]> Pileus Git - ~andy/linux/blob - drivers/char/ipmi/ipmi_watchdog.c
ipmi-watchdog: BKL pushdown
[~andy/linux] / drivers / char / ipmi / ipmi_watchdog.c
1 /*
2  * ipmi_watchdog.c
3  *
4  * A watchdog timer based upon the IPMI interface.
5  *
6  * Author: MontaVista Software, Inc.
7  *         Corey Minyard <minyard@mvista.com>
8  *         source@mvista.com
9  *
10  * Copyright 2002 MontaVista Software Inc.
11  *
12  *  This program is free software; you can redistribute it and/or modify it
13  *  under the terms of the GNU General Public License as published by the
14  *  Free Software Foundation; either version 2 of the License, or (at your
15  *  option) any later version.
16  *
17  *
18  *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
19  *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
20  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21  *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
23  *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
24  *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
25  *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
26  *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
27  *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28  *
29  *  You should have received a copy of the GNU General Public License along
30  *  with this program; if not, write to the Free Software Foundation, Inc.,
31  *  675 Mass Ave, Cambridge, MA 02139, USA.
32  */
33
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/ipmi.h>
37 #include <linux/ipmi_smi.h>
38 #include <linux/smp_lock.h>
39 #include <linux/watchdog.h>
40 #include <linux/miscdevice.h>
41 #include <linux/init.h>
42 #include <linux/completion.h>
43 #include <linux/kdebug.h>
44 #include <linux/rwsem.h>
45 #include <linux/errno.h>
46 #include <asm/uaccess.h>
47 #include <linux/notifier.h>
48 #include <linux/nmi.h>
49 #include <linux/reboot.h>
50 #include <linux/wait.h>
51 #include <linux/poll.h>
52 #include <linux/string.h>
53 #include <linux/ctype.h>
54 #include <linux/delay.h>
55 #include <asm/atomic.h>
56
57 #ifdef CONFIG_X86
58 /*
59  * This is ugly, but I've determined that x86 is the only architecture
60  * that can reasonably support the IPMI NMI watchdog timeout at this
61  * time.  If another architecture adds this capability somehow, it
62  * will have to be a somewhat different mechanism and I have no idea
63  * how it will work.  So in the unlikely event that another
64  * architecture supports this, we can figure out a good generic
65  * mechanism for it at that time.
66  */
67 #include <asm/kdebug.h>
68 #define HAVE_DIE_NMI
69 #endif
70
71 #define PFX "IPMI Watchdog: "
72
73 /*
74  * The IPMI command/response information for the watchdog timer.
75  */
76
77 /* values for byte 1 of the set command, byte 2 of the get response. */
78 #define WDOG_DONT_LOG           (1 << 7)
79 #define WDOG_DONT_STOP_ON_SET   (1 << 6)
80 #define WDOG_SET_TIMER_USE(byte, use) \
81         byte = ((byte) & 0xf8) | ((use) & 0x7)
82 #define WDOG_GET_TIMER_USE(byte) ((byte) & 0x7)
83 #define WDOG_TIMER_USE_BIOS_FRB2        1
84 #define WDOG_TIMER_USE_BIOS_POST        2
85 #define WDOG_TIMER_USE_OS_LOAD          3
86 #define WDOG_TIMER_USE_SMS_OS           4
87 #define WDOG_TIMER_USE_OEM              5
88
89 /* values for byte 2 of the set command, byte 3 of the get response. */
90 #define WDOG_SET_PRETIMEOUT_ACT(byte, use) \
91         byte = ((byte) & 0x8f) | (((use) & 0x7) << 4)
92 #define WDOG_GET_PRETIMEOUT_ACT(byte) (((byte) >> 4) & 0x7)
93 #define WDOG_PRETIMEOUT_NONE            0
94 #define WDOG_PRETIMEOUT_SMI             1
95 #define WDOG_PRETIMEOUT_NMI             2
96 #define WDOG_PRETIMEOUT_MSG_INT         3
97
98 /* Operations that can be performed on a pretimout. */
99 #define WDOG_PREOP_NONE         0
100 #define WDOG_PREOP_PANIC        1
101 /* Cause data to be available to read.  Doesn't work in NMI mode. */
102 #define WDOG_PREOP_GIVE_DATA    2
103
104 /* Actions to perform on a full timeout. */
105 #define WDOG_SET_TIMEOUT_ACT(byte, use) \
106         byte = ((byte) & 0xf8) | ((use) & 0x7)
107 #define WDOG_GET_TIMEOUT_ACT(byte) ((byte) & 0x7)
108 #define WDOG_TIMEOUT_NONE               0
109 #define WDOG_TIMEOUT_RESET              1
110 #define WDOG_TIMEOUT_POWER_DOWN         2
111 #define WDOG_TIMEOUT_POWER_CYCLE        3
112
113 /*
114  * Byte 3 of the get command, byte 4 of the get response is the
115  * pre-timeout in seconds.
116  */
117
118 /* Bits for setting byte 4 of the set command, byte 5 of the get response. */
119 #define WDOG_EXPIRE_CLEAR_BIOS_FRB2     (1 << 1)
120 #define WDOG_EXPIRE_CLEAR_BIOS_POST     (1 << 2)
121 #define WDOG_EXPIRE_CLEAR_OS_LOAD       (1 << 3)
122 #define WDOG_EXPIRE_CLEAR_SMS_OS        (1 << 4)
123 #define WDOG_EXPIRE_CLEAR_OEM           (1 << 5)
124
125 /*
126  * Setting/getting the watchdog timer value.  This is for bytes 5 and
127  * 6 (the timeout time) of the set command, and bytes 6 and 7 (the
128  * timeout time) and 8 and 9 (the current countdown value) of the
129  * response.  The timeout value is given in seconds (in the command it
130  * is 100ms intervals).
131  */
132 #define WDOG_SET_TIMEOUT(byte1, byte2, val) \
133         (byte1) = (((val) * 10) & 0xff), (byte2) = (((val) * 10) >> 8)
134 #define WDOG_GET_TIMEOUT(byte1, byte2) \
135         (((byte1) | ((byte2) << 8)) / 10)
136
137 #define IPMI_WDOG_RESET_TIMER           0x22
138 #define IPMI_WDOG_SET_TIMER             0x24
139 #define IPMI_WDOG_GET_TIMER             0x25
140
141 /* These are here until the real ones get into the watchdog.h interface. */
142 #ifndef WDIOC_GETTIMEOUT
143 #define WDIOC_GETTIMEOUT        _IOW(WATCHDOG_IOCTL_BASE, 20, int)
144 #endif
145 #ifndef WDIOC_SET_PRETIMEOUT
146 #define WDIOC_SET_PRETIMEOUT     _IOW(WATCHDOG_IOCTL_BASE, 21, int)
147 #endif
148 #ifndef WDIOC_GET_PRETIMEOUT
149 #define WDIOC_GET_PRETIMEOUT     _IOW(WATCHDOG_IOCTL_BASE, 22, int)
150 #endif
151
152 static int nowayout = WATCHDOG_NOWAYOUT;
153
154 static ipmi_user_t watchdog_user;
155 static int watchdog_ifnum;
156
157 /* Default the timeout to 10 seconds. */
158 static int timeout = 10;
159
160 /* The pre-timeout is disabled by default. */
161 static int pretimeout;
162
163 /* Default action is to reset the board on a timeout. */
164 static unsigned char action_val = WDOG_TIMEOUT_RESET;
165
166 static char action[16] = "reset";
167
168 static unsigned char preaction_val = WDOG_PRETIMEOUT_NONE;
169
170 static char preaction[16] = "pre_none";
171
172 static unsigned char preop_val = WDOG_PREOP_NONE;
173
174 static char preop[16] = "preop_none";
175 static DEFINE_SPINLOCK(ipmi_read_lock);
176 static char data_to_read;
177 static DECLARE_WAIT_QUEUE_HEAD(read_q);
178 static struct fasync_struct *fasync_q;
179 static char pretimeout_since_last_heartbeat;
180 static char expect_close;
181
182 static int ifnum_to_use = -1;
183
184 /* Parameters to ipmi_set_timeout */
185 #define IPMI_SET_TIMEOUT_NO_HB                  0
186 #define IPMI_SET_TIMEOUT_HB_IF_NECESSARY        1
187 #define IPMI_SET_TIMEOUT_FORCE_HB               2
188
189 static int ipmi_set_timeout(int do_heartbeat);
190 static void ipmi_register_watchdog(int ipmi_intf);
191 static void ipmi_unregister_watchdog(int ipmi_intf);
192
193 /*
194  * If true, the driver will start running as soon as it is configured
195  * and ready.
196  */
197 static int start_now;
198
199 static int set_param_int(const char *val, struct kernel_param *kp)
200 {
201         char *endp;
202         int  l;
203         int  rv = 0;
204
205         if (!val)
206                 return -EINVAL;
207         l = simple_strtoul(val, &endp, 0);
208         if (endp == val)
209                 return -EINVAL;
210
211         *((int *)kp->arg) = l;
212         if (watchdog_user)
213                 rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
214
215         return rv;
216 }
217
218 static int get_param_int(char *buffer, struct kernel_param *kp)
219 {
220         return sprintf(buffer, "%i", *((int *)kp->arg));
221 }
222
223 typedef int (*action_fn)(const char *intval, char *outval);
224
225 static int action_op(const char *inval, char *outval);
226 static int preaction_op(const char *inval, char *outval);
227 static int preop_op(const char *inval, char *outval);
228 static void check_parms(void);
229
230 static int set_param_str(const char *val, struct kernel_param *kp)
231 {
232         action_fn  fn = (action_fn) kp->arg;
233         int        rv = 0;
234         char       valcp[16];
235         char       *s;
236
237         strncpy(valcp, val, 16);
238         valcp[15] = '\0';
239
240         s = strstrip(valcp);
241
242         rv = fn(s, NULL);
243         if (rv)
244                 goto out;
245
246         check_parms();
247         if (watchdog_user)
248                 rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
249
250  out:
251         return rv;
252 }
253
254 static int get_param_str(char *buffer, struct kernel_param *kp)
255 {
256         action_fn fn = (action_fn) kp->arg;
257         int       rv;
258
259         rv = fn(NULL, buffer);
260         if (rv)
261                 return rv;
262         return strlen(buffer);
263 }
264
265
266 static int set_param_wdog_ifnum(const char *val, struct kernel_param *kp)
267 {
268         int rv = param_set_int(val, kp);
269         if (rv)
270                 return rv;
271         if ((ifnum_to_use < 0) || (ifnum_to_use == watchdog_ifnum))
272                 return 0;
273
274         ipmi_unregister_watchdog(watchdog_ifnum);
275         ipmi_register_watchdog(ifnum_to_use);
276         return 0;
277 }
278
279 module_param_call(ifnum_to_use, set_param_wdog_ifnum, get_param_int,
280                   &ifnum_to_use, 0644);
281 MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog "
282                  "timer.  Setting to -1 defaults to the first registered "
283                  "interface");
284
285 module_param_call(timeout, set_param_int, get_param_int, &timeout, 0644);
286 MODULE_PARM_DESC(timeout, "Timeout value in seconds.");
287
288 module_param_call(pretimeout, set_param_int, get_param_int, &pretimeout, 0644);
289 MODULE_PARM_DESC(pretimeout, "Pretimeout value in seconds.");
290
291 module_param_call(action, set_param_str, get_param_str, action_op, 0644);
292 MODULE_PARM_DESC(action, "Timeout action. One of: "
293                  "reset, none, power_cycle, power_off.");
294
295 module_param_call(preaction, set_param_str, get_param_str, preaction_op, 0644);
296 MODULE_PARM_DESC(preaction, "Pretimeout action.  One of: "
297                  "pre_none, pre_smi, pre_nmi, pre_int.");
298
299 module_param_call(preop, set_param_str, get_param_str, preop_op, 0644);
300 MODULE_PARM_DESC(preop, "Pretimeout driver operation.  One of: "
301                  "preop_none, preop_panic, preop_give_data.");
302
303 module_param(start_now, int, 0444);
304 MODULE_PARM_DESC(start_now, "Set to 1 to start the watchdog as"
305                  "soon as the driver is loaded.");
306
307 module_param(nowayout, int, 0644);
308 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
309                  "(default=CONFIG_WATCHDOG_NOWAYOUT)");
310
311 /* Default state of the timer. */
312 static unsigned char ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
313
314 /* If shutting down via IPMI, we ignore the heartbeat. */
315 static int ipmi_ignore_heartbeat;
316
317 /* Is someone using the watchdog?  Only one user is allowed. */
318 static unsigned long ipmi_wdog_open;
319
320 /*
321  * If set to 1, the heartbeat command will set the state to reset and
322  * start the timer.  The timer doesn't normally run when the driver is
323  * first opened until the heartbeat is set the first time, this
324  * variable is used to accomplish this.
325  */
326 static int ipmi_start_timer_on_heartbeat;
327
328 /* IPMI version of the BMC. */
329 static unsigned char ipmi_version_major;
330 static unsigned char ipmi_version_minor;
331
332 /* If a pretimeout occurs, this is used to allow only one panic to happen. */
333 static atomic_t preop_panic_excl = ATOMIC_INIT(-1);
334
335 #ifdef HAVE_DIE_NMI
336 static int testing_nmi;
337 static int nmi_handler_registered;
338 #endif
339
340 static int ipmi_heartbeat(void);
341
342 /*
343  * We use a mutex to make sure that only one thing can send a set
344  * timeout at one time, because we only have one copy of the data.
345  * The mutex is claimed when the set_timeout is sent and freed
346  * when both messages are free.
347  */
348 static atomic_t set_timeout_tofree = ATOMIC_INIT(0);
349 static DEFINE_MUTEX(set_timeout_lock);
350 static DECLARE_COMPLETION(set_timeout_wait);
351 static void set_timeout_free_smi(struct ipmi_smi_msg *msg)
352 {
353     if (atomic_dec_and_test(&set_timeout_tofree))
354             complete(&set_timeout_wait);
355 }
356 static void set_timeout_free_recv(struct ipmi_recv_msg *msg)
357 {
358     if (atomic_dec_and_test(&set_timeout_tofree))
359             complete(&set_timeout_wait);
360 }
361 static struct ipmi_smi_msg set_timeout_smi_msg = {
362         .done = set_timeout_free_smi
363 };
364 static struct ipmi_recv_msg set_timeout_recv_msg = {
365         .done = set_timeout_free_recv
366 };
367
368 static int i_ipmi_set_timeout(struct ipmi_smi_msg  *smi_msg,
369                               struct ipmi_recv_msg *recv_msg,
370                               int                  *send_heartbeat_now)
371 {
372         struct kernel_ipmi_msg            msg;
373         unsigned char                     data[6];
374         int                               rv;
375         struct ipmi_system_interface_addr addr;
376         int                               hbnow = 0;
377
378
379         /* These can be cleared as we are setting the timeout. */
380         pretimeout_since_last_heartbeat = 0;
381
382         data[0] = 0;
383         WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS);
384
385         if ((ipmi_version_major > 1)
386             || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) {
387                 /* This is an IPMI 1.5-only feature. */
388                 data[0] |= WDOG_DONT_STOP_ON_SET;
389         } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
390                 /*
391                  * In ipmi 1.0, setting the timer stops the watchdog, we
392                  * need to start it back up again.
393                  */
394                 hbnow = 1;
395         }
396
397         data[1] = 0;
398         WDOG_SET_TIMEOUT_ACT(data[1], ipmi_watchdog_state);
399         if ((pretimeout > 0) && (ipmi_watchdog_state != WDOG_TIMEOUT_NONE)) {
400             WDOG_SET_PRETIMEOUT_ACT(data[1], preaction_val);
401             data[2] = pretimeout;
402         } else {
403             WDOG_SET_PRETIMEOUT_ACT(data[1], WDOG_PRETIMEOUT_NONE);
404             data[2] = 0; /* No pretimeout. */
405         }
406         data[3] = 0;
407         WDOG_SET_TIMEOUT(data[4], data[5], timeout);
408
409         addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
410         addr.channel = IPMI_BMC_CHANNEL;
411         addr.lun = 0;
412
413         msg.netfn = 0x06;
414         msg.cmd = IPMI_WDOG_SET_TIMER;
415         msg.data = data;
416         msg.data_len = sizeof(data);
417         rv = ipmi_request_supply_msgs(watchdog_user,
418                                       (struct ipmi_addr *) &addr,
419                                       0,
420                                       &msg,
421                                       NULL,
422                                       smi_msg,
423                                       recv_msg,
424                                       1);
425         if (rv) {
426                 printk(KERN_WARNING PFX "set timeout error: %d\n",
427                        rv);
428         }
429
430         if (send_heartbeat_now)
431             *send_heartbeat_now = hbnow;
432
433         return rv;
434 }
435
436 static int ipmi_set_timeout(int do_heartbeat)
437 {
438         int send_heartbeat_now;
439         int rv;
440
441
442         /* We can only send one of these at a time. */
443         mutex_lock(&set_timeout_lock);
444
445         atomic_set(&set_timeout_tofree, 2);
446
447         rv = i_ipmi_set_timeout(&set_timeout_smi_msg,
448                                 &set_timeout_recv_msg,
449                                 &send_heartbeat_now);
450         if (rv) {
451                 mutex_unlock(&set_timeout_lock);
452                 goto out;
453         }
454
455         wait_for_completion(&set_timeout_wait);
456
457         mutex_unlock(&set_timeout_lock);
458
459         if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB)
460             || ((send_heartbeat_now)
461                 && (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY)))
462                 rv = ipmi_heartbeat();
463
464 out:
465         return rv;
466 }
467
468 static atomic_t panic_done_count = ATOMIC_INIT(0);
469
470 static void panic_smi_free(struct ipmi_smi_msg *msg)
471 {
472         atomic_dec(&panic_done_count);
473 }
474 static void panic_recv_free(struct ipmi_recv_msg *msg)
475 {
476         atomic_dec(&panic_done_count);
477 }
478
479 static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg = {
480         .done = panic_smi_free
481 };
482 static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg = {
483         .done = panic_recv_free
484 };
485
486 static void panic_halt_ipmi_heartbeat(void)
487 {
488         struct kernel_ipmi_msg             msg;
489         struct ipmi_system_interface_addr addr;
490         int rv;
491
492         /*
493          * Don't reset the timer if we have the timer turned off, that
494          * re-enables the watchdog.
495          */
496         if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE)
497                 return;
498
499         addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
500         addr.channel = IPMI_BMC_CHANNEL;
501         addr.lun = 0;
502
503         msg.netfn = 0x06;
504         msg.cmd = IPMI_WDOG_RESET_TIMER;
505         msg.data = NULL;
506         msg.data_len = 0;
507         rv = ipmi_request_supply_msgs(watchdog_user,
508                                       (struct ipmi_addr *) &addr,
509                                       0,
510                                       &msg,
511                                       NULL,
512                                       &panic_halt_heartbeat_smi_msg,
513                                       &panic_halt_heartbeat_recv_msg,
514                                       1);
515         if (!rv)
516                 atomic_add(2, &panic_done_count);
517 }
518
519 static struct ipmi_smi_msg panic_halt_smi_msg = {
520         .done = panic_smi_free
521 };
522 static struct ipmi_recv_msg panic_halt_recv_msg = {
523         .done = panic_recv_free
524 };
525
526 /*
527  * Special call, doesn't claim any locks.  This is only to be called
528  * at panic or halt time, in run-to-completion mode, when the caller
529  * is the only CPU and the only thing that will be going is these IPMI
530  * calls.
531  */
532 static void panic_halt_ipmi_set_timeout(void)
533 {
534         int send_heartbeat_now;
535         int rv;
536
537         /* Wait for the messages to be free. */
538         while (atomic_read(&panic_done_count) != 0)
539                 ipmi_poll_interface(watchdog_user);
540         rv = i_ipmi_set_timeout(&panic_halt_smi_msg,
541                                 &panic_halt_recv_msg,
542                                 &send_heartbeat_now);
543         if (!rv) {
544                 atomic_add(2, &panic_done_count);
545                 if (send_heartbeat_now)
546                         panic_halt_ipmi_heartbeat();
547         } else
548                 printk(KERN_WARNING PFX
549                        "Unable to extend the watchdog timeout.");
550         while (atomic_read(&panic_done_count) != 0)
551                 ipmi_poll_interface(watchdog_user);
552 }
553
554 /*
555  * We use a mutex to make sure that only one thing can send a
556  * heartbeat at one time, because we only have one copy of the data.
557  * The semaphore is claimed when the set_timeout is sent and freed
558  * when both messages are free.
559  */
560 static atomic_t heartbeat_tofree = ATOMIC_INIT(0);
561 static DEFINE_MUTEX(heartbeat_lock);
562 static DECLARE_COMPLETION(heartbeat_wait);
563 static void heartbeat_free_smi(struct ipmi_smi_msg *msg)
564 {
565     if (atomic_dec_and_test(&heartbeat_tofree))
566             complete(&heartbeat_wait);
567 }
568 static void heartbeat_free_recv(struct ipmi_recv_msg *msg)
569 {
570     if (atomic_dec_and_test(&heartbeat_tofree))
571             complete(&heartbeat_wait);
572 }
573 static struct ipmi_smi_msg heartbeat_smi_msg = {
574         .done = heartbeat_free_smi
575 };
576 static struct ipmi_recv_msg heartbeat_recv_msg = {
577         .done = heartbeat_free_recv
578 };
579
580 static int ipmi_heartbeat(void)
581 {
582         struct kernel_ipmi_msg            msg;
583         int                               rv;
584         struct ipmi_system_interface_addr addr;
585
586         if (ipmi_ignore_heartbeat)
587                 return 0;
588
589         if (ipmi_start_timer_on_heartbeat) {
590                 ipmi_start_timer_on_heartbeat = 0;
591                 ipmi_watchdog_state = action_val;
592                 return ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
593         } else if (pretimeout_since_last_heartbeat) {
594                 /*
595                  * A pretimeout occurred, make sure we set the timeout.
596                  * We don't want to set the action, though, we want to
597                  * leave that alone (thus it can't be combined with the
598                  * above operation.
599                  */
600                 return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
601         }
602
603         mutex_lock(&heartbeat_lock);
604
605         atomic_set(&heartbeat_tofree, 2);
606
607         /*
608          * Don't reset the timer if we have the timer turned off, that
609          * re-enables the watchdog.
610          */
611         if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) {
612                 mutex_unlock(&heartbeat_lock);
613                 return 0;
614         }
615
616         addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
617         addr.channel = IPMI_BMC_CHANNEL;
618         addr.lun = 0;
619
620         msg.netfn = 0x06;
621         msg.cmd = IPMI_WDOG_RESET_TIMER;
622         msg.data = NULL;
623         msg.data_len = 0;
624         rv = ipmi_request_supply_msgs(watchdog_user,
625                                       (struct ipmi_addr *) &addr,
626                                       0,
627                                       &msg,
628                                       NULL,
629                                       &heartbeat_smi_msg,
630                                       &heartbeat_recv_msg,
631                                       1);
632         if (rv) {
633                 mutex_unlock(&heartbeat_lock);
634                 printk(KERN_WARNING PFX "heartbeat failure: %d\n",
635                        rv);
636                 return rv;
637         }
638
639         /* Wait for the heartbeat to be sent. */
640         wait_for_completion(&heartbeat_wait);
641
642         if (heartbeat_recv_msg.msg.data[0] != 0) {
643                 /*
644                  * Got an error in the heartbeat response.  It was already
645                  * reported in ipmi_wdog_msg_handler, but we should return
646                  * an error here.
647                  */
648                 rv = -EINVAL;
649         }
650
651         mutex_unlock(&heartbeat_lock);
652
653         return rv;
654 }
655
656 static struct watchdog_info ident = {
657         .options        = 0,    /* WDIOF_SETTIMEOUT, */
658         .firmware_version = 1,
659         .identity       = "IPMI"
660 };
661
662 static int ipmi_ioctl(struct inode *inode, struct file *file,
663                       unsigned int cmd, unsigned long arg)
664 {
665         void __user *argp = (void __user *)arg;
666         int i;
667         int val;
668
669         switch (cmd) {
670         case WDIOC_GETSUPPORT:
671                 i = copy_to_user(argp, &ident, sizeof(ident));
672                 return i ? -EFAULT : 0;
673
674         case WDIOC_SETTIMEOUT:
675                 i = copy_from_user(&val, argp, sizeof(int));
676                 if (i)
677                         return -EFAULT;
678                 timeout = val;
679                 return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
680
681         case WDIOC_GETTIMEOUT:
682                 i = copy_to_user(argp, &timeout, sizeof(timeout));
683                 if (i)
684                         return -EFAULT;
685                 return 0;
686
687         case WDIOC_SET_PRETIMEOUT:
688         case WDIOC_SETPRETIMEOUT:
689                 i = copy_from_user(&val, argp, sizeof(int));
690                 if (i)
691                         return -EFAULT;
692                 pretimeout = val;
693                 return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
694
695         case WDIOC_GET_PRETIMEOUT:
696         case WDIOC_GETPRETIMEOUT:
697                 i = copy_to_user(argp, &pretimeout, sizeof(pretimeout));
698                 if (i)
699                         return -EFAULT;
700                 return 0;
701
702         case WDIOC_KEEPALIVE:
703                 return ipmi_heartbeat();
704
705         case WDIOC_SETOPTIONS:
706                 i = copy_from_user(&val, argp, sizeof(int));
707                 if (i)
708                         return -EFAULT;
709                 if (val & WDIOS_DISABLECARD) {
710                         ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
711                         ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
712                         ipmi_start_timer_on_heartbeat = 0;
713                 }
714
715                 if (val & WDIOS_ENABLECARD) {
716                         ipmi_watchdog_state = action_val;
717                         ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
718                 }
719                 return 0;
720
721         case WDIOC_GETSTATUS:
722                 val = 0;
723                 i = copy_to_user(argp, &val, sizeof(val));
724                 if (i)
725                         return -EFAULT;
726                 return 0;
727
728         default:
729                 return -ENOIOCTLCMD;
730         }
731 }
732
733 static ssize_t ipmi_write(struct file *file,
734                           const char  __user *buf,
735                           size_t      len,
736                           loff_t      *ppos)
737 {
738         int rv;
739
740         if (len) {
741                 if (!nowayout) {
742                         size_t i;
743
744                         /* In case it was set long ago */
745                         expect_close = 0;
746
747                         for (i = 0; i != len; i++) {
748                                 char c;
749
750                                 if (get_user(c, buf + i))
751                                         return -EFAULT;
752                                 if (c == 'V')
753                                         expect_close = 42;
754                         }
755                 }
756                 rv = ipmi_heartbeat();
757                 if (rv)
758                         return rv;
759                 return 1;
760         }
761         return 0;
762 }
763
764 static ssize_t ipmi_read(struct file *file,
765                          char        __user *buf,
766                          size_t      count,
767                          loff_t      *ppos)
768 {
769         int          rv = 0;
770         wait_queue_t wait;
771
772         if (count <= 0)
773                 return 0;
774
775         /*
776          * Reading returns if the pretimeout has gone off, and it only does
777          * it once per pretimeout.
778          */
779         spin_lock(&ipmi_read_lock);
780         if (!data_to_read) {
781                 if (file->f_flags & O_NONBLOCK) {
782                         rv = -EAGAIN;
783                         goto out;
784                 }
785
786                 init_waitqueue_entry(&wait, current);
787                 add_wait_queue(&read_q, &wait);
788                 while (!data_to_read) {
789                         set_current_state(TASK_INTERRUPTIBLE);
790                         spin_unlock(&ipmi_read_lock);
791                         schedule();
792                         spin_lock(&ipmi_read_lock);
793                 }
794                 remove_wait_queue(&read_q, &wait);
795
796                 if (signal_pending(current)) {
797                         rv = -ERESTARTSYS;
798                         goto out;
799                 }
800         }
801         data_to_read = 0;
802
803  out:
804         spin_unlock(&ipmi_read_lock);
805
806         if (rv == 0) {
807                 if (copy_to_user(buf, &data_to_read, 1))
808                         rv = -EFAULT;
809                 else
810                         rv = 1;
811         }
812
813         return rv;
814 }
815
816 static int ipmi_open(struct inode *ino, struct file *filep)
817 {
818         switch (iminor(ino)) {
819         case WATCHDOG_MINOR:
820                 if (test_and_set_bit(0, &ipmi_wdog_open))
821                         return -EBUSY;
822
823                 cycle_kernel_lock();
824
825                 /*
826                  * Don't start the timer now, let it start on the
827                  * first heartbeat.
828                  */
829                 ipmi_start_timer_on_heartbeat = 1;
830                 return nonseekable_open(ino, filep);
831
832         default:
833                 return (-ENODEV);
834         }
835 }
836
837 static unsigned int ipmi_poll(struct file *file, poll_table *wait)
838 {
839         unsigned int mask = 0;
840
841         poll_wait(file, &read_q, wait);
842
843         spin_lock(&ipmi_read_lock);
844         if (data_to_read)
845                 mask |= (POLLIN | POLLRDNORM);
846         spin_unlock(&ipmi_read_lock);
847
848         return mask;
849 }
850
851 static int ipmi_fasync(int fd, struct file *file, int on)
852 {
853         int result;
854
855         result = fasync_helper(fd, file, on, &fasync_q);
856
857         return (result);
858 }
859
860 static int ipmi_close(struct inode *ino, struct file *filep)
861 {
862         if (iminor(ino) == WATCHDOG_MINOR) {
863                 if (expect_close == 42) {
864                         ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
865                         ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
866                 } else {
867                         printk(KERN_CRIT PFX
868                                "Unexpected close, not stopping watchdog!\n");
869                         ipmi_heartbeat();
870                 }
871                 clear_bit(0, &ipmi_wdog_open);
872         }
873
874         ipmi_fasync(-1, filep, 0);
875         expect_close = 0;
876
877         return 0;
878 }
879
880 static const struct file_operations ipmi_wdog_fops = {
881         .owner   = THIS_MODULE,
882         .read    = ipmi_read,
883         .poll    = ipmi_poll,
884         .write   = ipmi_write,
885         .ioctl   = ipmi_ioctl,
886         .open    = ipmi_open,
887         .release = ipmi_close,
888         .fasync  = ipmi_fasync,
889 };
890
891 static struct miscdevice ipmi_wdog_miscdev = {
892         .minor          = WATCHDOG_MINOR,
893         .name           = "watchdog",
894         .fops           = &ipmi_wdog_fops
895 };
896
897 static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg,
898                                   void                 *handler_data)
899 {
900         if (msg->msg.data[0] != 0) {
901                 printk(KERN_ERR PFX "response: Error %x on cmd %x\n",
902                        msg->msg.data[0],
903                        msg->msg.cmd);
904         }
905
906         ipmi_free_recv_msg(msg);
907 }
908
909 static void ipmi_wdog_pretimeout_handler(void *handler_data)
910 {
911         if (preaction_val != WDOG_PRETIMEOUT_NONE) {
912                 if (preop_val == WDOG_PREOP_PANIC) {
913                         if (atomic_inc_and_test(&preop_panic_excl))
914                                 panic("Watchdog pre-timeout");
915                 } else if (preop_val == WDOG_PREOP_GIVE_DATA) {
916                         spin_lock(&ipmi_read_lock);
917                         data_to_read = 1;
918                         wake_up_interruptible(&read_q);
919                         kill_fasync(&fasync_q, SIGIO, POLL_IN);
920
921                         spin_unlock(&ipmi_read_lock);
922                 }
923         }
924
925         /*
926          * On some machines, the heartbeat will give an error and not
927          * work unless we re-enable the timer.  So do so.
928          */
929         pretimeout_since_last_heartbeat = 1;
930 }
931
932 static struct ipmi_user_hndl ipmi_hndlrs = {
933         .ipmi_recv_hndl           = ipmi_wdog_msg_handler,
934         .ipmi_watchdog_pretimeout = ipmi_wdog_pretimeout_handler
935 };
936
937 static void ipmi_register_watchdog(int ipmi_intf)
938 {
939         int rv = -EBUSY;
940
941         if (watchdog_user)
942                 goto out;
943
944         if ((ifnum_to_use >= 0) && (ifnum_to_use != ipmi_intf))
945                 goto out;
946
947         watchdog_ifnum = ipmi_intf;
948
949         rv = ipmi_create_user(ipmi_intf, &ipmi_hndlrs, NULL, &watchdog_user);
950         if (rv < 0) {
951                 printk(KERN_CRIT PFX "Unable to register with ipmi\n");
952                 goto out;
953         }
954
955         ipmi_get_version(watchdog_user,
956                          &ipmi_version_major,
957                          &ipmi_version_minor);
958
959         rv = misc_register(&ipmi_wdog_miscdev);
960         if (rv < 0) {
961                 ipmi_destroy_user(watchdog_user);
962                 watchdog_user = NULL;
963                 printk(KERN_CRIT PFX "Unable to register misc device\n");
964         }
965
966 #ifdef HAVE_DIE_NMI
967         if (nmi_handler_registered) {
968                 int old_pretimeout = pretimeout;
969                 int old_timeout = timeout;
970                 int old_preop_val = preop_val;
971
972                 /*
973                  * Set the pretimeout to go off in a second and give
974                  * ourselves plenty of time to stop the timer.
975                  */
976                 ipmi_watchdog_state = WDOG_TIMEOUT_RESET;
977                 preop_val = WDOG_PREOP_NONE; /* Make sure nothing happens */
978                 pretimeout = 99;
979                 timeout = 100;
980
981                 testing_nmi = 1;
982
983                 rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
984                 if (rv) {
985                         printk(KERN_WARNING PFX "Error starting timer to"
986                                " test NMI: 0x%x.  The NMI pretimeout will"
987                                " likely not work\n", rv);
988                         rv = 0;
989                         goto out_restore;
990                 }
991
992                 msleep(1500);
993
994                 if (testing_nmi != 2) {
995                         printk(KERN_WARNING PFX "IPMI NMI didn't seem to"
996                                " occur.  The NMI pretimeout will"
997                                " likely not work\n");
998                 }
999  out_restore:
1000                 testing_nmi = 0;
1001                 preop_val = old_preop_val;
1002                 pretimeout = old_pretimeout;
1003                 timeout = old_timeout;
1004         }
1005 #endif
1006
1007  out:
1008         if ((start_now) && (rv == 0)) {
1009                 /* Run from startup, so start the timer now. */
1010                 start_now = 0; /* Disable this function after first startup. */
1011                 ipmi_watchdog_state = action_val;
1012                 ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
1013                 printk(KERN_INFO PFX "Starting now!\n");
1014         } else {
1015                 /* Stop the timer now. */
1016                 ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
1017                 ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
1018         }
1019 }
1020
1021 static void ipmi_unregister_watchdog(int ipmi_intf)
1022 {
1023         int rv;
1024
1025         if (!watchdog_user)
1026                 goto out;
1027
1028         if (watchdog_ifnum != ipmi_intf)
1029                 goto out;
1030
1031         /* Make sure no one can call us any more. */
1032         misc_deregister(&ipmi_wdog_miscdev);
1033
1034         /*
1035          * Wait to make sure the message makes it out.  The lower layer has
1036          * pointers to our buffers, we want to make sure they are done before
1037          * we release our memory.
1038          */
1039         while (atomic_read(&set_timeout_tofree))
1040                 schedule_timeout_uninterruptible(1);
1041
1042         /* Disconnect from IPMI. */
1043         rv = ipmi_destroy_user(watchdog_user);
1044         if (rv) {
1045                 printk(KERN_WARNING PFX "error unlinking from IPMI: %d\n",
1046                        rv);
1047         }
1048         watchdog_user = NULL;
1049
1050  out:
1051         return;
1052 }
1053
1054 #ifdef HAVE_DIE_NMI
1055 static int
1056 ipmi_nmi(struct notifier_block *self, unsigned long val, void *data)
1057 {
1058         struct die_args *args = data;
1059
1060         if (val != DIE_NMI)
1061                 return NOTIFY_OK;
1062
1063         /* Hack, if it's a memory or I/O error, ignore it. */
1064         if (args->err & 0xc0)
1065                 return NOTIFY_OK;
1066
1067         /*
1068          * If we get here, it's an NMI that's not a memory or I/O
1069          * error.  We can't truly tell if it's from IPMI or not
1070          * without sending a message, and sending a message is almost
1071          * impossible because of locking.
1072          */
1073
1074         if (testing_nmi) {
1075                 testing_nmi = 2;
1076                 return NOTIFY_STOP;
1077         }
1078
1079         /* If we are not expecting a timeout, ignore it. */
1080         if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE)
1081                 return NOTIFY_OK;
1082
1083         if (preaction_val != WDOG_PRETIMEOUT_NMI)
1084                 return NOTIFY_OK;
1085
1086         /*
1087          * If no one else handled the NMI, we assume it was the IPMI
1088          * watchdog.
1089          */
1090         if (preop_val == WDOG_PREOP_PANIC) {
1091                 /* On some machines, the heartbeat will give
1092                    an error and not work unless we re-enable
1093                    the timer.   So do so. */
1094                 pretimeout_since_last_heartbeat = 1;
1095                 if (atomic_inc_and_test(&preop_panic_excl))
1096                         panic(PFX "pre-timeout");
1097         }
1098
1099         return NOTIFY_STOP;
1100 }
1101
1102 static struct notifier_block ipmi_nmi_handler = {
1103         .notifier_call = ipmi_nmi
1104 };
1105 #endif
1106
1107 static int wdog_reboot_handler(struct notifier_block *this,
1108                                unsigned long         code,
1109                                void                  *unused)
1110 {
1111         static int reboot_event_handled;
1112
1113         if ((watchdog_user) && (!reboot_event_handled)) {
1114                 /* Make sure we only do this once. */
1115                 reboot_event_handled = 1;
1116
1117                 if (code == SYS_POWER_OFF || code == SYS_HALT) {
1118                         /* Disable the WDT if we are shutting down. */
1119                         ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
1120                         panic_halt_ipmi_set_timeout();
1121                 } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
1122                         /* Set a long timer to let the reboot happens, but
1123                            reboot if it hangs, but only if the watchdog
1124                            timer was already running. */
1125                         timeout = 120;
1126                         pretimeout = 0;
1127                         ipmi_watchdog_state = WDOG_TIMEOUT_RESET;
1128                         panic_halt_ipmi_set_timeout();
1129                 }
1130         }
1131         return NOTIFY_OK;
1132 }
1133
1134 static struct notifier_block wdog_reboot_notifier = {
1135         .notifier_call  = wdog_reboot_handler,
1136         .next           = NULL,
1137         .priority       = 0
1138 };
1139
1140 static int wdog_panic_handler(struct notifier_block *this,
1141                               unsigned long         event,
1142                               void                  *unused)
1143 {
1144         static int panic_event_handled;
1145
1146         /* On a panic, if we have a panic timeout, make sure to extend
1147            the watchdog timer to a reasonable value to complete the
1148            panic, if the watchdog timer is running.  Plus the
1149            pretimeout is meaningless at panic time. */
1150         if (watchdog_user && !panic_event_handled &&
1151             ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
1152                 /* Make sure we do this only once. */
1153                 panic_event_handled = 1;
1154
1155                 timeout = 255;
1156                 pretimeout = 0;
1157                 panic_halt_ipmi_set_timeout();
1158         }
1159
1160         return NOTIFY_OK;
1161 }
1162
1163 static struct notifier_block wdog_panic_notifier = {
1164         .notifier_call  = wdog_panic_handler,
1165         .next           = NULL,
1166         .priority       = 150   /* priority: INT_MAX >= x >= 0 */
1167 };
1168
1169
1170 static void ipmi_new_smi(int if_num, struct device *device)
1171 {
1172         ipmi_register_watchdog(if_num);
1173 }
1174
1175 static void ipmi_smi_gone(int if_num)
1176 {
1177         ipmi_unregister_watchdog(if_num);
1178 }
1179
1180 static struct ipmi_smi_watcher smi_watcher = {
1181         .owner    = THIS_MODULE,
1182         .new_smi  = ipmi_new_smi,
1183         .smi_gone = ipmi_smi_gone
1184 };
1185
1186 static int action_op(const char *inval, char *outval)
1187 {
1188         if (outval)
1189                 strcpy(outval, action);
1190
1191         if (!inval)
1192                 return 0;
1193
1194         if (strcmp(inval, "reset") == 0)
1195                 action_val = WDOG_TIMEOUT_RESET;
1196         else if (strcmp(inval, "none") == 0)
1197                 action_val = WDOG_TIMEOUT_NONE;
1198         else if (strcmp(inval, "power_cycle") == 0)
1199                 action_val = WDOG_TIMEOUT_POWER_CYCLE;
1200         else if (strcmp(inval, "power_off") == 0)
1201                 action_val = WDOG_TIMEOUT_POWER_DOWN;
1202         else
1203                 return -EINVAL;
1204         strcpy(action, inval);
1205         return 0;
1206 }
1207
1208 static int preaction_op(const char *inval, char *outval)
1209 {
1210         if (outval)
1211                 strcpy(outval, preaction);
1212
1213         if (!inval)
1214                 return 0;
1215
1216         if (strcmp(inval, "pre_none") == 0)
1217                 preaction_val = WDOG_PRETIMEOUT_NONE;
1218         else if (strcmp(inval, "pre_smi") == 0)
1219                 preaction_val = WDOG_PRETIMEOUT_SMI;
1220 #ifdef HAVE_DIE_NMI
1221         else if (strcmp(inval, "pre_nmi") == 0)
1222                 preaction_val = WDOG_PRETIMEOUT_NMI;
1223 #endif
1224         else if (strcmp(inval, "pre_int") == 0)
1225                 preaction_val = WDOG_PRETIMEOUT_MSG_INT;
1226         else
1227                 return -EINVAL;
1228         strcpy(preaction, inval);
1229         return 0;
1230 }
1231
1232 static int preop_op(const char *inval, char *outval)
1233 {
1234         if (outval)
1235                 strcpy(outval, preop);
1236
1237         if (!inval)
1238                 return 0;
1239
1240         if (strcmp(inval, "preop_none") == 0)
1241                 preop_val = WDOG_PREOP_NONE;
1242         else if (strcmp(inval, "preop_panic") == 0)
1243                 preop_val = WDOG_PREOP_PANIC;
1244         else if (strcmp(inval, "preop_give_data") == 0)
1245                 preop_val = WDOG_PREOP_GIVE_DATA;
1246         else
1247                 return -EINVAL;
1248         strcpy(preop, inval);
1249         return 0;
1250 }
1251
1252 static void check_parms(void)
1253 {
1254 #ifdef HAVE_DIE_NMI
1255         int do_nmi = 0;
1256         int rv;
1257
1258         if (preaction_val == WDOG_PRETIMEOUT_NMI) {
1259                 do_nmi = 1;
1260                 if (preop_val == WDOG_PREOP_GIVE_DATA) {
1261                         printk(KERN_WARNING PFX "Pretimeout op is to give data"
1262                                " but NMI pretimeout is enabled, setting"
1263                                " pretimeout op to none\n");
1264                         preop_op("preop_none", NULL);
1265                         do_nmi = 0;
1266                 }
1267         }
1268         if (do_nmi && !nmi_handler_registered) {
1269                 rv = register_die_notifier(&ipmi_nmi_handler);
1270                 if (rv) {
1271                         printk(KERN_WARNING PFX
1272                                "Can't register nmi handler\n");
1273                         return;
1274                 } else
1275                         nmi_handler_registered = 1;
1276         } else if (!do_nmi && nmi_handler_registered) {
1277                 unregister_die_notifier(&ipmi_nmi_handler);
1278                 nmi_handler_registered = 0;
1279         }
1280 #endif
1281 }
1282
1283 static int __init ipmi_wdog_init(void)
1284 {
1285         int rv;
1286
1287         if (action_op(action, NULL)) {
1288                 action_op("reset", NULL);
1289                 printk(KERN_INFO PFX "Unknown action '%s', defaulting to"
1290                        " reset\n", action);
1291         }
1292
1293         if (preaction_op(preaction, NULL)) {
1294                 preaction_op("pre_none", NULL);
1295                 printk(KERN_INFO PFX "Unknown preaction '%s', defaulting to"
1296                        " none\n", preaction);
1297         }
1298
1299         if (preop_op(preop, NULL)) {
1300                 preop_op("preop_none", NULL);
1301                 printk(KERN_INFO PFX "Unknown preop '%s', defaulting to"
1302                        " none\n", preop);
1303         }
1304
1305         check_parms();
1306
1307         register_reboot_notifier(&wdog_reboot_notifier);
1308         atomic_notifier_chain_register(&panic_notifier_list,
1309                         &wdog_panic_notifier);
1310
1311         rv = ipmi_smi_watcher_register(&smi_watcher);
1312         if (rv) {
1313 #ifdef HAVE_DIE_NMI
1314                 if (nmi_handler_registered)
1315                         unregister_die_notifier(&ipmi_nmi_handler);
1316 #endif
1317                 atomic_notifier_chain_unregister(&panic_notifier_list,
1318                                                  &wdog_panic_notifier);
1319                 unregister_reboot_notifier(&wdog_reboot_notifier);
1320                 printk(KERN_WARNING PFX "can't register smi watcher\n");
1321                 return rv;
1322         }
1323
1324         printk(KERN_INFO PFX "driver initialized\n");
1325
1326         return 0;
1327 }
1328
1329 static void __exit ipmi_wdog_exit(void)
1330 {
1331         ipmi_smi_watcher_unregister(&smi_watcher);
1332         ipmi_unregister_watchdog(watchdog_ifnum);
1333
1334 #ifdef HAVE_DIE_NMI
1335         if (nmi_handler_registered)
1336                 unregister_die_notifier(&ipmi_nmi_handler);
1337 #endif
1338
1339         atomic_notifier_chain_unregister(&panic_notifier_list,
1340                                          &wdog_panic_notifier);
1341         unregister_reboot_notifier(&wdog_reboot_notifier);
1342 }
1343 module_exit(ipmi_wdog_exit);
1344 module_init(ipmi_wdog_init);
1345 MODULE_LICENSE("GPL");
1346 MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
1347 MODULE_DESCRIPTION("watchdog timer based upon the IPMI interface.");