Pileus Git - ~andy/linux/blob - drivers/acpi/acpica/uttrack.c

   1 /******************************************************************************
   2  *
   3  * Module Name: uttrack - Memory allocation tracking routines (debug only)
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2013, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 /*
  45  * These procedures are used for tracking memory leaks in the subsystem, and
  46  * they get compiled out when the ACPI_DBG_TRACK_ALLOCATIONS is not set.
  47  *
  48  * Each memory allocation is tracked via a doubly linked list. Each
  49  * element contains the caller's component, module name, function name, and
  50  * line number. acpi_ut_allocate and acpi_ut_allocate_zeroed call
  51  * acpi_ut_track_allocation to add an element to the list; deletion
  52  * occurs in the body of acpi_ut_free.
  53  */
  54
  55 #include <acpi/acpi.h>
  56 #include "accommon.h"
  57
  58 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
  59
  60 #define _COMPONENT          ACPI_UTILITIES
  61 ACPI_MODULE_NAME("uttrack")
  62
  63 /* Local prototypes */
  64 static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
  65                                                             acpi_debug_mem_block
  66                                                             *allocation);
  67
  68 static acpi_status
  69 acpi_ut_track_allocation(struct acpi_debug_mem_block *address,
  70                          acpi_size size,
  71                          u8 alloc_type,
  72                          u32 component, const char *module, u32 line);
  73
  74 static acpi_status
  75 acpi_ut_remove_allocation(struct acpi_debug_mem_block *address,
  76                           u32 component, const char *module, u32 line);
  77
  78 /*******************************************************************************
  79  *
  80  * FUNCTION:    acpi_ut_create_list
  81  *
  82  * PARAMETERS:  cache_name      - Ascii name for the cache
  83  *              object_size     - Size of each cached object
  84  *              return_cache    - Where the new cache object is returned
  85  *
  86  * RETURN:      Status
  87  *
  88  * DESCRIPTION: Create a local memory list for tracking purposed
  89  *
  90  ******************************************************************************/
  91
  92 acpi_status
  93 acpi_ut_create_list(char *list_name,
  94                     u16 object_size, struct acpi_memory_list **return_cache)
  95 {
  96         struct acpi_memory_list *cache;
  97
  98         cache = acpi_os_allocate(sizeof(struct acpi_memory_list));
  99         if (!cache) {
 100                 return (AE_NO_MEMORY);
 101         }
 102
 103         ACPI_MEMSET(cache, 0, sizeof(struct acpi_memory_list));
 104
 105         cache->list_name = list_name;
 106         cache->object_size = object_size;
 107
 108         *return_cache = cache;
 109         return (AE_OK);
 110 }
 111
 112 /*******************************************************************************
 113  *
 114  * FUNCTION:    acpi_ut_allocate_and_track
 115  *
 116  * PARAMETERS:  size                - Size of the allocation
 117  *              component           - Component type of caller
 118  *              module              - Source file name of caller
 119  *              line                - Line number of caller
 120  *
 121  * RETURN:      Address of the allocated memory on success, NULL on failure.
 122  *
 123  * DESCRIPTION: The subsystem's equivalent of malloc.
 124  *
 125  ******************************************************************************/
 126
 127 void *acpi_ut_allocate_and_track(acpi_size size,
 128                                  u32 component, const char *module, u32 line)
 129 {
 130         struct acpi_debug_mem_block *allocation;
 131         acpi_status status;
 132
 133         /* Check for an inadvertent size of zero bytes */
 134
 135         if (!size) {
 136                 ACPI_WARNING((module, line,
 137                               "Attempt to allocate zero bytes, allocating 1 byte"));
 138                 size = 1;
 139         }
 140
 141         allocation =
 142             acpi_os_allocate(size + sizeof(struct acpi_debug_mem_header));
 143         if (!allocation) {
 144
 145                 /* Report allocation error */
 146
 147                 ACPI_WARNING((module, line,
 148                               "Could not allocate size %u", (u32)size));
 149
 150                 return (NULL);
 151         }
 152
 153         status = acpi_ut_track_allocation(allocation, size,
 154                                           ACPI_MEM_MALLOC, component, module,
 155                                           line);
 156         if (ACPI_FAILURE(status)) {
 157                 acpi_os_free(allocation);
 158                 return (NULL);
 159         }
 160
 161         acpi_gbl_global_list->total_allocated++;
 162         acpi_gbl_global_list->total_size += (u32)size;
 163         acpi_gbl_global_list->current_total_size += (u32)size;
 164         if (acpi_gbl_global_list->current_total_size >
 165             acpi_gbl_global_list->max_occupied) {
 166                 acpi_gbl_global_list->max_occupied =
 167                     acpi_gbl_global_list->current_total_size;
 168         }
 169
 170         return ((void *)&allocation->user_space);
 171 }
 172
 173 /*******************************************************************************
 174  *
 175  * FUNCTION:    acpi_ut_allocate_zeroed_and_track
 176  *
 177  * PARAMETERS:  size                - Size of the allocation
 178  *              component           - Component type of caller
 179  *              module              - Source file name of caller
 180  *              line                - Line number of caller
 181  *
 182  * RETURN:      Address of the allocated memory on success, NULL on failure.
 183  *
 184  * DESCRIPTION: Subsystem equivalent of calloc.
 185  *
 186  ******************************************************************************/
 187
 188 void *acpi_ut_allocate_zeroed_and_track(acpi_size size,
 189                                         u32 component,
 190                                         const char *module, u32 line)
 191 {
 192         struct acpi_debug_mem_block *allocation;
 193         acpi_status status;
 194
 195         /* Check for an inadvertent size of zero bytes */
 196
 197         if (!size) {
 198                 ACPI_WARNING((module, line,
 199                               "Attempt to allocate zero bytes, allocating 1 byte"));
 200                 size = 1;
 201         }
 202
 203         allocation =
 204             acpi_os_allocate_zeroed(size +
 205                                     sizeof(struct acpi_debug_mem_header));
 206         if (!allocation) {
 207
 208                 /* Report allocation error */
 209
 210                 ACPI_ERROR((module, line,
 211                             "Could not allocate size %u", (u32)size));
 212                 return (NULL);
 213         }
 214
 215         status = acpi_ut_track_allocation(allocation, size,
 216                                           ACPI_MEM_CALLOC, component, module,
 217                                           line);
 218         if (ACPI_FAILURE(status)) {
 219                 acpi_os_free(allocation);
 220                 return (NULL);
 221         }
 222
 223         acpi_gbl_global_list->total_allocated++;
 224         acpi_gbl_global_list->total_size += (u32)size;
 225         acpi_gbl_global_list->current_total_size += (u32)size;
 226         if (acpi_gbl_global_list->current_total_size >
 227             acpi_gbl_global_list->max_occupied) {
 228                 acpi_gbl_global_list->max_occupied =
 229                     acpi_gbl_global_list->current_total_size;
 230         }
 231
 232         return ((void *)&allocation->user_space);
 233 }
 234
 235 /*******************************************************************************
 236  *
 237  * FUNCTION:    acpi_ut_free_and_track
 238  *
 239  * PARAMETERS:  allocation          - Address of the memory to deallocate
 240  *              component           - Component type of caller
 241  *              module              - Source file name of caller
 242  *              line                - Line number of caller
 243  *
 244  * RETURN:      None
 245  *
 246  * DESCRIPTION: Frees the memory at Allocation
 247  *
 248  ******************************************************************************/
 249
 250 void
 251 acpi_ut_free_and_track(void *allocation,
 252                        u32 component, const char *module, u32 line)
 253 {
 254         struct acpi_debug_mem_block *debug_block;
 255         acpi_status status;
 256
 257         ACPI_FUNCTION_TRACE_PTR(ut_free, allocation);
 258
 259         if (NULL == allocation) {
 260                 ACPI_ERROR((module, line, "Attempt to delete a NULL address"));
 261
 262                 return_VOID;
 263         }
 264
 265         debug_block = ACPI_CAST_PTR(struct acpi_debug_mem_block,
 266                                     (((char *)allocation) -
 267                                      sizeof(struct acpi_debug_mem_header)));
 268
 269         acpi_gbl_global_list->total_freed++;
 270         acpi_gbl_global_list->current_total_size -= debug_block->size;
 271
 272         status = acpi_ut_remove_allocation(debug_block,
 273                                            component, module, line);
 274         if (ACPI_FAILURE(status)) {
 275                 ACPI_EXCEPTION((AE_INFO, status, "Could not free memory"));
 276         }
 277
 278         acpi_os_free(debug_block);
 279         ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "%p freed\n", allocation));
 280         return_VOID;
 281 }
 282
 283 /*******************************************************************************
 284  *
 285  * FUNCTION:    acpi_ut_find_allocation
 286  *
 287  * PARAMETERS:  allocation              - Address of allocated memory
 288  *
 289  * RETURN:      Three cases:
 290  *              1) List is empty, NULL is returned.
 291  *              2) Element was found. Returns Allocation parameter.
 292  *              3) Element was not found. Returns position where it should be
 293  *                  inserted into the list.
 294  *
 295  * DESCRIPTION: Searches for an element in the global allocation tracking list.
 296  *              If the element is not found, returns the location within the
 297  *              list where the element should be inserted.
 298  *
 299  *              Note: The list is ordered by larger-to-smaller addresses.
 300  *
 301  *              This global list is used to detect memory leaks in ACPICA as
 302  *              well as other issues such as an attempt to release the same
 303  *              internal object more than once. Although expensive as far
 304  *              as cpu time, this list is much more helpful for finding these
 305  *              types of issues than using memory leak detectors outside of
 306  *              the ACPICA code.
 307  *
 308  ******************************************************************************/
 309
 310 static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
 311                                                             acpi_debug_mem_block
 312                                                             *allocation)
 313 {
 314         struct acpi_debug_mem_block *element;
 315
 316         element = acpi_gbl_global_list->list_head;
 317         if (!element) {
 318                 return (NULL);
 319         }
 320
 321         /*
 322          * Search for the address.
 323          *
 324          * Note: List is ordered by larger-to-smaller addresses, on the
 325          * assumption that a new allocation usually has a larger address
 326          * than previous allocations.
 327          */
 328         while (element > allocation) {
 329
 330                 /* Check for end-of-list */
 331
 332                 if (!element->next) {
 333                         return (element);
 334                 }
 335
 336                 element = element->next;
 337         }
 338
 339         if (element == allocation) {
 340                 return (element);
 341         }
 342
 343         return (element->previous);
 344 }
 345
 346 /*******************************************************************************
 347  *
 348  * FUNCTION:    acpi_ut_track_allocation
 349  *
 350  * PARAMETERS:  allocation          - Address of allocated memory
 351  *              size                - Size of the allocation
 352  *              alloc_type          - MEM_MALLOC or MEM_CALLOC
 353  *              component           - Component type of caller
 354  *              module              - Source file name of caller
 355  *              line                - Line number of caller
 356  *
 357  * RETURN:      Status
 358  *
 359  * DESCRIPTION: Inserts an element into the global allocation tracking list.
 360  *
 361  ******************************************************************************/
 362
 363 static acpi_status
 364 acpi_ut_track_allocation(struct acpi_debug_mem_block *allocation,
 365                          acpi_size size,
 366                          u8 alloc_type,
 367                          u32 component, const char *module, u32 line)
 368 {
 369         struct acpi_memory_list *mem_list;
 370         struct acpi_debug_mem_block *element;
 371         acpi_status status = AE_OK;
 372
 373         ACPI_FUNCTION_TRACE_PTR(ut_track_allocation, allocation);
 374
 375         if (acpi_gbl_disable_mem_tracking) {
 376                 return_ACPI_STATUS(AE_OK);
 377         }
 378
 379         mem_list = acpi_gbl_global_list;
 380         status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
 381         if (ACPI_FAILURE(status)) {
 382                 return_ACPI_STATUS(status);
 383         }
 384
 385         /*
 386          * Search the global list for this address to make sure it is not
 387          * already present. This will catch several kinds of problems.
 388          */
 389         element = acpi_ut_find_allocation(allocation);
 390         if (element == allocation) {
 391                 ACPI_ERROR((AE_INFO,
 392                             "UtTrackAllocation: Allocation (%p) already present in global list!",
 393                             allocation));
 394                 goto unlock_and_exit;
 395         }
 396
 397         /* Fill in the instance data */
 398
 399         allocation->size = (u32)size;
 400         allocation->alloc_type = alloc_type;
 401         allocation->component = component;
 402         allocation->line = line;
 403
 404         ACPI_STRNCPY(allocation->module, module, ACPI_MAX_MODULE_NAME);
 405         allocation->module[ACPI_MAX_MODULE_NAME - 1] = 0;
 406
 407         if (!element) {
 408
 409                 /* Insert at list head */
 410
 411                 if (mem_list->list_head) {
 412                         ((struct acpi_debug_mem_block *)(mem_list->list_head))->
 413                             previous = allocation;
 414                 }
 415
 416                 allocation->next = mem_list->list_head;
 417                 allocation->previous = NULL;
 418
 419                 mem_list->list_head = allocation;
 420         } else {
 421                 /* Insert after element */
 422
 423                 allocation->next = element->next;
 424                 allocation->previous = element;
 425
 426                 if (element->next) {
 427                         (element->next)->previous = allocation;
 428                 }
 429
 430                 element->next = allocation;
 431         }
 432
 433 unlock_and_exit:
 434         status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
 435         return_ACPI_STATUS(status);
 436 }
 437
 438 /*******************************************************************************
 439  *
 440  * FUNCTION:    acpi_ut_remove_allocation
 441  *
 442  * PARAMETERS:  allocation          - Address of allocated memory
 443  *              component           - Component type of caller
 444  *              module              - Source file name of caller
 445  *              line                - Line number of caller
 446  *
 447  * RETURN:      Status
 448  *
 449  * DESCRIPTION: Deletes an element from the global allocation tracking list.
 450  *
 451  ******************************************************************************/
 452
 453 static acpi_status
 454 acpi_ut_remove_allocation(struct acpi_debug_mem_block *allocation,
 455                           u32 component, const char *module, u32 line)
 456 {
 457         struct acpi_memory_list *mem_list;
 458         acpi_status status;
 459
 460         ACPI_FUNCTION_NAME(ut_remove_allocation);
 461
 462         if (acpi_gbl_disable_mem_tracking) {
 463                 return (AE_OK);
 464         }
 465
 466         mem_list = acpi_gbl_global_list;
 467         if (NULL == mem_list->list_head) {
 468
 469                 /* No allocations! */
 470
 471                 ACPI_ERROR((module, line,
 472                             "Empty allocation list, nothing to free!"));
 473
 474                 return (AE_OK);
 475         }
 476
 477         status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
 478         if (ACPI_FAILURE(status)) {
 479                 return (status);
 480         }
 481
 482         /* Unlink */
 483
 484         if (allocation->previous) {
 485                 (allocation->previous)->next = allocation->next;
 486         } else {
 487                 mem_list->list_head = allocation->next;
 488         }
 489
 490         if (allocation->next) {
 491                 (allocation->next)->previous = allocation->previous;
 492         }
 493
 494         ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Freeing %p, size 0%X\n",
 495                           &allocation->user_space, allocation->size));
 496
 497         /* Mark the segment as deleted */
 498
 499         ACPI_MEMSET(&allocation->user_space, 0xEA, allocation->size);
 500
 501         status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
 502         return (status);
 503 }
 504
 505 /*******************************************************************************
 506  *
 507  * FUNCTION:    acpi_ut_dump_allocation_info
 508  *
 509  * PARAMETERS:  None
 510  *
 511  * RETURN:      None
 512  *
 513  * DESCRIPTION: Print some info about the outstanding allocations.
 514  *
 515  ******************************************************************************/
 516
 517 void acpi_ut_dump_allocation_info(void)
 518 {
 519 /*
 520         struct acpi_memory_list         *mem_list;
 521 */
 522
 523         ACPI_FUNCTION_TRACE(ut_dump_allocation_info);
 524
 525 /*
 526         ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 527                           ("%30s: %4d (%3d Kb)\n", "Current allocations",
 528                           mem_list->current_count,
 529                           ROUND_UP_TO_1K (mem_list->current_size)));
 530
 531         ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 532                           ("%30s: %4d (%3d Kb)\n", "Max concurrent allocations",
 533                           mem_list->max_concurrent_count,
 534                           ROUND_UP_TO_1K (mem_list->max_concurrent_size)));
 535
 536         ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 537                           ("%30s: %4d (%3d Kb)\n", "Total (all) internal objects",
 538                           running_object_count,
 539                           ROUND_UP_TO_1K (running_object_size)));
 540
 541         ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 542                           ("%30s: %4d (%3d Kb)\n", "Total (all) allocations",
 543                           running_alloc_count,
 544                           ROUND_UP_TO_1K (running_alloc_size)));
 545
 546         ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 547                           ("%30s: %4d (%3d Kb)\n", "Current Nodes",
 548                           acpi_gbl_current_node_count,
 549                           ROUND_UP_TO_1K (acpi_gbl_current_node_size)));
 550
 551         ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 552                           ("%30s: %4d (%3d Kb)\n", "Max Nodes",
 553                           acpi_gbl_max_concurrent_node_count,
 554                           ROUND_UP_TO_1K ((acpi_gbl_max_concurrent_node_count *
 555                                          sizeof (struct acpi_namespace_node)))));
 556 */
 557         return_VOID;
 558 }
 559
 560 /*******************************************************************************
 561  *
 562  * FUNCTION:    acpi_ut_dump_allocations
 563  *
 564  * PARAMETERS:  component           - Component(s) to dump info for.
 565  *              module              - Module to dump info for. NULL means all.
 566  *
 567  * RETURN:      None
 568  *
 569  * DESCRIPTION: Print a list of all outstanding allocations.
 570  *
 571  ******************************************************************************/
 572
 573 void acpi_ut_dump_allocations(u32 component, const char *module)
 574 {
 575         struct acpi_debug_mem_block *element;
 576         union acpi_descriptor *descriptor;
 577         u32 num_outstanding = 0;
 578         u8 descriptor_type;
 579
 580         ACPI_FUNCTION_TRACE(ut_dump_allocations);
 581
 582         if (acpi_gbl_disable_mem_tracking) {
 583                 return_VOID;
 584         }
 585
 586         /*
 587          * Walk the allocation list.
 588          */
 589         if (ACPI_FAILURE(acpi_ut_acquire_mutex(ACPI_MTX_MEMORY))) {
 590                 return_VOID;
 591         }
 592
 593         element = acpi_gbl_global_list->list_head;
 594         while (element) {
 595                 if ((element->component & component) &&
 596                     ((module == NULL)
 597                      || (0 == ACPI_STRCMP(module, element->module)))) {
 598                         descriptor =
 599                             ACPI_CAST_PTR(union acpi_descriptor,
 600                                           &element->user_space);
 601
 602                         if (element->size <
 603                             sizeof(struct acpi_common_descriptor)) {
 604                                 acpi_os_printf("%p Length 0x%04X %9.9s-%u "
 605                                                "[Not a Descriptor - too small]\n",
 606                                                descriptor, element->size,
 607                                                element->module, element->line);
 608                         } else {
 609                                 /* Ignore allocated objects that are in a cache */
 610
 611                                 if (ACPI_GET_DESCRIPTOR_TYPE(descriptor) !=
 612                                     ACPI_DESC_TYPE_CACHED) {
 613                                         acpi_os_printf
 614                                             ("%p Length 0x%04X %9.9s-%u [%s] ",
 615                                              descriptor, element->size,
 616                                              element->module, element->line,
 617                                              acpi_ut_get_descriptor_name
 618                                              (descriptor));
 619
 620                                         /* Validate the descriptor type using Type field and length */
 621
 622                                         descriptor_type = 0;    /* Not a valid descriptor type */
 623
 624                                         switch (ACPI_GET_DESCRIPTOR_TYPE
 625                                                 (descriptor)) {
 626                                         case ACPI_DESC_TYPE_OPERAND:
 627
 628                                                 if (element->size ==
 629                                                     sizeof(union
 630                                                            acpi_operand_object))
 631                                                 {
 632                                                         descriptor_type =
 633                                                             ACPI_DESC_TYPE_OPERAND;
 634                                                 }
 635                                                 break;
 636
 637                                         case ACPI_DESC_TYPE_PARSER:
 638
 639                                                 if (element->size ==
 640                                                     sizeof(union
 641                                                            acpi_parse_object)) {
 642                                                         descriptor_type =
 643                                                             ACPI_DESC_TYPE_PARSER;
 644                                                 }
 645                                                 break;
 646
 647                                         case ACPI_DESC_TYPE_NAMED:
 648
 649                                                 if (element->size ==
 650                                                     sizeof(struct
 651                                                            acpi_namespace_node))
 652                                                 {
 653                                                         descriptor_type =
 654                                                             ACPI_DESC_TYPE_NAMED;
 655                                                 }
 656                                                 break;
 657
 658                                         default:
 659
 660                                                 break;
 661                                         }
 662
 663                                         /* Display additional info for the major descriptor types */
 664
 665                                         switch (descriptor_type) {
 666                                         case ACPI_DESC_TYPE_OPERAND:
 667
 668                                                 acpi_os_printf
 669                                                     ("%12.12s RefCount 0x%04X\n",
 670                                                      acpi_ut_get_type_name
 671                                                      (descriptor->object.common.
 672                                                       type),
 673                                                      descriptor->object.common.
 674                                                      reference_count);
 675                                                 break;
 676
 677                                         case ACPI_DESC_TYPE_PARSER:
 678
 679                                                 acpi_os_printf
 680                                                     ("AmlOpcode 0x%04hX\n",
 681                                                      descriptor->op.asl.
 682                                                      aml_opcode);
 683                                                 break;
 684
 685                                         case ACPI_DESC_TYPE_NAMED:
 686
 687                                                 acpi_os_printf("%4.4s\n",
 688                                                                acpi_ut_get_node_name
 689                                                                (&descriptor->
 690                                                                 node));
 691                                                 break;
 692
 693                                         default:
 694
 695                                                 acpi_os_printf("\n");
 696                                                 break;
 697                                         }
 698                                 }
 699                         }
 700
 701                         num_outstanding++;
 702                 }
 703
 704                 element = element->next;
 705         }
 706
 707         (void)acpi_ut_release_mutex(ACPI_MTX_MEMORY);
 708
 709         /* Print summary */
 710
 711         if (!num_outstanding) {
 712                 ACPI_INFO((AE_INFO, "No outstanding allocations"));
 713         } else {
 714                 ACPI_ERROR((AE_INFO, "%u(0x%X) Outstanding allocations",
 715                             num_outstanding, num_outstanding));
 716         }
 717
 718         return_VOID;
 719 }
 720
 721 #endif                          /* ACPI_DBG_TRACK_ALLOCATIONS */