iCLKIP clock to the desired frequency */
2901 static void lpt_program_iclkip(struct drm_crtc *crtc)
2903 struct drm_device *dev = crtc->dev;
2904 struct drm_i915_private *dev_priv = dev->dev_private;
2905 u32 divsel, phaseinc, auxdiv, phasedir = 0;
2908 /* It is necessary to ungate the pixclk gate prior to programming
2909 * the divisors, and gate it back when it is done.
2911 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
2913 /* Disable SSCCTL */
2914 intel_sbi_write(dev_priv, SBI_SSCCTL6,
2915 intel_sbi_read(dev_priv, SBI_SSCCTL6) |
2916 SBI_SSCCTL_DISABLE);
2918 /* 20MHz is a corner case which is out of range for the 7-bit divisor */
2919 if (crtc->mode.clock == 20000) {
2924 /* The iCLK virtual clock root frequency is in MHz,
2925 * but the crtc->mode.clock in in KHz. To get the divisors,
2926 * it is necessary to divide one by another, so we
2927 * convert the virtual clock precision to KHz here for higher
2930 u32 iclk_virtual_root_freq = 172800 * 1000;
2931 u32 iclk_pi_range = 64;
2932 u32 desired_divisor, msb_divisor_value, pi_value;
2934 desired_divisor = (iclk_virtual_root_freq / crtc->mode.clock);
2935 msb_divisor_value = desired_divisor / iclk_pi_range;
2936 pi_value = desired_divisor % iclk_pi_range;
2939 divsel = msb_divisor_value - 2;
2940 phaseinc = pi_value;
2943 /* This should not happen with any sane values */
2944 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
2945 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
2946 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
2947 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
2949 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
2956 /* Program SSCDIVINTPHASE6 */
2957 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6);
2958 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
2959 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
2960 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
2961 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
2962 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
2963 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
2965 intel_sbi_write(dev_priv,
2966 SBI_SSCDIVINTPHASE6,
2969 /* Program SSCAUXDIV */
2970 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6);
2971 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
2972 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
2973 intel_sbi_write(dev_priv,
2978 /* Enable modulator and associated divider */
2979 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6);
2980 temp &= ~SBI_SSCCTL_DISABLE;
2981 intel_sbi_write(dev_priv,
2985 /* Wait for initialization time */
2988 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
2992 * Enable PCH resources required for PCH ports:
2994 * - FDI training & RX/TX
2995 * - update transcoder timings
2996 * - DP transcoding bits
2999 static void ironlake_pch_enable(struct drm_crtc *crtc)
3001 struct drm_device *dev = crtc->dev;
3002 struct drm_i915_private *dev_priv = dev->dev_private;
3003 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3004 int pipe = intel_crtc->pipe;
3007 assert_transcoder_disabled(dev_priv, pipe);
3009 /* Write the TU size bits before fdi link training, so that error
3010 * detection works. */
3011 I915_WRITE(FDI_RX_TUSIZE1(pipe),
3012 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
3014 /* For PCH output, training FDI link */
3015 dev_priv->display.fdi_link_train(crtc);
3017 /* XXX: pch pll's can be enabled any time before we enable the PCH
3018 * transcoder, and we actually should do this to not upset any PCH
3019 * transcoder that already use the clock when we share it.
3021 * Note that enable_pch_pll tries to do the right thing, but get_pch_pll
3022 * unconditionally resets the pll - we need that to have the right LVDS
3023 * enable sequence. */
3024 intel_enable_pch_pll(intel_crtc);
3026 if (HAS_PCH_LPT(dev)) {
3027 DRM_DEBUG_KMS("LPT detected: programming iCLKIP\n");
3028 lpt_program_iclkip(crtc);
3029 } else if (HAS_PCH_CPT(dev)) {
3032 temp = I915_READ(PCH_DPLL_SEL);
3036 temp |= TRANSA_DPLL_ENABLE;
3037 sel = TRANSA_DPLLB_SEL;
3040 temp |= TRANSB_DPLL_ENABLE;
3041 sel = TRANSB_DPLLB_SEL;
3044 temp |= TRANSC_DPLL_ENABLE;
3045 sel = TRANSC_DPLLB_SEL;
3048 if (intel_crtc->pch_pll->pll_reg == _PCH_DPLL_B)
3052 I915_WRITE(PCH_DPLL_SEL, temp);
3055 /* set transcoder timing, panel must allow it */
3056 assert_panel_unlocked(dev_priv, pipe);
3057 I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
3058 I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
3059 I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe)));
3061 I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
3062 I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
3063 I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
3064 I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe)));
3066 if (!IS_HASWELL(dev))
3067 intel_fdi_normal_train(crtc);
3069 /* For PCH DP, enable TRANS_DP_CTL */
3070 if (HAS_PCH_CPT(dev) &&
3071 (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
3072 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
3073 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
3074 reg = TRANS_DP_CTL(pipe);
3075 temp = I915_READ(reg);
3076 temp &= ~(TRANS_DP_PORT_SEL_MASK |
3077 TRANS_DP_SYNC_MASK |
3079 temp |= (TRANS_DP_OUTPUT_ENABLE |
3080 TRANS_DP_ENH_FRAMING);
3081 temp |= bpc << 9; /* same format but at 11:9 */
3083 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
3084 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
3085 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
3086 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
3088 switch (intel_trans_dp_port_sel(crtc)) {
3090 temp |= TRANS_DP_PORT_SEL_B;
3093 temp |= TRANS_DP_PORT_SEL_C;
3096 temp |= TRANS_DP_PORT_SEL_D;
3099 DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
3100 temp |= TRANS_DP_PORT_SEL_B;
3104 I915_WRITE(reg, temp);
3107 intel_enable_transcoder(dev_priv, pipe);
3110 static void intel_put_pch_pll(struct intel_crtc *intel_crtc)
3112 struct intel_pch_pll *pll = intel_crtc->pch_pll;
3117 if (pll->refcount == 0) {
3118 WARN(1, "bad PCH PLL refcount\n");
3123 intel_crtc->pch_pll = NULL;
3126 static struct intel_pch_pll *intel_get_pch_pll(struct intel_crtc *intel_crtc, u32 dpll, u32 fp)
3128 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
3129 struct intel_pch_pll *pll;
3132 pll = intel_crtc->pch_pll;
3134 DRM_DEBUG_KMS("CRTC:%d reusing existing PCH PLL %x\n",
3135 intel_crtc->base.base.id, pll->pll_reg);
3139 if (HAS_PCH_IBX(dev_priv->dev)) {
3140 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
3141 i = intel_crtc->pipe;
3142 pll = &dev_priv->pch_plls[i];
3144 DRM_DEBUG_KMS("CRTC:%d using pre-allocated PCH PLL %x\n",
3145 intel_crtc->base.base.id, pll->pll_reg);
3150 for (i = 0; i < dev_priv->num_pch_pll; i++) {
3151 pll = &dev_priv->pch_plls[i];
3153 /* Only want to check enabled timings first */
3154 if (pll->refcount == 0)
3157 if (dpll == (I915_READ(pll->pll_reg) & 0x7fffffff) &&
3158 fp == I915_READ(pll->fp0_reg)) {
3159 DRM_DEBUG_KMS("CRTC:%d sharing existing PCH PLL %x (refcount %d, ative %d)\n",
3160 intel_crtc->base.base.id,
3161 pll->pll_reg, pll->refcount, pll->active);
3167 /* Ok no matching timings, maybe there's a free one? */
3168 for (i = 0; i < dev_priv->num_pch_pll; i++) {
3169 pll = &dev_priv->pch_plls[i];
3170 if (pll->refcount == 0) {
3171 DRM_DEBUG_KMS("CRTC:%d allocated PCH PLL %x\n",
3172 intel_crtc->base.base.id, pll->pll_reg);
3180 intel_crtc->pch_pll = pll;
3182 DRM_DEBUG_DRIVER("using pll %d for pipe %d\n", i, intel_crtc->pipe);
3183 prepare: /* separate function? */
3184 DRM_DEBUG_DRIVER("switching PLL %x off\n", pll->pll_reg);
3186 /* Wait for the clocks to stabilize before rewriting the regs */
3187 I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE);
3188 POSTING_READ(pll->pll_reg);
3191 I915_WRITE(pll->fp0_reg, fp);
3192 I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE);
3197 void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
3199 struct drm_i915_private *dev_priv = dev->dev_private;
3200 int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
3203 temp = I915_READ(dslreg);
3205 if (wait_for(I915_READ(dslreg) != temp, 5)) {
3206 /* Without this, mode sets may fail silently on FDI */
3207 I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
3209 I915_WRITE(tc2reg, 0);
3210 if (wait_for(I915_READ(dslreg) != temp, 5))
3211 DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
3215 static void ironlake_crtc_enable(struct drm_crtc *crtc)
3217 struct drm_device *dev = crtc->dev;
3218 struct drm_i915_private *dev_priv = dev->dev_private;
3219 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3220 struct intel_encoder *encoder;
3221 int pipe = intel_crtc->pipe;
3222 int plane = intel_crtc->plane;
3226 WARN_ON(!crtc->enabled);
3228 if (intel_crtc->active)
3231 intel_crtc->active = true;
3232 intel_update_watermarks(dev);
3234 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
3235 temp = I915_READ(PCH_LVDS);
3236 if ((temp & LVDS_PORT_EN) == 0)
3237 I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
3240 is_pch_port = ironlake_crtc_driving_pch(crtc);
3243 /* Note: FDI PLL enabling _must_ be done before we enable the
3244 * cpu pipes, hence this is separate from all the other fdi/pch
3246 ironlake_fdi_pll_enable(intel_crtc);
3248 assert_fdi_tx_disabled(dev_priv, pipe);
3249 assert_fdi_rx_disabled(dev_priv, pipe);
3252 for_each_encoder_on_crtc(dev, crtc, encoder)
3253 if (encoder->pre_enable)
3254 encoder->pre_enable(encoder);
3256 /* Enable panel fitting for LVDS */
3257 if (dev_priv->pch_pf_size &&
3258 (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) {
3259 /* Force use of hard-coded filter coefficients
3260 * as some pre-programmed values are broken,
3263 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3264 I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
3265 I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
3269 * On ILK+ LUT must be loaded before the pipe is running but with
3272 intel_crtc_load_lut(crtc);
3274 intel_enable_pipe(dev_priv, pipe, is_pch_port);
3275 intel_enable_plane(dev_priv, plane, pipe);
3278 ironlake_pch_enable(crtc);
3280 mutex_lock(&dev->struct_mutex);
3281 intel_update_fbc(dev);
3282 mutex_unlock(&dev->struct_mutex);
3284 intel_crtc_update_cursor(crtc, true);
3286 for_each_encoder_on_crtc(dev, crtc, encoder)
3287 encoder->enable(encoder);
3289 if (HAS_PCH_CPT(dev))
3290 intel_cpt_verify_modeset(dev, intel_crtc->pipe);
3293 * There seems to be a race in PCH platform hw (at least on some
3294 * outputs) where an enabled pipe still completes any pageflip right
3295 * away (as if the pipe is off) instead of waiting for vblank. As soon
3296 * as the first vblank happend, everything works as expected. Hence just
3297 * wait for one vblank before returning to avoid strange things
3300 intel_wait_for_vblank(dev, intel_crtc->pipe);
3303 static void haswell_crtc_enable(struct drm_crtc *crtc)
3305 struct drm_device *dev = crtc->dev;
3306 struct drm_i915_private *dev_priv = dev->dev_private;
3307 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3308 struct intel_encoder *encoder;
3309 int pipe = intel_crtc->pipe;
3310 int plane = intel_crtc->plane;
3313 WARN_ON(!crtc->enabled);
3315 if (intel_crtc->active)
3318 intel_crtc->active = true;
3319 intel_update_watermarks(dev);
3321 is_pch_port = haswell_crtc_driving_pch(crtc);
3324 ironlake_fdi_pll_enable(intel_crtc);
3326 for_each_encoder_on_crtc(dev, crtc, encoder)
3327 if (encoder->pre_enable)
3328 encoder->pre_enable(encoder);
3330 intel_ddi_enable_pipe_clock(intel_crtc);
3332 /* Enable panel fitting for eDP */
3333 if (dev_priv->pch_pf_size && HAS_eDP) {
3334 /* Force use of hard-coded filter coefficients
3335 * as some pre-programmed values are broken,
3338 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3339 I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
3340 I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
3344 * On ILK+ LUT must be loaded before the pipe is running but with
3347 intel_crtc_load_lut(crtc);
3349 intel_ddi_set_pipe_settings(crtc);
3350 intel_ddi_enable_pipe_func(crtc);
3352 intel_enable_pipe(dev_priv, pipe, is_pch_port);
3353 intel_enable_plane(dev_priv, plane, pipe);
3356 ironlake_pch_enable(crtc);
3358 mutex_lock(&dev->struct_mutex);
3359 intel_update_fbc(dev);
3360 mutex_unlock(&dev->struct_mutex);
3362 intel_crtc_update_cursor(crtc, true);
3364 for_each_encoder_on_crtc(dev, crtc, encoder)
3365 encoder->enable(encoder);
3368 * There seems to be a race in PCH platform hw (at least on some
3369 * outputs) where an enabled pipe still completes any pageflip right
3370 * away (as if the pipe is off) instead of waiting for vblank. As soon
3371 * as the first vblank happend, everything works as expected. Hence just
3372 * wait for one vblank before returning to avoid strange things
3375 intel_wait_for_vblank(dev, intel_crtc->pipe);
3378 static void ironlake_crtc_disable(struct drm_crtc *crtc)
3380 struct drm_device *dev = crtc->dev;
3381 struct drm_i915_private *dev_priv = dev->dev_private;
3382 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3383 struct intel_encoder *encoder;
3384 int pipe = intel_crtc->pipe;
3385 int plane = intel_crtc->plane;
3389 if (!intel_crtc->active)
3392 for_each_encoder_on_crtc(dev, crtc, encoder)
3393 encoder->disable(encoder);
3395 intel_crtc_wait_for_pending_flips(crtc);
3396 drm_vblank_off(dev, pipe);
3397 intel_crtc_update_cursor(crtc, false);
3399 intel_disable_plane(dev_priv, plane, pipe);
3401 if (dev_priv->cfb_plane == plane)
3402 intel_disable_fbc(dev);
3404 intel_disable_pipe(dev_priv, pipe);
3407 I915_WRITE(PF_CTL(pipe), 0);
3408 I915_WRITE(PF_WIN_SZ(pipe), 0);
3410 for_each_encoder_on_crtc(dev, crtc, encoder)
3411 if (encoder->post_disable)
3412 encoder->post_disable(encoder);
3414 ironlake_fdi_disable(crtc);
3416 intel_disable_transcoder(dev_priv, pipe);
3418 if (HAS_PCH_CPT(dev)) {
3419 /* disable TRANS_DP_CTL */
3420 reg = TRANS_DP_CTL(pipe);
3421 temp = I915_READ(reg);
3422 temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
3423 temp |= TRANS_DP_PORT_SEL_NONE;
3424 I915_WRITE(reg, temp);
3426 /* disable DPLL_SEL */
3427 temp = I915_READ(PCH_DPLL_SEL);
3430 temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
3433 temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
3436 /* C shares PLL A or B */
3437 temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
3442 I915_WRITE(PCH_DPLL_SEL, temp);
3445 /* disable PCH DPLL */
3446 intel_disable_pch_pll(intel_crtc);
3448 ironlake_fdi_pll_disable(intel_crtc);
3450 intel_crtc->active = false;
3451 intel_update_watermarks(dev);
3453 mutex_lock(&dev->struct_mutex);
3454 intel_update_fbc(dev);
3455 mutex_unlock(&dev->struct_mutex);
3458 static void haswell_crtc_disable(struct drm_crtc *crtc)
3460 struct drm_device *dev = crtc->dev;
3461 struct drm_i915_private *dev_priv = dev->dev_private;
3462 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3463 struct intel_encoder *encoder;
3464 int pipe = intel_crtc->pipe;
3465 int plane = intel_crtc->plane;
3466 enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
3469 if (!intel_crtc->active)
3472 is_pch_port = haswell_crtc_driving_pch(crtc);
3474 for_each_encoder_on_crtc(dev, crtc, encoder)
3475 encoder->disable(encoder);
3477 intel_crtc_wait_for_pending_flips(crtc);
3478 drm_vblank_off(dev, pipe);
3479 intel_crtc_update_cursor(crtc, false);
3481 intel_disable_plane(dev_priv, plane, pipe);
3483 if (dev_priv->cfb_plane == plane)
3484 intel_disable_fbc(dev);
3486 intel_disable_pipe(dev_priv, pipe);
3488 intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
3491 I915_WRITE(PF_CTL(pipe), 0);
3492 I915_WRITE(PF_WIN_SZ(pipe), 0);
3494 intel_ddi_disable_pipe_clock(intel_crtc);
3496 for_each_encoder_on_crtc(dev, crtc, encoder)
3497 if (encoder->post_disable)
3498 encoder->post_disable(encoder);
3501 ironlake_fdi_disable(crtc);
3502 intel_disable_transcoder(dev_priv, pipe);
3503 intel_disable_pch_pll(intel_crtc);
3504 ironlake_fdi_pll_disable(intel_crtc);
3507 intel_crtc->active = false;
3508 intel_update_watermarks(dev);
3510 mutex_lock(&dev->struct_mutex);
3511 intel_update_fbc(dev);
3512 mutex_unlock(&dev->struct_mutex);
3515 static void ironlake_crtc_off(struct drm_crtc *crtc)
3517 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3518 intel_put_pch_pll(intel_crtc);
3521 static void haswell_crtc_off(struct drm_crtc *crtc)
3523 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3525 /* Stop saying we're using TRANSCODER_EDP because some other CRTC might
3526 * start using it. */
3527 intel_crtc->cpu_transcoder = intel_crtc->pipe;
3529 intel_ddi_put_crtc_pll(crtc);
3532 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
3534 if (!enable && intel_crtc->overlay) {
3535 struct drm_device *dev = intel_crtc->base.dev;
3536 struct drm_i915_private *dev_priv = dev->dev_private;
3538 mutex_lock(&dev->struct_mutex);
3539 dev_priv->mm.interruptible = false;
3540 (void) intel_overlay_switch_off(intel_crtc->overlay);
3541 dev_priv->mm.interruptible = true;
3542 mutex_unlock(&dev->struct_mutex);
3545 /* Let userspace switch the overlay on again. In most cases userspace
3546 * has to recompute where to put it anyway.
3550 static void i9xx_crtc_enable(struct drm_crtc *crtc)
3552 struct drm_device *dev = crtc->dev;
3553 struct drm_i915_private *dev_priv = dev->dev_private;
3554 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3555 struct intel_encoder *encoder;
3556 int pipe = intel_crtc->pipe;
3557 int plane = intel_crtc->plane;
3559 WARN_ON(!crtc->enabled);
3561 if (intel_crtc->active)
3564 intel_crtc->active = true;
3565 intel_update_watermarks(dev);
3567 intel_enable_pll(dev_priv, pipe);
3568 intel_enable_pipe(dev_priv, pipe, false);
3569 intel_enable_plane(dev_priv, plane, pipe);
3571 intel_crtc_load_lut(crtc);
3572 intel_update_fbc(dev);
3574 /* Give the overlay scaler a chance to enable if it's on this pipe */
3575 intel_crtc_dpms_overlay(intel_crtc, true);
3576 intel_crtc_update_cursor(crtc, true);
3578 for_each_encoder_on_crtc(dev, crtc, encoder)
3579 encoder->enable(encoder);
3582 static void i9xx_crtc_disable(struct drm_crtc *crtc)
3584 struct drm_device *dev = crtc->dev;
3585 struct drm_i915_private *dev_priv = dev->dev_private;
3586 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3587 struct intel_encoder *encoder;
3588 int pipe = intel_crtc->pipe;
3589 int plane = intel_crtc->plane;
3592 if (!intel_crtc->active)
3595 for_each_encoder_on_crtc(dev, crtc, encoder)
3596 encoder->disable(encoder);
3598 /* Give the overlay scaler a chance to disable if it's on this pipe */
3599 intel_crtc_wait_for_pending_flips(crtc);
3600 drm_vblank_off(dev, pipe);
3601 intel_crtc_dpms_overlay(intel_crtc, false);
3602 intel_crtc_update_cursor(crtc, false);
3604 if (dev_priv->cfb_plane == plane)
3605 intel_disable_fbc(dev);
3607 intel_disable_plane(dev_priv, plane, pipe);
3608 intel_disable_pipe(dev_priv, pipe);
3609 intel_disable_pll(dev_priv, pipe);
3611 intel_crtc->active = false;
3612 intel_update_fbc(dev);
3613 intel_update_watermarks(dev);
3616 static void i9xx_crtc_off(struct drm_crtc *crtc)
3620 static void intel_crtc_update_sarea(struct drm_crtc *crtc,
3623 struct drm_device *dev = crtc->dev;
3624 struct drm_i915_master_private *master_priv;
3625 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3626 int pipe = intel_crtc->pipe;
3628 if (!dev->primary->master)
3631 master_priv = dev->primary->master->driver_priv;
3632 if (!master_priv->sarea_priv)
3637 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
3638 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
3641 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
3642 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
3645 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
3651 * Sets the power management mode of the pipe and plane.
3653 void intel_crtc_update_dpms(struct drm_crtc *crtc)
3655 struct drm_device *dev = crtc->dev;
3656 struct drm_i915_private *dev_priv = dev->dev_private;
3657 struct intel_encoder *intel_encoder;
3658 bool enable = false;
3660 for_each_encoder_on_crtc(dev, crtc, intel_encoder)
3661 enable |= intel_encoder->connectors_active;
3664 dev_priv->display.crtc_enable(crtc);
3666 dev_priv->display.crtc_disable(crtc);
3668 intel_crtc_update_sarea(crtc, enable);
3671 static void intel_crtc_noop(struct drm_crtc *crtc)
3675 static void intel_crtc_disable(struct drm_crtc *crtc)
3677 struct drm_device *dev = crtc->dev;
3678 struct drm_connector *connector;
3679 struct drm_i915_private *dev_priv = dev->dev_private;
3681 /* crtc should still be enabled when we disable it. */
3682 WARN_ON(!crtc->enabled);
3684 dev_priv->display.crtc_disable(crtc);
3685 intel_crtc_update_sarea(crtc, false);
3686 dev_priv->display.off(crtc);
3688 assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
3689 assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
3692 mutex_lock(&dev->struct_mutex);
3693 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
3694 mutex_unlock(&dev->struct_mutex);
3698 /* Update computed state. */
3699 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
3700 if (!connector->encoder || !connector->encoder->crtc)
3703 if (connector->encoder->crtc != crtc)
3706 connector->dpms = DRM_MODE_DPMS_OFF;
3707 to_intel_encoder(connector->encoder)->connectors_active = false;
3711 void intel_modeset_disable(struct drm_device *dev)
3713 struct drm_crtc *crtc;
3715 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3717 intel_crtc_disable(crtc);
3721 void intel_encoder_noop(struct drm_encoder *encoder)
3725 void intel_encoder_destroy(struct drm_encoder *encoder)
3727 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
3729 drm_encoder_cleanup(encoder);
3730 kfree(intel_encoder);
3733 /* Simple dpms helper for encodres with just one connector, no cloning and only
3734 * one kind of off state. It clamps all !ON modes to fully OFF and changes the
3735 * state of the entire output pipe. */
3736 void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
3738 if (mode == DRM_MODE_DPMS_ON) {
3739 encoder->connectors_active = true;
3741 intel_crtc_update_dpms(encoder->base.crtc);
3743 encoder->connectors_active = false;
3745 intel_crtc_update_dpms(encoder->base.crtc);
3749 /* Cross check the actual hw state with our own modeset state tracking (and it's
3750 * internal consistency). */
3751 static void intel_connector_check_state(struct intel_connector *connector)
3753 if (connector->get_hw_state(connector)) {
3754 struct intel_encoder *encoder = connector->encoder;
3755 struct drm_crtc *crtc;
3756 bool encoder_enabled;
3759 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
3760 connector->base.base.id,
3761 drm_get_connector_name(&connector->base));
3763 WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
3764 "wrong connector dpms state\n");
3765 WARN(connector->base.encoder != &encoder->base,
3766 "active connector not linked to encoder\n");
3767 WARN(!encoder->connectors_active,
3768 "encoder->connectors_active not set\n");
3770 encoder_enabled = encoder->get_hw_state(encoder, &pipe);
3771 WARN(!encoder_enabled, "encoder not enabled\n");
3772 if (WARN_ON(!encoder->base.crtc))
3775 crtc = encoder->base.crtc;
3777 WARN(!crtc->enabled, "crtc not enabled\n");
3778 WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
3779 WARN(pipe != to_intel_crtc(crtc)->pipe,
3780 "encoder active on the wrong pipe\n");
3784 /* Even simpler default implementation, if there's really no special case to
3786 void intel_connector_dpms(struct drm_connector *connector, int mode)
3788 struct intel_encoder *encoder = intel_attached_encoder(connector);
3790 /* All the simple cases only support two dpms states. */
3791 if (mode != DRM_MODE_DPMS_ON)
3792 mode = DRM_MODE_DPMS_OFF;
3794 if (mode == connector->dpms)
3797 connector->dpms = mode;
3799 /* Only need to change hw state when actually enabled */
3800 if (encoder->base.crtc)
3801 intel_encoder_dpms(encoder, mode);
3803 WARN_ON(encoder->connectors_active != false);
3805 intel_modeset_check_state(connector->dev);
3808 /* Simple connector->get_hw_state implementation for encoders that support only
3809 * one connector and no cloning and hence the encoder state determines the state
3810 * of the connector. */
3811 bool intel_connector_get_hw_state(struct intel_connector *connector)
3814 struct intel_encoder *encoder = connector->encoder;
3816 return encoder->get_hw_state(encoder, &pipe);
3819 static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
3820 const struct drm_display_mode *mode,
3821 struct drm_display_mode *adjusted_mode)
3823 struct drm_device *dev = crtc->dev;
3825 if (HAS_PCH_SPLIT(dev)) {
3826 /* FDI link clock is fixed at 2.7G */
3827 if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
3831 /* All interlaced capable intel hw wants timings in frames. Note though
3832 * that intel_lvds_mode_fixup does some funny tricks with the crtc
3833 * timings, so we need to be careful not to clobber these.*/
3834 if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET))
3835 drm_mode_set_crtcinfo(adjusted_mode, 0);
3837 /* WaPruneModeWithIncorrectHsyncOffset: Cantiga+ cannot handle modes
3838 * with a hsync front porch of 0.
3840 if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
3841 adjusted_mode->hsync_start == adjusted_mode->hdisplay)
3847 static int valleyview_get_display_clock_speed(struct drm_device *dev)
3849 return 400000; /* FIXME */
3852 static int i945_get_display_clock_speed(struct drm_device *dev)
3857 static int i915_get_display_clock_speed(struct drm_device *dev)
3862 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
3867 static int i915gm_get_display_clock_speed(struct drm_device *dev)
3871 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
3873 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
3876 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
3877 case GC_DISPLAY_CLOCK_333_MHZ:
3880 case GC_DISPLAY_CLOCK_190_200_MHZ:
3886 static int i865_get_display_clock_speed(struct drm_device *dev)
3891 static int i855_get_display_clock_speed(struct drm_device *dev)
3894 /* Assume that the hardware is in the high speed state. This
3895 * should be the default.
3897 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
3898 case GC_CLOCK_133_200:
3899 case GC_CLOCK_100_200:
3901 case GC_CLOCK_166_250:
3903 case GC_CLOCK_100_133:
3907 /* Shouldn't happen */
3911 static int i830_get_display_clock_speed(struct drm_device *dev)
3925 fdi_reduce_ratio(u32 *num, u32 *den)
3927 while (*num > 0xffffff || *den > 0xffffff) {
3934 ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
3935 int link_clock, struct fdi_m_n *m_n)
3937 m_n->tu = 64; /* default size */
3939 /* BUG_ON(pixel_clock > INT_MAX / 36); */
3940 m_n->gmch_m = bits_per_pixel * pixel_clock;
3941 m_n->gmch_n = link_clock * nlanes * 8;
3942 fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
3944 m_n->link_m = pixel_clock;
3945 m_n->link_n = link_clock;
3946 fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
3949 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
3951 if (i915_panel_use_ssc >= 0)
3952 return i915_panel_use_ssc != 0;
3953 return dev_priv->lvds_use_ssc
3954 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
3958 * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
3959 * @crtc: CRTC structure
3960 * @mode: requested mode
3962 * A pipe may be connected to one or more outputs. Based on the depth of the
3963 * attached framebuffer, choose a good color depth to use on the pipe.
3965 * If possible, match the pipe depth to the fb depth. In some cases, this
3966 * isn't ideal, because the connected output supports a lesser or restricted
3967 * set of depths. Resolve that here:
3968 * LVDS typically supports only 6bpc, so clamp down in that case
3969 * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
3970 * Displays may support a restricted set as well, check EDID and clamp as
3972 * DP may want to dither down to 6bpc to fit larger modes
3975 * Dithering requirement (i.e. false if display bpc and pipe bpc match,
3976 * true if they don't match).
3978 static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
3979 struct drm_framebuffer *fb,
3980 unsigned int *pipe_bpp,
3981 struct drm_display_mode *mode)
3983 struct drm_device *dev = crtc->dev;
3984 struct drm_i915_private *dev_priv = dev->dev_private;
3985 struct drm_connector *connector;
3986 struct intel_encoder *intel_encoder;
3987 unsigned int display_bpc = UINT_MAX, bpc;
3989 /* Walk the encoders & connectors on this crtc, get min bpc */
3990 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
3992 if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
3993 unsigned int lvds_bpc;
3995 if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
4001 if (lvds_bpc < display_bpc) {
4002 DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
4003 display_bpc = lvds_bpc;
4008 /* Not one of the known troublemakers, check the EDID */
4009 list_for_each_entry(connector, &dev->mode_config.connector_list,
4011 if (connector->encoder != &intel_encoder->base)
4014 /* Don't use an invalid EDID bpc value */
4015 if (connector->display_info.bpc &&
4016 connector->display_info.bpc < display_bpc) {
4017 DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
4018 display_bpc = connector->display_info.bpc;
4023 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
4024 * through, clamp it down. (Note: >12bpc will be caught below.)
4026 if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
4027 if (display_bpc > 8 && display_bpc < 12) {
4028 DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
4031 DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
4037 if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
4038 DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
4043 * We could just drive the pipe at the highest bpc all the time and
4044 * enable dithering as needed, but that costs bandwidth. So choose
4045 * the minimum value that expresses the full color range of the fb but
4046 * also stays within the max display bpc discovered above.
4049 switch (fb->depth) {
4051 bpc = 8; /* since we go through a colormap */
4055 bpc = 6; /* min is 18bpp */
4067 DRM_DEBUG("unsupported depth, assuming 24 bits\n");
4068 bpc = min((unsigned int)8, display_bpc);
4072 display_bpc = min(display_bpc, bpc);
4074 DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
4077 *pipe_bpp = display_bpc * 3;
4079 return display_bpc != bpc;
4082 static int vlv_get_refclk(struct drm_crtc *crtc)
4084 struct drm_device *dev = crtc->dev;
4085 struct drm_i915_private *dev_priv = dev->dev_private;
4086 int refclk = 27000; /* for DP & HDMI */
4088 return 100000; /* only one validated so far */
4090 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
4092 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
4093 if (intel_panel_use_ssc(dev_priv))
4097 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
4104 static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
4106 struct drm_device *dev = crtc->dev;
4107 struct drm_i915_private *dev_priv = dev->dev_private;
4110 if (IS_VALLEYVIEW(dev)) {
4111 refclk = vlv_get_refclk(crtc);
4112 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4113 intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
4114 refclk = dev_priv->lvds_ssc_freq * 1000;
4115 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
4117 } else if (!IS_GEN2(dev)) {
4126 static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode,
4127 intel_clock_t *clock)
4129 /* SDVO TV has fixed PLL values depend on its clock range,
4130 this mirrors vbios setting. */
4131 if (adjusted_mode->clock >= 100000
4132 && adjusted_mode->clock < 140500) {
4138 } else if (adjusted_mode->clock >= 140500
4139 && adjusted_mode->clock <= 200000) {
4148 static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
4149 intel_clock_t *clock,
4150 intel_clock_t *reduced_clock)
4152 struct drm_device *dev = crtc->dev;
4153 struct drm_i915_private *dev_priv = dev->dev_private;
4154 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4155 int pipe = intel_crtc->pipe;
4158 if (IS_PINEVIEW(dev)) {
4159 fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
4161 fp2 = (1 << reduced_clock->n) << 16 |
4162 reduced_clock->m1 << 8 | reduced_clock->m2;
4164 fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
4166 fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
4170 I915_WRITE(FP0(pipe), fp);
4172 intel_crtc->lowfreq_avail = false;
4173 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4174 reduced_clock && i915_powersave) {
4175 I915_WRITE(FP1(pipe), fp2);
4176 intel_crtc->lowfreq_avail = true;
4178 I915_WRITE(FP1(pipe), fp);
4182 static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock,
4183 struct drm_display_mode *adjusted_mode)
4185 struct drm_device *dev = crtc->dev;
4186 struct drm_i915_private *dev_priv = dev->dev_private;
4187 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4188 int pipe = intel_crtc->pipe;
4191 temp = I915_READ(LVDS);
4192 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
4194 temp |= LVDS_PIPEB_SELECT;
4196 temp &= ~LVDS_PIPEB_SELECT;
4198 /* set the corresponsding LVDS_BORDER bit */
4199 temp |= dev_priv->lvds_border_bits;
4200 /* Set the B0-B3 data pairs corresponding to whether we're going to
4201 * set the DPLLs for dual-channel mode or not.
4204 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
4206 temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
4208 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
4209 * appropriately here, but we need to look more thoroughly into how
4210 * panels behave in the two modes.
4212 /* set the dithering flag on LVDS as needed */
4213 if (INTEL_INFO(dev)->gen >= 4) {
4214 if (dev_priv->lvds_dither)
4215 temp |= LVDS_ENABLE_DITHER;
4217 temp &= ~LVDS_ENABLE_DITHER;
4219 temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
4220 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
4221 temp |= LVDS_HSYNC_POLARITY;
4222 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
4223 temp |= LVDS_VSYNC_POLARITY;
4224 I915_WRITE(LVDS, temp);
4227 static void vlv_update_pll(struct drm_crtc *crtc,
4228 struct drm_display_mode *mode,
4229 struct drm_display_mode *adjusted_mode,
4230 intel_clock_t *clock, intel_clock_t *reduced_clock,
4233 struct drm_device *dev = crtc->dev;
4234 struct drm_i915_private *dev_priv = dev->dev_private;
4235 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4236 int pipe = intel_crtc->pipe;
4237 u32 dpll, mdiv, pdiv;
4238 u32 bestn, bestm1, bestm2, bestp1, bestp2;
4242 is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
4243 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
4245 dpll = DPLL_VGA_MODE_DIS;
4246 dpll |= DPLL_EXT_BUFFER_ENABLE_VLV;
4247 dpll |= DPLL_REFA_CLK_ENABLE_VLV;
4248 dpll |= DPLL_INTEGRATED_CLOCK_VLV;
4250 I915_WRITE(DPLL(pipe), dpll);
4251 POSTING_READ(DPLL(pipe));
4260 * In Valleyview PLL and program lane counter registers are exposed
4261 * through DPIO interface
4263 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
4264 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
4265 mdiv |= ((bestn << DPIO_N_SHIFT));
4266 mdiv |= (1 << DPIO_POST_DIV_SHIFT);
4267 mdiv |= (1 << DPIO_K_SHIFT);
4268 mdiv |= DPIO_ENABLE_CALIBRATION;
4269 intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
4271 intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), 0x01000000);
4273 pdiv = (1 << DPIO_REFSEL_OVERRIDE) | (5 << DPIO_PLL_MODESEL_SHIFT) |
4274 (3 << DPIO_BIAS_CURRENT_CTL_SHIFT) | (1<<20) |
4275 (7 << DPIO_PLL_REFCLK_SEL_SHIFT) | (8 << DPIO_DRIVER_CTL_SHIFT) |
4276 (5 << DPIO_CLK_BIAS_CTL_SHIFT);
4277 intel_dpio_write(dev_priv, DPIO_REFSFR(pipe), pdiv);
4279 intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x005f003b);
4281 dpll |= DPLL_VCO_ENABLE;
4282 I915_WRITE(DPLL(pipe), dpll);
4283 POSTING_READ(DPLL(pipe));
4284 if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
4285 DRM_ERROR("DPLL %d failed to lock\n", pipe);
4287 intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x620);
4289 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
4290 intel_dp_set_m_n(crtc, mode, adjusted_mode);
4292 I915_WRITE(DPLL(pipe), dpll);
4294 /* Wait for the clocks to stabilize. */
4295 POSTING_READ(DPLL(pipe));
4300 temp = intel_mode_get_pixel_multiplier(adjusted_mode);
4302 temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4306 I915_WRITE(DPLL_MD(pipe), temp);
4307 POSTING_READ(DPLL_MD(pipe));
4309 /* Now program lane control registers */
4310 if(intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)
4311 || intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
4316 intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL1, temp);
4318 if(intel_pipe_has_type(crtc,INTEL_OUTPUT_EDP))
4323 intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL2, temp);
4327 static void i9xx_update_pll(struct drm_crtc *crtc,
4328 struct drm_display_mode *mode,
4329 struct drm_display_mode *adjusted_mode,
4330 intel_clock_t *clock, intel_clock_t *reduced_clock,
4333 struct drm_device *dev = crtc->dev;
4334 struct drm_i915_private *dev_priv = dev->dev_private;
4335 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4336 int pipe = intel_crtc->pipe;
4340 i9xx_update_pll_dividers(crtc, clock, reduced_clock);
4342 is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
4343 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
4345 dpll = DPLL_VGA_MODE_DIS;
4347 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
4348 dpll |= DPLLB_MODE_LVDS;
4350 dpll |= DPLLB_MODE_DAC_SERIAL;
4352 int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
4353 if (pixel_multiplier > 1) {
4354 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
4355 dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
4357 dpll |= DPLL_DVO_HIGH_SPEED;
4359 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
4360 dpll |= DPLL_DVO_HIGH_SPEED;
4362 /* compute bitmask from p1 value */
4363 if (IS_PINEVIEW(dev))
4364 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
4366 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4367 if (IS_G4X(dev) && reduced_clock)
4368 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
4370 switch (clock->p2) {
4372 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
4375 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
4378 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
4381 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
4384 if (INTEL_INFO(dev)->gen >= 4)
4385 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
4387 if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
4388 dpll |= PLL_REF_INPUT_TVCLKINBC;
4389 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
4390 /* XXX: just matching BIOS for now */
4391 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
4393 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4394 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4395 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4397 dpll |= PLL_REF_INPUT_DREFCLK;
4399 dpll |= DPLL_VCO_ENABLE;
4400 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
4401 POSTING_READ(DPLL(pipe));
4404 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
4405 * This is an exception to the general rule that mode_set doesn't turn
4408 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
4409 intel_update_lvds(crtc, clock, adjusted_mode);
4411 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
4412 intel_dp_set_m_n(crtc, mode, adjusted_mode);
4414 I915_WRITE(DPLL(pipe), dpll);
4416 /* Wait for the clocks to stabilize. */
4417 POSTING_READ(DPLL(pipe));
4420 if (INTEL_INFO(dev)->gen >= 4) {
4423 temp = intel_mode_get_pixel_multiplier(adjusted_mode);
4425 temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4429 I915_WRITE(DPLL_MD(pipe), temp);
4431 /* The pixel multiplier can only be updated once the
4432 * DPLL is enabled and the clocks are stable.
4434 * So write it again.
4436 I915_WRITE(DPLL(pipe), dpll);
4440 static void i8xx_update_pll(struct drm_crtc *crtc,
4441 struct drm_display_mode *adjusted_mode,
4442 intel_clock_t *clock, intel_clock_t *reduced_clock,
4445 struct drm_device *dev = crtc->dev;
4446 struct drm_i915_private *dev_priv = dev->dev_private;
4447 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4448 int pipe = intel_crtc->pipe;
4451 i9xx_update_pll_dividers(crtc, clock, reduced_clock);
4453 dpll = DPLL_VGA_MODE_DIS;
4455 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
4456 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4459 dpll |= PLL_P1_DIVIDE_BY_TWO;
4461 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4463 dpll |= PLL_P2_DIVIDE_BY_4;
4466 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
4467 /* XXX: just matching BIOS for now */
4468 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
4470 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4471 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4472 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4474 dpll |= PLL_REF_INPUT_DREFCLK;
4476 dpll |= DPLL_VCO_ENABLE;
4477 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
4478 POSTING_READ(DPLL(pipe));
4481 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
4482 * This is an exception to the general rule that mode_set doesn't turn
4485 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
4486 intel_update_lvds(crtc, clock, adjusted_mode);
4488 I915_WRITE(DPLL(pipe), dpll);
4490 /* Wait for the clocks to stabilize. */
4491 POSTING_READ(DPLL(pipe));
4494 /* The pixel multiplier can only be updated once the
4495 * DPLL is enabled and the clocks are stable.
4497 * So write it again.
4499 I915_WRITE(DPLL(pipe), dpll);
4502 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
4503 struct drm_display_mode *mode,
4504 struct drm_display_mode *adjusted_mode)
4506 struct drm_device *dev = intel_crtc->base.dev;
4507 struct drm_i915_private *dev_priv = dev->dev_private;
4508 enum pipe pipe = intel_crtc->pipe;
4509 enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
4510 uint32_t vsyncshift;
4512 if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
4513 /* the chip adds 2 halflines automatically */
4514 adjusted_mode->crtc_vtotal -= 1;
4515 adjusted_mode->crtc_vblank_end -= 1;
4516 vsyncshift = adjusted_mode->crtc_hsync_start
4517 - adjusted_mode->crtc_htotal / 2;
4522 if (INTEL_INFO(dev)->gen > 3)
4523 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
4525 I915_WRITE(HTOTAL(cpu_transcoder),
4526 (adjusted_mode->crtc_hdisplay - 1) |
4527 ((adjusted_mode->crtc_htotal - 1) << 16));
4528 I915_WRITE(HBLANK(cpu_transcoder),
4529 (adjusted_mode->crtc_hblank_start - 1) |
4530 ((adjusted_mode->crtc_hblank_end - 1) << 16));
4531 I915_WRITE(HSYNC(cpu_transcoder),
4532 (adjusted_mode->crtc_hsync_start - 1) |
4533 ((adjusted_mode->crtc_hsync_end - 1) << 16));
4535 I915_WRITE(VTOTAL(cpu_transcoder),
4536 (adjusted_mode->crtc_vdisplay - 1) |
4537 ((adjusted_mode->crtc_vtotal - 1) << 16));
4538 I915_WRITE(VBLANK(cpu_transcoder),
4539 (adjusted_mode->crtc_vblank_start - 1) |
4540 ((adjusted_mode->crtc_vblank_end - 1) << 16));
4541 I915_WRITE(VSYNC(cpu_transcoder),
4542 (adjusted_mode->crtc_vsync_start - 1) |
4543 ((adjusted_mode->crtc_vsync_end - 1) << 16));
4545 /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
4546 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
4547 * documented on the DDI_FUNC_CTL register description, EDP Input Select
4549 if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
4550 (pipe == PIPE_B || pipe == PIPE_C))
4551 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
4553 /* pipesrc controls the size that is scaled from, which should
4554 * always be the user's requested size.
4556 I915_WRITE(PIPESRC(pipe),
4557 ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
4560 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
4561 struct drm_display_mode *mode,
4562 struct drm_display_mode *adjusted_mode,
4564 struct drm_framebuffer *fb)
4566 struct drm_device *dev = crtc->dev;
4567 struct drm_i915_private *dev_priv = dev->dev_private;
4568 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4569 int pipe = intel_crtc->pipe;
4570 int plane = intel_crtc->plane;
4571 int refclk, num_connectors = 0;
4572 intel_clock_t clock, reduced_clock;
4573 u32 dspcntr, pipeconf;
4574 bool ok, has_reduced_clock = false, is_sdvo = false;
4575 bool is_lvds = false, is_tv = false, is_dp = false;
4576 struct intel_encoder *encoder;
4577 const intel_limit_t *limit;
4580 for_each_encoder_on_crtc(dev, crtc, encoder) {
4581 switch (encoder->type) {
4582 case INTEL_OUTPUT_LVDS:
4585 case INTEL_OUTPUT_SDVO:
4586 case INTEL_OUTPUT_HDMI:
4588 if (encoder->needs_tv_clock)
4591 case INTEL_OUTPUT_TVOUT:
4594 case INTEL_OUTPUT_DISPLAYPORT:
4602 refclk = i9xx_get_refclk(crtc, num_connectors);
4605 * Returns a set of divisors for the desired target clock with the given
4606 * refclk, or FALSE. The returned values represent the clock equation:
4607 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
4609 limit = intel_limit(crtc, refclk);
4610 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
4613 DRM_ERROR("Couldn't find PLL settings for mode!\n");
4617 /* Ensure that the cursor is valid for the new mode before changing... */
4618 intel_crtc_update_cursor(crtc, true);
4620 if (is_lvds && dev_priv->lvds_downclock_avail) {
4622 * Ensure we match the reduced clock's P to the target clock.
4623 * If the clocks don't match, we can't switch the display clock
4624 * by using the FP0/FP1. In such case we will disable the LVDS
4625 * downclock feature.
4627 has_reduced_clock = limit->find_pll(limit, crtc,
4628 dev_priv->lvds_downclock,
4634 if (is_sdvo && is_tv)
4635 i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
4638 i8xx_update_pll(crtc, adjusted_mode, &clock,
4639 has_reduced_clock ? &reduced_clock : NULL,
4641 else if (IS_VALLEYVIEW(dev))
4642 vlv_update_pll(crtc, mode, adjusted_mode, &clock,
4643 has_reduced_clock ? &reduced_clock : NULL,
4646 i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
4647 has_reduced_clock ? &reduced_clock : NULL,
4650 /* setup pipeconf */
4651 pipeconf = I915_READ(PIPECONF(pipe));
4653 /* Set up the display plane register */
4654 dspcntr = DISPPLANE_GAMMA_ENABLE;
4657 dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
4659 dspcntr |= DISPPLANE_SEL_PIPE_B;
4661 if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
4662 /* Enable pixel doubling when the dot clock is > 90% of the (display)
4665 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
4669 dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
4670 pipeconf |= PIPECONF_DOUBLE_WIDE;
4672 pipeconf &= ~PIPECONF_DOUBLE_WIDE;
4675 /* default to 8bpc */
4676 pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
4678 if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
4679 pipeconf |= PIPECONF_BPP_6 |
4680 PIPECONF_DITHER_EN |
4681 PIPECONF_DITHER_TYPE_SP;
4685 if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
4686 if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
4687 pipeconf |= PIPECONF_BPP_6 |
4689 I965_PIPECONF_ACTIVE;
4693 DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
4694 drm_mode_debug_printmodeline(mode);
4696 if (HAS_PIPE_CXSR(dev)) {
4697 if (intel_crtc->lowfreq_avail) {
4698 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
4699 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
4701 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
4702 pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
4706 pipeconf &= ~PIPECONF_INTERLACE_MASK;
4707 if (!IS_GEN2(dev) &&
4708 adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
4709 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
4711 pipeconf |= PIPECONF_PROGRESSIVE;
4713 intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
4715 /* pipesrc and dspsize control the size that is scaled from,
4716 * which should always be the user's requested size.
4718 I915_WRITE(DSPSIZE(plane),
4719 ((mode->vdisplay - 1) << 16) |
4720 (mode->hdisplay - 1));
4721 I915_WRITE(DSPPOS(plane), 0);
4723 I915_WRITE(PIPECONF(pipe), pipeconf);
4724 POSTING_READ(PIPECONF(pipe));
4725 intel_enable_pipe(dev_priv, pipe, false);
4727 intel_wait_for_vblank(dev, pipe);
4729 I915_WRITE(DSPCNTR(plane), dspcntr);
4730 POSTING_READ(DSPCNTR(plane));
4732 ret = intel_pipe_set_base(crtc, x, y, fb);
4734 intel_update_watermarks(dev);
4740 * Initialize reference clocks when the driver loads
4742 void ironlake_init_pch_refclk(struct drm_device *dev)
4744 struct drm_i915_private *dev_priv = dev->dev_private;
4745 struct drm_mode_config *mode_config = &dev->mode_config;
4746 struct intel_encoder *encoder;
4748 bool has_lvds = false;
4749 bool has_cpu_edp = false;
4750 bool has_pch_edp = false;
4751 bool has_panel = false;
4752 bool has_ck505 = false;
4753 bool can_ssc = false;
4755 /* We need to take the global config into account */
4756 list_for_each_entry(encoder, &mode_config->encoder_list,
4758 switch (encoder->type) {
4759 case INTEL_OUTPUT_LVDS:
4763 case INTEL_OUTPUT_EDP:
4765 if (intel_encoder_is_pch_edp(&encoder->base))
4773 if (HAS_PCH_IBX(dev)) {
4774 has_ck505 = dev_priv->display_clock_mode;
4775 can_ssc = has_ck505;
4781 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
4782 has_panel, has_lvds, has_pch_edp, has_cpu_edp,
4785 /* Ironlake: try to setup display ref clock before DPLL
4786 * enabling. This is only under driver's control after
4787 * PCH B stepping, previous chipset stepping should be
4788 * ignoring this setting.
4790 temp = I915_READ(PCH_DREF_CONTROL);
4791 /* Always enable nonspread source */
4792 temp &= ~DREF_NONSPREAD_SOURCE_MASK;
4795 temp |= DREF_NONSPREAD_CK505_ENABLE;
4797 temp |= DREF_NONSPREAD_SOURCE_ENABLE;
4800 temp &= ~DREF_SSC_SOURCE_MASK;
4801 temp |= DREF_SSC_SOURCE_ENABLE;
4803 /* SSC must be turned on before enabling the CPU output */
4804 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
4805 DRM_DEBUG_KMS("Using SSC on panel\n");
4806 temp |= DREF_SSC1_ENABLE;
4808 temp &= ~DREF_SSC1_ENABLE;
4810 /* Get SSC going before enabling the outputs */
4811 I915_WRITE(PCH_DREF_CONTROL, temp);
4812 POSTING_READ(PCH_DREF_CONTROL);
4815 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4817 /* Enable CPU source on CPU attached eDP */
4819 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
4820 DRM_DEBUG_KMS("Using SSC on eDP\n");
4821 temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
4824 temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
4826 temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4828 I915_WRITE(PCH_DREF_CONTROL, temp);
4829 POSTING_READ(PCH_DREF_CONTROL);
4832 DRM_DEBUG_KMS("Disabling SSC entirely\n");
4834 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4836 /* Turn off CPU output */
4837 temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4839 I915_WRITE(PCH_DREF_CONTROL, temp);
4840 POSTING_READ(PCH_DREF_CONTROL);
4843 /* Turn off the SSC source */
4844 temp &= ~DREF_SSC_SOURCE_MASK;
4845 temp |= DREF_SSC_SOURCE_DISABLE;
4848 temp &= ~ DREF_SSC1_ENABLE;
4850 I915_WRITE(PCH_DREF_CONTROL, temp);
4851 POSTING_READ(PCH_DREF_CONTROL);
4856 static int ironlake_get_refclk(struct drm_crtc *crtc)
4858 struct drm_device *dev = crtc->dev;
4859 struct drm_i915_private *dev_priv = dev->dev_private;
4860 struct intel_encoder *encoder;
4861 struct intel_encoder *edp_encoder = NULL;
4862 int num_connectors = 0;
4863 bool is_lvds = false;
4865 for_each_encoder_on_crtc(dev, crtc, encoder) {
4866 switch (encoder->type) {
4867 case INTEL_OUTPUT_LVDS:
4870 case INTEL_OUTPUT_EDP:
4871 edp_encoder = encoder;
4877 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
4878 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
4879 dev_priv->lvds_ssc_freq);
4880 return dev_priv->lvds_ssc_freq * 1000;
4886 static void ironlake_set_pipeconf(struct drm_crtc *crtc,
4887 struct drm_display_mode *adjusted_mode,
4890 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
4891 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4892 int pipe = intel_crtc->pipe;
4895 val = I915_READ(PIPECONF(pipe));
4897 val &= ~PIPE_BPC_MASK;
4898 switch (intel_crtc->bpp) {
4912 /* Case prevented by intel_choose_pipe_bpp_dither. */
4916 val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
4918 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
4920 val &= ~PIPECONF_INTERLACE_MASK;
4921 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
4922 val |= PIPECONF_INTERLACED_ILK;
4924 val |= PIPECONF_PROGRESSIVE;
4926 I915_WRITE(PIPECONF(pipe), val);
4927 POSTING_READ(PIPECONF(pipe));
4930 static void haswell_set_pipeconf(struct drm_crtc *crtc,
4931 struct drm_display_mode *adjusted_mode,
4934 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
4935 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4936 enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
4939 val = I915_READ(PIPECONF(cpu_transcoder));
4941 val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
4943 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
4945 val &= ~PIPECONF_INTERLACE_MASK_HSW;
4946 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
4947 val |= PIPECONF_INTERLACED_ILK;
4949 val |= PIPECONF_PROGRESSIVE;
4951 I915_WRITE(PIPECONF(cpu_transcoder), val);
4952 POSTING_READ(PIPECONF(cpu_transcoder));
4955 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
4956 struct drm_display_mode *adjusted_mode,
4957 intel_clock_t *clock,
4958 bool *has_reduced_clock,
4959 intel_clock_t *reduced_clock)
4961 struct drm_device *dev = crtc->dev;
4962 struct drm_i915_private *dev_priv = dev->dev_private;
4963 struct intel_encoder *intel_encoder;
4965 const intel_limit_t *limit;
4966 bool ret, is_sdvo = false, is_tv = false, is_lvds = false;
4968 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
4969 switch (intel_encoder->type) {
4970 case INTEL_OUTPUT_LVDS:
4973 case INTEL_OUTPUT_SDVO:
4974 case INTEL_OUTPUT_HDMI:
4976 if (intel_encoder->needs_tv_clock)
4979 case INTEL_OUTPUT_TVOUT:
4985 refclk = ironlake_get_refclk(crtc);
4988 * Returns a set of divisors for the desired target clock with the given
4989 * refclk, or FALSE. The returned values represent the clock equation:
4990 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
4992 limit = intel_limit(crtc, refclk);
4993 ret = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
4998 if (is_lvds && dev_priv->lvds_downclock_avail) {
5000 * Ensure we match the reduced clock's P to the target clock.
5001 * If the clocks don't match, we can't switch the display clock
5002 * by using the FP0/FP1. In such case we will disable the LVDS
5003 * downclock feature.
5005 *has_reduced_clock = limit->find_pll(limit, crtc,
5006 dev_priv->lvds_downclock,
5012 if (is_sdvo && is_tv)
5013 i9xx_adjust_sdvo_tv_clock(adjusted_mode, clock);
5018 static void ironlake_set_m_n(struct drm_crtc *crtc,
5019 struct drm_display_mode *mode,
5020 struct drm_display_mode *adjusted_mode)
5022 struct drm_device *dev = crtc->dev;
5023 struct drm_i915_private *dev_priv = dev->dev_private;
5024 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5025 enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
5026 struct intel_encoder *intel_encoder, *edp_encoder = NULL;
5027 struct fdi_m_n m_n = {0};
5028 int target_clock, pixel_multiplier, lane, link_bw;
5029 bool is_dp = false, is_cpu_edp = false;
5031 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
5032 switch (intel_encoder->type) {
5033 case INTEL_OUTPUT_DISPLAYPORT:
5036 case INTEL_OUTPUT_EDP:
5038 if (!intel_encoder_is_pch_edp(&intel_encoder->base))
5040 edp_encoder = intel_encoder;
5046 pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
5048 /* CPU eDP doesn't require FDI link, so just set DP M/N
5049 according to current link config */
5051 intel_edp_link_config(edp_encoder, &lane, &link_bw);
5053 /* FDI is a binary signal running at ~2.7GHz, encoding
5054 * each output octet as 10 bits. The actual frequency
5055 * is stored as a divider into a 100MHz clock, and the
5056 * mode pixel clock is stored in units of 1KHz.
5057 * Hence the bw of each lane in terms of the mode signal
5060 link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
5063 /* [e]DP over FDI requires target mode clock instead of link clock. */
5065 target_clock = intel_edp_target_clock(edp_encoder, mode);
5067 target_clock = mode->clock;
5069 target_clock = adjusted_mode->clock;
5073 * Account for spread spectrum to avoid
5074 * oversubscribing the link. Max center spread
5075 * is 2.5%; use 5% for safety's sake.
5077 u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
5078 lane = bps / (link_bw * 8) + 1;
5081 intel_crtc->fdi_lanes = lane;
5083 if (pixel_multiplier > 1)
5084 link_bw *= pixel_multiplier;
5085 ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
5088 I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m);
5089 I915_WRITE(PIPE_DATA_N1(cpu_transcoder), m_n.gmch_n);
5090 I915_WRITE(PIPE_LINK_M1(cpu_transcoder), m_n.link_m);
5091 I915_WRITE(PIPE_LINK_N1(cpu_transcoder), m_n.link_n);
5094 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
5095 struct drm_display_mode *adjusted_mode,
5096 intel_clock_t *clock, u32 fp)
5098 struct drm_crtc *crtc = &intel_crtc->base;
5099 struct drm_device *dev = crtc->dev;
5100 struct drm_i915_private *dev_priv = dev->dev_private;
5101 struct intel_encoder *intel_encoder;
5103 int factor, pixel_multiplier, num_connectors = 0;
5104 bool is_lvds = false, is_sdvo = false, is_tv = false;
5105 bool is_dp = false, is_cpu_edp = false;
5107 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
5108 switch (intel_encoder->type) {
5109 case INTEL_OUTPUT_LVDS:
5112 case INTEL_OUTPUT_SDVO:
5113 case INTEL_OUTPUT_HDMI:
5115 if (intel_encoder->needs_tv_clock)
5118 case INTEL_OUTPUT_TVOUT:
5121 case INTEL_OUTPUT_DISPLAYPORT:
5124 case INTEL_OUTPUT_EDP:
5126 if (!intel_encoder_is_pch_edp(&intel_encoder->base))
5134 /* Enable autotuning of the PLL clock (if permissible) */
5137 if ((intel_panel_use_ssc(dev_priv) &&
5138 dev_priv->lvds_ssc_freq == 100) ||
5139 (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
5141 } else if (is_sdvo && is_tv)
5144 if (clock->m < factor * clock->n)
5150 dpll |= DPLLB_MODE_LVDS;
5152 dpll |= DPLLB_MODE_DAC_SERIAL;
5154 pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
5155 if (pixel_multiplier > 1) {
5156 dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
5158 dpll |= DPLL_DVO_HIGH_SPEED;
5160 if (is_dp && !is_cpu_edp)
5161 dpll |= DPLL_DVO_HIGH_SPEED;
5163 /* compute bitmask from p1 value */
5164 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5166 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
5168 switch (clock->p2) {
5170 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
5173 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
5176 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
5179 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
5183 if (is_sdvo && is_tv)
5184 dpll |= PLL_REF_INPUT_TVCLKINBC;
5186 /* XXX: just matching BIOS for now */
5187 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
5189 else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5190 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5192 dpll |= PLL_REF_INPUT_DREFCLK;
5197 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
5198 struct drm_display_mode *mode,
5199 struct drm_display_mode *adjusted_mode,
5201 struct drm_framebuffer *fb)
5203 struct drm_device *dev = crtc->dev;
5204 struct drm_i915_private *dev_priv = dev->dev_private;
5205 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5206 int pipe = intel_crtc->pipe;
5207 int plane = intel_crtc->plane;
5208 int num_connectors = 0;
5209 intel_clock_t clock, reduced_clock;
5210 u32 dpll, fp = 0, fp2 = 0;
5211 bool ok, has_reduced_clock = false;
5212 bool is_lvds = false, is_dp = false, is_cpu_edp = false;
5213 struct intel_encoder *encoder;
5218 for_each_encoder_on_crtc(dev, crtc, encoder) {
5219 switch (encoder->type) {
5220 case INTEL_OUTPUT_LVDS:
5223 case INTEL_OUTPUT_DISPLAYPORT:
5226 case INTEL_OUTPUT_EDP:
5228 if (!intel_encoder_is_pch_edp(&encoder->base))
5236 WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
5237 "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
5239 ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
5240 &has_reduced_clock, &reduced_clock);
5242 DRM_ERROR("Couldn't find PLL settings for mode!\n");
5246 /* Ensure that the cursor is valid for the new mode before changing... */
5247 intel_crtc_update_cursor(crtc, true);
5249 /* determine panel color depth */
5250 dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp,
5252 if (is_lvds && dev_priv->lvds_dither)
5255 fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
5256 if (has_reduced_clock)
5257 fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
5260 dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
5262 DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
5263 drm_mode_debug_printmodeline(mode);
5265 /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
5267 struct intel_pch_pll *pll;
5269 pll = intel_get_pch_pll(intel_crtc, dpll, fp);
5271 DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
5276 intel_put_pch_pll(intel_crtc);
5278 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
5279 * This is an exception to the general rule that mode_set doesn't turn
5283 temp = I915_READ(PCH_LVDS);
5284 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
5285 if (HAS_PCH_CPT(dev)) {
5286 temp &= ~PORT_TRANS_SEL_MASK;
5287 temp |= PORT_TRANS_SEL_CPT(pipe);
5290 temp |= LVDS_PIPEB_SELECT;
5292 temp &= ~LVDS_PIPEB_SELECT;
5295 /* set the corresponsding LVDS_BORDER bit */
5296 temp |= dev_priv->lvds_border_bits;
5297 /* Set the B0-B3 data pairs corresponding to whether we're going to
5298 * set the DPLLs for dual-channel mode or not.
5301 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
5303 temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
5305 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
5306 * appropriately here, but we need to look more thoroughly into how
5307 * panels behave in the two modes.
5309 temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
5310 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
5311 temp |= LVDS_HSYNC_POLARITY;
5312 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
5313 temp |= LVDS_VSYNC_POLARITY;
5314 I915_WRITE(PCH_LVDS, temp);
5317 if (is_dp && !is_cpu_edp) {
5318 intel_dp_set_m_n(crtc, mode, adjusted_mode);
5320 /* For non-DP output, clear any trans DP clock recovery setting.*/
5321 I915_WRITE(TRANSDATA_M1(pipe), 0);
5322 I915_WRITE(TRANSDATA_N1(pipe), 0);
5323 I915_WRITE(TRANSDPLINK_M1(pipe), 0);
5324 I915_WRITE(TRANSDPLINK_N1(pipe), 0);
5327 if (intel_crtc->pch_pll) {
5328 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
5330 /* Wait for the clocks to stabilize. */
5331 POSTING_READ(intel_crtc->pch_pll->pll_reg);
5334 /* The pixel multiplier can only be updated once the
5335 * DPLL is enabled and the clocks are stable.
5337 * So write it again.
5339 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
5342 intel_crtc->lowfreq_avail = false;
5343 if (intel_crtc->pch_pll) {
5344 if (is_lvds && has_reduced_clock && i915_powersave) {
5345 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
5346 intel_crtc->lowfreq_avail = true;
5348 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
5352 intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
5354 ironlake_set_m_n(crtc, mode, adjusted_mode);
5357 ironlake_set_pll_edp(crtc, adjusted_mode->clock);
5359 ironlake_set_pipeconf(crtc, adjusted_mode, dither);
5361 intel_wait_for_vblank(dev, pipe);
5363 /* Set up the display plane register */
5364 I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
5365 POSTING_READ(DSPCNTR(plane));
5367 ret = intel_pipe_set_base(crtc, x, y, fb);
5369 intel_update_watermarks(dev);
5371 intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
5376 static int haswell_crtc_mode_set(struct drm_crtc *crtc,
5377 struct drm_display_mode *mode,
5378 struct drm_display_mode *adjusted_mode,
5380 struct drm_framebuffer *fb)
5382 struct drm_device *dev = crtc->dev;
5383 struct drm_i915_private *dev_priv = dev->dev_private;
5384 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5385 int pipe = intel_crtc->pipe;
5386 int plane = intel_crtc->plane;
5387 int num_connectors = 0;
5388 intel_clock_t clock, reduced_clock;
5389 u32 dpll = 0, fp = 0, fp2 = 0;
5390 bool ok, has_reduced_clock = false;
5391 bool is_lvds = false, is_dp = false, is_cpu_edp = false;
5392 struct intel_encoder *encoder;
5397 for_each_encoder_on_crtc(dev, crtc, encoder) {
5398 switch (encoder->type) {
5399 case INTEL_OUTPUT_LVDS:
5402 case INTEL_OUTPUT_DISPLAYPORT:
5405 case INTEL_OUTPUT_EDP:
5407 if (!intel_encoder_is_pch_edp(&encoder->base))
5416 intel_crtc->cpu_transcoder = TRANSCODER_EDP;
5418 intel_crtc->cpu_transcoder = pipe;
5420 /* We are not sure yet this won't happen. */
5421 WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n",
5422 INTEL_PCH_TYPE(dev));
5424 WARN(num_connectors != 1, "%d connectors attached to pipe %c\n",
5425 num_connectors, pipe_name(pipe));
5427 WARN_ON(I915_READ(PIPECONF(intel_crtc->cpu_transcoder)) &
5428 (PIPECONF_ENABLE | I965_PIPECONF_ACTIVE));
5430 WARN_ON(I915_READ(DSPCNTR(plane)) & DISPLAY_PLANE_ENABLE);
5432 if (!intel_ddi_pll_mode_set(crtc, adjusted_mode->clock))
5435 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
5436 ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
5440 DRM_ERROR("Couldn't find PLL settings for mode!\n");
5445 /* Ensure that the cursor is valid for the new mode before changing... */
5446 intel_crtc_update_cursor(crtc, true);
5448 /* determine panel color depth */
5449 dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp,
5451 if (is_lvds && dev_priv->lvds_dither)
5454 DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
5455 drm_mode_debug_printmodeline(mode);
5457 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
5458 fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
5459 if (has_reduced_clock)
5460 fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
5463 dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock,
5466 /* CPU eDP is the only output that doesn't need a PCH PLL of its
5467 * own on pre-Haswell/LPT generation */
5469 struct intel_pch_pll *pll;
5471 pll = intel_get_pch_pll(intel_crtc, dpll, fp);
5473 DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
5478 intel_put_pch_pll(intel_crtc);
5480 /* The LVDS pin pair needs to be on before the DPLLs are
5481 * enabled. This is an exception to the general rule that
5482 * mode_set doesn't turn things on.
5485 temp = I915_READ(PCH_LVDS);
5486 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
5487 if (HAS_PCH_CPT(dev)) {
5488 temp &= ~PORT_TRANS_SEL_MASK;
5489 temp |= PORT_TRANS_SEL_CPT(pipe);
5492 temp |= LVDS_PIPEB_SELECT;
5494 temp &= ~LVDS_PIPEB_SELECT;
5497 /* set the corresponsding LVDS_BORDER bit */
5498 temp |= dev_priv->lvds_border_bits;
5499 /* Set the B0-B3 data pairs corresponding to whether
5500 * we're going to set the DPLLs for dual-channel mode or
5504 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
5506 temp &= ~(LVDS_B0B3_POWER_UP |
5507 LVDS_CLKB_POWER_UP);
5509 /* It would be nice to set 24 vs 18-bit mode
5510 * (LVDS_A3_POWER_UP) appropriately here, but we need to
5511 * look more thoroughly into how panels behave in the
5514 temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
5515 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
5516 temp |= LVDS_HSYNC_POLARITY;
5517 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
5518 temp |= LVDS_VSYNC_POLARITY;
5519 I915_WRITE(PCH_LVDS, temp);
5523 if (is_dp && !is_cpu_edp) {
5524 intel_dp_set_m_n(crtc, mode, adjusted_mode);
5526 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
5527 /* For non-DP output, clear any trans DP clock recovery
5529 I915_WRITE(TRANSDATA_M1(pipe), 0);
5530 I915_WRITE(TRANSDATA_N1(pipe), 0);
5531 I915_WRITE(TRANSDPLINK_M1(pipe), 0);
5532 I915_WRITE(TRANSDPLINK_N1(pipe), 0);
5536 intel_crtc->lowfreq_avail = false;
5537 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
5538 if (intel_crtc->pch_pll) {
5539 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
5541 /* Wait for the clocks to stabilize. */
5542 POSTING_READ(intel_crtc->pch_pll->pll_reg);
5545 /* The pixel multiplier can only be updated once the
5546 * DPLL is enabled and the clocks are stable.
5548 * So write it again.
5550 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
5553 if (intel_crtc->pch_pll) {
5554 if (is_lvds && has_reduced_clock && i915_powersave) {
5555 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
5556 intel_crtc->lowfreq_avail = true;
5558 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
5563 intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
5565 if (!is_dp || is_cpu_edp)
5566 ironlake_set_m_n(crtc, mode, adjusted_mode);
5568 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
5570 ironlake_set_pll_edp(crtc, adjusted_mode->clock);
5572 haswell_set_pipeconf(crtc, adjusted_mode, dither);
5574 /* Set up the display plane register */
5575 I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
5576 POSTING_READ(DSPCNTR(plane));
5578 ret = intel_pipe_set_base(crtc, x, y, fb);
5580 intel_update_watermarks(dev);
5582 intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
5587 static int intel_crtc_mode_set(struct drm_crtc *crtc,
5588 struct drm_display_mode *mode,
5589 struct drm_display_mode *adjusted_mode,
5591 struct drm_framebuffer *fb)
5593 struct drm_device *dev = crtc->dev;
5594 struct drm_i915_private *dev_priv = dev->dev_private;
5595 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5596 int pipe = intel_crtc->pipe;
5599 drm_vblank_pre_modeset(dev, pipe);
5601 ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
5603 drm_vblank_post_modeset(dev, pipe);
5608 static bool intel_eld_uptodate(struct drm_connector *connector,
5609 int reg_eldv, uint32_t bits_eldv,
5610 int reg_elda, uint32_t bits_elda,
5613 struct drm_i915_private *dev_priv = connector->dev->dev_private;
5614 uint8_t *eld = connector->eld;
5617 i = I915_READ(reg_eldv);
5626 i = I915_READ(reg_elda);
5628 I915_WRITE(reg_elda, i);
5630 for (i = 0; i < eld[2]; i++)
5631 if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
5637 static void g4x_write_eld(struct drm_connector *connector,
5638 struct drm_crtc *crtc)
5640 struct drm_i915_private *dev_priv = connector->dev->dev_private;
5641 uint8_t *eld = connector->eld;
5646 i = I915_READ(G4X_AUD_VID_DID);
5648 if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
5649 eldv = G4X_ELDV_DEVCL_DEVBLC;
5651 eldv = G4X_ELDV_DEVCTG;
5653 if (intel_eld_uptodate(connector,
5654 G4X_AUD_CNTL_ST, eldv,
5655 G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
5656 G4X_HDMIW_HDMIEDID))
5659 i = I915_READ(G4X_AUD_CNTL_ST);
5660 i &= ~(eldv | G4X_ELD_ADDR);
5661 len = (i >> 9) & 0x1f; /* ELD buffer size */
5662 I915_WRITE(G4X_AUD_CNTL_ST, i);
5667 len = min_t(uint8_t, eld[2], len);
5668 DRM_DEBUG_DRIVER("ELD size %d\n", len);
5669 for (i = 0; i < len; i++)
5670 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
5672 i = I915_READ(G4X_AUD_CNTL_ST);
5674 I915_WRITE(G4X_AUD_CNTL_ST, i);
5677 static void haswell_write_eld(struct drm_connector *connector,
5678 struct drm_crtc *crtc)
5680 struct drm_i915_private *dev_priv = connector->dev->dev_private;
5681 uint8_t *eld = connector->eld;
5682 struct drm_device *dev = crtc->dev;
5686 int pipe = to_intel_crtc(crtc)->pipe;
5689 int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
5690 int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe);
5691 int aud_config = HSW_AUD_CFG(pipe);
5692 int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
5695 DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n");
5697 /* Audio output enable */
5698 DRM_DEBUG_DRIVER("HDMI audio: enable codec\n");
5699 tmp = I915_READ(aud_cntrl_st2);
5700 tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
5701 I915_WRITE(aud_cntrl_st2, tmp);
5703 /* Wait for 1 vertical blank */
5704 intel_wait_for_vblank(dev, pipe);
5706 /* Set ELD valid state */
5707 tmp = I915_READ(aud_cntrl_st2);
5708 DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%8x\n", tmp);
5709 tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
5710 I915_WRITE(aud_cntrl_st2, tmp);
5711 tmp = I915_READ(aud_cntrl_st2);
5712 DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%8x\n", tmp);
5714 /* Enable HDMI mode */
5715 tmp = I915_READ(aud_config);
5716 DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%8x\n", tmp);
5717 /* clear N_programing_enable and N_value_index */
5718 tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
5719 I915_WRITE(aud_config, tmp);
5721 DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
5723 eldv = AUDIO_ELD_VALID_A << (pipe * 4);
5725 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
5726 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
5727 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
5728 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
5730 I915_WRITE(aud_config, 0);
5732 if (intel_eld_uptodate(connector,
5733 aud_cntrl_st2, eldv,
5734 aud_cntl_st, IBX_ELD_ADDRESS,
5738 i = I915_READ(aud_cntrl_st2);
5740 I915_WRITE(aud_cntrl_st2, i);
5745 i = I915_READ(aud_cntl_st);
5746 i &= ~IBX_ELD_ADDRESS;
5747 I915_WRITE(aud_cntl_st, i);
5748 i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */
5749 DRM_DEBUG_DRIVER("port num:%d\n", i);
5751 len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
5752 DRM_DEBUG_DRIVER("ELD size %d\n", len);
5753 for (i = 0; i < len; i++)
5754 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
5756 i = I915_READ(aud_cntrl_st2);
5758 I915_WRITE(aud_cntrl_st2, i);
5762 static void ironlake_write_eld(struct drm_connector *connector,
5763 struct drm_crtc *crtc)
5765 struct drm_i915_private *dev_priv = connector->dev->dev_private;
5766 uint8_t *eld = connector->eld;
5774 int pipe = to_intel_crtc(crtc)->pipe;
5776 if (HAS_PCH_IBX(connector->dev)) {
5777 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
5778 aud_config = IBX_AUD_CFG(pipe);
5779 aud_cntl_st = IBX_AUD_CNTL_ST(pipe);
5780 aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
5782 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe);
5783 aud_config = CPT_AUD_CFG(pipe);
5784 aud_cntl_st = CPT_AUD_CNTL_ST(pipe);
5785 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
5788 DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
5790 i = I915_READ(aud_cntl_st);
5791 i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */
5793 DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
5794 /* operate blindly on all ports */
5795 eldv = IBX_ELD_VALIDB;
5796 eldv |= IBX_ELD_VALIDB << 4;
5797 eldv |= IBX_ELD_VALIDB << 8;
5799 DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
5800 eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
5803 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
5804 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
5805 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
5806 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
5808 I915_WRITE(aud_config, 0);
5810 if (intel_eld_uptodate(connector,
5811 aud_cntrl_st2, eldv,
5812 aud_cntl_st, IBX_ELD_ADDRESS,
5816 i = I915_READ(aud_cntrl_st2);
5818 I915_WRITE(aud_cntrl_st2, i);
5823 i = I915_READ(aud_cntl_st);
5824 i &= ~IBX_ELD_ADDRESS;
5825 I915_WRITE(aud_cntl_st, i);
5827 len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
5828 DRM_DEBUG_DRIVER("ELD size %d\n", len);
5829 for (i = 0; i < len; i++)
5830 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
5832 i = I915_READ(aud_cntrl_st2);
5834 I915_WRITE(aud_cntrl_st2, i);
5837 void intel_write_eld(struct drm_encoder *encoder,
5838 struct drm_display_mode *mode)
5840 struct drm_crtc *crtc = encoder->crtc;
5841 struct drm_connector *connector;
5842 struct drm_device *dev = encoder->dev;
5843 struct drm_i915_private *dev_priv = dev->dev_private;
5845 connector = drm_select_eld(encoder, mode);
5849 DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
5851 drm_get_connector_name(connector),
5852 connector->encoder->base.id,
5853 drm_get_encoder_name(connector->encoder));
5855 connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
5857 if (dev_priv->display.write_eld)
5858 dev_priv->display.write_eld(connector, crtc);
5861 /** Loads the palette/gamma unit for the CRTC with the prepared values */
5862 void intel_crtc_load_lut(struct drm_crtc *crtc)
5864 struct drm_device *dev = crtc->dev;
5865 struct drm_i915_private *dev_priv = dev->dev_private;
5866 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5867 int palreg = PALETTE(intel_crtc->pipe);
5870 /* The clocks have to be on to load the palette. */
5871 if (!crtc->enabled || !intel_crtc->active)
5874 /* use legacy palette for Ironlake */
5875 if (HAS_PCH_SPLIT(dev))
5876 palreg = LGC_PALETTE(intel_crtc->pipe);
5878 for (i = 0; i < 256; i++) {
5879 I915_WRITE(palreg + 4 * i,
5880 (intel_crtc->lut_r[i] << 16) |
5881 (intel_crtc->lut_g[i] << 8) |
5882 intel_crtc->lut_b[i]);
5886 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
5888 struct drm_device *dev = crtc->dev;
5889 struct drm_i915_private *dev_priv = dev->dev_private;
5890 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5891 bool visible = base != 0;
5894 if (intel_crtc->cursor_visible == visible)
5897 cntl = I915_READ(_CURACNTR);
5899 /* On these chipsets we can only modify the base whilst
5900 * the cursor is disabled.
5902 I915_WRITE(_CURABASE, base);
5904 cntl &= ~(CURSOR_FORMAT_MASK);
5905 /* XXX width must be 64, stride 256 => 0x00 << 28 */
5906 cntl |= CURSOR_ENABLE |
5907 CURSOR_GAMMA_ENABLE |
5910 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
5911 I915_WRITE(_CURACNTR, cntl);
5913 intel_crtc->cursor_visible = visible;
5916 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
5918 struct drm_device *dev = crtc->dev;
5919 struct drm_i915_private *dev_priv = dev->dev_private;
5920 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5921 int pipe = intel_crtc->pipe;
5922 bool visible = base != 0;
5924 if (intel_crtc->cursor_visible != visible) {
5925 uint32_t cntl = I915_READ(CURCNTR(pipe));
5927 cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
5928 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
5929 cntl |= pipe << 28; /* Connect to correct pipe */
5931 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
5932 cntl |= CURSOR_MODE_DISABLE;
5934 I915_WRITE(CURCNTR(pipe), cntl);
5936 intel_crtc->cursor_visible = visible;
5938 /* and commit changes on next vblank */
5939 I915_WRITE(CURBASE(pipe), base);
5942 static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
5944 struct drm_device *dev = crtc->dev;
5945 struct drm_i915_private *dev_priv = dev->dev_private;
5946 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5947 int pipe = intel_crtc->pipe;
5948 bool visible = base != 0;
5950 if (intel_crtc->cursor_visible != visible) {
5951 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
5953 cntl &= ~CURSOR_MODE;
5954 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
5956 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
5957 cntl |= CURSOR_MODE_DISABLE;
5959 I915_WRITE(CURCNTR_IVB(pipe), cntl);
5961 intel_crtc->cursor_visible = visible;
5963 /* and commit changes on next vblank */
5964 I915_WRITE(CURBASE_IVB(pipe), base);
5967 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
5968 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
5971 struct drm_device *dev = crtc->dev;
5972 struct drm_i915_private *dev_priv = dev->dev_private;
5973 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5974 int pipe = intel_crtc->pipe;
5975 int x = intel_crtc->cursor_x;
5976 int y = intel_crtc->cursor_y;
5982 if (on && crtc->enabled && crtc->fb) {
5983 base = intel_crtc->cursor_addr;
5984 if (x > (int) crtc->fb->width)
5987 if (y > (int) crtc->fb->height)
5993 if (x + intel_crtc->cursor_width < 0)
5996 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
5999 pos |= x << CURSOR_X_SHIFT;
6002 if (y + intel_crtc->cursor_height < 0)
6005 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
6008 pos |= y << CURSOR_Y_SHIFT;
6010 visible = base != 0;
6011 if (!visible && !intel_crtc->cursor_visible)
6014 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
6015 I915_WRITE(CURPOS_IVB(pipe), pos);
6016 ivb_update_cursor(crtc, base);
6018 I915_WRITE(CURPOS(pipe), pos);
6019 if (IS_845G(dev) || IS_I865G(dev))
6020 i845_update_cursor(crtc, base);
6022 i9xx_update_cursor(crtc, base);
6026 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
6027 struct drm_file *file,
6029 uint32_t width, uint32_t height)
6031 struct drm_device *dev = crtc->dev;
6032 struct drm_i915_private *dev_priv = dev->dev_private;
6033 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6034 struct drm_i915_gem_object *obj;
6038 /* if we want to turn off the cursor ignore width and height */
6040 DRM_DEBUG_KMS("cursor off\n");
6043 mutex_lock(&dev->struct_mutex);
6047 /* Currently we only support 64x64 cursors */
6048 if (width != 64 || height != 64) {
6049 DRM_ERROR("we currently only support 64x64 cursors\n");
6053 obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
6054 if (&obj->base == NULL)
6057 if (obj->base.size < width * height * 4) {
6058 DRM_ERROR("buffer is to small\n");
6063 /* we only need to pin inside GTT if cursor is non-phy */
6064 mutex_lock(&dev->struct_mutex);
6065 if (!dev_priv->info->cursor_needs_physical) {
6066 if (obj->tiling_mode) {
6067 DRM_ERROR("cursor cannot be tiled\n");
6072 ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL);
6074 DRM_ERROR("failed to move cursor bo into the GTT\n");
6078 ret = i915_gem_object_put_fence(obj);
6080 DRM_ERROR("failed to release fence for cursor");
6084 addr = obj->gtt_offset;
6086 int align = IS_I830(dev) ? 16 * 1024 : 256;
6087 ret = i915_gem_attach_phys_object(dev, obj,
6088 (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
6091 DRM_ERROR("failed to attach phys object\n");
6094 addr = obj->phys_obj->handle->busaddr;
6098 I915_WRITE(CURSIZE, (height << 12) | width);
6101 if (intel_crtc->cursor_bo) {
6102 if (dev_priv->info->cursor_needs_physical) {
6103 if (intel_crtc->cursor_bo != obj)
6104 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
6106 i915_gem_object_unpin(intel_crtc->cursor_bo);
6107 drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
6110 mutex_unlock(&dev->struct_mutex);
6112 intel_crtc->cursor_addr = addr;
6113 intel_crtc->cursor_bo = obj;
6114 intel_crtc->cursor_width = width;
6115 intel_crtc->cursor_height = height;
6117 intel_crtc_update_cursor(crtc, true);
6121 i915_gem_object_unpin(obj);
6123 mutex_unlock(&dev->struct_mutex);
6125 drm_gem_object_unreference_unlocked(&obj->base);
6129 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
6131 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6133 intel_crtc->cursor_x = x;
6134 intel_crtc->cursor_y = y;
6136 intel_crtc_update_cursor(crtc, true);
6141 /** Sets the color ramps on behalf of RandR */
6142 void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
6143 u16 blue, int regno)
6145 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6147 intel_crtc->lut_r[regno] = red >> 8;
6148 intel_crtc->lut_g[regno] = green >> 8;
6149 intel_crtc->lut_b[regno] = blue >> 8;
6152 void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
6153 u16 *blue, int regno)
6155 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6157 *red = intel_crtc->lut_r[regno] << 8;
6158 *green = intel_crtc->lut_g[regno] << 8;
6159 *blue = intel_crtc->lut_b[regno] << 8;
6162 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
6163 u16 *blue, uint32_t start, uint32_t size)
6165 int end = (start + size > 256) ? 256 : start + size, i;
6166 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6168 for (i = start; i < end; i++) {
6169 intel_crtc->lut_r[i] = red[i] >> 8;
6170 intel_crtc->lut_g[i] = green[i] >> 8;
6171 intel_crtc->lut_b[i] = blue[i] >> 8;
6174 intel_crtc_load_lut(crtc);
6178 * Get a pipe with a simple mode set on it for doing load-based monitor
6181 * It will be up to the load-detect code to adjust the pipe as appropriate for
6182 * its requirements. The pipe will be connected to no other encoders.
6184 * Currently this code will only succeed if there is a pipe with no encoders
6185 * configured for it. In the future, it could choose to temporarily disable
6186 * some outputs to free up a pipe for its use.
6188 * \return crtc, or NULL if no pipes are available.
6191 /* VESA 640x480x72Hz mode to set on the pipe */
6192 static struct drm_display_mode load_detect_mode = {
6193 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
6194 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
6197 static struct drm_framebuffer *
6198 intel_framebuffer_create(struct drm_device *dev,
6199 struct drm_mode_fb_cmd2 *mode_cmd,
6200 struct drm_i915_gem_object *obj)
6202 struct intel_framebuffer *intel_fb;
6205 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
6207 drm_gem_object_unreference_unlocked(&obj->base);
6208 return ERR_PTR(-ENOMEM);
6211 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
6213 drm_gem_object_unreference_unlocked(&obj->base);
6215 return ERR_PTR(ret);
6218 return &intel_fb->base;
6222 intel_framebuffer_pitch_for_width(int width, int bpp)
6224 u32 pitch = DIV_ROUND_UP(width * bpp, 8);
6225 return ALIGN(pitch, 64);
6229 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
6231 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
6232 return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
6235 static struct drm_framebuffer *
6236 intel_framebuffer_create_for_mode(struct drm_device *dev,
6237 struct drm_display_mode *mode,
6240 struct drm_i915_gem_object *obj;
6241 struct drm_mode_fb_cmd2 mode_cmd;
6243 obj = i915_gem_alloc_object(dev,
6244 intel_framebuffer_size_for_mode(mode, bpp));
6246 return ERR_PTR(-ENOMEM);
6248 mode_cmd.width = mode->hdisplay;
6249 mode_cmd.height = mode->vdisplay;
6250 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
6252 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
6254 return intel_framebuffer_create(dev, &mode_cmd, obj);
6257 static struct drm_framebuffer *
6258 mode_fits_in_fbdev(struct drm_device *dev,
6259 struct drm_display_mode *mode)
6261 struct drm_i915_private *dev_priv = dev->dev_private;
6262 struct drm_i915_gem_object *obj;
6263 struct drm_framebuffer *fb;
6265 if (dev_priv->fbdev == NULL)
6268 obj = dev_priv->fbdev->ifb.obj;
6272 fb = &dev_priv->fbdev->ifb.base;
6273 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
6274 fb->bits_per_pixel))
6277 if (obj->base.size < mode->vdisplay * fb->pitches[0])
6283 bool intel_get_load_detect_pipe(struct drm_connector *connector,
6284 struct drm_display_mode *mode,
6285 struct intel_load_detect_pipe *old)
6287 struct intel_crtc *intel_crtc;
6288 struct intel_encoder *intel_encoder =
6289 intel_attached_encoder(connector);
6290 struct drm_crtc *possible_crtc;
6291 struct drm_encoder *encoder = &intel_encoder->base;
6292 struct drm_crtc *crtc = NULL;
6293 struct drm_device *dev = encoder->dev;
6294 struct drm_framebuffer *fb;
6297 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6298 connector->base.id, drm_get_connector_name(connector),
6299 encoder->base.id, drm_get_encoder_name(encoder));
6302 * Algorithm gets a little messy:
6304 * - if the connector already has an assigned crtc, use it (but make
6305 * sure it's on first)
6307 * - try to find the first unused crtc that can drive this connector,
6308 * and use that if we find one
6311 /* See if we already have a CRTC for this connector */
6312 if (encoder->crtc) {
6313 crtc = encoder->crtc;
6315 old->dpms_mode = connector->dpms;
6316 old->load_detect_temp = false;
6318 /* Make sure the crtc and connector are running */
6319 if (connector->dpms != DRM_MODE_DPMS_ON)
6320 connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
6325 /* Find an unused one (if possible) */
6326 list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
6328 if (!(encoder->possible_crtcs & (1 << i)))
6330 if (!possible_crtc->enabled) {
6331 crtc = possible_crtc;
6337 * If we didn't find an unused CRTC, don't use any.
6340 DRM_DEBUG_KMS("no pipe available for load-detect\n");
6344 intel_encoder->new_crtc = to_intel_crtc(crtc);
6345 to_intel_connector(connector)->new_encoder = intel_encoder;
6347 intel_crtc = to_intel_crtc(crtc);
6348 old->dpms_mode = connector->dpms;
6349 old->load_detect_temp = true;
6350 old->release_fb = NULL;
6353 mode = &load_detect_mode;
6355 /* We need a framebuffer large enough to accommodate all accesses
6356 * that the plane may generate whilst we perform load detection.
6357 * We can not rely on the fbcon either being present (we get called
6358 * during its initialisation to detect all boot displays, or it may
6359 * not even exist) or that it is large enough to satisfy the
6362 fb = mode_fits_in_fbdev(dev, mode);
6364 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
6365 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
6366 old->release_fb = fb;
6368 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
6370 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
6374 if (!intel_set_mode(crtc, mode, 0, 0, fb)) {
6375 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
6376 if (old->release_fb)
6377 old->release_fb->funcs->destroy(old->release_fb);
6381 /* let the connector get through one full cycle before testing */
6382 intel_wait_for_vblank(dev, intel_crtc->pipe);
6386 connector->encoder = NULL;
6387 encoder->crtc = NULL;
6391 void intel_release_load_detect_pipe(struct drm_connector *connector,
6392 struct intel_load_detect_pipe *old)
6394 struct intel_encoder *intel_encoder =
6395 intel_attached_encoder(connector);
6396 struct drm_encoder *encoder = &intel_encoder->base;
6398 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6399 connector->base.id, drm_get_connector_name(connector),
6400 encoder->base.id, drm_get_encoder_name(encoder));
6402 if (old->load_detect_temp) {
6403 struct drm_crtc *crtc = encoder->crtc;
6405 to_intel_connector(connector)->new_encoder = NULL;
6406 intel_encoder->new_crtc = NULL;
6407 intel_set_mode(crtc, NULL, 0, 0, NULL);
6409 if (old->release_fb)
6410 old->release_fb->funcs->destroy(old->release_fb);
6415 /* Switch crtc and encoder back off if necessary */
6416 if (old->dpms_mode != DRM_MODE_DPMS_ON)
6417 connector->funcs->dpms(connector, old->dpms_mode);
6420 /* Returns the clock of the currently programmed mode of the given pipe. */
6421 static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
6423 struct drm_i915_private *dev_priv = dev->dev_private;
6424 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6425 int pipe = intel_crtc->pipe;
6426 u32 dpll = I915_READ(DPLL(pipe));
6428 intel_clock_t clock;
6430 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
6431 fp = I915_READ(FP0(pipe));
6433 fp = I915_READ(FP1(pipe));
6435 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
6436 if (IS_PINEVIEW(dev)) {
6437 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
6438 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
6440 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
6441 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
6444 if (!IS_GEN2(dev)) {
6445 if (IS_PINEVIEW(dev))
6446 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
6447 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
6449 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
6450 DPLL_FPA01_P1_POST_DIV_SHIFT);
6452 switch (dpll & DPLL_MODE_MASK) {
6453 case DPLLB_MODE_DAC_SERIAL:
6454 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
6457 case DPLLB_MODE_LVDS:
6458 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
6462 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
6463 "mode\n", (int)(dpll & DPLL_MODE_MASK));
6467 /* XXX: Handle the 100Mhz refclk */
6468 intel_clock(dev, 96000, &clock);
6470 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
6473 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
6474 DPLL_FPA01_P1_POST_DIV_SHIFT);
6477 if ((dpll & PLL_REF_INPUT_MASK) ==
6478 PLLB_REF_INPUT_SPREADSPECTRUMIN) {
6479 /* XXX: might not be 66MHz */
6480 intel_clock(dev, 66000, &clock);
6482 intel_clock(dev, 48000, &clock);
6484 if (dpll & PLL_P1_DIVIDE_BY_TWO)
6487 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
6488 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
6490 if (dpll & PLL_P2_DIVIDE_BY_4)
6495 intel_clock(dev, 48000, &clock);
6499 /* XXX: It would be nice to validate the clocks, but we can't reuse
6500 * i830PllIsValid() because it relies on the xf86_config connector
6501 * configuration being accurate, which it isn't necessarily.
6507 /** Returns the currently programmed mode of the given pipe. */
6508 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
6509 struct drm_crtc *crtc)
6511 struct drm_i915_private *dev_priv = dev->dev_private;
6512 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6513 enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
6514 struct drm_display_mode *mode;
6515 int htot = I915_READ(HTOTAL(cpu_transcoder));
6516 int hsync = I915_READ(HSYNC(cpu_transcoder));
6517 int vtot = I915_READ(VTOTAL(cpu_transcoder));
6518 int vsync = I915_READ(VSYNC(cpu_transcoder));
6520 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
6524 mode->clock = intel_crtc_clock_get(dev, crtc);
6525 mode->hdisplay = (htot & 0xffff) + 1;
6526 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
6527 mode->hsync_start = (hsync & 0xffff) + 1;
6528 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
6529 mode->vdisplay = (vtot & 0xffff) + 1;
6530 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
6531 mode->vsync_start = (vsync & 0xffff) + 1;
6532 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
6534 drm_mode_set_name(mode);
6539 static void intel_increase_pllclock(struct drm_crtc *crtc)
6541 struct drm_device *dev = crtc->dev;
6542 drm_i915_private_t *dev_priv = dev->dev_private;
6543 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6544 int pipe = intel_crtc->pipe;
6545 int dpll_reg = DPLL(pipe);
6548 if (HAS_PCH_SPLIT(dev))
6551 if (!dev_priv->lvds_downclock_avail)
6554 dpll = I915_READ(dpll_reg);
6555 if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
6556 DRM_DEBUG_DRIVER("upclocking LVDS\n");
6558 assert_panel_unlocked(dev_priv, pipe);
6560 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
6561 I915_WRITE(dpll_reg, dpll);
6562 intel_wait_for_vblank(dev, pipe);
6564 dpll = I915_READ(dpll_reg);
6565 if (dpll & DISPLAY_RATE_SELECT_FPA1)
6566 DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
6570 static void intel_decrease_pllclock(struct drm_crtc *crtc)
6572 struct drm_device *dev = crtc->dev;
6573 drm_i915_private_t *dev_priv = dev->dev_private;
6574 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6576 if (HAS_PCH_SPLIT(dev))
6579 if (!dev_priv->lvds_downclock_avail)
6583 * Since this is called by a timer, we should never get here in
6586 if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
6587 int pipe = intel_crtc->pipe;
6588 int dpll_reg = DPLL(pipe);
6591 DRM_DEBUG_DRIVER("downclocking LVDS\n");
6593 assert_panel_unlocked(dev_priv, pipe);
6595 dpll = I915_READ(dpll_reg);
6596 dpll |= DISPLAY_RATE_SELECT_FPA1;
6597 I915_WRITE(dpll_reg, dpll);
6598 intel_wait_for_vblank(dev, pipe);
6599 dpll = I915_READ(dpll_reg);
6600 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
6601 DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
6606 void intel_mark_busy(struct drm_device *dev)
6608 i915_update_gfx_val(dev->dev_private);
6611 void intel_mark_idle(struct drm_device *dev)
6615 void intel_mark_fb_busy(struct drm_i915_gem_object *obj)
6617 struct drm_device *dev = obj->base.dev;
6618 struct drm_crtc *crtc;
6620 if (!i915_powersave)
6623 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
6627 if (to_intel_framebuffer(crtc->fb)->obj == obj)
6628 intel_increase_pllclock(crtc);
6632 void intel_mark_fb_idle(struct drm_i915_gem_object *obj)
6634 struct drm_device *dev = obj->base.dev;
6635 struct drm_crtc *crtc;
6637 if (!i915_powersave)
6640 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
6644 if (to_intel_framebuffer(crtc->fb)->obj == obj)
6645 intel_decrease_pllclock(crtc);
6649 static void intel_crtc_destroy(struct drm_crtc *crtc)
6651 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6652 struct drm_device *dev = crtc->dev;
6653 struct intel_unpin_work *work;
6654 unsigned long flags;
6656 spin_lock_irqsave(&dev->event_lock, flags);
6657 work = intel_crtc->unpin_work;
6658 intel_crtc->unpin_work = NULL;
6659 spin_unlock_irqrestore(&dev->event_lock, flags);
6662 cancel_work_sync(&work->work);
6666 drm_crtc_cleanup(crtc);
6671 static void intel_unpin_work_fn(struct work_struct *__work)
6673 struct intel_unpin_work *work =
6674 container_of(__work, struct intel_unpin_work, work);
6676 mutex_lock(&work->dev->struct_mutex);
6677 intel_unpin_fb_obj(work->old_fb_obj);
6678 drm_gem_object_unreference(&work->pending_flip_obj->base);
6679 drm_gem_object_unreference(&work->old_fb_obj->base);
6681 intel_update_fbc(work->dev);
6682 mutex_unlock(&work->dev->struct_mutex);
6686 static void do_intel_finish_page_flip(struct drm_device *dev,
6687 struct drm_crtc *crtc)
6689 drm_i915_private_t *dev_priv = dev->dev_private;
6690 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6691 struct intel_unpin_work *work;
6692 struct drm_i915_gem_object *obj;
6693 struct drm_pending_vblank_event *e;
6694 struct timeval tvbl;
6695 unsigned long flags;
6697 /* Ignore early vblank irqs */
6698 if (intel_crtc == NULL)
6701 spin_lock_irqsave(&dev->event_lock, flags);
6702 work = intel_crtc->unpin_work;
6703 if (work == NULL || !work->pending) {
6704 spin_unlock_irqrestore(&dev->event_lock, flags);
6708 intel_crtc->unpin_work = NULL;
6712 e->event.sequence = drm_vblank_count_and_time(dev, intel_crtc->pipe, &tvbl);
6714 e->event.tv_sec = tvbl.tv_sec;
6715 e->event.tv_usec = tvbl.tv_usec;
6717 list_add_tail(&e->base.link,
6718 &e->base.file_priv->event_list);
6719 wake_up_interruptible(&e->base.file_priv->event_wait);
6722 drm_vblank_put(dev, intel_crtc->pipe);
6724 spin_unlock_irqrestore(&dev->event_lock, flags);
6726 obj = work->old_fb_obj;
6728 atomic_clear_mask(1 << intel_crtc->plane,
6729 &obj->pending_flip.counter);
6731 wake_up(&dev_priv->pending_flip_queue);
6732 schedule_work(&work->work);
6734 trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
6737 void intel_finish_page_flip(struct drm_device *dev, int pipe)
6739 drm_i915_private_t *dev_priv = dev->dev_private;
6740 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
6742 do_intel_finish_page_flip(dev, crtc);
6745 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
6747 drm_i915_private_t *dev_priv = dev->dev_private;
6748 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
6750 do_intel_finish_page_flip(dev, crtc);
6753 void intel_prepare_page_flip(struct drm_device *dev, int plane)
6755 drm_i915_private_t *dev_priv = dev->dev_private;
6756 struct intel_crtc *intel_crtc =
6757 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
6758 unsigned long flags;
6760 spin_lock_irqsave(&dev->event_lock, flags);
6761 if (intel_crtc->unpin_work) {
6762 if ((++intel_crtc->unpin_work->pending) > 1)
6763 DRM_ERROR("Prepared flip multiple times\n");
6765 DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
6767 spin_unlock_irqrestore(&dev->event_lock, flags);
6770 static int intel_gen2_queue_flip(struct drm_device *dev,
6771 struct drm_crtc *crtc,
6772 struct drm_framebuffer *fb,
6773 struct drm_i915_gem_object *obj)
6775 struct drm_i915_private *dev_priv = dev->dev_private;
6776 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6778 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
6781 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6785 ret = intel_ring_begin(ring, 6);
6789 /* Can't queue multiple flips, so wait for the previous
6790 * one to finish before executing the next.
6792 if (intel_crtc->plane)
6793 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
6795 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
6796 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
6797 intel_ring_emit(ring, MI_NOOP);
6798 intel_ring_emit(ring, MI_DISPLAY_FLIP |
6799 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6800 intel_ring_emit(ring, fb->pitches[0]);
6801 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
6802 intel_ring_emit(ring, 0); /* aux display base address, unused */
6803 intel_ring_advance(ring);
6807 intel_unpin_fb_obj(obj);
6812 static int intel_gen3_queue_flip(struct drm_device *dev,
6813 struct drm_crtc *crtc,
6814 struct drm_framebuffer *fb,
6815 struct drm_i915_gem_object *obj)
6817 struct drm_i915_private *dev_priv = dev->dev_private;
6818 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6820 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
6823 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6827 ret = intel_ring_begin(ring, 6);
6831 if (intel_crtc->plane)
6832 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
6834 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
6835 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
6836 intel_ring_emit(ring, MI_NOOP);
6837 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
6838 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6839 intel_ring_emit(ring, fb->pitches[0]);
6840 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
6841 intel_ring_emit(ring, MI_NOOP);
6843 intel_ring_advance(ring);
6847 intel_unpin_fb_obj(obj);
6852 static int intel_gen4_queue_flip(struct drm_device *dev,
6853 struct drm_crtc *crtc,
6854 struct drm_framebuffer *fb,
6855 struct drm_i915_gem_object *obj)
6857 struct drm_i915_private *dev_priv = dev->dev_private;
6858 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6859 uint32_t pf, pipesrc;
6860 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
6863 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6867 ret = intel_ring_begin(ring, 4);
6871 /* i965+ uses the linear or tiled offsets from the
6872 * Display Registers (which do not change across a page-flip)
6873 * so we need only reprogram the base address.
6875 intel_ring_emit(ring, MI_DISPLAY_FLIP |
6876 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6877 intel_ring_emit(ring, fb->pitches[0]);
6878 intel_ring_emit(ring,
6879 (obj->gtt_offset + intel_crtc->dspaddr_offset) |
6882 /* XXX Enabling the panel-fitter across page-flip is so far
6883 * untested on non-native modes, so ignore it for now.
6884 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
6887 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
6888 intel_ring_emit(ring, pf | pipesrc);
6889 intel_ring_advance(ring);
6893 intel_unpin_fb_obj(obj);
6898 static int intel_gen6_queue_flip(struct drm_device *dev,
6899 struct drm_crtc *crtc,
6900 struct drm_framebuffer *fb,
6901 struct drm_i915_gem_object *obj)
6903 struct drm_i915_private *dev_priv = dev->dev_private;
6904 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6905 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
6906 uint32_t pf, pipesrc;
6909 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6913 ret = intel_ring_begin(ring, 4);
6917 intel_ring_emit(ring, MI_DISPLAY_FLIP |
6918 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6919 intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
6920 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
6922 /* Contrary to the suggestions in the documentation,
6923 * "Enable Panel Fitter" does not seem to be required when page
6924 * flipping with a non-native mode, and worse causes a normal
6926 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
6929 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
6930 intel_ring_emit(ring, pf | pipesrc);
6931 intel_ring_advance(ring);
6935 intel_unpin_fb_obj(obj);
6941 * On gen7 we currently use the blit ring because (in early silicon at least)
6942 * the render ring doesn't give us interrpts for page flip completion, which
6943 * means clients will hang after the first flip is queued. Fortunately the
6944 * blit ring generates interrupts properly, so use it instead.
6946 static int intel_gen7_queue_flip(struct drm_device *dev,
6947 struct drm_crtc *crtc,
6948 struct drm_framebuffer *fb,
6949 struct drm_i915_gem_object *obj)
6951 struct drm_i915_private *dev_priv = dev->dev_private;
6952 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6953 struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
6954 uint32_t plane_bit = 0;
6957 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6961 switch(intel_crtc->plane) {
6963 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
6966 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
6969 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
6972 WARN_ONCE(1, "unknown plane in flip command\n");
6977 ret = intel_ring_begin(ring, 4);
6981 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
6982 intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
6983 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
6984 intel_ring_emit(ring, (MI_NOOP));
6985 intel_ring_advance(ring);
6989 intel_unpin_fb_obj(obj);
6994 static int intel_default_queue_flip(struct drm_device *dev,
6995 struct drm_crtc *crtc,
6996 struct drm_framebuffer *fb,
6997 struct drm_i915_gem_object *obj)
7002 static int intel_crtc_page_flip(struct drm_crtc *crtc,
7003 struct drm_framebuffer *fb,
7004 struct drm_pending_vblank_event *event)
7006 struct drm_device *dev = crtc->dev;
7007 struct drm_i915_private *dev_priv = dev->dev_private;
7008 struct intel_framebuffer *intel_fb;
7009 struct drm_i915_gem_object *obj;
7010 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7011 struct intel_unpin_work *work;
7012 unsigned long flags;
7015 /* Can't change pixel format via MI display flips. */
7016 if (fb->pixel_format != crtc->fb->pixel_format)
7020 * TILEOFF/LINOFF registers can't be changed via MI display flips.
7021 * Note that pitch changes could also affect these register.
7023 if (INTEL_INFO(dev)->gen > 3 &&
7024 (fb->offsets[0] != crtc->fb->offsets[0] ||
7025 fb->pitches[0] != crtc->fb->pitches[0]))
7028 work = kzalloc(sizeof *work, GFP_KERNEL);
7032 work->event = event;
7033 work->dev = crtc->dev;
7034 intel_fb = to_intel_framebuffer(crtc->fb);
7035 work->old_fb_obj = intel_fb->obj;
7036 INIT_WORK(&work->work, intel_unpin_work_fn);
7038 ret = drm_vblank_get(dev, intel_crtc->pipe);
7042 /* We borrow the event spin lock for protecting unpin_work */
7043 spin_lock_irqsave(&dev->event_lock, flags);
7044 if (intel_crtc->unpin_work) {
7045 spin_unlock_irqrestore(&dev->event_lock, flags);
7047 drm_vblank_put(dev, intel_crtc->pipe);
7049 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
7052 intel_crtc->unpin_work = work;
7053 spin_unlock_irqrestore(&dev->event_lock, flags);
7055 intel_fb = to_intel_framebuffer(fb);
7056 obj = intel_fb->obj;
7058 ret = i915_mutex_lock_interruptible(dev);
7062 /* Reference the objects for the scheduled work. */
7063 drm_gem_object_reference(&work->old_fb_obj->base);
7064 drm_gem_object_reference(&obj->base);
7068 work->pending_flip_obj = obj;
7070 work->enable_stall_check = true;
7072 /* Block clients from rendering to the new back buffer until
7073 * the flip occurs and the object is no longer visible.
7075 atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
7077 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
7079 goto cleanup_pending;
7081 intel_disable_fbc(dev);
7082 intel_mark_fb_busy(obj);
7083 mutex_unlock(&dev->struct_mutex);
7085 trace_i915_flip_request(intel_crtc->plane, obj);
7090 atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
7091 drm_gem_object_unreference(&work->old_fb_obj->base);
7092 drm_gem_object_unreference(&obj->base);
7093 mutex_unlock(&dev->struct_mutex);
7096 spin_lock_irqsave(&dev->event_lock, flags);
7097 intel_crtc->unpin_work = NULL;
7098 spin_unlock_irqrestore(&dev->event_lock, flags);
7100 drm_vblank_put(dev, intel_crtc->pipe);
7107 static struct drm_crtc_helper_funcs intel_helper_funcs = {
7108 .mode_set_base_atomic = intel_pipe_set_base_atomic,
7109 .load_lut = intel_crtc_load_lut,
7110 .disable = intel_crtc_noop,
7113 bool intel_encoder_check_is_cloned(struct intel_encoder *encoder)
7115 struct intel_encoder *other_encoder;
7116 struct drm_crtc *crtc = &encoder->new_crtc->base;
7121 list_for_each_entry(other_encoder,
7122 &crtc->dev->mode_config.encoder_list,
7125 if (&other_encoder->new_crtc->base != crtc ||
7126 encoder == other_encoder)
7135 static bool intel_encoder_crtc_ok(struct drm_encoder *encoder,
7136 struct drm_crtc *crtc)
7138 struct drm_device *dev;
7139 struct drm_crtc *tmp;
7142 WARN(!crtc, "checking null crtc?\n");
7146 list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
7152 if (encoder->possible_crtcs & crtc_mask)
7158 * intel_modeset_update_staged_output_state
7160 * Updates the staged output configuration state, e.g. after we've read out the
7163 static void intel_modeset_update_staged_output_state(struct drm_device *dev)
7165 struct intel_encoder *encoder;
7166 struct intel_connector *connector;
7168 list_for_each_entry(connector, &dev->mode_config.connector_list,
7170 connector->new_encoder =
7171 to_intel_encoder(connector->base.encoder);
7174 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7177 to_intel_crtc(encoder->base.crtc);
7182 * intel_modeset_commit_output_state
7184 * This function copies the stage display pipe configuration to the real one.
7186 static void intel_modeset_commit_output_state(struct drm_device *dev)
7188 struct intel_encoder *encoder;
7189 struct intel_connector *connector;
7191 list_for_each_entry(connector, &dev->mode_config.connector_list,
7193 connector->base.encoder = &connector->new_encoder->base;
7196 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7198 encoder->base.crtc = &encoder->new_crtc->base;
7202 static struct drm_display_mode *
7203 intel_modeset_adjusted_mode(struct drm_crtc *crtc,
7204 struct drm_display_mode *mode)
7206 struct drm_device *dev = crtc->dev;
7207 struct drm_display_mode *adjusted_mode;
7208 struct drm_encoder_helper_funcs *encoder_funcs;
7209 struct intel_encoder *encoder;
7211 adjusted_mode = drm_mode_duplicate(dev, mode);
7213 return ERR_PTR(-ENOMEM);
7215 /* Pass our mode to the connectors and the CRTC to give them a chance to
7216 * adjust it according to limitations or connector properties, and also
7217 * a chance to reject the mode entirely.
7219 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7222 if (&encoder->new_crtc->base != crtc)
7224 encoder_funcs = encoder->base.helper_private;
7225 if (!(encoder_funcs->mode_fixup(&encoder->base, mode,
7227 DRM_DEBUG_KMS("Encoder fixup failed\n");
7232 if (!(intel_crtc_mode_fixup(crtc, mode, adjusted_mode))) {
7233 DRM_DEBUG_KMS("CRTC fixup failed\n");
7236 DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
7238 return adjusted_mode;
7240 drm_mode_destroy(dev, adjusted_mode);
7241 return ERR_PTR(-EINVAL);
7244 /* Computes which crtcs are affected and sets the relevant bits in the mask. For
7245 * simplicity we use the crtc's pipe number (because it's easier to obtain). */
7247 intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
7248 unsigned *prepare_pipes, unsigned *disable_pipes)
7250 struct intel_crtc *intel_crtc;
7251 struct drm_device *dev = crtc->dev;
7252 struct intel_encoder *encoder;
7253 struct intel_connector *connector;
7254 struct drm_crtc *tmp_crtc;
7256 *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
7258 /* Check which crtcs have changed outputs connected to them, these need
7259 * to be part of the prepare_pipes mask. We don't (yet) support global
7260 * modeset across multiple crtcs, so modeset_pipes will only have one
7261 * bit set at most. */
7262 list_for_each_entry(connector, &dev->mode_config.connector_list,
7264 if (connector->base.encoder == &connector->new_encoder->base)
7267 if (connector->base.encoder) {
7268 tmp_crtc = connector->base.encoder->crtc;
7270 *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
7273 if (connector->new_encoder)
7275 1 << connector->new_encoder->new_crtc->pipe;
7278 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7280 if (encoder->base.crtc == &encoder->new_crtc->base)
7283 if (encoder->base.crtc) {
7284 tmp_crtc = encoder->base.crtc;
7286 *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
7289 if (encoder->new_crtc)
7290 *prepare_pipes |= 1 << encoder->new_crtc->pipe;
7293 /* Check for any pipes that will be fully disabled ... */
7294 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
7298 /* Don't try to disable disabled crtcs. */
7299 if (!intel_crtc->base.enabled)
7302 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7304 if (encoder->new_crtc == intel_crtc)
7309 *disable_pipes |= 1 << intel_crtc->pipe;
7313 /* set_mode is also used to update properties on life display pipes. */
7314 intel_crtc = to_intel_crtc(crtc);
7316 *prepare_pipes |= 1 << intel_crtc->pipe;
7318 /* We only support modeset on one single crtc, hence we need to do that
7319 * only for the passed in crtc iff we change anything else than just
7322 * This is actually not true, to be fully compatible with the old crtc
7323 * helper we automatically disable _any_ output (i.e. doesn't need to be
7324 * connected to the crtc we're modesetting on) if it's disconnected.
7325 * Which is a rather nutty api (since changed the output configuration
7326 * without userspace's explicit request can lead to confusion), but
7327 * alas. Hence we currently need to modeset on all pipes we prepare. */
7329 *modeset_pipes = *prepare_pipes;
7331 /* ... and mask these out. */
7332 *modeset_pipes &= ~(*disable_pipes);
7333 *prepare_pipes &= ~(*disable_pipes);
7336 static bool intel_crtc_in_use(struct drm_crtc *crtc)
7338 struct drm_encoder *encoder;
7339 struct drm_device *dev = crtc->dev;
7341 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
7342 if (encoder->crtc == crtc)
7349 intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
7351 struct intel_encoder *intel_encoder;
7352 struct intel_crtc *intel_crtc;
7353 struct drm_connector *connector;
7355 list_for_each_entry(intel_encoder, &dev->mode_config.encoder_list,
7357 if (!intel_encoder->base.crtc)
7360 intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
7362 if (prepare_pipes & (1 << intel_crtc->pipe))
7363 intel_encoder->connectors_active = false;
7366 intel_modeset_commit_output_state(dev);
7368 /* Update computed state. */
7369 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
7371 intel_crtc->base.enabled = intel_crtc_in_use(&intel_crtc->base);
7374 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
7375 if (!connector->encoder || !connector->encoder->crtc)
7378 intel_crtc = to_intel_crtc(connector->encoder->crtc);
7380 if (prepare_pipes & (1 << intel_crtc->pipe)) {
7381 struct drm_property *dpms_property =
7382 dev->mode_config.dpms_property;
7384 connector->dpms = DRM_MODE_DPMS_ON;
7385 drm_connector_property_set_value(connector,
7389 intel_encoder = to_intel_encoder(connector->encoder);
7390 intel_encoder->connectors_active = true;
7396 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
7397 list_for_each_entry((intel_crtc), \
7398 &(dev)->mode_config.crtc_list, \
7400 if (mask & (1 <<(intel_crtc)->pipe)) \
7403 intel_modeset_check_state(struct drm_device *dev)
7405 struct intel_crtc *crtc;
7406 struct intel_encoder *encoder;
7407 struct intel_connector *connector;
7409 list_for_each_entry(connector, &dev->mode_config.connector_list,
7411 /* This also checks the encoder/connector hw state with the
7412 * ->get_hw_state callbacks. */
7413 intel_connector_check_state(connector);
7415 WARN(&connector->new_encoder->base != connector->base.encoder,
7416 "connector's staged encoder doesn't match current encoder\n");
7419 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7421 bool enabled = false;
7422 bool active = false;
7423 enum pipe pipe, tracked_pipe;
7425 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
7426 encoder->base.base.id,
7427 drm_get_encoder_name(&encoder->base));
7429 WARN(&encoder->new_crtc->base != encoder->base.crtc,
7430 "encoder's stage crtc doesn't match current crtc\n");
7431 WARN(encoder->connectors_active && !encoder->base.crtc,
7432 "encoder's active_connectors set, but no crtc\n");
7434 list_for_each_entry(connector, &dev->mode_config.connector_list,
7436 if (connector->base.encoder != &encoder->base)
7439 if (connector->base.dpms != DRM_MODE_DPMS_OFF)
7442 WARN(!!encoder->base.crtc != enabled,
7443 "encoder's enabled state mismatch "
7444 "(expected %i, found %i)\n",
7445 !!encoder->base.crtc, enabled);
7446 WARN(active && !encoder->base.crtc,
7447 "active encoder with no crtc\n");
7449 WARN(encoder->connectors_active != active,
7450 "encoder's computed active state doesn't match tracked active state "
7451 "(expected %i, found %i)\n", active, encoder->connectors_active);
7453 active = encoder->get_hw_state(encoder, &pipe);
7454 WARN(active != encoder->connectors_active,
7455 "encoder's hw state doesn't match sw tracking "
7456 "(expected %i, found %i)\n",
7457 encoder->connectors_active, active);
7459 if (!encoder->base.crtc)
7462 tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
7463 WARN(active && pipe != tracked_pipe,
7464 "active encoder's pipe doesn't match"
7465 "(expected %i, found %i)\n",
7466 tracked_pipe, pipe);
7470 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
7472 bool enabled = false;
7473 bool active = false;
7475 DRM_DEBUG_KMS("[CRTC:%d]\n",
7476 crtc->base.base.id);
7478 WARN(crtc->active && !crtc->base.enabled,
7479 "active crtc, but not enabled in sw tracking\n");
7481 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7483 if (encoder->base.crtc != &crtc->base)
7486 if (encoder->connectors_active)
7489 WARN(active != crtc->active,
7490 "crtc's computed active state doesn't match tracked active state "
7491 "(expected %i, found %i)\n", active, crtc->active);
7492 WARN(enabled != crtc->base.enabled,
7493 "crtc's computed enabled state doesn't match tracked enabled state "
7494 "(expected %i, found %i)\n", enabled, crtc->base.enabled);
7496 assert_pipe(dev->dev_private, crtc->pipe, crtc->active);
7500 bool intel_set_mode(struct drm_crtc *crtc,
7501 struct drm_display_mode *mode,
7502 int x, int y, struct drm_framebuffer *fb)
7504 struct drm_device *dev = crtc->dev;
7505 drm_i915_private_t *dev_priv = dev->dev_private;
7506 struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
7507 struct drm_encoder_helper_funcs *encoder_funcs;
7508 struct drm_encoder *encoder;
7509 struct intel_crtc *intel_crtc;
7510 unsigned disable_pipes, prepare_pipes, modeset_pipes;
7513 intel_modeset_affected_pipes(crtc, &modeset_pipes,
7514 &prepare_pipes, &disable_pipes);
7516 DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
7517 modeset_pipes, prepare_pipes, disable_pipes);
7519 for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
7520 intel_crtc_disable(&intel_crtc->base);
7522 saved_hwmode = crtc->hwmode;
7523 saved_mode = crtc->mode;
7525 /* Hack: Because we don't (yet) support global modeset on multiple
7526 * crtcs, we don't keep track of the new mode for more than one crtc.
7527 * Hence simply check whether any bit is set in modeset_pipes in all the
7528 * pieces of code that are not yet converted to deal with mutliple crtcs
7529 * changing their mode at the same time. */
7530 adjusted_mode = NULL;
7531 if (modeset_pipes) {
7532 adjusted_mode = intel_modeset_adjusted_mode(crtc, mode);
7533 if (IS_ERR(adjusted_mode)) {
7538 for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
7539 if (intel_crtc->base.enabled)
7540 dev_priv->display.crtc_disable(&intel_crtc->base);
7543 /* crtc->mode is already used by the ->mode_set callbacks, hence we need
7544 * to set it here already despite that we pass it down the callchain.
7549 /* Only after disabling all output pipelines that will be changed can we
7550 * update the the output configuration. */
7551 intel_modeset_update_state(dev, prepare_pipes);
7553 /* Set up the DPLL and any encoders state that needs to adjust or depend
7556 for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
7557 ret = !intel_crtc_mode_set(&intel_crtc->base,
7558 mode, adjusted_mode,
7563 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
7565 if (encoder->crtc != &intel_crtc->base)
7568 DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
7569 encoder->base.id, drm_get_encoder_name(encoder),
7570 mode->base.id, mode->name);
7571 encoder_funcs = encoder->helper_private;
7572 encoder_funcs->mode_set(encoder, mode, adjusted_mode);
7576 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
7577 for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc)
7578 dev_priv->display.crtc_enable(&intel_crtc->base);
7580 if (modeset_pipes) {
7581 /* Store real post-adjustment hardware mode. */
7582 crtc->hwmode = *adjusted_mode;
7584 /* Calculate and store various constants which
7585 * are later needed by vblank and swap-completion
7586 * timestamping. They are derived from true hwmode.
7588 drm_calc_timestamping_constants(crtc);
7591 /* FIXME: add subpixel order */
7593 drm_mode_destroy(dev, adjusted_mode);
7594 if (!ret && crtc->enabled) {
7595 crtc->hwmode = saved_hwmode;
7596 crtc->mode = saved_mode;
7598 intel_modeset_check_state(dev);
7604 #undef for_each_intel_crtc_masked
7606 static void intel_set_config_free(struct intel_set_config *config)
7611 kfree(config->save_connector_encoders);
7612 kfree(config->save_encoder_crtcs);
7616 static int intel_set_config_save_state(struct drm_device *dev,
7617 struct intel_set_config *config)
7619 struct drm_encoder *encoder;
7620 struct drm_connector *connector;
7623 config->save_encoder_crtcs =
7624 kcalloc(dev->mode_config.num_encoder,
7625 sizeof(struct drm_crtc *), GFP_KERNEL);
7626 if (!config->save_encoder_crtcs)
7629 config->save_connector_encoders =
7630 kcalloc(dev->mode_config.num_connector,
7631 sizeof(struct drm_encoder *), GFP_KERNEL);
7632 if (!config->save_connector_encoders)
7635 /* Copy data. Note that driver private data is not affected.
7636 * Should anything bad happen only the expected state is
7637 * restored, not the drivers personal bookkeeping.
7640 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
7641 config->save_encoder_crtcs[count++] = encoder->crtc;
7645 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
7646 config->save_connector_encoders[count++] = connector->encoder;
7652 static void intel_set_config_restore_state(struct drm_device *dev,
7653 struct intel_set_config *config)
7655 struct intel_encoder *encoder;
7656 struct intel_connector *connector;
7660 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
7662 to_intel_crtc(config->save_encoder_crtcs[count++]);
7666 list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
7667 connector->new_encoder =
7668 to_intel_encoder(config->save_connector_encoders[count++]);
7673 intel_set_config_compute_mode_changes(struct drm_mode_set *set,
7674 struct intel_set_config *config)
7677 /* We should be able to check here if the fb has the same properties
7678 * and then just flip_or_move it */
7679 if (set->crtc->fb != set->fb) {
7680 /* If we have no fb then treat it as a full mode set */
7681 if (set->crtc->fb == NULL) {
7682 DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
7683 config->mode_changed = true;
7684 } else if (set->fb == NULL) {
7685 config->mode_changed = true;
7686 } else if (set->fb->depth != set->crtc->fb->depth) {
7687 config->mode_changed = true;
7688 } else if (set->fb->bits_per_pixel !=
7689 set->crtc->fb->bits_per_pixel) {
7690 config->mode_changed = true;
7692 config->fb_changed = true;
7695 if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
7696 config->fb_changed = true;
7698 if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
7699 DRM_DEBUG_KMS("modes are different, full mode set\n");
7700 drm_mode_debug_printmodeline(&set->crtc->mode);
7701 drm_mode_debug_printmodeline(set->mode);
7702 config->mode_changed = true;
7707 intel_modeset_stage_output_state(struct drm_device *dev,
7708 struct drm_mode_set *set,
7709 struct intel_set_config *config)
7711 struct drm_crtc *new_crtc;
7712 struct intel_connector *connector;
7713 struct intel_encoder *encoder;
7716 /* The upper layers ensure that we either disabl a crtc or have a list
7717 * of connectors. For paranoia, double-check this. */
7718 WARN_ON(!set->fb && (set->num_connectors != 0));
7719 WARN_ON(set->fb && (set->num_connectors == 0));
7722 list_for_each_entry(connector, &dev->mode_config.connector_list,
7724 /* Otherwise traverse passed in connector list and get encoders
7726 for (ro = 0; ro < set->num_connectors; ro++) {
7727 if (set->connectors[ro] == &connector->base) {
7728 connector->new_encoder = connector->encoder;
7733 /* If we disable the crtc, disable all its connectors. Also, if
7734 * the connector is on the changing crtc but not on the new
7735 * connector list, disable it. */
7736 if ((!set->fb || ro == set->num_connectors) &&
7737 connector->base.encoder &&
7738 connector->base.encoder->crtc == set->crtc) {
7739 connector->new_encoder = NULL;
7741 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
7742 connector->base.base.id,
7743 drm_get_connector_name(&connector->base));
7747 if (&connector->new_encoder->base != connector->base.encoder) {
7748 DRM_DEBUG_KMS("encoder changed, full mode switch\n");
7749 config->mode_changed = true;
7752 /* Disable all disconnected encoders. */
7753 if (connector->base.status == connector_status_disconnected)
7754 connector->new_encoder = NULL;
7756 /* connector->new_encoder is now updated for all connectors. */
7758 /* Update crtc of enabled connectors. */
7760 list_for_each_entry(connector, &dev->mode_config.connector_list,
7762 if (!connector->new_encoder)
7765 new_crtc = connector->new_encoder->base.crtc;
7767 for (ro = 0; ro < set->num_connectors; ro++) {
7768 if (set->connectors[ro] == &connector->base)
7769 new_crtc = set->crtc;
7772 /* Make sure the new CRTC will work with the encoder */
7773 if (!intel_encoder_crtc_ok(&connector->new_encoder->base,
7777 connector->encoder->new_crtc = to_intel_crtc(new_crtc);
7779 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
7780 connector->base.base.id,
7781 drm_get_connector_name(&connector->base),
7785 /* Check for any encoders that needs to be disabled. */
7786 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7788 list_for_each_entry(connector,
7789 &dev->mode_config.connector_list,
7791 if (connector->new_encoder == encoder) {
7792 WARN_ON(!connector->new_encoder->new_crtc);
7797 encoder->new_crtc = NULL;
7799 /* Only now check for crtc changes so we don't miss encoders
7800 * that will be disabled. */
7801 if (&encoder->new_crtc->base != encoder->base.crtc) {
7802 DRM_DEBUG_KMS("crtc changed, full mode switch\n");
7803 config->mode_changed = true;
7806 /* Now we've also updated encoder->new_crtc for all encoders. */
7811 static int intel_crtc_set_config(struct drm_mode_set *set)
7813 struct drm_device *dev;
7814 struct drm_mode_set save_set;
7815 struct intel_set_config *config;
7820 BUG_ON(!set->crtc->helper_private);
7825 /* The fb helper likes to play gross jokes with ->mode_set_config.
7826 * Unfortunately the crtc helper doesn't do much at all for this case,
7827 * so we have to cope with this madness until the fb helper is fixed up. */
7828 if (set->fb && set->num_connectors == 0)
7832 DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
7833 set->crtc->base.id, set->fb->base.id,
7834 (int)set->num_connectors, set->x, set->y);
7836 DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
7839 dev = set->crtc->dev;
7842 config = kzalloc(sizeof(*config), GFP_KERNEL);
7846 ret = intel_set_config_save_state(dev, config);
7850 save_set.crtc = set->crtc;
7851 save_set.mode = &set->crtc->mode;
7852 save_set.x = set->crtc->x;
7853 save_set.y = set->crtc->y;
7854 save_set.fb = set->crtc->fb;
7856 /* Compute whether we need a full modeset, only an fb base update or no
7857 * change at all. In the future we might also check whether only the
7858 * mode changed, e.g. for LVDS where we only change the panel fitter in
7860 intel_set_config_compute_mode_changes(set, config);
7862 ret = intel_modeset_stage_output_state(dev, set, config);
7866 if (config->mode_changed) {
7868 DRM_DEBUG_KMS("attempting to set mode from"
7870 drm_mode_debug_printmodeline(set->mode);
7873 if (!intel_set_mode(set->crtc, set->mode,
7874 set->x, set->y, set->fb)) {
7875 DRM_ERROR("failed to set mode on [CRTC:%d]\n",
7876 set->crtc->base.id);
7880 } else if (config->fb_changed) {
7881 ret = intel_pipe_set_base(set->crtc,
7882 set->x, set->y, set->fb);
7885 intel_set_config_free(config);
7890 intel_set_config_restore_state(dev, config);
7892 /* Try to restore the config */
7893 if (config->mode_changed &&
7894 !intel_set_mode(save_set.crtc, save_set.mode,
7895 save_set.x, save_set.y, save_set.fb))
7896 DRM_ERROR("failed to restore config after modeset failure\n");
7899 intel_set_config_free(config);
7903 static const struct drm_crtc_funcs intel_crtc_funcs = {
7904 .cursor_set = intel_crtc_cursor_set,
7905 .cursor_move = intel_crtc_cursor_move,
7906 .gamma_set = intel_crtc_gamma_set,
7907 .set_config = intel_crtc_set_config,
7908 .destroy = intel_crtc_destroy,
7909 .page_flip = intel_crtc_page_flip,
7912 static void intel_cpu_pll_init(struct drm_device *dev)
7914 if (IS_HASWELL(dev))
7915 intel_ddi_pll_init(dev);
7918 static void intel_pch_pll_init(struct drm_device *dev)
7920 drm_i915_private_t *dev_priv = dev->dev_private;
7923 if (dev_priv->num_pch_pll == 0) {
7924 DRM_DEBUG_KMS("No PCH PLLs on this hardware, skipping initialisation\n");
7928 for (i = 0; i < dev_priv->num_pch_pll; i++) {
7929 dev_priv->pch_plls[i].pll_reg = _PCH_DPLL(i);
7930 dev_priv->pch_plls[i].fp0_reg = _PCH_FP0(i);
7931 dev_priv->pch_plls[i].fp1_reg = _PCH_FP1(i);
7935 static void intel_crtc_init(struct drm_device *dev, int pipe)
7937 drm_i915_private_t *dev_priv = dev->dev_private;
7938 struct intel_crtc *intel_crtc;
7941 intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
7942 if (intel_crtc == NULL)
7945 drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
7947 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
7948 for (i = 0; i < 256; i++) {
7949 intel_crtc->lut_r[i] = i;
7950 intel_crtc->lut_g[i] = i;
7951 intel_crtc->lut_b[i] = i;
7954 /* Swap pipes & planes for FBC on pre-965 */
7955 intel_crtc->pipe = pipe;
7956 intel_crtc->plane = pipe;
7957 intel_crtc->cpu_transcoder = pipe;
7958 if (IS_MOBILE(dev) && IS_GEN3(dev)) {
7959 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
7960 intel_crtc->plane = !pipe;
7963 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
7964 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
7965 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
7966 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
7968 intel_crtc->bpp = 24; /* default for pre-Ironlake */
7970 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
7973 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
7974 struct drm_file *file)
7976 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
7977 struct drm_mode_object *drmmode_obj;
7978 struct intel_crtc *crtc;
7980 if (!drm_core_check_feature(dev, DRIVER_MODESET))
7983 drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
7984 DRM_MODE_OBJECT_CRTC);
7987 DRM_ERROR("no such CRTC id\n");
7991 crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
7992 pipe_from_crtc_id->pipe = crtc->pipe;
7997 static int intel_encoder_clones(struct intel_encoder *encoder)
7999 struct drm_device *dev = encoder->base.dev;
8000 struct intel_encoder *source_encoder;
8004 list_for_each_entry(source_encoder,
8005 &dev->mode_config.encoder_list, base.head) {
8007 if (encoder == source_encoder)
8008 index_mask |= (1 << entry);
8010 /* Intel hw has only one MUX where enocoders could be cloned. */
8011 if (encoder->cloneable && source_encoder->cloneable)
8012 index_mask |= (1 << entry);
8020 static bool has_edp_a(struct drm_device *dev)
8022 struct drm_i915_private *dev_priv = dev->dev_private;
8024 if (!IS_MOBILE(dev))
8027 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
8031 (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
8037 static void intel_setup_outputs(struct drm_device *dev)
8039 struct drm_i915_private *dev_priv = dev->dev_private;
8040 struct intel_encoder *encoder;
8041 bool dpd_is_edp = false;
8044 has_lvds = intel_lvds_init(dev);
8045 if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
8046 /* disable the panel fitter on everything but LVDS */
8047 I915_WRITE(PFIT_CONTROL, 0);
8050 if (HAS_PCH_SPLIT(dev)) {
8051 dpd_is_edp = intel_dpd_is_edp(dev);
8054 intel_dp_init(dev, DP_A, PORT_A);
8056 if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
8057 intel_dp_init(dev, PCH_DP_D, PORT_D);
8060 intel_crt_init(dev);
8062 if (IS_HASWELL(dev)) {
8065 /* Haswell uses DDI functions to detect digital outputs */
8066 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
8067 /* DDI A only supports eDP */
8069 intel_ddi_init(dev, PORT_A);
8071 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
8073 found = I915_READ(SFUSE_STRAP);
8075 if (found & SFUSE_STRAP_DDIB_DETECTED)
8076 intel_ddi_init(dev, PORT_B);
8077 if (found & SFUSE_STRAP_DDIC_DETECTED)
8078 intel_ddi_init(dev, PORT_C);
8079 if (found & SFUSE_STRAP_DDID_DETECTED)
8080 intel_ddi_init(dev, PORT_D);
8081 } else if (HAS_PCH_SPLIT(dev)) {
8084 if (I915_READ(HDMIB) & PORT_DETECTED) {
8085 /* PCH SDVOB multiplex with HDMIB */
8086 found = intel_sdvo_init(dev, PCH_SDVOB, true);
8088 intel_hdmi_init(dev, HDMIB, PORT_B);
8089 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
8090 intel_dp_init(dev, PCH_DP_B, PORT_B);
8093 if (I915_READ(HDMIC) & PORT_DETECTED)
8094 intel_hdmi_init(dev, HDMIC, PORT_C);
8096 if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED)
8097 intel_hdmi_init(dev, HDMID, PORT_D);
8099 if (I915_READ(PCH_DP_C) & DP_DETECTED)
8100 intel_dp_init(dev, PCH_DP_C, PORT_C);
8102 if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
8103 intel_dp_init(dev, PCH_DP_D, PORT_D);
8104 } else if (IS_VALLEYVIEW(dev)) {
8107 /* Check for built-in panel first. Shares lanes with HDMI on SDVOC */
8108 if (I915_READ(DP_C) & DP_DETECTED)
8109 intel_dp_init(dev, DP_C, PORT_C);
8111 if (I915_READ(SDVOB) & PORT_DETECTED) {
8112 /* SDVOB multiplex with HDMIB */
8113 found = intel_sdvo_init(dev, SDVOB, true);
8115 intel_hdmi_init(dev, SDVOB, PORT_B);
8116 if (!found && (I915_READ(DP_B) & DP_DETECTED))
8117 intel_dp_init(dev, DP_B, PORT_B);
8120 if (I915_READ(SDVOC) & PORT_DETECTED)
8121 intel_hdmi_init(dev, SDVOC, PORT_C);
8123 } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
8126 if (I915_READ(SDVOB) & SDVO_DETECTED) {
8127 DRM_DEBUG_KMS("probing SDVOB\n");
8128 found = intel_sdvo_init(dev, SDVOB, true);
8129 if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
8130 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
8131 intel_hdmi_init(dev, SDVOB, PORT_B);
8134 if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
8135 DRM_DEBUG_KMS("probing DP_B\n");
8136 intel_dp_init(dev, DP_B, PORT_B);
8140 /* Before G4X SDVOC doesn't have its own detect register */
8142 if (I915_READ(SDVOB) & SDVO_DETECTED) {
8143 DRM_DEBUG_KMS("probing SDVOC\n");
8144 found = intel_sdvo_init(dev, SDVOC, false);
8147 if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
8149 if (SUPPORTS_INTEGRATED_HDMI(dev)) {
8150 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
8151 intel_hdmi_init(dev, SDVOC, PORT_C);
8153 if (SUPPORTS_INTEGRATED_DP(dev)) {
8154 DRM_DEBUG_KMS("probing DP_C\n");
8155 intel_dp_init(dev, DP_C, PORT_C);
8159 if (SUPPORTS_INTEGRATED_DP(dev) &&
8160 (I915_READ(DP_D) & DP_DETECTED)) {
8161 DRM_DEBUG_KMS("probing DP_D\n");
8162 intel_dp_init(dev, DP_D, PORT_D);
8164 } else if (IS_GEN2(dev))
8165 intel_dvo_init(dev);
8167 if (SUPPORTS_TV(dev))
8170 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
8171 encoder->base.possible_crtcs = encoder->crtc_mask;
8172 encoder->base.possible_clones =
8173 intel_encoder_clones(encoder);
8176 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
8177 ironlake_init_pch_refclk(dev);
8180 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
8182 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
8184 drm_framebuffer_cleanup(fb);
8185 drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
8190 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
8191 struct drm_file *file,
8192 unsigned int *handle)
8194 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
8195 struct drm_i915_gem_object *obj = intel_fb->obj;
8197 return drm_gem_handle_create(file, &obj->base, handle);
8200 static const struct drm_framebuffer_funcs intel_fb_funcs = {
8201 .destroy = intel_user_framebuffer_destroy,
8202 .create_handle = intel_user_framebuffer_create_handle,
8205 int intel_framebuffer_init(struct drm_device *dev,
8206 struct intel_framebuffer *intel_fb,
8207 struct drm_mode_fb_cmd2 *mode_cmd,
8208 struct drm_i915_gem_object *obj)
8212 if (obj->tiling_mode == I915_TILING_Y)
8215 if (mode_cmd->pitches[0] & 63)
8218 switch (mode_cmd->pixel_format) {
8219 case DRM_FORMAT_RGB332:
8220 case DRM_FORMAT_RGB565:
8221 case DRM_FORMAT_XRGB8888:
8222 case DRM_FORMAT_XBGR8888:
8223 case DRM_FORMAT_ARGB8888:
8224 case DRM_FORMAT_XRGB2101010:
8225 case DRM_FORMAT_ARGB2101010:
8226 /* RGB formats are common across chipsets */
8228 case DRM_FORMAT_YUYV:
8229 case DRM_FORMAT_UYVY:
8230 case DRM_FORMAT_YVYU:
8231 case DRM_FORMAT_VYUY:
8234 DRM_DEBUG_KMS("unsupported pixel format %u\n",
8235 mode_cmd->pixel_format);
8239 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
8241 DRM_ERROR("framebuffer init failed %d\n", ret);
8245 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
8246 intel_fb->obj = obj;
8250 static struct drm_framebuffer *
8251 intel_user_framebuffer_create(struct drm_device *dev,
8252 struct drm_file *filp,
8253 struct drm_mode_fb_cmd2 *mode_cmd)
8255 struct drm_i915_gem_object *obj;
8257 obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
8258 mode_cmd->handles[0]));
8259 if (&obj->base == NULL)
8260 return ERR_PTR(-ENOENT);
8262 return intel_framebuffer_create(dev, mode_cmd, obj);
8265 static const struct drm_mode_config_funcs intel_mode_funcs = {
8266 .fb_create = intel_user_framebuffer_create,
8267 .output_poll_changed = intel_fb_output_poll_changed,
8270 /* Set up chip specific display functions */
8271 static void intel_init_display(struct drm_device *dev)
8273 struct drm_i915_private *dev_priv = dev->dev_private;
8275 /* We always want a DPMS function */
8276 if (IS_HASWELL(dev)) {
8277 dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
8278 dev_priv->display.crtc_enable = haswell_crtc_enable;
8279 dev_priv->display.crtc_disable = haswell_crtc_disable;
8280 dev_priv->display.off = haswell_crtc_off;
8281 dev_priv->display.update_plane = ironlake_update_plane;
8282 } else if (HAS_PCH_SPLIT(dev)) {
8283 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
8284 dev_priv->display.crtc_enable = ironlake_crtc_enable;
8285 dev_priv->display.crtc_disable = ironlake_crtc_disable;
8286 dev_priv->display.off = ironlake_crtc_off;
8287 dev_priv->display.update_plane = ironlake_update_plane;
8289 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
8290 dev_priv->display.crtc_enable = i9xx_crtc_enable;
8291 dev_priv->display.crtc_disable = i9xx_crtc_disable;
8292 dev_priv->display.off = i9xx_crtc_off;
8293 dev_priv->display.update_plane = i9xx_update_plane;
8296 /* Returns the core display clock speed */
8297 if (IS_VALLEYVIEW(dev))
8298 dev_priv->display.get_display_clock_speed =
8299 valleyview_get_display_clock_speed;
8300 else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
8301 dev_priv->display.get_display_clock_speed =
8302 i945_get_display_clock_speed;
8303 else if (IS_I915G(dev))
8304 dev_priv->display.get_display_clock_speed =
8305 i915_get_display_clock_speed;
8306 else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
8307 dev_priv->display.get_display_clock_speed =
8308 i9xx_misc_get_display_clock_speed;
8309 else if (IS_I915GM(dev))
8310 dev_priv->display.get_display_clock_speed =
8311 i915gm_get_display_clock_speed;
8312 else if (IS_I865G(dev))
8313 dev_priv->display.get_display_clock_speed =
8314 i865_get_display_clock_speed;
8315 else if (IS_I85X(dev))
8316 dev_priv->display.get_display_clock_speed =
8317 i855_get_display_clock_speed;
8319 dev_priv->display.get_display_clock_speed =
8320 i830_get_display_clock_speed;
8322 if (HAS_PCH_SPLIT(dev)) {
8324 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
8325 dev_priv->display.write_eld = ironlake_write_eld;
8326 } else if (IS_GEN6(dev)) {
8327 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
8328 dev_priv->display.write_eld = ironlake_write_eld;
8329 } else if (IS_IVYBRIDGE(dev)) {
8330 /* FIXME: detect B0+ stepping and use auto training */
8331 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
8332 dev_priv->display.write_eld = ironlake_write_eld;
8333 } else if (IS_HASWELL(dev)) {
8334 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
8335 dev_priv->display.write_eld = haswell_write_eld;
8337 dev_priv->display.update_wm = NULL;
8338 } else if (IS_G4X(dev)) {
8339 dev_priv->display.write_eld = g4x_write_eld;
8342 /* Default just returns -ENODEV to indicate unsupported */
8343 dev_priv->display.queue_flip = intel_default_queue_flip;
8345 switch (INTEL_INFO(dev)->gen) {
8347 dev_priv->display.queue_flip = intel_gen2_queue_flip;
8351 dev_priv->display.queue_flip = intel_gen3_queue_flip;
8356 dev_priv->display.queue_flip = intel_gen4_queue_flip;
8360 dev_priv->display.queue_flip = intel_gen6_queue_flip;
8363 dev_priv->display.queue_flip = intel_gen7_queue_flip;
8369 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
8370 * resume, or other times. This quirk makes sure that's the case for
8373 static void quirk_pipea_force(struct drm_device *dev)
8375 struct drm_i915_private *dev_priv = dev->dev_private;
8377 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
8378 DRM_INFO("applying pipe a force quirk\n");
8382 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
8384 static void quirk_ssc_force_disable(struct drm_device *dev)
8386 struct drm_i915_private *dev_priv = dev->dev_private;
8387 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
8388 DRM_INFO("applying lvds SSC disable quirk\n");
8392 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
8395 static void quirk_invert_brightness(struct drm_device *dev)
8397 struct drm_i915_private *dev_priv = dev->dev_private;
8398 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
8399 DRM_INFO("applying inverted panel brightness quirk\n");
8402 struct intel_quirk {
8404 int subsystem_vendor;
8405 int subsystem_device;
8406 void (*hook)(struct drm_device *dev);
8409 static struct intel_quirk intel_quirks[] = {
8410 /* HP Mini needs pipe A force quirk (LP: #322104) */
8411 { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
8413 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
8414 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
8416 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
8417 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
8419 /* 830/845 need to leave pipe A & dpll A up */
8420 { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
8421 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
8423 /* Lenovo U160 cannot use SSC on LVDS */
8424 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
8426 /* Sony Vaio Y cannot use SSC on LVDS */
8427 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
8429 /* Acer Aspire 5734Z must invert backlight brightness */
8430 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
8433 static void intel_init_quirks(struct drm_device *dev)
8435 struct pci_dev *d = dev->pdev;
8438 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
8439 struct intel_quirk *q = &intel_quirks[i];
8441 if (d->device == q->device &&
8442 (d->subsystem_vendor == q->subsystem_vendor ||
8443 q->subsystem_vendor == PCI_ANY_ID) &&
8444 (d->subsystem_device == q->subsystem_device ||
8445 q->subsystem_device == PCI_ANY_ID))
8450 /* Disable the VGA plane that we never use */
8451 static void i915_disable_vga(struct drm_device *dev)
8453 struct drm_i915_private *dev_priv = dev->dev_private;
8457 if (HAS_PCH_SPLIT(dev))
8458 vga_reg = CPU_VGACNTRL;
8462 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
8463 outb(SR01, VGA_SR_INDEX);
8464 sr1 = inb(VGA_SR_DATA);
8465 outb(sr1 | 1<<5, VGA_SR_DATA);
8466 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
8469 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
8470 POSTING_READ(vga_reg);
8473 void intel_modeset_init_hw(struct drm_device *dev)
8475 /* We attempt to init the necessary power wells early in the initialization
8476 * time, so the subsystems that expect power to be enabled can work.
8478 intel_init_power_wells(dev);
8480 intel_prepare_ddi(dev);
8482 intel_init_clock_gating(dev);
8484 mutex_lock(&dev->struct_mutex);
8485 intel_enable_gt_powersave(dev);
8486 mutex_unlock(&dev->struct_mutex);
8489 void intel_modeset_init(struct drm_device *dev)
8491 struct drm_i915_private *dev_priv = dev->dev_private;
8494 drm_mode_config_init(dev);
8496 dev->mode_config.min_width = 0;
8497 dev->mode_config.min_height = 0;
8499 dev->mode_config.preferred_depth = 24;
8500 dev->mode_config.prefer_shadow = 1;
8502 dev->mode_config.funcs = &intel_mode_funcs;
8504 intel_init_quirks(dev);
8508 intel_init_display(dev);
8511 dev->mode_config.max_width = 2048;
8512 dev->mode_config.max_height = 2048;
8513 } else if (IS_GEN3(dev)) {
8514 dev->mode_config.max_width = 4096;
8515 dev->mode_config.max_height = 4096;
8517 dev->mode_config.max_width = 8192;
8518 dev->mode_config.max_height = 8192;
8520 dev->mode_config.fb_base = dev_priv->mm.gtt_base_addr;
8522 DRM_DEBUG_KMS("%d display pipe%s available.\n",
8523 dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
8525 for (i = 0; i < dev_priv->num_pipe; i++) {
8526 intel_crtc_init(dev, i);
8527 ret = intel_plane_init(dev, i);
8529 DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
8532 intel_cpu_pll_init(dev);
8533 intel_pch_pll_init(dev);
8535 /* Just disable it once at startup */
8536 i915_disable_vga(dev);
8537 intel_setup_outputs(dev);
8541 intel_connector_break_all_links(struct intel_connector *connector)
8543 connector->base.dpms = DRM_MODE_DPMS_OFF;
8544 connector->base.encoder = NULL;
8545 connector->encoder->connectors_active = false;
8546 connector->encoder->base.crtc = NULL;
8549 static void intel_enable_pipe_a(struct drm_device *dev)
8551 struct intel_connector *connector;
8552 struct drm_connector *crt = NULL;
8553 struct intel_load_detect_pipe load_detect_temp;
8555 /* We can't just switch on the pipe A, we need to set things up with a
8556 * proper mode and output configuration. As a gross hack, enable pipe A
8557 * by enabling the load detect pipe once. */
8558 list_for_each_entry(connector,
8559 &dev->mode_config.connector_list,
8561 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
8562 crt = &connector->base;
8570 if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp))
8571 intel_release_load_detect_pipe(crt, &load_detect_temp);
8577 intel_check_plane_mapping(struct intel_crtc *crtc)
8579 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
8582 if (dev_priv->num_pipe == 1)
8585 reg = DSPCNTR(!crtc->plane);
8586 val = I915_READ(reg);
8588 if ((val & DISPLAY_PLANE_ENABLE) &&
8589 (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
8595 static void intel_sanitize_crtc(struct intel_crtc *crtc)
8597 struct drm_device *dev = crtc->base.dev;
8598 struct drm_i915_private *dev_priv = dev->dev_private;
8601 /* Clear any frame start delays used for debugging left by the BIOS */
8602 reg = PIPECONF(crtc->cpu_transcoder);
8603 I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
8605 /* We need to sanitize the plane -> pipe mapping first because this will
8606 * disable the crtc (and hence change the state) if it is wrong. Note
8607 * that gen4+ has a fixed plane -> pipe mapping. */
8608 if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
8609 struct intel_connector *connector;
8612 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
8613 crtc->base.base.id);
8615 /* Pipe has the wrong plane attached and the plane is active.
8616 * Temporarily change the plane mapping and disable everything
8618 plane = crtc->plane;
8619 crtc->plane = !plane;
8620 dev_priv->display.crtc_disable(&crtc->base);
8621 crtc->plane = plane;
8623 /* ... and break all links. */
8624 list_for_each_entry(connector, &dev->mode_config.connector_list,
8626 if (connector->encoder->base.crtc != &crtc->base)
8629 intel_connector_break_all_links(connector);
8632 WARN_ON(crtc->active);
8633 crtc->base.enabled = false;
8636 if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
8637 crtc->pipe == PIPE_A && !crtc->active) {
8638 /* BIOS forgot to enable pipe A, this mostly happens after
8639 * resume. Force-enable the pipe to fix this, the update_dpms
8640 * call below we restore the pipe to the right state, but leave
8641 * the required bits on. */
8642 intel_enable_pipe_a(dev);
8645 /* Adjust the state of the output pipe according to whether we
8646 * have active connectors/encoders. */
8647 intel_crtc_update_dpms(&crtc->base);
8649 if (crtc->active != crtc->base.enabled) {
8650 struct intel_encoder *encoder;
8652 /* This can happen either due to bugs in the get_hw_state
8653 * functions or because the pipe is force-enabled due to the
8655 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
8657 crtc->base.enabled ? "enabled" : "disabled",
8658 crtc->active ? "enabled" : "disabled");
8660 crtc->base.enabled = crtc->active;
8662 /* Because we only establish the connector -> encoder ->
8663 * crtc links if something is active, this means the
8664 * crtc is now deactivated. Break the links. connector
8665 * -> encoder links are only establish when things are
8666 * actually up, hence no need to break them. */
8667 WARN_ON(crtc->active);
8669 for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
8670 WARN_ON(encoder->connectors_active);
8671 encoder->base.crtc = NULL;
8676 static void intel_sanitize_encoder(struct intel_encoder *encoder)
8678 struct intel_connector *connector;
8679 struct drm_device *dev = encoder->base.dev;
8681 /* We need to check both for a crtc link (meaning that the
8682 * encoder is active and trying to read from a pipe) and the
8683 * pipe itself being active. */
8684 bool has_active_crtc = encoder->base.crtc &&
8685 to_intel_crtc(encoder->base.crtc)->active;
8687 if (encoder->connectors_active && !has_active_crtc) {
8688 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
8689 encoder->base.base.id,
8690 drm_get_encoder_name(&encoder->base));
8692 /* Connector is active, but has no active pipe. This is
8693 * fallout from our resume register restoring. Disable
8694 * the encoder manually again. */
8695 if (encoder->base.crtc) {
8696 DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
8697 encoder->base.base.id,
8698 drm_get_encoder_name(&encoder->base));
8699 encoder->disable(encoder);
8702 /* Inconsistent output/port/pipe state happens presumably due to
8703 * a bug in one of the get_hw_state functions. Or someplace else
8704 * in our code, like the register restore mess on resume. Clamp
8705 * things to off as a safer default. */
8706 list_for_each_entry(connector,
8707 &dev->mode_config.connector_list,
8709 if (connector->encoder != encoder)
8712 intel_connector_break_all_links(connector);
8715 /* Enabled encoders without active connectors will be fixed in
8716 * the crtc fixup. */
8719 /* Scan out the current hw modeset state, sanitizes it and maps it into the drm
8720 * and i915 state tracking structures. */
8721 void intel_modeset_setup_hw_state(struct drm_device *dev)
8723 struct drm_i915_private *dev_priv = dev->dev_private;
8726 struct intel_crtc *crtc;
8727 struct intel_encoder *encoder;
8728 struct intel_connector *connector;
8730 if (IS_HASWELL(dev)) {
8731 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
8733 if (tmp & TRANS_DDI_FUNC_ENABLE) {
8734 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
8735 case TRANS_DDI_EDP_INPUT_A_ON:
8736 case TRANS_DDI_EDP_INPUT_A_ONOFF:
8739 case TRANS_DDI_EDP_INPUT_B_ONOFF:
8742 case TRANS_DDI_EDP_INPUT_C_ONOFF:
8747 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
8748 crtc->cpu_transcoder = TRANSCODER_EDP;
8750 DRM_DEBUG_KMS("Pipe %c using transcoder EDP\n",
8755 for_each_pipe(pipe) {
8756 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
8758 tmp = I915_READ(PIPECONF(crtc->cpu_transcoder));
8759 if (tmp & PIPECONF_ENABLE)
8760 crtc->active = true;
8762 crtc->active = false;
8764 crtc->base.enabled = crtc->active;
8766 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
8768 crtc->active ? "enabled" : "disabled");
8771 if (IS_HASWELL(dev))
8772 intel_ddi_setup_hw_pll_state(dev);
8774 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8778 if (encoder->get_hw_state(encoder, &pipe)) {
8779 encoder->base.crtc =
8780 dev_priv->pipe_to_crtc_mapping[pipe];
8782 encoder->base.crtc = NULL;
8785 encoder->connectors_active = false;
8786 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe=%i\n",
8787 encoder->base.base.id,
8788 drm_get_encoder_name(&encoder->base),
8789 encoder->base.crtc ? "enabled" : "disabled",
8793 list_for_each_entry(connector, &dev->mode_config.connector_list,
8795 if (connector->get_hw_state(connector)) {
8796 connector->base.dpms = DRM_MODE_DPMS_ON;
8797 connector->encoder->connectors_active = true;
8798 connector->base.encoder = &connector->encoder->base;
8800 connector->base.dpms = DRM_MODE_DPMS_OFF;
8801 connector->base.encoder = NULL;
8803 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
8804 connector->base.base.id,
8805 drm_get_connector_name(&connector->base),
8806 connector->base.encoder ? "enabled" : "disabled");
8809 /* HW state is read out, now we need to sanitize this mess. */
8810 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8812 intel_sanitize_encoder(encoder);
8815 for_each_pipe(pipe) {
8816 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
8817 intel_sanitize_crtc(crtc);
8820 intel_modeset_update_staged_output_state(dev);
8822 intel_modeset_check_state(dev);
8824 drm_mode_config_reset(dev);
8827 void intel_modeset_gem_init(struct drm_device *dev)
8829 intel_modeset_init_hw(dev);
8831 intel_setup_overlay(dev);
8833 intel_modeset_setup_hw_state(dev);
8836 void intel_modeset_cleanup(struct drm_device *dev)
8838 struct drm_i915_private *dev_priv = dev->dev_private;
8839 struct drm_crtc *crtc;
8840 struct intel_crtc *intel_crtc;
8842 drm_kms_helper_poll_fini(dev);
8843 mutex_lock(&dev->struct_mutex);
8845 intel_unregister_dsm_handler();
8848 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
8849 /* Skip inactive CRTCs */
8853 intel_crtc = to_intel_crtc(crtc);
8854 intel_increase_pllclock(crtc);
8857 intel_disable_fbc(dev);
8859 intel_disable_gt_powersave(dev);
8861 ironlake_teardown_rc6(dev);
8863 if (IS_VALLEYVIEW(dev))
8866 mutex_unlock(&dev->struct_mutex);
8868 /* Disable the irq before mode object teardown, for the irq might
8869 * enqueue unpin/hotplug work. */
8870 drm_irq_uninstall(dev);
8871 cancel_work_sync(&dev_priv->hotplug_work);
8872 cancel_work_sync(&dev_priv->rps.work);
8874 /* flush any delayed tasks or pending work */
8875 flush_scheduled_work();
8877 drm_mode_config_cleanup(dev);
8881 * Return which encoder is currently attached for connector.
8883 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
8885 return &intel_attached_encoder(connector)->base;
8888 void intel_connector_attach_encoder(struct intel_connector *connector,
8889 struct intel_encoder *encoder)
8891 connector->encoder = encoder;
8892 drm_mode_connector_attach_encoder(&connector->base,
8897 * set vga decode state - true == enable VGA decode
8899 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
8901 struct drm_i915_private *dev_priv = dev->dev_private;
8904 pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
8906 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
8908 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
8909 pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
8913 #ifdef CONFIG_DEBUG_FS
8914 #include <linux/seq_file.h>
8916 struct intel_display_error_state {
8917 struct intel_cursor_error_state {
8922 } cursor[I915_MAX_PIPES];
8924 struct intel_pipe_error_state {
8934 } pipe[I915_MAX_PIPES];
8936 struct intel_plane_error_state {
8944 } plane[I915_MAX_PIPES];
8947 struct intel_display_error_state *
8948 intel_display_capture_error_state(struct drm_device *dev)
8950 drm_i915_private_t *dev_priv = dev->dev_private;
8951 struct intel_display_error_state *error;
8952 enum transcoder cpu_transcoder;
8955 error = kmalloc(sizeof(*error), GFP_ATOMIC);
8960 cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i);
8962 error->cursor[i].control = I915_READ(CURCNTR(i));
8963 error->cursor[i].position = I915_READ(CURPOS(i));
8964 error->cursor[i].base = I915_READ(CURBASE(i));
8966 error->plane[i].control = I915_READ(DSPCNTR(i));
8967 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
8968 error->plane[i].size = I915_READ(DSPSIZE(i));
8969 error->plane[i].pos = I915_READ(DSPPOS(i));
8970 error->plane[i].addr = I915_READ(DSPADDR(i));
8971 if (INTEL_INFO(dev)->gen >= 4) {
8972 error->plane[i].surface = I915_READ(DSPSURF(i));
8973 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
8976 error->pipe[i].conf = I915_READ(PIPECONF(cpu_transcoder));
8977 error->pipe[i].source = I915_READ(PIPESRC(i));
8978 error->pipe[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
8979 error->pipe[i].hblank = I915_READ(HBLANK(cpu_transcoder));
8980 error->pipe[i].hsync = I915_READ(HSYNC(cpu_transcoder));
8981 error->pipe[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
8982 error->pipe[i].vblank = I915_READ(VBLANK(cpu_transcoder));
8983 error->pipe[i].vsync = I915_READ(VSYNC(cpu_transcoder));
8990 intel_display_print_error_state(struct seq_file *m,
8991 struct drm_device *dev,
8992 struct intel_display_error_state *error)
8994 drm_i915_private_t *dev_priv = dev->dev_private;
8997 seq_printf(m, "Num Pipes: %d\n", dev_priv->num_pipe);
8999 seq_printf(m, "Pipe [%d]:\n", i);
9000 seq_printf(m, " CONF: %08x\n", error->pipe[i].conf);
9001 seq_printf(m, " SRC: %08x\n", error->pipe[i].source);
9002 seq_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal);
9003 seq_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank);
9004 seq_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync);
9005 seq_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal);
9006 seq_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank);
9007 seq_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync);
9009 seq_printf(m, "Plane [%d]:\n", i);
9010 seq_printf(m, " CNTR: %08x\n", error->plane[i].control);
9011 seq_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
9012 seq_printf(m, " SIZE: %08x\n", error->plane[i].size);
9013 seq_printf(m, " POS: %08x\n", error->plane[i].pos);
9014 seq_printf(m, " ADDR: %08x\n", error->plane[i].addr);
9015 if (INTEL_INFO(dev)->gen >= 4) {
9016 seq_printf(m, " SURF: %08x\n", error->plane[i].surface);
9017 seq_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
9020 seq_printf(m, "Cursor [%d]:\n", i);
9021 seq_printf(m, " CNTR: %08x\n", error->cursor[i].control);
9022 seq_printf(m, " POS: %08x\n", error->cursor[i].position);
9023 seq_printf(m, " BASE: %08x\n", error->cursor[i].base);