]> Pileus Git - ~andy/linux/blob - arch/tile/kernel/signal.c
Merge branch 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
[~andy/linux] / arch / tile / kernel / signal.c
1 /*
2  * Copyright (C) 1991, 1992  Linus Torvalds
3  * Copyright 2010 Tilera Corporation. All Rights Reserved.
4  *
5  *   This program is free software; you can redistribute it and/or
6  *   modify it under the terms of the GNU General Public License
7  *   as published by the Free Software Foundation, version 2.
8  *
9  *   This program is distributed in the hope that it will be useful, but
10  *   WITHOUT ANY WARRANTY; without even the implied warranty of
11  *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
12  *   NON INFRINGEMENT.  See the GNU General Public License for
13  *   more details.
14  */
15
16 #include <linux/sched.h>
17 #include <linux/mm.h>
18 #include <linux/smp.h>
19 #include <linux/kernel.h>
20 #include <linux/signal.h>
21 #include <linux/errno.h>
22 #include <linux/wait.h>
23 #include <linux/unistd.h>
24 #include <linux/stddef.h>
25 #include <linux/personality.h>
26 #include <linux/suspend.h>
27 #include <linux/ptrace.h>
28 #include <linux/elf.h>
29 #include <linux/compat.h>
30 #include <linux/syscalls.h>
31 #include <linux/uaccess.h>
32 #include <asm/processor.h>
33 #include <asm/ucontext.h>
34 #include <asm/sigframe.h>
35 #include <asm/syscalls.h>
36 #include <arch/interrupts.h>
37
38 #define DEBUG_SIG 0
39
40 SYSCALL_DEFINE3(sigaltstack, const stack_t __user *, uss,
41                 stack_t __user *, uoss, struct pt_regs *, regs)
42 {
43         return do_sigaltstack(uss, uoss, regs->sp);
44 }
45
46
47 /*
48  * Do a signal return; undo the signal stack.
49  */
50
51 int restore_sigcontext(struct pt_regs *regs,
52                        struct sigcontext __user *sc)
53 {
54         int err = 0;
55         int i;
56
57         /* Always make any pending restarted system calls return -EINTR */
58         current_thread_info()->restart_block.fn = do_no_restart_syscall;
59
60         /*
61          * Enforce that sigcontext is like pt_regs, and doesn't mess
62          * up our stack alignment rules.
63          */
64         BUILD_BUG_ON(sizeof(struct sigcontext) != sizeof(struct pt_regs));
65         BUILD_BUG_ON(sizeof(struct sigcontext) % 8 != 0);
66
67         for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
68                 err |= __get_user(regs->regs[i], &sc->gregs[i]);
69
70         /* Ensure that the PL is always set to USER_PL. */
71         regs->ex1 = PL_ICS_EX1(USER_PL, EX1_ICS(regs->ex1));
72
73         regs->faultnum = INT_SWINT_1_SIGRETURN;
74
75         return err;
76 }
77
78 void signal_fault(const char *type, struct pt_regs *regs,
79                   void __user *frame, int sig)
80 {
81         trace_unhandled_signal(type, regs, (unsigned long)frame, SIGSEGV);
82         force_sigsegv(sig, current);
83 }
84
85 /* The assembly shim for this function arranges to ignore the return value. */
86 SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
87 {
88         struct rt_sigframe __user *frame =
89                 (struct rt_sigframe __user *)(regs->sp);
90         sigset_t set;
91
92         if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
93                 goto badframe;
94         if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
95                 goto badframe;
96
97         set_current_blocked(&set);
98
99         if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
100                 goto badframe;
101
102         if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
103                 goto badframe;
104
105         return 0;
106
107 badframe:
108         signal_fault("bad sigreturn frame", regs, frame, 0);
109         return 0;
110 }
111
112 /*
113  * Set up a signal frame.
114  */
115
116 int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
117 {
118         int i, err = 0;
119
120         for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
121                 err |= __put_user(regs->regs[i], &sc->gregs[i]);
122
123         return err;
124 }
125
126 /*
127  * Determine which stack to use..
128  */
129 static inline void __user *get_sigframe(struct k_sigaction *ka,
130                                         struct pt_regs *regs,
131                                         size_t frame_size)
132 {
133         unsigned long sp;
134
135         /* Default to using normal stack */
136         sp = regs->sp;
137
138         /*
139          * If we are on the alternate signal stack and would overflow
140          * it, don't.  Return an always-bogus address instead so we
141          * will die with SIGSEGV.
142          */
143         if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size)))
144                 return (void __user __force *)-1UL;
145
146         /* This is the X/Open sanctioned signal stack switching.  */
147         if (ka->sa.sa_flags & SA_ONSTACK) {
148                 if (sas_ss_flags(sp) == 0)
149                         sp = current->sas_ss_sp + current->sas_ss_size;
150         }
151
152         sp -= frame_size;
153         /*
154          * Align the stack pointer according to the TILE ABI,
155          * i.e. so that on function entry (sp & 15) == 0.
156          */
157         sp &= -16UL;
158         return (void __user *) sp;
159 }
160
161 static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
162                            sigset_t *set, struct pt_regs *regs)
163 {
164         unsigned long restorer;
165         struct rt_sigframe __user *frame;
166         int err = 0;
167         int usig;
168
169         frame = get_sigframe(ka, regs, sizeof(*frame));
170
171         if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
172                 goto give_sigsegv;
173
174         usig = current_thread_info()->exec_domain
175                 && current_thread_info()->exec_domain->signal_invmap
176                 && sig < 32
177                 ? current_thread_info()->exec_domain->signal_invmap[sig]
178                 : sig;
179
180         /* Always write at least the signal number for the stack backtracer. */
181         if (ka->sa.sa_flags & SA_SIGINFO) {
182                 /* At sigreturn time, restore the callee-save registers too. */
183                 err |= copy_siginfo_to_user(&frame->info, info);
184                 regs->flags |= PT_FLAGS_RESTORE_REGS;
185         } else {
186                 err |= __put_user(info->si_signo, &frame->info.si_signo);
187         }
188
189         /* Create the ucontext.  */
190         err |= __clear_user(&frame->save_area, sizeof(frame->save_area));
191         err |= __put_user(0, &frame->uc.uc_flags);
192         err |= __put_user(NULL, &frame->uc.uc_link);
193         err |= __put_user((void __user *)(current->sas_ss_sp),
194                           &frame->uc.uc_stack.ss_sp);
195         err |= __put_user(sas_ss_flags(regs->sp),
196                           &frame->uc.uc_stack.ss_flags);
197         err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
198         err |= setup_sigcontext(&frame->uc.uc_mcontext, regs);
199         err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
200         if (err)
201                 goto give_sigsegv;
202
203         restorer = VDSO_BASE;
204         if (ka->sa.sa_flags & SA_RESTORER)
205                 restorer = (unsigned long) ka->sa.sa_restorer;
206
207         /*
208          * Set up registers for signal handler.
209          * Registers that we don't modify keep the value they had from
210          * user-space at the time we took the signal.
211          * We always pass siginfo and mcontext, regardless of SA_SIGINFO,
212          * since some things rely on this (e.g. glibc's debug/segfault.c).
213          */
214         regs->pc = (unsigned long) ka->sa.sa_handler;
215         regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
216         regs->sp = (unsigned long) frame;
217         regs->lr = restorer;
218         regs->regs[0] = (unsigned long) usig;
219         regs->regs[1] = (unsigned long) &frame->info;
220         regs->regs[2] = (unsigned long) &frame->uc;
221         regs->flags |= PT_FLAGS_CALLER_SAVES;
222
223         /*
224          * Notify any tracer that was single-stepping it.
225          * The tracer may want to single-step inside the
226          * handler too.
227          */
228         if (test_thread_flag(TIF_SINGLESTEP))
229                 ptrace_notify(SIGTRAP);
230
231         return 0;
232
233 give_sigsegv:
234         signal_fault("bad setup frame", regs, frame, sig);
235         return -EFAULT;
236 }
237
238 /*
239  * OK, we're invoking a handler
240  */
241
242 static void handle_signal(unsigned long sig, siginfo_t *info,
243                          struct k_sigaction *ka,
244                          struct pt_regs *regs)
245 {
246         sigset_t *oldset = sigmask_to_save();
247         int ret;
248
249         /* Are we from a system call? */
250         if (regs->faultnum == INT_SWINT_1) {
251                 /* If so, check system call restarting.. */
252                 switch (regs->regs[0]) {
253                 case -ERESTART_RESTARTBLOCK:
254                 case -ERESTARTNOHAND:
255                         regs->regs[0] = -EINTR;
256                         break;
257
258                 case -ERESTARTSYS:
259                         if (!(ka->sa.sa_flags & SA_RESTART)) {
260                                 regs->regs[0] = -EINTR;
261                                 break;
262                         }
263                         /* fallthrough */
264                 case -ERESTARTNOINTR:
265                         /* Reload caller-saves to restore r0..r5 and r10. */
266                         regs->flags |= PT_FLAGS_CALLER_SAVES;
267                         regs->regs[0] = regs->orig_r0;
268                         regs->pc -= 8;
269                 }
270         }
271
272         /* Set up the stack frame */
273 #ifdef CONFIG_COMPAT
274         if (is_compat_task())
275                 ret = compat_setup_rt_frame(sig, ka, info, oldset, regs);
276         else
277 #endif
278                 ret = setup_rt_frame(sig, ka, info, oldset, regs);
279         if (ret)
280                 return;
281         signal_delivered(sig, info, ka, regs, 0);
282 }
283
284 /*
285  * Note that 'init' is a special process: it doesn't get signals it doesn't
286  * want to handle. Thus you cannot kill init even with a SIGKILL even by
287  * mistake.
288  */
289 void do_signal(struct pt_regs *regs)
290 {
291         siginfo_t info;
292         int signr;
293         struct k_sigaction ka;
294
295         /*
296          * i386 will check if we're coming from kernel mode and bail out
297          * here.  In my experience this just turns weird crashes into
298          * weird spin-hangs.  But if we find a case where this seems
299          * helpful, we can reinstate the check on "!user_mode(regs)".
300          */
301
302         signr = get_signal_to_deliver(&info, &ka, regs, NULL);
303         if (signr > 0) {
304                 /* Whee! Actually deliver the signal.  */
305                 handle_signal(signr, &info, &ka, regs);
306                 goto done;
307         }
308
309         /* Did we come from a system call? */
310         if (regs->faultnum == INT_SWINT_1) {
311                 /* Restart the system call - no handlers present */
312                 switch (regs->regs[0]) {
313                 case -ERESTARTNOHAND:
314                 case -ERESTARTSYS:
315                 case -ERESTARTNOINTR:
316                         regs->flags |= PT_FLAGS_CALLER_SAVES;
317                         regs->regs[0] = regs->orig_r0;
318                         regs->pc -= 8;
319                         break;
320
321                 case -ERESTART_RESTARTBLOCK:
322                         regs->flags |= PT_FLAGS_CALLER_SAVES;
323                         regs->regs[TREG_SYSCALL_NR] = __NR_restart_syscall;
324                         regs->pc -= 8;
325                         break;
326                 }
327         }
328
329         /* If there's no signal to deliver, just put the saved sigmask back. */
330         restore_saved_sigmask();
331
332 done:
333         /* Avoid double syscall restart if there are nested signals. */
334         regs->faultnum = INT_SWINT_1_SIGRETURN;
335 }
336
337 int show_unhandled_signals = 1;
338
339 static int __init crashinfo(char *str)
340 {
341         unsigned long val;
342         const char *word;
343
344         if (*str == '\0')
345                 val = 2;
346         else if (*str != '=' || strict_strtoul(++str, 0, &val) != 0)
347                 return 0;
348         show_unhandled_signals = val;
349         switch (show_unhandled_signals) {
350         case 0:
351                 word = "No";
352                 break;
353         case 1:
354                 word = "One-line";
355                 break;
356         default:
357                 word = "Detailed";
358                 break;
359         }
360         pr_info("%s crash reports will be generated on the console\n", word);
361         return 1;
362 }
363 __setup("crashinfo", crashinfo);
364
365 static void dump_mem(void __user *address)
366 {
367         void __user *addr;
368         enum { region_size = 256, bytes_per_line = 16 };
369         int i, j, k;
370         int found_readable_mem = 0;
371
372         pr_err("\n");
373         if (!access_ok(VERIFY_READ, address, 1)) {
374                 pr_err("Not dumping at address 0x%lx (kernel address)\n",
375                        (unsigned long)address);
376                 return;
377         }
378
379         addr = (void __user *)
380                 (((unsigned long)address & -bytes_per_line) - region_size/2);
381         if (addr > address)
382                 addr = NULL;
383         for (i = 0; i < region_size;
384              addr += bytes_per_line, i += bytes_per_line) {
385                 unsigned char buf[bytes_per_line];
386                 char line[100];
387                 if (copy_from_user(buf, addr, bytes_per_line))
388                         continue;
389                 if (!found_readable_mem) {
390                         pr_err("Dumping memory around address 0x%lx:\n",
391                                (unsigned long)address);
392                         found_readable_mem = 1;
393                 }
394                 j = sprintf(line, REGFMT":", (unsigned long)addr);
395                 for (k = 0; k < bytes_per_line; ++k)
396                         j += sprintf(&line[j], " %02x", buf[k]);
397                 pr_err("%s\n", line);
398         }
399         if (!found_readable_mem)
400                 pr_err("No readable memory around address 0x%lx\n",
401                        (unsigned long)address);
402 }
403
404 void trace_unhandled_signal(const char *type, struct pt_regs *regs,
405                             unsigned long address, int sig)
406 {
407         struct task_struct *tsk = current;
408
409         if (show_unhandled_signals == 0)
410                 return;
411
412         /* If the signal is handled, don't show it here. */
413         if (!is_global_init(tsk)) {
414                 void __user *handler =
415                         tsk->sighand->action[sig-1].sa.sa_handler;
416                 if (handler != SIG_IGN && handler != SIG_DFL)
417                         return;
418         }
419
420         /* Rate-limit the one-line output, not the detailed output. */
421         if (show_unhandled_signals <= 1 && !printk_ratelimit())
422                 return;
423
424         printk("%s%s[%d]: %s at %lx pc "REGFMT" signal %d",
425                task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
426                tsk->comm, task_pid_nr(tsk), type, address, regs->pc, sig);
427
428         print_vma_addr(KERN_CONT " in ", regs->pc);
429
430         printk(KERN_CONT "\n");
431
432         if (show_unhandled_signals > 1) {
433                 switch (sig) {
434                 case SIGILL:
435                 case SIGFPE:
436                 case SIGSEGV:
437                 case SIGBUS:
438                         pr_err("User crash: signal %d,"
439                                " trap %ld, address 0x%lx\n",
440                                sig, regs->faultnum, address);
441                         show_regs(regs);
442                         dump_mem((void __user *)address);
443                         break;
444                 default:
445                         pr_err("User crash: signal %d, trap %ld\n",
446                                sig, regs->faultnum);
447                         break;
448                 }
449         }
450 }