]> Pileus Git - ~andy/linux/blob - arch/sh/boards/mach-ecovec24/setup.c
Merge branch 'for-2.6.38' into for-2.6.39
[~andy/linux] / arch / sh / boards / mach-ecovec24 / setup.c
1 /*
2  * Copyright (C) 2009 Renesas Solutions Corp.
3  *
4  * Kuninori Morimoto <morimoto.kuninori@renesas.com>
5  *
6  * This file is subject to the terms and conditions of the GNU General Public
7  * License.  See the file "COPYING" in the main directory of this archive
8  * for more details.
9  */
10
11 #include <linux/init.h>
12 #include <linux/device.h>
13 #include <linux/platform_device.h>
14 #include <linux/mfd/sh_mobile_sdhi.h>
15 #include <linux/mmc/host.h>
16 #include <linux/mmc/sh_mmcif.h>
17 #include <linux/mtd/physmap.h>
18 #include <linux/gpio.h>
19 #include <linux/interrupt.h>
20 #include <linux/io.h>
21 #include <linux/delay.h>
22 #include <linux/usb/r8a66597.h>
23 #include <linux/i2c.h>
24 #include <linux/i2c/tsc2007.h>
25 #include <linux/spi/spi.h>
26 #include <linux/spi/sh_msiof.h>
27 #include <linux/spi/mmc_spi.h>
28 #include <linux/input.h>
29 #include <linux/input/sh_keysc.h>
30 #include <video/sh_mobile_lcdc.h>
31 #include <sound/sh_fsi.h>
32 #include <media/sh_mobile_ceu.h>
33 #include <media/tw9910.h>
34 #include <media/mt9t112.h>
35 #include <asm/heartbeat.h>
36 #include <asm/sh_eth.h>
37 #include <asm/clock.h>
38 #include <asm/suspend.h>
39 #include <cpu/sh7724.h>
40
41 /*
42  *  Address      Interface        BusWidth
43  *-----------------------------------------
44  *  0x0000_0000  uboot            16bit
45  *  0x0004_0000  Linux romImage   16bit
46  *  0x0014_0000  MTD for Linux    16bit
47  *  0x0400_0000  Internal I/O     16/32bit
48  *  0x0800_0000  DRAM             32bit
49  *  0x1800_0000  MFI              16bit
50  */
51
52 /* SWITCH
53  *------------------------------
54  * DS2[1] = FlashROM write protect  ON     : write protect
55  *                                  OFF    : No write protect
56  * DS2[2] = RMII / TS, SCIF         ON     : RMII
57  *                                  OFF    : TS, SCIF3
58  * DS2[3] = Camera / Video          ON     : Camera
59  *                                  OFF    : NTSC/PAL (IN)
60  * DS2[5] = NTSC_OUT Clock          ON     : On board OSC
61  *                                  OFF    : SH7724 DV_CLK
62  * DS2[6-7] = MMC / SD              ON-OFF : SD
63  *                                  OFF-ON : MMC
64  */
65
66 /* Heartbeat */
67 static unsigned char led_pos[] = { 0, 1, 2, 3 };
68
69 static struct heartbeat_data heartbeat_data = {
70         .nr_bits = 4,
71         .bit_pos = led_pos,
72 };
73
74 static struct resource heartbeat_resource = {
75         .start  = 0xA405012C, /* PTG */
76         .end    = 0xA405012E - 1,
77         .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
78 };
79
80 static struct platform_device heartbeat_device = {
81         .name           = "heartbeat",
82         .id             = -1,
83         .dev = {
84                 .platform_data = &heartbeat_data,
85         },
86         .num_resources  = 1,
87         .resource       = &heartbeat_resource,
88 };
89
90 /* MTD */
91 static struct mtd_partition nor_flash_partitions[] = {
92         {
93                 .name = "boot loader",
94                 .offset = 0,
95                 .size = (5 * 1024 * 1024),
96                 .mask_flags = MTD_WRITEABLE,  /* force read-only */
97         }, {
98                 .name = "free-area",
99                 .offset = MTDPART_OFS_APPEND,
100                 .size = MTDPART_SIZ_FULL,
101         },
102 };
103
104 static struct physmap_flash_data nor_flash_data = {
105         .width          = 2,
106         .parts          = nor_flash_partitions,
107         .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
108 };
109
110 static struct resource nor_flash_resources[] = {
111         [0] = {
112                 .name   = "NOR Flash",
113                 .start  = 0x00000000,
114                 .end    = 0x03ffffff,
115                 .flags  = IORESOURCE_MEM,
116         }
117 };
118
119 static struct platform_device nor_flash_device = {
120         .name           = "physmap-flash",
121         .resource       = nor_flash_resources,
122         .num_resources  = ARRAY_SIZE(nor_flash_resources),
123         .dev            = {
124                 .platform_data = &nor_flash_data,
125         },
126 };
127
128 /* SH Eth */
129 #define SH_ETH_ADDR     (0xA4600000)
130 static struct resource sh_eth_resources[] = {
131         [0] = {
132                 .start = SH_ETH_ADDR,
133                 .end   = SH_ETH_ADDR + 0x1FC,
134                 .flags = IORESOURCE_MEM,
135         },
136         [1] = {
137                 .start = 91,
138                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
139         },
140 };
141
142 static struct sh_eth_plat_data sh_eth_plat = {
143         .phy = 0x1f, /* SMSC LAN8700 */
144         .edmac_endian = EDMAC_LITTLE_ENDIAN,
145         .ether_link_active_low = 1
146 };
147
148 static struct platform_device sh_eth_device = {
149         .name = "sh-eth",
150         .id     = 0,
151         .dev = {
152                 .platform_data = &sh_eth_plat,
153         },
154         .num_resources = ARRAY_SIZE(sh_eth_resources),
155         .resource = sh_eth_resources,
156         .archdata = {
157                 .hwblk_id = HWBLK_ETHER,
158         },
159 };
160
161 /* USB0 host */
162 static void usb0_port_power(int port, int power)
163 {
164         gpio_set_value(GPIO_PTB4, power);
165 }
166
167 static struct r8a66597_platdata usb0_host_data = {
168         .on_chip = 1,
169         .port_power = usb0_port_power,
170 };
171
172 static struct resource usb0_host_resources[] = {
173         [0] = {
174                 .start  = 0xa4d80000,
175                 .end    = 0xa4d80124 - 1,
176                 .flags  = IORESOURCE_MEM,
177         },
178         [1] = {
179                 .start  = 65,
180                 .end    = 65,
181                 .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
182         },
183 };
184
185 static struct platform_device usb0_host_device = {
186         .name           = "r8a66597_hcd",
187         .id             = 0,
188         .dev = {
189                 .dma_mask               = NULL,         /*  not use dma */
190                 .coherent_dma_mask      = 0xffffffff,
191                 .platform_data          = &usb0_host_data,
192         },
193         .num_resources  = ARRAY_SIZE(usb0_host_resources),
194         .resource       = usb0_host_resources,
195 };
196
197 /* USB1 host/function */
198 static void usb1_port_power(int port, int power)
199 {
200         gpio_set_value(GPIO_PTB5, power);
201 }
202
203 static struct r8a66597_platdata usb1_common_data = {
204         .on_chip = 1,
205         .port_power = usb1_port_power,
206 };
207
208 static struct resource usb1_common_resources[] = {
209         [0] = {
210                 .start  = 0xa4d90000,
211                 .end    = 0xa4d90124 - 1,
212                 .flags  = IORESOURCE_MEM,
213         },
214         [1] = {
215                 .start  = 66,
216                 .end    = 66,
217                 .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
218         },
219 };
220
221 static struct platform_device usb1_common_device = {
222         /* .name will be added in arch_setup */
223         .id             = 1,
224         .dev = {
225                 .dma_mask               = NULL,         /*  not use dma */
226                 .coherent_dma_mask      = 0xffffffff,
227                 .platform_data          = &usb1_common_data,
228         },
229         .num_resources  = ARRAY_SIZE(usb1_common_resources),
230         .resource       = usb1_common_resources,
231 };
232
233 /* LCDC */
234 const static struct fb_videomode ecovec_lcd_modes[] = {
235         {
236                 .name           = "Panel",
237                 .xres           = 800,
238                 .yres           = 480,
239                 .left_margin    = 220,
240                 .right_margin   = 110,
241                 .hsync_len      = 70,
242                 .upper_margin   = 20,
243                 .lower_margin   = 5,
244                 .vsync_len      = 5,
245                 .sync           = 0, /* hsync and vsync are active low */
246         },
247 };
248
249 const static struct fb_videomode ecovec_dvi_modes[] = {
250         {
251                 .name           = "DVI",
252                 .xres           = 1280,
253                 .yres           = 720,
254                 .left_margin    = 220,
255                 .right_margin   = 110,
256                 .hsync_len      = 40,
257                 .upper_margin   = 20,
258                 .lower_margin   = 5,
259                 .vsync_len      = 5,
260                 .sync = 0, /* hsync and vsync are active low */
261         },
262 };
263
264 static struct sh_mobile_lcdc_info lcdc_info = {
265         .ch[0] = {
266                 .interface_type = RGB18,
267                 .chan = LCDC_CHAN_MAINLCD,
268                 .bpp = 16,
269                 .lcd_size_cfg = { /* 7.0 inch */
270                         .width = 152,
271                         .height = 91,
272                 },
273                 .board_cfg = {
274                 },
275         }
276 };
277
278 static struct resource lcdc_resources[] = {
279         [0] = {
280                 .name   = "LCDC",
281                 .start  = 0xfe940000,
282                 .end    = 0xfe942fff,
283                 .flags  = IORESOURCE_MEM,
284         },
285         [1] = {
286                 .start  = 106,
287                 .flags  = IORESOURCE_IRQ,
288         },
289 };
290
291 static struct platform_device lcdc_device = {
292         .name           = "sh_mobile_lcdc_fb",
293         .num_resources  = ARRAY_SIZE(lcdc_resources),
294         .resource       = lcdc_resources,
295         .dev            = {
296                 .platform_data  = &lcdc_info,
297         },
298         .archdata = {
299                 .hwblk_id = HWBLK_LCDC,
300         },
301 };
302
303 /* CEU0 */
304 static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
305         .flags = SH_CEU_FLAG_USE_8BIT_BUS,
306 };
307
308 static struct resource ceu0_resources[] = {
309         [0] = {
310                 .name   = "CEU0",
311                 .start  = 0xfe910000,
312                 .end    = 0xfe91009f,
313                 .flags  = IORESOURCE_MEM,
314         },
315         [1] = {
316                 .start  = 52,
317                 .flags  = IORESOURCE_IRQ,
318         },
319         [2] = {
320                 /* place holder for contiguous memory */
321         },
322 };
323
324 static struct platform_device ceu0_device = {
325         .name           = "sh_mobile_ceu",
326         .id             = 0, /* "ceu0" clock */
327         .num_resources  = ARRAY_SIZE(ceu0_resources),
328         .resource       = ceu0_resources,
329         .dev    = {
330                 .platform_data  = &sh_mobile_ceu0_info,
331         },
332         .archdata = {
333                 .hwblk_id = HWBLK_CEU0,
334         },
335 };
336
337 /* CEU1 */
338 static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
339         .flags = SH_CEU_FLAG_USE_8BIT_BUS,
340 };
341
342 static struct resource ceu1_resources[] = {
343         [0] = {
344                 .name   = "CEU1",
345                 .start  = 0xfe914000,
346                 .end    = 0xfe91409f,
347                 .flags  = IORESOURCE_MEM,
348         },
349         [1] = {
350                 .start  = 63,
351                 .flags  = IORESOURCE_IRQ,
352         },
353         [2] = {
354                 /* place holder for contiguous memory */
355         },
356 };
357
358 static struct platform_device ceu1_device = {
359         .name           = "sh_mobile_ceu",
360         .id             = 1, /* "ceu1" clock */
361         .num_resources  = ARRAY_SIZE(ceu1_resources),
362         .resource       = ceu1_resources,
363         .dev    = {
364                 .platform_data  = &sh_mobile_ceu1_info,
365         },
366         .archdata = {
367                 .hwblk_id = HWBLK_CEU1,
368         },
369 };
370
371 /* I2C device */
372 static struct i2c_board_info i2c0_devices[] = {
373         {
374                 I2C_BOARD_INFO("da7210", 0x1a),
375         },
376 };
377
378 static struct i2c_board_info i2c1_devices[] = {
379         {
380                 I2C_BOARD_INFO("r2025sd", 0x32),
381         },
382         {
383                 I2C_BOARD_INFO("lis3lv02d", 0x1c),
384                 .irq = 33,
385         }
386 };
387
388 /* KEYSC */
389 static struct sh_keysc_info keysc_info = {
390         .mode           = SH_KEYSC_MODE_1,
391         .scan_timing    = 3,
392         .delay          = 50,
393         .kycr2_delay    = 100,
394         .keycodes       = { KEY_1, 0, 0, 0, 0,
395                             KEY_2, 0, 0, 0, 0,
396                             KEY_3, 0, 0, 0, 0,
397                             KEY_4, 0, 0, 0, 0,
398                             KEY_5, 0, 0, 0, 0,
399                             KEY_6, 0, 0, 0, 0, },
400 };
401
402 static struct resource keysc_resources[] = {
403         [0] = {
404                 .name   = "KEYSC",
405                 .start  = 0x044b0000,
406                 .end    = 0x044b000f,
407                 .flags  = IORESOURCE_MEM,
408         },
409         [1] = {
410                 .start  = 79,
411                 .flags  = IORESOURCE_IRQ,
412         },
413 };
414
415 static struct platform_device keysc_device = {
416         .name           = "sh_keysc",
417         .id             = 0, /* keysc0 clock */
418         .num_resources  = ARRAY_SIZE(keysc_resources),
419         .resource       = keysc_resources,
420         .dev    = {
421                 .platform_data  = &keysc_info,
422         },
423         .archdata = {
424                 .hwblk_id = HWBLK_KEYSC,
425         },
426 };
427
428 /* TouchScreen */
429 #define IRQ0 32
430 static int ts_get_pendown_state(void)
431 {
432         int val = 0;
433         gpio_free(GPIO_FN_INTC_IRQ0);
434         gpio_request(GPIO_PTZ0, NULL);
435         gpio_direction_input(GPIO_PTZ0);
436
437         val = gpio_get_value(GPIO_PTZ0);
438
439         gpio_free(GPIO_PTZ0);
440         gpio_request(GPIO_FN_INTC_IRQ0, NULL);
441
442         return val ? 0 : 1;
443 }
444
445 static int ts_init(void)
446 {
447         gpio_request(GPIO_FN_INTC_IRQ0, NULL);
448         return 0;
449 }
450
451 static struct tsc2007_platform_data tsc2007_info = {
452         .model                  = 2007,
453         .x_plate_ohms           = 180,
454         .get_pendown_state      = ts_get_pendown_state,
455         .init_platform_hw       = ts_init,
456 };
457
458 static struct i2c_board_info ts_i2c_clients = {
459         I2C_BOARD_INFO("tsc2007", 0x48),
460         .type           = "tsc2007",
461         .platform_data  = &tsc2007_info,
462         .irq            = IRQ0,
463 };
464
465 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
466 /* SDHI0 */
467 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
468 {
469         gpio_set_value(GPIO_PTB6, state);
470 }
471
472 static struct sh_mobile_sdhi_info sdhi0_info = {
473         .dma_slave_tx   = SHDMA_SLAVE_SDHI0_TX,
474         .dma_slave_rx   = SHDMA_SLAVE_SDHI0_RX,
475         .set_pwr        = sdhi0_set_pwr,
476         .tmio_caps      = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD,
477 };
478
479 static struct resource sdhi0_resources[] = {
480         [0] = {
481                 .name   = "SDHI0",
482                 .start  = 0x04ce0000,
483                 .end    = 0x04ce01ff,
484                 .flags  = IORESOURCE_MEM,
485         },
486         [1] = {
487                 .start  = 100,
488                 .flags  = IORESOURCE_IRQ,
489         },
490 };
491
492 static struct platform_device sdhi0_device = {
493         .name           = "sh_mobile_sdhi",
494         .num_resources  = ARRAY_SIZE(sdhi0_resources),
495         .resource       = sdhi0_resources,
496         .id             = 0,
497         .dev    = {
498                 .platform_data  = &sdhi0_info,
499         },
500         .archdata = {
501                 .hwblk_id = HWBLK_SDHI0,
502         },
503 };
504
505 #if !defined(CONFIG_MMC_SH_MMCIF)
506 /* SDHI1 */
507 static void sdhi1_set_pwr(struct platform_device *pdev, int state)
508 {
509         gpio_set_value(GPIO_PTB7, state);
510 }
511
512 static struct sh_mobile_sdhi_info sdhi1_info = {
513         .dma_slave_tx   = SHDMA_SLAVE_SDHI1_TX,
514         .dma_slave_rx   = SHDMA_SLAVE_SDHI1_RX,
515         .tmio_caps      = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD,
516         .set_pwr        = sdhi1_set_pwr,
517 };
518
519 static struct resource sdhi1_resources[] = {
520         [0] = {
521                 .name   = "SDHI1",
522                 .start  = 0x04cf0000,
523                 .end    = 0x04cf01ff,
524                 .flags  = IORESOURCE_MEM,
525         },
526         [1] = {
527                 .start  = 23,
528                 .flags  = IORESOURCE_IRQ,
529         },
530 };
531
532 static struct platform_device sdhi1_device = {
533         .name           = "sh_mobile_sdhi",
534         .num_resources  = ARRAY_SIZE(sdhi1_resources),
535         .resource       = sdhi1_resources,
536         .id             = 1,
537         .dev    = {
538                 .platform_data  = &sdhi1_info,
539         },
540         .archdata = {
541                 .hwblk_id = HWBLK_SDHI1,
542         },
543 };
544 #endif /* CONFIG_MMC_SH_MMCIF */
545
546 #else
547
548 /* MMC SPI */
549 static int mmc_spi_get_ro(struct device *dev)
550 {
551         return gpio_get_value(GPIO_PTY6);
552 }
553
554 static int mmc_spi_get_cd(struct device *dev)
555 {
556         return !gpio_get_value(GPIO_PTY7);
557 }
558
559 static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
560 {
561         gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
562 }
563
564 static struct mmc_spi_platform_data mmc_spi_info = {
565         .get_ro = mmc_spi_get_ro,
566         .get_cd = mmc_spi_get_cd,
567         .caps = MMC_CAP_NEEDS_POLL,
568         .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
569         .setpower = mmc_spi_setpower,
570 };
571
572 static struct spi_board_info spi_bus[] = {
573         {
574                 .modalias       = "mmc_spi",
575                 .platform_data  = &mmc_spi_info,
576                 .max_speed_hz   = 5000000,
577                 .mode           = SPI_MODE_0,
578                 .controller_data = (void *) GPIO_PTM4,
579         },
580 };
581
582 /* MSIOF0 */
583 static struct sh_msiof_spi_info msiof0_data = {
584         .num_chipselect = 1,
585 };
586
587 static struct resource msiof0_resources[] = {
588         [0] = {
589                 .name   = "MSIOF0",
590                 .start  = 0xa4c40000,
591                 .end    = 0xa4c40063,
592                 .flags  = IORESOURCE_MEM,
593         },
594         [1] = {
595                 .start  = 84,
596                 .flags  = IORESOURCE_IRQ,
597         },
598 };
599
600 static struct platform_device msiof0_device = {
601         .name           = "spi_sh_msiof",
602         .id             = 0, /* MSIOF0 */
603         .dev = {
604                 .platform_data = &msiof0_data,
605         },
606         .num_resources  = ARRAY_SIZE(msiof0_resources),
607         .resource       = msiof0_resources,
608         .archdata = {
609                 .hwblk_id = HWBLK_MSIOF0,
610         },
611 };
612
613 #endif
614
615 /* I2C Video/Camera */
616 static struct i2c_board_info i2c_camera[] = {
617         {
618                 I2C_BOARD_INFO("tw9910", 0x45),
619         },
620         {
621                 /* 1st camera */
622                 I2C_BOARD_INFO("mt9t112", 0x3c),
623         },
624         {
625                 /* 2nd camera */
626                 I2C_BOARD_INFO("mt9t112", 0x3c),
627         },
628 };
629
630 /* tw9910 */
631 static int tw9910_power(struct device *dev, int mode)
632 {
633         int val = mode ? 0 : 1;
634
635         gpio_set_value(GPIO_PTU2, val);
636         if (mode)
637                 mdelay(100);
638
639         return 0;
640 }
641
642 static struct tw9910_video_info tw9910_info = {
643         .buswidth       = SOCAM_DATAWIDTH_8,
644         .mpout          = TW9910_MPO_FIELD,
645 };
646
647 static struct soc_camera_link tw9910_link = {
648         .i2c_adapter_id = 0,
649         .bus_id         = 1,
650         .power          = tw9910_power,
651         .board_info     = &i2c_camera[0],
652         .priv           = &tw9910_info,
653 };
654
655 /* mt9t112 */
656 static int mt9t112_power1(struct device *dev, int mode)
657 {
658         gpio_set_value(GPIO_PTA3, mode);
659         if (mode)
660                 mdelay(100);
661
662         return 0;
663 }
664
665 static struct mt9t112_camera_info mt9t112_info1 = {
666         .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
667         .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
668 };
669
670 static struct soc_camera_link mt9t112_link1 = {
671         .i2c_adapter_id = 0,
672         .power          = mt9t112_power1,
673         .bus_id         = 0,
674         .board_info     = &i2c_camera[1],
675         .priv           = &mt9t112_info1,
676 };
677
678 static int mt9t112_power2(struct device *dev, int mode)
679 {
680         gpio_set_value(GPIO_PTA4, mode);
681         if (mode)
682                 mdelay(100);
683
684         return 0;
685 }
686
687 static struct mt9t112_camera_info mt9t112_info2 = {
688         .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
689         .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
690 };
691
692 static struct soc_camera_link mt9t112_link2 = {
693         .i2c_adapter_id = 1,
694         .power          = mt9t112_power2,
695         .bus_id         = 1,
696         .board_info     = &i2c_camera[2],
697         .priv           = &mt9t112_info2,
698 };
699
700 static struct platform_device camera_devices[] = {
701         {
702                 .name   = "soc-camera-pdrv",
703                 .id     = 0,
704                 .dev    = {
705                         .platform_data = &tw9910_link,
706                 },
707         },
708         {
709                 .name   = "soc-camera-pdrv",
710                 .id     = 1,
711                 .dev    = {
712                         .platform_data = &mt9t112_link1,
713                 },
714         },
715         {
716                 .name   = "soc-camera-pdrv",
717                 .id     = 2,
718                 .dev    = {
719                         .platform_data = &mt9t112_link2,
720                 },
721         },
722 };
723
724 /* FSI */
725 static struct sh_fsi_platform_info fsi_info = {
726         .portb_flags = SH_FSI_BRS_INV,
727 };
728
729 static struct resource fsi_resources[] = {
730         [0] = {
731                 .name   = "FSI",
732                 .start  = 0xFE3C0000,
733                 .end    = 0xFE3C021d,
734                 .flags  = IORESOURCE_MEM,
735         },
736         [1] = {
737                 .start  = 108,
738                 .flags  = IORESOURCE_IRQ,
739         },
740 };
741
742 static struct platform_device fsi_device = {
743         .name           = "sh_fsi",
744         .id             = 0,
745         .num_resources  = ARRAY_SIZE(fsi_resources),
746         .resource       = fsi_resources,
747         .dev    = {
748                 .platform_data  = &fsi_info,
749         },
750         .archdata = {
751                 .hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */
752         },
753 };
754
755 /* IrDA */
756 static struct resource irda_resources[] = {
757         [0] = {
758                 .name   = "IrDA",
759                 .start  = 0xA45D0000,
760                 .end    = 0xA45D0049,
761                 .flags  = IORESOURCE_MEM,
762         },
763         [1] = {
764                 .start  = 20,
765                 .flags  = IORESOURCE_IRQ,
766         },
767 };
768
769 static struct platform_device irda_device = {
770         .name           = "sh_sir",
771         .num_resources  = ARRAY_SIZE(irda_resources),
772         .resource       = irda_resources,
773 };
774
775 #include <media/ak881x.h>
776 #include <media/sh_vou.h>
777
778 static struct ak881x_pdata ak881x_pdata = {
779         .flags = AK881X_IF_MODE_SLAVE,
780 };
781
782 static struct i2c_board_info ak8813 = {
783         I2C_BOARD_INFO("ak8813", 0x20),
784         .platform_data = &ak881x_pdata,
785 };
786
787 static struct sh_vou_pdata sh_vou_pdata = {
788         .bus_fmt        = SH_VOU_BUS_8BIT,
789         .flags          = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
790         .board_info     = &ak8813,
791         .i2c_adap       = 0,
792 };
793
794 static struct resource sh_vou_resources[] = {
795         [0] = {
796                 .start  = 0xfe960000,
797                 .end    = 0xfe962043,
798                 .flags  = IORESOURCE_MEM,
799         },
800         [1] = {
801                 .start  = 55,
802                 .flags  = IORESOURCE_IRQ,
803         },
804 };
805
806 static struct platform_device vou_device = {
807         .name           = "sh-vou",
808         .id             = -1,
809         .num_resources  = ARRAY_SIZE(sh_vou_resources),
810         .resource       = sh_vou_resources,
811         .dev            = {
812                 .platform_data  = &sh_vou_pdata,
813         },
814         .archdata       = {
815                 .hwblk_id       = HWBLK_VOU,
816         },
817 };
818
819 #if defined(CONFIG_MMC_SH_MMCIF)
820 /* SH_MMCIF */
821 static void mmcif_set_pwr(struct platform_device *pdev, int state)
822 {
823         gpio_set_value(GPIO_PTB7, state);
824 }
825
826 static void mmcif_down_pwr(struct platform_device *pdev)
827 {
828         gpio_set_value(GPIO_PTB7, 0);
829 }
830
831 static struct resource sh_mmcif_resources[] = {
832         [0] = {
833                 .name   = "SH_MMCIF",
834                 .start  = 0xA4CA0000,
835                 .end    = 0xA4CA00FF,
836                 .flags  = IORESOURCE_MEM,
837         },
838         [1] = {
839                 /* MMC2I */
840                 .start  = 29,
841                 .flags  = IORESOURCE_IRQ,
842         },
843         [2] = {
844                 /* MMC3I */
845                 .start  = 30,
846                 .flags  = IORESOURCE_IRQ,
847         },
848 };
849
850 static struct sh_mmcif_plat_data sh_mmcif_plat = {
851         .set_pwr        = mmcif_set_pwr,
852         .down_pwr       = mmcif_down_pwr,
853         .sup_pclk       = 0, /* SH7724: Max Pclk/2 */
854         .caps           = MMC_CAP_4_BIT_DATA |
855                           MMC_CAP_8_BIT_DATA |
856                           MMC_CAP_NEEDS_POLL,
857         .ocr            = MMC_VDD_32_33 | MMC_VDD_33_34,
858 };
859
860 static struct platform_device sh_mmcif_device = {
861         .name           = "sh_mmcif",
862         .id             = 0,
863         .dev            = {
864                 .platform_data          = &sh_mmcif_plat,
865         },
866         .num_resources  = ARRAY_SIZE(sh_mmcif_resources),
867         .resource       = sh_mmcif_resources,
868 };
869 #endif
870
871 static struct platform_device *ecovec_devices[] __initdata = {
872         &heartbeat_device,
873         &nor_flash_device,
874         &sh_eth_device,
875         &usb0_host_device,
876         &usb1_common_device,
877         &lcdc_device,
878         &ceu0_device,
879         &ceu1_device,
880         &keysc_device,
881 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
882         &sdhi0_device,
883 #if !defined(CONFIG_MMC_SH_MMCIF)
884         &sdhi1_device,
885 #endif
886 #else
887         &msiof0_device,
888 #endif
889         &camera_devices[0],
890         &camera_devices[1],
891         &camera_devices[2],
892         &fsi_device,
893         &irda_device,
894         &vou_device,
895 #if defined(CONFIG_MMC_SH_MMCIF)
896         &sh_mmcif_device,
897 #endif
898 };
899
900 #ifdef CONFIG_I2C
901 #define EEPROM_ADDR 0x50
902 static u8 mac_read(struct i2c_adapter *a, u8 command)
903 {
904         struct i2c_msg msg[2];
905         u8 buf;
906         int ret;
907
908         msg[0].addr  = EEPROM_ADDR;
909         msg[0].flags = 0;
910         msg[0].len   = 1;
911         msg[0].buf   = &command;
912
913         msg[1].addr  = EEPROM_ADDR;
914         msg[1].flags = I2C_M_RD;
915         msg[1].len   = 1;
916         msg[1].buf   = &buf;
917
918         ret = i2c_transfer(a, msg, 2);
919         if (ret < 0) {
920                 printk(KERN_ERR "error %d\n", ret);
921                 buf = 0xff;
922         }
923
924         return buf;
925 }
926
927 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
928 {
929         struct i2c_adapter *a = i2c_get_adapter(1);
930         int i;
931
932         if (!a) {
933                 pr_err("can not get I2C 1\n");
934                 return;
935         }
936
937         /* read MAC address frome EEPROM */
938         for (i = 0; i < sizeof(pd->mac_addr); i++) {
939                 pd->mac_addr[i] = mac_read(a, 0x10 + i);
940                 msleep(10);
941         }
942
943         i2c_put_adapter(a);
944 }
945 #else
946 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
947 {
948         pr_err("unable to read sh_eth MAC address\n");
949 }
950 #endif
951
952 #define PORT_HIZA 0xA4050158
953 #define IODRIVEA  0xA405018A
954
955 extern char ecovec24_sdram_enter_start;
956 extern char ecovec24_sdram_enter_end;
957 extern char ecovec24_sdram_leave_start;
958 extern char ecovec24_sdram_leave_end;
959
960 static int __init arch_setup(void)
961 {
962         struct clk *clk;
963
964         /* register board specific self-refresh code */
965         sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
966                                         SUSP_SH_RSTANDBY,
967                                         &ecovec24_sdram_enter_start,
968                                         &ecovec24_sdram_enter_end,
969                                         &ecovec24_sdram_leave_start,
970                                         &ecovec24_sdram_leave_end);
971
972         /* enable STATUS0, STATUS2 and PDSTATUS */
973         gpio_request(GPIO_FN_STATUS0, NULL);
974         gpio_request(GPIO_FN_STATUS2, NULL);
975         gpio_request(GPIO_FN_PDSTATUS, NULL);
976
977         /* enable SCIFA0 */
978         gpio_request(GPIO_FN_SCIF0_TXD, NULL);
979         gpio_request(GPIO_FN_SCIF0_RXD, NULL);
980
981         /* enable debug LED */
982         gpio_request(GPIO_PTG0, NULL);
983         gpio_request(GPIO_PTG1, NULL);
984         gpio_request(GPIO_PTG2, NULL);
985         gpio_request(GPIO_PTG3, NULL);
986         gpio_direction_output(GPIO_PTG0, 0);
987         gpio_direction_output(GPIO_PTG1, 0);
988         gpio_direction_output(GPIO_PTG2, 0);
989         gpio_direction_output(GPIO_PTG3, 0);
990         __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
991
992         /* enable SH-Eth */
993         gpio_request(GPIO_PTA1, NULL);
994         gpio_direction_output(GPIO_PTA1, 1);
995         mdelay(20);
996
997         gpio_request(GPIO_FN_RMII_RXD0,    NULL);
998         gpio_request(GPIO_FN_RMII_RXD1,    NULL);
999         gpio_request(GPIO_FN_RMII_TXD0,    NULL);
1000         gpio_request(GPIO_FN_RMII_TXD1,    NULL);
1001         gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
1002         gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
1003         gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
1004         gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
1005         gpio_request(GPIO_FN_MDIO,         NULL);
1006         gpio_request(GPIO_FN_MDC,          NULL);
1007         gpio_request(GPIO_FN_LNKSTA,       NULL);
1008
1009         /* enable USB */
1010         __raw_writew(0x0000, 0xA4D80000);
1011         __raw_writew(0x0000, 0xA4D90000);
1012         gpio_request(GPIO_PTB3,  NULL);
1013         gpio_request(GPIO_PTB4,  NULL);
1014         gpio_request(GPIO_PTB5,  NULL);
1015         gpio_direction_input(GPIO_PTB3);
1016         gpio_direction_output(GPIO_PTB4, 0);
1017         gpio_direction_output(GPIO_PTB5, 0);
1018         __raw_writew(0x0600, 0xa40501d4);
1019         __raw_writew(0x0600, 0xa4050192);
1020
1021         if (gpio_get_value(GPIO_PTB3)) {
1022                 printk(KERN_INFO "USB1 function is selected\n");
1023                 usb1_common_device.name = "r8a66597_udc";
1024         } else {
1025                 printk(KERN_INFO "USB1 host is selected\n");
1026                 usb1_common_device.name = "r8a66597_hcd";
1027         }
1028
1029         /* enable LCDC */
1030         gpio_request(GPIO_FN_LCDD23,   NULL);
1031         gpio_request(GPIO_FN_LCDD22,   NULL);
1032         gpio_request(GPIO_FN_LCDD21,   NULL);
1033         gpio_request(GPIO_FN_LCDD20,   NULL);
1034         gpio_request(GPIO_FN_LCDD19,   NULL);
1035         gpio_request(GPIO_FN_LCDD18,   NULL);
1036         gpio_request(GPIO_FN_LCDD17,   NULL);
1037         gpio_request(GPIO_FN_LCDD16,   NULL);
1038         gpio_request(GPIO_FN_LCDD15,   NULL);
1039         gpio_request(GPIO_FN_LCDD14,   NULL);
1040         gpio_request(GPIO_FN_LCDD13,   NULL);
1041         gpio_request(GPIO_FN_LCDD12,   NULL);
1042         gpio_request(GPIO_FN_LCDD11,   NULL);
1043         gpio_request(GPIO_FN_LCDD10,   NULL);
1044         gpio_request(GPIO_FN_LCDD9,    NULL);
1045         gpio_request(GPIO_FN_LCDD8,    NULL);
1046         gpio_request(GPIO_FN_LCDD7,    NULL);
1047         gpio_request(GPIO_FN_LCDD6,    NULL);
1048         gpio_request(GPIO_FN_LCDD5,    NULL);
1049         gpio_request(GPIO_FN_LCDD4,    NULL);
1050         gpio_request(GPIO_FN_LCDD3,    NULL);
1051         gpio_request(GPIO_FN_LCDD2,    NULL);
1052         gpio_request(GPIO_FN_LCDD1,    NULL);
1053         gpio_request(GPIO_FN_LCDD0,    NULL);
1054         gpio_request(GPIO_FN_LCDDISP,  NULL);
1055         gpio_request(GPIO_FN_LCDHSYN,  NULL);
1056         gpio_request(GPIO_FN_LCDDCK,   NULL);
1057         gpio_request(GPIO_FN_LCDVSYN,  NULL);
1058         gpio_request(GPIO_FN_LCDDON,   NULL);
1059         gpio_request(GPIO_FN_LCDLCLK,  NULL);
1060         __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
1061
1062         gpio_request(GPIO_PTE6, NULL);
1063         gpio_request(GPIO_PTU1, NULL);
1064         gpio_request(GPIO_PTR1, NULL);
1065         gpio_request(GPIO_PTA2, NULL);
1066         gpio_direction_input(GPIO_PTE6);
1067         gpio_direction_output(GPIO_PTU1, 0);
1068         gpio_direction_output(GPIO_PTR1, 0);
1069         gpio_direction_output(GPIO_PTA2, 0);
1070
1071         /* I/O buffer drive ability is high */
1072         __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
1073
1074         if (gpio_get_value(GPIO_PTE6)) {
1075                 /* DVI */
1076                 lcdc_info.clock_source                  = LCDC_CLK_EXTERNAL;
1077                 lcdc_info.ch[0].clock_divider           = 1;
1078                 lcdc_info.ch[0].lcd_cfg                 = ecovec_dvi_modes;
1079                 lcdc_info.ch[0].num_cfg                 = ARRAY_SIZE(ecovec_dvi_modes);
1080
1081                 gpio_set_value(GPIO_PTA2, 1);
1082                 gpio_set_value(GPIO_PTU1, 1);
1083         } else {
1084                 /* Panel */
1085                 lcdc_info.clock_source                  = LCDC_CLK_PERIPHERAL;
1086                 lcdc_info.ch[0].clock_divider           = 2;
1087                 lcdc_info.ch[0].lcd_cfg                 = ecovec_lcd_modes;
1088                 lcdc_info.ch[0].num_cfg                 = ARRAY_SIZE(ecovec_lcd_modes);
1089
1090                 gpio_set_value(GPIO_PTR1, 1);
1091
1092                 /* FIXME
1093                  *
1094                  * LCDDON control is needed for Panel,
1095                  * but current sh_mobile_lcdc driver doesn't control it.
1096                  * It is temporary correspondence
1097                  */
1098                 gpio_request(GPIO_PTF4, NULL);
1099                 gpio_direction_output(GPIO_PTF4, 1);
1100
1101                 /* enable TouchScreen */
1102                 i2c_register_board_info(0, &ts_i2c_clients, 1);
1103                 set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
1104         }
1105
1106         /* enable CEU0 */
1107         gpio_request(GPIO_FN_VIO0_D15, NULL);
1108         gpio_request(GPIO_FN_VIO0_D14, NULL);
1109         gpio_request(GPIO_FN_VIO0_D13, NULL);
1110         gpio_request(GPIO_FN_VIO0_D12, NULL);
1111         gpio_request(GPIO_FN_VIO0_D11, NULL);
1112         gpio_request(GPIO_FN_VIO0_D10, NULL);
1113         gpio_request(GPIO_FN_VIO0_D9,  NULL);
1114         gpio_request(GPIO_FN_VIO0_D8,  NULL);
1115         gpio_request(GPIO_FN_VIO0_D7,  NULL);
1116         gpio_request(GPIO_FN_VIO0_D6,  NULL);
1117         gpio_request(GPIO_FN_VIO0_D5,  NULL);
1118         gpio_request(GPIO_FN_VIO0_D4,  NULL);
1119         gpio_request(GPIO_FN_VIO0_D3,  NULL);
1120         gpio_request(GPIO_FN_VIO0_D2,  NULL);
1121         gpio_request(GPIO_FN_VIO0_D1,  NULL);
1122         gpio_request(GPIO_FN_VIO0_D0,  NULL);
1123         gpio_request(GPIO_FN_VIO0_VD,  NULL);
1124         gpio_request(GPIO_FN_VIO0_CLK, NULL);
1125         gpio_request(GPIO_FN_VIO0_FLD, NULL);
1126         gpio_request(GPIO_FN_VIO0_HD,  NULL);
1127         platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
1128
1129         /* enable CEU1 */
1130         gpio_request(GPIO_FN_VIO1_D7,  NULL);
1131         gpio_request(GPIO_FN_VIO1_D6,  NULL);
1132         gpio_request(GPIO_FN_VIO1_D5,  NULL);
1133         gpio_request(GPIO_FN_VIO1_D4,  NULL);
1134         gpio_request(GPIO_FN_VIO1_D3,  NULL);
1135         gpio_request(GPIO_FN_VIO1_D2,  NULL);
1136         gpio_request(GPIO_FN_VIO1_D1,  NULL);
1137         gpio_request(GPIO_FN_VIO1_D0,  NULL);
1138         gpio_request(GPIO_FN_VIO1_FLD, NULL);
1139         gpio_request(GPIO_FN_VIO1_HD,  NULL);
1140         gpio_request(GPIO_FN_VIO1_VD,  NULL);
1141         gpio_request(GPIO_FN_VIO1_CLK, NULL);
1142         platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
1143
1144         /* enable KEYSC */
1145         gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
1146         gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
1147         gpio_request(GPIO_FN_KEYOUT3,     NULL);
1148         gpio_request(GPIO_FN_KEYOUT2,     NULL);
1149         gpio_request(GPIO_FN_KEYOUT1,     NULL);
1150         gpio_request(GPIO_FN_KEYOUT0,     NULL);
1151         gpio_request(GPIO_FN_KEYIN0,      NULL);
1152
1153         /* enable user debug switch */
1154         gpio_request(GPIO_PTR0, NULL);
1155         gpio_request(GPIO_PTR4, NULL);
1156         gpio_request(GPIO_PTR5, NULL);
1157         gpio_request(GPIO_PTR6, NULL);
1158         gpio_direction_input(GPIO_PTR0);
1159         gpio_direction_input(GPIO_PTR4);
1160         gpio_direction_input(GPIO_PTR5);
1161         gpio_direction_input(GPIO_PTR6);
1162
1163 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
1164         /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
1165         gpio_request(GPIO_FN_SDHI0CD,  NULL);
1166         gpio_request(GPIO_FN_SDHI0WP,  NULL);
1167         gpio_request(GPIO_FN_SDHI0CMD, NULL);
1168         gpio_request(GPIO_FN_SDHI0CLK, NULL);
1169         gpio_request(GPIO_FN_SDHI0D3,  NULL);
1170         gpio_request(GPIO_FN_SDHI0D2,  NULL);
1171         gpio_request(GPIO_FN_SDHI0D1,  NULL);
1172         gpio_request(GPIO_FN_SDHI0D0,  NULL);
1173         gpio_request(GPIO_PTB6, NULL);
1174         gpio_direction_output(GPIO_PTB6, 0);
1175
1176 #if !defined(CONFIG_MMC_SH_MMCIF)
1177         /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
1178         gpio_request(GPIO_FN_SDHI1CD,  NULL);
1179         gpio_request(GPIO_FN_SDHI1WP,  NULL);
1180         gpio_request(GPIO_FN_SDHI1CMD, NULL);
1181         gpio_request(GPIO_FN_SDHI1CLK, NULL);
1182         gpio_request(GPIO_FN_SDHI1D3,  NULL);
1183         gpio_request(GPIO_FN_SDHI1D2,  NULL);
1184         gpio_request(GPIO_FN_SDHI1D1,  NULL);
1185         gpio_request(GPIO_FN_SDHI1D0,  NULL);
1186         gpio_request(GPIO_PTB7, NULL);
1187         gpio_direction_output(GPIO_PTB7, 0);
1188
1189         /* I/O buffer drive ability is high for SDHI1 */
1190         __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
1191 #endif /* CONFIG_MMC_SH_MMCIF */
1192 #else
1193         /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
1194         gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
1195         gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
1196         gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
1197         gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
1198         gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
1199         gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
1200         gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
1201         gpio_request(GPIO_PTY6, NULL); /* write protect */
1202         gpio_direction_input(GPIO_PTY6);
1203         gpio_request(GPIO_PTY7, NULL); /* card detect */
1204         gpio_direction_input(GPIO_PTY7);
1205
1206         spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
1207 #endif
1208
1209         /* enable Video */
1210         gpio_request(GPIO_PTU2, NULL);
1211         gpio_direction_output(GPIO_PTU2, 1);
1212
1213         /* enable Camera */
1214         gpio_request(GPIO_PTA3, NULL);
1215         gpio_request(GPIO_PTA4, NULL);
1216         gpio_direction_output(GPIO_PTA3, 0);
1217         gpio_direction_output(GPIO_PTA4, 0);
1218
1219         /* enable FSI */
1220         gpio_request(GPIO_FN_FSIMCKB,    NULL);
1221         gpio_request(GPIO_FN_FSIIBSD,    NULL);
1222         gpio_request(GPIO_FN_FSIOBSD,    NULL);
1223         gpio_request(GPIO_FN_FSIIBBCK,   NULL);
1224         gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
1225         gpio_request(GPIO_FN_FSIOBBCK,   NULL);
1226         gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
1227         gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
1228
1229         /* set SPU2 clock to 83.4 MHz */
1230         clk = clk_get(NULL, "spu_clk");
1231         if (!IS_ERR(clk)) {
1232                 clk_set_rate(clk, clk_round_rate(clk, 83333333));
1233                 clk_put(clk);
1234         }
1235
1236         /* change parent of FSI B */
1237         clk = clk_get(NULL, "fsib_clk");
1238         if (!IS_ERR(clk)) {
1239                 /* 48kHz dummy clock was used to make sure 1/1 divide */
1240                 clk_set_rate(&sh7724_fsimckb_clk, 48000);
1241                 clk_set_parent(clk, &sh7724_fsimckb_clk);
1242                 clk_set_rate(clk, 48000);
1243                 clk_put(clk);
1244         }
1245
1246         gpio_request(GPIO_PTU0, NULL);
1247         gpio_direction_output(GPIO_PTU0, 0);
1248         mdelay(20);
1249
1250         /* enable motion sensor */
1251         gpio_request(GPIO_FN_INTC_IRQ1, NULL);
1252         gpio_direction_input(GPIO_FN_INTC_IRQ1);
1253
1254         /* set VPU clock to 166 MHz */
1255         clk = clk_get(NULL, "vpu_clk");
1256         if (!IS_ERR(clk)) {
1257                 clk_set_rate(clk, clk_round_rate(clk, 166000000));
1258                 clk_put(clk);
1259         }
1260
1261         /* enable IrDA */
1262         gpio_request(GPIO_FN_IRDA_OUT, NULL);
1263         gpio_request(GPIO_FN_IRDA_IN,  NULL);
1264         gpio_request(GPIO_PTU5, NULL);
1265         gpio_direction_output(GPIO_PTU5, 0);
1266
1267 #if defined(CONFIG_MMC_SH_MMCIF)
1268         /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
1269         gpio_request(GPIO_FN_MMC_D7, NULL);
1270         gpio_request(GPIO_FN_MMC_D6, NULL);
1271         gpio_request(GPIO_FN_MMC_D5, NULL);
1272         gpio_request(GPIO_FN_MMC_D4, NULL);
1273         gpio_request(GPIO_FN_MMC_D3, NULL);
1274         gpio_request(GPIO_FN_MMC_D2, NULL);
1275         gpio_request(GPIO_FN_MMC_D1, NULL);
1276         gpio_request(GPIO_FN_MMC_D0, NULL);
1277         gpio_request(GPIO_FN_MMC_CLK, NULL);
1278         gpio_request(GPIO_FN_MMC_CMD, NULL);
1279         gpio_request(GPIO_PTB7, NULL);
1280         gpio_direction_output(GPIO_PTB7, 0);
1281
1282         /* I/O buffer drive ability is high for MMCIF */
1283         __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
1284 #endif
1285
1286         /* enable I2C device */
1287         i2c_register_board_info(0, i2c0_devices,
1288                                 ARRAY_SIZE(i2c0_devices));
1289
1290         i2c_register_board_info(1, i2c1_devices,
1291                                 ARRAY_SIZE(i2c1_devices));
1292
1293         /* VOU */
1294         gpio_request(GPIO_FN_DV_D15, NULL);
1295         gpio_request(GPIO_FN_DV_D14, NULL);
1296         gpio_request(GPIO_FN_DV_D13, NULL);
1297         gpio_request(GPIO_FN_DV_D12, NULL);
1298         gpio_request(GPIO_FN_DV_D11, NULL);
1299         gpio_request(GPIO_FN_DV_D10, NULL);
1300         gpio_request(GPIO_FN_DV_D9, NULL);
1301         gpio_request(GPIO_FN_DV_D8, NULL);
1302         gpio_request(GPIO_FN_DV_CLKI, NULL);
1303         gpio_request(GPIO_FN_DV_CLK, NULL);
1304         gpio_request(GPIO_FN_DV_VSYNC, NULL);
1305         gpio_request(GPIO_FN_DV_HSYNC, NULL);
1306
1307         /* AK8813 power / reset sequence */
1308         gpio_request(GPIO_PTG4, NULL);
1309         gpio_request(GPIO_PTU3, NULL);
1310         /* Reset */
1311         gpio_direction_output(GPIO_PTG4, 0);
1312         /* Power down */
1313         gpio_direction_output(GPIO_PTU3, 1);
1314
1315         udelay(10);
1316
1317         /* Power up, reset */
1318         gpio_set_value(GPIO_PTU3, 0);
1319
1320         udelay(10);
1321
1322         /* Remove reset */
1323         gpio_set_value(GPIO_PTG4, 1);
1324
1325         return platform_add_devices(ecovec_devices,
1326                                     ARRAY_SIZE(ecovec_devices));
1327 }
1328 arch_initcall(arch_setup);
1329
1330 static int __init devices_setup(void)
1331 {
1332         sh_eth_init(&sh_eth_plat);
1333         return 0;
1334 }
1335 device_initcall(devices_setup);
1336
1337 static struct sh_machine_vector mv_ecovec __initmv = {
1338         .mv_name        = "R0P7724 (EcoVec)",
1339 };