Pileus Git - ~andy/linux/blob - drivers/gpu/drm/i915/intel_display.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <eric@anholt.net>
  25  */
  26
  27 #include <linux/dmi.h>
  28 #include <linux/module.h>
  29 #include <linux/input.h>
  30 #include <linux/i2c.h>
  31 #include <linux/kernel.h>
  32 #include <linux/slab.h>
  33 #include <linux/vgaarb.h>
  34 #include <drm/drm_edid.h>
  35 #include <drm/drmP.h>
  36 #include "intel_drv.h"
  37 #include <drm/i915_drm.h>
  38 #include "i915_drv.h"
  39 #include "i915_trace.h"
  40 #include <drm/drm_dp_helper.h>
  41 #include <drm/drm_crtc_helper.h>
  42 #include <linux/dma_remapping.h>
  43
  44 bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
  45 static void intel_increase_pllclock(struct drm_crtc *crtc);
  46 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
  47
  48 typedef struct {
  49         /* given values */
  50         int n;
  51         int m1, m2;
  52         int p1, p2;
  53         /* derived values */
  54         int     dot;
  55         int     vco;
  56         int     m;
  57         int     p;
  58 } intel_clock_t;
  59
  60 typedef struct {
  61         int     min, max;
  62 } intel_range_t;
  63
  64 typedef struct {
  65         int     dot_limit;
  66         int     p2_slow, p2_fast;
  67 } intel_p2_t;
  68
  69 #define INTEL_P2_NUM                  2
  70 typedef struct intel_limit intel_limit_t;
  71 struct intel_limit {
  72         intel_range_t   dot, vco, n, m, m1, m2, p, p1;
  73         intel_p2_t          p2;
  74         /**
  75          * find_pll() - Find the best values for the PLL
  76          * @limit: limits for the PLL
  77          * @crtc: current CRTC
  78          * @target: target frequency in kHz
  79          * @refclk: reference clock frequency in kHz
  80          * @match_clock: if provided, @best_clock P divider must
  81          *               match the P divider from @match_clock
  82          *               used for LVDS downclocking
  83          * @best_clock: best PLL values found
  84          *
  85          * Returns true on success, false on failure.
  86          */
  87         bool (*find_pll)(const intel_limit_t *limit,
  88                          struct drm_crtc *crtc,
  89                          int target, int refclk,
  90                          intel_clock_t *match_clock,
  91                          intel_clock_t *best_clock);
  92 };
  93
  94 /* FDI */
  95 #define IRONLAKE_FDI_FREQ               2700000 /* in kHz for mode->clock */
  96
  97 int
  98 intel_pch_rawclk(struct drm_device *dev)
  99 {
 100         struct drm_i915_private *dev_priv = dev->dev_private;
 101
 102         WARN_ON(!HAS_PCH_SPLIT(dev));
 103
 104         return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
 105 }
 106
 107 static bool
 108 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 109                     int target, int refclk, intel_clock_t *match_clock,
 110                     intel_clock_t *best_clock);
 111 static bool
 112 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 113                         int target, int refclk, intel_clock_t *match_clock,
 114                         intel_clock_t *best_clock);
 115
 116 static bool
 117 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
 118                       int target, int refclk, intel_clock_t *match_clock,
 119                       intel_clock_t *best_clock);
 120 static bool
 121 intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
 122                            int target, int refclk, intel_clock_t *match_clock,
 123                            intel_clock_t *best_clock);
 124
 125 static bool
 126 intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
 127                         int target, int refclk, intel_clock_t *match_clock,
 128                         intel_clock_t *best_clock);
 129
 130 static inline u32 /* units of 100MHz */
 131 intel_fdi_link_freq(struct drm_device *dev)
 132 {
 133         if (IS_GEN5(dev)) {
 134                 struct drm_i915_private *dev_priv = dev->dev_private;
 135                 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
 136         } else
 137                 return 27;
 138 }
 139
 140 static const intel_limit_t intel_limits_i8xx_dvo = {
 141         .dot = { .min = 25000, .max = 350000 },
 142         .vco = { .min = 930000, .max = 1400000 },
 143         .n = { .min = 3, .max = 16 },
 144         .m = { .min = 96, .max = 140 },
 145         .m1 = { .min = 18, .max = 26 },
 146         .m2 = { .min = 6, .max = 16 },
 147         .p = { .min = 4, .max = 128 },
 148         .p1 = { .min = 2, .max = 33 },
 149         .p2 = { .dot_limit = 165000,
 150                 .p2_slow = 4, .p2_fast = 2 },
 151         .find_pll = intel_find_best_PLL,
 152 };
 153
 154 static const intel_limit_t intel_limits_i8xx_lvds = {
 155         .dot = { .min = 25000, .max = 350000 },
 156         .vco = { .min = 930000, .max = 1400000 },
 157         .n = { .min = 3, .max = 16 },
 158         .m = { .min = 96, .max = 140 },
 159         .m1 = { .min = 18, .max = 26 },
 160         .m2 = { .min = 6, .max = 16 },
 161         .p = { .min = 4, .max = 128 },
 162         .p1 = { .min = 1, .max = 6 },
 163         .p2 = { .dot_limit = 165000,
 164                 .p2_slow = 14, .p2_fast = 7 },
 165         .find_pll = intel_find_best_PLL,
 166 };
 167
 168 static const intel_limit_t intel_limits_i9xx_sdvo = {
 169         .dot = { .min = 20000, .max = 400000 },
 170         .vco = { .min = 1400000, .max = 2800000 },
 171         .n = { .min = 1, .max = 6 },
 172         .m = { .min = 70, .max = 120 },
 173         .m1 = { .min = 8, .max = 18 },
 174         .m2 = { .min = 3, .max = 7 },
 175         .p = { .min = 5, .max = 80 },
 176         .p1 = { .min = 1, .max = 8 },
 177         .p2 = { .dot_limit = 200000,
 178                 .p2_slow = 10, .p2_fast = 5 },
 179         .find_pll = intel_find_best_PLL,
 180 };
 181
 182 static const intel_limit_t intel_limits_i9xx_lvds = {
 183         .dot = { .min = 20000, .max = 400000 },
 184         .vco = { .min = 1400000, .max = 2800000 },
 185         .n = { .min = 1, .max = 6 },
 186         .m = { .min = 70, .max = 120 },
 187         .m1 = { .min = 8, .max = 18 },
 188         .m2 = { .min = 3, .max = 7 },
 189         .p = { .min = 7, .max = 98 },
 190         .p1 = { .min = 1, .max = 8 },
 191         .p2 = { .dot_limit = 112000,
 192                 .p2_slow = 14, .p2_fast = 7 },
 193         .find_pll = intel_find_best_PLL,
 194 };
 195
 196
 197 static const intel_limit_t intel_limits_g4x_sdvo = {
 198         .dot = { .min = 25000, .max = 270000 },
 199         .vco = { .min = 1750000, .max = 3500000},
 200         .n = { .min = 1, .max = 4 },
 201         .m = { .min = 104, .max = 138 },
 202         .m1 = { .min = 17, .max = 23 },
 203         .m2 = { .min = 5, .max = 11 },
 204         .p = { .min = 10, .max = 30 },
 205         .p1 = { .min = 1, .max = 3},
 206         .p2 = { .dot_limit = 270000,
 207                 .p2_slow = 10,
 208                 .p2_fast = 10
 209         },
 210         .find_pll = intel_g4x_find_best_PLL,
 211 };
 212
 213 static const intel_limit_t intel_limits_g4x_hdmi = {
 214         .dot = { .min = 22000, .max = 400000 },
 215         .vco = { .min = 1750000, .max = 3500000},
 216         .n = { .min = 1, .max = 4 },
 217         .m = { .min = 104, .max = 138 },
 218         .m1 = { .min = 16, .max = 23 },
 219         .m2 = { .min = 5, .max = 11 },
 220         .p = { .min = 5, .max = 80 },
 221         .p1 = { .min = 1, .max = 8},
 222         .p2 = { .dot_limit = 165000,
 223                 .p2_slow = 10, .p2_fast = 5 },
 224         .find_pll = intel_g4x_find_best_PLL,
 225 };
 226
 227 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
 228         .dot = { .min = 20000, .max = 115000 },
 229         .vco = { .min = 1750000, .max = 3500000 },
 230         .n = { .min = 1, .max = 3 },
 231         .m = { .min = 104, .max = 138 },
 232         .m1 = { .min = 17, .max = 23 },
 233         .m2 = { .min = 5, .max = 11 },
 234         .p = { .min = 28, .max = 112 },
 235         .p1 = { .min = 2, .max = 8 },
 236         .p2 = { .dot_limit = 0,
 237                 .p2_slow = 14, .p2_fast = 14
 238         },
 239         .find_pll = intel_g4x_find_best_PLL,
 240 };
 241
 242 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
 243         .dot = { .min = 80000, .max = 224000 },
 244         .vco = { .min = 1750000, .max = 3500000 },
 245         .n = { .min = 1, .max = 3 },
 246         .m = { .min = 104, .max = 138 },
 247         .m1 = { .min = 17, .max = 23 },
 248         .m2 = { .min = 5, .max = 11 },
 249         .p = { .min = 14, .max = 42 },
 250         .p1 = { .min = 2, .max = 6 },
 251         .p2 = { .dot_limit = 0,
 252                 .p2_slow = 7, .p2_fast = 7
 253         },
 254         .find_pll = intel_g4x_find_best_PLL,
 255 };
 256
 257 static const intel_limit_t intel_limits_g4x_display_port = {
 258         .dot = { .min = 161670, .max = 227000 },
 259         .vco = { .min = 1750000, .max = 3500000},
 260         .n = { .min = 1, .max = 2 },
 261         .m = { .min = 97, .max = 108 },
 262         .m1 = { .min = 0x10, .max = 0x12 },
 263         .m2 = { .min = 0x05, .max = 0x06 },
 264         .p = { .min = 10, .max = 20 },
 265         .p1 = { .min = 1, .max = 2},
 266         .p2 = { .dot_limit = 0,
 267                 .p2_slow = 10, .p2_fast = 10 },
 268         .find_pll = intel_find_pll_g4x_dp,
 269 };
 270
 271 static const intel_limit_t intel_limits_pineview_sdvo = {
 272         .dot = { .min = 20000, .max = 400000},
 273         .vco = { .min = 1700000, .max = 3500000 },
 274         /* Pineview's Ncounter is a ring counter */
 275         .n = { .min = 3, .max = 6 },
 276         .m = { .min = 2, .max = 256 },
 277         /* Pineview only has one combined m divider, which we treat as m2. */
 278         .m1 = { .min = 0, .max = 0 },
 279         .m2 = { .min = 0, .max = 254 },
 280         .p = { .min = 5, .max = 80 },
 281         .p1 = { .min = 1, .max = 8 },
 282         .p2 = { .dot_limit = 200000,
 283                 .p2_slow = 10, .p2_fast = 5 },
 284         .find_pll = intel_find_best_PLL,
 285 };
 286
 287 static const intel_limit_t intel_limits_pineview_lvds = {
 288         .dot = { .min = 20000, .max = 400000 },
 289         .vco = { .min = 1700000, .max = 3500000 },
 290         .n = { .min = 3, .max = 6 },
 291         .m = { .min = 2, .max = 256 },
 292         .m1 = { .min = 0, .max = 0 },
 293         .m2 = { .min = 0, .max = 254 },
 294         .p = { .min = 7, .max = 112 },
 295         .p1 = { .min = 1, .max = 8 },
 296         .p2 = { .dot_limit = 112000,
 297                 .p2_slow = 14, .p2_fast = 14 },
 298         .find_pll = intel_find_best_PLL,
 299 };
 300
 301 /* Ironlake / Sandybridge
 302  *
 303  * We calculate clock using (register_value + 2) for N/M1/M2, so here
 304  * the range value for them is (actual_value - 2).
 305  */
 306 static const intel_limit_t intel_limits_ironlake_dac = {
 307         .dot = { .min = 25000, .max = 350000 },
 308         .vco = { .min = 1760000, .max = 3510000 },
 309         .n = { .min = 1, .max = 5 },
 310         .m = { .min = 79, .max = 127 },
 311         .m1 = { .min = 12, .max = 22 },
 312         .m2 = { .min = 5, .max = 9 },
 313         .p = { .min = 5, .max = 80 },
 314         .p1 = { .min = 1, .max = 8 },
 315         .p2 = { .dot_limit = 225000,
 316                 .p2_slow = 10, .p2_fast = 5 },
 317         .find_pll = intel_g4x_find_best_PLL,
 318 };
 319
 320 static const intel_limit_t intel_limits_ironlake_single_lvds = {
 321         .dot = { .min = 25000, .max = 350000 },
 322         .vco = { .min = 1760000, .max = 3510000 },
 323         .n = { .min = 1, .max = 3 },
 324         .m = { .min = 79, .max = 118 },
 325         .m1 = { .min = 12, .max = 22 },
 326         .m2 = { .min = 5, .max = 9 },
 327         .p = { .min = 28, .max = 112 },
 328         .p1 = { .min = 2, .max = 8 },
 329         .p2 = { .dot_limit = 225000,
 330                 .p2_slow = 14, .p2_fast = 14 },
 331         .find_pll = intel_g4x_find_best_PLL,
 332 };
 333
 334 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
 335         .dot = { .min = 25000, .max = 350000 },
 336         .vco = { .min = 1760000, .max = 3510000 },
 337         .n = { .min = 1, .max = 3 },
 338         .m = { .min = 79, .max = 127 },
 339         .m1 = { .min = 12, .max = 22 },
 340         .m2 = { .min = 5, .max = 9 },
 341         .p = { .min = 14, .max = 56 },
 342         .p1 = { .min = 2, .max = 8 },
 343         .p2 = { .dot_limit = 225000,
 344                 .p2_slow = 7, .p2_fast = 7 },
 345         .find_pll = intel_g4x_find_best_PLL,
 346 };
 347
 348 /* LVDS 100mhz refclk limits. */
 349 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
 350         .dot = { .min = 25000, .max = 350000 },
 351         .vco = { .min = 1760000, .max = 3510000 },
 352         .n = { .min = 1, .max = 2 },
 353         .m = { .min = 79, .max = 126 },
 354         .m1 = { .min = 12, .max = 22 },
 355         .m2 = { .min = 5, .max = 9 },
 356         .p = { .min = 28, .max = 112 },
 357         .p1 = { .min = 2, .max = 8 },
 358         .p2 = { .dot_limit = 225000,
 359                 .p2_slow = 14, .p2_fast = 14 },
 360         .find_pll = intel_g4x_find_best_PLL,
 361 };
 362
 363 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
 364         .dot = { .min = 25000, .max = 350000 },
 365         .vco = { .min = 1760000, .max = 3510000 },
 366         .n = { .min = 1, .max = 3 },
 367         .m = { .min = 79, .max = 126 },
 368         .m1 = { .min = 12, .max = 22 },
 369         .m2 = { .min = 5, .max = 9 },
 370         .p = { .min = 14, .max = 42 },
 371         .p1 = { .min = 2, .max = 6 },
 372         .p2 = { .dot_limit = 225000,
 373                 .p2_slow = 7, .p2_fast = 7 },
 374         .find_pll = intel_g4x_find_best_PLL,
 375 };
 376
 377 static const intel_limit_t intel_limits_ironlake_display_port = {
 378         .dot = { .min = 25000, .max = 350000 },
 379         .vco = { .min = 1760000, .max = 3510000},
 380         .n = { .min = 1, .max = 2 },
 381         .m = { .min = 81, .max = 90 },
 382         .m1 = { .min = 12, .max = 22 },
 383         .m2 = { .min = 5, .max = 9 },
 384         .p = { .min = 10, .max = 20 },
 385         .p1 = { .min = 1, .max = 2},
 386         .p2 = { .dot_limit = 0,
 387                 .p2_slow = 10, .p2_fast = 10 },
 388         .find_pll = intel_find_pll_ironlake_dp,
 389 };
 390
 391 static const intel_limit_t intel_limits_vlv_dac = {
 392         .dot = { .min = 25000, .max = 270000 },
 393         .vco = { .min = 4000000, .max = 6000000 },
 394         .n = { .min = 1, .max = 7 },
 395         .m = { .min = 22, .max = 450 }, /* guess */
 396         .m1 = { .min = 2, .max = 3 },
 397         .m2 = { .min = 11, .max = 156 },
 398         .p = { .min = 10, .max = 30 },
 399         .p1 = { .min = 2, .max = 3 },
 400         .p2 = { .dot_limit = 270000,
 401                 .p2_slow = 2, .p2_fast = 20 },
 402         .find_pll = intel_vlv_find_best_pll,
 403 };
 404
 405 static const intel_limit_t intel_limits_vlv_hdmi = {
 406         .dot = { .min = 20000, .max = 165000 },
 407         .vco = { .min = 4000000, .max = 5994000},
 408         .n = { .min = 1, .max = 7 },
 409         .m = { .min = 60, .max = 300 }, /* guess */
 410         .m1 = { .min = 2, .max = 3 },
 411         .m2 = { .min = 11, .max = 156 },
 412         .p = { .min = 10, .max = 30 },
 413         .p1 = { .min = 2, .max = 3 },
 414         .p2 = { .dot_limit = 270000,
 415                 .p2_slow = 2, .p2_fast = 20 },
 416         .find_pll = intel_vlv_find_best_pll,
 417 };
 418
 419 static const intel_limit_t intel_limits_vlv_dp = {
 420         .dot = { .min = 25000, .max = 270000 },
 421         .vco = { .min = 4000000, .max = 6000000 },
 422         .n = { .min = 1, .max = 7 },
 423         .m = { .min = 22, .max = 450 },
 424         .m1 = { .min = 2, .max = 3 },
 425         .m2 = { .min = 11, .max = 156 },
 426         .p = { .min = 10, .max = 30 },
 427         .p1 = { .min = 2, .max = 3 },
 428         .p2 = { .dot_limit = 270000,
 429                 .p2_slow = 2, .p2_fast = 20 },
 430         .find_pll = intel_vlv_find_best_pll,
 431 };
 432
 433 u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
 434 {
 435         WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
 436
 437         if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
 438                 DRM_ERROR("DPIO idle wait timed out\n");
 439                 return 0;
 440         }
 441
 442         I915_WRITE(DPIO_REG, reg);
 443         I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
 444                    DPIO_BYTE);
 445         if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
 446                 DRM_ERROR("DPIO read wait timed out\n");
 447                 return 0;
 448         }
 449
 450         return I915_READ(DPIO_DATA);
 451 }
 452
 453 static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
 454                              u32 val)
 455 {
 456         WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
 457
 458         if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
 459                 DRM_ERROR("DPIO idle wait timed out\n");
 460                 return;
 461         }
 462
 463         I915_WRITE(DPIO_DATA, val);
 464         I915_WRITE(DPIO_REG, reg);
 465         I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
 466                    DPIO_BYTE);
 467         if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
 468                 DRM_ERROR("DPIO write wait timed out\n");
 469 }
 470
 471 static void vlv_init_dpio(struct drm_device *dev)
 472 {
 473         struct drm_i915_private *dev_priv = dev->dev_private;
 474
 475         /* Reset the DPIO config */
 476         I915_WRITE(DPIO_CTL, 0);
 477         POSTING_READ(DPIO_CTL);
 478         I915_WRITE(DPIO_CTL, 1);
 479         POSTING_READ(DPIO_CTL);
 480 }
 481
 482 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
 483                                                 int refclk)
 484 {
 485         struct drm_device *dev = crtc->dev;
 486         const intel_limit_t *limit;
 487
 488         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 489                 if (intel_is_dual_link_lvds(dev)) {
 490                         if (refclk == 100000)
 491                                 limit = &intel_limits_ironlake_dual_lvds_100m;
 492                         else
 493                                 limit = &intel_limits_ironlake_dual_lvds;
 494                 } else {
 495                         if (refclk == 100000)
 496                                 limit = &intel_limits_ironlake_single_lvds_100m;
 497                         else
 498                                 limit = &intel_limits_ironlake_single_lvds;
 499                 }
 500         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
 501                    intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
 502                 limit = &intel_limits_ironlake_display_port;
 503         else
 504                 limit = &intel_limits_ironlake_dac;
 505
 506         return limit;
 507 }
 508
 509 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 510 {
 511         struct drm_device *dev = crtc->dev;
 512         const intel_limit_t *limit;
 513
 514         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 515                 if (intel_is_dual_link_lvds(dev))
 516                         limit = &intel_limits_g4x_dual_channel_lvds;
 517                 else
 518                         limit = &intel_limits_g4x_single_channel_lvds;
 519         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
 520                    intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
 521                 limit = &intel_limits_g4x_hdmi;
 522         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
 523                 limit = &intel_limits_g4x_sdvo;
 524         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
 525                 limit = &intel_limits_g4x_display_port;
 526         } else /* The option is for other outputs */
 527                 limit = &intel_limits_i9xx_sdvo;
 528
 529         return limit;
 530 }
 531
 532 static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
 533 {
 534         struct drm_device *dev = crtc->dev;
 535         const intel_limit_t *limit;
 536
 537         if (HAS_PCH_SPLIT(dev))
 538                 limit = intel_ironlake_limit(crtc, refclk);
 539         else if (IS_G4X(dev)) {
 540                 limit = intel_g4x_limit(crtc);
 541         } else if (IS_PINEVIEW(dev)) {
 542                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 543                         limit = &intel_limits_pineview_lvds;
 544                 else
 545                         limit = &intel_limits_pineview_sdvo;
 546         } else if (IS_VALLEYVIEW(dev)) {
 547                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG))
 548                         limit = &intel_limits_vlv_dac;
 549                 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
 550                         limit = &intel_limits_vlv_hdmi;
 551                 else
 552                         limit = &intel_limits_vlv_dp;
 553         } else if (!IS_GEN2(dev)) {
 554                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 555                         limit = &intel_limits_i9xx_lvds;
 556                 else
 557                         limit = &intel_limits_i9xx_sdvo;
 558         } else {
 559                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 560                         limit = &intel_limits_i8xx_lvds;
 561                 else
 562                         limit = &intel_limits_i8xx_dvo;
 563         }
 564         return limit;
 565 }
 566
 567 /* m1 is reserved as 0 in Pineview, n is a ring counter */
 568 static void pineview_clock(int refclk, intel_clock_t *clock)
 569 {
 570         clock->m = clock->m2 + 2;
 571         clock->p = clock->p1 * clock->p2;
 572         clock->vco = refclk * clock->m / clock->n;
 573         clock->dot = clock->vco / clock->p;
 574 }
 575
 576 static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
 577 {
 578         if (IS_PINEVIEW(dev)) {
 579                 pineview_clock(refclk, clock);
 580                 return;
 581         }
 582         clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
 583         clock->p = clock->p1 * clock->p2;
 584         clock->vco = refclk * clock->m / (clock->n + 2);
 585         clock->dot = clock->vco / clock->p;
 586 }
 587
 588 /**
 589  * Returns whether any output on the specified pipe is of the specified type
 590  */
 591 bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
 592 {
 593         struct drm_device *dev = crtc->dev;
 594         struct intel_encoder *encoder;
 595
 596         for_each_encoder_on_crtc(dev, crtc, encoder)
 597                 if (encoder->type == type)
 598                         return true;
 599
 600         return false;
 601 }
 602
 603 #define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
 604 /**
 605  * Returns whether the given set of divisors are valid for a given refclk with
 606  * the given connectors.
 607  */
 608
 609 static bool intel_PLL_is_valid(struct drm_device *dev,
 610                                const intel_limit_t *limit,
 611                                const intel_clock_t *clock)
 612 {
 613         if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
 614                 INTELPllInvalid("p1 out of range\n");
 615         if (clock->p   < limit->p.min   || limit->p.max   < clock->p)
 616                 INTELPllInvalid("p out of range\n");
 617         if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
 618                 INTELPllInvalid("m2 out of range\n");
 619         if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
 620                 INTELPllInvalid("m1 out of range\n");
 621         if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
 622                 INTELPllInvalid("m1 <= m2\n");
 623         if (clock->m   < limit->m.min   || limit->m.max   < clock->m)
 624                 INTELPllInvalid("m out of range\n");
 625         if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
 626                 INTELPllInvalid("n out of range\n");
 627         if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
 628                 INTELPllInvalid("vco out of range\n");
 629         /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
 630          * connector, etc., rather than just a single range.
 631          */
 632         if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
 633                 INTELPllInvalid("dot out of range\n");
 634
 635         return true;
 636 }
 637
 638 static bool
 639 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 640                     int target, int refclk, intel_clock_t *match_clock,
 641                     intel_clock_t *best_clock)
 642
 643 {
 644         struct drm_device *dev = crtc->dev;
 645         intel_clock_t clock;
 646         int err = target;
 647
 648         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 649                 /*
 650                  * For LVDS just rely on its current settings for dual-channel.
 651                  * We haven't figured out how to reliably set up different
 652                  * single/dual channel state, if we even can.
 653                  */
 654                 if (intel_is_dual_link_lvds(dev))
 655                         clock.p2 = limit->p2.p2_fast;
 656                 else
 657                         clock.p2 = limit->p2.p2_slow;
 658         } else {
 659                 if (target < limit->p2.dot_limit)
 660                         clock.p2 = limit->p2.p2_slow;
 661                 else
 662                         clock.p2 = limit->p2.p2_fast;
 663         }
 664
 665         memset(best_clock, 0, sizeof(*best_clock));
 666
 667         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
 668              clock.m1++) {
 669                 for (clock.m2 = limit->m2.min;
 670                      clock.m2 <= limit->m2.max; clock.m2++) {
 671                         /* m1 is always 0 in Pineview */
 672                         if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
 673                                 break;
 674                         for (clock.n = limit->n.min;
 675                              clock.n <= limit->n.max; clock.n++) {
 676                                 for (clock.p1 = limit->p1.min;
 677                                         clock.p1 <= limit->p1.max; clock.p1++) {
 678                                         int this_err;
 679
 680                                         intel_clock(dev, refclk, &clock);
 681                                         if (!intel_PLL_is_valid(dev, limit,
 682                                                                 &clock))
 683                                                 continue;
 684                                         if (match_clock &&
 685                                             clock.p != match_clock->p)
 686                                                 continue;
 687
 688                                         this_err = abs(clock.dot - target);
 689                                         if (this_err < err) {
 690                                                 *best_clock = clock;
 691                                                 err = this_err;
 692                                         }
 693                                 }
 694                         }
 695                 }
 696         }
 697
 698         return (err != target);
 699 }
 700
 701 static bool
 702 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 703                         int target, int refclk, intel_clock_t *match_clock,
 704                         intel_clock_t *best_clock)
 705 {
 706         struct drm_device *dev = crtc->dev;
 707         intel_clock_t clock;
 708         int max_n;
 709         bool found;
 710         /* approximately equals target * 0.00585 */
 711         int err_most = (target >> 8) + (target >> 9);
 712         found = false;
 713
 714         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 715                 int lvds_reg;
 716
 717                 if (HAS_PCH_SPLIT(dev))
 718                         lvds_reg = PCH_LVDS;
 719                 else
 720                         lvds_reg = LVDS;
 721                 if (intel_is_dual_link_lvds(dev))
 722                         clock.p2 = limit->p2.p2_fast;
 723                 else
 724                         clock.p2 = limit->p2.p2_slow;
 725         } else {
 726                 if (target < limit->p2.dot_limit)
 727                         clock.p2 = limit->p2.p2_slow;
 728                 else
 729                         clock.p2 = limit->p2.p2_fast;
 730         }
 731
 732         memset(best_clock, 0, sizeof(*best_clock));
 733         max_n = limit->n.max;
 734         /* based on hardware requirement, prefer smaller n to precision */
 735         for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
 736                 /* based on hardware requirement, prefere larger m1,m2 */
 737                 for (clock.m1 = limit->m1.max;
 738                      clock.m1 >= limit->m1.min; clock.m1--) {
 739                         for (clock.m2 = limit->m2.max;
 740                              clock.m2 >= limit->m2.min; clock.m2--) {
 741                                 for (clock.p1 = limit->p1.max;
 742                                      clock.p1 >= limit->p1.min; clock.p1--) {
 743                                         int this_err;
 744
 745                                         intel_clock(dev, refclk, &clock);
 746                                         if (!intel_PLL_is_valid(dev, limit,
 747                                                                 &clock))
 748                                                 continue;
 749                                         if (match_clock &&
 750                                             clock.p != match_clock->p)
 751                                                 continue;
 752
 753                                         this_err = abs(clock.dot - target);
 754                                         if (this_err < err_most) {
 755                                                 *best_clock = clock;
 756                                                 err_most = this_err;
 757                                                 max_n = clock.n;
 758                                                 found = true;
 759                                         }
 760                                 }
 761                         }
 762                 }
 763         }
 764         return found;
 765 }
 766
 767 static bool
 768 intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
 769                            int target, int refclk, intel_clock_t *match_clock,
 770                            intel_clock_t *best_clock)
 771 {
 772         struct drm_device *dev = crtc->dev;
 773         intel_clock_t clock;
 774
 775         if (target < 200000) {
 776                 clock.n = 1;
 777                 clock.p1 = 2;
 778                 clock.p2 = 10;
 779                 clock.m1 = 12;
 780                 clock.m2 = 9;
 781         } else {
 782                 clock.n = 2;
 783                 clock.p1 = 1;
 784                 clock.p2 = 10;
 785                 clock.m1 = 14;
 786                 clock.m2 = 8;
 787         }
 788         intel_clock(dev, refclk, &clock);
 789         memcpy(best_clock, &clock, sizeof(intel_clock_t));
 790         return true;
 791 }
 792
 793 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
 794 static bool
 795 intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
 796                       int target, int refclk, intel_clock_t *match_clock,
 797                       intel_clock_t *best_clock)
 798 {
 799         intel_clock_t clock;
 800         if (target < 200000) {
 801                 clock.p1 = 2;
 802                 clock.p2 = 10;
 803                 clock.n = 2;
 804                 clock.m1 = 23;
 805                 clock.m2 = 8;
 806         } else {
 807                 clock.p1 = 1;
 808                 clock.p2 = 10;
 809                 clock.n = 1;
 810                 clock.m1 = 14;
 811                 clock.m2 = 2;
 812         }
 813         clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
 814         clock.p = (clock.p1 * clock.p2);
 815         clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
 816         clock.vco = 0;
 817         memcpy(best_clock, &clock, sizeof(intel_clock_t));
 818         return true;
 819 }
 820 static bool
 821 intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
 822                         int target, int refclk, intel_clock_t *match_clock,
 823                         intel_clock_t *best_clock)
 824 {
 825         u32 p1, p2, m1, m2, vco, bestn, bestm1, bestm2, bestp1, bestp2;
 826         u32 m, n, fastclk;
 827         u32 updrate, minupdate, fracbits, p;
 828         unsigned long bestppm, ppm, absppm;
 829         int dotclk, flag;
 830
 831         flag = 0;
 832         dotclk = target * 1000;
 833         bestppm = 1000000;
 834         ppm = absppm = 0;
 835         fastclk = dotclk / (2*100);
 836         updrate = 0;
 837         minupdate = 19200;
 838         fracbits = 1;
 839         n = p = p1 = p2 = m = m1 = m2 = vco = bestn = 0;
 840         bestm1 = bestm2 = bestp1 = bestp2 = 0;
 841
 842         /* based on hardware requirement, prefer smaller n to precision */
 843         for (n = limit->n.min; n <= ((refclk) / minupdate); n++) {
 844                 updrate = refclk / n;
 845                 for (p1 = limit->p1.max; p1 > limit->p1.min; p1--) {
 846                         for (p2 = limit->p2.p2_fast+1; p2 > 0; p2--) {
 847                                 if (p2 > 10)
 848                                         p2 = p2 - 1;
 849                                 p = p1 * p2;
 850                                 /* based on hardware requirement, prefer bigger m1,m2 values */
 851                                 for (m1 = limit->m1.min; m1 <= limit->m1.max; m1++) {
 852                                         m2 = (((2*(fastclk * p * n / m1 )) +
 853                                                refclk) / (2*refclk));
 854                                         m = m1 * m2;
 855                                         vco = updrate * m;
 856                                         if (vco >= limit->vco.min && vco < limit->vco.max) {
 857                                                 ppm = 1000000 * ((vco / p) - fastclk) / fastclk;
 858                                                 absppm = (ppm > 0) ? ppm : (-ppm);
 859                                                 if (absppm < 100 && ((p1 * p2) > (bestp1 * bestp2))) {
 860                                                         bestppm = 0;
 861                                                         flag = 1;
 862                                                 }
 863                                                 if (absppm < bestppm - 10) {
 864                                                         bestppm = absppm;
 865                                                         flag = 1;
 866                                                 }
 867                                                 if (flag) {
 868                                                         bestn = n;
 869                                                         bestm1 = m1;
 870                                                         bestm2 = m2;
 871                                                         bestp1 = p1;
 872                                                         bestp2 = p2;
 873                                                         flag = 0;
 874                                                 }
 875                                         }
 876                                 }
 877                         }
 878                 }
 879         }
 880         best_clock->n = bestn;
 881         best_clock->m1 = bestm1;
 882         best_clock->m2 = bestm2;
 883         best_clock->p1 = bestp1;
 884         best_clock->p2 = bestp2;
 885
 886         return true;
 887 }
 888
 889 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
 890                                              enum pipe pipe)
 891 {
 892         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
 893         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 894
 895         return intel_crtc->config.cpu_transcoder;
 896 }
 897
 898 static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe)
 899 {
 900         struct drm_i915_private *dev_priv = dev->dev_private;
 901         u32 frame, frame_reg = PIPEFRAME(pipe);
 902
 903         frame = I915_READ(frame_reg);
 904
 905         if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
 906                 DRM_DEBUG_KMS("vblank wait timed out\n");
 907 }
 908
 909 /**
 910  * intel_wait_for_vblank - wait for vblank on a given pipe
 911  * @dev: drm device
 912  * @pipe: pipe to wait for
 913  *
 914  * Wait for vblank to occur on a given pipe.  Needed for various bits of
 915  * mode setting code.
 916  */
 917 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
 918 {
 919         struct drm_i915_private *dev_priv = dev->dev_private;
 920         int pipestat_reg = PIPESTAT(pipe);
 921
 922         if (INTEL_INFO(dev)->gen >= 5) {
 923                 ironlake_wait_for_vblank(dev, pipe);
 924                 return;
 925         }
 926
 927         /* Clear existing vblank status. Note this will clear any other
 928          * sticky status fields as well.
 929          *
 930          * This races with i915_driver_irq_handler() with the result
 931          * that either function could miss a vblank event.  Here it is not
 932          * fatal, as we will either wait upon the next vblank interrupt or
 933          * timeout.  Generally speaking intel_wait_for_vblank() is only
 934          * called during modeset at which time the GPU should be idle and
 935          * should *not* be performing page flips and thus not waiting on
 936          * vblanks...
 937          * Currently, the result of us stealing a vblank from the irq
 938          * handler is that a single frame will be skipped during swapbuffers.
 939          */
 940         I915_WRITE(pipestat_reg,
 941                    I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
 942
 943         /* Wait for vblank interrupt bit to set */
 944         if (wait_for(I915_READ(pipestat_reg) &
 945                      PIPE_VBLANK_INTERRUPT_STATUS,
 946                      50))
 947                 DRM_DEBUG_KMS("vblank wait timed out\n");
 948 }
 949
 950 /*
 951  * intel_wait_for_pipe_off - wait for pipe to turn off
 952  * @dev: drm device
 953  * @pipe: pipe to wait for
 954  *
 955  * After disabling a pipe, we can't wait for vblank in the usual way,
 956  * spinning on the vblank interrupt status bit, since we won't actually
 957  * see an interrupt when the pipe is disabled.
 958  *
 959  * On Gen4 and above:
 960  *   wait for the pipe register state bit to turn off
 961  *
 962  * Otherwise:
 963  *   wait for the display line value to settle (it usually
 964  *   ends up stopping at the start of the next frame).
 965  *
 966  */
 967 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 968 {
 969         struct drm_i915_private *dev_priv = dev->dev_private;
 970         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 971                                                                       pipe);
 972
 973         if (INTEL_INFO(dev)->gen >= 4) {
 974                 int reg = PIPECONF(cpu_transcoder);
 975
 976                 /* Wait for the Pipe State to go off */
 977                 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
 978                              100))
 979                         WARN(1, "pipe_off wait timed out\n");
 980         } else {
 981                 u32 last_line, line_mask;
 982                 int reg = PIPEDSL(pipe);
 983                 unsigned long timeout = jiffies + msecs_to_jiffies(100);
 984
 985                 if (IS_GEN2(dev))
 986                         line_mask = DSL_LINEMASK_GEN2;
 987                 else
 988                         line_mask = DSL_LINEMASK_GEN3;
 989
 990                 /* Wait for the display line to settle */
 991                 do {
 992                         last_line = I915_READ(reg) & line_mask;
 993                         mdelay(5);
 994                 } while (((I915_READ(reg) & line_mask) != last_line) &&
 995                          time_after(timeout, jiffies));
 996                 if (time_after(jiffies, timeout))
 997                         WARN(1, "pipe_off wait timed out\n");
 998         }
 999 }
1000
1001 /*
1002  * ibx_digital_port_connected - is the specified port connected?
1003  * @dev_priv: i915 private structure
1004  * @port: the port to test
1005  *
1006  * Returns true if @port is connected, false otherwise.
1007  */
1008 bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
1009                                 struct intel_digital_port *port)
1010 {
1011         u32 bit;
1012
1013         if (HAS_PCH_IBX(dev_priv->dev)) {
1014                 switch(port->port) {
1015                 case PORT_B:
1016                         bit = SDE_PORTB_HOTPLUG;
1017                         break;
1018                 case PORT_C:
1019                         bit = SDE_PORTC_HOTPLUG;
1020                         break;
1021                 case PORT_D:
1022                         bit = SDE_PORTD_HOTPLUG;
1023                         break;
1024                 default:
1025                         return true;
1026                 }
1027         } else {
1028                 switch(port->port) {
1029                 case PORT_B:
1030                         bit = SDE_PORTB_HOTPLUG_CPT;
1031                         break;
1032                 case PORT_C:
1033                         bit = SDE_PORTC_HOTPLUG_CPT;
1034                         break;
1035                 case PORT_D:
1036                         bit = SDE_PORTD_HOTPLUG_CPT;
1037                         break;
1038                 default:
1039                         return true;
1040                 }
1041         }
1042
1043         return I915_READ(SDEISR) & bit;
1044 }
1045
1046 static const char *state_string(bool enabled)
1047 {
1048         return enabled ? "on" : "off";
1049 }
1050
1051 /* Only for pre-ILK configs */
1052 static void assert_pll(struct drm_i915_private *dev_priv,
1053                        enum pipe pipe, bool state)
1054 {
1055         int reg;
1056         u32 val;
1057         bool cur_state;
1058
1059         reg = DPLL(pipe);
1060         val = I915_READ(reg);
1061         cur_state = !!(val & DPLL_VCO_ENABLE);
1062         WARN(cur_state != state,
1063              "PLL state assertion failure (expected %s, current %s)\n",
1064              state_string(state), state_string(cur_state));
1065 }
1066 #define assert_pll_enabled(d, p) assert_pll(d, p, true)
1067 #define assert_pll_disabled(d, p) assert_pll(d, p, false)
1068
1069 /* For ILK+ */
1070 static void assert_pch_pll(struct drm_i915_private *dev_priv,
1071                            struct intel_pch_pll *pll,
1072                            struct intel_crtc *crtc,
1073                            bool state)
1074 {
1075         u32 val;
1076         bool cur_state;
1077
1078         if (HAS_PCH_LPT(dev_priv->dev)) {
1079                 DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
1080                 return;
1081         }
1082
1083         if (WARN (!pll,
1084                   "asserting PCH PLL %s with no PLL\n", state_string(state)))
1085                 return;
1086
1087         val = I915_READ(pll->pll_reg);
1088         cur_state = !!(val & DPLL_VCO_ENABLE);
1089         WARN(cur_state != state,
1090              "PCH PLL state for reg %x assertion failure (expected %s, current %s), val=%08x\n",
1091              pll->pll_reg, state_string(state), state_string(cur_state), val);
1092
1093         /* Make sure the selected PLL is correctly attached to the transcoder */
1094         if (crtc && HAS_PCH_CPT(dev_priv->dev)) {
1095                 u32 pch_dpll;
1096
1097                 pch_dpll = I915_READ(PCH_DPLL_SEL);
1098                 cur_state = pll->pll_reg == _PCH_DPLL_B;
1099                 if (!WARN(((pch_dpll >> (4 * crtc->pipe)) & 1) != cur_state,
1100                           "PLL[%d] not attached to this transcoder %d: %08x\n",
1101                           cur_state, crtc->pipe, pch_dpll)) {
1102                         cur_state = !!(val >> (4*crtc->pipe + 3));
1103                         WARN(cur_state != state,
1104                              "PLL[%d] not %s on this transcoder %d: %08x\n",
1105                              pll->pll_reg == _PCH_DPLL_B,
1106                              state_string(state),
1107                              crtc->pipe,
1108                              val);
1109                 }
1110         }
1111 }
1112 #define assert_pch_pll_enabled(d, p, c) assert_pch_pll(d, p, c, true)
1113 #define assert_pch_pll_disabled(d, p, c) assert_pch_pll(d, p, c, false)
1114
1115 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1116                           enum pipe pipe, bool state)
1117 {
1118         int reg;
1119         u32 val;
1120         bool cur_state;
1121         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1122                                                                       pipe);
1123
1124         if (HAS_DDI(dev_priv->dev)) {
1125                 /* DDI does not have a specific FDI_TX register */
1126                 reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
1127                 val = I915_READ(reg);
1128                 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1129         } else {
1130                 reg = FDI_TX_CTL(pipe);
1131                 val = I915_READ(reg);
1132                 cur_state = !!(val & FDI_TX_ENABLE);
1133         }
1134         WARN(cur_state != state,
1135              "FDI TX state assertion failure (expected %s, current %s)\n",
1136              state_string(state), state_string(cur_state));
1137 }
1138 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1139 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1140
1141 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1142                           enum pipe pipe, bool state)
1143 {
1144         int reg;
1145         u32 val;
1146         bool cur_state;
1147
1148         reg = FDI_RX_CTL(pipe);
1149         val = I915_READ(reg);
1150         cur_state = !!(val & FDI_RX_ENABLE);
1151         WARN(cur_state != state,
1152              "FDI RX state assertion failure (expected %s, current %s)\n",
1153              state_string(state), state_string(cur_state));
1154 }
1155 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1156 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1157
1158 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1159                                       enum pipe pipe)
1160 {
1161         int reg;
1162         u32 val;
1163
1164         /* ILK FDI PLL is always enabled */
1165         if (dev_priv->info->gen == 5)
1166                 return;
1167
1168         /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1169         if (HAS_DDI(dev_priv->dev))
1170                 return;
1171
1172         reg = FDI_TX_CTL(pipe);
1173         val = I915_READ(reg);
1174         WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1175 }
1176
1177 static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
1178                                       enum pipe pipe)
1179 {
1180         int reg;
1181         u32 val;
1182
1183         reg = FDI_RX_CTL(pipe);
1184         val = I915_READ(reg);
1185         WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
1186 }
1187
1188 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1189                                   enum pipe pipe)
1190 {
1191         int pp_reg, lvds_reg;
1192         u32 val;
1193         enum pipe panel_pipe = PIPE_A;
1194         bool locked = true;
1195
1196         if (HAS_PCH_SPLIT(dev_priv->dev)) {
1197                 pp_reg = PCH_PP_CONTROL;
1198                 lvds_reg = PCH_LVDS;
1199         } else {
1200                 pp_reg = PP_CONTROL;
1201                 lvds_reg = LVDS;
1202         }
1203
1204         val = I915_READ(pp_reg);
1205         if (!(val & PANEL_POWER_ON) ||
1206             ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
1207                 locked = false;
1208
1209         if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
1210                 panel_pipe = PIPE_B;
1211
1212         WARN(panel_pipe == pipe && locked,
1213              "panel assertion failure, pipe %c regs locked\n",
1214              pipe_name(pipe));
1215 }
1216
1217 void assert_pipe(struct drm_i915_private *dev_priv,
1218                  enum pipe pipe, bool state)
1219 {
1220         int reg;
1221         u32 val;
1222         bool cur_state;
1223         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1224                                                                       pipe);
1225
1226         /* if we need the pipe A quirk it must be always on */
1227         if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
1228                 state = true;
1229
1230         if (!intel_using_power_well(dev_priv->dev) &&
1231             cpu_transcoder != TRANSCODER_EDP) {
1232                 cur_state = false;
1233         } else {
1234                 reg = PIPECONF(cpu_transcoder);
1235                 val = I915_READ(reg);
1236                 cur_state = !!(val & PIPECONF_ENABLE);
1237         }
1238
1239         WARN(cur_state != state,
1240              "pipe %c assertion failure (expected %s, current %s)\n",
1241              pipe_name(pipe), state_string(state), state_string(cur_state));
1242 }
1243
1244 static void assert_plane(struct drm_i915_private *dev_priv,
1245                          enum plane plane, bool state)
1246 {
1247         int reg;
1248         u32 val;
1249         bool cur_state;
1250
1251         reg = DSPCNTR(plane);
1252         val = I915_READ(reg);
1253         cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1254         WARN(cur_state != state,
1255              "plane %c assertion failure (expected %s, current %s)\n",
1256              plane_name(plane), state_string(state), state_string(cur_state));
1257 }
1258
1259 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1260 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1261
1262 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1263                                    enum pipe pipe)
1264 {
1265         int reg, i;
1266         u32 val;
1267         int cur_pipe;
1268
1269         /* Planes are fixed to pipes on ILK+ */
1270         if (HAS_PCH_SPLIT(dev_priv->dev) || IS_VALLEYVIEW(dev_priv->dev)) {
1271                 reg = DSPCNTR(pipe);
1272                 val = I915_READ(reg);
1273                 WARN((val & DISPLAY_PLANE_ENABLE),
1274                      "plane %c assertion failure, should be disabled but not\n",
1275                      plane_name(pipe));
1276                 return;
1277         }
1278
1279         /* Need to check both planes against the pipe */
1280         for (i = 0; i < 2; i++) {
1281                 reg = DSPCNTR(i);
1282                 val = I915_READ(reg);
1283                 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1284                         DISPPLANE_SEL_PIPE_SHIFT;
1285                 WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1286                      "plane %c assertion failure, should be off on pipe %c but is still active\n",
1287                      plane_name(i), pipe_name(pipe));
1288         }
1289 }
1290
1291 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1292                                     enum pipe pipe)
1293 {
1294         int reg, i;
1295         u32 val;
1296
1297         if (!IS_VALLEYVIEW(dev_priv->dev))
1298                 return;
1299
1300         /* Need to check both planes against the pipe */
1301         for (i = 0; i < dev_priv->num_plane; i++) {
1302                 reg = SPCNTR(pipe, i);
1303                 val = I915_READ(reg);
1304                 WARN((val & SP_ENABLE),
1305                      "sprite %d assertion failure, should be off on pipe %c but is still active\n",
1306                      pipe * 2 + i, pipe_name(pipe));
1307         }
1308 }
1309
1310 static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1311 {
1312         u32 val;
1313         bool enabled;
1314
1315         if (HAS_PCH_LPT(dev_priv->dev)) {
1316                 DRM_DEBUG_DRIVER("LPT does not has PCH refclk, skipping check\n");
1317                 return;
1318         }
1319
1320         val = I915_READ(PCH_DREF_CONTROL);
1321         enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1322                             DREF_SUPERSPREAD_SOURCE_MASK));
1323         WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1324 }
1325
1326 static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
1327                                        enum pipe pipe)
1328 {
1329         int reg;
1330         u32 val;
1331         bool enabled;
1332
1333         reg = TRANSCONF(pipe);
1334         val = I915_READ(reg);
1335         enabled = !!(val & TRANS_ENABLE);
1336         WARN(enabled,
1337              "transcoder assertion failed, should be off on pipe %c but is still active\n",
1338              pipe_name(pipe));
1339 }
1340
1341 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1342                             enum pipe pipe, u32 port_sel, u32 val)
1343 {
1344         if ((val & DP_PORT_EN) == 0)
1345                 return false;
1346
1347         if (HAS_PCH_CPT(dev_priv->dev)) {
1348                 u32     trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1349                 u32     trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1350                 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1351                         return false;
1352         } else {
1353                 if ((val & DP_PIPE_MASK) != (pipe << 30))
1354                         return false;
1355         }
1356         return true;
1357 }
1358
1359 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1360                               enum pipe pipe, u32 val)
1361 {
1362         if ((val & SDVO_ENABLE) == 0)
1363                 return false;
1364
1365         if (HAS_PCH_CPT(dev_priv->dev)) {
1366                 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1367                         return false;
1368         } else {
1369                 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1370                         return false;
1371         }
1372         return true;
1373 }
1374
1375 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1376                               enum pipe pipe, u32 val)
1377 {
1378         if ((val & LVDS_PORT_EN) == 0)
1379                 return false;
1380
1381         if (HAS_PCH_CPT(dev_priv->dev)) {
1382                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1383                         return false;
1384         } else {
1385                 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1386                         return false;
1387         }
1388         return true;
1389 }
1390
1391 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1392                               enum pipe pipe, u32 val)
1393 {
1394         if ((val & ADPA_DAC_ENABLE) == 0)
1395                 return false;
1396         if (HAS_PCH_CPT(dev_priv->dev)) {
1397                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1398                         return false;
1399         } else {
1400                 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1401                         return false;
1402         }
1403         return true;
1404 }
1405
1406 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1407                                    enum pipe pipe, int reg, u32 port_sel)
1408 {
1409         u32 val = I915_READ(reg);
1410         WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1411              "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1412              reg, pipe_name(pipe));
1413
1414         WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
1415              && (val & DP_PIPEB_SELECT),
1416              "IBX PCH dp port still using transcoder B\n");
1417 }
1418
1419 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1420                                      enum pipe pipe, int reg)
1421 {
1422         u32 val = I915_READ(reg);
1423         WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1424              "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1425              reg, pipe_name(pipe));
1426
1427         WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
1428              && (val & SDVO_PIPE_B_SELECT),
1429              "IBX PCH hdmi port still using transcoder B\n");
1430 }
1431
1432 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1433                                       enum pipe pipe)
1434 {
1435         int reg;
1436         u32 val;
1437
1438         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1439         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1440         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1441
1442         reg = PCH_ADPA;
1443         val = I915_READ(reg);
1444         WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1445              "PCH VGA enabled on transcoder %c, should be disabled\n",
1446              pipe_name(pipe));
1447
1448         reg = PCH_LVDS;
1449         val = I915_READ(reg);
1450         WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1451              "PCH LVDS enabled on transcoder %c, should be disabled\n",
1452              pipe_name(pipe));
1453
1454         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1455         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1456         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1457 }
1458
1459 /**
1460  * intel_enable_pll - enable a PLL
1461  * @dev_priv: i915 private structure
1462  * @pipe: pipe PLL to enable
1463  *
1464  * Enable @pipe's PLL so we can start pumping pixels from a plane.  Check to
1465  * make sure the PLL reg is writable first though, since the panel write
1466  * protect mechanism may be enabled.
1467  *
1468  * Note!  This is for pre-ILK only.
1469  *
1470  * Unfortunately needed by dvo_ns2501 since the dvo depends on it running.
1471  */
1472 static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1473 {
1474         int reg;
1475         u32 val;
1476
1477         /* No really, not for ILK+ */
1478         BUG_ON(!IS_VALLEYVIEW(dev_priv->dev) && dev_priv->info->gen >= 5);
1479
1480         /* PLL is protected by panel, make sure we can write it */
1481         if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
1482                 assert_panel_unlocked(dev_priv, pipe);
1483
1484         reg = DPLL(pipe);
1485         val = I915_READ(reg);
1486         val |= DPLL_VCO_ENABLE;
1487
1488         /* We do this three times for luck */
1489         I915_WRITE(reg, val);
1490         POSTING_READ(reg);
1491         udelay(150); /* wait for warmup */
1492         I915_WRITE(reg, val);
1493         POSTING_READ(reg);
1494         udelay(150); /* wait for warmup */
1495         I915_WRITE(reg, val);
1496         POSTING_READ(reg);
1497         udelay(150); /* wait for warmup */
1498 }
1499
1500 /**
1501  * intel_disable_pll - disable a PLL
1502  * @dev_priv: i915 private structure
1503  * @pipe: pipe PLL to disable
1504  *
1505  * Disable the PLL for @pipe, making sure the pipe is off first.
1506  *
1507  * Note!  This is for pre-ILK only.
1508  */
1509 static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1510 {
1511         int reg;
1512         u32 val;
1513
1514         /* Don't disable pipe A or pipe A PLLs if needed */
1515         if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1516                 return;
1517
1518         /* Make sure the pipe isn't still relying on us */
1519         assert_pipe_disabled(dev_priv, pipe);
1520
1521         reg = DPLL(pipe);
1522         val = I915_READ(reg);
1523         val &= ~DPLL_VCO_ENABLE;
1524         I915_WRITE(reg, val);
1525         POSTING_READ(reg);
1526 }
1527
1528 /* SBI access */
1529 static void
1530 intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
1531                 enum intel_sbi_destination destination)
1532 {
1533         u32 tmp;
1534
1535         WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
1536
1537         if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
1538                                 100)) {
1539                 DRM_ERROR("timeout waiting for SBI to become ready\n");
1540                 return;
1541         }
1542
1543         I915_WRITE(SBI_ADDR, (reg << 16));
1544         I915_WRITE(SBI_DATA, value);
1545
1546         if (destination == SBI_ICLK)
1547                 tmp = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRWR;
1548         else
1549                 tmp = SBI_CTL_DEST_MPHY | SBI_CTL_OP_IOWR;
1550         I915_WRITE(SBI_CTL_STAT, SBI_BUSY | tmp);
1551
1552         if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
1553                                 100)) {
1554                 DRM_ERROR("timeout waiting for SBI to complete write transaction\n");
1555                 return;
1556         }
1557 }
1558
1559 static u32
1560 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
1561                enum intel_sbi_destination destination)
1562 {
1563         u32 value = 0;
1564         WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
1565
1566         if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
1567                                 100)) {
1568                 DRM_ERROR("timeout waiting for SBI to become ready\n");
1569                 return 0;
1570         }
1571
1572         I915_WRITE(SBI_ADDR, (reg << 16));
1573
1574         if (destination == SBI_ICLK)
1575                 value = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRRD;
1576         else
1577                 value = SBI_CTL_DEST_MPHY | SBI_CTL_OP_IORD;
1578         I915_WRITE(SBI_CTL_STAT, value | SBI_BUSY);
1579
1580         if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
1581                                 100)) {
1582                 DRM_ERROR("timeout waiting for SBI to complete read transaction\n");
1583                 return 0;
1584         }
1585
1586         return I915_READ(SBI_DATA);
1587 }
1588
1589 /**
1590  * ironlake_enable_pch_pll - enable PCH PLL
1591  * @dev_priv: i915 private structure
1592  * @pipe: pipe PLL to enable
1593  *
1594  * The PCH PLL needs to be enabled before the PCH transcoder, since it
1595  * drives the transcoder clock.
1596  */
1597 static void ironlake_enable_pch_pll(struct intel_crtc *intel_crtc)
1598 {
1599         struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
1600         struct intel_pch_pll *pll;
1601         int reg;
1602         u32 val;
1603
1604         /* PCH PLLs only available on ILK, SNB and IVB */
1605         BUG_ON(dev_priv->info->gen < 5);
1606         pll = intel_crtc->pch_pll;
1607         if (pll == NULL)
1608                 return;
1609
1610         if (WARN_ON(pll->refcount == 0))
1611                 return;
1612
1613         DRM_DEBUG_KMS("enable PCH PLL %x (active %d, on? %d)for crtc %d\n",
1614                       pll->pll_reg, pll->active, pll->on,
1615                       intel_crtc->base.base.id);
1616
1617         /* PCH refclock must be enabled first */
1618         assert_pch_refclk_enabled(dev_priv);
1619
1620         if (pll->active++ && pll->on) {
1621                 assert_pch_pll_enabled(dev_priv, pll, NULL);
1622                 return;
1623         }
1624
1625         DRM_DEBUG_KMS("enabling PCH PLL %x\n", pll->pll_reg);
1626
1627         reg = pll->pll_reg;
1628         val = I915_READ(reg);
1629         val |= DPLL_VCO_ENABLE;
1630         I915_WRITE(reg, val);
1631         POSTING_READ(reg);
1632         udelay(200);
1633
1634         pll->on = true;
1635 }
1636
1637 static void intel_disable_pch_pll(struct intel_crtc *intel_crtc)
1638 {
1639         struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
1640         struct intel_pch_pll *pll = intel_crtc->pch_pll;
1641         int reg;
1642         u32 val;
1643
1644         /* PCH only available on ILK+ */
1645         BUG_ON(dev_priv->info->gen < 5);
1646         if (pll == NULL)
1647                return;
1648
1649         if (WARN_ON(pll->refcount == 0))
1650                 return;
1651
1652         DRM_DEBUG_KMS("disable PCH PLL %x (active %d, on? %d) for crtc %d\n",
1653                       pll->pll_reg, pll->active, pll->on,
1654                       intel_crtc->base.base.id);
1655
1656         if (WARN_ON(pll->active == 0)) {
1657                 assert_pch_pll_disabled(dev_priv, pll, NULL);
1658                 return;
1659         }
1660
1661         if (--pll->active) {
1662                 assert_pch_pll_enabled(dev_priv, pll, NULL);
1663                 return;
1664         }
1665
1666         DRM_DEBUG_KMS("disabling PCH PLL %x\n", pll->pll_reg);
1667
1668         /* Make sure transcoder isn't still depending on us */
1669         assert_transcoder_disabled(dev_priv, intel_crtc->pipe);
1670
1671         reg = pll->pll_reg;
1672         val = I915_READ(reg);
1673         val &= ~DPLL_VCO_ENABLE;
1674         I915_WRITE(reg, val);
1675         POSTING_READ(reg);
1676         udelay(200);
1677
1678         pll->on = false;
1679 }
1680
1681 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1682                                            enum pipe pipe)
1683 {
1684         struct drm_device *dev = dev_priv->dev;
1685         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1686         uint32_t reg, val, pipeconf_val;
1687
1688         /* PCH only available on ILK+ */
1689         BUG_ON(dev_priv->info->gen < 5);
1690
1691         /* Make sure PCH DPLL is enabled */
1692         assert_pch_pll_enabled(dev_priv,
1693                                to_intel_crtc(crtc)->pch_pll,
1694                                to_intel_crtc(crtc));
1695
1696         /* FDI must be feeding us bits for PCH ports */
1697         assert_fdi_tx_enabled(dev_priv, pipe);
1698         assert_fdi_rx_enabled(dev_priv, pipe);
1699
1700         if (HAS_PCH_CPT(dev)) {
1701                 /* Workaround: Set the timing override bit before enabling the
1702                  * pch transcoder. */
1703                 reg = TRANS_CHICKEN2(pipe);
1704                 val = I915_READ(reg);
1705                 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1706                 I915_WRITE(reg, val);
1707         }
1708
1709         reg = TRANSCONF(pipe);
1710         val = I915_READ(reg);
1711         pipeconf_val = I915_READ(PIPECONF(pipe));
1712
1713         if (HAS_PCH_IBX(dev_priv->dev)) {
1714                 /*
1715                  * make the BPC in transcoder be consistent with
1716                  * that in pipeconf reg.
1717                  */
1718                 val &= ~PIPECONF_BPC_MASK;
1719                 val |= pipeconf_val & PIPECONF_BPC_MASK;
1720         }
1721
1722         val &= ~TRANS_INTERLACE_MASK;
1723         if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1724                 if (HAS_PCH_IBX(dev_priv->dev) &&
1725                     intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
1726                         val |= TRANS_LEGACY_INTERLACED_ILK;
1727                 else
1728                         val |= TRANS_INTERLACED;
1729         else
1730                 val |= TRANS_PROGRESSIVE;
1731
1732         I915_WRITE(reg, val | TRANS_ENABLE);
1733         if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1734                 DRM_ERROR("failed to enable transcoder %d\n", pipe);
1735 }
1736
1737 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1738                                       enum transcoder cpu_transcoder)
1739 {
1740         u32 val, pipeconf_val;
1741
1742         /* PCH only available on ILK+ */
1743         BUG_ON(dev_priv->info->gen < 5);
1744
1745         /* FDI must be feeding us bits for PCH ports */
1746         assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1747         assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
1748
1749         /* Workaround: set timing override bit. */
1750         val = I915_READ(_TRANSA_CHICKEN2);
1751         val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1752         I915_WRITE(_TRANSA_CHICKEN2, val);
1753
1754         val = TRANS_ENABLE;
1755         pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1756
1757         if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1758             PIPECONF_INTERLACED_ILK)
1759                 val |= TRANS_INTERLACED;
1760         else
1761                 val |= TRANS_PROGRESSIVE;
1762
1763         I915_WRITE(TRANSCONF(TRANSCODER_A), val);
1764         if (wait_for(I915_READ(_TRANSACONF) & TRANS_STATE_ENABLE, 100))
1765                 DRM_ERROR("Failed to enable PCH transcoder\n");
1766 }
1767
1768 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1769                                             enum pipe pipe)
1770 {
1771         struct drm_device *dev = dev_priv->dev;
1772         uint32_t reg, val;
1773
1774         /* FDI relies on the transcoder */
1775         assert_fdi_tx_disabled(dev_priv, pipe);
1776         assert_fdi_rx_disabled(dev_priv, pipe);
1777
1778         /* Ports must be off as well */
1779         assert_pch_ports_disabled(dev_priv, pipe);
1780
1781         reg = TRANSCONF(pipe);
1782         val = I915_READ(reg);
1783         val &= ~TRANS_ENABLE;
1784         I915_WRITE(reg, val);
1785         /* wait for PCH transcoder off, transcoder state */
1786         if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1787                 DRM_ERROR("failed to disable transcoder %d\n", pipe);
1788
1789         if (!HAS_PCH_IBX(dev)) {
1790                 /* Workaround: Clear the timing override chicken bit again. */
1791                 reg = TRANS_CHICKEN2(pipe);
1792                 val = I915_READ(reg);
1793                 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1794                 I915_WRITE(reg, val);
1795         }
1796 }
1797
1798 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1799 {
1800         u32 val;
1801
1802         val = I915_READ(_TRANSACONF);
1803         val &= ~TRANS_ENABLE;
1804         I915_WRITE(_TRANSACONF, val);
1805         /* wait for PCH transcoder off, transcoder state */
1806         if (wait_for((I915_READ(_TRANSACONF) & TRANS_STATE_ENABLE) == 0, 50))
1807                 DRM_ERROR("Failed to disable PCH transcoder\n");
1808
1809         /* Workaround: clear timing override bit. */
1810         val = I915_READ(_TRANSA_CHICKEN2);
1811         val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1812         I915_WRITE(_TRANSA_CHICKEN2, val);
1813 }
1814
1815 /**
1816  * intel_enable_pipe - enable a pipe, asserting requirements
1817  * @dev_priv: i915 private structure
1818  * @pipe: pipe to enable
1819  * @pch_port: on ILK+, is this pipe driving a PCH port or not
1820  *
1821  * Enable @pipe, making sure that various hardware specific requirements
1822  * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1823  *
1824  * @pipe should be %PIPE_A or %PIPE_B.
1825  *
1826  * Will wait until the pipe is actually running (i.e. first vblank) before
1827  * returning.
1828  */
1829 static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
1830                               bool pch_port)
1831 {
1832         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1833                                                                       pipe);
1834         enum pipe pch_transcoder;
1835         int reg;
1836         u32 val;
1837
1838         if (HAS_PCH_LPT(dev_priv->dev))
1839                 pch_transcoder = TRANSCODER_A;
1840         else
1841                 pch_transcoder = pipe;
1842
1843         /*
1844          * A pipe without a PLL won't actually be able to drive bits from
1845          * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
1846          * need the check.
1847          */
1848         if (!HAS_PCH_SPLIT(dev_priv->dev))
1849                 assert_pll_enabled(dev_priv, pipe);
1850         else {
1851                 if (pch_port) {
1852                         /* if driving the PCH, we need FDI enabled */
1853                         assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
1854                         assert_fdi_tx_pll_enabled(dev_priv,
1855                                                   (enum pipe) cpu_transcoder);
1856                 }
1857                 /* FIXME: assert CPU port conditions for SNB+ */
1858         }
1859
1860         reg = PIPECONF(cpu_transcoder);
1861         val = I915_READ(reg);
1862         if (val & PIPECONF_ENABLE)
1863                 return;
1864
1865         I915_WRITE(reg, val | PIPECONF_ENABLE);
1866         intel_wait_for_vblank(dev_priv->dev, pipe);
1867 }
1868
1869 /**
1870  * intel_disable_pipe - disable a pipe, asserting requirements
1871  * @dev_priv: i915 private structure
1872  * @pipe: pipe to disable
1873  *
1874  * Disable @pipe, making sure that various hardware specific requirements
1875  * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
1876  *
1877  * @pipe should be %PIPE_A or %PIPE_B.
1878  *
1879  * Will wait until the pipe has shut down before returning.
1880  */
1881 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
1882                                enum pipe pipe)
1883 {
1884         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1885                                                                       pipe);
1886         int reg;
1887         u32 val;
1888
1889         /*
1890          * Make sure planes won't keep trying to pump pixels to us,
1891          * or we might hang the display.
1892          */
1893         assert_planes_disabled(dev_priv, pipe);
1894         assert_sprites_disabled(dev_priv, pipe);
1895
1896         /* Don't disable pipe A or pipe A PLLs if needed */
1897         if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1898                 return;
1899
1900         reg = PIPECONF(cpu_transcoder);
1901         val = I915_READ(reg);
1902         if ((val & PIPECONF_ENABLE) == 0)
1903                 return;
1904
1905         I915_WRITE(reg, val & ~PIPECONF_ENABLE);
1906         intel_wait_for_pipe_off(dev_priv->dev, pipe);
1907 }
1908
1909 /*
1910  * Plane regs are double buffered, going from enabled->disabled needs a
1911  * trigger in order to latch.  The display address reg provides this.
1912  */
1913 void intel_flush_display_plane(struct drm_i915_private *dev_priv,
1914                                       enum plane plane)
1915 {
1916         if (dev_priv->info->gen >= 4)
1917                 I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
1918         else
1919                 I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
1920 }
1921
1922 /**
1923  * intel_enable_plane - enable a display plane on a given pipe
1924  * @dev_priv: i915 private structure
1925  * @plane: plane to enable
1926  * @pipe: pipe being fed
1927  *
1928  * Enable @plane on @pipe, making sure that @pipe is running first.
1929  */
1930 static void intel_enable_plane(struct drm_i915_private *dev_priv,
1931                                enum plane plane, enum pipe pipe)
1932 {
1933         int reg;
1934         u32 val;
1935
1936         /* If the pipe isn't enabled, we can't pump pixels and may hang */
1937         assert_pipe_enabled(dev_priv, pipe);
1938
1939         reg = DSPCNTR(plane);
1940         val = I915_READ(reg);
1941         if (val & DISPLAY_PLANE_ENABLE)
1942                 return;
1943
1944         I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
1945         intel_flush_display_plane(dev_priv, plane);
1946         intel_wait_for_vblank(dev_priv->dev, pipe);
1947 }
1948
1949 /**
1950  * intel_disable_plane - disable a display plane
1951  * @dev_priv: i915 private structure
1952  * @plane: plane to disable
1953  * @pipe: pipe consuming the data
1954  *
1955  * Disable @plane; should be an independent operation.
1956  */
1957 static void intel_disable_plane(struct drm_i915_private *dev_priv,
1958                                 enum plane plane, enum pipe pipe)
1959 {
1960         int reg;
1961         u32 val;
1962
1963         reg = DSPCNTR(plane);
1964         val = I915_READ(reg);
1965         if ((val & DISPLAY_PLANE_ENABLE) == 0)
1966                 return;
1967
1968         I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
1969         intel_flush_display_plane(dev_priv, plane);
1970         intel_wait_for_vblank(dev_priv->dev, pipe);
1971 }
1972
1973 static bool need_vtd_wa(struct drm_device *dev)
1974 {
1975 #ifdef CONFIG_INTEL_IOMMU
1976         if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
1977                 return true;
1978 #endif
1979         return false;
1980 }
1981
1982 int
1983 intel_pin_and_fence_fb_obj(struct drm_device *dev,
1984                            struct drm_i915_gem_object *obj,
1985                            struct intel_ring_buffer *pipelined)
1986 {
1987         struct drm_i915_private *dev_priv = dev->dev_private;
1988         u32 alignment;
1989         int ret;
1990
1991         switch (obj->tiling_mode) {
1992         case I915_TILING_NONE:
1993                 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1994                         alignment = 128 * 1024;
1995                 else if (INTEL_INFO(dev)->gen >= 4)
1996                         alignment = 4 * 1024;
1997                 else
1998                         alignment = 64 * 1024;
1999                 break;
2000         case I915_TILING_X:
2001                 /* pin() will align the object as required by fence */
2002                 alignment = 0;
2003                 break;
2004         case I915_TILING_Y:
2005                 /* Despite that we check this in framebuffer_init userspace can
2006                  * screw us over and change the tiling after the fact. Only
2007                  * pinned buffers can't change their tiling. */
2008                 DRM_DEBUG_DRIVER("Y tiled not allowed for scan out buffers\n");
2009                 return -EINVAL;
2010         default:
2011                 BUG();
2012         }
2013
2014         /* Note that the w/a also requires 64 PTE of padding following the
2015          * bo. We currently fill all unused PTE with the shadow page and so
2016          * we should always have valid PTE following the scanout preventing
2017          * the VT-d warning.
2018          */
2019         if (need_vtd_wa(dev) && alignment < 256 * 1024)
2020                 alignment = 256 * 1024;
2021
2022         dev_priv->mm.interruptible = false;
2023         ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
2024         if (ret)
2025                 goto err_interruptible;
2026
2027         /* Install a fence for tiled scan-out. Pre-i965 always needs a
2028          * fence, whereas 965+ only requires a fence if using
2029          * framebuffer compression.  For simplicity, we always install
2030          * a fence as the cost is not that onerous.
2031          */
2032         ret = i915_gem_object_get_fence(obj);
2033         if (ret)
2034                 goto err_unpin;
2035
2036         i915_gem_object_pin_fence(obj);
2037
2038         dev_priv->mm.interruptible = true;
2039         return 0;
2040
2041 err_unpin:
2042         i915_gem_object_unpin(obj);
2043 err_interruptible:
2044         dev_priv->mm.interruptible = true;
2045         return ret;
2046 }
2047
2048 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
2049 {
2050         i915_gem_object_unpin_fence(obj);
2051         i915_gem_object_unpin(obj);
2052 }
2053
2054 /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
2055  * is assumed to be a power-of-two. */
2056 unsigned long intel_gen4_compute_page_offset(int *x, int *y,
2057                                              unsigned int tiling_mode,
2058                                              unsigned int cpp,
2059                                              unsigned int pitch)
2060 {
2061         if (tiling_mode != I915_TILING_NONE) {
2062                 unsigned int tile_rows, tiles;
2063
2064                 tile_rows = *y / 8;
2065                 *y %= 8;
2066
2067                 tiles = *x / (512/cpp);
2068                 *x %= 512/cpp;
2069
2070                 return tile_rows * pitch * 8 + tiles * 4096;
2071         } else {
2072                 unsigned int offset;
2073
2074                 offset = *y * pitch + *x * cpp;
2075                 *y = 0;
2076                 *x = (offset & 4095) / cpp;
2077                 return offset & -4096;
2078         }
2079 }
2080
2081 static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2082                              int x, int y)
2083 {
2084         struct drm_device *dev = crtc->dev;
2085         struct drm_i915_private *dev_priv = dev->dev_private;
2086         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2087         struct intel_framebuffer *intel_fb;
2088         struct drm_i915_gem_object *obj;
2089         int plane = intel_crtc->plane;
2090         unsigned long linear_offset;
2091         u32 dspcntr;
2092         u32 reg;
2093
2094         switch (plane) {
2095         case 0:
2096         case 1:
2097                 break;
2098         default:
2099                 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
2100                 return -EINVAL;
2101         }
2102
2103         intel_fb = to_intel_framebuffer(fb);
2104         obj = intel_fb->obj;
2105
2106         reg = DSPCNTR(plane);
2107         dspcntr = I915_READ(reg);
2108         /* Mask out pixel format bits in case we change it */
2109         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2110         switch (fb->pixel_format) {
2111         case DRM_FORMAT_C8:
2112                 dspcntr |= DISPPLANE_8BPP;
2113                 break;
2114         case DRM_FORMAT_XRGB1555:
2115         case DRM_FORMAT_ARGB1555:
2116                 dspcntr |= DISPPLANE_BGRX555;
2117                 break;
2118         case DRM_FORMAT_RGB565:
2119                 dspcntr |= DISPPLANE_BGRX565;
2120                 break;
2121         case DRM_FORMAT_XRGB8888:
2122         case DRM_FORMAT_ARGB8888:
2123                 dspcntr |= DISPPLANE_BGRX888;
2124                 break;
2125         case DRM_FORMAT_XBGR8888:
2126         case DRM_FORMAT_ABGR8888:
2127                 dspcntr |= DISPPLANE_RGBX888;
2128                 break;
2129         case DRM_FORMAT_XRGB2101010:
2130         case DRM_FORMAT_ARGB2101010:
2131                 dspcntr |= DISPPLANE_BGRX101010;
2132                 break;
2133         case DRM_FORMAT_XBGR2101010:
2134         case DRM_FORMAT_ABGR2101010:
2135                 dspcntr |= DISPPLANE_RGBX101010;
2136                 break;
2137         default:
2138                 BUG();
2139         }
2140
2141         if (INTEL_INFO(dev)->gen >= 4) {
2142                 if (obj->tiling_mode != I915_TILING_NONE)
2143                         dspcntr |= DISPPLANE_TILED;
2144                 else
2145                         dspcntr &= ~DISPPLANE_TILED;
2146         }
2147
2148         I915_WRITE(reg, dspcntr);
2149
2150         linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2151
2152         if (INTEL_INFO(dev)->gen >= 4) {
2153                 intel_crtc->dspaddr_offset =
2154                         intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2155                                                        fb->bits_per_pixel / 8,
2156                                                        fb->pitches[0]);
2157                 linear_offset -= intel_crtc->dspaddr_offset;
2158         } else {
2159                 intel_crtc->dspaddr_offset = linear_offset;
2160         }
2161
2162         DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
2163                       obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
2164         I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2165         if (INTEL_INFO(dev)->gen >= 4) {
2166                 I915_MODIFY_DISPBASE(DSPSURF(plane),
2167                                      obj->gtt_offset + intel_crtc->dspaddr_offset);
2168                 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2169                 I915_WRITE(DSPLINOFF(plane), linear_offset);
2170         } else
2171                 I915_WRITE(DSPADDR(plane), obj->gtt_offset + linear_offset);
2172         POSTING_READ(reg);
2173
2174         return 0;
2175 }
2176
2177 static int ironlake_update_plane(struct drm_crtc *crtc,
2178                                  struct drm_framebuffer *fb, int x, int y)
2179 {
2180         struct drm_device *dev = crtc->dev;
2181         struct drm_i915_private *dev_priv = dev->dev_private;
2182         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2183         struct intel_framebuffer *intel_fb;
2184         struct drm_i915_gem_object *obj;
2185         int plane = intel_crtc->plane;
2186         unsigned long linear_offset;
2187         u32 dspcntr;
2188         u32 reg;
2189
2190         switch (plane) {
2191         case 0:
2192         case 1:
2193         case 2:
2194                 break;
2195         default:
2196                 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
2197                 return -EINVAL;
2198         }
2199
2200         intel_fb = to_intel_framebuffer(fb);
2201         obj = intel_fb->obj;
2202
2203         reg = DSPCNTR(plane);
2204         dspcntr = I915_READ(reg);
2205         /* Mask out pixel format bits in case we change it */
2206         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2207         switch (fb->pixel_format) {
2208         case DRM_FORMAT_C8:
2209                 dspcntr |= DISPPLANE_8BPP;
2210                 break;
2211         case DRM_FORMAT_RGB565:
2212                 dspcntr |= DISPPLANE_BGRX565;
2213                 break;
2214         case DRM_FORMAT_XRGB8888:
2215         case DRM_FORMAT_ARGB8888:
2216                 dspcntr |= DISPPLANE_BGRX888;
2217                 break;
2218         case DRM_FORMAT_XBGR8888:
2219         case DRM_FORMAT_ABGR8888:
2220                 dspcntr |= DISPPLANE_RGBX888;
2221                 break;
2222         case DRM_FORMAT_XRGB2101010:
2223         case DRM_FORMAT_ARGB2101010:
2224                 dspcntr |= DISPPLANE_BGRX101010;
2225                 break;
2226         case DRM_FORMAT_XBGR2101010:
2227         case DRM_FORMAT_ABGR2101010:
2228                 dspcntr |= DISPPLANE_RGBX101010;
2229                 break;
2230         default:
2231                 BUG();
2232         }
2233
2234         if (obj->tiling_mode != I915_TILING_NONE)
2235                 dspcntr |= DISPPLANE_TILED;
2236         else
2237                 dspcntr &= ~DISPPLANE_TILED;
2238
2239         /* must disable */
2240         dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2241
2242         I915_WRITE(reg, dspcntr);
2243
2244         linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2245         intel_crtc->dspaddr_offset =
2246                 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2247                                                fb->bits_per_pixel / 8,
2248                                                fb->pitches[0]);
2249         linear_offset -= intel_crtc->dspaddr_offset;
2250
2251         DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
2252                       obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
2253         I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2254         I915_MODIFY_DISPBASE(DSPSURF(plane),
2255                              obj->gtt_offset + intel_crtc->dspaddr_offset);
2256         if (IS_HASWELL(dev)) {
2257                 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2258         } else {
2259                 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2260                 I915_WRITE(DSPLINOFF(plane), linear_offset);
2261         }
2262         POSTING_READ(reg);
2263
2264         return 0;
2265 }
2266
2267 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2268 static int
2269 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2270                            int x, int y, enum mode_set_atomic state)
2271 {
2272         struct drm_device *dev = crtc->dev;
2273         struct drm_i915_private *dev_priv = dev->dev_private;
2274
2275         if (dev_priv->display.disable_fbc)
2276                 dev_priv->display.disable_fbc(dev);
2277         intel_increase_pllclock(crtc);
2278
2279         return dev_priv->display.update_plane(crtc, fb, x, y);
2280 }
2281
2282 void intel_display_handle_reset(struct drm_device *dev)
2283 {
2284         struct drm_i915_private *dev_priv = dev->dev_private;
2285         struct drm_crtc *crtc;
2286
2287         /*
2288          * Flips in the rings have been nuked by the reset,
2289          * so complete all pending flips so that user space
2290          * will get its events and not get stuck.
2291          *
2292          * Also update the base address of all primary
2293          * planes to the the last fb to make sure we're
2294          * showing the correct fb after a reset.
2295          *
2296          * Need to make two loops over the crtcs so that we
2297          * don't try to grab a crtc mutex before the
2298          * pending_flip_queue really got woken up.
2299          */
2300
2301         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2302                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2303                 enum plane plane = intel_crtc->plane;
2304
2305                 intel_prepare_page_flip(dev, plane);
2306                 intel_finish_page_flip_plane(dev, plane);
2307         }
2308
2309         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2310                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2311
2312                 mutex_lock(&crtc->mutex);
2313                 if (intel_crtc->active)
2314                         dev_priv->display.update_plane(crtc, crtc->fb,
2315                                                        crtc->x, crtc->y);
2316                 mutex_unlock(&crtc->mutex);
2317         }
2318 }
2319
2320 static int
2321 intel_finish_fb(struct drm_framebuffer *old_fb)
2322 {
2323         struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
2324         struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
2325         bool was_interruptible = dev_priv->mm.interruptible;
2326         int ret;
2327
2328         /* Big Hammer, we also need to ensure that any pending
2329          * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2330          * current scanout is retired before unpinning the old
2331          * framebuffer.
2332          *
2333          * This should only fail upon a hung GPU, in which case we
2334          * can safely continue.
2335          */
2336         dev_priv->mm.interruptible = false;
2337         ret = i915_gem_object_finish_gpu(obj);
2338         dev_priv->mm.interruptible = was_interruptible;
2339
2340         return ret;
2341 }
2342
2343 static void intel_crtc_update_sarea_pos(struct drm_crtc *crtc, int x, int y)
2344 {
2345         struct drm_device *dev = crtc->dev;
2346         struct drm_i915_master_private *master_priv;
2347         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2348
2349         if (!dev->primary->master)
2350                 return;
2351
2352         master_priv = dev->primary->master->driver_priv;
2353         if (!master_priv->sarea_priv)
2354                 return;
2355
2356         switch (intel_crtc->pipe) {
2357         case 0:
2358                 master_priv->sarea_priv->pipeA_x = x;
2359                 master_priv->sarea_priv->pipeA_y = y;
2360                 break;
2361         case 1:
2362                 master_priv->sarea_priv->pipeB_x = x;
2363                 master_priv->sarea_priv->pipeB_y = y;
2364                 break;
2365         default:
2366                 break;
2367         }
2368 }
2369
2370 static int
2371 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2372                     struct drm_framebuffer *fb)
2373 {
2374         struct drm_device *dev = crtc->dev;
2375         struct drm_i915_private *dev_priv = dev->dev_private;
2376         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2377         struct drm_framebuffer *old_fb;
2378         int ret;
2379
2380         /* no fb bound */
2381         if (!fb) {
2382                 DRM_ERROR("No FB bound\n");
2383                 return 0;
2384         }
2385
2386         if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
2387                 DRM_ERROR("no plane for crtc: plane %d, num_pipes %d\n",
2388                                 intel_crtc->plane,
2389                                 INTEL_INFO(dev)->num_pipes);
2390                 return -EINVAL;
2391         }
2392
2393         mutex_lock(&dev->struct_mutex);
2394         ret = intel_pin_and_fence_fb_obj(dev,
2395                                          to_intel_framebuffer(fb)->obj,
2396                                          NULL);
2397         if (ret != 0) {
2398                 mutex_unlock(&dev->struct_mutex);
2399                 DRM_ERROR("pin & fence failed\n");
2400                 return ret;
2401         }
2402
2403         ret = dev_priv->display.update_plane(crtc, fb, x, y);
2404         if (ret) {
2405                 intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
2406                 mutex_unlock(&dev->struct_mutex);
2407                 DRM_ERROR("failed to update base address\n");
2408                 return ret;
2409         }
2410
2411         old_fb = crtc->fb;
2412         crtc->fb = fb;
2413         crtc->x = x;
2414         crtc->y = y;
2415
2416         if (old_fb) {
2417                 intel_wait_for_vblank(dev, intel_crtc->pipe);
2418                 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
2419         }
2420
2421         intel_update_fbc(dev);
2422         mutex_unlock(&dev->struct_mutex);
2423
2424         intel_crtc_update_sarea_pos(crtc, x, y);
2425
2426         return 0;
2427 }
2428
2429 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2430 {
2431         struct drm_device *dev = crtc->dev;
2432         struct drm_i915_private *dev_priv = dev->dev_private;
2433         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2434         int pipe = intel_crtc->pipe;
2435         u32 reg, temp;
2436
2437         /* enable normal train */
2438         reg = FDI_TX_CTL(pipe);
2439         temp = I915_READ(reg);
2440         if (IS_IVYBRIDGE(dev)) {
2441                 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2442                 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2443         } else {
2444                 temp &= ~FDI_LINK_TRAIN_NONE;
2445                 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2446         }
2447         I915_WRITE(reg, temp);
2448
2449         reg = FDI_RX_CTL(pipe);
2450         temp = I915_READ(reg);
2451         if (HAS_PCH_CPT(dev)) {
2452                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2453                 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2454         } else {
2455                 temp &= ~FDI_LINK_TRAIN_NONE;
2456                 temp |= FDI_LINK_TRAIN_NONE;
2457         }
2458         I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2459
2460         /* wait one idle pattern time */
2461         POSTING_READ(reg);
2462         udelay(1000);
2463
2464         /* IVB wants error correction enabled */
2465         if (IS_IVYBRIDGE(dev))
2466                 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2467                            FDI_FE_ERRC_ENABLE);
2468 }
2469
2470 static void ivb_modeset_global_resources(struct drm_device *dev)
2471 {
2472         struct drm_i915_private *dev_priv = dev->dev_private;
2473         struct intel_crtc *pipe_B_crtc =
2474                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
2475         struct intel_crtc *pipe_C_crtc =
2476                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
2477         uint32_t temp;
2478
2479         /* When everything is off disable fdi C so that we could enable fdi B
2480          * with all lanes. XXX: This misses the case where a pipe is not using
2481          * any pch resources and so doesn't need any fdi lanes. */
2482         if (!pipe_B_crtc->base.enabled && !pipe_C_crtc->base.enabled) {
2483                 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
2484                 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
2485
2486                 temp = I915_READ(SOUTH_CHICKEN1);
2487                 temp &= ~FDI_BC_BIFURCATION_SELECT;
2488                 DRM_DEBUG_KMS("disabling fdi C rx\n");
2489                 I915_WRITE(SOUTH_CHICKEN1, temp);
2490         }
2491 }
2492
2493 /* The FDI link training functions for ILK/Ibexpeak. */
2494 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
2495 {
2496         struct drm_device *dev = crtc->dev;
2497         struct drm_i915_private *dev_priv = dev->dev_private;
2498         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2499         int pipe = intel_crtc->pipe;
2500         int plane = intel_crtc->plane;
2501         u32 reg, temp, tries;
2502
2503         /* FDI needs bits from pipe & plane first */
2504         assert_pipe_enabled(dev_priv, pipe);
2505         assert_plane_enabled(dev_priv, plane);
2506
2507         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2508            for train result */
2509         reg = FDI_RX_IMR(pipe);
2510         temp = I915_READ(reg);
2511         temp &= ~FDI_RX_SYMBOL_LOCK;
2512         temp &= ~FDI_RX_BIT_LOCK;
2513         I915_WRITE(reg, temp);
2514         I915_READ(reg);
2515         udelay(150);
2516
2517         /* enable CPU FDI TX and PCH FDI RX */
2518         reg = FDI_TX_CTL(pipe);
2519         temp = I915_READ(reg);
2520         temp &= ~(7 << 19);
2521         temp |= (intel_crtc->fdi_lanes - 1) << 19;
2522         temp &= ~FDI_LINK_TRAIN_NONE;
2523         temp |= FDI_LINK_TRAIN_PATTERN_1;
2524         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2525
2526         reg = FDI_RX_CTL(pipe);
2527         temp = I915_READ(reg);
2528         temp &= ~FDI_LINK_TRAIN_NONE;
2529         temp |= FDI_LINK_TRAIN_PATTERN_1;
2530         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2531
2532         POSTING_READ(reg);
2533         udelay(150);
2534
2535         /* Ironlake workaround, enable clock pointer after FDI enable*/
2536         I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2537         I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
2538                    FDI_RX_PHASE_SYNC_POINTER_EN);
2539
2540         reg = FDI_RX_IIR(pipe);
2541         for (tries = 0; tries < 5; tries++) {
2542                 temp = I915_READ(reg);
2543                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2544
2545                 if ((temp & FDI_RX_BIT_LOCK)) {
2546                         DRM_DEBUG_KMS("FDI train 1 done.\n");
2547                         I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2548                         break;
2549                 }
2550         }
2551         if (tries == 5)
2552                 DRM_ERROR("FDI train 1 fail!\n");
2553
2554         /* Train 2 */
2555         reg = FDI_TX_CTL(pipe);
2556         temp = I915_READ(reg);
2557         temp &= ~FDI_LINK_TRAIN_NONE;
2558         temp |= FDI_LINK_TRAIN_PATTERN_2;
2559         I915_WRITE(reg, temp);
2560
2561         reg = FDI_RX_CTL(pipe);
2562         temp = I915_READ(reg);
2563         temp &= ~FDI_LINK_TRAIN_NONE;
2564         temp |= FDI_LINK_TRAIN_PATTERN_2;
2565         I915_WRITE(reg, temp);
2566
2567         POSTING_READ(reg);
2568         udelay(150);
2569
2570         reg = FDI_RX_IIR(pipe);
2571         for (tries = 0; tries < 5; tries++) {
2572                 temp = I915_READ(reg);
2573                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2574
2575                 if (temp & FDI_RX_SYMBOL_LOCK) {
2576                         I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2577                         DRM_DEBUG_KMS("FDI train 2 done.\n");
2578                         break;
2579                 }
2580         }
2581         if (tries == 5)
2582                 DRM_ERROR("FDI train 2 fail!\n");
2583
2584         DRM_DEBUG_KMS("FDI train done\n");
2585
2586 }
2587
2588 static const int snb_b_fdi_train_param[] = {
2589         FDI_LINK_TRAIN_400MV_0DB_SNB_B,
2590         FDI_LINK_TRAIN_400MV_6DB_SNB_B,
2591         FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
2592         FDI_LINK_TRAIN_800MV_0DB_SNB_B,
2593 };
2594
2595 /* The FDI link training functions for SNB/Cougarpoint. */
2596 static void gen6_fdi_link_train(struct drm_crtc *crtc)
2597 {
2598         struct drm_device *dev = crtc->dev;
2599         struct drm_i915_private *dev_priv = dev->dev_private;
2600         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2601         int pipe = intel_crtc->pipe;
2602         u32 reg, temp, i, retry;
2603
2604         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2605            for train result */
2606         reg = FDI_RX_IMR(pipe);
2607         temp = I915_READ(reg);
2608         temp &= ~FDI_RX_SYMBOL_LOCK;
2609         temp &= ~FDI_RX_BIT_LOCK;
2610         I915_WRITE(reg, temp);
2611
2612         POSTING_READ(reg);
2613         udelay(150);
2614
2615         /* enable CPU FDI TX and PCH FDI RX */
2616         reg = FDI_TX_CTL(pipe);
2617         temp = I915_READ(reg);
2618         temp &= ~(7 << 19);
2619         temp |= (intel_crtc->fdi_lanes - 1) << 19;
2620         temp &= ~FDI_LINK_TRAIN_NONE;
2621         temp |= FDI_LINK_TRAIN_PATTERN_1;
2622         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2623         /* SNB-B */
2624         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2625         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2626
2627         I915_WRITE(FDI_RX_MISC(pipe),
2628                    FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2629
2630         reg = FDI_RX_CTL(pipe);
2631         temp = I915_READ(reg);
2632         if (HAS_PCH_CPT(dev)) {
2633                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2634                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2635         } else {
2636                 temp &= ~FDI_LINK_TRAIN_NONE;
2637                 temp |= FDI_LINK_TRAIN_PATTERN_1;
2638         }
2639         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2640
2641         POSTING_READ(reg);
2642         udelay(150);
2643
2644         for (i = 0; i < 4; i++) {
2645                 reg = FDI_TX_CTL(pipe);
2646                 temp = I915_READ(reg);
2647                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2648                 temp |= snb_b_fdi_train_param[i];
2649                 I915_WRITE(reg, temp);
2650
2651                 POSTING_READ(reg);
2652                 udelay(500);
2653
2654                 for (retry = 0; retry < 5; retry++) {
2655                         reg = FDI_RX_IIR(pipe);
2656                         temp = I915_READ(reg);
2657                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2658                         if (temp & FDI_RX_BIT_LOCK) {
2659                                 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2660                                 DRM_DEBUG_KMS("FDI train 1 done.\n");
2661                                 break;
2662                         }
2663                         udelay(50);
2664                 }
2665                 if (retry < 5)
2666                         break;
2667         }
2668         if (i == 4)
2669                 DRM_ERROR("FDI train 1 fail!\n");
2670
2671         /* Train 2 */
2672         reg = FDI_TX_CTL(pipe);
2673         temp = I915_READ(reg);
2674         temp &= ~FDI_LINK_TRAIN_NONE;
2675         temp |= FDI_LINK_TRAIN_PATTERN_2;
2676         if (IS_GEN6(dev)) {
2677                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2678                 /* SNB-B */
2679                 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2680         }
2681         I915_WRITE(reg, temp);
2682
2683         reg = FDI_RX_CTL(pipe);
2684         temp = I915_READ(reg);
2685         if (HAS_PCH_CPT(dev)) {
2686                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2687                 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2688         } else {
2689                 temp &= ~FDI_LINK_TRAIN_NONE;
2690                 temp |= FDI_LINK_TRAIN_PATTERN_2;
2691         }
2692         I915_WRITE(reg, temp);
2693
2694         POSTING_READ(reg);
2695         udelay(150);
2696
2697         for (i = 0; i < 4; i++) {
2698                 reg = FDI_TX_CTL(pipe);
2699                 temp = I915_READ(reg);
2700                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2701                 temp |= snb_b_fdi_train_param[i];
2702                 I915_WRITE(reg, temp);
2703
2704                 POSTING_READ(reg);
2705                 udelay(500);
2706
2707                 for (retry = 0; retry < 5; retry++) {
2708                         reg = FDI_RX_IIR(pipe);
2709                         temp = I915_READ(reg);
2710                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2711                         if (temp & FDI_RX_SYMBOL_LOCK) {
2712                                 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2713                                 DRM_DEBUG_KMS("FDI train 2 done.\n");
2714                                 break;
2715                         }
2716                         udelay(50);
2717                 }
2718                 if (retry < 5)
2719                         break;
2720         }
2721         if (i == 4)
2722                 DRM_ERROR("FDI train 2 fail!\n");
2723
2724         DRM_DEBUG_KMS("FDI train done.\n");
2725 }
2726
2727 /* Manual link training for Ivy Bridge A0 parts */
2728 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
2729 {
2730         struct drm_device *dev = crtc->dev;
2731         struct drm_i915_private *dev_priv = dev->dev_private;
2732         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2733         int pipe = intel_crtc->pipe;
2734         u32 reg, temp, i;
2735
2736         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2737            for train result */
2738         reg = FDI_RX_IMR(pipe);
2739         temp = I915_READ(reg);
2740         temp &= ~FDI_RX_SYMBOL_LOCK;
2741         temp &= ~FDI_RX_BIT_LOCK;
2742         I915_WRITE(reg, temp);
2743
2744         POSTING_READ(reg);
2745         udelay(150);
2746
2747         DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
2748                       I915_READ(FDI_RX_IIR(pipe)));
2749
2750         /* enable CPU FDI TX and PCH FDI RX */
2751         reg = FDI_TX_CTL(pipe);
2752         temp = I915_READ(reg);
2753         temp &= ~(7 << 19);
2754         temp |= (intel_crtc->fdi_lanes - 1) << 19;
2755         temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
2756         temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
2757         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2758         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2759         temp |= FDI_COMPOSITE_SYNC;
2760         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2761
2762         I915_WRITE(FDI_RX_MISC(pipe),
2763                    FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2764
2765         reg = FDI_RX_CTL(pipe);
2766         temp = I915_READ(reg);
2767         temp &= ~FDI_LINK_TRAIN_AUTO;
2768         temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2769         temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2770         temp |= FDI_COMPOSITE_SYNC;
2771         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2772
2773         POSTING_READ(reg);
2774         udelay(150);
2775
2776         for (i = 0; i < 4; i++) {
2777                 reg = FDI_TX_CTL(pipe);
2778                 temp = I915_READ(reg);
2779                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2780                 temp |= snb_b_fdi_train_param[i];
2781                 I915_WRITE(reg, temp);
2782
2783                 POSTING_READ(reg);
2784                 udelay(500);
2785
2786                 reg = FDI_RX_IIR(pipe);
2787                 temp = I915_READ(reg);
2788                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2789
2790                 if (temp & FDI_RX_BIT_LOCK ||
2791                     (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
2792                         I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2793                         DRM_DEBUG_KMS("FDI train 1 done, level %i.\n", i);
2794                         break;
2795                 }
2796         }
2797         if (i == 4)
2798                 DRM_ERROR("FDI train 1 fail!\n");
2799
2800         /* Train 2 */
2801         reg = FDI_TX_CTL(pipe);
2802         temp = I915_READ(reg);
2803         temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2804         temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
2805         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2806         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2807         I915_WRITE(reg, temp);
2808
2809         reg = FDI_RX_CTL(pipe);
2810         temp = I915_READ(reg);
2811         temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2812         temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2813         I915_WRITE(reg, temp);
2814
2815         POSTING_READ(reg);
2816         udelay(150);
2817
2818         for (i = 0; i < 4; i++) {
2819                 reg = FDI_TX_CTL(pipe);
2820                 temp = I915_READ(reg);
2821                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2822                 temp |= snb_b_fdi_train_param[i];
2823                 I915_WRITE(reg, temp);
2824
2825                 POSTING_READ(reg);
2826                 udelay(500);
2827
2828                 reg = FDI_RX_IIR(pipe);
2829                 temp = I915_READ(reg);
2830                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2831
2832                 if (temp & FDI_RX_SYMBOL_LOCK) {
2833                         I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2834                         DRM_DEBUG_KMS("FDI train 2 done, level %i.\n", i);
2835                         break;
2836                 }
2837         }
2838         if (i == 4)
2839                 DRM_ERROR("FDI train 2 fail!\n");
2840
2841         DRM_DEBUG_KMS("FDI train done.\n");
2842 }
2843
2844 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
2845 {
2846         struct drm_device *dev = intel_crtc->base.dev;
2847         struct drm_i915_private *dev_priv = dev->dev_private;
2848         int pipe = intel_crtc->pipe;
2849         u32 reg, temp;
2850
2851
2852         /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
2853         reg = FDI_RX_CTL(pipe);
2854         temp = I915_READ(reg);
2855         temp &= ~((0x7 << 19) | (0x7 << 16));
2856         temp |= (intel_crtc->fdi_lanes - 1) << 19;
2857         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2858         I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
2859
2860         POSTING_READ(reg);
2861         udelay(200);
2862
2863         /* Switch from Rawclk to PCDclk */
2864         temp = I915_READ(reg);
2865         I915_WRITE(reg, temp | FDI_PCDCLK);
2866
2867         POSTING_READ(reg);
2868         udelay(200);
2869
2870         /* Enable CPU FDI TX PLL, always on for Ironlake */
2871         reg = FDI_TX_CTL(pipe);
2872         temp = I915_READ(reg);
2873         if ((temp & FDI_TX_PLL_ENABLE) == 0) {
2874                 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
2875
2876                 POSTING_READ(reg);
2877                 udelay(100);
2878         }
2879 }
2880
2881 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
2882 {
2883         struct drm_device *dev = intel_crtc->base.dev;
2884         struct drm_i915_private *dev_priv = dev->dev_private;
2885         int pipe = intel_crtc->pipe;
2886         u32 reg, temp;
2887
2888         /* Switch from PCDclk to Rawclk */
2889         reg = FDI_RX_CTL(pipe);
2890         temp = I915_READ(reg);
2891         I915_WRITE(reg, temp & ~FDI_PCDCLK);
2892
2893         /* Disable CPU FDI TX PLL */
2894         reg = FDI_TX_CTL(pipe);
2895         temp = I915_READ(reg);
2896         I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
2897
2898         POSTING_READ(reg);
2899         udelay(100);
2900
2901         reg = FDI_RX_CTL(pipe);
2902         temp = I915_READ(reg);
2903         I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
2904
2905         /* Wait for the clocks to turn off. */
2906         POSTING_READ(reg);
2907         udelay(100);
2908 }
2909
2910 static void ironlake_fdi_disable(struct drm_crtc *crtc)
2911 {
2912         struct drm_device *dev = crtc->dev;
2913         struct drm_i915_private *dev_priv = dev->dev_private;
2914         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2915         int pipe = intel_crtc->pipe;
2916         u32 reg, temp;
2917
2918         /* disable CPU FDI tx and PCH FDI rx */
2919         reg = FDI_TX_CTL(pipe);
2920         temp = I915_READ(reg);
2921         I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
2922         POSTING_READ(reg);
2923
2924         reg = FDI_RX_CTL(pipe);
2925         temp = I915_READ(reg);
2926         temp &= ~(0x7 << 16);
2927         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2928         I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
2929
2930         POSTING_READ(reg);
2931         udelay(100);
2932
2933         /* Ironlake workaround, disable clock pointer after downing FDI */
2934         if (HAS_PCH_IBX(dev)) {
2935                 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2936         }
2937
2938         /* still set train pattern 1 */
2939         reg = FDI_TX_CTL(pipe);
2940         temp = I915_READ(reg);
2941         temp &= ~FDI_LINK_TRAIN_NONE;
2942         temp |= FDI_LINK_TRAIN_PATTERN_1;
2943         I915_WRITE(reg, temp);
2944
2945         reg = FDI_RX_CTL(pipe);
2946         temp = I915_READ(reg);
2947         if (HAS_PCH_CPT(dev)) {
2948                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2949                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2950         } else {
2951                 temp &= ~FDI_LINK_TRAIN_NONE;
2952                 temp |= FDI_LINK_TRAIN_PATTERN_1;
2953         }
2954         /* BPC in FDI rx is consistent with that in PIPECONF */
2955         temp &= ~(0x07 << 16);
2956         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2957         I915_WRITE(reg, temp);
2958
2959         POSTING_READ(reg);
2960         udelay(100);
2961 }
2962
2963 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
2964 {
2965         struct drm_device *dev = crtc->dev;
2966         struct drm_i915_private *dev_priv = dev->dev_private;
2967         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2968         unsigned long flags;
2969         bool pending;
2970
2971         if (i915_reset_in_progress(&dev_priv->gpu_error) ||
2972             intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
2973                 return false;
2974
2975         spin_lock_irqsave(&dev->event_lock, flags);
2976         pending = to_intel_crtc(crtc)->unpin_work != NULL;
2977         spin_unlock_irqrestore(&dev->event_lock, flags);
2978
2979         return pending;
2980 }
2981
2982 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
2983 {
2984         struct drm_device *dev = crtc->dev;
2985         struct drm_i915_private *dev_priv = dev->dev_private;
2986
2987         if (crtc->fb == NULL)
2988                 return;
2989
2990         WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
2991
2992         wait_event(dev_priv->pending_flip_queue,
2993                    !intel_crtc_has_pending_flip(crtc));
2994
2995         mutex_lock(&dev->struct_mutex);
2996         intel_finish_fb(crtc->fb);
2997         mutex_unlock(&dev->struct_mutex);
2998 }
2999
3000 /* Program iCLKIP clock to the desired frequency */
3001 static void lpt_program_iclkip(struct drm_crtc *crtc)
3002 {
3003         struct drm_device *dev = crtc->dev;
3004         struct drm_i915_private *dev_priv = dev->dev_private;
3005         u32 divsel, phaseinc, auxdiv, phasedir = 0;
3006         u32 temp;
3007
3008         mutex_lock(&dev_priv->dpio_lock);
3009
3010         /* It is necessary to ungate the pixclk gate prior to programming
3011          * the divisors, and gate it back when it is done.
3012          */
3013         I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
3014
3015         /* Disable SSCCTL */
3016         intel_sbi_write(dev_priv, SBI_SSCCTL6,
3017                         intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) |
3018                                 SBI_SSCCTL_DISABLE,
3019                         SBI_ICLK);
3020
3021         /* 20MHz is a corner case which is out of range for the 7-bit divisor */
3022         if (crtc->mode.clock == 20000) {
3023                 auxdiv = 1;
3024                 divsel = 0x41;
3025                 phaseinc = 0x20;
3026         } else {
3027                 /* The iCLK virtual clock root frequency is in MHz,
3028                  * but the crtc->mode.clock in in KHz. To get the divisors,
3029                  * it is necessary to divide one by another, so we
3030                  * convert the virtual clock precision to KHz here for higher
3031                  * precision.
3032                  */
3033                 u32 iclk_virtual_root_freq = 172800 * 1000;
3034                 u32 iclk_pi_range = 64;
3035                 u32 desired_divisor, msb_divisor_value, pi_value;
3036
3037                 desired_divisor = (iclk_virtual_root_freq / crtc->mode.clock);
3038                 msb_divisor_value = desired_divisor / iclk_pi_range;
3039                 pi_value = desired_divisor % iclk_pi_range;
3040
3041                 auxdiv = 0;
3042                 divsel = msb_divisor_value - 2;
3043                 phaseinc = pi_value;
3044         }
3045
3046         /* This should not happen with any sane values */
3047         WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
3048                 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
3049         WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
3050                 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
3051
3052         DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
3053                         crtc->mode.clock,
3054                         auxdiv,
3055                         divsel,
3056                         phasedir,
3057                         phaseinc);
3058
3059         /* Program SSCDIVINTPHASE6 */
3060         temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3061         temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
3062         temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
3063         temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
3064         temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
3065         temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
3066         temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
3067         intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
3068
3069         /* Program SSCAUXDIV */
3070         temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3071         temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
3072         temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
3073         intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
3074
3075         /* Enable modulator and associated divider */
3076         temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3077         temp &= ~SBI_SSCCTL_DISABLE;
3078         intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3079
3080         /* Wait for initialization time */
3081         udelay(24);
3082
3083         I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
3084
3085         mutex_unlock(&dev_priv->dpio_lock);
3086 }
3087
3088 /*
3089  * Enable PCH resources required for PCH ports:
3090  *   - PCH PLLs
3091  *   - FDI training & RX/TX
3092  *   - update transcoder timings
3093  *   - DP transcoding bits
3094  *   - transcoder
3095  */
3096 static void ironlake_pch_enable(struct drm_crtc *crtc)
3097 {
3098         struct drm_device *dev = crtc->dev;
3099         struct drm_i915_private *dev_priv = dev->dev_private;
3100         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3101         int pipe = intel_crtc->pipe;
3102         u32 reg, temp;
3103
3104         assert_transcoder_disabled(dev_priv, pipe);
3105
3106         /* Write the TU size bits before fdi link training, so that error
3107          * detection works. */
3108         I915_WRITE(FDI_RX_TUSIZE1(pipe),
3109                    I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
3110
3111         /* For PCH output, training FDI link */
3112         dev_priv->display.fdi_link_train(crtc);
3113
3114         /* XXX: pch pll's can be enabled any time before we enable the PCH
3115          * transcoder, and we actually should do this to not upset any PCH
3116          * transcoder that already use the clock when we share it.
3117          *
3118          * Note that enable_pch_pll tries to do the right thing, but get_pch_pll
3119          * unconditionally resets the pll - we need that to have the right LVDS
3120          * enable sequence. */
3121         ironlake_enable_pch_pll(intel_crtc);
3122
3123         if (HAS_PCH_CPT(dev)) {
3124                 u32 sel;
3125
3126                 temp = I915_READ(PCH_DPLL_SEL);
3127                 switch (pipe) {
3128                 default:
3129                 case 0:
3130                         temp |= TRANSA_DPLL_ENABLE;
3131                         sel = TRANSA_DPLLB_SEL;
3132                         break;
3133                 case 1:
3134                         temp |= TRANSB_DPLL_ENABLE;
3135                         sel = TRANSB_DPLLB_SEL;
3136                         break;
3137                 case 2:
3138                         temp |= TRANSC_DPLL_ENABLE;
3139                         sel = TRANSC_DPLLB_SEL;
3140                         break;
3141                 }
3142                 if (intel_crtc->pch_pll->pll_reg == _PCH_DPLL_B)
3143                         temp |= sel;
3144                 else
3145                         temp &= ~sel;
3146                 I915_WRITE(PCH_DPLL_SEL, temp);
3147         }
3148
3149         /* set transcoder timing, panel must allow it */
3150         assert_panel_unlocked(dev_priv, pipe);
3151         I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
3152         I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
3153         I915_WRITE(TRANS_HSYNC(pipe),  I915_READ(HSYNC(pipe)));
3154
3155         I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
3156         I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
3157         I915_WRITE(TRANS_VSYNC(pipe),  I915_READ(VSYNC(pipe)));
3158         I915_WRITE(TRANS_VSYNCSHIFT(pipe),  I915_READ(VSYNCSHIFT(pipe)));
3159
3160         intel_fdi_normal_train(crtc);
3161
3162         /* For PCH DP, enable TRANS_DP_CTL */
3163         if (HAS_PCH_CPT(dev) &&
3164             (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
3165              intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
3166                 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
3167                 reg = TRANS_DP_CTL(pipe);
3168                 temp = I915_READ(reg);
3169                 temp &= ~(TRANS_DP_PORT_SEL_MASK |
3170                           TRANS_DP_SYNC_MASK |
3171                           TRANS_DP_BPC_MASK);
3172                 temp |= (TRANS_DP_OUTPUT_ENABLE |
3173                          TRANS_DP_ENH_FRAMING);
3174                 temp |= bpc << 9; /* same format but at 11:9 */
3175
3176                 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
3177                         temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
3178                 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
3179                         temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
3180
3181                 switch (intel_trans_dp_port_sel(crtc)) {
3182                 case PCH_DP_B:
3183                         temp |= TRANS_DP_PORT_SEL_B;
3184                         break;
3185                 case PCH_DP_C:
3186                         temp |= TRANS_DP_PORT_SEL_C;
3187                         break;
3188                 case PCH_DP_D:
3189                         temp |= TRANS_DP_PORT_SEL_D;
3190                         break;
3191                 default:
3192                         BUG();
3193                 }
3194
3195                 I915_WRITE(reg, temp);
3196         }
3197
3198         ironlake_enable_pch_transcoder(dev_priv, pipe);
3199 }
3200
3201 static void lpt_pch_enable(struct drm_crtc *crtc)
3202 {
3203         struct drm_device *dev = crtc->dev;
3204         struct drm_i915_private *dev_priv = dev->dev_private;
3205         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3206         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3207
3208         assert_transcoder_disabled(dev_priv, TRANSCODER_A);
3209
3210         lpt_program_iclkip(crtc);
3211
3212         /* Set transcoder timing. */
3213         I915_WRITE(_TRANS_HTOTAL_A, I915_READ(HTOTAL(cpu_transcoder)));
3214         I915_WRITE(_TRANS_HBLANK_A, I915_READ(HBLANK(cpu_transcoder)));
3215         I915_WRITE(_TRANS_HSYNC_A,  I915_READ(HSYNC(cpu_transcoder)));
3216
3217         I915_WRITE(_TRANS_VTOTAL_A, I915_READ(VTOTAL(cpu_transcoder)));
3218         I915_WRITE(_TRANS_VBLANK_A, I915_READ(VBLANK(cpu_transcoder)));
3219         I915_WRITE(_TRANS_VSYNC_A,  I915_READ(VSYNC(cpu_transcoder)));
3220         I915_WRITE(_TRANS_VSYNCSHIFT_A, I915_READ(VSYNCSHIFT(cpu_transcoder)));
3221
3222         lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
3223 }
3224
3225 static void intel_put_pch_pll(struct intel_crtc *intel_crtc)
3226 {
3227         struct intel_pch_pll *pll = intel_crtc->pch_pll;
3228
3229         if (pll == NULL)
3230                 return;
3231
3232         if (pll->refcount == 0) {
3233                 WARN(1, "bad PCH PLL refcount\n");
3234                 return;
3235         }
3236
3237         --pll->refcount;
3238         intel_crtc->pch_pll = NULL;
3239 }
3240
3241 static struct intel_pch_pll *intel_get_pch_pll(struct intel_crtc *intel_crtc, u32 dpll, u32 fp)
3242 {
3243         struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
3244         struct intel_pch_pll *pll;
3245         int i;
3246
3247         pll = intel_crtc->pch_pll;
3248         if (pll) {
3249                 DRM_DEBUG_KMS("CRTC:%d reusing existing PCH PLL %x\n",
3250                               intel_crtc->base.base.id, pll->pll_reg);
3251                 goto prepare;
3252         }
3253
3254         if (HAS_PCH_IBX(dev_priv->dev)) {
3255                 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
3256                 i = intel_crtc->pipe;
3257                 pll = &dev_priv->pch_plls[i];
3258
3259                 DRM_DEBUG_KMS("CRTC:%d using pre-allocated PCH PLL %x\n",
3260                               intel_crtc->base.base.id, pll->pll_reg);
3261
3262                 goto found;
3263         }
3264
3265         for (i = 0; i < dev_priv->num_pch_pll; i++) {
3266                 pll = &dev_priv->pch_plls[i];
3267
3268                 /* Only want to check enabled timings first */
3269                 if (pll->refcount == 0)
3270                         continue;
3271
3272                 if (dpll == (I915_READ(pll->pll_reg) & 0x7fffffff) &&
3273                     fp == I915_READ(pll->fp0_reg)) {
3274                         DRM_DEBUG_KMS("CRTC:%d sharing existing PCH PLL %x (refcount %d, ative %d)\n",
3275                                       intel_crtc->base.base.id,
3276                                       pll->pll_reg, pll->refcount, pll->active);
3277
3278                         goto found;
3279                 }
3280         }
3281
3282         /* Ok no matching timings, maybe there's a free one? */
3283         for (i = 0; i < dev_priv->num_pch_pll; i++) {
3284                 pll = &dev_priv->pch_plls[i];
3285                 if (pll->refcount == 0) {
3286                         DRM_DEBUG_KMS("CRTC:%d allocated PCH PLL %x\n",
3287                                       intel_crtc->base.base.id, pll->pll_reg);
3288                         goto found;
3289                 }
3290         }
3291
3292         return NULL;
3293
3294 found:
3295         intel_crtc->pch_pll = pll;
3296         pll->refcount++;
3297         DRM_DEBUG_DRIVER("using pll %d for pipe %d\n", i, intel_crtc->pipe);
3298 prepare: /* separate function? */
3299         DRM_DEBUG_DRIVER("switching PLL %x off\n", pll->pll_reg);
3300
3301         /* Wait for the clocks to stabilize before rewriting the regs */
3302         I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE);
3303         POSTING_READ(pll->pll_reg);
3304         udelay(150);
3305
3306         I915_WRITE(pll->fp0_reg, fp);
3307         I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE);
3308         pll->on = false;
3309         return pll;
3310 }
3311
3312 void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
3313 {
3314         struct drm_i915_private *dev_priv = dev->dev_private;
3315         int dslreg = PIPEDSL(pipe);
3316         u32 temp;
3317
3318         temp = I915_READ(dslreg);
3319         udelay(500);
3320         if (wait_for(I915_READ(dslreg) != temp, 5)) {
3321                 if (wait_for(I915_READ(dslreg) != temp, 5))
3322                         DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
3323         }
3324 }
3325
3326 static void ironlake_crtc_enable(struct drm_crtc *crtc)
3327 {
3328         struct drm_device *dev = crtc->dev;
3329         struct drm_i915_private *dev_priv = dev->dev_private;
3330         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3331         struct intel_encoder *encoder;
3332         int pipe = intel_crtc->pipe;
3333         int plane = intel_crtc->plane;
3334         u32 temp;
3335
3336         WARN_ON(!crtc->enabled);
3337
3338         if (intel_crtc->active)
3339                 return;
3340
3341         intel_crtc->active = true;
3342         intel_update_watermarks(dev);
3343
3344         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
3345                 temp = I915_READ(PCH_LVDS);
3346                 if ((temp & LVDS_PORT_EN) == 0)
3347                         I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
3348         }
3349
3350
3351         if (intel_crtc->config.has_pch_encoder) {
3352                 /* Note: FDI PLL enabling _must_ be done before we enable the
3353                  * cpu pipes, hence this is separate from all the other fdi/pch
3354                  * enabling. */
3355                 ironlake_fdi_pll_enable(intel_crtc);
3356         } else {
3357                 assert_fdi_tx_disabled(dev_priv, pipe);
3358                 assert_fdi_rx_disabled(dev_priv, pipe);
3359         }
3360
3361         for_each_encoder_on_crtc(dev, crtc, encoder)
3362                 if (encoder->pre_enable)
3363                         encoder->pre_enable(encoder);
3364
3365         /* Enable panel fitting for LVDS */
3366         if (dev_priv->pch_pf_size &&
3367             (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
3368              intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
3369                 /* Force use of hard-coded filter coefficients
3370                  * as some pre-programmed values are broken,
3371                  * e.g. x201.
3372                  */
3373                 if (IS_IVYBRIDGE(dev))
3374                         I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
3375                                                  PF_PIPE_SEL_IVB(pipe));
3376                 else
3377                         I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3378                 I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
3379                 I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
3380         }
3381
3382         /*
3383          * On ILK+ LUT must be loaded before the pipe is running but with
3384          * clocks enabled
3385          */
3386         intel_crtc_load_lut(crtc);
3387
3388         intel_enable_pipe(dev_priv, pipe,
3389                           intel_crtc->config.has_pch_encoder);
3390         intel_enable_plane(dev_priv, plane, pipe);
3391
3392         if (intel_crtc->config.has_pch_encoder)
3393                 ironlake_pch_enable(crtc);
3394
3395         mutex_lock(&dev->struct_mutex);
3396         intel_update_fbc(dev);
3397         mutex_unlock(&dev->struct_mutex);
3398
3399         intel_crtc_update_cursor(crtc, true);
3400
3401         for_each_encoder_on_crtc(dev, crtc, encoder)
3402                 encoder->enable(encoder);
3403
3404         if (HAS_PCH_CPT(dev))
3405                 intel_cpt_verify_modeset(dev, intel_crtc->pipe);
3406
3407         /*
3408          * There seems to be a race in PCH platform hw (at least on some
3409          * outputs) where an enabled pipe still completes any pageflip right
3410          * away (as if the pipe is off) instead of waiting for vblank. As soon
3411          * as the first vblank happend, everything works as expected. Hence just
3412          * wait for one vblank before returning to avoid strange things
3413          * happening.
3414          */
3415         intel_wait_for_vblank(dev, intel_crtc->pipe);
3416 }
3417
3418 static void haswell_crtc_enable(struct drm_crtc *crtc)
3419 {
3420         struct drm_device *dev = crtc->dev;
3421         struct drm_i915_private *dev_priv = dev->dev_private;
3422         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3423         struct intel_encoder *encoder;
3424         int pipe = intel_crtc->pipe;
3425         int plane = intel_crtc->plane;
3426
3427         WARN_ON(!crtc->enabled);
3428
3429         if (intel_crtc->active)
3430                 return;
3431
3432         intel_crtc->active = true;
3433         intel_update_watermarks(dev);
3434
3435         if (intel_crtc->config.has_pch_encoder)
3436                 dev_priv->display.fdi_link_train(crtc);
3437
3438         for_each_encoder_on_crtc(dev, crtc, encoder)
3439                 if (encoder->pre_enable)
3440                         encoder->pre_enable(encoder);
3441
3442         intel_ddi_enable_pipe_clock(intel_crtc);
3443
3444         /* Enable panel fitting for eDP */
3445         if (dev_priv->pch_pf_size &&
3446             intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
3447                 /* Force use of hard-coded filter coefficients
3448                  * as some pre-programmed values are broken,
3449                  * e.g. x201.
3450                  */
3451                 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
3452                                          PF_PIPE_SEL_IVB(pipe));
3453                 I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
3454                 I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
3455         }
3456
3457         /*
3458          * On ILK+ LUT must be loaded before the pipe is running but with
3459          * clocks enabled
3460          */
3461         intel_crtc_load_lut(crtc);
3462
3463         intel_ddi_set_pipe_settings(crtc);
3464         intel_ddi_enable_transcoder_func(crtc);
3465
3466         intel_enable_pipe(dev_priv, pipe,
3467                           intel_crtc->config.has_pch_encoder);
3468         intel_enable_plane(dev_priv, plane, pipe);
3469
3470         if (intel_crtc->config.has_pch_encoder)
3471                 lpt_pch_enable(crtc);
3472
3473         mutex_lock(&dev->struct_mutex);
3474         intel_update_fbc(dev);
3475         mutex_unlock(&dev->struct_mutex);
3476
3477         intel_crtc_update_cursor(crtc, true);
3478
3479         for_each_encoder_on_crtc(dev, crtc, encoder)
3480                 encoder->enable(encoder);
3481
3482         /*
3483          * There seems to be a race in PCH platform hw (at least on some
3484          * outputs) where an enabled pipe still completes any pageflip right
3485          * away (as if the pipe is off) instead of waiting for vblank. As soon
3486          * as the first vblank happend, everything works as expected. Hence just
3487          * wait for one vblank before returning to avoid strange things
3488          * happening.
3489          */
3490         intel_wait_for_vblank(dev, intel_crtc->pipe);
3491 }
3492
3493 static void ironlake_crtc_disable(struct drm_crtc *crtc)
3494 {
3495         struct drm_device *dev = crtc->dev;
3496         struct drm_i915_private *dev_priv = dev->dev_private;
3497         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3498         struct intel_encoder *encoder;
3499         int pipe = intel_crtc->pipe;
3500         int plane = intel_crtc->plane;
3501         u32 reg, temp;
3502
3503
3504         if (!intel_crtc->active)
3505                 return;
3506
3507         for_each_encoder_on_crtc(dev, crtc, encoder)
3508                 encoder->disable(encoder);
3509
3510         intel_crtc_wait_for_pending_flips(crtc);
3511         drm_vblank_off(dev, pipe);
3512         intel_crtc_update_cursor(crtc, false);
3513
3514         intel_disable_plane(dev_priv, plane, pipe);
3515
3516         if (dev_priv->cfb_plane == plane)
3517                 intel_disable_fbc(dev);
3518
3519         intel_disable_pipe(dev_priv, pipe);
3520
3521         /* Disable PF */
3522         I915_WRITE(PF_CTL(pipe), 0);
3523         I915_WRITE(PF_WIN_SZ(pipe), 0);
3524
3525         for_each_encoder_on_crtc(dev, crtc, encoder)
3526                 if (encoder->post_disable)
3527                         encoder->post_disable(encoder);
3528
3529         ironlake_fdi_disable(crtc);
3530
3531         ironlake_disable_pch_transcoder(dev_priv, pipe);
3532
3533         if (HAS_PCH_CPT(dev)) {
3534                 /* disable TRANS_DP_CTL */
3535                 reg = TRANS_DP_CTL(pipe);
3536                 temp = I915_READ(reg);
3537                 temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
3538                 temp |= TRANS_DP_PORT_SEL_NONE;
3539                 I915_WRITE(reg, temp);
3540
3541                 /* disable DPLL_SEL */
3542                 temp = I915_READ(PCH_DPLL_SEL);
3543                 switch (pipe) {
3544                 case 0:
3545                         temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
3546                         break;
3547                 case 1:
3548                         temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
3549                         break;
3550                 case 2:
3551                         /* C shares PLL A or B */
3552                         temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
3553                         break;
3554                 default:
3555                         BUG(); /* wtf */
3556                 }
3557                 I915_WRITE(PCH_DPLL_SEL, temp);
3558         }
3559
3560         /* disable PCH DPLL */
3561         intel_disable_pch_pll(intel_crtc);
3562
3563         ironlake_fdi_pll_disable(intel_crtc);
3564
3565         intel_crtc->active = false;
3566         intel_update_watermarks(dev);
3567
3568         mutex_lock(&dev->struct_mutex);
3569         intel_update_fbc(dev);
3570         mutex_unlock(&dev->struct_mutex);
3571 }
3572
3573 static void haswell_crtc_disable(struct drm_crtc *crtc)
3574 {
3575         struct drm_device *dev = crtc->dev;
3576         struct drm_i915_private *dev_priv = dev->dev_private;
3577         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3578         struct intel_encoder *encoder;
3579         int pipe = intel_crtc->pipe;
3580         int plane = intel_crtc->plane;
3581         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3582
3583         if (!intel_crtc->active)
3584                 return;
3585
3586         for_each_encoder_on_crtc(dev, crtc, encoder)
3587                 encoder->disable(encoder);
3588
3589         intel_crtc_wait_for_pending_flips(crtc);
3590         drm_vblank_off(dev, pipe);
3591         intel_crtc_update_cursor(crtc, false);
3592
3593         intel_disable_plane(dev_priv, plane, pipe);
3594
3595         if (dev_priv->cfb_plane == plane)
3596                 intel_disable_fbc(dev);
3597
3598         intel_disable_pipe(dev_priv, pipe);
3599
3600         intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
3601
3602         /* XXX: Once we have proper panel fitter state tracking implemented with
3603          * hardware state read/check support we should switch to only disable
3604          * the panel fitter when we know it's used. */
3605         if (intel_using_power_well(dev)) {
3606                 I915_WRITE(PF_CTL(pipe), 0);
3607                 I915_WRITE(PF_WIN_SZ(pipe), 0);
3608         }
3609
3610         intel_ddi_disable_pipe_clock(intel_crtc);
3611
3612         for_each_encoder_on_crtc(dev, crtc, encoder)
3613                 if (encoder->post_disable)
3614                         encoder->post_disable(encoder);
3615
3616         if (intel_crtc->config.has_pch_encoder) {
3617                 lpt_disable_pch_transcoder(dev_priv);
3618                 intel_ddi_fdi_disable(crtc);
3619         }
3620
3621         intel_crtc->active = false;
3622         intel_update_watermarks(dev);
3623
3624         mutex_lock(&dev->struct_mutex);
3625         intel_update_fbc(dev);
3626         mutex_unlock(&dev->struct_mutex);
3627 }
3628
3629 static void ironlake_crtc_off(struct drm_crtc *crtc)
3630 {
3631         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3632         intel_put_pch_pll(intel_crtc);
3633 }
3634
3635 static void haswell_crtc_off(struct drm_crtc *crtc)
3636 {
3637         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3638
3639         /* Stop saying we're using TRANSCODER_EDP because some other CRTC might
3640          * start using it. */
3641         intel_crtc->config.cpu_transcoder = (enum transcoder) intel_crtc->pipe;
3642
3643         intel_ddi_put_crtc_pll(crtc);
3644 }
3645
3646 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
3647 {
3648         if (!enable && intel_crtc->overlay) {
3649                 struct drm_device *dev = intel_crtc->base.dev;
3650                 struct drm_i915_private *dev_priv = dev->dev_private;
3651
3652                 mutex_lock(&dev->struct_mutex);
3653                 dev_priv->mm.interruptible = false;
3654                 (void) intel_overlay_switch_off(intel_crtc->overlay);
3655                 dev_priv->mm.interruptible = true;
3656                 mutex_unlock(&dev->struct_mutex);
3657         }
3658
3659         /* Let userspace switch the overlay on again. In most cases userspace
3660          * has to recompute where to put it anyway.
3661          */
3662 }
3663
3664 /**
3665  * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
3666  * cursor plane briefly if not already running after enabling the display
3667  * plane.
3668  * This workaround avoids occasional blank screens when self refresh is
3669  * enabled.
3670  */
3671 static void
3672 g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
3673 {
3674         u32 cntl = I915_READ(CURCNTR(pipe));
3675
3676         if ((cntl & CURSOR_MODE) == 0) {
3677                 u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
3678
3679                 I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
3680                 I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
3681                 intel_wait_for_vblank(dev_priv->dev, pipe);
3682                 I915_WRITE(CURCNTR(pipe), cntl);
3683                 I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
3684                 I915_WRITE(FW_BLC_SELF, fw_bcl_self);
3685         }
3686 }
3687
3688 static void i9xx_crtc_enable(struct drm_crtc *crtc)
3689 {
3690         struct drm_device *dev = crtc->dev;
3691         struct drm_i915_private *dev_priv = dev->dev_private;
3692         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3693         struct intel_encoder *encoder;
3694         int pipe = intel_crtc->pipe;
3695         int plane = intel_crtc->plane;
3696
3697         WARN_ON(!crtc->enabled);
3698
3699         if (intel_crtc->active)
3700                 return;
3701
3702         intel_crtc->active = true;
3703         intel_update_watermarks(dev);
3704
3705         intel_enable_pll(dev_priv, pipe);
3706
3707         for_each_encoder_on_crtc(dev, crtc, encoder)
3708                 if (encoder->pre_enable)
3709                         encoder->pre_enable(encoder);
3710
3711         intel_enable_pipe(dev_priv, pipe, false);
3712         intel_enable_plane(dev_priv, plane, pipe);
3713         if (IS_G4X(dev))
3714                 g4x_fixup_plane(dev_priv, pipe);
3715
3716         intel_crtc_load_lut(crtc);
3717         intel_update_fbc(dev);
3718
3719         /* Give the overlay scaler a chance to enable if it's on this pipe */
3720         intel_crtc_dpms_overlay(intel_crtc, true);
3721         intel_crtc_update_cursor(crtc, true);
3722
3723         for_each_encoder_on_crtc(dev, crtc, encoder)
3724                 encoder->enable(encoder);
3725 }
3726
3727 static void i9xx_pfit_disable(struct intel_crtc *crtc)
3728 {
3729         struct drm_device *dev = crtc->base.dev;
3730         struct drm_i915_private *dev_priv = dev->dev_private;
3731         enum pipe pipe;
3732         uint32_t pctl = I915_READ(PFIT_CONTROL);
3733
3734         assert_pipe_disabled(dev_priv, crtc->pipe);
3735
3736         if (INTEL_INFO(dev)->gen >= 4)
3737                 pipe = (pctl & PFIT_PIPE_MASK) >> PFIT_PIPE_SHIFT;
3738         else
3739                 pipe = PIPE_B;
3740
3741         if (pipe == crtc->pipe) {
3742                 DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n", pctl);
3743                 I915_WRITE(PFIT_CONTROL, 0);
3744         }
3745 }
3746
3747 static void i9xx_crtc_disable(struct drm_crtc *crtc)
3748 {
3749         struct drm_device *dev = crtc->dev;
3750         struct drm_i915_private *dev_priv = dev->dev_private;
3751         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3752         struct intel_encoder *encoder;
3753         int pipe = intel_crtc->pipe;
3754         int plane = intel_crtc->plane;
3755
3756         if (!intel_crtc->active)
3757                 return;
3758
3759         for_each_encoder_on_crtc(dev, crtc, encoder)
3760                 encoder->disable(encoder);
3761
3762         /* Give the overlay scaler a chance to disable if it's on this pipe */
3763         intel_crtc_wait_for_pending_flips(crtc);
3764         drm_vblank_off(dev, pipe);
3765         intel_crtc_dpms_overlay(intel_crtc, false);
3766         intel_crtc_update_cursor(crtc, false);
3767
3768         if (dev_priv->cfb_plane == plane)
3769                 intel_disable_fbc(dev);
3770
3771         intel_disable_plane(dev_priv, plane, pipe);
3772         intel_disable_pipe(dev_priv, pipe);
3773
3774         i9xx_pfit_disable(intel_crtc);
3775
3776         intel_disable_pll(dev_priv, pipe);
3777
3778         intel_crtc->active = false;
3779         intel_update_fbc(dev);
3780         intel_update_watermarks(dev);
3781 }
3782
3783 static void i9xx_crtc_off(struct drm_crtc *crtc)
3784 {
3785 }
3786
3787 static void intel_crtc_update_sarea(struct drm_crtc *crtc,
3788                                     bool enabled)
3789 {
3790         struct drm_device *dev = crtc->dev;
3791         struct drm_i915_master_private *master_priv;
3792         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3793         int pipe = intel_crtc->pipe;
3794
3795         if (!dev->primary->master)
3796                 return;
3797
3798         master_priv = dev->primary->master->driver_priv;
3799         if (!master_priv->sarea_priv)
3800                 return;
3801
3802         switch (pipe) {
3803         case 0:
3804                 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
3805                 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
3806                 break;
3807         case 1:
3808                 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
3809                 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
3810                 break;
3811         default:
3812                 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
3813                 break;
3814         }
3815 }
3816
3817 /**
3818  * Sets the power management mode of the pipe and plane.
3819  */
3820 void intel_crtc_update_dpms(struct drm_crtc *crtc)
3821 {
3822         struct drm_device *dev = crtc->dev;
3823         struct drm_i915_private *dev_priv = dev->dev_private;
3824         struct intel_encoder *intel_encoder;
3825         bool enable = false;
3826
3827         for_each_encoder_on_crtc(dev, crtc, intel_encoder)
3828                 enable |= intel_encoder->connectors_active;
3829
3830         if (enable)
3831                 dev_priv->display.crtc_enable(crtc);
3832         else
3833                 dev_priv->display.crtc_disable(crtc);
3834
3835         intel_crtc_update_sarea(crtc, enable);
3836 }
3837
3838 static void intel_crtc_disable(struct drm_crtc *crtc)
3839 {
3840         struct drm_device *dev = crtc->dev;
3841         struct drm_connector *connector;
3842         struct drm_i915_private *dev_priv = dev->dev_private;
3843         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3844
3845         /* crtc should still be enabled when we disable it. */
3846         WARN_ON(!crtc->enabled);
3847
3848         intel_crtc->eld_vld = false;
3849         dev_priv->display.crtc_disable(crtc);
3850         intel_crtc_update_sarea(crtc, false);
3851         dev_priv->display.off(crtc);
3852
3853         assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
3854         assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
3855
3856         if (crtc->fb) {
3857                 mutex_lock(&dev->struct_mutex);
3858                 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
3859                 mutex_unlock(&dev->struct_mutex);
3860                 crtc->fb = NULL;
3861         }
3862
3863         /* Update computed state. */
3864         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
3865                 if (!connector->encoder || !connector->encoder->crtc)
3866                         continue;
3867
3868                 if (connector->encoder->crtc != crtc)
3869                         continue;
3870
3871                 connector->dpms = DRM_MODE_DPMS_OFF;
3872                 to_intel_encoder(connector->encoder)->connectors_active = false;
3873         }
3874 }
3875
3876 void intel_modeset_disable(struct drm_device *dev)
3877 {
3878         struct drm_crtc *crtc;
3879
3880         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3881                 if (crtc->enabled)
3882                         intel_crtc_disable(crtc);
3883         }
3884 }
3885
3886 void intel_encoder_destroy(struct drm_encoder *encoder)
3887 {
3888         struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
3889
3890         drm_encoder_cleanup(encoder);
3891         kfree(intel_encoder);
3892 }
3893
3894 /* Simple dpms helper for encodres with just one connector, no cloning and only
3895  * one kind of off state. It clamps all !ON modes to fully OFF and changes the
3896  * state of the entire output pipe. */
3897 void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
3898 {
3899         if (mode == DRM_MODE_DPMS_ON) {
3900                 encoder->connectors_active = true;
3901
3902                 intel_crtc_update_dpms(encoder->base.crtc);
3903         } else {
3904                 encoder->connectors_active = false;
3905
3906                 intel_crtc_update_dpms(encoder->base.crtc);
3907         }
3908 }
3909
3910 /* Cross check the actual hw state with our own modeset state tracking (and it's
3911  * internal consistency). */
3912 static void intel_connector_check_state(struct intel_connector *connector)
3913 {
3914         if (connector->get_hw_state(connector)) {
3915                 struct intel_encoder *encoder = connector->encoder;
3916                 struct drm_crtc *crtc;
3917                 bool encoder_enabled;
3918                 enum pipe pipe;
3919
3920                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
3921                               connector->base.base.id,
3922                               drm_get_connector_name(&connector->base));
3923
3924                 WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
3925                      "wrong connector dpms state\n");
3926                 WARN(connector->base.encoder != &encoder->base,
3927                      "active connector not linked to encoder\n");
3928                 WARN(!encoder->connectors_active,
3929                      "encoder->connectors_active not set\n");
3930
3931                 encoder_enabled = encoder->get_hw_state(encoder, &pipe);
3932                 WARN(!encoder_enabled, "encoder not enabled\n");
3933                 if (WARN_ON(!encoder->base.crtc))
3934                         return;
3935
3936                 crtc = encoder->base.crtc;
3937
3938                 WARN(!crtc->enabled, "crtc not enabled\n");
3939                 WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
3940                 WARN(pipe != to_intel_crtc(crtc)->pipe,
3941                      "encoder active on the wrong pipe\n");
3942         }
3943 }
3944
3945 /* Even simpler default implementation, if there's really no special case to
3946  * consider. */
3947 void intel_connector_dpms(struct drm_connector *connector, int mode)
3948 {
3949         struct intel_encoder *encoder = intel_attached_encoder(connector);
3950
3951         /* All the simple cases only support two dpms states. */
3952         if (mode != DRM_MODE_DPMS_ON)
3953                 mode = DRM_MODE_DPMS_OFF;
3954
3955         if (mode == connector->dpms)
3956                 return;
3957
3958         connector->dpms = mode;
3959
3960         /* Only need to change hw state when actually enabled */
3961         if (encoder->base.crtc)
3962                 intel_encoder_dpms(encoder, mode);
3963         else
3964                 WARN_ON(encoder->connectors_active != false);
3965
3966         intel_modeset_check_state(connector->dev);
3967 }
3968
3969 /* Simple connector->get_hw_state implementation for encoders that support only
3970  * one connector and no cloning and hence the encoder state determines the state
3971  * of the connector. */
3972 bool intel_connector_get_hw_state(struct intel_connector *connector)
3973 {
3974         enum pipe pipe = 0;
3975         struct intel_encoder *encoder = connector->encoder;
3976
3977         return encoder->get_hw_state(encoder, &pipe);
3978 }
3979
3980 static bool intel_crtc_compute_config(struct drm_crtc *crtc,
3981                                       struct intel_crtc_config *pipe_config)
3982 {
3983         struct drm_device *dev = crtc->dev;
3984         struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
3985
3986         if (HAS_PCH_SPLIT(dev)) {
3987                 /* FDI link clock is fixed at 2.7G */
3988                 if (pipe_config->requested_mode.clock * 3
3989                     > IRONLAKE_FDI_FREQ * 4)
3990                         return false;
3991         }
3992
3993         /* All interlaced capable intel hw wants timings in frames. Note though
3994          * that intel_lvds_mode_fixup does some funny tricks with the crtc
3995          * timings, so we need to be careful not to clobber these.*/
3996         if (!pipe_config->timings_set)
3997                 drm_mode_set_crtcinfo(adjusted_mode, 0);
3998
3999         /* WaPruneModeWithIncorrectHsyncOffset: Cantiga+ cannot handle modes
4000          * with a hsync front porch of 0.
4001          */
4002         if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
4003                 adjusted_mode->hsync_start == adjusted_mode->hdisplay)
4004                 return false;
4005
4006         if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10*3) {
4007                 pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */
4008         } else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8*3) {
4009                 /* only a 8bpc pipe, with 6bpc dither through the panel fitter
4010                  * for lvds. */
4011                 pipe_config->pipe_bpp = 8*3;
4012         }
4013
4014         return true;
4015 }
4016
4017 static int valleyview_get_display_clock_speed(struct drm_device *dev)
4018 {
4019         return 400000; /* FIXME */
4020 }
4021
4022 static int i945_get_display_clock_speed(struct drm_device *dev)
4023 {
4024         return 400000;
4025 }
4026
4027 static int i915_get_display_clock_speed(struct drm_device *dev)
4028 {
4029         return 333000;
4030 }
4031
4032 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
4033 {
4034         return 200000;
4035 }
4036
4037 static int i915gm_get_display_clock_speed(struct drm_device *dev)
4038 {
4039         u16 gcfgc = 0;
4040
4041         pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
4042
4043         if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
4044                 return 133000;
4045         else {
4046                 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
4047                 case GC_DISPLAY_CLOCK_333_MHZ:
4048                         return 333000;
4049                 default:
4050                 case GC_DISPLAY_CLOCK_190_200_MHZ:
4051                         return 190000;
4052                 }
4053         }
4054 }
4055
4056 static int i865_get_display_clock_speed(struct drm_device *dev)
4057 {
4058         return 266000;
4059 }
4060
4061 static int i855_get_display_clock_speed(struct drm_device *dev)
4062 {
4063         u16 hpllcc = 0;
4064         /* Assume that the hardware is in the high speed state.  This
4065          * should be the default.
4066          */
4067         switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
4068         case GC_CLOCK_133_200:
4069         case GC_CLOCK_100_200:
4070                 return 200000;
4071         case GC_CLOCK_166_250:
4072                 return 250000;
4073         case GC_CLOCK_100_133:
4074                 return 133000;
4075         }
4076
4077         /* Shouldn't happen */
4078         return 0;
4079 }
4080
4081 static int i830_get_display_clock_speed(struct drm_device *dev)
4082 {
4083         return 133000;
4084 }
4085
4086 static void
4087 intel_reduce_ratio(uint32_t *num, uint32_t *den)
4088 {
4089         while (*num > 0xffffff || *den > 0xffffff) {
4090                 *num >>= 1;
4091                 *den >>= 1;
4092         }
4093 }
4094
4095 void
4096 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
4097                        int pixel_clock, int link_clock,
4098                        struct intel_link_m_n *m_n)
4099 {
4100         m_n->tu = 64;
4101         m_n->gmch_m = bits_per_pixel * pixel_clock;
4102         m_n->gmch_n = link_clock * nlanes * 8;
4103         intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
4104         m_n->link_m = pixel_clock;
4105         m_n->link_n = link_clock;
4106         intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
4107 }
4108
4109 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
4110 {
4111         if (i915_panel_use_ssc >= 0)
4112                 return i915_panel_use_ssc != 0;
4113         return dev_priv->lvds_use_ssc
4114                 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
4115 }
4116
4117 static int vlv_get_refclk(struct drm_crtc *crtc)
4118 {
4119         struct drm_device *dev = crtc->dev;
4120         struct drm_i915_private *dev_priv = dev->dev_private;
4121         int refclk = 27000; /* for DP & HDMI */
4122
4123         return 100000; /* only one validated so far */
4124
4125         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
4126                 refclk = 96000;
4127         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
4128                 if (intel_panel_use_ssc(dev_priv))
4129                         refclk = 100000;
4130                 else
4131                         refclk = 96000;
4132         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
4133                 refclk = 100000;
4134         }
4135
4136         return refclk;
4137 }
4138
4139 static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
4140 {
4141         struct drm_device *dev = crtc->dev;
4142         struct drm_i915_private *dev_priv = dev->dev_private;
4143         int refclk;
4144
4145         if (IS_VALLEYVIEW(dev)) {
4146                 refclk = vlv_get_refclk(crtc);
4147         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4148             intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
4149                 refclk = dev_priv->lvds_ssc_freq * 1000;
4150                 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
4151                               refclk / 1000);
4152         } else if (!IS_GEN2(dev)) {
4153                 refclk = 96000;
4154         } else {
4155                 refclk = 48000;
4156         }
4157
4158         return refclk;
4159 }
4160
4161 static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc *crtc)
4162 {
4163         unsigned dotclock = crtc->config.adjusted_mode.clock;
4164         struct dpll *clock = &crtc->config.dpll;
4165
4166         /* SDVO TV has fixed PLL values depend on its clock range,
4167            this mirrors vbios setting. */
4168         if (dotclock >= 100000 && dotclock < 140500) {
4169                 clock->p1 = 2;
4170                 clock->p2 = 10;
4171                 clock->n = 3;
4172                 clock->m1 = 16;
4173                 clock->m2 = 8;
4174         } else if (dotclock >= 140500 && dotclock <= 200000) {
4175                 clock->p1 = 1;
4176                 clock->p2 = 10;
4177                 clock->n = 6;
4178                 clock->m1 = 12;
4179                 clock->m2 = 8;
4180         }
4181
4182         crtc->config.clock_set = true;
4183 }
4184
4185 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
4186                                      intel_clock_t *reduced_clock)
4187 {
4188         struct drm_device *dev = crtc->base.dev;
4189         struct drm_i915_private *dev_priv = dev->dev_private;
4190         int pipe = crtc->pipe;
4191         u32 fp, fp2 = 0;
4192         struct dpll *clock = &crtc->config.dpll;
4193
4194         if (IS_PINEVIEW(dev)) {
4195                 fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
4196                 if (reduced_clock)
4197                         fp2 = (1 << reduced_clock->n) << 16 |
4198                                 reduced_clock->m1 << 8 | reduced_clock->m2;
4199         } else {
4200                 fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
4201                 if (reduced_clock)
4202                         fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
4203                                 reduced_clock->m2;
4204         }
4205
4206         I915_WRITE(FP0(pipe), fp);
4207
4208         crtc->lowfreq_avail = false;
4209         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4210             reduced_clock && i915_powersave) {
4211                 I915_WRITE(FP1(pipe), fp2);
4212                 crtc->lowfreq_avail = true;
4213         } else {
4214                 I915_WRITE(FP1(pipe), fp);
4215         }
4216 }
4217
4218 static void intel_dp_set_m_n(struct intel_crtc *crtc)
4219 {
4220         if (crtc->config.has_pch_encoder)
4221                 intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
4222         else
4223                 intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
4224 }
4225
4226 static void vlv_update_pll(struct intel_crtc *crtc)
4227 {
4228         struct drm_device *dev = crtc->base.dev;
4229         struct drm_i915_private *dev_priv = dev->dev_private;
4230         int pipe = crtc->pipe;
4231         u32 dpll, mdiv, pdiv;
4232         u32 bestn, bestm1, bestm2, bestp1, bestp2;
4233         bool is_sdvo;
4234         u32 temp;
4235
4236         mutex_lock(&dev_priv->dpio_lock);
4237
4238         is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
4239                 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
4240
4241         dpll = DPLL_VGA_MODE_DIS;
4242         dpll |= DPLL_EXT_BUFFER_ENABLE_VLV;
4243         dpll |= DPLL_REFA_CLK_ENABLE_VLV;
4244         dpll |= DPLL_INTEGRATED_CLOCK_VLV;
4245
4246         I915_WRITE(DPLL(pipe), dpll);
4247         POSTING_READ(DPLL(pipe));
4248
4249         bestn = crtc->config.dpll.n;
4250         bestm1 = crtc->config.dpll.m1;
4251         bestm2 = crtc->config.dpll.m2;
4252         bestp1 = crtc->config.dpll.p1;
4253         bestp2 = crtc->config.dpll.p2;
4254
4255         /*
4256          * In Valleyview PLL and program lane counter registers are exposed
4257          * through DPIO interface
4258          */
4259         mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
4260         mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
4261         mdiv |= ((bestn << DPIO_N_SHIFT));
4262         mdiv |= (1 << DPIO_POST_DIV_SHIFT);
4263         mdiv |= (1 << DPIO_K_SHIFT);
4264         mdiv |= DPIO_ENABLE_CALIBRATION;
4265         intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
4266
4267         intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), 0x01000000);
4268
4269         pdiv = (1 << DPIO_REFSEL_OVERRIDE) | (5 << DPIO_PLL_MODESEL_SHIFT) |
4270                 (3 << DPIO_BIAS_CURRENT_CTL_SHIFT) | (1<<20) |
4271                 (7 << DPIO_PLL_REFCLK_SEL_SHIFT) | (8 << DPIO_DRIVER_CTL_SHIFT) |
4272                 (5 << DPIO_CLK_BIAS_CTL_SHIFT);
4273         intel_dpio_write(dev_priv, DPIO_REFSFR(pipe), pdiv);
4274
4275         intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x005f003b);
4276
4277         dpll |= DPLL_VCO_ENABLE;
4278         I915_WRITE(DPLL(pipe), dpll);
4279         POSTING_READ(DPLL(pipe));
4280         if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
4281                 DRM_ERROR("DPLL %d failed to lock\n", pipe);
4282
4283         intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x620);
4284
4285         if (crtc->config.has_dp_encoder)
4286                 intel_dp_set_m_n(crtc);
4287
4288         I915_WRITE(DPLL(pipe), dpll);
4289
4290         /* Wait for the clocks to stabilize. */
4291         POSTING_READ(DPLL(pipe));
4292         udelay(150);
4293
4294         temp = 0;
4295         if (is_sdvo) {
4296                 temp = 0;
4297                 if (crtc->config.pixel_multiplier > 1) {
4298                         temp = (crtc->config.pixel_multiplier - 1)
4299                                 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4300                 }
4301         }
4302         I915_WRITE(DPLL_MD(pipe), temp);
4303         POSTING_READ(DPLL_MD(pipe));
4304
4305         /* Now program lane control registers */
4306         if(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)
4307            || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI)) {
4308                 temp = 0x1000C4;
4309                 if(pipe == 1)
4310                         temp |= (1 << 21);
4311                 intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL1, temp);
4312         }
4313
4314         if(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP)) {
4315                 temp = 0x1000C4;
4316                 if(pipe == 1)
4317                         temp |= (1 << 21);
4318                 intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL2, temp);
4319         }
4320
4321         mutex_unlock(&dev_priv->dpio_lock);
4322 }
4323
4324 static void i9xx_update_pll(struct intel_crtc *crtc,
4325                             intel_clock_t *reduced_clock,
4326                             int num_connectors)
4327 {
4328         struct drm_device *dev = crtc->base.dev;
4329         struct drm_i915_private *dev_priv = dev->dev_private;
4330         struct intel_encoder *encoder;
4331         int pipe = crtc->pipe;
4332         u32 dpll;
4333         bool is_sdvo;
4334         struct dpll *clock = &crtc->config.dpll;
4335
4336         i9xx_update_pll_dividers(crtc, reduced_clock);
4337
4338         is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
4339                 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
4340
4341         dpll = DPLL_VGA_MODE_DIS;
4342
4343         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
4344                 dpll |= DPLLB_MODE_LVDS;
4345         else
4346                 dpll |= DPLLB_MODE_DAC_SERIAL;
4347
4348         if (is_sdvo) {
4349                 if ((crtc->config.pixel_multiplier > 1) &&
4350                     (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))) {
4351                         dpll |= (crtc->config.pixel_multiplier - 1)
4352                                 << SDVO_MULTIPLIER_SHIFT_HIRES;
4353                 }
4354                 dpll |= DPLL_DVO_HIGH_SPEED;
4355         }
4356         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
4357                 dpll |= DPLL_DVO_HIGH_SPEED;
4358
4359         /* compute bitmask from p1 value */
4360         if (IS_PINEVIEW(dev))
4361                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
4362         else {
4363                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4364                 if (IS_G4X(dev) && reduced_clock)
4365                         dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
4366         }
4367         switch (clock->p2) {
4368         case 5:
4369                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
4370                 break;
4371         case 7:
4372                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
4373                 break;
4374         case 10:
4375                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
4376                 break;
4377         case 14:
4378                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
4379                 break;
4380         }
4381         if (INTEL_INFO(dev)->gen >= 4)
4382                 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
4383
4384         if (is_sdvo && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT))
4385                 dpll |= PLL_REF_INPUT_TVCLKINBC;
4386         else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT))
4387                 /* XXX: just matching BIOS for now */
4388                 /*      dpll |= PLL_REF_INPUT_TVCLKINBC; */
4389                 dpll |= 3;
4390         else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4391                  intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4392                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4393         else
4394                 dpll |= PLL_REF_INPUT_DREFCLK;
4395
4396         dpll |= DPLL_VCO_ENABLE;
4397         I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
4398         POSTING_READ(DPLL(pipe));
4399         udelay(150);
4400
4401         for_each_encoder_on_crtc(dev, &crtc->base, encoder)
4402                 if (encoder->pre_pll_enable)
4403                         encoder->pre_pll_enable(encoder);
4404
4405         if (crtc->config.has_dp_encoder)
4406                 intel_dp_set_m_n(crtc);
4407
4408         I915_WRITE(DPLL(pipe), dpll);
4409
4410         /* Wait for the clocks to stabilize. */
4411         POSTING_READ(DPLL(pipe));
4412         udelay(150);
4413
4414         if (INTEL_INFO(dev)->gen >= 4) {
4415                 u32 temp = 0;
4416                 if (is_sdvo) {
4417                         temp = 0;
4418                         if (crtc->config.pixel_multiplier > 1) {
4419                                 temp = (crtc->config.pixel_multiplier - 1)
4420                                         << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4421                         }
4422                 }
4423                 I915_WRITE(DPLL_MD(pipe), temp);
4424         } else {
4425                 /* The pixel multiplier can only be updated once the
4426                  * DPLL is enabled and the clocks are stable.
4427                  *
4428                  * So write it again.
4429                  */
4430                 I915_WRITE(DPLL(pipe), dpll);
4431         }
4432 }
4433
4434 static void i8xx_update_pll(struct intel_crtc *crtc,
4435                             struct drm_display_mode *adjusted_mode,
4436                             intel_clock_t *reduced_clock,
4437                             int num_connectors)
4438 {
4439         struct drm_device *dev = crtc->base.dev;
4440         struct drm_i915_private *dev_priv = dev->dev_private;
4441         struct intel_encoder *encoder;
4442         int pipe = crtc->pipe;
4443         u32 dpll;
4444         struct dpll *clock = &crtc->config.dpll;
4445
4446         i9xx_update_pll_dividers(crtc, reduced_clock);
4447
4448         dpll = DPLL_VGA_MODE_DIS;
4449
4450         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
4451                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4452         } else {
4453                 if (clock->p1 == 2)
4454                         dpll |= PLL_P1_DIVIDE_BY_TWO;
4455                 else
4456                         dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4457                 if (clock->p2 == 4)
4458                         dpll |= PLL_P2_DIVIDE_BY_4;
4459         }
4460
4461         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4462                  intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4463                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4464         else
4465                 dpll |= PLL_REF_INPUT_DREFCLK;
4466
4467         dpll |= DPLL_VCO_ENABLE;
4468         I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
4469         POSTING_READ(DPLL(pipe));
4470         udelay(150);
4471
4472         for_each_encoder_on_crtc(dev, &crtc->base, encoder)
4473                 if (encoder->pre_pll_enable)
4474                         encoder->pre_pll_enable(encoder);
4475
4476         I915_WRITE(DPLL(pipe), dpll);
4477
4478         /* Wait for the clocks to stabilize. */
4479         POSTING_READ(DPLL(pipe));
4480         udelay(150);
4481
4482         /* The pixel multiplier can only be updated once the
4483          * DPLL is enabled and the clocks are stable.
4484          *
4485          * So write it again.
4486          */
4487         I915_WRITE(DPLL(pipe), dpll);
4488 }
4489
4490 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
4491                                    struct drm_display_mode *mode,
4492                                    struct drm_display_mode *adjusted_mode)
4493 {
4494         struct drm_device *dev = intel_crtc->base.dev;
4495         struct drm_i915_private *dev_priv = dev->dev_private;
4496         enum pipe pipe = intel_crtc->pipe;
4497         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
4498         uint32_t vsyncshift;
4499
4500         if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
4501                 /* the chip adds 2 halflines automatically */
4502                 adjusted_mode->crtc_vtotal -= 1;
4503                 adjusted_mode->crtc_vblank_end -= 1;
4504                 vsyncshift = adjusted_mode->crtc_hsync_start
4505                              - adjusted_mode->crtc_htotal / 2;
4506         } else {
4507                 vsyncshift = 0;
4508         }
4509
4510         if (INTEL_INFO(dev)->gen > 3)
4511                 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
4512
4513         I915_WRITE(HTOTAL(cpu_transcoder),
4514                    (adjusted_mode->crtc_hdisplay - 1) |
4515                    ((adjusted_mode->crtc_htotal - 1) << 16));
4516         I915_WRITE(HBLANK(cpu_transcoder),
4517                    (adjusted_mode->crtc_hblank_start - 1) |
4518                    ((adjusted_mode->crtc_hblank_end - 1) << 16));
4519         I915_WRITE(HSYNC(cpu_transcoder),
4520                    (adjusted_mode->crtc_hsync_start - 1) |
4521                    ((adjusted_mode->crtc_hsync_end - 1) << 16));
4522
4523         I915_WRITE(VTOTAL(cpu_transcoder),
4524                    (adjusted_mode->crtc_vdisplay - 1) |
4525                    ((adjusted_mode->crtc_vtotal - 1) << 16));
4526         I915_WRITE(VBLANK(cpu_transcoder),
4527                    (adjusted_mode->crtc_vblank_start - 1) |
4528                    ((adjusted_mode->crtc_vblank_end - 1) << 16));
4529         I915_WRITE(VSYNC(cpu_transcoder),
4530                    (adjusted_mode->crtc_vsync_start - 1) |
4531                    ((adjusted_mode->crtc_vsync_end - 1) << 16));
4532
4533         /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
4534          * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
4535          * documented on the DDI_FUNC_CTL register description, EDP Input Select
4536          * bits. */
4537         if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
4538             (pipe == PIPE_B || pipe == PIPE_C))
4539                 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
4540
4541         /* pipesrc controls the size that is scaled from, which should
4542          * always be the user's requested size.
4543          */
4544         I915_WRITE(PIPESRC(pipe),
4545                    ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
4546 }
4547
4548 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
4549 {
4550         struct drm_device *dev = intel_crtc->base.dev;
4551         struct drm_i915_private *dev_priv = dev->dev_private;
4552         uint32_t pipeconf;
4553
4554         pipeconf = I915_READ(PIPECONF(intel_crtc->pipe));
4555
4556         if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) {
4557                 /* Enable pixel doubling when the dot clock is > 90% of the (display)
4558                  * core speed.
4559                  *
4560                  * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
4561                  * pipe == 0 check?
4562                  */
4563                 if (intel_crtc->config.requested_mode.clock >
4564                     dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
4565                         pipeconf |= PIPECONF_DOUBLE_WIDE;
4566                 else
4567                         pipeconf &= ~PIPECONF_DOUBLE_WIDE;
4568         }
4569
4570         /* default to 8bpc */
4571         pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
4572         if (intel_crtc->config.has_dp_encoder) {
4573                 if (intel_crtc->config.dither) {
4574                         pipeconf |= PIPECONF_6BPC |
4575                                     PIPECONF_DITHER_EN |
4576                                     PIPECONF_DITHER_TYPE_SP;
4577                 }
4578         }
4579
4580         if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(&intel_crtc->base,
4581                                                       INTEL_OUTPUT_EDP)) {
4582                 if (intel_crtc->config.dither) {
4583                         pipeconf |= PIPECONF_6BPC |
4584                                         PIPECONF_ENABLE |
4585                                         I965_PIPECONF_ACTIVE;
4586                 }
4587         }
4588
4589         if (HAS_PIPE_CXSR(dev)) {
4590                 if (intel_crtc->lowfreq_avail) {
4591                         DRM_DEBUG_KMS("enabling CxSR downclocking\n");
4592                         pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
4593                 } else {
4594                         DRM_DEBUG_KMS("disabling CxSR downclocking\n");
4595                         pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
4596                 }
4597         }
4598
4599         pipeconf &= ~PIPECONF_INTERLACE_MASK;
4600         if (!IS_GEN2(dev) &&
4601             intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
4602                 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
4603         else
4604                 pipeconf |= PIPECONF_PROGRESSIVE;
4605
4606         if (IS_VALLEYVIEW(dev)) {
4607                 if (intel_crtc->config.limited_color_range)
4608                         pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
4609                 else
4610                         pipeconf &= ~PIPECONF_COLOR_RANGE_SELECT;
4611         }
4612
4613         I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
4614         POSTING_READ(PIPECONF(intel_crtc->pipe));
4615 }
4616
4617 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
4618                               int x, int y,
4619                               struct drm_framebuffer *fb)
4620 {
4621         struct drm_device *dev = crtc->dev;
4622         struct drm_i915_private *dev_priv = dev->dev_private;
4623         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4624         struct drm_display_mode *adjusted_mode =
4625                 &intel_crtc->config.adjusted_mode;
4626         struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
4627         int pipe = intel_crtc->pipe;
4628         int plane = intel_crtc->plane;
4629         int refclk, num_connectors = 0;
4630         intel_clock_t clock, reduced_clock;
4631         u32 dspcntr;
4632         bool ok, has_reduced_clock = false, is_sdvo = false;
4633         bool is_lvds = false, is_tv = false;
4634         struct intel_encoder *encoder;
4635         const intel_limit_t *limit;
4636         int ret;
4637
4638         for_each_encoder_on_crtc(dev, crtc, encoder) {
4639                 switch (encoder->type) {
4640                 case INTEL_OUTPUT_LVDS:
4641                         is_lvds = true;
4642                         break;
4643                 case INTEL_OUTPUT_SDVO:
4644                 case INTEL_OUTPUT_HDMI:
4645                         is_sdvo = true;
4646                         if (encoder->needs_tv_clock)
4647                                 is_tv = true;
4648                         break;
4649                 case INTEL_OUTPUT_TVOUT:
4650                         is_tv = true;
4651                         break;
4652                 }
4653
4654                 num_connectors++;
4655         }
4656
4657         refclk = i9xx_get_refclk(crtc, num_connectors);
4658
4659         /*
4660          * Returns a set of divisors for the desired target clock with the given
4661          * refclk, or FALSE.  The returned values represent the clock equation:
4662          * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
4663          */
4664         limit = intel_limit(crtc, refclk);
4665         ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
4666                              &clock);
4667         if (!ok) {
4668                 DRM_ERROR("Couldn't find PLL settings for mode!\n");
4669                 return -EINVAL;
4670         }
4671
4672         /* Ensure that the cursor is valid for the new mode before changing... */
4673         intel_crtc_update_cursor(crtc, true);
4674
4675         if (is_lvds && dev_priv->lvds_downclock_avail) {
4676                 /*
4677                  * Ensure we match the reduced clock's P to the target clock.
4678                  * If the clocks don't match, we can't switch the display clock
4679                  * by using the FP0/FP1. In such case we will disable the LVDS
4680                  * downclock feature.
4681                 */
4682                 has_reduced_clock = limit->find_pll(limit, crtc,
4683                                                     dev_priv->lvds_downclock,
4684                                                     refclk,
4685                                                     &clock,
4686                                                     &reduced_clock);
4687         }
4688         /* Compat-code for transition, will disappear. */
4689         if (!intel_crtc->config.clock_set) {
4690                 intel_crtc->config.dpll.n = clock.n;
4691                 intel_crtc->config.dpll.m1 = clock.m1;
4692                 intel_crtc->config.dpll.m2 = clock.m2;
4693                 intel_crtc->config.dpll.p1 = clock.p1;
4694                 intel_crtc->config.dpll.p2 = clock.p2;
4695         }
4696
4697         if (is_sdvo && is_tv)
4698                 i9xx_adjust_sdvo_tv_clock(intel_crtc);
4699
4700         if (IS_GEN2(dev))
4701                 i8xx_update_pll(intel_crtc, adjusted_mode,
4702                                 has_reduced_clock ? &reduced_clock : NULL,
4703                                 num_connectors);
4704         else if (IS_VALLEYVIEW(dev))
4705                 vlv_update_pll(intel_crtc);
4706         else
4707                 i9xx_update_pll(intel_crtc,
4708                                 has_reduced_clock ? &reduced_clock : NULL,
4709                                 num_connectors);
4710
4711         /* Set up the display plane register */
4712         dspcntr = DISPPLANE_GAMMA_ENABLE;
4713
4714         if (!IS_VALLEYVIEW(dev)) {
4715                 if (pipe == 0)
4716                         dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
4717                 else
4718                         dspcntr |= DISPPLANE_SEL_PIPE_B;
4719         }
4720
4721         DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
4722         drm_mode_debug_printmodeline(mode);
4723
4724         intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
4725
4726         /* pipesrc and dspsize control the size that is scaled from,
4727          * which should always be the user's requested size.
4728          */
4729         I915_WRITE(DSPSIZE(plane),
4730                    ((mode->vdisplay - 1) << 16) |
4731                    (mode->hdisplay - 1));
4732         I915_WRITE(DSPPOS(plane), 0);
4733
4734         i9xx_set_pipeconf(intel_crtc);
4735
4736         intel_enable_pipe(dev_priv, pipe, false);
4737
4738         intel_wait_for_vblank(dev, pipe);
4739
4740         I915_WRITE(DSPCNTR(plane), dspcntr);
4741         POSTING_READ(DSPCNTR(plane));
4742
4743         ret = intel_pipe_set_base(crtc, x, y, fb);
4744
4745         intel_update_watermarks(dev);
4746
4747         return ret;
4748 }
4749
4750 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
4751                                  struct intel_crtc_config *pipe_config)
4752 {
4753         struct drm_device *dev = crtc->base.dev;
4754         struct drm_i915_private *dev_priv = dev->dev_private;
4755         uint32_t tmp;
4756
4757         tmp = I915_READ(PIPECONF(crtc->pipe));
4758         if (!(tmp & PIPECONF_ENABLE))
4759                 return false;
4760
4761         return true;
4762 }
4763
4764 static void ironlake_init_pch_refclk(struct drm_device *dev)
4765 {
4766         struct drm_i915_private *dev_priv = dev->dev_private;
4767         struct drm_mode_config *mode_config = &dev->mode_config;
4768         struct intel_encoder *encoder;
4769         u32 val, final;
4770         bool has_lvds = false;
4771         bool has_cpu_edp = false;
4772         bool has_pch_edp = false;
4773         bool has_panel = false;
4774         bool has_ck505 = false;
4775         bool can_ssc = false;
4776
4777         /* We need to take the global config into account */
4778         list_for_each_entry(encoder, &mode_config->encoder_list,
4779                             base.head) {
4780                 switch (encoder->type) {
4781                 case INTEL_OUTPUT_LVDS:
4782                         has_panel = true;
4783                         has_lvds = true;
4784                         break;
4785                 case INTEL_OUTPUT_EDP:
4786                         has_panel = true;
4787                         if (intel_encoder_is_pch_edp(&encoder->base))
4788                                 has_pch_edp = true;
4789                         else
4790                                 has_cpu_edp = true;
4791                         break;
4792                 }
4793         }
4794
4795         if (HAS_PCH_IBX(dev)) {
4796                 has_ck505 = dev_priv->display_clock_mode;
4797                 can_ssc = has_ck505;
4798         } else {
4799                 has_ck505 = false;
4800                 can_ssc = true;
4801         }
4802
4803         DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
4804                       has_panel, has_lvds, has_pch_edp, has_cpu_edp,
4805                       has_ck505);
4806
4807         /* Ironlake: try to setup display ref clock before DPLL
4808          * enabling. This is only under driver's control after
4809          * PCH B stepping, previous chipset stepping should be
4810          * ignoring this setting.
4811          */
4812         val = I915_READ(PCH_DREF_CONTROL);
4813
4814         /* As we must carefully and slowly disable/enable each source in turn,
4815          * compute the final state we want first and check if we need to
4816          * make any changes at all.
4817          */
4818         final = val;
4819         final &= ~DREF_NONSPREAD_SOURCE_MASK;
4820         if (has_ck505)
4821                 final |= DREF_NONSPREAD_CK505_ENABLE;
4822         else
4823                 final |= DREF_NONSPREAD_SOURCE_ENABLE;
4824
4825         final &= ~DREF_SSC_SOURCE_MASK;
4826         final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4827         final &= ~DREF_SSC1_ENABLE;
4828
4829         if (has_panel) {
4830                 final |= DREF_SSC_SOURCE_ENABLE;
4831
4832                 if (intel_panel_use_ssc(dev_priv) && can_ssc)
4833                         final |= DREF_SSC1_ENABLE;
4834
4835                 if (has_cpu_edp) {
4836                         if (intel_panel_use_ssc(dev_priv) && can_ssc)
4837                                 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
4838                         else
4839                                 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
4840                 } else
4841                         final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4842         } else {
4843                 final |= DREF_SSC_SOURCE_DISABLE;
4844                 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4845         }
4846
4847         if (final == val)
4848                 return;
4849
4850         /* Always enable nonspread source */
4851         val &= ~DREF_NONSPREAD_SOURCE_MASK;
4852
4853         if (has_ck505)
4854                 val |= DREF_NONSPREAD_CK505_ENABLE;
4855         else
4856                 val |= DREF_NONSPREAD_SOURCE_ENABLE;
4857
4858         if (has_panel) {
4859                 val &= ~DREF_SSC_SOURCE_MASK;
4860                 val |= DREF_SSC_SOURCE_ENABLE;
4861
4862                 /* SSC must be turned on before enabling the CPU output  */
4863                 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
4864                         DRM_DEBUG_KMS("Using SSC on panel\n");
4865                         val |= DREF_SSC1_ENABLE;
4866                 } else
4867                         val &= ~DREF_SSC1_ENABLE;
4868
4869                 /* Get SSC going before enabling the outputs */
4870                 I915_WRITE(PCH_DREF_CONTROL, val);
4871                 POSTING_READ(PCH_DREF_CONTROL);
4872                 udelay(200);
4873
4874                 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4875
4876                 /* Enable CPU source on CPU attached eDP */
4877                 if (has_cpu_edp) {
4878                         if (intel_panel_use_ssc(dev_priv) && can_ssc) {
4879                                 DRM_DEBUG_KMS("Using SSC on eDP\n");
4880                                 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
4881                         }
4882                         else
4883                                 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
4884                 } else
4885                         val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4886
4887                 I915_WRITE(PCH_DREF_CONTROL, val);
4888                 POSTING_READ(PCH_DREF_CONTROL);
4889                 udelay(200);
4890         } else {
4891                 DRM_DEBUG_KMS("Disabling SSC entirely\n");
4892
4893                 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4894
4895                 /* Turn off CPU output */
4896                 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4897
4898                 I915_WRITE(PCH_DREF_CONTROL, val);
4899                 POSTING_READ(PCH_DREF_CONTROL);
4900                 udelay(200);
4901
4902                 /* Turn off the SSC source */
4903                 val &= ~DREF_SSC_SOURCE_MASK;
4904                 val |= DREF_SSC_SOURCE_DISABLE;
4905
4906                 /* Turn off SSC1 */
4907                 val &= ~DREF_SSC1_ENABLE;
4908
4909                 I915_WRITE(PCH_DREF_CONTROL, val);
4910                 POSTING_READ(PCH_DREF_CONTROL);
4911                 udelay(200);
4912         }
4913
4914         BUG_ON(val != final);
4915 }
4916
4917 /* Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O. */
4918 static void lpt_init_pch_refclk(struct drm_device *dev)
4919 {
4920         struct drm_i915_private *dev_priv = dev->dev_private;
4921         struct drm_mode_config *mode_config = &dev->mode_config;
4922         struct intel_encoder *encoder;
4923         bool has_vga = false;
4924         bool is_sdv = false;
4925         u32 tmp;
4926
4927         list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
4928                 switch (encoder->type) {
4929                 case INTEL_OUTPUT_ANALOG:
4930                         has_vga = true;
4931                         break;
4932                 }
4933         }
4934
4935         if (!has_vga)
4936                 return;
4937
4938         mutex_lock(&dev_priv->dpio_lock);
4939
4940         /* XXX: Rip out SDV support once Haswell ships for real. */
4941         if (IS_HASWELL(dev) && (dev->pci_device & 0xFF00) == 0x0C00)
4942                 is_sdv = true;
4943
4944         tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
4945         tmp &= ~SBI_SSCCTL_DISABLE;
4946         tmp |= SBI_SSCCTL_PATHALT;
4947         intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
4948
4949         udelay(24);
4950
4951         tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
4952         tmp &= ~SBI_SSCCTL_PATHALT;
4953         intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
4954
4955         if (!is_sdv) {
4956                 tmp = I915_READ(SOUTH_CHICKEN2);
4957                 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
4958                 I915_WRITE(SOUTH_CHICKEN2, tmp);
4959
4960                 if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
4961                                        FDI_MPHY_IOSFSB_RESET_STATUS, 100))
4962                         DRM_ERROR("FDI mPHY reset assert timeout\n");
4963
4964                 tmp = I915_READ(SOUTH_CHICKEN2);
4965                 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
4966                 I915_WRITE(SOUTH_CHICKEN2, tmp);
4967
4968                 if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
4969                                         FDI_MPHY_IOSFSB_RESET_STATUS) == 0,
4970                                        100))
4971                         DRM_ERROR("FDI mPHY reset de-assert timeout\n");
4972         }
4973
4974         tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
4975         tmp &= ~(0xFF << 24);
4976         tmp |= (0x12 << 24);
4977         intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
4978
4979         if (is_sdv) {
4980                 tmp = intel_sbi_read(dev_priv, 0x800C, SBI_MPHY);
4981                 tmp |= 0x7FFF;
4982                 intel_sbi_write(dev_priv, 0x800C, tmp, SBI_MPHY);
4983         }
4984
4985         tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
4986         tmp |= (1 << 11);
4987         intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
4988
4989         tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
4990         tmp |= (1 << 11);
4991         intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
4992
4993         if (is_sdv) {
4994                 tmp = intel_sbi_read(dev_priv, 0x2038, SBI_MPHY);
4995                 tmp |= (0x3F << 24) | (0xF << 20) | (0xF << 16);
4996                 intel_sbi_write(dev_priv, 0x2038, tmp, SBI_MPHY);
4997
4998                 tmp = intel_sbi_read(dev_priv, 0x2138, SBI_MPHY);
4999                 tmp |= (0x3F << 24) | (0xF << 20) | (0xF << 16);
5000                 intel_sbi_write(dev_priv, 0x2138, tmp, SBI_MPHY);
5001
5002                 tmp = intel_sbi_read(dev_priv, 0x203C, SBI_MPHY);
5003                 tmp |= (0x3F << 8);
5004                 intel_sbi_write(dev_priv, 0x203C, tmp, SBI_MPHY);
5005
5006                 tmp = intel_sbi_read(dev_priv, 0x213C, SBI_MPHY);
5007                 tmp |= (0x3F << 8);
5008                 intel_sbi_write(dev_priv, 0x213C, tmp, SBI_MPHY);
5009         }
5010
5011         tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
5012         tmp |= (1 << 24) | (1 << 21) | (1 << 18);
5013         intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
5014
5015         tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
5016         tmp |= (1 << 24) | (1 << 21) | (1 << 18);
5017         intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
5018
5019         if (!is_sdv) {
5020                 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
5021                 tmp &= ~(7 << 13);
5022                 tmp |= (5 << 13);
5023                 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
5024
5025                 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
5026                 tmp &= ~(7 << 13);
5027                 tmp |= (5 << 13);
5028                 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
5029         }
5030
5031         tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
5032         tmp &= ~0xFF;
5033         tmp |= 0x1C;
5034         intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
5035
5036         tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
5037         tmp &= ~0xFF;
5038         tmp |= 0x1C;
5039         intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
5040
5041         tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
5042         tmp &= ~(0xFF << 16);
5043         tmp |= (0x1C << 16);
5044         intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
5045
5046         tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
5047         tmp &= ~(0xFF << 16);
5048         tmp |= (0x1C << 16);
5049         intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
5050
5051         if (!is_sdv) {
5052                 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
5053                 tmp |= (1 << 27);
5054                 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
5055
5056                 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
5057                 tmp |= (1 << 27);
5058                 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
5059
5060                 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
5061                 tmp &= ~(0xF << 28);
5062                 tmp |= (4 << 28);
5063                 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
5064
5065                 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
5066                 tmp &= ~(0xF << 28);
5067                 tmp |= (4 << 28);
5068                 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
5069         }
5070
5071         /* ULT uses SBI_GEN0, but ULT doesn't have VGA, so we don't care. */
5072         tmp = intel_sbi_read(dev_priv, SBI_DBUFF0, SBI_ICLK);
5073         tmp |= SBI_DBUFF0_ENABLE;
5074         intel_sbi_write(dev_priv, SBI_DBUFF0, tmp, SBI_ICLK);
5075
5076         mutex_unlock(&dev_priv->dpio_lock);
5077 }
5078
5079 /*
5080  * Initialize reference clocks when the driver loads
5081  */
5082 void intel_init_pch_refclk(struct drm_device *dev)
5083 {
5084         if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
5085                 ironlake_init_pch_refclk(dev);
5086         else if (HAS_PCH_LPT(dev))
5087                 lpt_init_pch_refclk(dev);
5088 }
5089
5090 static int ironlake_get_refclk(struct drm_crtc *crtc)
5091 {
5092         struct drm_device *dev = crtc->dev;
5093         struct drm_i915_private *dev_priv = dev->dev_private;
5094         struct intel_encoder *encoder;
5095         struct intel_encoder *edp_encoder = NULL;
5096         int num_connectors = 0;
5097         bool is_lvds = false;
5098
5099         for_each_encoder_on_crtc(dev, crtc, encoder) {
5100                 switch (encoder->type) {
5101                 case INTEL_OUTPUT_LVDS:
5102                         is_lvds = true;
5103                         break;
5104                 case INTEL_OUTPUT_EDP:
5105                         edp_encoder = encoder;
5106                         break;
5107                 }
5108                 num_connectors++;
5109         }
5110
5111         if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
5112                 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
5113                               dev_priv->lvds_ssc_freq);
5114                 return dev_priv->lvds_ssc_freq * 1000;
5115         }
5116
5117         return 120000;
5118 }
5119
5120 static void ironlake_set_pipeconf(struct drm_crtc *crtc,
5121                                   struct drm_display_mode *adjusted_mode,
5122                                   bool dither)
5123 {
5124         struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5125         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5126         int pipe = intel_crtc->pipe;
5127         uint32_t val;
5128
5129         val = I915_READ(PIPECONF(pipe));
5130
5131         val &= ~PIPECONF_BPC_MASK;
5132         switch (intel_crtc->config.pipe_bpp) {
5133         case 18:
5134                 val |= PIPECONF_6BPC;
5135                 break;
5136         case 24:
5137                 val |= PIPECONF_8BPC;
5138                 break;
5139         case 30:
5140                 val |= PIPECONF_10BPC;
5141                 break;
5142         case 36:
5143                 val |= PIPECONF_12BPC;
5144                 break;
5145         default:
5146                 /* Case prevented by intel_choose_pipe_bpp_dither. */
5147                 BUG();
5148         }
5149
5150         val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
5151         if (dither)
5152                 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
5153
5154         val &= ~PIPECONF_INTERLACE_MASK;
5155         if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
5156                 val |= PIPECONF_INTERLACED_ILK;
5157         else
5158                 val |= PIPECONF_PROGRESSIVE;
5159
5160         if (intel_crtc->config.limited_color_range)
5161                 val |= PIPECONF_COLOR_RANGE_SELECT;
5162         else
5163                 val &= ~PIPECONF_COLOR_RANGE_SELECT;
5164
5165         I915_WRITE(PIPECONF(pipe), val);
5166         POSTING_READ(PIPECONF(pipe));
5167 }
5168
5169 /*
5170  * Set up the pipe CSC unit.
5171  *
5172  * Currently only full range RGB to limited range RGB conversion
5173  * is supported, but eventually this should handle various
5174  * RGB<->YCbCr scenarios as well.
5175  */
5176 static void intel_set_pipe_csc(struct drm_crtc *crtc)
5177 {
5178         struct drm_device *dev = crtc->dev;
5179         struct drm_i915_private *dev_priv = dev->dev_private;
5180         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5181         int pipe = intel_crtc->pipe;
5182         uint16_t coeff = 0x7800; /* 1.0 */
5183
5184         /*
5185          * TODO: Check what kind of values actually come out of the pipe
5186          * with these coeff/postoff values and adjust to get the best
5187          * accuracy. Perhaps we even need to take the bpc value into
5188          * consideration.
5189          */
5190
5191         if (intel_crtc->config.limited_color_range)
5192                 coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
5193
5194         /*
5195          * GY/GU and RY/RU should be the other way around according
5196          * to BSpec, but reality doesn't agree. Just set them up in
5197          * a way that results in the correct picture.
5198          */
5199         I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16);
5200         I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0);
5201
5202         I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff);
5203         I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0);
5204
5205         I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0);
5206         I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16);
5207
5208         I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
5209         I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
5210         I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
5211
5212         if (INTEL_INFO(dev)->gen > 6) {
5213                 uint16_t postoff = 0;
5214
5215                 if (intel_crtc->config.limited_color_range)
5216                         postoff = (16 * (1 << 13) / 255) & 0x1fff;
5217
5218                 I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
5219                 I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
5220                 I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
5221
5222                 I915_WRITE(PIPE_CSC_MODE(pipe), 0);
5223         } else {
5224                 uint32_t mode = CSC_MODE_YUV_TO_RGB;
5225
5226                 if (intel_crtc->config.limited_color_range)
5227                         mode |= CSC_BLACK_SCREEN_OFFSET;
5228
5229                 I915_WRITE(PIPE_CSC_MODE(pipe), mode);
5230         }
5231 }
5232
5233 static void haswell_set_pipeconf(struct drm_crtc *crtc,
5234                                  struct drm_display_mode *adjusted_mode,
5235                                  bool dither)
5236 {
5237         struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5238         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5239         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
5240         uint32_t val;
5241
5242         val = I915_READ(PIPECONF(cpu_transcoder));
5243
5244         val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
5245         if (dither)
5246                 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
5247
5248         val &= ~PIPECONF_INTERLACE_MASK_HSW;
5249         if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
5250                 val |= PIPECONF_INTERLACED_ILK;
5251         else
5252                 val |= PIPECONF_PROGRESSIVE;
5253
5254         I915_WRITE(PIPECONF(cpu_transcoder), val);
5255         POSTING_READ(PIPECONF(cpu_transcoder));
5256 }
5257
5258 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
5259                                     struct drm_display_mode *adjusted_mode,
5260                                     intel_clock_t *clock,
5261                                     bool *has_reduced_clock,
5262                                     intel_clock_t *reduced_clock)
5263 {
5264         struct drm_device *dev = crtc->dev;
5265         struct drm_i915_private *dev_priv = dev->dev_private;
5266         struct intel_encoder *intel_encoder;
5267         int refclk;
5268         const intel_limit_t *limit;
5269         bool ret, is_sdvo = false, is_tv = false, is_lvds = false;
5270
5271         for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
5272                 switch (intel_encoder->type) {
5273                 case INTEL_OUTPUT_LVDS:
5274                         is_lvds = true;
5275                         break;
5276                 case INTEL_OUTPUT_SDVO:
5277                 case INTEL_OUTPUT_HDMI:
5278                         is_sdvo = true;
5279                         if (intel_encoder->needs_tv_clock)
5280                                 is_tv = true;
5281                         break;
5282                 case INTEL_OUTPUT_TVOUT:
5283                         is_tv = true;
5284                         break;
5285                 }
5286         }
5287
5288         refclk = ironlake_get_refclk(crtc);
5289
5290         /*
5291          * Returns a set of divisors for the desired target clock with the given
5292          * refclk, or FALSE.  The returned values represent the clock equation:
5293          * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
5294          */
5295         limit = intel_limit(crtc, refclk);
5296         ret = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
5297                               clock);
5298         if (!ret)
5299                 return false;
5300
5301         if (is_lvds && dev_priv->lvds_downclock_avail) {
5302                 /*
5303                  * Ensure we match the reduced clock's P to the target clock.
5304                  * If the clocks don't match, we can't switch the display clock
5305                  * by using the FP0/FP1. In such case we will disable the LVDS
5306                  * downclock feature.
5307                 */
5308                 *has_reduced_clock = limit->find_pll(limit, crtc,
5309                                                      dev_priv->lvds_downclock,
5310                                                      refclk,
5311                                                      clock,
5312                                                      reduced_clock);
5313         }
5314
5315         if (is_sdvo && is_tv)
5316                 i9xx_adjust_sdvo_tv_clock(to_intel_crtc(crtc));
5317
5318         return true;
5319 }
5320
5321 static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
5322 {
5323         struct drm_i915_private *dev_priv = dev->dev_private;
5324         uint32_t temp;
5325
5326         temp = I915_READ(SOUTH_CHICKEN1);
5327         if (temp & FDI_BC_BIFURCATION_SELECT)
5328                 return;
5329
5330         WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
5331         WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
5332
5333         temp |= FDI_BC_BIFURCATION_SELECT;
5334         DRM_DEBUG_KMS("enabling fdi C rx\n");
5335         I915_WRITE(SOUTH_CHICKEN1, temp);
5336         POSTING_READ(SOUTH_CHICKEN1);
5337 }
5338
5339 static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc)
5340 {
5341         struct drm_device *dev = intel_crtc->base.dev;
5342         struct drm_i915_private *dev_priv = dev->dev_private;
5343         struct intel_crtc *pipe_B_crtc =
5344                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
5345
5346         DRM_DEBUG_KMS("checking fdi config on pipe %i, lanes %i\n",
5347                       intel_crtc->pipe, intel_crtc->fdi_lanes);
5348         if (intel_crtc->fdi_lanes > 4) {
5349                 DRM_DEBUG_KMS("invalid fdi lane config on pipe %i: %i lanes\n",
5350                               intel_crtc->pipe, intel_crtc->fdi_lanes);
5351                 /* Clamp lanes to avoid programming the hw with bogus values. */
5352                 intel_crtc->fdi_lanes = 4;
5353
5354                 return false;
5355         }
5356
5357         if (INTEL_INFO(dev)->num_pipes == 2)
5358                 return true;
5359
5360         switch (intel_crtc->pipe) {
5361         case PIPE_A:
5362                 return true;
5363         case PIPE_B:
5364                 if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
5365                     intel_crtc->fdi_lanes > 2) {
5366                         DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
5367                                       intel_crtc->pipe, intel_crtc->fdi_lanes);
5368                         /* Clamp lanes to avoid programming the hw with bogus values. */
5369                         intel_crtc->fdi_lanes = 2;
5370
5371                         return false;
5372                 }
5373
5374                 if (intel_crtc->fdi_lanes > 2)
5375                         WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
5376                 else
5377                         cpt_enable_fdi_bc_bifurcation(dev);
5378
5379                 return true;
5380         case PIPE_C:
5381                 if (!pipe_B_crtc->base.enabled || pipe_B_crtc->fdi_lanes <= 2) {
5382                         if (intel_crtc->fdi_lanes > 2) {
5383                                 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
5384                                               intel_crtc->pipe, intel_crtc->fdi_lanes);
5385                                 /* Clamp lanes to avoid programming the hw with bogus values. */
5386                                 intel_crtc->fdi_lanes = 2;
5387
5388                                 return false;
5389                         }
5390                 } else {
5391                         DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
5392                         return false;
5393                 }
5394
5395                 cpt_enable_fdi_bc_bifurcation(dev);
5396
5397                 return true;
5398         default:
5399                 BUG();
5400         }
5401 }
5402
5403 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
5404 {
5405         /*
5406          * Account for spread spectrum to avoid
5407          * oversubscribing the link. Max center spread
5408          * is 2.5%; use 5% for safety's sake.
5409          */
5410         u32 bps = target_clock * bpp * 21 / 20;
5411         return bps / (link_bw * 8) + 1;
5412 }
5413
5414 void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
5415                                   struct intel_link_m_n *m_n)
5416 {
5417         struct drm_device *dev = crtc->base.dev;
5418         struct drm_i915_private *dev_priv = dev->dev_private;
5419         int pipe = crtc->pipe;
5420
5421         I915_WRITE(TRANSDATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
5422         I915_WRITE(TRANSDATA_N1(pipe), m_n->gmch_n);
5423         I915_WRITE(TRANSDPLINK_M1(pipe), m_n->link_m);
5424         I915_WRITE(TRANSDPLINK_N1(pipe), m_n->link_n);
5425 }
5426
5427 void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
5428                                   struct intel_link_m_n *m_n)
5429 {
5430         struct drm_device *dev = crtc->base.dev;
5431         struct drm_i915_private *dev_priv = dev->dev_private;
5432         int pipe = crtc->pipe;
5433         enum transcoder transcoder = crtc->config.cpu_transcoder;
5434
5435         if (INTEL_INFO(dev)->gen >= 5) {
5436                 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
5437                 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
5438                 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
5439                 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
5440         } else {
5441                 I915_WRITE(PIPE_GMCH_DATA_M(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
5442                 I915_WRITE(PIPE_GMCH_DATA_N(pipe), m_n->gmch_n);
5443                 I915_WRITE(PIPE_DP_LINK_M(pipe), m_n->link_m);
5444                 I915_WRITE(PIPE_DP_LINK_N(pipe), m_n->link_n);
5445         }
5446 }
5447
5448 static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
5449 {
5450         struct drm_device *dev = crtc->dev;
5451         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5452         struct drm_display_mode *adjusted_mode =
5453                 &intel_crtc->config.adjusted_mode;
5454         struct intel_link_m_n m_n = {0};
5455         int target_clock, lane, link_bw;
5456
5457         /* FDI is a binary signal running at ~2.7GHz, encoding
5458          * each output octet as 10 bits. The actual frequency
5459          * is stored as a divider into a 100MHz clock, and the
5460          * mode pixel clock is stored in units of 1KHz.
5461          * Hence the bw of each lane in terms of the mode signal
5462          * is:
5463          */
5464         link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
5465
5466         if (intel_crtc->config.pixel_target_clock)
5467                 target_clock = intel_crtc->config.pixel_target_clock;
5468         else
5469                 target_clock = adjusted_mode->clock;
5470
5471         lane = ironlake_get_lanes_required(target_clock, link_bw,
5472                                            intel_crtc->config.pipe_bpp);
5473
5474         intel_crtc->fdi_lanes = lane;
5475
5476         if (intel_crtc->config.pixel_multiplier > 1)
5477                 link_bw *= intel_crtc->config.pixel_multiplier;
5478         intel_link_compute_m_n(intel_crtc->config.pipe_bpp, lane, target_clock,
5479                                link_bw, &m_n);
5480
5481         intel_cpu_transcoder_set_m_n(intel_crtc, &m_n);
5482 }
5483
5484 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
5485                                       intel_clock_t *clock, u32 *fp,
5486                                       intel_clock_t *reduced_clock, u32 *fp2)
5487 {
5488         struct drm_crtc *crtc = &intel_crtc->base;
5489         struct drm_device *dev = crtc->dev;
5490         struct drm_i915_private *dev_priv = dev->dev_private;
5491         struct intel_encoder *intel_encoder;
5492         uint32_t dpll;
5493         int factor, num_connectors = 0;
5494         bool is_lvds = false, is_sdvo = false, is_tv = false;
5495
5496         for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
5497                 switch (intel_encoder->type) {
5498                 case INTEL_OUTPUT_LVDS:
5499                         is_lvds = true;
5500                         break;
5501                 case INTEL_OUTPUT_SDVO:
5502                 case INTEL_OUTPUT_HDMI:
5503                         is_sdvo = true;
5504                         if (intel_encoder->needs_tv_clock)
5505                                 is_tv = true;
5506                         break;
5507                 case INTEL_OUTPUT_TVOUT:
5508                         is_tv = true;
5509                         break;
5510                 }
5511
5512                 num_connectors++;
5513         }
5514
5515         /* Enable autotuning of the PLL clock (if permissible) */
5516         factor = 21;
5517         if (is_lvds) {
5518                 if ((intel_panel_use_ssc(dev_priv) &&
5519                      dev_priv->lvds_ssc_freq == 100) ||
5520                     (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
5521                         factor = 25;
5522         } else if (is_sdvo && is_tv)
5523                 factor = 20;
5524
5525         if (clock->m < factor * clock->n)
5526                 *fp |= FP_CB_TUNE;
5527
5528         if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
5529                 *fp2 |= FP_CB_TUNE;
5530
5531         dpll = 0;
5532
5533         if (is_lvds)
5534                 dpll |= DPLLB_MODE_LVDS;
5535         else
5536                 dpll |= DPLLB_MODE_DAC_SERIAL;
5537         if (is_sdvo) {
5538                 if (intel_crtc->config.pixel_multiplier > 1) {
5539                         dpll |= (intel_crtc->config.pixel_multiplier - 1)
5540                                 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
5541                 }
5542                 dpll |= DPLL_DVO_HIGH_SPEED;
5543         }
5544         if (intel_crtc->config.has_dp_encoder &&
5545             intel_crtc->config.has_pch_encoder)
5546                 dpll |= DPLL_DVO_HIGH_SPEED;
5547
5548         /* compute bitmask from p1 value */
5549         dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5550         /* also FPA1 */
5551         dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
5552
5553         switch (clock->p2) {
5554         case 5:
5555                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
5556                 break;
5557         case 7:
5558                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
5559                 break;
5560         case 10:
5561                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
5562                 break;
5563         case 14:
5564                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
5565                 break;
5566         }
5567
5568         if (is_sdvo && is_tv)
5569                 dpll |= PLL_REF_INPUT_TVCLKINBC;
5570         else if (is_tv)
5571                 /* XXX: just matching BIOS for now */
5572                 /*      dpll |= PLL_REF_INPUT_TVCLKINBC; */
5573                 dpll |= 3;
5574         else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5575                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5576         else
5577                 dpll |= PLL_REF_INPUT_DREFCLK;
5578
5579         return dpll;
5580 }
5581
5582 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
5583                                   int x, int y,
5584                                   struct drm_framebuffer *fb)
5585 {
5586         struct drm_device *dev = crtc->dev;
5587         struct drm_i915_private *dev_priv = dev->dev_private;
5588         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5589         struct drm_display_mode *adjusted_mode =
5590                 &intel_crtc->config.adjusted_mode;
5591         struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
5592         int pipe = intel_crtc->pipe;
5593         int plane = intel_crtc->plane;
5594         int num_connectors = 0;
5595         intel_clock_t clock, reduced_clock;
5596         u32 dpll, fp = 0, fp2 = 0;
5597         bool ok, has_reduced_clock = false;
5598         bool is_lvds = false;
5599         struct intel_encoder *encoder;
5600         int ret;
5601         bool dither, fdi_config_ok;
5602
5603         for_each_encoder_on_crtc(dev, crtc, encoder) {
5604                 switch (encoder->type) {
5605                 case INTEL_OUTPUT_LVDS:
5606                         is_lvds = true;
5607                         break;
5608                 }
5609
5610                 num_connectors++;
5611         }
5612
5613         WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
5614              "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
5615
5616         intel_crtc->config.cpu_transcoder = pipe;
5617
5618         ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
5619                                      &has_reduced_clock, &reduced_clock);
5620         if (!ok) {
5621                 DRM_ERROR("Couldn't find PLL settings for mode!\n");
5622                 return -EINVAL;
5623         }
5624         /* Compat-code for transition, will disappear. */
5625         if (!intel_crtc->config.clock_set) {
5626                 intel_crtc->config.dpll.n = clock.n;
5627                 intel_crtc->config.dpll.m1 = clock.m1;
5628                 intel_crtc->config.dpll.m2 = clock.m2;
5629                 intel_crtc->config.dpll.p1 = clock.p1;
5630                 intel_crtc->config.dpll.p2 = clock.p2;
5631         }
5632
5633         /* Ensure that the cursor is valid for the new mode before changing... */
5634         intel_crtc_update_cursor(crtc, true);
5635
5636         /* determine panel color depth */
5637         dither = intel_crtc->config.dither;
5638         if (is_lvds && dev_priv->lvds_dither)
5639                 dither = true;
5640
5641         fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
5642         if (has_reduced_clock)
5643                 fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
5644                         reduced_clock.m2;
5645
5646         dpll = ironlake_compute_dpll(intel_crtc, &clock, &fp, &reduced_clock,
5647                                      has_reduced_clock ? &fp2 : NULL);
5648
5649         DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
5650         drm_mode_debug_printmodeline(mode);
5651
5652         /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
5653         if (intel_crtc->config.has_pch_encoder) {
5654                 struct intel_pch_pll *pll;
5655
5656                 pll = intel_get_pch_pll(intel_crtc, dpll, fp);
5657                 if (pll == NULL) {
5658                         DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
5659                                          pipe);
5660                         return -EINVAL;
5661                 }
5662         } else
5663                 intel_put_pch_pll(intel_crtc);
5664
5665         if (intel_crtc->config.has_dp_encoder)
5666                 intel_dp_set_m_n(intel_crtc);
5667
5668         for_each_encoder_on_crtc(dev, crtc, encoder)
5669                 if (encoder->pre_pll_enable)
5670                         encoder->pre_pll_enable(encoder);
5671
5672         if (intel_crtc->pch_pll) {
5673                 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
5674
5675                 /* Wait for the clocks to stabilize. */
5676                 POSTING_READ(intel_crtc->pch_pll->pll_reg);
5677                 udelay(150);
5678
5679                 /* The pixel multiplier can only be updated once the
5680                  * DPLL is enabled and the clocks are stable.
5681                  *
5682                  * So write it again.
5683                  */
5684                 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
5685         }
5686
5687         intel_crtc->lowfreq_avail = false;
5688         if (intel_crtc->pch_pll) {
5689                 if (is_lvds && has_reduced_clock && i915_powersave) {
5690                         I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
5691                         intel_crtc->lowfreq_avail = true;
5692                 } else {
5693                         I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
5694                 }
5695         }
5696
5697         intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
5698
5699         /* Note, this also computes intel_crtc->fdi_lanes which is used below in
5700          * ironlake_check_fdi_lanes. */
5701         intel_crtc->fdi_lanes = 0;
5702         if (intel_crtc->config.has_pch_encoder)
5703                 ironlake_fdi_set_m_n(crtc);
5704
5705         fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
5706
5707         ironlake_set_pipeconf(crtc, adjusted_mode, dither);
5708
5709         intel_wait_for_vblank(dev, pipe);
5710
5711         /* Set up the display plane register */
5712         I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
5713         POSTING_READ(DSPCNTR(plane));
5714
5715         ret = intel_pipe_set_base(crtc, x, y, fb);
5716
5717         intel_update_watermarks(dev);
5718
5719         intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
5720
5721         return fdi_config_ok ? ret : -EINVAL;
5722 }
5723
5724 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
5725                                      struct intel_crtc_config *pipe_config)
5726 {
5727         struct drm_device *dev = crtc->base.dev;
5728         struct drm_i915_private *dev_priv = dev->dev_private;
5729         uint32_t tmp;
5730
5731         tmp = I915_READ(PIPECONF(crtc->pipe));
5732         if (!(tmp & PIPECONF_ENABLE))
5733                 return false;
5734
5735         if (I915_READ(TRANSCONF(crtc->pipe)) & TRANS_ENABLE)
5736                 pipe_config->has_pch_encoder = true;
5737
5738         return true;
5739 }
5740
5741 static void haswell_modeset_global_resources(struct drm_device *dev)
5742 {
5743         struct drm_i915_private *dev_priv = dev->dev_private;
5744         bool enable = false;
5745         struct intel_crtc *crtc;
5746         struct intel_encoder *encoder;
5747
5748         list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
5749                 if (crtc->pipe != PIPE_A && crtc->base.enabled)
5750                         enable = true;
5751                 /* XXX: Should check for edp transcoder here, but thanks to init
5752                  * sequence that's not yet available. Just in case desktop eDP
5753                  * on PORT D is possible on haswell, too. */
5754         }
5755
5756         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
5757                             base.head) {
5758                 if (encoder->type != INTEL_OUTPUT_EDP &&
5759                     encoder->connectors_active)
5760                         enable = true;
5761         }
5762
5763         /* Even the eDP panel fitter is outside the always-on well. */
5764         if (dev_priv->pch_pf_size)
5765                 enable = true;
5766
5767         intel_set_power_well(dev, enable);
5768 }
5769
5770 static int haswell_crtc_mode_set(struct drm_crtc *crtc,
5771                                  int x, int y,
5772                                  struct drm_framebuffer *fb)
5773 {
5774         struct drm_device *dev = crtc->dev;
5775         struct drm_i915_private *dev_priv = dev->dev_private;
5776         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5777         struct drm_display_mode *adjusted_mode =
5778                 &intel_crtc->config.adjusted_mode;
5779         struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
5780         int pipe = intel_crtc->pipe;
5781         int plane = intel_crtc->plane;
5782         int num_connectors = 0;
5783         bool is_cpu_edp = false;
5784         struct intel_encoder *encoder;
5785         int ret;
5786         bool dither;
5787
5788         for_each_encoder_on_crtc(dev, crtc, encoder) {
5789                 switch (encoder->type) {
5790                 case INTEL_OUTPUT_EDP:
5791                         if (!intel_encoder_is_pch_edp(&encoder->base))
5792                                 is_cpu_edp = true;
5793                         break;
5794                 }
5795
5796                 num_connectors++;
5797         }
5798
5799         if (is_cpu_edp)
5800                 intel_crtc->config.cpu_transcoder = TRANSCODER_EDP;
5801         else
5802                 intel_crtc->config.cpu_transcoder = pipe;
5803
5804         /* We are not sure yet this won't happen. */
5805         WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n",
5806              INTEL_PCH_TYPE(dev));
5807
5808         WARN(num_connectors != 1, "%d connectors attached to pipe %c\n",
5809              num_connectors, pipe_name(pipe));
5810
5811         WARN_ON(I915_READ(PIPECONF(intel_crtc->config.cpu_transcoder)) &
5812                 (PIPECONF_ENABLE | I965_PIPECONF_ACTIVE));
5813
5814         WARN_ON(I915_READ(DSPCNTR(plane)) & DISPLAY_PLANE_ENABLE);
5815
5816         if (!intel_ddi_pll_mode_set(crtc, adjusted_mode->clock))
5817                 return -EINVAL;
5818
5819         /* Ensure that the cursor is valid for the new mode before changing... */
5820         intel_crtc_update_cursor(crtc, true);
5821
5822         /* determine panel color depth */
5823         dither = intel_crtc->config.dither;
5824
5825         DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
5826         drm_mode_debug_printmodeline(mode);
5827
5828         if (intel_crtc->config.has_dp_encoder)
5829                 intel_dp_set_m_n(intel_crtc);
5830
5831         intel_crtc->lowfreq_avail = false;
5832
5833         intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
5834
5835         if (intel_crtc->config.has_pch_encoder)
5836                 ironlake_fdi_set_m_n(crtc);
5837
5838         haswell_set_pipeconf(crtc, adjusted_mode, dither);
5839
5840         intel_set_pipe_csc(crtc);
5841
5842         /* Set up the display plane register */
5843         I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE);
5844         POSTING_READ(DSPCNTR(plane));
5845
5846         ret = intel_pipe_set_base(crtc, x, y, fb);
5847
5848         intel_update_watermarks(dev);
5849
5850         intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
5851
5852         return ret;
5853 }
5854
5855 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
5856                                     struct intel_crtc_config *pipe_config)
5857 {
5858         struct drm_device *dev = crtc->base.dev;
5859         struct drm_i915_private *dev_priv = dev->dev_private;
5860         uint32_t tmp;
5861
5862         tmp = I915_READ(PIPECONF(crtc->config.cpu_transcoder));
5863         if (!(tmp & PIPECONF_ENABLE))
5864                 return false;
5865
5866         /*
5867          * aswell has only FDI/PCH transcoder A. It is which is connected to
5868          * DDI E. So just check whether this pipe is wired to DDI E and whether
5869          * the PCH transcoder is on.
5870          */
5871         tmp = I915_READ(TRANS_DDI_FUNC_CTL(crtc->pipe));
5872         if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
5873             I915_READ(TRANSCONF(PIPE_A)) & TRANS_ENABLE)
5874                 pipe_config->has_pch_encoder = true;
5875
5876
5877         return true;
5878 }
5879
5880 static int intel_crtc_mode_set(struct drm_crtc *crtc,
5881                                int x, int y,
5882                                struct drm_framebuffer *fb)
5883 {
5884         struct drm_device *dev = crtc->dev;
5885         struct drm_i915_private *dev_priv = dev->dev_private;
5886         struct drm_encoder_helper_funcs *encoder_funcs;
5887         struct intel_encoder *encoder;
5888         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5889         struct drm_display_mode *adjusted_mode =
5890                 &intel_crtc->config.adjusted_mode;
5891         struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
5892         int pipe = intel_crtc->pipe;
5893         int ret;
5894
5895         drm_vblank_pre_modeset(dev, pipe);
5896
5897         ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
5898
5899         drm_vblank_post_modeset(dev, pipe);
5900
5901         if (ret != 0)
5902                 return ret;
5903
5904         for_each_encoder_on_crtc(dev, crtc, encoder) {
5905                 DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
5906                         encoder->base.base.id,
5907                         drm_get_encoder_name(&encoder->base),
5908                         mode->base.id, mode->name);
5909                 if (encoder->mode_set) {
5910                         encoder->mode_set(encoder);
5911                 } else {
5912                         encoder_funcs = encoder->base.helper_private;
5913                         encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
5914                 }
5915         }
5916
5917         return 0;
5918 }
5919
5920 static bool intel_eld_uptodate(struct drm_connector *connector,
5921                                int reg_eldv, uint32_t bits_eldv,
5922                                int reg_elda, uint32_t bits_elda,
5923                                int reg_edid)
5924 {
5925         struct drm_i915_private *dev_priv = connector->dev->dev_private;
5926         uint8_t *eld = connector->eld;
5927         uint32_t i;
5928
5929         i = I915_READ(reg_eldv);
5930         i &= bits_eldv;
5931
5932         if (!eld[0])
5933                 return !i;
5934
5935         if (!i)
5936                 return false;
5937
5938         i = I915_READ(reg_elda);
5939         i &= ~bits_elda;
5940         I915_WRITE(reg_elda, i);
5941
5942         for (i = 0; i < eld[2]; i++)
5943                 if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
5944                         return false;
5945
5946         return true;
5947 }
5948
5949 static void g4x_write_eld(struct drm_connector *connector,
5950                           struct drm_crtc *crtc)
5951 {
5952         struct drm_i915_private *dev_priv = connector->dev->dev_private;
5953         uint8_t *eld = connector->eld;
5954         uint32_t eldv;
5955         uint32_t len;
5956         uint32_t i;
5957
5958         i = I915_READ(G4X_AUD_VID_DID);
5959
5960         if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
5961                 eldv = G4X_ELDV_DEVCL_DEVBLC;
5962         else
5963                 eldv = G4X_ELDV_DEVCTG;
5964
5965         if (intel_eld_uptodate(connector,
5966                                G4X_AUD_CNTL_ST, eldv,
5967                                G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
5968                                G4X_HDMIW_HDMIEDID))
5969                 return;
5970
5971         i = I915_READ(G4X_AUD_CNTL_ST);
5972         i &= ~(eldv | G4X_ELD_ADDR);
5973         len = (i >> 9) & 0x1f;          /* ELD buffer size */
5974         I915_WRITE(G4X_AUD_CNTL_ST, i);
5975
5976         if (!eld[0])
5977                 return;
5978
5979         len = min_t(uint8_t, eld[2], len);
5980         DRM_DEBUG_DRIVER("ELD size %d\n", len);
5981         for (i = 0; i < len; i++)
5982                 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
5983
5984         i = I915_READ(G4X_AUD_CNTL_ST);
5985         i |= eldv;
5986         I915_WRITE(G4X_AUD_CNTL_ST, i);
5987 }
5988
5989 static void haswell_write_eld(struct drm_connector *connector,
5990                                      struct drm_crtc *crtc)
5991 {
5992         struct drm_i915_private *dev_priv = connector->dev->dev_private;
5993         uint8_t *eld = connector->eld;
5994         struct drm_device *dev = crtc->dev;
5995         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5996         uint32_t eldv;
5997         uint32_t i;
5998         int len;
5999         int pipe = to_intel_crtc(crtc)->pipe;
6000         int tmp;
6001
6002         int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
6003         int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe);
6004         int aud_config = HSW_AUD_CFG(pipe);
6005         int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
6006
6007
6008         DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n");
6009
6010         /* Audio output enable */
6011         DRM_DEBUG_DRIVER("HDMI audio: enable codec\n");
6012         tmp = I915_READ(aud_cntrl_st2);
6013         tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
6014         I915_WRITE(aud_cntrl_st2, tmp);
6015
6016         /* Wait for 1 vertical blank */
6017         intel_wait_for_vblank(dev, pipe);
6018
6019         /* Set ELD valid state */
6020         tmp = I915_READ(aud_cntrl_st2);
6021         DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%8x\n", tmp);
6022         tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
6023         I915_WRITE(aud_cntrl_st2, tmp);
6024         tmp = I915_READ(aud_cntrl_st2);
6025         DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%8x\n", tmp);
6026
6027         /* Enable HDMI mode */
6028         tmp = I915_READ(aud_config);
6029         DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%8x\n", tmp);
6030         /* clear N_programing_enable and N_value_index */
6031         tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
6032         I915_WRITE(aud_config, tmp);
6033
6034         DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
6035
6036         eldv = AUDIO_ELD_VALID_A << (pipe * 4);
6037         intel_crtc->eld_vld = true;
6038
6039         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
6040                 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
6041                 eld[5] |= (1 << 2);     /* Conn_Type, 0x1 = DisplayPort */
6042                 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
6043         } else
6044                 I915_WRITE(aud_config, 0);
6045
6046         if (intel_eld_uptodate(connector,
6047                                aud_cntrl_st2, eldv,
6048                                aud_cntl_st, IBX_ELD_ADDRESS,
6049                                hdmiw_hdmiedid))
6050                 return;
6051
6052         i = I915_READ(aud_cntrl_st2);
6053         i &= ~eldv;
6054         I915_WRITE(aud_cntrl_st2, i);
6055
6056         if (!eld[0])
6057                 return;
6058
6059         i = I915_READ(aud_cntl_st);
6060         i &= ~IBX_ELD_ADDRESS;
6061         I915_WRITE(aud_cntl_st, i);
6062         i = (i >> 29) & DIP_PORT_SEL_MASK;              /* DIP_Port_Select, 0x1 = PortB */
6063         DRM_DEBUG_DRIVER("port num:%d\n", i);
6064
6065         len = min_t(uint8_t, eld[2], 21);       /* 84 bytes of hw ELD buffer */
6066         DRM_DEBUG_DRIVER("ELD size %d\n", len);
6067         for (i = 0; i < len; i++)
6068                 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
6069
6070         i = I915_READ(aud_cntrl_st2);
6071         i |= eldv;
6072         I915_WRITE(aud_cntrl_st2, i);
6073
6074 }
6075
6076 static void ironlake_write_eld(struct drm_connector *connector,
6077                                      struct drm_crtc *crtc)
6078 {
6079         struct drm_i915_private *dev_priv = connector->dev->dev_private;
6080         uint8_t *eld = connector->eld;
6081         uint32_t eldv;
6082         uint32_t i;
6083         int len;
6084         int hdmiw_hdmiedid;
6085         int aud_config;
6086         int aud_cntl_st;
6087         int aud_cntrl_st2;
6088         int pipe = to_intel_crtc(crtc)->pipe;
6089
6090         if (HAS_PCH_IBX(connector->dev)) {
6091                 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
6092                 aud_config = IBX_AUD_CFG(pipe);
6093                 aud_cntl_st = IBX_AUD_CNTL_ST(pipe);
6094                 aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
6095         } else {
6096                 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe);
6097                 aud_config = CPT_AUD_CFG(pipe);
6098                 aud_cntl_st = CPT_AUD_CNTL_ST(pipe);
6099                 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
6100         }
6101
6102         DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
6103
6104         i = I915_READ(aud_cntl_st);
6105         i = (i >> 29) & DIP_PORT_SEL_MASK;              /* DIP_Port_Select, 0x1 = PortB */
6106         if (!i) {
6107                 DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
6108                 /* operate blindly on all ports */
6109                 eldv = IBX_ELD_VALIDB;
6110                 eldv |= IBX_ELD_VALIDB << 4;
6111                 eldv |= IBX_ELD_VALIDB << 8;
6112         } else {
6113                 DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
6114                 eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
6115         }
6116
6117         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
6118                 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
6119                 eld[5] |= (1 << 2);     /* Conn_Type, 0x1 = DisplayPort */
6120                 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
6121         } else
6122                 I915_WRITE(aud_config, 0);
6123
6124         if (intel_eld_uptodate(connector,
6125                                aud_cntrl_st2, eldv,
6126                                aud_cntl_st, IBX_ELD_ADDRESS,
6127                                hdmiw_hdmiedid))
6128                 return;
6129
6130         i = I915_READ(aud_cntrl_st2);
6131         i &= ~eldv;
6132         I915_WRITE(aud_cntrl_st2, i);
6133
6134         if (!eld[0])
6135                 return;
6136
6137         i = I915_READ(aud_cntl_st);
6138         i &= ~IBX_ELD_ADDRESS;
6139         I915_WRITE(aud_cntl_st, i);
6140
6141         len = min_t(uint8_t, eld[2], 21);       /* 84 bytes of hw ELD buffer */
6142         DRM_DEBUG_DRIVER("ELD size %d\n", len);
6143         for (i = 0; i < len; i++)
6144                 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
6145
6146         i = I915_READ(aud_cntrl_st2);
6147         i |= eldv;
6148         I915_WRITE(aud_cntrl_st2, i);
6149 }
6150
6151 void intel_write_eld(struct drm_encoder *encoder,
6152                      struct drm_display_mode *mode)
6153 {
6154         struct drm_crtc *crtc = encoder->crtc;
6155         struct drm_connector *connector;
6156         struct drm_device *dev = encoder->dev;
6157         struct drm_i915_private *dev_priv = dev->dev_private;
6158
6159         connector = drm_select_eld(encoder, mode);
6160         if (!connector)
6161                 return;
6162
6163         DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6164                          connector->base.id,
6165                          drm_get_connector_name(connector),
6166                          connector->encoder->base.id,
6167                          drm_get_encoder_name(connector->encoder));
6168
6169         connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
6170
6171         if (dev_priv->display.write_eld)
6172                 dev_priv->display.write_eld(connector, crtc);
6173 }
6174
6175 /** Loads the palette/gamma unit for the CRTC with the prepared values */
6176 void intel_crtc_load_lut(struct drm_crtc *crtc)
6177 {
6178         struct drm_device *dev = crtc->dev;
6179         struct drm_i915_private *dev_priv = dev->dev_private;
6180         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6181         int palreg = PALETTE(intel_crtc->pipe);
6182         int i;
6183
6184         /* The clocks have to be on to load the palette. */
6185         if (!crtc->enabled || !intel_crtc->active)
6186                 return;
6187
6188         /* use legacy palette for Ironlake */
6189         if (HAS_PCH_SPLIT(dev))
6190                 palreg = LGC_PALETTE(intel_crtc->pipe);
6191
6192         for (i = 0; i < 256; i++) {
6193                 I915_WRITE(palreg + 4 * i,
6194                            (intel_crtc->lut_r[i] << 16) |
6195                            (intel_crtc->lut_g[i] << 8) |
6196                            intel_crtc->lut_b[i]);
6197         }
6198 }
6199
6200 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
6201 {
6202         struct drm_device *dev = crtc->dev;
6203         struct drm_i915_private *dev_priv = dev->dev_private;
6204         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6205         bool visible = base != 0;
6206         u32 cntl;
6207
6208         if (intel_crtc->cursor_visible == visible)
6209                 return;
6210
6211         cntl = I915_READ(_CURACNTR);
6212         if (visible) {
6213                 /* On these chipsets we can only modify the base whilst
6214                  * the cursor is disabled.
6215                  */
6216                 I915_WRITE(_CURABASE, base);
6217
6218                 cntl &= ~(CURSOR_FORMAT_MASK);
6219                 /* XXX width must be 64, stride 256 => 0x00 << 28 */
6220                 cntl |= CURSOR_ENABLE |
6221                         CURSOR_GAMMA_ENABLE |
6222                         CURSOR_FORMAT_ARGB;
6223         } else
6224                 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
6225         I915_WRITE(_CURACNTR, cntl);
6226
6227         intel_crtc->cursor_visible = visible;
6228 }
6229
6230 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
6231 {
6232         struct drm_device *dev = crtc->dev;
6233         struct drm_i915_private *dev_priv = dev->dev_private;
6234         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6235         int pipe = intel_crtc->pipe;
6236         bool visible = base != 0;
6237
6238         if (intel_crtc->cursor_visible != visible) {
6239                 uint32_t cntl = I915_READ(CURCNTR(pipe));
6240                 if (base) {
6241                         cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
6242                         cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
6243                         cntl |= pipe << 28; /* Connect to correct pipe */
6244                 } else {
6245                         cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
6246                         cntl |= CURSOR_MODE_DISABLE;
6247                 }
6248                 I915_WRITE(CURCNTR(pipe), cntl);
6249
6250                 intel_crtc->cursor_visible = visible;
6251         }
6252         /* and commit changes on next vblank */
6253         I915_WRITE(CURBASE(pipe), base);
6254 }
6255
6256 static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
6257 {
6258         struct drm_device *dev = crtc->dev;
6259         struct drm_i915_private *dev_priv = dev->dev_private;
6260         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6261         int pipe = intel_crtc->pipe;
6262         bool visible = base != 0;
6263
6264         if (intel_crtc->cursor_visible != visible) {
6265                 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
6266                 if (base) {
6267                         cntl &= ~CURSOR_MODE;
6268                         cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
6269                 } else {
6270                         cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
6271                         cntl |= CURSOR_MODE_DISABLE;
6272                 }
6273                 if (IS_HASWELL(dev))
6274                         cntl |= CURSOR_PIPE_CSC_ENABLE;
6275                 I915_WRITE(CURCNTR_IVB(pipe), cntl);
6276
6277                 intel_crtc->cursor_visible = visible;
6278         }
6279         /* and commit changes on next vblank */
6280         I915_WRITE(CURBASE_IVB(pipe), base);
6281 }
6282
6283 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
6284 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
6285                                      bool on)
6286 {
6287         struct drm_device *dev = crtc->dev;
6288         struct drm_i915_private *dev_priv = dev->dev_private;
6289         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6290         int pipe = intel_crtc->pipe;
6291         int x = intel_crtc->cursor_x;
6292         int y = intel_crtc->cursor_y;
6293         u32 base, pos;
6294         bool visible;
6295
6296         pos = 0;
6297
6298         if (on && crtc->enabled && crtc->fb) {
6299                 base = intel_crtc->cursor_addr;
6300                 if (x > (int) crtc->fb->width)
6301                         base = 0;
6302
6303                 if (y > (int) crtc->fb->height)
6304                         base = 0;
6305         } else
6306                 base = 0;
6307
6308         if (x < 0) {
6309                 if (x + intel_crtc->cursor_width < 0)
6310                         base = 0;
6311
6312                 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
6313                 x = -x;
6314         }
6315         pos |= x << CURSOR_X_SHIFT;
6316
6317         if (y < 0) {
6318                 if (y + intel_crtc->cursor_height < 0)
6319                         base = 0;
6320
6321                 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
6322                 y = -y;
6323         }
6324         pos |= y << CURSOR_Y_SHIFT;
6325
6326         visible = base != 0;
6327         if (!visible && !intel_crtc->cursor_visible)
6328                 return;
6329
6330         if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
6331                 I915_WRITE(CURPOS_IVB(pipe), pos);
6332                 ivb_update_cursor(crtc, base);
6333         } else {
6334                 I915_WRITE(CURPOS(pipe), pos);
6335                 if (IS_845G(dev) || IS_I865G(dev))
6336                         i845_update_cursor(crtc, base);
6337                 else
6338                         i9xx_update_cursor(crtc, base);
6339         }
6340 }
6341
6342 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
6343                                  struct drm_file *file,
6344                                  uint32_t handle,
6345                                  uint32_t width, uint32_t height)
6346 {
6347         struct drm_device *dev = crtc->dev;
6348         struct drm_i915_private *dev_priv = dev->dev_private;
6349         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6350         struct drm_i915_gem_object *obj;
6351         uint32_t addr;
6352         int ret;
6353
6354         /* if we want to turn off the cursor ignore width and height */
6355         if (!handle) {
6356                 DRM_DEBUG_KMS("cursor off\n");
6357                 addr = 0;
6358                 obj = NULL;
6359                 mutex_lock(&dev->struct_mutex);
6360                 goto finish;
6361         }
6362
6363         /* Currently we only support 64x64 cursors */
6364         if (width != 64 || height != 64) {
6365                 DRM_ERROR("we currently only support 64x64 cursors\n");
6366                 return -EINVAL;
6367         }
6368
6369         obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
6370         if (&obj->base == NULL)
6371                 return -ENOENT;
6372
6373         if (obj->base.size < width * height * 4) {
6374                 DRM_ERROR("buffer is to small\n");
6375                 ret = -ENOMEM;
6376                 goto fail;
6377         }
6378
6379         /* we only need to pin inside GTT if cursor is non-phy */
6380         mutex_lock(&dev->struct_mutex);
6381         if (!dev_priv->info->cursor_needs_physical) {
6382                 unsigned alignment;
6383
6384                 if (obj->tiling_mode) {
6385                         DRM_ERROR("cursor cannot be tiled\n");
6386                         ret = -EINVAL;
6387                         goto fail_locked;
6388                 }
6389
6390                 /* Note that the w/a also requires 2 PTE of padding following
6391                  * the bo. We currently fill all unused PTE with the shadow
6392                  * page and so we should always have valid PTE following the
6393                  * cursor preventing the VT-d warning.
6394                  */
6395                 alignment = 0;
6396                 if (need_vtd_wa(dev))
6397                         alignment = 64*1024;
6398
6399                 ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
6400                 if (ret) {
6401                         DRM_ERROR("failed to move cursor bo into the GTT\n");
6402                         goto fail_locked;
6403                 }
6404
6405                 ret = i915_gem_object_put_fence(obj);
6406                 if (ret) {
6407                         DRM_ERROR("failed to release fence for cursor");
6408                         goto fail_unpin;
6409                 }
6410
6411                 addr = obj->gtt_offset;
6412         } else {
6413                 int align = IS_I830(dev) ? 16 * 1024 : 256;
6414                 ret = i915_gem_attach_phys_object(dev, obj,
6415                                                   (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
6416                                                   align);
6417                 if (ret) {
6418                         DRM_ERROR("failed to attach phys object\n");
6419                         goto fail_locked;
6420                 }
6421                 addr = obj->phys_obj->handle->busaddr;
6422         }
6423
6424         if (IS_GEN2(dev))
6425                 I915_WRITE(CURSIZE, (height << 12) | width);
6426
6427  finish:
6428         if (intel_crtc->cursor_bo) {
6429                 if (dev_priv->info->cursor_needs_physical) {
6430                         if (intel_crtc->cursor_bo != obj)
6431                                 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
6432                 } else
6433                         i915_gem_object_unpin(intel_crtc->cursor_bo);
6434                 drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
6435         }
6436
6437         mutex_unlock(&dev->struct_mutex);
6438
6439         intel_crtc->cursor_addr = addr;
6440         intel_crtc->cursor_bo = obj;
6441         intel_crtc->cursor_width = width;
6442         intel_crtc->cursor_height = height;
6443
6444         intel_crtc_update_cursor(crtc, true);
6445
6446         return 0;
6447 fail_unpin:
6448         i915_gem_object_unpin(obj);
6449 fail_locked:
6450         mutex_unlock(&dev->struct_mutex);
6451 fail:
6452         drm_gem_object_unreference_unlocked(&obj->base);
6453         return ret;
6454 }
6455
6456 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
6457 {
6458         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6459
6460         intel_crtc->cursor_x = x;
6461         intel_crtc->cursor_y = y;
6462
6463         intel_crtc_update_cursor(crtc, true);
6464
6465         return 0;
6466 }
6467
6468 /** Sets the color ramps on behalf of RandR */
6469 void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
6470                                  u16 blue, int regno)
6471 {
6472         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6473
6474         intel_crtc->lut_r[regno] = red >> 8;
6475         intel_crtc->lut_g[regno] = green >> 8;
6476         intel_crtc->lut_b[regno] = blue >> 8;
6477 }
6478
6479 void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
6480                              u16 *blue, int regno)
6481 {
6482         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6483
6484         *red = intel_crtc->lut_r[regno] << 8;
6485         *green = intel_crtc->lut_g[regno] << 8;
6486         *blue = intel_crtc->lut_b[regno] << 8;
6487 }
6488
6489 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
6490                                  u16 *blue, uint32_t start, uint32_t size)
6491 {
6492         int end = (start + size > 256) ? 256 : start + size, i;
6493         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6494
6495         for (i = start; i < end; i++) {
6496                 intel_crtc->lut_r[i] = red[i] >> 8;
6497                 intel_crtc->lut_g[i] = green[i] >> 8;
6498                 intel_crtc->lut_b[i] = blue[i] >> 8;
6499         }
6500
6501         intel_crtc_load_lut(crtc);
6502 }
6503
6504 /* VESA 640x480x72Hz mode to set on the pipe */
6505 static struct drm_display_mode load_detect_mode = {
6506         DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
6507                  704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
6508 };
6509
6510 static struct drm_framebuffer *
6511 intel_framebuffer_create(struct drm_device *dev,
6512                          struct drm_mode_fb_cmd2 *mode_cmd,
6513                          struct drm_i915_gem_object *obj)
6514 {
6515         struct intel_framebuffer *intel_fb;
6516         int ret;
6517
6518         intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
6519         if (!intel_fb) {
6520                 drm_gem_object_unreference_unlocked(&obj->base);
6521                 return ERR_PTR(-ENOMEM);
6522         }
6523
6524         ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
6525         if (ret) {
6526                 drm_gem_object_unreference_unlocked(&obj->base);
6527                 kfree(intel_fb);
6528                 return ERR_PTR(ret);
6529         }
6530
6531         return &intel_fb->base;
6532 }
6533
6534 static u32
6535 intel_framebuffer_pitch_for_width(int width, int bpp)
6536 {
6537         u32 pitch = DIV_ROUND_UP(width * bpp, 8);
6538         return ALIGN(pitch, 64);
6539 }
6540
6541 static u32
6542 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
6543 {
6544         u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
6545         return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
6546 }
6547
6548 static struct drm_framebuffer *
6549 intel_framebuffer_create_for_mode(struct drm_device *dev,
6550                                   struct drm_display_mode *mode,
6551                                   int depth, int bpp)
6552 {
6553         struct drm_i915_gem_object *obj;
6554         struct drm_mode_fb_cmd2 mode_cmd = { 0 };
6555
6556         obj = i915_gem_alloc_object(dev,
6557                                     intel_framebuffer_size_for_mode(mode, bpp));
6558         if (obj == NULL)
6559                 return ERR_PTR(-ENOMEM);
6560
6561         mode_cmd.width = mode->hdisplay;
6562         mode_cmd.height = mode->vdisplay;
6563         mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
6564                                                                 bpp);
6565         mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
6566
6567         return intel_framebuffer_create(dev, &mode_cmd, obj);
6568 }
6569
6570 static struct drm_framebuffer *
6571 mode_fits_in_fbdev(struct drm_device *dev,
6572                    struct drm_display_mode *mode)
6573 {
6574         struct drm_i915_private *dev_priv = dev->dev_private;
6575         struct drm_i915_gem_object *obj;
6576         struct drm_framebuffer *fb;
6577
6578         if (dev_priv->fbdev == NULL)
6579                 return NULL;
6580
6581         obj = dev_priv->fbdev->ifb.obj;
6582         if (obj == NULL)
6583                 return NULL;
6584
6585         fb = &dev_priv->fbdev->ifb.base;
6586         if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
6587                                                                fb->bits_per_pixel))
6588                 return NULL;
6589
6590         if (obj->base.size < mode->vdisplay * fb->pitches[0])
6591                 return NULL;
6592
6593         return fb;
6594 }
6595
6596 bool intel_get_load_detect_pipe(struct drm_connector *connector,
6597                                 struct drm_display_mode *mode,
6598                                 struct intel_load_detect_pipe *old)
6599 {
6600         struct intel_crtc *intel_crtc;
6601         struct intel_encoder *intel_encoder =
6602                 intel_attached_encoder(connector);
6603         struct drm_crtc *possible_crtc;
6604         struct drm_encoder *encoder = &intel_encoder->base;
6605         struct drm_crtc *crtc = NULL;
6606         struct drm_device *dev = encoder->dev;
6607         struct drm_framebuffer *fb;
6608         int i = -1;
6609
6610         DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6611                       connector->base.id, drm_get_connector_name(connector),
6612                       encoder->base.id, drm_get_encoder_name(encoder));
6613
6614         /*
6615          * Algorithm gets a little messy:
6616          *
6617          *   - if the connector already has an assigned crtc, use it (but make
6618          *     sure it's on first)
6619          *
6620          *   - try to find the first unused crtc that can drive this connector,
6621          *     and use that if we find one
6622          */
6623
6624         /* See if we already have a CRTC for this connector */
6625         if (encoder->crtc) {
6626                 crtc = encoder->crtc;
6627
6628                 mutex_lock(&crtc->mutex);
6629
6630                 old->dpms_mode = connector->dpms;
6631                 old->load_detect_temp = false;
6632
6633                 /* Make sure the crtc and connector are running */
6634                 if (connector->dpms != DRM_MODE_DPMS_ON)
6635                         connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
6636
6637                 return true;
6638         }
6639
6640         /* Find an unused one (if possible) */
6641         list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
6642                 i++;
6643                 if (!(encoder->possible_crtcs & (1 << i)))
6644                         continue;
6645                 if (!possible_crtc->enabled) {
6646                         crtc = possible_crtc;
6647                         break;
6648                 }
6649         }
6650
6651         /*
6652          * If we didn't find an unused CRTC, don't use any.
6653          */
6654         if (!crtc) {
6655                 DRM_DEBUG_KMS("no pipe available for load-detect\n");
6656                 return false;
6657         }
6658
6659         mutex_lock(&crtc->mutex);
6660         intel_encoder->new_crtc = to_intel_crtc(crtc);
6661         to_intel_connector(connector)->new_encoder = intel_encoder;
6662
6663         intel_crtc = to_intel_crtc(crtc);
6664         old->dpms_mode = connector->dpms;
6665         old->load_detect_temp = true;
6666         old->release_fb = NULL;
6667
6668         if (!mode)
6669                 mode = &load_detect_mode;
6670
6671         /* We need a framebuffer large enough to accommodate all accesses
6672          * that the plane may generate whilst we perform load detection.
6673          * We can not rely on the fbcon either being present (we get called
6674          * during its initialisation to detect all boot displays, or it may
6675          * not even exist) or that it is large enough to satisfy the
6676          * requested mode.
6677          */
6678         fb = mode_fits_in_fbdev(dev, mode);
6679         if (fb == NULL) {
6680                 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
6681                 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
6682                 old->release_fb = fb;
6683         } else
6684                 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
6685         if (IS_ERR(fb)) {
6686                 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
6687                 mutex_unlock(&crtc->mutex);
6688                 return false;
6689         }
6690
6691         if (intel_set_mode(crtc, mode, 0, 0, fb)) {
6692                 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
6693                 if (old->release_fb)
6694                         old->release_fb->funcs->destroy(old->release_fb);
6695                 mutex_unlock(&crtc->mutex);
6696                 return false;
6697         }
6698
6699         /* let the connector get through one full cycle before testing */
6700         intel_wait_for_vblank(dev, intel_crtc->pipe);
6701         return true;
6702 }
6703
6704 void intel_release_load_detect_pipe(struct drm_connector *connector,
6705                                     struct intel_load_detect_pipe *old)
6706 {
6707         struct intel_encoder *intel_encoder =
6708                 intel_attached_encoder(connector);
6709         struct drm_encoder *encoder = &intel_encoder->base;
6710         struct drm_crtc *crtc = encoder->crtc;
6711
6712         DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6713                       connector->base.id, drm_get_connector_name(connector),
6714                       encoder->base.id, drm_get_encoder_name(encoder));
6715
6716         if (old->load_detect_temp) {
6717                 to_intel_connector(connector)->new_encoder = NULL;
6718                 intel_encoder->new_crtc = NULL;
6719                 intel_set_mode(crtc, NULL, 0, 0, NULL);
6720
6721                 if (old->release_fb) {
6722                         drm_framebuffer_unregister_private(old->release_fb);
6723                         drm_framebuffer_unreference(old->release_fb);
6724                 }
6725
6726                 mutex_unlock(&crtc->mutex);
6727                 return;
6728         }
6729
6730         /* Switch crtc and encoder back off if necessary */
6731         if (old->dpms_mode != DRM_MODE_DPMS_ON)
6732                 connector->funcs->dpms(connector, old->dpms_mode);
6733
6734         mutex_unlock(&crtc->mutex);
6735 }
6736
6737 /* Returns the clock of the currently programmed mode of the given pipe. */
6738 static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
6739 {
6740         struct drm_i915_private *dev_priv = dev->dev_private;
6741         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6742         int pipe = intel_crtc->pipe;
6743         u32 dpll = I915_READ(DPLL(pipe));
6744         u32 fp;
6745         intel_clock_t clock;
6746
6747         if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
6748                 fp = I915_READ(FP0(pipe));
6749         else
6750                 fp = I915_READ(FP1(pipe));
6751
6752         clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
6753         if (IS_PINEVIEW(dev)) {
6754                 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
6755                 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
6756         } else {
6757                 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
6758                 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
6759         }
6760
6761         if (!IS_GEN2(dev)) {
6762                 if (IS_PINEVIEW(dev))
6763                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
6764                                 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
6765                 else
6766                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
6767                                DPLL_FPA01_P1_POST_DIV_SHIFT);
6768
6769                 switch (dpll & DPLL_MODE_MASK) {
6770                 case DPLLB_MODE_DAC_SERIAL:
6771                         clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
6772                                 5 : 10;
6773                         break;
6774                 case DPLLB_MODE_LVDS:
6775                         clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
6776                                 7 : 14;
6777                         break;
6778                 default:
6779                         DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
6780                                   "mode\n", (int)(dpll & DPLL_MODE_MASK));
6781                         return 0;
6782                 }
6783
6784                 /* XXX: Handle the 100Mhz refclk */
6785                 intel_clock(dev, 96000, &clock);
6786         } else {
6787                 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
6788
6789                 if (is_lvds) {
6790                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
6791                                        DPLL_FPA01_P1_POST_DIV_SHIFT);
6792                         clock.p2 = 14;
6793
6794                         if ((dpll & PLL_REF_INPUT_MASK) ==
6795                             PLLB_REF_INPUT_SPREADSPECTRUMIN) {
6796                                 /* XXX: might not be 66MHz */
6797                                 intel_clock(dev, 66000, &clock);
6798                         } else
6799                                 intel_clock(dev, 48000, &clock);
6800                 } else {
6801                         if (dpll & PLL_P1_DIVIDE_BY_TWO)
6802                                 clock.p1 = 2;
6803                         else {
6804                                 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
6805                                             DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
6806                         }
6807                         if (dpll & PLL_P2_DIVIDE_BY_4)
6808                                 clock.p2 = 4;
6809                         else
6810                                 clock.p2 = 2;
6811
6812                         intel_clock(dev, 48000, &clock);
6813                 }
6814         }
6815
6816         /* XXX: It would be nice to validate the clocks, but we can't reuse
6817          * i830PllIsValid() because it relies on the xf86_config connector
6818          * configuration being accurate, which it isn't necessarily.
6819          */
6820
6821         return clock.dot;
6822 }
6823
6824 /** Returns the currently programmed mode of the given pipe. */
6825 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
6826                                              struct drm_crtc *crtc)
6827 {
6828         struct drm_i915_private *dev_priv = dev->dev_private;
6829         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6830         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
6831         struct drm_display_mode *mode;
6832         int htot = I915_READ(HTOTAL(cpu_transcoder));
6833         int hsync = I915_READ(HSYNC(cpu_transcoder));
6834         int vtot = I915_READ(VTOTAL(cpu_transcoder));
6835         int vsync = I915_READ(VSYNC(cpu_transcoder));
6836
6837         mode = kzalloc(sizeof(*mode), GFP_KERNEL);
6838         if (!mode)
6839                 return NULL;
6840
6841         mode->clock = intel_crtc_clock_get(dev, crtc);
6842         mode->hdisplay = (htot & 0xffff) + 1;
6843         mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
6844         mode->hsync_start = (hsync & 0xffff) + 1;
6845         mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
6846         mode->vdisplay = (vtot & 0xffff) + 1;
6847         mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
6848         mode->vsync_start = (vsync & 0xffff) + 1;
6849         mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
6850
6851         drm_mode_set_name(mode);
6852
6853         return mode;
6854 }
6855
6856 static void intel_increase_pllclock(struct drm_crtc *crtc)
6857 {
6858         struct drm_device *dev = crtc->dev;
6859         drm_i915_private_t *dev_priv = dev->dev_private;
6860         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6861         int pipe = intel_crtc->pipe;
6862         int dpll_reg = DPLL(pipe);
6863         int dpll;
6864
6865         if (HAS_PCH_SPLIT(dev))
6866                 return;
6867
6868         if (!dev_priv->lvds_downclock_avail)
6869                 return;
6870
6871         dpll = I915_READ(dpll_reg);
6872         if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
6873                 DRM_DEBUG_DRIVER("upclocking LVDS\n");
6874
6875                 assert_panel_unlocked(dev_priv, pipe);
6876
6877                 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
6878                 I915_WRITE(dpll_reg, dpll);
6879                 intel_wait_for_vblank(dev, pipe);
6880
6881                 dpll = I915_READ(dpll_reg);
6882                 if (dpll & DISPLAY_RATE_SELECT_FPA1)
6883                         DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
6884         }
6885 }
6886
6887 static void intel_decrease_pllclock(struct drm_crtc *crtc)
6888 {
6889         struct drm_device *dev = crtc->dev;
6890         drm_i915_private_t *dev_priv = dev->dev_private;
6891         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6892
6893         if (HAS_PCH_SPLIT(dev))
6894                 return;
6895
6896         if (!dev_priv->lvds_downclock_avail)
6897                 return;
6898
6899         /*
6900          * Since this is called by a timer, we should never get here in
6901          * the manual case.
6902          */
6903         if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
6904                 int pipe = intel_crtc->pipe;
6905                 int dpll_reg = DPLL(pipe);
6906                 int dpll;
6907
6908                 DRM_DEBUG_DRIVER("downclocking LVDS\n");
6909
6910                 assert_panel_unlocked(dev_priv, pipe);
6911
6912                 dpll = I915_READ(dpll_reg);
6913                 dpll |= DISPLAY_RATE_SELECT_FPA1;
6914                 I915_WRITE(dpll_reg, dpll);
6915                 intel_wait_for_vblank(dev, pipe);
6916                 dpll = I915_READ(dpll_reg);
6917                 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
6918                         DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
6919         }
6920
6921 }
6922
6923 void intel_mark_busy(struct drm_device *dev)
6924 {
6925         i915_update_gfx_val(dev->dev_private);
6926 }
6927
6928 void intel_mark_idle(struct drm_device *dev)
6929 {
6930         struct drm_crtc *crtc;
6931
6932         if (!i915_powersave)
6933                 return;
6934
6935         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
6936                 if (!crtc->fb)
6937                         continue;
6938
6939                 intel_decrease_pllclock(crtc);
6940         }
6941 }
6942
6943 void intel_mark_fb_busy(struct drm_i915_gem_object *obj)
6944 {
6945         struct drm_device *dev = obj->base.dev;
6946         struct drm_crtc *crtc;
6947
6948         if (!i915_powersave)
6949                 return;
6950
6951         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
6952                 if (!crtc->fb)
6953                         continue;
6954
6955                 if (to_intel_framebuffer(crtc->fb)->obj == obj)
6956                         intel_increase_pllclock(crtc);
6957         }
6958 }
6959
6960 static void intel_crtc_destroy(struct drm_crtc *crtc)
6961 {
6962         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6963         struct drm_device *dev = crtc->dev;
6964         struct intel_unpin_work *work;
6965         unsigned long flags;
6966
6967         spin_lock_irqsave(&dev->event_lock, flags);
6968         work = intel_crtc->unpin_work;
6969         intel_crtc->unpin_work = NULL;
6970         spin_unlock_irqrestore(&dev->event_lock, flags);
6971
6972         if (work) {
6973                 cancel_work_sync(&work->work);
6974                 kfree(work);
6975         }
6976
6977         drm_crtc_cleanup(crtc);
6978
6979         kfree(intel_crtc);
6980 }
6981
6982 static void intel_unpin_work_fn(struct work_struct *__work)
6983 {
6984         struct intel_unpin_work *work =
6985                 container_of(__work, struct intel_unpin_work, work);
6986         struct drm_device *dev = work->crtc->dev;
6987
6988         mutex_lock(&dev->struct_mutex);
6989         intel_unpin_fb_obj(work->old_fb_obj);
6990         drm_gem_object_unreference(&work->pending_flip_obj->base);
6991         drm_gem_object_unreference(&work->old_fb_obj->base);
6992
6993         intel_update_fbc(dev);
6994         mutex_unlock(&dev->struct_mutex);
6995
6996         BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
6997         atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
6998
6999         kfree(work);
7000 }
7001
7002 static void do_intel_finish_page_flip(struct drm_device *dev,
7003                                       struct drm_crtc *crtc)
7004 {
7005         drm_i915_private_t *dev_priv = dev->dev_private;
7006         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7007         struct intel_unpin_work *work;
7008         unsigned long flags;
7009
7010         /* Ignore early vblank irqs */
7011         if (intel_crtc == NULL)
7012                 return;
7013
7014         spin_lock_irqsave(&dev->event_lock, flags);
7015         work = intel_crtc->unpin_work;
7016
7017         /* Ensure we don't miss a work->pending update ... */
7018         smp_rmb();
7019
7020         if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
7021                 spin_unlock_irqrestore(&dev->event_lock, flags);
7022                 return;
7023         }
7024
7025         /* and that the unpin work is consistent wrt ->pending. */
7026         smp_rmb();
7027
7028         intel_crtc->unpin_work = NULL;
7029
7030         if (work->event)
7031                 drm_send_vblank_event(dev, intel_crtc->pipe, work->event);
7032
7033         drm_vblank_put(dev, intel_crtc->pipe);
7034
7035         spin_unlock_irqrestore(&dev->event_lock, flags);
7036
7037         wake_up_all(&dev_priv->pending_flip_queue);
7038
7039         queue_work(dev_priv->wq, &work->work);
7040
7041         trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
7042 }
7043
7044 void intel_finish_page_flip(struct drm_device *dev, int pipe)
7045 {
7046         drm_i915_private_t *dev_priv = dev->dev_private;
7047         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
7048
7049         do_intel_finish_page_flip(dev, crtc);
7050 }
7051
7052 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
7053 {
7054         drm_i915_private_t *dev_priv = dev->dev_private;
7055         struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
7056
7057         do_intel_finish_page_flip(dev, crtc);
7058 }
7059
7060 void intel_prepare_page_flip(struct drm_device *dev, int plane)
7061 {
7062         drm_i915_private_t *dev_priv = dev->dev_private;
7063         struct intel_crtc *intel_crtc =
7064                 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
7065         unsigned long flags;
7066
7067         /* NB: An MMIO update of the plane base pointer will also
7068          * generate a page-flip completion irq, i.e. every modeset
7069          * is also accompanied by a spurious intel_prepare_page_flip().
7070          */
7071         spin_lock_irqsave(&dev->event_lock, flags);
7072         if (intel_crtc->unpin_work)
7073                 atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
7074         spin_unlock_irqrestore(&dev->event_lock, flags);
7075 }
7076
7077 inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
7078 {
7079         /* Ensure that the work item is consistent when activating it ... */
7080         smp_wmb();
7081         atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
7082         /* and that it is marked active as soon as the irq could fire. */
7083         smp_wmb();
7084 }
7085
7086 static int intel_gen2_queue_flip(struct drm_device *dev,
7087                                  struct drm_crtc *crtc,
7088                                  struct drm_framebuffer *fb,
7089                                  struct drm_i915_gem_object *obj)
7090 {
7091         struct drm_i915_private *dev_priv = dev->dev_private;
7092         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7093         u32 flip_mask;
7094         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7095         int ret;
7096
7097         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7098         if (ret)
7099                 goto err;
7100
7101         ret = intel_ring_begin(ring, 6);
7102         if (ret)
7103                 goto err_unpin;
7104
7105         /* Can't queue multiple flips, so wait for the previous
7106          * one to finish before executing the next.
7107          */
7108         if (intel_crtc->plane)
7109                 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
7110         else
7111                 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
7112         intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
7113         intel_ring_emit(ring, MI_NOOP);
7114         intel_ring_emit(ring, MI_DISPLAY_FLIP |
7115                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7116         intel_ring_emit(ring, fb->pitches[0]);
7117         intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7118         intel_ring_emit(ring, 0); /* aux display base address, unused */
7119
7120         intel_mark_page_flip_active(intel_crtc);
7121         intel_ring_advance(ring);
7122         return 0;
7123
7124 err_unpin:
7125         intel_unpin_fb_obj(obj);
7126 err:
7127         return ret;
7128 }
7129
7130 static int intel_gen3_queue_flip(struct drm_device *dev,
7131                                  struct drm_crtc *crtc,
7132                                  struct drm_framebuffer *fb,
7133                                  struct drm_i915_gem_object *obj)
7134 {
7135         struct drm_i915_private *dev_priv = dev->dev_private;
7136         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7137         u32 flip_mask;
7138         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7139         int ret;
7140
7141         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7142         if (ret)
7143                 goto err;
7144
7145         ret = intel_ring_begin(ring, 6);
7146         if (ret)
7147                 goto err_unpin;
7148
7149         if (intel_crtc->plane)
7150                 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
7151         else
7152                 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
7153         intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
7154         intel_ring_emit(ring, MI_NOOP);
7155         intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
7156                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7157         intel_ring_emit(ring, fb->pitches[0]);
7158         intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7159         intel_ring_emit(ring, MI_NOOP);
7160
7161         intel_mark_page_flip_active(intel_crtc);
7162         intel_ring_advance(ring);
7163         return 0;
7164
7165 err_unpin:
7166         intel_unpin_fb_obj(obj);
7167 err:
7168         return ret;
7169 }
7170
7171 static int intel_gen4_queue_flip(struct drm_device *dev,
7172                                  struct drm_crtc *crtc,
7173                                  struct drm_framebuffer *fb,
7174                                  struct drm_i915_gem_object *obj)
7175 {
7176         struct drm_i915_private *dev_priv = dev->dev_private;
7177         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7178         uint32_t pf, pipesrc;
7179         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7180         int ret;
7181
7182         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7183         if (ret)
7184                 goto err;
7185
7186         ret = intel_ring_begin(ring, 4);
7187         if (ret)
7188                 goto err_unpin;
7189
7190         /* i965+ uses the linear or tiled offsets from the
7191          * Display Registers (which do not change across a page-flip)
7192          * so we need only reprogram the base address.
7193          */
7194         intel_ring_emit(ring, MI_DISPLAY_FLIP |
7195                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7196         intel_ring_emit(ring, fb->pitches[0]);
7197         intel_ring_emit(ring,
7198                         (obj->gtt_offset + intel_crtc->dspaddr_offset) |
7199                         obj->tiling_mode);
7200
7201         /* XXX Enabling the panel-fitter across page-flip is so far
7202          * untested on non-native modes, so ignore it for now.
7203          * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
7204          */
7205         pf = 0;
7206         pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
7207         intel_ring_emit(ring, pf | pipesrc);
7208
7209         intel_mark_page_flip_active(intel_crtc);
7210         intel_ring_advance(ring);
7211         return 0;
7212
7213 err_unpin:
7214         intel_unpin_fb_obj(obj);
7215 err:
7216         return ret;
7217 }
7218
7219 static int intel_gen6_queue_flip(struct drm_device *dev,
7220                                  struct drm_crtc *crtc,
7221                                  struct drm_framebuffer *fb,
7222                                  struct drm_i915_gem_object *obj)
7223 {
7224         struct drm_i915_private *dev_priv = dev->dev_private;
7225         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7226         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7227         uint32_t pf, pipesrc;
7228         int ret;
7229
7230         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7231         if (ret)
7232                 goto err;
7233
7234         ret = intel_ring_begin(ring, 4);
7235         if (ret)
7236                 goto err_unpin;
7237
7238         intel_ring_emit(ring, MI_DISPLAY_FLIP |
7239                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7240         intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
7241         intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7242
7243         /* Contrary to the suggestions in the documentation,
7244          * "Enable Panel Fitter" does not seem to be required when page
7245          * flipping with a non-native mode, and worse causes a normal
7246          * modeset to fail.
7247          * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
7248          */
7249         pf = 0;
7250         pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
7251         intel_ring_emit(ring, pf | pipesrc);
7252
7253         intel_mark_page_flip_active(intel_crtc);
7254         intel_ring_advance(ring);
7255         return 0;
7256
7257 err_unpin:
7258         intel_unpin_fb_obj(obj);
7259 err:
7260         return ret;
7261 }
7262
7263 /*
7264  * On gen7 we currently use the blit ring because (in early silicon at least)
7265  * the render ring doesn't give us interrpts for page flip completion, which
7266  * means clients will hang after the first flip is queued.  Fortunately the
7267  * blit ring generates interrupts properly, so use it instead.
7268  */
7269 static int intel_gen7_queue_flip(struct drm_device *dev,
7270                                  struct drm_crtc *crtc,
7271                                  struct drm_framebuffer *fb,
7272                                  struct drm_i915_gem_object *obj)
7273 {
7274         struct drm_i915_private *dev_priv = dev->dev_private;
7275         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7276         struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
7277         uint32_t plane_bit = 0;
7278         int ret;
7279
7280         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7281         if (ret)
7282                 goto err;
7283
7284         switch(intel_crtc->plane) {
7285         case PLANE_A:
7286                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
7287                 break;
7288         case PLANE_B:
7289                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
7290                 break;
7291         case PLANE_C:
7292                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
7293                 break;
7294         default:
7295                 WARN_ONCE(1, "unknown plane in flip command\n");
7296                 ret = -ENODEV;
7297                 goto err_unpin;
7298         }
7299
7300         ret = intel_ring_begin(ring, 4);
7301         if (ret)
7302                 goto err_unpin;
7303
7304         intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
7305         intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
7306         intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7307         intel_ring_emit(ring, (MI_NOOP));
7308
7309         intel_mark_page_flip_active(intel_crtc);
7310         intel_ring_advance(ring);
7311         return 0;
7312
7313 err_unpin:
7314         intel_unpin_fb_obj(obj);
7315 err:
7316         return ret;
7317 }
7318
7319 static int intel_default_queue_flip(struct drm_device *dev,
7320                                     struct drm_crtc *crtc,
7321                                     struct drm_framebuffer *fb,
7322                                     struct drm_i915_gem_object *obj)
7323 {
7324         return -ENODEV;
7325 }
7326
7327 static int intel_crtc_page_flip(struct drm_crtc *crtc,
7328                                 struct drm_framebuffer *fb,
7329                                 struct drm_pending_vblank_event *event)
7330 {
7331         struct drm_device *dev = crtc->dev;
7332         struct drm_i915_private *dev_priv = dev->dev_private;
7333         struct drm_framebuffer *old_fb = crtc->fb;
7334         struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj;
7335         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7336         struct intel_unpin_work *work;
7337         unsigned long flags;
7338         int ret;
7339
7340         /* Can't change pixel format via MI display flips. */
7341         if (fb->pixel_format != crtc->fb->pixel_format)
7342                 return -EINVAL;
7343
7344         /*
7345          * TILEOFF/LINOFF registers can't be changed via MI display flips.
7346          * Note that pitch changes could also affect these register.
7347          */
7348         if (INTEL_INFO(dev)->gen > 3 &&
7349             (fb->offsets[0] != crtc->fb->offsets[0] ||
7350              fb->pitches[0] != crtc->fb->pitches[0]))
7351                 return -EINVAL;
7352
7353         work = kzalloc(sizeof *work, GFP_KERNEL);
7354         if (work == NULL)
7355                 return -ENOMEM;
7356
7357         work->event = event;
7358         work->crtc = crtc;
7359         work->old_fb_obj = to_intel_framebuffer(old_fb)->obj;
7360         INIT_WORK(&work->work, intel_unpin_work_fn);
7361
7362         ret = drm_vblank_get(dev, intel_crtc->pipe);
7363         if (ret)
7364                 goto free_work;
7365
7366         /* We borrow the event spin lock for protecting unpin_work */
7367         spin_lock_irqsave(&dev->event_lock, flags);
7368         if (intel_crtc->unpin_work) {
7369                 spin_unlock_irqrestore(&dev->event_lock, flags);
7370                 kfree(work);
7371                 drm_vblank_put(dev, intel_crtc->pipe);
7372
7373                 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
7374                 return -EBUSY;
7375         }
7376         intel_crtc->unpin_work = work;
7377         spin_unlock_irqrestore(&dev->event_lock, flags);
7378
7379         if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
7380                 flush_workqueue(dev_priv->wq);
7381
7382         ret = i915_mutex_lock_interruptible(dev);
7383         if (ret)
7384                 goto cleanup;
7385
7386         /* Reference the objects for the scheduled work. */
7387         drm_gem_object_reference(&work->old_fb_obj->base);
7388         drm_gem_object_reference(&obj->base);
7389
7390         crtc->fb = fb;
7391
7392         work->pending_flip_obj = obj;
7393
7394         work->enable_stall_check = true;
7395
7396         atomic_inc(&intel_crtc->unpin_work_count);
7397         intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
7398
7399         ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
7400         if (ret)
7401                 goto cleanup_pending;
7402
7403         intel_disable_fbc(dev);
7404         intel_mark_fb_busy(obj);
7405         mutex_unlock(&dev->struct_mutex);
7406
7407         trace_i915_flip_request(intel_crtc->plane, obj);
7408
7409         return 0;
7410
7411 cleanup_pending:
7412         atomic_dec(&intel_crtc->unpin_work_count);
7413         crtc->fb = old_fb;
7414         drm_gem_object_unreference(&work->old_fb_obj->base);
7415         drm_gem_object_unreference(&obj->base);
7416         mutex_unlock(&dev->struct_mutex);
7417
7418 cleanup:
7419         spin_lock_irqsave(&dev->event_lock, flags);
7420         intel_crtc->unpin_work = NULL;
7421         spin_unlock_irqrestore(&dev->event_lock, flags);
7422
7423         drm_vblank_put(dev, intel_crtc->pipe);
7424 free_work:
7425         kfree(work);
7426
7427         return ret;
7428 }
7429
7430 static struct drm_crtc_helper_funcs intel_helper_funcs = {
7431         .mode_set_base_atomic = intel_pipe_set_base_atomic,
7432         .load_lut = intel_crtc_load_lut,
7433 };
7434
7435 bool intel_encoder_check_is_cloned(struct intel_encoder *encoder)
7436 {
7437         struct intel_encoder *other_encoder;
7438         struct drm_crtc *crtc = &encoder->new_crtc->base;
7439
7440         if (WARN_ON(!crtc))
7441                 return false;
7442
7443         list_for_each_entry(other_encoder,
7444                             &crtc->dev->mode_config.encoder_list,
7445                             base.head) {
7446
7447                 if (&other_encoder->new_crtc->base != crtc ||
7448                     encoder == other_encoder)
7449                         continue;
7450                 else
7451                         return true;
7452         }
7453
7454         return false;
7455 }
7456
7457 static bool intel_encoder_crtc_ok(struct drm_encoder *encoder,
7458                                   struct drm_crtc *crtc)
7459 {
7460         struct drm_device *dev;
7461         struct drm_crtc *tmp;
7462         int crtc_mask = 1;
7463
7464         WARN(!crtc, "checking null crtc?\n");
7465
7466         dev = crtc->dev;
7467
7468         list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
7469                 if (tmp == crtc)
7470                         break;
7471                 crtc_mask <<= 1;
7472         }
7473
7474         if (encoder->possible_crtcs & crtc_mask)
7475                 return true;
7476         return false;
7477 }
7478
7479 /**
7480  * intel_modeset_update_staged_output_state
7481  *
7482  * Updates the staged output configuration state, e.g. after we've read out the
7483  * current hw state.
7484  */
7485 static void intel_modeset_update_staged_output_state(struct drm_device *dev)
7486 {
7487         struct intel_encoder *encoder;
7488         struct intel_connector *connector;
7489
7490         list_for_each_entry(connector, &dev->mode_config.connector_list,
7491                             base.head) {
7492                 connector->new_encoder =
7493                         to_intel_encoder(connector->base.encoder);
7494         }
7495
7496         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7497                             base.head) {
7498                 encoder->new_crtc =
7499                         to_intel_crtc(encoder->base.crtc);
7500         }
7501 }
7502
7503 /**
7504  * intel_modeset_commit_output_state
7505  *
7506  * This function copies the stage display pipe configuration to the real one.
7507  */
7508 static void intel_modeset_commit_output_state(struct drm_device *dev)
7509 {
7510         struct intel_encoder *encoder;
7511         struct intel_connector *connector;
7512
7513         list_for_each_entry(connector, &dev->mode_config.connector_list,
7514                             base.head) {
7515                 connector->base.encoder = &connector->new_encoder->base;
7516         }
7517
7518         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7519                             base.head) {
7520                 encoder->base.crtc = &encoder->new_crtc->base;
7521         }
7522 }
7523
7524 static int
7525 pipe_config_set_bpp(struct drm_crtc *crtc,
7526                     struct drm_framebuffer *fb,
7527                     struct intel_crtc_config *pipe_config)
7528 {
7529         struct drm_device *dev = crtc->dev;
7530         struct drm_connector *connector;
7531         int bpp;
7532
7533         switch (fb->pixel_format) {
7534         case DRM_FORMAT_C8:
7535                 bpp = 8*3; /* since we go through a colormap */
7536                 break;
7537         case DRM_FORMAT_XRGB1555:
7538         case DRM_FORMAT_ARGB1555:
7539                 /* checked in intel_framebuffer_init already */
7540                 if (WARN_ON(INTEL_INFO(dev)->gen > 3))
7541                         return -EINVAL;
7542         case DRM_FORMAT_RGB565:
7543                 bpp = 6*3; /* min is 18bpp */
7544                 break;
7545         case DRM_FORMAT_XBGR8888:
7546         case DRM_FORMAT_ABGR8888:
7547                 /* checked in intel_framebuffer_init already */
7548                 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
7549                         return -EINVAL;
7550         case DRM_FORMAT_XRGB8888:
7551         case DRM_FORMAT_ARGB8888:
7552                 bpp = 8*3;
7553                 break;
7554         case DRM_FORMAT_XRGB2101010:
7555         case DRM_FORMAT_ARGB2101010:
7556         case DRM_FORMAT_XBGR2101010:
7557         case DRM_FORMAT_ABGR2101010:
7558                 /* checked in intel_framebuffer_init already */
7559                 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
7560                         return -EINVAL;
7561                 bpp = 10*3;
7562                 break;
7563         /* TODO: gen4+ supports 16 bpc floating point, too. */
7564         default:
7565                 DRM_DEBUG_KMS("unsupported depth\n");
7566                 return -EINVAL;
7567         }
7568
7569         pipe_config->pipe_bpp = bpp;
7570
7571         /* Clamp display bpp to EDID value */
7572         list_for_each_entry(connector, &dev->mode_config.connector_list,
7573                             head) {
7574                 if (connector->encoder && connector->encoder->crtc != crtc)
7575                         continue;
7576
7577                 /* Don't use an invalid EDID bpc value */
7578                 if (connector->display_info.bpc &&
7579                     connector->display_info.bpc * 3 < bpp) {
7580                         DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
7581                                       bpp, connector->display_info.bpc*3);
7582                         pipe_config->pipe_bpp = connector->display_info.bpc*3;
7583                 }
7584         }
7585
7586         return bpp;
7587 }
7588
7589 static struct intel_crtc_config *
7590 intel_modeset_pipe_config(struct drm_crtc *crtc,
7591                           struct drm_framebuffer *fb,
7592                           struct drm_display_mode *mode)
7593 {
7594         struct drm_device *dev = crtc->dev;
7595         struct drm_encoder_helper_funcs *encoder_funcs;
7596         struct intel_encoder *encoder;
7597         struct intel_crtc_config *pipe_config;
7598         int plane_bpp;
7599
7600         pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
7601         if (!pipe_config)
7602                 return ERR_PTR(-ENOMEM);
7603
7604         drm_mode_copy(&pipe_config->adjusted_mode, mode);
7605         drm_mode_copy(&pipe_config->requested_mode, mode);
7606
7607         plane_bpp = pipe_config_set_bpp(crtc, fb, pipe_config);
7608         if (plane_bpp < 0)
7609                 goto fail;
7610
7611         /* Pass our mode to the connectors and the CRTC to give them a chance to
7612          * adjust it according to limitations or connector properties, and also
7613          * a chance to reject the mode entirely.
7614          */
7615         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7616                             base.head) {
7617
7618                 if (&encoder->new_crtc->base != crtc)
7619                         continue;
7620
7621                 if (encoder->compute_config) {
7622                         if (!(encoder->compute_config(encoder, pipe_config))) {
7623                                 DRM_DEBUG_KMS("Encoder config failure\n");
7624                                 goto fail;
7625                         }
7626
7627                         continue;
7628                 }
7629
7630                 encoder_funcs = encoder->base.helper_private;
7631                 if (!(encoder_funcs->mode_fixup(&encoder->base,
7632                                                 &pipe_config->requested_mode,
7633                                                 &pipe_config->adjusted_mode))) {
7634                         DRM_DEBUG_KMS("Encoder fixup failed\n");
7635                         goto fail;
7636                 }
7637         }
7638
7639         if (!(intel_crtc_compute_config(crtc, pipe_config))) {
7640                 DRM_DEBUG_KMS("CRTC fixup failed\n");
7641                 goto fail;
7642         }
7643         DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
7644
7645         pipe_config->dither = pipe_config->pipe_bpp != plane_bpp;
7646         DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
7647                       plane_bpp, pipe_config->pipe_bpp, pipe_config->dither);
7648
7649         return pipe_config;
7650 fail:
7651         kfree(pipe_config);
7652         return ERR_PTR(-EINVAL);
7653 }
7654
7655 /* Computes which crtcs are affected and sets the relevant bits in the mask. For
7656  * simplicity we use the crtc's pipe number (because it's easier to obtain). */
7657 static void
7658 intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
7659                              unsigned *prepare_pipes, unsigned *disable_pipes)
7660 {
7661         struct intel_crtc *intel_crtc;
7662         struct drm_device *dev = crtc->dev;
7663         struct intel_encoder *encoder;
7664         struct intel_connector *connector;
7665         struct drm_crtc *tmp_crtc;
7666
7667         *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
7668
7669         /* Check which crtcs have changed outputs connected to them, these need
7670          * to be part of the prepare_pipes mask. We don't (yet) support global
7671          * modeset across multiple crtcs, so modeset_pipes will only have one
7672          * bit set at most. */
7673         list_for_each_entry(connector, &dev->mode_config.connector_list,
7674                             base.head) {
7675                 if (connector->base.encoder == &connector->new_encoder->base)
7676                         continue;
7677
7678                 if (connector->base.encoder) {
7679                         tmp_crtc = connector->base.encoder->crtc;
7680
7681                         *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
7682                 }
7683
7684                 if (connector->new_encoder)
7685                         *prepare_pipes |=
7686                                 1 << connector->new_encoder->new_crtc->pipe;
7687         }
7688
7689         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7690                             base.head) {
7691                 if (encoder->base.crtc == &encoder->new_crtc->base)
7692                         continue;
7693
7694                 if (encoder->base.crtc) {
7695                         tmp_crtc = encoder->base.crtc;
7696
7697                         *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
7698                 }
7699
7700                 if (encoder->new_crtc)
7701                         *prepare_pipes |= 1 << encoder->new_crtc->pipe;
7702         }
7703
7704         /* Check for any pipes that will be fully disabled ... */
7705         list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
7706                             base.head) {
7707                 bool used = false;
7708
7709                 /* Don't try to disable disabled crtcs. */
7710                 if (!intel_crtc->base.enabled)
7711                         continue;
7712
7713                 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7714                                     base.head) {
7715                         if (encoder->new_crtc == intel_crtc)
7716                                 used = true;
7717                 }
7718
7719                 if (!used)
7720                         *disable_pipes |= 1 << intel_crtc->pipe;
7721         }
7722
7723
7724         /* set_mode is also used to update properties on life display pipes. */
7725         intel_crtc = to_intel_crtc(crtc);
7726         if (crtc->enabled)
7727                 *prepare_pipes |= 1 << intel_crtc->pipe;
7728
7729         /*
7730          * For simplicity do a full modeset on any pipe where the output routing
7731          * changed. We could be more clever, but that would require us to be
7732          * more careful with calling the relevant encoder->mode_set functions.
7733          */
7734         if (*prepare_pipes)
7735                 *modeset_pipes = *prepare_pipes;
7736
7737         /* ... and mask these out. */
7738         *modeset_pipes &= ~(*disable_pipes);
7739         *prepare_pipes &= ~(*disable_pipes);
7740
7741         /*
7742          * HACK: We don't (yet) fully support global modesets. intel_set_config
7743          * obies this rule, but the modeset restore mode of
7744          * intel_modeset_setup_hw_state does not.
7745          */
7746         *modeset_pipes &= 1 << intel_crtc->pipe;
7747         *prepare_pipes &= 1 << intel_crtc->pipe;
7748 }
7749
7750 static bool intel_crtc_in_use(struct drm_crtc *crtc)
7751 {
7752         struct drm_encoder *encoder;
7753         struct drm_device *dev = crtc->dev;
7754
7755         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
7756                 if (encoder->crtc == crtc)
7757                         return true;
7758
7759         return false;
7760 }
7761
7762 static void
7763 intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
7764 {
7765         struct intel_encoder *intel_encoder;
7766         struct intel_crtc *intel_crtc;
7767         struct drm_connector *connector;
7768
7769         list_for_each_entry(intel_encoder, &dev->mode_config.encoder_list,
7770                             base.head) {
7771                 if (!intel_encoder->base.crtc)
7772                         continue;
7773
7774                 intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
7775
7776                 if (prepare_pipes & (1 << intel_crtc->pipe))
7777                         intel_encoder->connectors_active = false;
7778         }
7779
7780         intel_modeset_commit_output_state(dev);
7781
7782         /* Update computed state. */
7783         list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
7784                             base.head) {
7785                 intel_crtc->base.enabled = intel_crtc_in_use(&intel_crtc->base);
7786         }
7787
7788         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
7789                 if (!connector->encoder || !connector->encoder->crtc)
7790                         continue;
7791
7792                 intel_crtc = to_intel_crtc(connector->encoder->crtc);
7793
7794                 if (prepare_pipes & (1 << intel_crtc->pipe)) {
7795                         struct drm_property *dpms_property =
7796                                 dev->mode_config.dpms_property;
7797
7798                         connector->dpms = DRM_MODE_DPMS_ON;
7799                         drm_object_property_set_value(&connector->base,
7800                                                          dpms_property,
7801                                                          DRM_MODE_DPMS_ON);
7802
7803                         intel_encoder = to_intel_encoder(connector->encoder);
7804                         intel_encoder->connectors_active = true;
7805                 }
7806         }
7807
7808 }
7809
7810 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
7811         list_for_each_entry((intel_crtc), \
7812                             &(dev)->mode_config.crtc_list, \
7813                             base.head) \
7814                 if (mask & (1 <<(intel_crtc)->pipe)) \
7815
7816 static bool
7817 intel_pipe_config_compare(struct intel_crtc_config *current_config,
7818                           struct intel_crtc_config *pipe_config)
7819 {
7820         if (current_config->has_pch_encoder != pipe_config->has_pch_encoder) {
7821                 DRM_ERROR("mismatch in has_pch_encoder "
7822                           "(expected %i, found %i)\n",
7823                           current_config->has_pch_encoder,
7824                           pipe_config->has_pch_encoder);
7825                 return false;
7826         }
7827
7828         return true;
7829 }
7830
7831 void
7832 intel_modeset_check_state(struct drm_device *dev)
7833 {
7834         drm_i915_private_t *dev_priv = dev->dev_private;
7835         struct intel_crtc *crtc;
7836         struct intel_encoder *encoder;
7837         struct intel_connector *connector;
7838         struct intel_crtc_config pipe_config;
7839
7840         list_for_each_entry(connector, &dev->mode_config.connector_list,
7841                             base.head) {
7842                 /* This also checks the encoder/connector hw state with the
7843                  * ->get_hw_state callbacks. */
7844                 intel_connector_check_state(connector);
7845
7846                 WARN(&connector->new_encoder->base != connector->base.encoder,
7847                      "connector's staged encoder doesn't match current encoder\n");
7848         }
7849
7850         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7851                             base.head) {
7852                 bool enabled = false;
7853                 bool active = false;
7854                 enum pipe pipe, tracked_pipe;
7855
7856                 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
7857                               encoder->base.base.id,
7858                               drm_get_encoder_name(&encoder->base));
7859
7860                 WARN(&encoder->new_crtc->base != encoder->base.crtc,
7861                      "encoder's stage crtc doesn't match current crtc\n");
7862                 WARN(encoder->connectors_active && !encoder->base.crtc,
7863                      "encoder's active_connectors set, but no crtc\n");
7864
7865                 list_for_each_entry(connector, &dev->mode_config.connector_list,
7866                                     base.head) {
7867                         if (connector->base.encoder != &encoder->base)
7868                                 continue;
7869                         enabled = true;
7870                         if (connector->base.dpms != DRM_MODE_DPMS_OFF)
7871                                 active = true;
7872                 }
7873                 WARN(!!encoder->base.crtc != enabled,
7874                      "encoder's enabled state mismatch "
7875                      "(expected %i, found %i)\n",
7876                      !!encoder->base.crtc, enabled);
7877                 WARN(active && !encoder->base.crtc,
7878                      "active encoder with no crtc\n");
7879
7880                 WARN(encoder->connectors_active != active,
7881                      "encoder's computed active state doesn't match tracked active state "
7882                      "(expected %i, found %i)\n", active, encoder->connectors_active);
7883
7884                 active = encoder->get_hw_state(encoder, &pipe);
7885                 WARN(active != encoder->connectors_active,
7886                      "encoder's hw state doesn't match sw tracking "
7887                      "(expected %i, found %i)\n",
7888                      encoder->connectors_active, active);
7889
7890                 if (!encoder->base.crtc)
7891                         continue;
7892
7893                 tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
7894                 WARN(active && pipe != tracked_pipe,
7895                      "active encoder's pipe doesn't match"
7896                      "(expected %i, found %i)\n",
7897                      tracked_pipe, pipe);
7898
7899         }
7900
7901         list_for_each_entry(crtc, &dev->mode_config.crtc_list,
7902                             base.head) {
7903                 bool enabled = false;
7904                 bool active = false;
7905
7906                 DRM_DEBUG_KMS("[CRTC:%d]\n",
7907                               crtc->base.base.id);
7908
7909                 WARN(crtc->active && !crtc->base.enabled,
7910                      "active crtc, but not enabled in sw tracking\n");
7911
7912                 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7913                                     base.head) {
7914                         if (encoder->base.crtc != &crtc->base)
7915                                 continue;
7916                         enabled = true;
7917                         if (encoder->connectors_active)
7918                                 active = true;
7919                 }
7920                 WARN(active != crtc->active,
7921                      "crtc's computed active state doesn't match tracked active state "
7922                      "(expected %i, found %i)\n", active, crtc->active);
7923                 WARN(enabled != crtc->base.enabled,
7924                      "crtc's computed enabled state doesn't match tracked enabled state "
7925                      "(expected %i, found %i)\n", enabled, crtc->base.enabled);
7926
7927                 memset(&pipe_config, 0, sizeof(pipe_config));
7928                 active = dev_priv->display.get_pipe_config(crtc,
7929                                                            &pipe_config);
7930                 WARN(crtc->active != active,
7931                      "crtc active state doesn't match with hw state "
7932                      "(expected %i, found %i)\n", crtc->active, active);
7933
7934                 WARN(active &&
7935                      !intel_pipe_config_compare(&crtc->config, &pipe_config),
7936                      "pipe state doesn't match!\n");
7937         }
7938 }
7939
7940 static int __intel_set_mode(struct drm_crtc *crtc,
7941                             struct drm_display_mode *mode,
7942                             int x, int y, struct drm_framebuffer *fb)
7943 {
7944         struct drm_device *dev = crtc->dev;
7945         drm_i915_private_t *dev_priv = dev->dev_private;
7946         struct drm_display_mode *saved_mode, *saved_hwmode;
7947         struct intel_crtc_config *pipe_config = NULL;
7948         struct intel_crtc *intel_crtc;
7949         unsigned disable_pipes, prepare_pipes, modeset_pipes;
7950         int ret = 0;
7951
7952         saved_mode = kmalloc(2 * sizeof(*saved_mode), GFP_KERNEL);
7953         if (!saved_mode)
7954                 return -ENOMEM;
7955         saved_hwmode = saved_mode + 1;
7956
7957         intel_modeset_affected_pipes(crtc, &modeset_pipes,
7958                                      &prepare_pipes, &disable_pipes);
7959
7960         *saved_hwmode = crtc->hwmode;
7961         *saved_mode = crtc->mode;
7962
7963         /* Hack: Because we don't (yet) support global modeset on multiple
7964          * crtcs, we don't keep track of the new mode for more than one crtc.
7965          * Hence simply check whether any bit is set in modeset_pipes in all the
7966          * pieces of code that are not yet converted to deal with mutliple crtcs
7967          * changing their mode at the same time. */
7968         if (modeset_pipes) {
7969                 pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
7970                 if (IS_ERR(pipe_config)) {
7971                         ret = PTR_ERR(pipe_config);
7972                         pipe_config = NULL;
7973
7974                         goto out;
7975                 }
7976         }
7977
7978         DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
7979                       modeset_pipes, prepare_pipes, disable_pipes);
7980
7981         for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
7982                 intel_crtc_disable(&intel_crtc->base);
7983
7984         for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
7985                 if (intel_crtc->base.enabled)
7986                         dev_priv->display.crtc_disable(&intel_crtc->base);
7987         }
7988
7989         /* crtc->mode is already used by the ->mode_set callbacks, hence we need
7990          * to set it here already despite that we pass it down the callchain.
7991          */
7992         if (modeset_pipes) {
7993                 enum transcoder tmp = to_intel_crtc(crtc)->config.cpu_transcoder;
7994                 crtc->mode = *mode;
7995                 /* mode_set/enable/disable functions rely on a correct pipe
7996                  * config. */
7997                 to_intel_crtc(crtc)->config = *pipe_config;
7998                 to_intel_crtc(crtc)->config.cpu_transcoder = tmp;
7999         }
8000
8001         /* Only after disabling all output pipelines that will be changed can we
8002          * update the the output configuration. */
8003         intel_modeset_update_state(dev, prepare_pipes);
8004
8005         if (dev_priv->display.modeset_global_resources)
8006                 dev_priv->display.modeset_global_resources(dev);
8007
8008         /* Set up the DPLL and any encoders state that needs to adjust or depend
8009          * on the DPLL.
8010          */
8011         for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
8012                 ret = intel_crtc_mode_set(&intel_crtc->base,
8013                                           x, y, fb);
8014                 if (ret)
8015                         goto done;
8016         }
8017
8018         /* Now enable the clocks, plane, pipe, and connectors that we set up. */
8019         for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc)
8020                 dev_priv->display.crtc_enable(&intel_crtc->base);
8021
8022         if (modeset_pipes) {
8023                 /* Store real post-adjustment hardware mode. */
8024                 crtc->hwmode = pipe_config->adjusted_mode;
8025
8026                 /* Calculate and store various constants which
8027                  * are later needed by vblank and swap-completion
8028                  * timestamping. They are derived from true hwmode.
8029                  */
8030                 drm_calc_timestamping_constants(crtc);
8031         }
8032
8033         /* FIXME: add subpixel order */
8034 done:
8035         if (ret && crtc->enabled) {
8036                 crtc->hwmode = *saved_hwmode;
8037                 crtc->mode = *saved_mode;
8038         }
8039
8040 out:
8041         kfree(pipe_config);
8042         kfree(saved_mode);
8043         return ret;
8044 }
8045
8046 int intel_set_mode(struct drm_crtc *crtc,
8047                      struct drm_display_mode *mode,
8048                      int x, int y, struct drm_framebuffer *fb)
8049 {
8050         int ret;
8051
8052         ret = __intel_set_mode(crtc, mode, x, y, fb);
8053
8054         if (ret == 0)
8055                 intel_modeset_check_state(crtc->dev);
8056
8057         return ret;
8058 }
8059
8060 void intel_crtc_restore_mode(struct drm_crtc *crtc)
8061 {
8062         intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb);
8063 }
8064
8065 #undef for_each_intel_crtc_masked
8066
8067 static void intel_set_config_free(struct intel_set_config *config)
8068 {
8069         if (!config)
8070                 return;
8071
8072         kfree(config->save_connector_encoders);
8073         kfree(config->save_encoder_crtcs);
8074         kfree(config);
8075 }
8076
8077 static int intel_set_config_save_state(struct drm_device *dev,
8078                                        struct intel_set_config *config)
8079 {
8080         struct drm_encoder *encoder;
8081         struct drm_connector *connector;
8082         int count;
8083
8084         config->save_encoder_crtcs =
8085                 kcalloc(dev->mode_config.num_encoder,
8086                         sizeof(struct drm_crtc *), GFP_KERNEL);
8087         if (!config->save_encoder_crtcs)
8088                 return -ENOMEM;
8089
8090         config->save_connector_encoders =
8091                 kcalloc(dev->mode_config.num_connector,
8092                         sizeof(struct drm_encoder *), GFP_KERNEL);
8093         if (!config->save_connector_encoders)
8094                 return -ENOMEM;
8095
8096         /* Copy data. Note that driver private data is not affected.
8097          * Should anything bad happen only the expected state is
8098          * restored, not the drivers personal bookkeeping.
8099          */
8100         count = 0;
8101         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
8102                 config->save_encoder_crtcs[count++] = encoder->crtc;
8103         }
8104
8105         count = 0;
8106         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
8107                 config->save_connector_encoders[count++] = connector->encoder;
8108         }
8109
8110         return 0;
8111 }
8112
8113 static void intel_set_config_restore_state(struct drm_device *dev,
8114                                            struct intel_set_config *config)
8115 {
8116         struct intel_encoder *encoder;
8117         struct intel_connector *connector;
8118         int count;
8119
8120         count = 0;
8121         list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
8122                 encoder->new_crtc =
8123                         to_intel_crtc(config->save_encoder_crtcs[count++]);
8124         }
8125
8126         count = 0;
8127         list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
8128                 connector->new_encoder =
8129                         to_intel_encoder(config->save_connector_encoders[count++]);
8130         }
8131 }
8132
8133 static void
8134 intel_set_config_compute_mode_changes(struct drm_mode_set *set,
8135                                       struct intel_set_config *config)
8136 {
8137
8138         /* We should be able to check here if the fb has the same properties
8139          * and then just flip_or_move it */
8140         if (set->crtc->fb != set->fb) {
8141                 /* If we have no fb then treat it as a full mode set */
8142                 if (set->crtc->fb == NULL) {
8143                         DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
8144                         config->mode_changed = true;
8145                 } else if (set->fb == NULL) {
8146                         config->mode_changed = true;
8147                 } else if (set->fb->pixel_format !=
8148                            set->crtc->fb->pixel_format) {
8149                         config->mode_changed = true;
8150                 } else
8151                         config->fb_changed = true;
8152         }
8153
8154         if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
8155                 config->fb_changed = true;
8156
8157         if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
8158                 DRM_DEBUG_KMS("modes are different, full mode set\n");
8159                 drm_mode_debug_printmodeline(&set->crtc->mode);
8160                 drm_mode_debug_printmodeline(set->mode);
8161                 config->mode_changed = true;
8162         }
8163 }
8164
8165 static int
8166 intel_modeset_stage_output_state(struct drm_device *dev,
8167                                  struct drm_mode_set *set,
8168                                  struct intel_set_config *config)
8169 {
8170         struct drm_crtc *new_crtc;
8171         struct intel_connector *connector;
8172         struct intel_encoder *encoder;
8173         int count, ro;
8174
8175         /* The upper layers ensure that we either disable a crtc or have a list
8176          * of connectors. For paranoia, double-check this. */
8177         WARN_ON(!set->fb && (set->num_connectors != 0));
8178         WARN_ON(set->fb && (set->num_connectors == 0));
8179
8180         count = 0;
8181         list_for_each_entry(connector, &dev->mode_config.connector_list,
8182                             base.head) {
8183                 /* Otherwise traverse passed in connector list and get encoders
8184                  * for them. */
8185                 for (ro = 0; ro < set->num_connectors; ro++) {
8186                         if (set->connectors[ro] == &connector->base) {
8187                                 connector->new_encoder = connector->encoder;
8188                                 break;
8189                         }
8190                 }
8191
8192                 /* If we disable the crtc, disable all its connectors. Also, if
8193                  * the connector is on the changing crtc but not on the new
8194                  * connector list, disable it. */
8195                 if ((!set->fb || ro == set->num_connectors) &&
8196                     connector->base.encoder &&
8197                     connector->base.encoder->crtc == set->crtc) {
8198                         connector->new_encoder = NULL;
8199
8200                         DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
8201                                 connector->base.base.id,
8202                                 drm_get_connector_name(&connector->base));
8203                 }
8204
8205
8206                 if (&connector->new_encoder->base != connector->base.encoder) {
8207                         DRM_DEBUG_KMS("encoder changed, full mode switch\n");
8208                         config->mode_changed = true;
8209                 }
8210         }
8211         /* connector->new_encoder is now updated for all connectors. */
8212
8213         /* Update crtc of enabled connectors. */
8214         count = 0;
8215         list_for_each_entry(connector, &dev->mode_config.connector_list,
8216                             base.head) {
8217                 if (!connector->new_encoder)
8218                         continue;
8219
8220                 new_crtc = connector->new_encoder->base.crtc;
8221
8222                 for (ro = 0; ro < set->num_connectors; ro++) {
8223                         if (set->connectors[ro] == &connector->base)
8224                                 new_crtc = set->crtc;
8225                 }
8226
8227                 /* Make sure the new CRTC will work with the encoder */
8228                 if (!intel_encoder_crtc_ok(&connector->new_encoder->base,
8229                                            new_crtc)) {
8230                         return -EINVAL;
8231                 }
8232                 connector->encoder->new_crtc = to_intel_crtc(new_crtc);
8233
8234                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
8235                         connector->base.base.id,
8236                         drm_get_connector_name(&connector->base),
8237                         new_crtc->base.id);
8238         }
8239
8240         /* Check for any encoders that needs to be disabled. */
8241         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8242                             base.head) {
8243                 list_for_each_entry(connector,
8244                                     &dev->mode_config.connector_list,
8245                                     base.head) {
8246                         if (connector->new_encoder == encoder) {
8247                                 WARN_ON(!connector->new_encoder->new_crtc);
8248
8249                                 goto next_encoder;
8250                         }
8251                 }
8252                 encoder->new_crtc = NULL;
8253 next_encoder:
8254                 /* Only now check for crtc changes so we don't miss encoders
8255                  * that will be disabled. */
8256                 if (&encoder->new_crtc->base != encoder->base.crtc) {
8257                         DRM_DEBUG_KMS("crtc changed, full mode switch\n");
8258                         config->mode_changed = true;
8259                 }
8260         }
8261         /* Now we've also updated encoder->new_crtc for all encoders. */
8262
8263         return 0;
8264 }
8265
8266 static int intel_crtc_set_config(struct drm_mode_set *set)
8267 {
8268         struct drm_device *dev;
8269         struct drm_mode_set save_set;
8270         struct intel_set_config *config;
8271         int ret;
8272
8273         BUG_ON(!set);
8274         BUG_ON(!set->crtc);
8275         BUG_ON(!set->crtc->helper_private);
8276
8277         /* Enforce sane interface api - has been abused by the fb helper. */
8278         BUG_ON(!set->mode && set->fb);
8279         BUG_ON(set->fb && set->num_connectors == 0);
8280
8281         if (set->fb) {
8282                 DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
8283                                 set->crtc->base.id, set->fb->base.id,
8284                                 (int)set->num_connectors, set->x, set->y);
8285         } else {
8286                 DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
8287         }
8288
8289         dev = set->crtc->dev;
8290
8291         ret = -ENOMEM;
8292         config = kzalloc(sizeof(*config), GFP_KERNEL);
8293         if (!config)
8294                 goto out_config;
8295
8296         ret = intel_set_config_save_state(dev, config);
8297         if (ret)
8298                 goto out_config;
8299
8300         save_set.crtc = set->crtc;
8301         save_set.mode = &set->crtc->mode;
8302         save_set.x = set->crtc->x;
8303         save_set.y = set->crtc->y;
8304         save_set.fb = set->crtc->fb;
8305
8306         /* Compute whether we need a full modeset, only an fb base update or no
8307          * change at all. In the future we might also check whether only the
8308          * mode changed, e.g. for LVDS where we only change the panel fitter in
8309          * such cases. */
8310         intel_set_config_compute_mode_changes(set, config);
8311
8312         ret = intel_modeset_stage_output_state(dev, set, config);
8313         if (ret)
8314                 goto fail;
8315
8316         if (config->mode_changed) {
8317                 if (set->mode) {
8318                         DRM_DEBUG_KMS("attempting to set mode from"
8319                                         " userspace\n");
8320                         drm_mode_debug_printmodeline(set->mode);
8321                 }
8322
8323                 ret = intel_set_mode(set->crtc, set->mode,
8324                                      set->x, set->y, set->fb);
8325                 if (ret) {
8326                         DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n",
8327                                   set->crtc->base.id, ret);
8328                         goto fail;
8329                 }
8330         } else if (config->fb_changed) {
8331                 intel_crtc_wait_for_pending_flips(set->crtc);
8332
8333                 ret = intel_pipe_set_base(set->crtc,
8334                                           set->x, set->y, set->fb);
8335         }
8336
8337         intel_set_config_free(config);
8338
8339         return 0;
8340
8341 fail:
8342         intel_set_config_restore_state(dev, config);
8343
8344         /* Try to restore the config */
8345         if (config->mode_changed &&
8346             intel_set_mode(save_set.crtc, save_set.mode,
8347                            save_set.x, save_set.y, save_set.fb))
8348                 DRM_ERROR("failed to restore config after modeset failure\n");
8349
8350 out_config:
8351         intel_set_config_free(config);
8352         return ret;
8353 }
8354
8355 static const struct drm_crtc_funcs intel_crtc_funcs = {
8356         .cursor_set = intel_crtc_cursor_set,
8357         .cursor_move = intel_crtc_cursor_move,
8358         .gamma_set = intel_crtc_gamma_set,
8359         .set_config = intel_crtc_set_config,
8360         .destroy = intel_crtc_destroy,
8361         .page_flip = intel_crtc_page_flip,
8362 };
8363
8364 static void intel_cpu_pll_init(struct drm_device *dev)
8365 {
8366         if (HAS_DDI(dev))
8367                 intel_ddi_pll_init(dev);
8368 }
8369
8370 static void intel_pch_pll_init(struct drm_device *dev)
8371 {
8372         drm_i915_private_t *dev_priv = dev->dev_private;
8373         int i;
8374
8375         if (dev_priv->num_pch_pll == 0) {
8376                 DRM_DEBUG_KMS("No PCH PLLs on this hardware, skipping initialisation\n");
8377                 return;
8378         }
8379
8380         for (i = 0; i < dev_priv->num_pch_pll; i++) {
8381                 dev_priv->pch_plls[i].pll_reg = _PCH_DPLL(i);
8382                 dev_priv->pch_plls[i].fp0_reg = _PCH_FP0(i);
8383                 dev_priv->pch_plls[i].fp1_reg = _PCH_FP1(i);
8384         }
8385 }
8386
8387 static void intel_crtc_init(struct drm_device *dev, int pipe)
8388 {
8389         drm_i915_private_t *dev_priv = dev->dev_private;
8390         struct intel_crtc *intel_crtc;
8391         int i;
8392
8393         intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
8394         if (intel_crtc == NULL)
8395                 return;
8396
8397         drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
8398
8399         drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
8400         for (i = 0; i < 256; i++) {
8401                 intel_crtc->lut_r[i] = i;
8402                 intel_crtc->lut_g[i] = i;
8403                 intel_crtc->lut_b[i] = i;
8404         }
8405
8406         /* Swap pipes & planes for FBC on pre-965 */
8407         intel_crtc->pipe = pipe;
8408         intel_crtc->plane = pipe;
8409         intel_crtc->config.cpu_transcoder = pipe;
8410         if (IS_MOBILE(dev) && IS_GEN3(dev)) {
8411                 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
8412                 intel_crtc->plane = !pipe;
8413         }
8414
8415         BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
8416                dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
8417         dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
8418         dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
8419
8420         drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
8421 }
8422
8423 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
8424                                 struct drm_file *file)
8425 {
8426         struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
8427         struct drm_mode_object *drmmode_obj;
8428         struct intel_crtc *crtc;
8429
8430         if (!drm_core_check_feature(dev, DRIVER_MODESET))
8431                 return -ENODEV;
8432
8433         drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
8434                         DRM_MODE_OBJECT_CRTC);
8435
8436         if (!drmmode_obj) {
8437                 DRM_ERROR("no such CRTC id\n");
8438                 return -EINVAL;
8439         }
8440
8441         crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
8442         pipe_from_crtc_id->pipe = crtc->pipe;
8443
8444         return 0;
8445 }
8446
8447 static int intel_encoder_clones(struct intel_encoder *encoder)
8448 {
8449         struct drm_device *dev = encoder->base.dev;
8450         struct intel_encoder *source_encoder;
8451         int index_mask = 0;
8452         int entry = 0;
8453
8454         list_for_each_entry(source_encoder,
8455                             &dev->mode_config.encoder_list, base.head) {
8456
8457                 if (encoder == source_encoder)
8458                         index_mask |= (1 << entry);
8459
8460                 /* Intel hw has only one MUX where enocoders could be cloned. */
8461                 if (encoder->cloneable && source_encoder->cloneable)
8462                         index_mask |= (1 << entry);
8463
8464                 entry++;
8465         }
8466
8467         return index_mask;
8468 }
8469
8470 static bool has_edp_a(struct drm_device *dev)
8471 {
8472         struct drm_i915_private *dev_priv = dev->dev_private;
8473
8474         if (!IS_MOBILE(dev))
8475                 return false;
8476
8477         if ((I915_READ(DP_A) & DP_DETECTED) == 0)
8478                 return false;
8479
8480         if (IS_GEN5(dev) &&
8481             (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
8482                 return false;
8483
8484         return true;
8485 }
8486
8487 static void intel_setup_outputs(struct drm_device *dev)
8488 {
8489         struct drm_i915_private *dev_priv = dev->dev_private;
8490         struct intel_encoder *encoder;
8491         bool dpd_is_edp = false;
8492         bool has_lvds;
8493
8494         has_lvds = intel_lvds_init(dev);
8495         if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
8496                 /* disable the panel fitter on everything but LVDS */
8497                 I915_WRITE(PFIT_CONTROL, 0);
8498         }
8499
8500         if (!IS_ULT(dev))
8501                 intel_crt_init(dev);
8502
8503         if (HAS_DDI(dev)) {
8504                 int found;
8505
8506                 /* Haswell uses DDI functions to detect digital outputs */
8507                 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
8508                 /* DDI A only supports eDP */
8509                 if (found)
8510                         intel_ddi_init(dev, PORT_A);
8511
8512                 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
8513                  * register */
8514                 found = I915_READ(SFUSE_STRAP);
8515
8516                 if (found & SFUSE_STRAP_DDIB_DETECTED)
8517                         intel_ddi_init(dev, PORT_B);
8518                 if (found & SFUSE_STRAP_DDIC_DETECTED)
8519                         intel_ddi_init(dev, PORT_C);
8520                 if (found & SFUSE_STRAP_DDID_DETECTED)
8521                         intel_ddi_init(dev, PORT_D);
8522         } else if (HAS_PCH_SPLIT(dev)) {
8523                 int found;
8524                 dpd_is_edp = intel_dpd_is_edp(dev);
8525
8526                 if (has_edp_a(dev))
8527                         intel_dp_init(dev, DP_A, PORT_A);
8528
8529                 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
8530                         /* PCH SDVOB multiplex with HDMIB */
8531                         found = intel_sdvo_init(dev, PCH_SDVOB, true);
8532                         if (!found)
8533                                 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
8534                         if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
8535                                 intel_dp_init(dev, PCH_DP_B, PORT_B);
8536                 }
8537
8538                 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
8539                         intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
8540
8541                 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
8542                         intel_hdmi_init(dev, PCH_HDMID, PORT_D);
8543
8544                 if (I915_READ(PCH_DP_C) & DP_DETECTED)
8545                         intel_dp_init(dev, PCH_DP_C, PORT_C);
8546
8547                 if (I915_READ(PCH_DP_D) & DP_DETECTED)
8548                         intel_dp_init(dev, PCH_DP_D, PORT_D);
8549         } else if (IS_VALLEYVIEW(dev)) {
8550                 /* Check for built-in panel first. Shares lanes with HDMI on SDVOC */
8551                 if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
8552                         intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
8553
8554                 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) {
8555                         intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
8556                                         PORT_B);
8557                         if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
8558                                 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
8559                 }
8560         } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
8561                 bool found = false;
8562
8563                 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
8564                         DRM_DEBUG_KMS("probing SDVOB\n");
8565                         found = intel_sdvo_init(dev, GEN3_SDVOB, true);
8566                         if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
8567                                 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
8568                                 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
8569                         }
8570
8571                         if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
8572                                 DRM_DEBUG_KMS("probing DP_B\n");
8573                                 intel_dp_init(dev, DP_B, PORT_B);
8574                         }
8575                 }
8576
8577                 /* Before G4X SDVOC doesn't have its own detect register */
8578
8579                 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
8580                         DRM_DEBUG_KMS("probing SDVOC\n");
8581                         found = intel_sdvo_init(dev, GEN3_SDVOC, false);
8582                 }
8583
8584                 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
8585
8586                         if (SUPPORTS_INTEGRATED_HDMI(dev)) {
8587                                 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
8588                                 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
8589                         }
8590                         if (SUPPORTS_INTEGRATED_DP(dev)) {
8591                                 DRM_DEBUG_KMS("probing DP_C\n");
8592                                 intel_dp_init(dev, DP_C, PORT_C);
8593                         }
8594                 }
8595
8596                 if (SUPPORTS_INTEGRATED_DP(dev) &&
8597                     (I915_READ(DP_D) & DP_DETECTED)) {
8598                         DRM_DEBUG_KMS("probing DP_D\n");
8599                         intel_dp_init(dev, DP_D, PORT_D);
8600                 }
8601         } else if (IS_GEN2(dev))
8602                 intel_dvo_init(dev);
8603
8604         if (SUPPORTS_TV(dev))
8605                 intel_tv_init(dev);
8606
8607         list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
8608                 encoder->base.possible_crtcs = encoder->crtc_mask;
8609                 encoder->base.possible_clones =
8610                         intel_encoder_clones(encoder);
8611         }
8612
8613         intel_init_pch_refclk(dev);
8614
8615         drm_helper_move_panel_connectors_to_head(dev);
8616 }
8617
8618 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
8619 {
8620         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
8621
8622         drm_framebuffer_cleanup(fb);
8623         drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
8624
8625         kfree(intel_fb);
8626 }
8627
8628 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
8629                                                 struct drm_file *file,
8630                                                 unsigned int *handle)
8631 {
8632         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
8633         struct drm_i915_gem_object *obj = intel_fb->obj;
8634
8635         return drm_gem_handle_create(file, &obj->base, handle);
8636 }
8637
8638 static const struct drm_framebuffer_funcs intel_fb_funcs = {
8639         .destroy = intel_user_framebuffer_destroy,
8640         .create_handle = intel_user_framebuffer_create_handle,
8641 };
8642
8643 int intel_framebuffer_init(struct drm_device *dev,
8644                            struct intel_framebuffer *intel_fb,
8645                            struct drm_mode_fb_cmd2 *mode_cmd,
8646                            struct drm_i915_gem_object *obj)
8647 {
8648         int ret;
8649
8650         if (obj->tiling_mode == I915_TILING_Y) {
8651                 DRM_DEBUG("hardware does not support tiling Y\n");
8652                 return -EINVAL;
8653         }
8654
8655         if (mode_cmd->pitches[0] & 63) {
8656                 DRM_DEBUG("pitch (%d) must be at least 64 byte aligned\n",
8657                           mode_cmd->pitches[0]);
8658                 return -EINVAL;
8659         }
8660
8661         /* FIXME <= Gen4 stride limits are bit unclear */
8662         if (mode_cmd->pitches[0] > 32768) {
8663                 DRM_DEBUG("pitch (%d) must be at less than 32768\n",
8664                           mode_cmd->pitches[0]);
8665                 return -EINVAL;
8666         }
8667
8668         if (obj->tiling_mode != I915_TILING_NONE &&
8669             mode_cmd->pitches[0] != obj->stride) {
8670                 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
8671                           mode_cmd->pitches[0], obj->stride);
8672                 return -EINVAL;
8673         }
8674
8675         /* Reject formats not supported by any plane early. */
8676         switch (mode_cmd->pixel_format) {
8677         case DRM_FORMAT_C8:
8678         case DRM_FORMAT_RGB565:
8679         case DRM_FORMAT_XRGB8888:
8680         case DRM_FORMAT_ARGB8888:
8681                 break;
8682         case DRM_FORMAT_XRGB1555:
8683         case DRM_FORMAT_ARGB1555:
8684                 if (INTEL_INFO(dev)->gen > 3) {
8685                         DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format);
8686                         return -EINVAL;
8687                 }
8688                 break;
8689         case DRM_FORMAT_XBGR8888:
8690         case DRM_FORMAT_ABGR8888:
8691         case DRM_FORMAT_XRGB2101010:
8692         case DRM_FORMAT_ARGB2101010:
8693         case DRM_FORMAT_XBGR2101010:
8694         case DRM_FORMAT_ABGR2101010:
8695                 if (INTEL_INFO(dev)->gen < 4) {
8696                         DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format);
8697                         return -EINVAL;
8698                 }
8699                 break;
8700         case DRM_FORMAT_YUYV:
8701         case DRM_FORMAT_UYVY:
8702         case DRM_FORMAT_YVYU:
8703         case DRM_FORMAT_VYUY:
8704                 if (INTEL_INFO(dev)->gen < 5) {
8705                         DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format);
8706                         return -EINVAL;
8707                 }
8708                 break;
8709         default:
8710                 DRM_DEBUG("unsupported pixel format 0x%08x\n", mode_cmd->pixel_format);
8711                 return -EINVAL;
8712         }
8713
8714         /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
8715         if (mode_cmd->offsets[0] != 0)
8716                 return -EINVAL;
8717
8718         drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
8719         intel_fb->obj = obj;
8720
8721         ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
8722         if (ret) {
8723                 DRM_ERROR("framebuffer init failed %d\n", ret);
8724                 return ret;
8725         }
8726
8727         return 0;
8728 }
8729
8730 static struct drm_framebuffer *
8731 intel_user_framebuffer_create(struct drm_device *dev,
8732                               struct drm_file *filp,
8733                               struct drm_mode_fb_cmd2 *mode_cmd)
8734 {
8735         struct drm_i915_gem_object *obj;
8736
8737         obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
8738                                                 mode_cmd->handles[0]));
8739         if (&obj->base == NULL)
8740                 return ERR_PTR(-ENOENT);
8741
8742         return intel_framebuffer_create(dev, mode_cmd, obj);
8743 }
8744
8745 static const struct drm_mode_config_funcs intel_mode_funcs = {
8746         .fb_create = intel_user_framebuffer_create,
8747         .output_poll_changed = intel_fb_output_poll_changed,
8748 };
8749
8750 /* Set up chip specific display functions */
8751 static void intel_init_display(struct drm_device *dev)
8752 {
8753         struct drm_i915_private *dev_priv = dev->dev_private;
8754
8755         if (HAS_DDI(dev)) {
8756                 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
8757                 dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
8758                 dev_priv->display.crtc_enable = haswell_crtc_enable;
8759                 dev_priv->display.crtc_disable = haswell_crtc_disable;
8760                 dev_priv->display.off = haswell_crtc_off;
8761                 dev_priv->display.update_plane = ironlake_update_plane;
8762         } else if (HAS_PCH_SPLIT(dev)) {
8763                 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
8764                 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
8765                 dev_priv->display.crtc_enable = ironlake_crtc_enable;
8766                 dev_priv->display.crtc_disable = ironlake_crtc_disable;
8767                 dev_priv->display.off = ironlake_crtc_off;
8768                 dev_priv->display.update_plane = ironlake_update_plane;
8769         } else {
8770                 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
8771                 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
8772                 dev_priv->display.crtc_enable = i9xx_crtc_enable;
8773                 dev_priv->display.crtc_disable = i9xx_crtc_disable;
8774                 dev_priv->display.off = i9xx_crtc_off;
8775                 dev_priv->display.update_plane = i9xx_update_plane;
8776         }
8777
8778         /* Returns the core display clock speed */
8779         if (IS_VALLEYVIEW(dev))
8780                 dev_priv->display.get_display_clock_speed =
8781                         valleyview_get_display_clock_speed;
8782         else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
8783                 dev_priv->display.get_display_clock_speed =
8784                         i945_get_display_clock_speed;
8785         else if (IS_I915G(dev))
8786                 dev_priv->display.get_display_clock_speed =
8787                         i915_get_display_clock_speed;
8788         else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
8789                 dev_priv->display.get_display_clock_speed =
8790                         i9xx_misc_get_display_clock_speed;
8791         else if (IS_I915GM(dev))
8792                 dev_priv->display.get_display_clock_speed =
8793                         i915gm_get_display_clock_speed;
8794         else if (IS_I865G(dev))
8795                 dev_priv->display.get_display_clock_speed =
8796                         i865_get_display_clock_speed;
8797         else if (IS_I85X(dev))
8798                 dev_priv->display.get_display_clock_speed =
8799                         i855_get_display_clock_speed;
8800         else /* 852, 830 */
8801                 dev_priv->display.get_display_clock_speed =
8802                         i830_get_display_clock_speed;
8803
8804         if (HAS_PCH_SPLIT(dev)) {
8805                 if (IS_GEN5(dev)) {
8806                         dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
8807                         dev_priv->display.write_eld = ironlake_write_eld;
8808                 } else if (IS_GEN6(dev)) {
8809                         dev_priv->display.fdi_link_train = gen6_fdi_link_train;
8810                         dev_priv->display.write_eld = ironlake_write_eld;
8811                 } else if (IS_IVYBRIDGE(dev)) {
8812                         /* FIXME: detect B0+ stepping and use auto training */
8813                         dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
8814                         dev_priv->display.write_eld = ironlake_write_eld;
8815                         dev_priv->display.modeset_global_resources =
8816                                 ivb_modeset_global_resources;
8817                 } else if (IS_HASWELL(dev)) {
8818                         dev_priv->display.fdi_link_train = hsw_fdi_link_train;
8819                         dev_priv->display.write_eld = haswell_write_eld;
8820                         dev_priv->display.modeset_global_resources =
8821                                 haswell_modeset_global_resources;
8822                 }
8823         } else if (IS_G4X(dev)) {
8824                 dev_priv->display.write_eld = g4x_write_eld;
8825         }
8826
8827         /* Default just returns -ENODEV to indicate unsupported */
8828         dev_priv->display.queue_flip = intel_default_queue_flip;
8829
8830         switch (INTEL_INFO(dev)->gen) {
8831         case 2:
8832                 dev_priv->display.queue_flip = intel_gen2_queue_flip;
8833                 break;
8834
8835         case 3:
8836                 dev_priv->display.queue_flip = intel_gen3_queue_flip;
8837                 break;
8838
8839         case 4:
8840         case 5:
8841                 dev_priv->display.queue_flip = intel_gen4_queue_flip;
8842                 break;
8843
8844         case 6:
8845                 dev_priv->display.queue_flip = intel_gen6_queue_flip;
8846                 break;
8847         case 7:
8848                 dev_priv->display.queue_flip = intel_gen7_queue_flip;
8849                 break;
8850         }
8851 }
8852
8853 /*
8854  * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
8855  * resume, or other times.  This quirk makes sure that's the case for
8856  * affected systems.
8857  */
8858 static void quirk_pipea_force(struct drm_device *dev)
8859 {
8860         struct drm_i915_private *dev_priv = dev->dev_private;
8861
8862         dev_priv->quirks |= QUIRK_PIPEA_FORCE;
8863         DRM_INFO("applying pipe a force quirk\n");
8864 }
8865
8866 /*
8867  * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
8868  */
8869 static void quirk_ssc_force_disable(struct drm_device *dev)
8870 {
8871         struct drm_i915_private *dev_priv = dev->dev_private;
8872         dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
8873         DRM_INFO("applying lvds SSC disable quirk\n");
8874 }
8875
8876 /*
8877  * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
8878  * brightness value
8879  */
8880 static void quirk_invert_brightness(struct drm_device *dev)
8881 {
8882         struct drm_i915_private *dev_priv = dev->dev_private;
8883         dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
8884         DRM_INFO("applying inverted panel brightness quirk\n");
8885 }
8886
8887 struct intel_quirk {
8888         int device;
8889         int subsystem_vendor;
8890         int subsystem_device;
8891         void (*hook)(struct drm_device *dev);
8892 };
8893
8894 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
8895 struct intel_dmi_quirk {
8896         void (*hook)(struct drm_device *dev);
8897         const struct dmi_system_id (*dmi_id_list)[];
8898 };
8899
8900 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
8901 {
8902         DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
8903         return 1;
8904 }
8905
8906 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
8907         {
8908                 .dmi_id_list = &(const struct dmi_system_id[]) {
8909                         {
8910                                 .callback = intel_dmi_reverse_brightness,
8911                                 .ident = "NCR Corporation",
8912                                 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
8913                                             DMI_MATCH(DMI_PRODUCT_NAME, ""),
8914                                 },
8915                         },
8916                         { }  /* terminating entry */
8917                 },
8918                 .hook = quirk_invert_brightness,
8919         },
8920 };
8921
8922 static struct intel_quirk intel_quirks[] = {
8923         /* HP Mini needs pipe A force quirk (LP: #322104) */
8924         { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
8925
8926         /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
8927         { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
8928
8929         /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
8930         { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
8931
8932         /* 830/845 need to leave pipe A & dpll A up */
8933         { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
8934         { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
8935
8936         /* Lenovo U160 cannot use SSC on LVDS */
8937         { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
8938
8939         /* Sony Vaio Y cannot use SSC on LVDS */
8940         { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
8941
8942         /* Acer Aspire 5734Z must invert backlight brightness */
8943         { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
8944
8945         /* Acer/eMachines G725 */
8946         { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
8947
8948         /* Acer/eMachines e725 */
8949         { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
8950
8951         /* Acer/Packard Bell NCL20 */
8952         { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
8953
8954         /* Acer Aspire 4736Z */
8955         { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
8956 };
8957
8958 static void intel_init_quirks(struct drm_device *dev)
8959 {
8960         struct pci_dev *d = dev->pdev;
8961         int i;
8962
8963         for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
8964                 struct intel_quirk *q = &intel_quirks[i];
8965
8966                 if (d->device == q->device &&
8967                     (d->subsystem_vendor == q->subsystem_vendor ||
8968                      q->subsystem_vendor == PCI_ANY_ID) &&
8969                     (d->subsystem_device == q->subsystem_device ||
8970                      q->subsystem_device == PCI_ANY_ID))
8971                         q->hook(dev);
8972         }
8973         for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
8974                 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
8975                         intel_dmi_quirks[i].hook(dev);
8976         }
8977 }
8978
8979 /* Disable the VGA plane that we never use */
8980 static void i915_disable_vga(struct drm_device *dev)
8981 {
8982         struct drm_i915_private *dev_priv = dev->dev_private;
8983         u8 sr1;
8984         u32 vga_reg = i915_vgacntrl_reg(dev);
8985
8986         vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
8987         outb(SR01, VGA_SR_INDEX);
8988         sr1 = inb(VGA_SR_DATA);
8989         outb(sr1 | 1<<5, VGA_SR_DATA);
8990         vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
8991         udelay(300);
8992
8993         I915_WRITE(vga_reg, VGA_DISP_DISABLE);
8994         POSTING_READ(vga_reg);
8995 }
8996
8997 void intel_modeset_init_hw(struct drm_device *dev)
8998 {
8999         intel_init_power_well(dev);
9000
9001         intel_prepare_ddi(dev);
9002
9003         intel_init_clock_gating(dev);
9004
9005         mutex_lock(&dev->struct_mutex);
9006         intel_enable_gt_powersave(dev);
9007         mutex_unlock(&dev->struct_mutex);
9008 }
9009
9010 void intel_modeset_init(struct drm_device *dev)
9011 {
9012         struct drm_i915_private *dev_priv = dev->dev_private;
9013         int i, j, ret;
9014
9015         drm_mode_config_init(dev);
9016
9017         dev->mode_config.min_width = 0;
9018         dev->mode_config.min_height = 0;
9019
9020         dev->mode_config.preferred_depth = 24;
9021         dev->mode_config.prefer_shadow = 1;
9022
9023         dev->mode_config.funcs = &intel_mode_funcs;
9024
9025         intel_init_quirks(dev);
9026
9027         intel_init_pm(dev);
9028
9029         if (INTEL_INFO(dev)->num_pipes == 0)
9030                 return;
9031
9032         intel_init_display(dev);
9033
9034         if (IS_GEN2(dev)) {
9035                 dev->mode_config.max_width = 2048;
9036                 dev->mode_config.max_height = 2048;
9037         } else if (IS_GEN3(dev)) {
9038                 dev->mode_config.max_width = 4096;
9039                 dev->mode_config.max_height = 4096;
9040         } else {
9041                 dev->mode_config.max_width = 8192;
9042                 dev->mode_config.max_height = 8192;
9043         }
9044         dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
9045
9046         DRM_DEBUG_KMS("%d display pipe%s available.\n",
9047                       INTEL_INFO(dev)->num_pipes,
9048                       INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
9049
9050         for (i = 0; i < INTEL_INFO(dev)->num_pipes; i++) {
9051                 intel_crtc_init(dev, i);
9052                 for (j = 0; j < dev_priv->num_plane; j++) {
9053                         ret = intel_plane_init(dev, i, j);
9054                         if (ret)
9055                                 DRM_DEBUG_KMS("pipe %d plane %d init failed: %d\n",
9056                                               i, j, ret);
9057                 }
9058         }
9059
9060         intel_cpu_pll_init(dev);
9061         intel_pch_pll_init(dev);
9062
9063         /* Just disable it once at startup */
9064         i915_disable_vga(dev);
9065         intel_setup_outputs(dev);
9066
9067         /* Just in case the BIOS is doing something questionable. */
9068         intel_disable_fbc(dev);
9069 }
9070
9071 static void
9072 intel_connector_break_all_links(struct intel_connector *connector)
9073 {
9074         connector->base.dpms = DRM_MODE_DPMS_OFF;
9075         connector->base.encoder = NULL;
9076         connector->encoder->connectors_active = false;
9077         connector->encoder->base.crtc = NULL;
9078 }
9079
9080 static void intel_enable_pipe_a(struct drm_device *dev)
9081 {
9082         struct intel_connector *connector;
9083         struct drm_connector *crt = NULL;
9084         struct intel_load_detect_pipe load_detect_temp;
9085
9086         /* We can't just switch on the pipe A, we need to set things up with a
9087          * proper mode and output configuration. As a gross hack, enable pipe A
9088          * by enabling the load detect pipe once. */
9089         list_for_each_entry(connector,
9090                             &dev->mode_config.connector_list,
9091                             base.head) {
9092                 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
9093                         crt = &connector->base;
9094                         break;
9095                 }
9096         }
9097
9098         if (!crt)
9099                 return;
9100
9101         if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp))
9102                 intel_release_load_detect_pipe(crt, &load_detect_temp);
9103
9104
9105 }
9106
9107 static bool
9108 intel_check_plane_mapping(struct intel_crtc *crtc)
9109 {
9110         struct drm_device *dev = crtc->base.dev;
9111         struct drm_i915_private *dev_priv = dev->dev_private;
9112         u32 reg, val;
9113
9114         if (INTEL_INFO(dev)->num_pipes == 1)
9115                 return true;
9116
9117         reg = DSPCNTR(!crtc->plane);
9118         val = I915_READ(reg);
9119
9120         if ((val & DISPLAY_PLANE_ENABLE) &&
9121             (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
9122                 return false;
9123
9124         return true;
9125 }
9126
9127 static void intel_sanitize_crtc(struct intel_crtc *crtc)
9128 {
9129         struct drm_device *dev = crtc->base.dev;
9130         struct drm_i915_private *dev_priv = dev->dev_private;
9131         u32 reg;
9132
9133         /* Clear any frame start delays used for debugging left by the BIOS */
9134         reg = PIPECONF(crtc->config.cpu_transcoder);
9135         I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
9136
9137         /* We need to sanitize the plane -> pipe mapping first because this will
9138          * disable the crtc (and hence change the state) if it is wrong. Note
9139          * that gen4+ has a fixed plane -> pipe mapping.  */
9140         if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
9141                 struct intel_connector *connector;
9142                 bool plane;
9143
9144                 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
9145                               crtc->base.base.id);
9146
9147                 /* Pipe has the wrong plane attached and the plane is active.
9148                  * Temporarily change the plane mapping and disable everything
9149                  * ...  */
9150                 plane = crtc->plane;
9151                 crtc->plane = !plane;
9152                 dev_priv->display.crtc_disable(&crtc->base);
9153                 crtc->plane = plane;
9154
9155                 /* ... and break all links. */
9156                 list_for_each_entry(connector, &dev->mode_config.connector_list,
9157                                     base.head) {
9158                         if (connector->encoder->base.crtc != &crtc->base)
9159                                 continue;
9160
9161                         intel_connector_break_all_links(connector);
9162                 }
9163
9164                 WARN_ON(crtc->active);
9165                 crtc->base.enabled = false;
9166         }
9167
9168         if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
9169             crtc->pipe == PIPE_A && !crtc->active) {
9170                 /* BIOS forgot to enable pipe A, this mostly happens after
9171                  * resume. Force-enable the pipe to fix this, the update_dpms
9172                  * call below we restore the pipe to the right state, but leave
9173                  * the required bits on. */
9174                 intel_enable_pipe_a(dev);
9175         }
9176
9177         /* Adjust the state of the output pipe according to whether we
9178          * have active connectors/encoders. */
9179         intel_crtc_update_dpms(&crtc->base);
9180
9181         if (crtc->active != crtc->base.enabled) {
9182                 struct intel_encoder *encoder;
9183
9184                 /* This can happen either due to bugs in the get_hw_state
9185                  * functions or because the pipe is force-enabled due to the
9186                  * pipe A quirk. */
9187                 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
9188                               crtc->base.base.id,
9189                               crtc->base.enabled ? "enabled" : "disabled",
9190                               crtc->active ? "enabled" : "disabled");
9191
9192                 crtc->base.enabled = crtc->active;
9193
9194                 /* Because we only establish the connector -> encoder ->
9195                  * crtc links if something is active, this means the
9196                  * crtc is now deactivated. Break the links. connector
9197                  * -> encoder links are only establish when things are
9198                  *  actually up, hence no need to break them. */
9199                 WARN_ON(crtc->active);
9200
9201                 for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
9202                         WARN_ON(encoder->connectors_active);
9203                         encoder->base.crtc = NULL;
9204                 }
9205         }
9206 }
9207
9208 static void intel_sanitize_encoder(struct intel_encoder *encoder)
9209 {
9210         struct intel_connector *connector;
9211         struct drm_device *dev = encoder->base.dev;
9212
9213         /* We need to check both for a crtc link (meaning that the
9214          * encoder is active and trying to read from a pipe) and the
9215          * pipe itself being active. */
9216         bool has_active_crtc = encoder->base.crtc &&
9217                 to_intel_crtc(encoder->base.crtc)->active;
9218
9219         if (encoder->connectors_active && !has_active_crtc) {
9220                 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
9221                               encoder->base.base.id,
9222                               drm_get_encoder_name(&encoder->base));
9223
9224                 /* Connector is active, but has no active pipe. This is
9225                  * fallout from our resume register restoring. Disable
9226                  * the encoder manually again. */
9227                 if (encoder->base.crtc) {
9228                         DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
9229                                       encoder->base.base.id,
9230                                       drm_get_encoder_name(&encoder->base));
9231                         encoder->disable(encoder);
9232                 }
9233
9234                 /* Inconsistent output/port/pipe state happens presumably due to
9235                  * a bug in one of the get_hw_state functions. Or someplace else
9236                  * in our code, like the register restore mess on resume. Clamp
9237                  * things to off as a safer default. */
9238                 list_for_each_entry(connector,
9239                                     &dev->mode_config.connector_list,
9240                                     base.head) {
9241                         if (connector->encoder != encoder)
9242                                 continue;
9243
9244                         intel_connector_break_all_links(connector);
9245                 }
9246         }
9247         /* Enabled encoders without active connectors will be fixed in
9248          * the crtc fixup. */
9249 }
9250
9251 void i915_redisable_vga(struct drm_device *dev)
9252 {
9253         struct drm_i915_private *dev_priv = dev->dev_private;
9254         u32 vga_reg = i915_vgacntrl_reg(dev);
9255
9256         if (I915_READ(vga_reg) != VGA_DISP_DISABLE) {
9257                 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
9258                 i915_disable_vga(dev);
9259         }
9260 }
9261
9262 /* Scan out the current hw modeset state, sanitizes it and maps it into the drm
9263  * and i915 state tracking structures. */
9264 void intel_modeset_setup_hw_state(struct drm_device *dev,
9265                                   bool force_restore)
9266 {
9267         struct drm_i915_private *dev_priv = dev->dev_private;
9268         enum pipe pipe;
9269         u32 tmp;
9270         struct drm_plane *plane;
9271         struct intel_crtc *crtc;
9272         struct intel_encoder *encoder;
9273         struct intel_connector *connector;
9274
9275         if (HAS_DDI(dev)) {
9276                 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
9277
9278                 if (tmp & TRANS_DDI_FUNC_ENABLE) {
9279                         switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
9280                         case TRANS_DDI_EDP_INPUT_A_ON:
9281                         case TRANS_DDI_EDP_INPUT_A_ONOFF:
9282                                 pipe = PIPE_A;
9283                                 break;
9284                         case TRANS_DDI_EDP_INPUT_B_ONOFF:
9285                                 pipe = PIPE_B;
9286                                 break;
9287                         case TRANS_DDI_EDP_INPUT_C_ONOFF:
9288                                 pipe = PIPE_C;
9289                                 break;
9290                         default:
9291                                 /* A bogus value has been programmed, disable
9292                                  * the transcoder */
9293                                 WARN(1, "Bogus eDP source %08x\n", tmp);
9294                                 intel_ddi_disable_transcoder_func(dev_priv,
9295                                                 TRANSCODER_EDP);
9296                                 goto setup_pipes;
9297                         }
9298
9299                         crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
9300                         crtc->config.cpu_transcoder = TRANSCODER_EDP;
9301
9302                         DRM_DEBUG_KMS("Pipe %c using transcoder EDP\n",
9303                                       pipe_name(pipe));
9304                 }
9305         }
9306
9307 setup_pipes:
9308         list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9309                             base.head) {
9310                 enum transcoder tmp = crtc->config.cpu_transcoder;
9311                 memset(&crtc->config, 0, sizeof(crtc->config));
9312                 crtc->config.cpu_transcoder = tmp;
9313
9314                 crtc->active = dev_priv->display.get_pipe_config(crtc,
9315                                                                  &crtc->config);
9316
9317                 crtc->base.enabled = crtc->active;
9318
9319                 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
9320                               crtc->base.base.id,
9321                               crtc->active ? "enabled" : "disabled");
9322         }
9323
9324         if (HAS_DDI(dev))
9325                 intel_ddi_setup_hw_pll_state(dev);
9326
9327         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9328                             base.head) {
9329                 pipe = 0;
9330
9331                 if (encoder->get_hw_state(encoder, &pipe)) {
9332                         encoder->base.crtc =
9333                                 dev_priv->pipe_to_crtc_mapping[pipe];
9334                 } else {
9335                         encoder->base.crtc = NULL;
9336                 }
9337
9338                 encoder->connectors_active = false;
9339                 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe=%i\n",
9340                               encoder->base.base.id,
9341                               drm_get_encoder_name(&encoder->base),
9342                               encoder->base.crtc ? "enabled" : "disabled",
9343                               pipe);
9344         }
9345
9346         list_for_each_entry(connector, &dev->mode_config.connector_list,
9347                             base.head) {
9348                 if (connector->get_hw_state(connector)) {
9349                         connector->base.dpms = DRM_MODE_DPMS_ON;
9350                         connector->encoder->connectors_active = true;
9351                         connector->base.encoder = &connector->encoder->base;
9352                 } else {
9353                         connector->base.dpms = DRM_MODE_DPMS_OFF;
9354                         connector->base.encoder = NULL;
9355                 }
9356                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
9357                               connector->base.base.id,
9358                               drm_get_connector_name(&connector->base),
9359                               connector->base.encoder ? "enabled" : "disabled");
9360         }
9361
9362         /* HW state is read out, now we need to sanitize this mess. */
9363         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9364                             base.head) {
9365                 intel_sanitize_encoder(encoder);
9366         }
9367
9368         for_each_pipe(pipe) {
9369                 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
9370                 intel_sanitize_crtc(crtc);
9371         }
9372
9373         if (force_restore) {
9374                 /*
9375                  * We need to use raw interfaces for restoring state to avoid
9376                  * checking (bogus) intermediate states.
9377                  */
9378                 for_each_pipe(pipe) {
9379                         struct drm_crtc *crtc =
9380                                 dev_priv->pipe_to_crtc_mapping[pipe];
9381
9382                         __intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
9383                                          crtc->fb);
9384                 }
9385                 list_for_each_entry(plane, &dev->mode_config.plane_list, head)
9386                         intel_plane_restore(plane);
9387
9388                 i915_redisable_vga(dev);
9389         } else {
9390                 intel_modeset_update_staged_output_state(dev);
9391         }
9392
9393         intel_modeset_check_state(dev);
9394
9395         drm_mode_config_reset(dev);
9396 }
9397
9398 void intel_modeset_gem_init(struct drm_device *dev)
9399 {
9400         intel_modeset_init_hw(dev);
9401
9402         intel_setup_overlay(dev);
9403
9404         intel_modeset_setup_hw_state(dev, false);
9405 }
9406
9407 void intel_modeset_cleanup(struct drm_device *dev)
9408 {
9409         struct drm_i915_private *dev_priv = dev->dev_private;
9410         struct drm_crtc *crtc;
9411         struct intel_crtc *intel_crtc;
9412
9413         drm_kms_helper_poll_fini(dev);
9414         mutex_lock(&dev->struct_mutex);
9415
9416         intel_unregister_dsm_handler();
9417
9418
9419         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
9420                 /* Skip inactive CRTCs */
9421                 if (!crtc->fb)
9422                         continue;
9423
9424                 intel_crtc = to_intel_crtc(crtc);
9425                 intel_increase_pllclock(crtc);
9426         }
9427
9428         intel_disable_fbc(dev);
9429
9430         intel_disable_gt_powersave(dev);
9431
9432         ironlake_teardown_rc6(dev);
9433
9434         if (IS_VALLEYVIEW(dev))
9435                 vlv_init_dpio(dev);
9436
9437         mutex_unlock(&dev->struct_mutex);
9438
9439         /* Disable the irq before mode object teardown, for the irq might
9440          * enqueue unpin/hotplug work. */
9441         drm_irq_uninstall(dev);
9442         cancel_work_sync(&dev_priv->hotplug_work);
9443         cancel_work_sync(&dev_priv->rps.work);
9444
9445         /* flush any delayed tasks or pending work */
9446         flush_scheduled_work();
9447
9448         /* destroy backlight, if any, before the connectors */
9449         intel_panel_destroy_backlight(dev);
9450
9451         drm_mode_config_cleanup(dev);
9452
9453         intel_cleanup_overlay(dev);
9454 }
9455
9456 /*
9457  * Return which encoder is currently attached for connector.
9458  */
9459 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
9460 {
9461         return &intel_attached_encoder(connector)->base;
9462 }
9463
9464 void intel_connector_attach_encoder(struct intel_connector *connector,
9465                                     struct intel_encoder *encoder)
9466 {
9467         connector->encoder = encoder;
9468         drm_mode_connector_attach_encoder(&connector->base,
9469                                           &encoder->base);
9470 }
9471
9472 /*
9473  * set vga decode state - true == enable VGA decode
9474  */
9475 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
9476 {
9477         struct drm_i915_private *dev_priv = dev->dev_private;
9478         u16 gmch_ctrl;
9479
9480         pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
9481         if (state)
9482                 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
9483         else
9484                 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
9485         pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
9486         return 0;
9487 }
9488
9489 #ifdef CONFIG_DEBUG_FS
9490 #include <linux/seq_file.h>
9491
9492 struct intel_display_error_state {
9493         struct intel_cursor_error_state {
9494                 u32 control;
9495                 u32 position;
9496                 u32 base;
9497                 u32 size;
9498         } cursor[I915_MAX_PIPES];
9499
9500         struct intel_pipe_error_state {
9501                 u32 conf;
9502                 u32 source;
9503
9504                 u32 htotal;
9505                 u32 hblank;
9506                 u32 hsync;
9507                 u32 vtotal;
9508                 u32 vblank;
9509                 u32 vsync;
9510         } pipe[I915_MAX_PIPES];
9511
9512         struct intel_plane_error_state {
9513                 u32 control;
9514                 u32 stride;
9515                 u32 size;
9516                 u32 pos;
9517                 u32 addr;
9518                 u32 surface;
9519                 u32 tile_offset;
9520         } plane[I915_MAX_PIPES];
9521 };
9522
9523 struct intel_display_error_state *
9524 intel_display_capture_error_state(struct drm_device *dev)
9525 {
9526         drm_i915_private_t *dev_priv = dev->dev_private;
9527         struct intel_display_error_state *error;
9528         enum transcoder cpu_transcoder;
9529         int i;
9530
9531         error = kmalloc(sizeof(*error), GFP_ATOMIC);
9532         if (error == NULL)
9533                 return NULL;
9534
9535         for_each_pipe(i) {
9536                 cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i);
9537
9538                 if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) {
9539                         error->cursor[i].control = I915_READ(CURCNTR(i));
9540                         error->cursor[i].position = I915_READ(CURPOS(i));
9541                         error->cursor[i].base = I915_READ(CURBASE(i));
9542                 } else {
9543                         error->cursor[i].control = I915_READ(CURCNTR_IVB(i));
9544                         error->cursor[i].position = I915_READ(CURPOS_IVB(i));
9545                         error->cursor[i].base = I915_READ(CURBASE_IVB(i));
9546                 }
9547
9548                 error->plane[i].control = I915_READ(DSPCNTR(i));
9549                 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
9550                 if (INTEL_INFO(dev)->gen <= 3) {
9551                         error->plane[i].size = I915_READ(DSPSIZE(i));
9552                         error->plane[i].pos = I915_READ(DSPPOS(i));
9553                 }
9554                 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
9555                         error->plane[i].addr = I915_READ(DSPADDR(i));
9556                 if (INTEL_INFO(dev)->gen >= 4) {
9557                         error->plane[i].surface = I915_READ(DSPSURF(i));
9558                         error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
9559                 }
9560
9561                 error->pipe[i].conf = I915_READ(PIPECONF(cpu_transcoder));
9562                 error->pipe[i].source = I915_READ(PIPESRC(i));
9563                 error->pipe[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
9564                 error->pipe[i].hblank = I915_READ(HBLANK(cpu_transcoder));
9565                 error->pipe[i].hsync = I915_READ(HSYNC(cpu_transcoder));
9566                 error->pipe[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
9567                 error->pipe[i].vblank = I915_READ(VBLANK(cpu_transcoder));
9568                 error->pipe[i].vsync = I915_READ(VSYNC(cpu_transcoder));
9569         }
9570
9571         return error;
9572 }
9573
9574 void
9575 intel_display_print_error_state(struct seq_file *m,
9576                                 struct drm_device *dev,
9577                                 struct intel_display_error_state *error)
9578 {
9579         int i;
9580
9581         seq_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
9582         for_each_pipe(i) {
9583                 seq_printf(m, "Pipe [%d]:\n", i);
9584                 seq_printf(m, "  CONF: %08x\n", error->pipe[i].conf);
9585                 seq_printf(m, "  SRC: %08x\n", error->pipe[i].source);
9586                 seq_printf(m, "  HTOTAL: %08x\n", error->pipe[i].htotal);
9587                 seq_printf(m, "  HBLANK: %08x\n", error->pipe[i].hblank);
9588                 seq_printf(m, "  HSYNC: %08x\n", error->pipe[i].hsync);
9589                 seq_printf(m, "  VTOTAL: %08x\n", error->pipe[i].vtotal);
9590                 seq_printf(m, "  VBLANK: %08x\n", error->pipe[i].vblank);
9591                 seq_printf(m, "  VSYNC: %08x\n", error->pipe[i].vsync);
9592
9593                 seq_printf(m, "Plane [%d]:\n", i);
9594                 seq_printf(m, "  CNTR: %08x\n", error->plane[i].control);
9595                 seq_printf(m, "  STRIDE: %08x\n", error->plane[i].stride);
9596                 if (INTEL_INFO(dev)->gen <= 3) {
9597                         seq_printf(m, "  SIZE: %08x\n", error->plane[i].size);
9598                         seq_printf(m, "  POS: %08x\n", error->plane[i].pos);
9599                 }
9600                 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
9601                         seq_printf(m, "  ADDR: %08x\n", error->plane[i].addr);
9602                 if (INTEL_INFO(dev)->gen >= 4) {
9603                         seq_printf(m, "  SURF: %08x\n", error->plane[i].surface);
9604                         seq_printf(m, "  TILEOFF: %08x\n", error->plane[i].tile_offset);
9605                 }
9606
9607                 seq_printf(m, "Cursor [%d]:\n", i);
9608                 seq_printf(m, "  CNTR: %08x\n", error->cursor[i].control);
9609                 seq_printf(m, "  POS: %08x\n", error->cursor[i].position);
9610                 seq_printf(m, "  BASE: %08x\n", error->cursor[i].base);
9611         }
9612 }
9613 #endif