2 * acpi_thermal.c - ACPI Thermal Zone Driver ($Revision: 41 $)
4 * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
5 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
7 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or (at
12 * your option) any later version.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
19 * You should have received a copy of the GNU General Public License along
20 * with this program; if not, write to the Free Software Foundation, Inc.,
21 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
23 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
25 * This driver fully implements the ACPI thermal policy as described in the
26 * ACPI 2.0 Specification.
28 * TBD: 1. Implement passive cooling hysteresis.
29 * 2. Enhance passive cooling (CPU) states/limit interface to support
30 * concepts of 'multiple limiters', upper/lower limits, etc.
34 #include <linux/kernel.h>
35 #include <linux/module.h>
36 #include <linux/dmi.h>
37 #include <linux/init.h>
38 #include <linux/slab.h>
39 #include <linux/types.h>
40 #include <linux/jiffies.h>
41 #include <linux/kmod.h>
42 #include <linux/reboot.h>
43 #include <linux/device.h>
44 #include <asm/uaccess.h>
45 #include <linux/thermal.h>
46 #include <acpi/acpi_bus.h>
47 #include <acpi/acpi_drivers.h>
49 #define PREFIX "ACPI: "
51 #define ACPI_THERMAL_CLASS "thermal_zone"
52 #define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
53 #define ACPI_THERMAL_FILE_STATE "state"
54 #define ACPI_THERMAL_FILE_TEMPERATURE "temperature"
55 #define ACPI_THERMAL_FILE_TRIP_POINTS "trip_points"
56 #define ACPI_THERMAL_FILE_COOLING_MODE "cooling_mode"
57 #define ACPI_THERMAL_FILE_POLLING_FREQ "polling_frequency"
58 #define ACPI_THERMAL_NOTIFY_TEMPERATURE 0x80
59 #define ACPI_THERMAL_NOTIFY_THRESHOLDS 0x81
60 #define ACPI_THERMAL_NOTIFY_DEVICES 0x82
61 #define ACPI_THERMAL_NOTIFY_CRITICAL 0xF0
62 #define ACPI_THERMAL_NOTIFY_HOT 0xF1
63 #define ACPI_THERMAL_MODE_ACTIVE 0x00
65 #define ACPI_THERMAL_MAX_ACTIVE 10
66 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
68 #define _COMPONENT ACPI_THERMAL_COMPONENT
69 ACPI_MODULE_NAME("thermal");
71 MODULE_AUTHOR("Paul Diefenbaugh");
72 MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
73 MODULE_LICENSE("GPL");
76 module_param(act, int, 0644);
77 MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
80 module_param(crt, int, 0644);
81 MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
84 module_param(tzp, int, 0444);
85 MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
88 module_param(nocrt, int, 0);
89 MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points.");
92 module_param(off, int, 0);
93 MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.");
96 module_param(psv, int, 0644);
97 MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
99 static int acpi_thermal_add(struct acpi_device *device);
100 static int acpi_thermal_remove(struct acpi_device *device, int type);
101 static int acpi_thermal_resume(struct acpi_device *device);
102 static void acpi_thermal_notify(struct acpi_device *device, u32 event);
104 static const struct acpi_device_id thermal_device_ids[] = {
105 {ACPI_THERMAL_HID, 0},
108 MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
110 static struct acpi_driver acpi_thermal_driver = {
112 .class = ACPI_THERMAL_CLASS,
113 .ids = thermal_device_ids,
115 .add = acpi_thermal_add,
116 .remove = acpi_thermal_remove,
117 .resume = acpi_thermal_resume,
118 .notify = acpi_thermal_notify,
122 struct acpi_thermal_state {
131 struct acpi_thermal_state_flags {
137 struct acpi_thermal_critical {
138 struct acpi_thermal_state_flags flags;
139 unsigned long temperature;
142 struct acpi_thermal_hot {
143 struct acpi_thermal_state_flags flags;
144 unsigned long temperature;
147 struct acpi_thermal_passive {
148 struct acpi_thermal_state_flags flags;
149 unsigned long temperature;
153 struct acpi_handle_list devices;
156 struct acpi_thermal_active {
157 struct acpi_thermal_state_flags flags;
158 unsigned long temperature;
159 struct acpi_handle_list devices;
162 struct acpi_thermal_trips {
163 struct acpi_thermal_critical critical;
164 struct acpi_thermal_hot hot;
165 struct acpi_thermal_passive passive;
166 struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE];
169 struct acpi_thermal_flags {
170 u8 cooling_mode:1; /* _SCP */
171 u8 devices:1; /* _TZD */
175 struct acpi_thermal {
176 struct acpi_device * device;
178 unsigned long temperature;
179 unsigned long last_temperature;
180 unsigned long polling_frequency;
182 struct acpi_thermal_flags flags;
183 struct acpi_thermal_state state;
184 struct acpi_thermal_trips trips;
185 struct acpi_handle_list devices;
186 struct thermal_zone_device *thermal_zone;
192 /* --------------------------------------------------------------------------
193 Thermal Zone Management
194 -------------------------------------------------------------------------- */
196 static int acpi_thermal_get_temperature(struct acpi_thermal *tz)
198 acpi_status status = AE_OK;
199 unsigned long long tmp;
204 tz->last_temperature = tz->temperature;
206 status = acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tmp);
207 if (ACPI_FAILURE(status))
210 tz->temperature = tmp;
211 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n",
217 static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz)
219 acpi_status status = AE_OK;
220 unsigned long long tmp;
225 status = acpi_evaluate_integer(tz->device->handle, "_TZP", NULL, &tmp);
226 if (ACPI_FAILURE(status))
229 tz->polling_frequency = tmp;
230 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n",
231 tz->polling_frequency));
236 static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode)
238 acpi_status status = AE_OK;
239 union acpi_object arg0 = { ACPI_TYPE_INTEGER };
240 struct acpi_object_list arg_list = { 1, &arg0 };
241 acpi_handle handle = NULL;
247 status = acpi_get_handle(tz->device->handle, "_SCP", &handle);
248 if (ACPI_FAILURE(status)) {
249 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "_SCP not present\n"));
253 arg0.integer.value = mode;
255 status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
256 if (ACPI_FAILURE(status))
262 #define ACPI_TRIPS_CRITICAL 0x01
263 #define ACPI_TRIPS_HOT 0x02
264 #define ACPI_TRIPS_PASSIVE 0x04
265 #define ACPI_TRIPS_ACTIVE 0x08
266 #define ACPI_TRIPS_DEVICES 0x10
268 #define ACPI_TRIPS_REFRESH_THRESHOLDS (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
269 #define ACPI_TRIPS_REFRESH_DEVICES ACPI_TRIPS_DEVICES
271 #define ACPI_TRIPS_INIT (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \
272 ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \
276 * This exception is thrown out in two cases:
277 * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
278 * when re-evaluating the AML code.
279 * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
280 * We need to re-bind the cooling devices of a thermal zone when this occurs.
282 #define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str) \
284 if (flags != ACPI_TRIPS_INIT) \
285 ACPI_EXCEPTION((AE_INFO, AE_ERROR, \
286 "ACPI thermal trip point %s changed\n" \
287 "Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \
290 static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
292 acpi_status status = AE_OK;
293 unsigned long long tmp;
294 struct acpi_handle_list devices;
298 /* Critical Shutdown */
299 if (flag & ACPI_TRIPS_CRITICAL) {
300 status = acpi_evaluate_integer(tz->device->handle,
302 tz->trips.critical.temperature = tmp;
304 * Treat freezing temperatures as invalid as well; some
305 * BIOSes return really low values and cause reboots at startup.
306 * Below zero (Celsius) values clearly aren't right for sure..
307 * ... so lets discard those as invalid.
309 if (ACPI_FAILURE(status)) {
310 tz->trips.critical.flags.valid = 0;
311 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
312 "No critical threshold\n"));
313 } else if (tmp <= 2732) {
314 printk(KERN_WARNING FW_BUG "Invalid critical threshold "
316 tz->trips.critical.flags.valid = 0;
318 tz->trips.critical.flags.valid = 1;
319 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
320 "Found critical threshold [%lu]\n",
321 tz->trips.critical.temperature));
323 if (tz->trips.critical.flags.valid == 1) {
325 tz->trips.critical.flags.valid = 0;
326 } else if (crt > 0) {
327 unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
329 * Allow override critical threshold
331 if (crt_k > tz->trips.critical.temperature)
332 printk(KERN_WARNING PREFIX
333 "Critical threshold %d C\n", crt);
334 tz->trips.critical.temperature = crt_k;
339 /* Critical Sleep (optional) */
340 if (flag & ACPI_TRIPS_HOT) {
341 status = acpi_evaluate_integer(tz->device->handle,
343 if (ACPI_FAILURE(status)) {
344 tz->trips.hot.flags.valid = 0;
345 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
346 "No hot threshold\n"));
348 tz->trips.hot.temperature = tmp;
349 tz->trips.hot.flags.valid = 1;
350 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
351 "Found hot threshold [%lu]\n",
352 tz->trips.critical.temperature));
356 /* Passive (optional) */
357 if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) ||
358 (flag == ACPI_TRIPS_INIT)) {
359 valid = tz->trips.passive.flags.valid;
362 } else if (psv > 0) {
363 tmp = CELSIUS_TO_KELVIN(psv);
366 status = acpi_evaluate_integer(tz->device->handle,
370 if (ACPI_FAILURE(status))
371 tz->trips.passive.flags.valid = 0;
373 tz->trips.passive.temperature = tmp;
374 tz->trips.passive.flags.valid = 1;
375 if (flag == ACPI_TRIPS_INIT) {
376 status = acpi_evaluate_integer(
377 tz->device->handle, "_TC1",
379 if (ACPI_FAILURE(status))
380 tz->trips.passive.flags.valid = 0;
382 tz->trips.passive.tc1 = tmp;
383 status = acpi_evaluate_integer(
384 tz->device->handle, "_TC2",
386 if (ACPI_FAILURE(status))
387 tz->trips.passive.flags.valid = 0;
389 tz->trips.passive.tc2 = tmp;
390 status = acpi_evaluate_integer(
391 tz->device->handle, "_TSP",
393 if (ACPI_FAILURE(status))
394 tz->trips.passive.flags.valid = 0;
396 tz->trips.passive.tsp = tmp;
400 if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) {
401 memset(&devices, 0, sizeof(struct acpi_handle_list));
402 status = acpi_evaluate_reference(tz->device->handle, "_PSL",
404 if (ACPI_FAILURE(status)) {
405 printk(KERN_WARNING PREFIX
406 "Invalid passive threshold\n");
407 tz->trips.passive.flags.valid = 0;
410 tz->trips.passive.flags.valid = 1;
412 if (memcmp(&tz->trips.passive.devices, &devices,
413 sizeof(struct acpi_handle_list))) {
414 memcpy(&tz->trips.passive.devices, &devices,
415 sizeof(struct acpi_handle_list));
416 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
419 if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
420 if (valid != tz->trips.passive.flags.valid)
421 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
424 /* Active (optional) */
425 for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
426 char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
427 valid = tz->trips.active[i].flags.valid;
430 break; /* disable all active trip points */
432 if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) &&
433 tz->trips.active[i].flags.valid)) {
434 status = acpi_evaluate_integer(tz->device->handle,
436 if (ACPI_FAILURE(status)) {
437 tz->trips.active[i].flags.valid = 0;
443 tz->trips.active[0].temperature =
444 CELSIUS_TO_KELVIN(act);
447 * Don't allow override higher than
448 * the next higher trip point
450 tz->trips.active[i - 1].temperature =
451 (tz->trips.active[i - 2].temperature <
452 CELSIUS_TO_KELVIN(act) ?
453 tz->trips.active[i - 2].temperature :
454 CELSIUS_TO_KELVIN(act));
457 tz->trips.active[i].temperature = tmp;
458 tz->trips.active[i].flags.valid = 1;
463 if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid ) {
464 memset(&devices, 0, sizeof(struct acpi_handle_list));
465 status = acpi_evaluate_reference(tz->device->handle,
466 name, NULL, &devices);
467 if (ACPI_FAILURE(status)) {
468 printk(KERN_WARNING PREFIX
469 "Invalid active%d threshold\n", i);
470 tz->trips.active[i].flags.valid = 0;
473 tz->trips.active[i].flags.valid = 1;
475 if (memcmp(&tz->trips.active[i].devices, &devices,
476 sizeof(struct acpi_handle_list))) {
477 memcpy(&tz->trips.active[i].devices, &devices,
478 sizeof(struct acpi_handle_list));
479 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
482 if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
483 if (valid != tz->trips.active[i].flags.valid)
484 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
486 if (!tz->trips.active[i].flags.valid)
490 if (flag & ACPI_TRIPS_DEVICES) {
491 memset(&devices, 0, sizeof(struct acpi_handle_list));
492 status = acpi_evaluate_reference(tz->device->handle, "_TZD",
494 if (memcmp(&tz->devices, &devices,
495 sizeof(struct acpi_handle_list))) {
496 memcpy(&tz->devices, &devices,
497 sizeof(struct acpi_handle_list));
498 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
505 static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
507 int i, valid, ret = acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
512 valid = tz->trips.critical.flags.valid |
513 tz->trips.hot.flags.valid |
514 tz->trips.passive.flags.valid;
516 for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
517 valid |= tz->trips.active[i].flags.valid;
520 printk(KERN_WARNING FW_BUG "No valid trip found\n");
526 static void acpi_thermal_check(void *data)
528 struct acpi_thermal *tz = data;
530 thermal_zone_device_update(tz->thermal_zone);
533 /* sys I/F for generic thermal sysfs support */
534 #define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100)
536 static int thermal_get_temp(struct thermal_zone_device *thermal,
539 struct acpi_thermal *tz = thermal->devdata;
545 result = acpi_thermal_get_temperature(tz);
549 *temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset);
553 static int thermal_get_mode(struct thermal_zone_device *thermal,
554 enum thermal_device_mode *mode)
556 struct acpi_thermal *tz = thermal->devdata;
561 *mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED :
562 THERMAL_DEVICE_DISABLED;
567 static int thermal_set_mode(struct thermal_zone_device *thermal,
568 enum thermal_device_mode mode)
570 struct acpi_thermal *tz = thermal->devdata;
577 * enable/disable thermal management from ACPI thermal driver
579 if (mode == THERMAL_DEVICE_ENABLED)
581 else if (mode == THERMAL_DEVICE_DISABLED)
586 if (enable != tz->tz_enabled) {
587 tz->tz_enabled = enable;
588 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
589 "%s kernel ACPI thermal control\n",
590 tz->tz_enabled ? "Enable" : "Disable"));
591 acpi_thermal_check(tz);
596 static int thermal_get_trip_type(struct thermal_zone_device *thermal,
597 int trip, enum thermal_trip_type *type)
599 struct acpi_thermal *tz = thermal->devdata;
605 if (tz->trips.critical.flags.valid) {
607 *type = THERMAL_TRIP_CRITICAL;
613 if (tz->trips.hot.flags.valid) {
615 *type = THERMAL_TRIP_HOT;
621 if (tz->trips.passive.flags.valid) {
623 *type = THERMAL_TRIP_PASSIVE;
629 for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
630 tz->trips.active[i].flags.valid; i++) {
632 *type = THERMAL_TRIP_ACTIVE;
641 static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
642 int trip, unsigned long *temp)
644 struct acpi_thermal *tz = thermal->devdata;
650 if (tz->trips.critical.flags.valid) {
652 *temp = KELVIN_TO_MILLICELSIUS(
653 tz->trips.critical.temperature,
660 if (tz->trips.hot.flags.valid) {
662 *temp = KELVIN_TO_MILLICELSIUS(
663 tz->trips.hot.temperature,
670 if (tz->trips.passive.flags.valid) {
672 *temp = KELVIN_TO_MILLICELSIUS(
673 tz->trips.passive.temperature,
680 for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
681 tz->trips.active[i].flags.valid; i++) {
683 *temp = KELVIN_TO_MILLICELSIUS(
684 tz->trips.active[i].temperature,
694 static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
695 unsigned long *temperature) {
696 struct acpi_thermal *tz = thermal->devdata;
698 if (tz->trips.critical.flags.valid) {
699 *temperature = KELVIN_TO_MILLICELSIUS(
700 tz->trips.critical.temperature,
707 static int thermal_notify(struct thermal_zone_device *thermal, int trip,
708 enum thermal_trip_type trip_type)
711 struct acpi_thermal *tz = thermal->devdata;
713 if (trip_type == THERMAL_TRIP_CRITICAL)
714 type = ACPI_THERMAL_NOTIFY_CRITICAL;
715 else if (trip_type == THERMAL_TRIP_HOT)
716 type = ACPI_THERMAL_NOTIFY_HOT;
720 acpi_bus_generate_proc_event(tz->device, type, 1);
721 acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
722 dev_name(&tz->device->dev), type, 1);
724 if (trip_type == THERMAL_TRIP_CRITICAL && nocrt)
730 typedef int (*cb)(struct thermal_zone_device *, int,
731 struct thermal_cooling_device *);
732 static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
733 struct thermal_cooling_device *cdev,
736 struct acpi_device *device = cdev->devdata;
737 struct acpi_thermal *tz = thermal->devdata;
738 struct acpi_device *dev;
746 if (tz->trips.critical.flags.valid)
749 if (tz->trips.hot.flags.valid)
752 if (tz->trips.passive.flags.valid) {
754 for (i = 0; i < tz->trips.passive.devices.count;
756 handle = tz->trips.passive.devices.handles[i];
757 status = acpi_bus_get_device(handle, &dev);
758 if (ACPI_SUCCESS(status) && (dev == device)) {
759 result = action(thermal, trip, cdev);
766 for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
767 if (!tz->trips.active[i].flags.valid)
771 j < tz->trips.active[i].devices.count;
773 handle = tz->trips.active[i].devices.handles[j];
774 status = acpi_bus_get_device(handle, &dev);
775 if (ACPI_SUCCESS(status) && (dev == device)) {
776 result = action(thermal, trip, cdev);
783 for (i = 0; i < tz->devices.count; i++) {
784 handle = tz->devices.handles[i];
785 status = acpi_bus_get_device(handle, &dev);
786 if (ACPI_SUCCESS(status) && (dev == device)) {
787 result = action(thermal, -1, cdev);
798 acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
799 struct thermal_cooling_device *cdev)
801 return acpi_thermal_cooling_device_cb(thermal, cdev,
802 thermal_zone_bind_cooling_device);
806 acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
807 struct thermal_cooling_device *cdev)
809 return acpi_thermal_cooling_device_cb(thermal, cdev,
810 thermal_zone_unbind_cooling_device);
813 static const struct thermal_zone_device_ops acpi_thermal_zone_ops = {
814 .bind = acpi_thermal_bind_cooling_device,
815 .unbind = acpi_thermal_unbind_cooling_device,
816 .get_temp = thermal_get_temp,
817 .get_mode = thermal_get_mode,
818 .set_mode = thermal_set_mode,
819 .get_trip_type = thermal_get_trip_type,
820 .get_trip_temp = thermal_get_trip_temp,
821 .get_crit_temp = thermal_get_crit_temp,
822 .notify = thermal_notify,
825 static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
832 if (tz->trips.critical.flags.valid)
835 if (tz->trips.hot.flags.valid)
838 if (tz->trips.passive.flags.valid)
841 for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
842 tz->trips.active[i].flags.valid; i++, trips++);
844 if (tz->trips.passive.flags.valid)
846 thermal_zone_device_register("acpitz", trips, 0, tz,
847 &acpi_thermal_zone_ops,
848 tz->trips.passive.tc1,
849 tz->trips.passive.tc2,
850 tz->trips.passive.tsp*100,
851 tz->polling_frequency*100);
854 thermal_zone_device_register("acpitz", trips, 0, tz,
855 &acpi_thermal_zone_ops,
857 tz->polling_frequency*100);
858 if (IS_ERR(tz->thermal_zone))
861 result = sysfs_create_link(&tz->device->dev.kobj,
862 &tz->thermal_zone->device.kobj, "thermal_zone");
866 result = sysfs_create_link(&tz->thermal_zone->device.kobj,
867 &tz->device->dev.kobj, "device");
871 status = acpi_attach_data(tz->device->handle,
872 acpi_bus_private_data_handler,
874 if (ACPI_FAILURE(status)) {
875 printk(KERN_ERR PREFIX
876 "Error attaching device data\n");
882 dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
883 tz->thermal_zone->id);
887 static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz)
889 sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
890 sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
891 thermal_zone_device_unregister(tz->thermal_zone);
892 tz->thermal_zone = NULL;
893 acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler);
897 /* --------------------------------------------------------------------------
899 -------------------------------------------------------------------------- */
901 static void acpi_thermal_notify(struct acpi_device *device, u32 event)
903 struct acpi_thermal *tz = acpi_driver_data(device);
910 case ACPI_THERMAL_NOTIFY_TEMPERATURE:
911 acpi_thermal_check(tz);
913 case ACPI_THERMAL_NOTIFY_THRESHOLDS:
914 acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS);
915 acpi_thermal_check(tz);
916 acpi_bus_generate_proc_event(device, event, 0);
917 acpi_bus_generate_netlink_event(device->pnp.device_class,
918 dev_name(&device->dev), event, 0);
920 case ACPI_THERMAL_NOTIFY_DEVICES:
921 acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
922 acpi_thermal_check(tz);
923 acpi_bus_generate_proc_event(device, event, 0);
924 acpi_bus_generate_netlink_event(device->pnp.device_class,
925 dev_name(&device->dev), event, 0);
928 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
929 "Unsupported event [0x%x]\n", event));
934 static int acpi_thermal_get_info(struct acpi_thermal *tz)
942 /* Get trip points [_CRT, _PSV, etc.] (required) */
943 result = acpi_thermal_get_trip_points(tz);
947 /* Get temperature [_TMP] (required) */
948 result = acpi_thermal_get_temperature(tz);
952 /* Set the cooling mode [_SCP] to active cooling (default) */
953 result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE);
955 tz->flags.cooling_mode = 1;
957 /* Get default polling frequency [_TZP] (optional) */
959 tz->polling_frequency = tzp;
961 acpi_thermal_get_polling_frequency(tz);
967 * The exact offset between Kelvin and degree Celsius is 273.15. However ACPI
968 * handles temperature values with a single decimal place. As a consequence,
969 * some implementations use an offset of 273.1 and others use an offset of
970 * 273.2. Try to find out which one is being used, to present the most
971 * accurate and visually appealing number.
973 * The heuristic below should work for all ACPI thermal zones which have a
974 * critical trip point with a value being a multiple of 0.5 degree Celsius.
976 static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
978 if (tz->trips.critical.flags.valid &&
979 (tz->trips.critical.temperature % 5) == 1)
980 tz->kelvin_offset = 2731;
982 tz->kelvin_offset = 2732;
985 static int acpi_thermal_add(struct acpi_device *device)
988 struct acpi_thermal *tz = NULL;
994 tz = kzalloc(sizeof(struct acpi_thermal), GFP_KERNEL);
999 strcpy(tz->name, device->pnp.bus_id);
1000 strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
1001 strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
1002 device->driver_data = tz;
1003 mutex_init(&tz->lock);
1006 result = acpi_thermal_get_info(tz);
1010 acpi_thermal_guess_offset(tz);
1012 result = acpi_thermal_register_thermal_zone(tz);
1016 printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
1017 acpi_device_name(device), acpi_device_bid(device),
1018 KELVIN_TO_CELSIUS(tz->temperature));
1027 static int acpi_thermal_remove(struct acpi_device *device, int type)
1029 struct acpi_thermal *tz = NULL;
1031 if (!device || !acpi_driver_data(device))
1034 tz = acpi_driver_data(device);
1036 acpi_thermal_unregister_thermal_zone(tz);
1037 mutex_destroy(&tz->lock);
1042 static int acpi_thermal_resume(struct acpi_device *device)
1044 struct acpi_thermal *tz = NULL;
1045 int i, j, power_state, result;
1048 if (!device || !acpi_driver_data(device))
1051 tz = acpi_driver_data(device);
1053 for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
1054 if (!(&tz->trips.active[i]))
1056 if (!tz->trips.active[i].flags.valid)
1058 tz->trips.active[i].flags.enabled = 1;
1059 for (j = 0; j < tz->trips.active[i].devices.count; j++) {
1060 result = acpi_bus_update_power(
1061 tz->trips.active[i].devices.handles[j],
1063 if (result || (power_state != ACPI_STATE_D0)) {
1064 tz->trips.active[i].flags.enabled = 0;
1068 tz->state.active |= tz->trips.active[i].flags.enabled;
1071 acpi_thermal_check(tz);
1076 static int thermal_act(const struct dmi_system_id *d) {
1079 printk(KERN_NOTICE "ACPI: %s detected: "
1080 "disabling all active thermal trip points\n", d->ident);
1085 static int thermal_nocrt(const struct dmi_system_id *d) {
1087 printk(KERN_NOTICE "ACPI: %s detected: "
1088 "disabling all critical thermal trip point actions.\n", d->ident);
1092 static int thermal_tzp(const struct dmi_system_id *d) {
1095 printk(KERN_NOTICE "ACPI: %s detected: "
1096 "enabling thermal zone polling\n", d->ident);
1097 tzp = 300; /* 300 dS = 30 Seconds */
1101 static int thermal_psv(const struct dmi_system_id *d) {
1104 printk(KERN_NOTICE "ACPI: %s detected: "
1105 "disabling all passive thermal trip points\n", d->ident);
1111 static struct dmi_system_id thermal_dmi_table[] __initdata = {
1113 * Award BIOS on this AOpen makes thermal control almost worthless.
1114 * http://bugzilla.kernel.org/show_bug.cgi?id=8842
1117 .callback = thermal_act,
1118 .ident = "AOpen i915GMm-HFS",
1120 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1121 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1125 .callback = thermal_psv,
1126 .ident = "AOpen i915GMm-HFS",
1128 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1129 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1133 .callback = thermal_tzp,
1134 .ident = "AOpen i915GMm-HFS",
1136 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1137 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1141 .callback = thermal_nocrt,
1142 .ident = "Gigabyte GA-7ZX",
1144 DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
1145 DMI_MATCH(DMI_BOARD_NAME, "7ZX"),
1151 static int __init acpi_thermal_init(void)
1155 dmi_check_system(thermal_dmi_table);
1158 printk(KERN_NOTICE "ACPI: thermal control disabled\n");
1162 result = acpi_bus_register_driver(&acpi_thermal_driver);
1169 static void __exit acpi_thermal_exit(void)
1172 acpi_bus_unregister_driver(&acpi_thermal_driver);
1177 module_init(acpi_thermal_init);
1178 module_exit(acpi_thermal_exit);