]> Pileus Git - ~andy/linux/blob - drivers/gpu/drm/i915/dvo.h
drm/nv04/disp: hide all the cruft away in its own little hole
[~andy/linux] / drivers / gpu / drm / i915 / dvo.h
1 /*
2  * Copyright © 2006 Eric Anholt
3  *
4  * Permission to use, copy, modify, distribute, and sell this software and its
5  * documentation for any purpose is hereby granted without fee, provided that
6  * the above copyright notice appear in all copies and that both that copyright
7  * notice and this permission notice appear in supporting documentation, and
8  * that the name of the copyright holders not be used in advertising or
9  * publicity pertaining to distribution of the software without specific,
10  * written prior permission.  The copyright holders make no representations
11  * about the suitability of this software for any purpose.  It is provided "as
12  * is" without express or implied warranty.
13  *
14  * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15  * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16  * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17  * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18  * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20  * OF THIS SOFTWARE.
21  */
22
23 #ifndef _INTEL_DVO_H
24 #define _INTEL_DVO_H
25
26 #include <linux/i2c.h>
27 #include <drm/drmP.h>
28 #include <drm/drm_crtc.h>
29 #include "intel_drv.h"
30
31 struct intel_dvo_device {
32         const char *name;
33         int type;
34         /* DVOA/B/C output register */
35         u32 dvo_reg;
36         /* GPIO register used for i2c bus to control this device */
37         u32 gpio;
38         int slave_addr;
39
40         const struct intel_dvo_dev_ops *dev_ops;
41         void *dev_priv;
42         struct i2c_adapter *i2c_bus;
43 };
44
45 struct intel_dvo_dev_ops {
46         /*
47          * Initialize the device at startup time.
48          * Returns NULL if the device does not exist.
49          */
50         bool (*init)(struct intel_dvo_device *dvo,
51                      struct i2c_adapter *i2cbus);
52
53         /*
54          * Called to allow the output a chance to create properties after the
55          * RandR objects have been created.
56          */
57         void (*create_resources)(struct intel_dvo_device *dvo);
58
59         /*
60          * Turn on/off output.
61          *
62          * Because none of our dvo drivers support an intermediate power levels,
63          * we don't expose this in the interfac.
64          */
65         void (*dpms)(struct intel_dvo_device *dvo, bool enable);
66
67         /*
68          * Callback for testing a video mode for a given output.
69          *
70          * This function should only check for cases where a mode can't
71          * be supported on the output specifically, and not represent
72          * generic CRTC limitations.
73          *
74          * \return MODE_OK if the mode is valid, or another MODE_* otherwise.
75          */
76         int (*mode_valid)(struct intel_dvo_device *dvo,
77                           struct drm_display_mode *mode);
78
79         /*
80          * Callback to adjust the mode to be set in the CRTC.
81          *
82          * This allows an output to adjust the clock or even the entire set of
83          * timings, which is used for panels with fixed timings or for
84          * buses with clock limitations.
85          */
86         bool (*mode_fixup)(struct intel_dvo_device *dvo,
87                            const struct drm_display_mode *mode,
88                            struct drm_display_mode *adjusted_mode);
89
90         /*
91          * Callback for preparing mode changes on an output
92          */
93         void (*prepare)(struct intel_dvo_device *dvo);
94
95         /*
96          * Callback for committing mode changes on an output
97          */
98         void (*commit)(struct intel_dvo_device *dvo);
99
100         /*
101          * Callback for setting up a video mode after fixups have been made.
102          *
103          * This is only called while the output is disabled.  The dpms callback
104          * must be all that's necessary for the output, to turn the output on
105          * after this function is called.
106          */
107         void (*mode_set)(struct intel_dvo_device *dvo,
108                          struct drm_display_mode *mode,
109                          struct drm_display_mode *adjusted_mode);
110
111         /*
112          * Probe for a connected output, and return detect_status.
113          */
114         enum drm_connector_status (*detect)(struct intel_dvo_device *dvo);
115
116         /*
117          * Probe the current hw status, returning true if the connected output
118          * is active.
119          */
120         bool (*get_hw_state)(struct intel_dvo_device *dev);
121
122         /**
123          * Query the device for the modes it provides.
124          *
125          * This function may also update MonInfo, mm_width, and mm_height.
126          *
127          * \return singly-linked list of modes or NULL if no modes found.
128          */
129         struct drm_display_mode *(*get_modes)(struct intel_dvo_device *dvo);
130
131         /**
132          * Clean up driver-specific bits of the output
133          */
134         void (*destroy) (struct intel_dvo_device *dvo);
135
136         /**
137          * Debugging hook to dump device registers to log file
138          */
139         void (*dump_regs)(struct intel_dvo_device *dvo);
140 };
141
142 extern struct intel_dvo_dev_ops sil164_ops;
143 extern struct intel_dvo_dev_ops ch7xxx_ops;
144 extern struct intel_dvo_dev_ops ivch_ops;
145 extern struct intel_dvo_dev_ops tfp410_ops;
146 extern struct intel_dvo_dev_ops ch7017_ops;
147 extern struct intel_dvo_dev_ops ns2501_ops;
148
149 #endif /* _INTEL_DVO_H */