Pileus Git - ~andy/linux/blob - drivers/acpi/acpica/dswload.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dswload - Dispatcher first pass namespace load callbacks
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2013, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acparser.h"
  47 #include "amlcode.h"
  48 #include "acdispat.h"
  49 #include "acinterp.h"
  50 #include "acnamesp.h"
  51
  52 #ifdef ACPI_ASL_COMPILER
  53 #include "acdisasm.h"
  54 #endif
  55
  56 #define _COMPONENT          ACPI_DISPATCHER
  57 ACPI_MODULE_NAME("dswload")
  58
  59 /*******************************************************************************
  60  *
  61  * FUNCTION:    acpi_ds_init_callbacks
  62  *
  63  * PARAMETERS:  walk_state      - Current state of the parse tree walk
  64  *              pass_number     - 1, 2, or 3
  65  *
  66  * RETURN:      Status
  67  *
  68  * DESCRIPTION: Init walk state callbacks
  69  *
  70  ******************************************************************************/
  71 acpi_status
  72 acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number)
  73 {
  74
  75         switch (pass_number) {
  76         case 1:
  77                 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
  78                     ACPI_PARSE_DELETE_TREE;
  79                 walk_state->descending_callback = acpi_ds_load1_begin_op;
  80                 walk_state->ascending_callback = acpi_ds_load1_end_op;
  81                 break;
  82
  83         case 2:
  84                 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
  85                     ACPI_PARSE_DELETE_TREE;
  86                 walk_state->descending_callback = acpi_ds_load2_begin_op;
  87                 walk_state->ascending_callback = acpi_ds_load2_end_op;
  88                 break;
  89
  90         case 3:
  91 #ifndef ACPI_NO_METHOD_EXECUTION
  92                 walk_state->parse_flags |= ACPI_PARSE_EXECUTE |
  93                     ACPI_PARSE_DELETE_TREE;
  94                 walk_state->descending_callback = acpi_ds_exec_begin_op;
  95                 walk_state->ascending_callback = acpi_ds_exec_end_op;
  96 #endif
  97                 break;
  98
  99         default:
 100                 return (AE_BAD_PARAMETER);
 101         }
 102
 103         return (AE_OK);
 104 }
 105
 106 /*******************************************************************************
 107  *
 108  * FUNCTION:    acpi_ds_load1_begin_op
 109  *
 110  * PARAMETERS:  walk_state      - Current state of the parse tree walk
 111  *              out_op          - Where to return op if a new one is created
 112  *
 113  * RETURN:      Status
 114  *
 115  * DESCRIPTION: Descending callback used during the loading of ACPI tables.
 116  *
 117  ******************************************************************************/
 118
 119 acpi_status
 120 acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 121                        union acpi_parse_object ** out_op)
 122 {
 123         union acpi_parse_object *op;
 124         struct acpi_namespace_node *node;
 125         acpi_status status;
 126         acpi_object_type object_type;
 127         char *path;
 128         u32 flags;
 129
 130         ACPI_FUNCTION_TRACE(ds_load1_begin_op);
 131
 132         op = walk_state->op;
 133         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
 134                           walk_state));
 135
 136         /* We are only interested in opcodes that have an associated name */
 137
 138         if (op) {
 139                 if (!(walk_state->op_info->flags & AML_NAMED)) {
 140                         *out_op = op;
 141                         return_ACPI_STATUS(AE_OK);
 142                 }
 143
 144                 /* Check if this object has already been installed in the namespace */
 145
 146                 if (op->common.node) {
 147                         *out_op = op;
 148                         return_ACPI_STATUS(AE_OK);
 149                 }
 150         }
 151
 152         path = acpi_ps_get_next_namestring(&walk_state->parser_state);
 153
 154         /* Map the raw opcode into an internal object type */
 155
 156         object_type = walk_state->op_info->object_type;
 157
 158         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 159                           "State=%p Op=%p [%s]\n", walk_state, op,
 160                           acpi_ut_get_type_name(object_type)));
 161
 162         switch (walk_state->opcode) {
 163         case AML_SCOPE_OP:
 164
 165                 /*
 166                  * The target name of the Scope() operator must exist at this point so
 167                  * that we can actually open the scope to enter new names underneath it.
 168                  * Allow search-to-root for single namesegs.
 169                  */
 170                 status =
 171                     acpi_ns_lookup(walk_state->scope_info, path, object_type,
 172                                    ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
 173                                    walk_state, &(node));
 174 #ifdef ACPI_ASL_COMPILER
 175                 if (status == AE_NOT_FOUND) {
 176                         /*
 177                          * Table disassembly:
 178                          * Target of Scope() not found. Generate an External for it, and
 179                          * insert the name into the namespace.
 180                          */
 181                         acpi_dm_add_to_external_list(op, path, ACPI_TYPE_DEVICE,
 182                                                      0);
 183                         status =
 184                             acpi_ns_lookup(walk_state->scope_info, path,
 185                                            object_type, ACPI_IMODE_LOAD_PASS1,
 186                                            ACPI_NS_SEARCH_PARENT, walk_state,
 187                                            &node);
 188                 }
 189 #endif
 190                 if (ACPI_FAILURE(status)) {
 191                         ACPI_ERROR_NAMESPACE(path, status);
 192                         return_ACPI_STATUS(status);
 193                 }
 194
 195                 /*
 196                  * Check to make sure that the target is
 197                  * one of the opcodes that actually opens a scope
 198                  */
 199                 switch (node->type) {
 200                 case ACPI_TYPE_ANY:
 201                 case ACPI_TYPE_LOCAL_SCOPE:     /* Scope  */
 202                 case ACPI_TYPE_DEVICE:
 203                 case ACPI_TYPE_POWER:
 204                 case ACPI_TYPE_PROCESSOR:
 205                 case ACPI_TYPE_THERMAL:
 206
 207                         /* These are acceptable types */
 208                         break;
 209
 210                 case ACPI_TYPE_INTEGER:
 211                 case ACPI_TYPE_STRING:
 212                 case ACPI_TYPE_BUFFER:
 213
 214                         /*
 215                          * These types we will allow, but we will change the type.
 216                          * This enables some existing code of the form:
 217                          *
 218                          *  Name (DEB, 0)
 219                          *  Scope (DEB) { ... }
 220                          *
 221                          * Note: silently change the type here. On the second pass,
 222                          * we will report a warning
 223                          */
 224                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 225                                           "Type override - [%4.4s] had invalid type (%s) "
 226                                           "for Scope operator, changed to type ANY\n",
 227                                           acpi_ut_get_node_name(node),
 228                                           acpi_ut_get_type_name(node->type)));
 229
 230                         node->type = ACPI_TYPE_ANY;
 231                         walk_state->scope_info->common.value = ACPI_TYPE_ANY;
 232                         break;
 233
 234                 case ACPI_TYPE_METHOD:
 235
 236                         /*
 237                          * Allow scope change to root during execution of module-level
 238                          * code. Root is typed METHOD during this time.
 239                          */
 240                         if ((node == acpi_gbl_root_node) &&
 241                             (walk_state->
 242                              parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
 243                                 break;
 244                         }
 245
 246                         /*lint -fallthrough */
 247
 248                 default:
 249
 250                         /* All other types are an error */
 251
 252                         ACPI_ERROR((AE_INFO,
 253                                     "Invalid type (%s) for target of "
 254                                     "Scope operator [%4.4s] (Cannot override)",
 255                                     acpi_ut_get_type_name(node->type),
 256                                     acpi_ut_get_node_name(node)));
 257
 258                         return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 259                 }
 260                 break;
 261
 262         default:
 263                 /*
 264                  * For all other named opcodes, we will enter the name into
 265                  * the namespace.
 266                  *
 267                  * Setup the search flags.
 268                  * Since we are entering a name into the namespace, we do not want to
 269                  * enable the search-to-root upsearch.
 270                  *
 271                  * There are only two conditions where it is acceptable that the name
 272                  * already exists:
 273                  *    1) the Scope() operator can reopen a scoping object that was
 274                  *       previously defined (Scope, Method, Device, etc.)
 275                  *    2) Whenever we are parsing a deferred opcode (op_region, Buffer,
 276                  *       buffer_field, or Package), the name of the object is already
 277                  *       in the namespace.
 278                  */
 279                 if (walk_state->deferred_node) {
 280
 281                         /* This name is already in the namespace, get the node */
 282
 283                         node = walk_state->deferred_node;
 284                         status = AE_OK;
 285                         break;
 286                 }
 287
 288                 /*
 289                  * If we are executing a method, do not create any namespace objects
 290                  * during the load phase, only during execution.
 291                  */
 292                 if (walk_state->method_node) {
 293                         node = NULL;
 294                         status = AE_OK;
 295                         break;
 296                 }
 297
 298                 flags = ACPI_NS_NO_UPSEARCH;
 299                 if ((walk_state->opcode != AML_SCOPE_OP) &&
 300                     (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
 301                         flags |= ACPI_NS_ERROR_IF_FOUND;
 302                         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 303                                           "[%s] Cannot already exist\n",
 304                                           acpi_ut_get_type_name(object_type)));
 305                 } else {
 306                         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 307                                           "[%s] Both Find or Create allowed\n",
 308                                           acpi_ut_get_type_name(object_type)));
 309                 }
 310
 311                 /*
 312                  * Enter the named type into the internal namespace. We enter the name
 313                  * as we go downward in the parse tree. Any necessary subobjects that
 314                  * involve arguments to the opcode must be created as we go back up the
 315                  * parse tree later.
 316                  */
 317                 status =
 318                     acpi_ns_lookup(walk_state->scope_info, path, object_type,
 319                                    ACPI_IMODE_LOAD_PASS1, flags, walk_state,
 320                                    &node);
 321                 if (ACPI_FAILURE(status)) {
 322                         if (status == AE_ALREADY_EXISTS) {
 323
 324                                 /* The name already exists in this scope */
 325
 326                                 if (node->flags & ANOBJ_IS_EXTERNAL) {
 327                                         /*
 328                                          * Allow one create on an object or segment that was
 329                                          * previously declared External
 330                                          */
 331                                         node->flags &= ~ANOBJ_IS_EXTERNAL;
 332                                         node->type = (u8) object_type;
 333
 334                                         /* Just retyped a node, probably will need to open a scope */
 335
 336                                         if (acpi_ns_opens_scope(object_type)) {
 337                                                 status =
 338                                                     acpi_ds_scope_stack_push
 339                                                     (node, object_type,
 340                                                      walk_state);
 341                                                 if (ACPI_FAILURE(status)) {
 342                                                         return_ACPI_STATUS
 343                                                             (status);
 344                                                 }
 345                                         }
 346
 347                                         status = AE_OK;
 348                                 }
 349                         }
 350
 351                         if (ACPI_FAILURE(status)) {
 352                                 ACPI_ERROR_NAMESPACE(path, status);
 353                                 return_ACPI_STATUS(status);
 354                         }
 355                 }
 356                 break;
 357         }
 358
 359         /* Common exit */
 360
 361         if (!op) {
 362
 363                 /* Create a new op */
 364
 365                 op = acpi_ps_alloc_op(walk_state->opcode);
 366                 if (!op) {
 367                         return_ACPI_STATUS(AE_NO_MEMORY);
 368                 }
 369         }
 370
 371         /* Initialize the op */
 372
 373 #if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
 374         op->named.path = ACPI_CAST_PTR(u8, path);
 375 #endif
 376
 377         if (node) {
 378                 /*
 379                  * Put the Node in the "op" object that the parser uses, so we
 380                  * can get it again quickly when this scope is closed
 381                  */
 382                 op->common.node = node;
 383                 op->named.name = node->name.integer;
 384         }
 385
 386         acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
 387                            op);
 388         *out_op = op;
 389         return_ACPI_STATUS(status);
 390 }
 391
 392 /*******************************************************************************
 393  *
 394  * FUNCTION:    acpi_ds_load1_end_op
 395  *
 396  * PARAMETERS:  walk_state      - Current state of the parse tree walk
 397  *
 398  * RETURN:      Status
 399  *
 400  * DESCRIPTION: Ascending callback used during the loading of the namespace,
 401  *              both control methods and everything else.
 402  *
 403  ******************************************************************************/
 404
 405 acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
 406 {
 407         union acpi_parse_object *op;
 408         acpi_object_type object_type;
 409         acpi_status status = AE_OK;
 410
 411         ACPI_FUNCTION_TRACE(ds_load1_end_op);
 412
 413         op = walk_state->op;
 414         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
 415                           walk_state));
 416
 417         /* We are only interested in opcodes that have an associated name */
 418
 419         if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
 420                 return_ACPI_STATUS(AE_OK);
 421         }
 422
 423         /* Get the object type to determine if we should pop the scope */
 424
 425         object_type = walk_state->op_info->object_type;
 426
 427 #ifndef ACPI_NO_METHOD_EXECUTION
 428         if (walk_state->op_info->flags & AML_FIELD) {
 429                 /*
 430                  * If we are executing a method, do not create any namespace objects
 431                  * during the load phase, only during execution.
 432                  */
 433                 if (!walk_state->method_node) {
 434                         if (walk_state->opcode == AML_FIELD_OP ||
 435                             walk_state->opcode == AML_BANK_FIELD_OP ||
 436                             walk_state->opcode == AML_INDEX_FIELD_OP) {
 437                                 status =
 438                                     acpi_ds_init_field_objects(op, walk_state);
 439                         }
 440                 }
 441                 return_ACPI_STATUS(status);
 442         }
 443
 444         /*
 445          * If we are executing a method, do not create any namespace objects
 446          * during the load phase, only during execution.
 447          */
 448         if (!walk_state->method_node) {
 449                 if (op->common.aml_opcode == AML_REGION_OP) {
 450                         status =
 451                             acpi_ex_create_region(op->named.data,
 452                                                   op->named.length,
 453                                                   (acpi_adr_space_type) ((op->
 454                                                                           common.
 455                                                                           value.
 456                                                                           arg)->
 457                                                                          common.
 458                                                                          value.
 459                                                                          integer),
 460                                                   walk_state);
 461                         if (ACPI_FAILURE(status)) {
 462                                 return_ACPI_STATUS(status);
 463                         }
 464                 } else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
 465                         status =
 466                             acpi_ex_create_region(op->named.data,
 467                                                   op->named.length,
 468                                                   ACPI_ADR_SPACE_DATA_TABLE,
 469                                                   walk_state);
 470                         if (ACPI_FAILURE(status)) {
 471                                 return_ACPI_STATUS(status);
 472                         }
 473                 }
 474         }
 475 #endif
 476
 477         if (op->common.aml_opcode == AML_NAME_OP) {
 478
 479                 /* For Name opcode, get the object type from the argument */
 480
 481                 if (op->common.value.arg) {
 482                         object_type = (acpi_ps_get_opcode_info((op->common.
 483                                                                 value.arg)->
 484                                                                common.
 485                                                                aml_opcode))->
 486                             object_type;
 487
 488                         /* Set node type if we have a namespace node */
 489
 490                         if (op->common.node) {
 491                                 op->common.node->type = (u8) object_type;
 492                         }
 493                 }
 494         }
 495
 496         /*
 497          * If we are executing a method, do not create any namespace objects
 498          * during the load phase, only during execution.
 499          */
 500         if (!walk_state->method_node) {
 501                 if (op->common.aml_opcode == AML_METHOD_OP) {
 502                         /*
 503                          * method_op pkg_length name_string method_flags term_list
 504                          *
 505                          * Note: We must create the method node/object pair as soon as we
 506                          * see the method declaration. This allows later pass1 parsing
 507                          * of invocations of the method (need to know the number of
 508                          * arguments.)
 509                          */
 510                         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 511                                           "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
 512                                           walk_state, op, op->named.node));
 513
 514                         if (!acpi_ns_get_attached_object(op->named.node)) {
 515                                 walk_state->operands[0] =
 516                                     ACPI_CAST_PTR(void, op->named.node);
 517                                 walk_state->num_operands = 1;
 518
 519                                 status =
 520                                     acpi_ds_create_operands(walk_state,
 521                                                             op->common.value.
 522                                                             arg);
 523                                 if (ACPI_SUCCESS(status)) {
 524                                         status =
 525                                             acpi_ex_create_method(op->named.
 526                                                                   data,
 527                                                                   op->named.
 528                                                                   length,
 529                                                                   walk_state);
 530                                 }
 531
 532                                 walk_state->operands[0] = NULL;
 533                                 walk_state->num_operands = 0;
 534
 535                                 if (ACPI_FAILURE(status)) {
 536                                         return_ACPI_STATUS(status);
 537                                 }
 538                         }
 539                 }
 540         }
 541
 542         /* Pop the scope stack (only if loading a table) */
 543
 544         if (!walk_state->method_node && acpi_ns_opens_scope(object_type)) {
 545                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 546                                   "(%s): Popping scope for Op %p\n",
 547                                   acpi_ut_get_type_name(object_type), op));
 548
 549                 status = acpi_ds_scope_stack_pop(walk_state);
 550         }
 551
 552         return_ACPI_STATUS(status);
 553 }