Pileus Git - ~andy/linux/blob - drivers/acpi/sleep.c

   1 /*
   2  * sleep.c - ACPI sleep support.
   3  *
   4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
   5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
   6  * Copyright (c) 2000-2003 Patrick Mochel
   7  * Copyright (c) 2003 Open Source Development Lab
   8  *
   9  * This file is released under the GPLv2.
  10  *
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/irq.h>
  15 #include <linux/dmi.h>
  16 #include <linux/device.h>
  17 #include <linux/suspend.h>
  18 #include <linux/reboot.h>
  19 #include <linux/acpi.h>
  20 #include <linux/module.h>
  21 #include <linux/pm_runtime.h>
  22
  23 #include <asm/io.h>
  24
  25 #include <acpi/acpi_bus.h>
  26 #include <acpi/acpi_drivers.h>
  27
  28 #include "internal.h"
  29 #include "sleep.h"
  30
  31 u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS;
  32 static unsigned int gts, bfs;
  33 static int set_param_wake_flag(const char *val, struct kernel_param *kp)
  34 {
  35         int ret = param_set_int(val, kp);
  36
  37         if (ret)
  38                 return ret;
  39
  40         if (kp->arg == (const char *)&gts) {
  41                 if (gts)
  42                         wake_sleep_flags |= ACPI_EXECUTE_GTS;
  43                 else
  44                         wake_sleep_flags &= ~ACPI_EXECUTE_GTS;
  45         }
  46         if (kp->arg == (const char *)&bfs) {
  47                 if (bfs)
  48                         wake_sleep_flags |= ACPI_EXECUTE_BFS;
  49                 else
  50                         wake_sleep_flags &= ~ACPI_EXECUTE_BFS;
  51         }
  52         return ret;
  53 }
  54 module_param_call(gts, set_param_wake_flag, param_get_int, &gts, 0644);
  55 module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644);
  56 MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
  57 MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
  58
  59 static u8 sleep_states[ACPI_S_STATE_COUNT];
  60
  61 static void acpi_sleep_tts_switch(u32 acpi_state)
  62 {
  63         union acpi_object in_arg = { ACPI_TYPE_INTEGER };
  64         struct acpi_object_list arg_list = { 1, &in_arg };
  65         acpi_status status = AE_OK;
  66
  67         in_arg.integer.value = acpi_state;
  68         status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
  69         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
  70                 /*
  71                  * OS can't evaluate the _TTS object correctly. Some warning
  72                  * message will be printed. But it won't break anything.
  73                  */
  74                 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
  75         }
  76 }
  77
  78 static int tts_notify_reboot(struct notifier_block *this,
  79                         unsigned long code, void *x)
  80 {
  81         acpi_sleep_tts_switch(ACPI_STATE_S5);
  82         return NOTIFY_DONE;
  83 }
  84
  85 static struct notifier_block tts_notifier = {
  86         .notifier_call  = tts_notify_reboot,
  87         .next           = NULL,
  88         .priority       = 0,
  89 };
  90
  91 static int acpi_sleep_prepare(u32 acpi_state)
  92 {
  93 #ifdef CONFIG_ACPI_SLEEP
  94         /* do we have a wakeup address for S2 and S3? */
  95         if (acpi_state == ACPI_STATE_S3) {
  96                 if (!acpi_wakeup_address)
  97                         return -EFAULT;
  98                 acpi_set_firmware_waking_vector(acpi_wakeup_address);
  99
 100         }
 101         ACPI_FLUSH_CPU_CACHE();
 102 #endif
 103         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
 104                 acpi_state);
 105         acpi_enable_wakeup_devices(acpi_state);
 106         acpi_enter_sleep_state_prep(acpi_state);
 107         return 0;
 108 }
 109
 110 #ifdef CONFIG_ACPI_SLEEP
 111 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
 112
 113 /*
 114  * The ACPI specification wants us to save NVS memory regions during hibernation
 115  * and to restore them during the subsequent resume.  Windows does that also for
 116  * suspend to RAM.  However, it is known that this mechanism does not work on
 117  * all machines, so we allow the user to disable it with the help of the
 118  * 'acpi_sleep=nonvs' kernel command line option.
 119  */
 120 static bool nvs_nosave;
 121
 122 void __init acpi_nvs_nosave(void)
 123 {
 124         nvs_nosave = true;
 125 }
 126
 127 /*
 128  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
 129  * user to request that behavior by using the 'acpi_old_suspend_ordering'
 130  * kernel command line option that causes the following variable to be set.
 131  */
 132 static bool old_suspend_ordering;
 133
 134 void __init acpi_old_suspend_ordering(void)
 135 {
 136         old_suspend_ordering = true;
 137 }
 138
 139 /**
 140  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
 141  */
 142 static int acpi_pm_freeze(void)
 143 {
 144         acpi_disable_all_gpes();
 145         acpi_os_wait_events_complete(NULL);
 146         acpi_ec_block_transactions();
 147         return 0;
 148 }
 149
 150 /**
 151  * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
 152  */
 153 static int acpi_pm_pre_suspend(void)
 154 {
 155         acpi_pm_freeze();
 156         return suspend_nvs_save();
 157 }
 158
 159 /**
 160  *      __acpi_pm_prepare - Prepare the platform to enter the target state.
 161  *
 162  *      If necessary, set the firmware waking vector and do arch-specific
 163  *      nastiness to get the wakeup code to the waking vector.
 164  */
 165 static int __acpi_pm_prepare(void)
 166 {
 167         int error = acpi_sleep_prepare(acpi_target_sleep_state);
 168         if (error)
 169                 acpi_target_sleep_state = ACPI_STATE_S0;
 170
 171         return error;
 172 }
 173
 174 /**
 175  *      acpi_pm_prepare - Prepare the platform to enter the target sleep
 176  *              state and disable the GPEs.
 177  */
 178 static int acpi_pm_prepare(void)
 179 {
 180         int error = __acpi_pm_prepare();
 181         if (!error)
 182                 error = acpi_pm_pre_suspend();
 183
 184         return error;
 185 }
 186
 187 /**
 188  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 189  *
 190  *      This is called after we wake back up (or if entering the sleep state
 191  *      failed).
 192  */
 193 static void acpi_pm_finish(void)
 194 {
 195         u32 acpi_state = acpi_target_sleep_state;
 196
 197         acpi_ec_unblock_transactions();
 198         suspend_nvs_free();
 199
 200         if (acpi_state == ACPI_STATE_S0)
 201                 return;
 202
 203         printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
 204                 acpi_state);
 205         acpi_disable_wakeup_devices(acpi_state);
 206         acpi_leave_sleep_state(acpi_state);
 207
 208         /* reset firmware waking vector */
 209         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 210
 211         acpi_target_sleep_state = ACPI_STATE_S0;
 212 }
 213
 214 /**
 215  *      acpi_pm_end - Finish up suspend sequence.
 216  */
 217 static void acpi_pm_end(void)
 218 {
 219         /*
 220          * This is necessary in case acpi_pm_finish() is not called during a
 221          * failing transition to a sleep state.
 222          */
 223         acpi_target_sleep_state = ACPI_STATE_S0;
 224         acpi_sleep_tts_switch(acpi_target_sleep_state);
 225 }
 226 #else /* !CONFIG_ACPI_SLEEP */
 227 #define acpi_target_sleep_state ACPI_STATE_S0
 228 #endif /* CONFIG_ACPI_SLEEP */
 229
 230 #ifdef CONFIG_SUSPEND
 231 static u32 acpi_suspend_states[] = {
 232         [PM_SUSPEND_ON] = ACPI_STATE_S0,
 233         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
 234         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
 235         [PM_SUSPEND_MAX] = ACPI_STATE_S5
 236 };
 237
 238 /**
 239  *      acpi_suspend_begin - Set the target system sleep state to the state
 240  *              associated with given @pm_state, if supported.
 241  */
 242 static int acpi_suspend_begin(suspend_state_t pm_state)
 243 {
 244         u32 acpi_state = acpi_suspend_states[pm_state];
 245         int error = 0;
 246
 247         error = nvs_nosave ? 0 : suspend_nvs_alloc();
 248         if (error)
 249                 return error;
 250
 251         if (sleep_states[acpi_state]) {
 252                 acpi_target_sleep_state = acpi_state;
 253                 acpi_sleep_tts_switch(acpi_target_sleep_state);
 254         } else {
 255                 printk(KERN_ERR "ACPI does not support this state: %d\n",
 256                         pm_state);
 257                 error = -ENOSYS;
 258         }
 259         return error;
 260 }
 261
 262 /**
 263  *      acpi_suspend_enter - Actually enter a sleep state.
 264  *      @pm_state: ignored
 265  *
 266  *      Flush caches and go to sleep. For STR we have to call arch-specific
 267  *      assembly, which in turn call acpi_enter_sleep_state().
 268  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 269  */
 270 static int acpi_suspend_enter(suspend_state_t pm_state)
 271 {
 272         acpi_status status = AE_OK;
 273         u32 acpi_state = acpi_target_sleep_state;
 274         int error;
 275
 276         ACPI_FLUSH_CPU_CACHE();
 277
 278         switch (acpi_state) {
 279         case ACPI_STATE_S1:
 280                 barrier();
 281                 status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags);
 282                 break;
 283
 284         case ACPI_STATE_S3:
 285                 error = acpi_suspend_lowlevel();
 286                 if (error)
 287                         return error;
 288                 pr_info(PREFIX "Low-level resume complete\n");
 289                 break;
 290         }
 291
 292         /* This violates the spec but is required for bug compatibility. */
 293         acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
 294
 295         /* Reprogram control registers and execute _BFS */
 296         acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags);
 297
 298         /* ACPI 3.0 specs (P62) says that it's the responsibility
 299          * of the OSPM to clear the status bit [ implying that the
 300          * POWER_BUTTON event should not reach userspace ]
 301          */
 302         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
 303                 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
 304
 305         /*
 306          * Disable and clear GPE status before interrupt is enabled. Some GPEs
 307          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
 308          * acpi_leave_sleep_state will reenable specific GPEs later
 309          */
 310         acpi_disable_all_gpes();
 311         /* Allow EC transactions to happen. */
 312         acpi_ec_unblock_transactions_early();
 313
 314         suspend_nvs_restore();
 315
 316         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 317 }
 318
 319 static int acpi_suspend_state_valid(suspend_state_t pm_state)
 320 {
 321         u32 acpi_state;
 322
 323         switch (pm_state) {
 324         case PM_SUSPEND_ON:
 325         case PM_SUSPEND_STANDBY:
 326         case PM_SUSPEND_MEM:
 327                 acpi_state = acpi_suspend_states[pm_state];
 328
 329                 return sleep_states[acpi_state];
 330         default:
 331                 return 0;
 332         }
 333 }
 334
 335 static const struct platform_suspend_ops acpi_suspend_ops = {
 336         .valid = acpi_suspend_state_valid,
 337         .begin = acpi_suspend_begin,
 338         .prepare_late = acpi_pm_prepare,
 339         .enter = acpi_suspend_enter,
 340         .wake = acpi_pm_finish,
 341         .end = acpi_pm_end,
 342 };
 343
 344 /**
 345  *      acpi_suspend_begin_old - Set the target system sleep state to the
 346  *              state associated with given @pm_state, if supported, and
 347  *              execute the _PTS control method.  This function is used if the
 348  *              pre-ACPI 2.0 suspend ordering has been requested.
 349  */
 350 static int acpi_suspend_begin_old(suspend_state_t pm_state)
 351 {
 352         int error = acpi_suspend_begin(pm_state);
 353         if (!error)
 354                 error = __acpi_pm_prepare();
 355
 356         return error;
 357 }
 358
 359 /*
 360  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 361  * been requested.
 362  */
 363 static const struct platform_suspend_ops acpi_suspend_ops_old = {
 364         .valid = acpi_suspend_state_valid,
 365         .begin = acpi_suspend_begin_old,
 366         .prepare_late = acpi_pm_pre_suspend,
 367         .enter = acpi_suspend_enter,
 368         .wake = acpi_pm_finish,
 369         .end = acpi_pm_end,
 370         .recover = acpi_pm_finish,
 371 };
 372
 373 static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
 374 {
 375         old_suspend_ordering = true;
 376         return 0;
 377 }
 378
 379 static int __init init_nvs_nosave(const struct dmi_system_id *d)
 380 {
 381         acpi_nvs_nosave();
 382         return 0;
 383 }
 384
 385 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 386         {
 387         .callback = init_old_suspend_ordering,
 388         .ident = "Abit KN9 (nForce4 variant)",
 389         .matches = {
 390                 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
 391                 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
 392                 },
 393         },
 394         {
 395         .callback = init_old_suspend_ordering,
 396         .ident = "HP xw4600 Workstation",
 397         .matches = {
 398                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 399                 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
 400                 },
 401         },
 402         {
 403         .callback = init_old_suspend_ordering,
 404         .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
 405         .matches = {
 406                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
 407                 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
 408                 },
 409         },
 410         {
 411         .callback = init_old_suspend_ordering,
 412         .ident = "Panasonic CF51-2L",
 413         .matches = {
 414                 DMI_MATCH(DMI_BOARD_VENDOR,
 415                                 "Matsushita Electric Industrial Co.,Ltd."),
 416                 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
 417                 },
 418         },
 419         {
 420         .callback = init_nvs_nosave,
 421         .ident = "Sony Vaio VGN-FW21E",
 422         .matches = {
 423                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 424                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
 425                 },
 426         },
 427         {
 428         .callback = init_nvs_nosave,
 429         .ident = "Sony Vaio VPCEB17FX",
 430         .matches = {
 431                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 432                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
 433                 },
 434         },
 435         {
 436         .callback = init_nvs_nosave,
 437         .ident = "Sony Vaio VGN-SR11M",
 438         .matches = {
 439                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 440                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
 441                 },
 442         },
 443         {
 444         .callback = init_nvs_nosave,
 445         .ident = "Everex StepNote Series",
 446         .matches = {
 447                 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
 448                 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
 449                 },
 450         },
 451         {
 452         .callback = init_nvs_nosave,
 453         .ident = "Sony Vaio VPCEB1Z1E",
 454         .matches = {
 455                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 456                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
 457                 },
 458         },
 459         {
 460         .callback = init_nvs_nosave,
 461         .ident = "Sony Vaio VGN-NW130D",
 462         .matches = {
 463                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 464                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
 465                 },
 466         },
 467         {
 468         .callback = init_nvs_nosave,
 469         .ident = "Sony Vaio VPCCW29FX",
 470         .matches = {
 471                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 472                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
 473                 },
 474         },
 475         {
 476         .callback = init_nvs_nosave,
 477         .ident = "Averatec AV1020-ED2",
 478         .matches = {
 479                 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
 480                 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
 481                 },
 482         },
 483         {
 484         .callback = init_old_suspend_ordering,
 485         .ident = "Asus A8N-SLI DELUXE",
 486         .matches = {
 487                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 488                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
 489                 },
 490         },
 491         {
 492         .callback = init_old_suspend_ordering,
 493         .ident = "Asus A8N-SLI Premium",
 494         .matches = {
 495                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 496                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
 497                 },
 498         },
 499         {
 500         .callback = init_nvs_nosave,
 501         .ident = "Sony Vaio VGN-SR26GN_P",
 502         .matches = {
 503                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 504                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
 505                 },
 506         },
 507         {
 508         .callback = init_nvs_nosave,
 509         .ident = "Sony Vaio VGN-FW520F",
 510         .matches = {
 511                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 512                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
 513                 },
 514         },
 515         {
 516         .callback = init_nvs_nosave,
 517         .ident = "Asus K54C",
 518         .matches = {
 519                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 520                 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
 521                 },
 522         },
 523         {
 524         .callback = init_nvs_nosave,
 525         .ident = "Asus K54HR",
 526         .matches = {
 527                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 528                 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 529                 },
 530         },
 531         {},
 532 };
 533 #endif /* CONFIG_SUSPEND */
 534
 535 #ifdef CONFIG_HIBERNATION
 536 static unsigned long s4_hardware_signature;
 537 static struct acpi_table_facs *facs;
 538 static bool nosigcheck;
 539
 540 void __init acpi_no_s4_hw_signature(void)
 541 {
 542         nosigcheck = true;
 543 }
 544
 545 static int acpi_hibernation_begin(void)
 546 {
 547         int error;
 548
 549         error = nvs_nosave ? 0 : suspend_nvs_alloc();
 550         if (!error) {
 551                 acpi_target_sleep_state = ACPI_STATE_S4;
 552                 acpi_sleep_tts_switch(acpi_target_sleep_state);
 553         }
 554
 555         return error;
 556 }
 557
 558 static int acpi_hibernation_enter(void)
 559 {
 560         acpi_status status = AE_OK;
 561
 562         ACPI_FLUSH_CPU_CACHE();
 563
 564         /* This shouldn't return.  If it returns, we have a problem */
 565         status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags);
 566         /* Reprogram control registers and execute _BFS */
 567         acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags);
 568
 569         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 570 }
 571
 572 static void acpi_hibernation_leave(void)
 573 {
 574         /*
 575          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 576          * enable it here.
 577          */
 578         acpi_enable();
 579         /* Reprogram control registers and execute _BFS */
 580         acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags);
 581         /* Check the hardware signature */
 582         if (facs && s4_hardware_signature != facs->hardware_signature) {
 583                 printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
 584                         "cannot resume!\n");
 585                 panic("ACPI S4 hardware signature mismatch");
 586         }
 587         /* Restore the NVS memory area */
 588         suspend_nvs_restore();
 589         /* Allow EC transactions to happen. */
 590         acpi_ec_unblock_transactions_early();
 591 }
 592
 593 static void acpi_pm_thaw(void)
 594 {
 595         acpi_ec_unblock_transactions();
 596         acpi_enable_all_runtime_gpes();
 597 }
 598
 599 static const struct platform_hibernation_ops acpi_hibernation_ops = {
 600         .begin = acpi_hibernation_begin,
 601         .end = acpi_pm_end,
 602         .pre_snapshot = acpi_pm_prepare,
 603         .finish = acpi_pm_finish,
 604         .prepare = acpi_pm_prepare,
 605         .enter = acpi_hibernation_enter,
 606         .leave = acpi_hibernation_leave,
 607         .pre_restore = acpi_pm_freeze,
 608         .restore_cleanup = acpi_pm_thaw,
 609 };
 610
 611 /**
 612  *      acpi_hibernation_begin_old - Set the target system sleep state to
 613  *              ACPI_STATE_S4 and execute the _PTS control method.  This
 614  *              function is used if the pre-ACPI 2.0 suspend ordering has been
 615  *              requested.
 616  */
 617 static int acpi_hibernation_begin_old(void)
 618 {
 619         int error;
 620         /*
 621          * The _TTS object should always be evaluated before the _PTS object.
 622          * When the old_suspended_ordering is true, the _PTS object is
 623          * evaluated in the acpi_sleep_prepare.
 624          */
 625         acpi_sleep_tts_switch(ACPI_STATE_S4);
 626
 627         error = acpi_sleep_prepare(ACPI_STATE_S4);
 628
 629         if (!error) {
 630                 if (!nvs_nosave)
 631                         error = suspend_nvs_alloc();
 632                 if (!error)
 633                         acpi_target_sleep_state = ACPI_STATE_S4;
 634         }
 635         return error;
 636 }
 637
 638 /*
 639  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 640  * been requested.
 641  */
 642 static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
 643         .begin = acpi_hibernation_begin_old,
 644         .end = acpi_pm_end,
 645         .pre_snapshot = acpi_pm_pre_suspend,
 646         .prepare = acpi_pm_freeze,
 647         .finish = acpi_pm_finish,
 648         .enter = acpi_hibernation_enter,
 649         .leave = acpi_hibernation_leave,
 650         .pre_restore = acpi_pm_freeze,
 651         .restore_cleanup = acpi_pm_thaw,
 652         .recover = acpi_pm_finish,
 653 };
 654 #endif /* CONFIG_HIBERNATION */
 655
 656 int acpi_suspend(u32 acpi_state)
 657 {
 658         suspend_state_t states[] = {
 659                 [1] = PM_SUSPEND_STANDBY,
 660                 [3] = PM_SUSPEND_MEM,
 661                 [5] = PM_SUSPEND_MAX
 662         };
 663
 664         if (acpi_state < 6 && states[acpi_state])
 665                 return pm_suspend(states[acpi_state]);
 666         if (acpi_state == 4)
 667                 return hibernate();
 668         return -EINVAL;
 669 }
 670
 671 #ifdef CONFIG_PM
 672 /**
 673  *      acpi_pm_device_sleep_state - return preferred power state of ACPI device
 674  *              in the system sleep state given by %acpi_target_sleep_state
 675  *      @dev: device to examine; its driver model wakeup flags control
 676  *              whether it should be able to wake up the system
 677  *      @d_min_p: used to store the upper limit of allowed states range
 678  *      Return value: preferred power state of the device on success, -ENODEV on
 679  *              failure (ie. if there's no 'struct acpi_device' for @dev)
 680  *
 681  *      Find the lowest power (highest number) ACPI device power state that
 682  *      device @dev can be in while the system is in the sleep state represented
 683  *      by %acpi_target_sleep_state.  If @wake is nonzero, the device should be
 684  *      able to wake up the system from this sleep state.  If @d_min_p is set,
 685  *      the highest power (lowest number) device power state of @dev allowed
 686  *      in this system sleep state is stored at the location pointed to by it.
 687  *
 688  *      The caller must ensure that @dev is valid before using this function.
 689  *      The caller is also responsible for figuring out if the device is
 690  *      supposed to be able to wake up the system and passing this information
 691  *      via @wake.
 692  */
 693
 694 int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
 695 {
 696         acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
 697         struct acpi_device *adev;
 698         char acpi_method[] = "_SxD";
 699         unsigned long long d_min, d_max;
 700
 701         if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
 702                 printk(KERN_DEBUG "ACPI handle has no context!\n");
 703                 return -ENODEV;
 704         }
 705
 706         acpi_method[2] = '0' + acpi_target_sleep_state;
 707         /*
 708          * If the sleep state is S0, we will return D3, but if the device has
 709          * _S0W, we will use the value from _S0W
 710          */
 711         d_min = ACPI_STATE_D0;
 712         d_max = ACPI_STATE_D3;
 713
 714         /*
 715          * If present, _SxD methods return the minimum D-state (highest power
 716          * state) we can use for the corresponding S-states.  Otherwise, the
 717          * minimum D-state is D0 (ACPI 3.x).
 718          *
 719          * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
 720          * provided -- that's our fault recovery, we ignore retval.
 721          */
 722         if (acpi_target_sleep_state > ACPI_STATE_S0)
 723                 acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
 724
 725         /*
 726          * If _PRW says we can wake up the system from the target sleep state,
 727          * the D-state returned by _SxD is sufficient for that (we assume a
 728          * wakeup-aware driver if wake is set).  Still, if _SxW exists
 729          * (ACPI 3.x), it should return the maximum (lowest power) D-state that
 730          * can wake the system.  _S0W may be valid, too.
 731          */
 732         if (acpi_target_sleep_state == ACPI_STATE_S0 ||
 733             (device_may_wakeup(dev) &&
 734              adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
 735                 acpi_status status;
 736
 737                 acpi_method[3] = 'W';
 738                 status = acpi_evaluate_integer(handle, acpi_method, NULL,
 739                                                 &d_max);
 740                 if (ACPI_FAILURE(status)) {
 741                         if (acpi_target_sleep_state != ACPI_STATE_S0 ||
 742                             status != AE_NOT_FOUND)
 743                                 d_max = d_min;
 744                 } else if (d_max < d_min) {
 745                         /* Warn the user of the broken DSDT */
 746                         printk(KERN_WARNING "ACPI: Wrong value from %s\n",
 747                                 acpi_method);
 748                         /* Sanitize it */
 749                         d_min = d_max;
 750                 }
 751         }
 752
 753         if (d_min_p)
 754                 *d_min_p = d_min;
 755         return d_max;
 756 }
 757 #endif /* CONFIG_PM */
 758
 759 #ifdef CONFIG_PM_SLEEP
 760 /**
 761  * acpi_pm_device_run_wake - Enable/disable wake-up for given device.
 762  * @phys_dev: Device to enable/disable the platform to wake-up the system for.
 763  * @enable: Whether enable or disable the wake-up functionality.
 764  *
 765  * Find the ACPI device object corresponding to @pci_dev and try to
 766  * enable/disable the GPE associated with it.
 767  */
 768 int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
 769 {
 770         struct acpi_device *dev;
 771         acpi_handle handle;
 772
 773         if (!device_run_wake(phys_dev))
 774                 return -EINVAL;
 775
 776         handle = DEVICE_ACPI_HANDLE(phys_dev);
 777         if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
 778                 dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
 779                         __func__);
 780                 return -ENODEV;
 781         }
 782
 783         if (enable) {
 784                 acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
 785                 acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
 786         } else {
 787                 acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
 788                 acpi_disable_wakeup_device_power(dev);
 789         }
 790
 791         return 0;
 792 }
 793
 794 /**
 795  *      acpi_pm_device_sleep_wake - enable or disable the system wake-up
 796  *                                  capability of given device
 797  *      @dev: device to handle
 798  *      @enable: 'true' - enable, 'false' - disable the wake-up capability
 799  */
 800 int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
 801 {
 802         acpi_handle handle;
 803         struct acpi_device *adev;
 804         int error;
 805
 806         if (!device_can_wakeup(dev))
 807                 return -EINVAL;
 808
 809         handle = DEVICE_ACPI_HANDLE(dev);
 810         if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
 811                 dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
 812                 return -ENODEV;
 813         }
 814
 815         error = enable ?
 816                 acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
 817                 acpi_disable_wakeup_device_power(adev);
 818         if (!error)
 819                 dev_info(dev, "wake-up capability %s by ACPI\n",
 820                                 enable ? "enabled" : "disabled");
 821
 822         return error;
 823 }
 824 #endif  /* CONFIG_PM_SLEEP */
 825
 826 static void acpi_power_off_prepare(void)
 827 {
 828         /* Prepare to power off the system */
 829         acpi_sleep_prepare(ACPI_STATE_S5);
 830         acpi_disable_all_gpes();
 831 }
 832
 833 static void acpi_power_off(void)
 834 {
 835         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 836         printk(KERN_DEBUG "%s called\n", __func__);
 837         local_irq_disable();
 838         acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags);
 839 }
 840
 841 /*
 842  * ACPI 2.0 created the optional _GTS and _BFS,
 843  * but industry adoption has been neither rapid nor broad.
 844  *
 845  * Linux gets into trouble when it executes poorly validated
 846  * paths through the BIOS, so disable _GTS and _BFS by default,
 847  * but do speak up and offer the option to enable them.
 848  */
 849 static void __init acpi_gts_bfs_check(void)
 850 {
 851         acpi_handle dummy;
 852
 853         if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy)))
 854         {
 855                 printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
 856                 printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
 857                         "please notify linux-acpi@vger.kernel.org\n");
 858         }
 859         if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy)))
 860         {
 861                 printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
 862                 printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
 863                         "please notify linux-acpi@vger.kernel.org\n");
 864         }
 865 }
 866
 867 int __init acpi_sleep_init(void)
 868 {
 869         acpi_status status;
 870         u8 type_a, type_b;
 871 #ifdef CONFIG_SUSPEND
 872         int i = 0;
 873
 874         dmi_check_system(acpisleep_dmi_table);
 875 #endif
 876
 877         if (acpi_disabled)
 878                 return 0;
 879
 880         sleep_states[ACPI_STATE_S0] = 1;
 881         printk(KERN_INFO PREFIX "(supports S0");
 882
 883 #ifdef CONFIG_SUSPEND
 884         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
 885                 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 886                 if (ACPI_SUCCESS(status)) {
 887                         sleep_states[i] = 1;
 888                         printk(KERN_CONT " S%d", i);
 889                 }
 890         }
 891
 892         suspend_set_ops(old_suspend_ordering ?
 893                 &acpi_suspend_ops_old : &acpi_suspend_ops);
 894 #endif
 895
 896 #ifdef CONFIG_HIBERNATION
 897         status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
 898         if (ACPI_SUCCESS(status)) {
 899                 hibernation_set_ops(old_suspend_ordering ?
 900                         &acpi_hibernation_ops_old : &acpi_hibernation_ops);
 901                 sleep_states[ACPI_STATE_S4] = 1;
 902                 printk(KERN_CONT " S4");
 903                 if (!nosigcheck) {
 904                         acpi_get_table(ACPI_SIG_FACS, 1,
 905                                 (struct acpi_table_header **)&facs);
 906                         if (facs)
 907                                 s4_hardware_signature =
 908                                         facs->hardware_signature;
 909                 }
 910         }
 911 #endif
 912         status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 913         if (ACPI_SUCCESS(status)) {
 914                 sleep_states[ACPI_STATE_S5] = 1;
 915                 printk(KERN_CONT " S5");
 916                 pm_power_off_prepare = acpi_power_off_prepare;
 917                 pm_power_off = acpi_power_off;
 918         }
 919         printk(KERN_CONT ")\n");
 920         /*
 921          * Register the tts_notifier to reboot notifier list so that the _TTS
 922          * object can also be evaluated when the system enters S5.
 923          */
 924         register_reboot_notifier(&tts_notifier);
 925         acpi_gts_bfs_check();
 926         return 0;
 927 }