Pileus Git - ~andy/linux/blob - arch/arm/mm/mmu.c

   1 /*
   2  *  linux/arch/arm/mm/mmu.c
   3  *
   4  *  Copyright (C) 1995-2005 Russell King
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 #include <linux/module.h>
  11 #include <linux/kernel.h>
  12 #include <linux/errno.h>
  13 #include <linux/init.h>
  14 #include <linux/mman.h>
  15 #include <linux/nodemask.h>
  16 #include <linux/memblock.h>
  17 #include <linux/fs.h>
  18 #include <linux/vmalloc.h>
  19
  20 #include <asm/cp15.h>
  21 #include <asm/cputype.h>
  22 #include <asm/sections.h>
  23 #include <asm/cachetype.h>
  24 #include <asm/setup.h>
  25 #include <asm/sizes.h>
  26 #include <asm/smp_plat.h>
  27 #include <asm/tlb.h>
  28 #include <asm/highmem.h>
  29 #include <asm/system_info.h>
  30 #include <asm/traps.h>
  31
  32 #include <asm/mach/arch.h>
  33 #include <asm/mach/map.h>
  34
  35 #include "mm.h"
  36
  37 /*
  38  * empty_zero_page is a special page that is used for
  39  * zero-initialized data and COW.
  40  */
  41 struct page *empty_zero_page;
  42 EXPORT_SYMBOL(empty_zero_page);
  43
  44 /*
  45  * The pmd table for the upper-most set of pages.
  46  */
  47 pmd_t *top_pmd;
  48
  49 #define CPOLICY_UNCACHED        0
  50 #define CPOLICY_BUFFERED        1
  51 #define CPOLICY_WRITETHROUGH    2
  52 #define CPOLICY_WRITEBACK       3
  53 #define CPOLICY_WRITEALLOC      4
  54
  55 static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
  56 static unsigned int ecc_mask __initdata = 0;
  57 pgprot_t pgprot_user;
  58 pgprot_t pgprot_kernel;
  59
  60 EXPORT_SYMBOL(pgprot_user);
  61 EXPORT_SYMBOL(pgprot_kernel);
  62
  63 struct cachepolicy {
  64         const char      policy[16];
  65         unsigned int    cr_mask;
  66         pmdval_t        pmd;
  67         pteval_t        pte;
  68 };
  69
  70 static struct cachepolicy cache_policies[] __initdata = {
  71         {
  72                 .policy         = "uncached",
  73                 .cr_mask        = CR_W|CR_C,
  74                 .pmd            = PMD_SECT_UNCACHED,
  75                 .pte            = L_PTE_MT_UNCACHED,
  76         }, {
  77                 .policy         = "buffered",
  78                 .cr_mask        = CR_C,
  79                 .pmd            = PMD_SECT_BUFFERED,
  80                 .pte            = L_PTE_MT_BUFFERABLE,
  81         }, {
  82                 .policy         = "writethrough",
  83                 .cr_mask        = 0,
  84                 .pmd            = PMD_SECT_WT,
  85                 .pte            = L_PTE_MT_WRITETHROUGH,
  86         }, {
  87                 .policy         = "writeback",
  88                 .cr_mask        = 0,
  89                 .pmd            = PMD_SECT_WB,
  90                 .pte            = L_PTE_MT_WRITEBACK,
  91         }, {
  92                 .policy         = "writealloc",
  93                 .cr_mask        = 0,
  94                 .pmd            = PMD_SECT_WBWA,
  95                 .pte            = L_PTE_MT_WRITEALLOC,
  96         }
  97 };
  98
  99 /*
 100  * These are useful for identifying cache coherency
 101  * problems by allowing the cache or the cache and
 102  * writebuffer to be turned off.  (Note: the write
 103  * buffer should not be on and the cache off).
 104  */
 105 static int __init early_cachepolicy(char *p)
 106 {
 107         int i;
 108
 109         for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
 110                 int len = strlen(cache_policies[i].policy);
 111
 112                 if (memcmp(p, cache_policies[i].policy, len) == 0) {
 113                         cachepolicy = i;
 114                         cr_alignment &= ~cache_policies[i].cr_mask;
 115                         cr_no_alignment &= ~cache_policies[i].cr_mask;
 116                         break;
 117                 }
 118         }
 119         if (i == ARRAY_SIZE(cache_policies))
 120                 printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
 121         /*
 122          * This restriction is partly to do with the way we boot; it is
 123          * unpredictable to have memory mapped using two different sets of
 124          * memory attributes (shared, type, and cache attribs).  We can not
 125          * change these attributes once the initial assembly has setup the
 126          * page tables.
 127          */
 128         if (cpu_architecture() >= CPU_ARCH_ARMv6) {
 129                 printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n");
 130                 cachepolicy = CPOLICY_WRITEBACK;
 131         }
 132         flush_cache_all();
 133         set_cr(cr_alignment);
 134         return 0;
 135 }
 136 early_param("cachepolicy", early_cachepolicy);
 137
 138 static int __init early_nocache(char *__unused)
 139 {
 140         char *p = "buffered";
 141         printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
 142         early_cachepolicy(p);
 143         return 0;
 144 }
 145 early_param("nocache", early_nocache);
 146
 147 static int __init early_nowrite(char *__unused)
 148 {
 149         char *p = "uncached";
 150         printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
 151         early_cachepolicy(p);
 152         return 0;
 153 }
 154 early_param("nowb", early_nowrite);
 155
 156 #ifndef CONFIG_ARM_LPAE
 157 static int __init early_ecc(char *p)
 158 {
 159         if (memcmp(p, "on", 2) == 0)
 160                 ecc_mask = PMD_PROTECTION;
 161         else if (memcmp(p, "off", 3) == 0)
 162                 ecc_mask = 0;
 163         return 0;
 164 }
 165 early_param("ecc", early_ecc);
 166 #endif
 167
 168 static int __init noalign_setup(char *__unused)
 169 {
 170         cr_alignment &= ~CR_A;
 171         cr_no_alignment &= ~CR_A;
 172         set_cr(cr_alignment);
 173         return 1;
 174 }
 175 __setup("noalign", noalign_setup);
 176
 177 #ifndef CONFIG_SMP
 178 void adjust_cr(unsigned long mask, unsigned long set)
 179 {
 180         unsigned long flags;
 181
 182         mask &= ~CR_A;
 183
 184         set &= mask;
 185
 186         local_irq_save(flags);
 187
 188         cr_no_alignment = (cr_no_alignment & ~mask) | set;
 189         cr_alignment = (cr_alignment & ~mask) | set;
 190
 191         set_cr((get_cr() & ~mask) | set);
 192
 193         local_irq_restore(flags);
 194 }
 195 #endif
 196
 197 #define PROT_PTE_DEVICE         L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN
 198 #define PROT_SECT_DEVICE        PMD_TYPE_SECT|PMD_SECT_AP_WRITE
 199
 200 static struct mem_type mem_types[] = {
 201         [MT_DEVICE] = {           /* Strongly ordered / ARMv6 shared device */
 202                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
 203                                   L_PTE_SHARED,
 204                 .prot_l1        = PMD_TYPE_TABLE,
 205                 .prot_sect      = PROT_SECT_DEVICE | PMD_SECT_S,
 206                 .domain         = DOMAIN_IO,
 207         },
 208         [MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */
 209                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED,
 210                 .prot_l1        = PMD_TYPE_TABLE,
 211                 .prot_sect      = PROT_SECT_DEVICE,
 212                 .domain         = DOMAIN_IO,
 213         },
 214         [MT_DEVICE_CACHED] = {    /* ioremap_cached */
 215                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_CACHED,
 216                 .prot_l1        = PMD_TYPE_TABLE,
 217                 .prot_sect      = PROT_SECT_DEVICE | PMD_SECT_WB,
 218                 .domain         = DOMAIN_IO,
 219         },
 220         [MT_DEVICE_WC] = {      /* ioremap_wc */
 221                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
 222                 .prot_l1        = PMD_TYPE_TABLE,
 223                 .prot_sect      = PROT_SECT_DEVICE,
 224                 .domain         = DOMAIN_IO,
 225         },
 226         [MT_UNCACHED] = {
 227                 .prot_pte       = PROT_PTE_DEVICE,
 228                 .prot_l1        = PMD_TYPE_TABLE,
 229                 .prot_sect      = PMD_TYPE_SECT | PMD_SECT_XN,
 230                 .domain         = DOMAIN_IO,
 231         },
 232         [MT_CACHECLEAN] = {
 233                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 234                 .domain    = DOMAIN_KERNEL,
 235         },
 236 #ifndef CONFIG_ARM_LPAE
 237         [MT_MINICLEAN] = {
 238                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
 239                 .domain    = DOMAIN_KERNEL,
 240         },
 241 #endif
 242         [MT_LOW_VECTORS] = {
 243                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 244                                 L_PTE_RDONLY,
 245                 .prot_l1   = PMD_TYPE_TABLE,
 246                 .domain    = DOMAIN_USER,
 247         },
 248         [MT_HIGH_VECTORS] = {
 249                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 250                                 L_PTE_USER | L_PTE_RDONLY,
 251                 .prot_l1   = PMD_TYPE_TABLE,
 252                 .domain    = DOMAIN_USER,
 253         },
 254         [MT_MEMORY] = {
 255                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 256                 .prot_l1   = PMD_TYPE_TABLE,
 257                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 258                 .domain    = DOMAIN_KERNEL,
 259         },
 260         [MT_ROM] = {
 261                 .prot_sect = PMD_TYPE_SECT,
 262                 .domain    = DOMAIN_KERNEL,
 263         },
 264         [MT_MEMORY_NONCACHED] = {
 265                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 266                                 L_PTE_MT_BUFFERABLE,
 267                 .prot_l1   = PMD_TYPE_TABLE,
 268                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 269                 .domain    = DOMAIN_KERNEL,
 270         },
 271         [MT_MEMORY_DTCM] = {
 272                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 273                                 L_PTE_XN,
 274                 .prot_l1   = PMD_TYPE_TABLE,
 275                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 276                 .domain    = DOMAIN_KERNEL,
 277         },
 278         [MT_MEMORY_ITCM] = {
 279                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 280                 .prot_l1   = PMD_TYPE_TABLE,
 281                 .domain    = DOMAIN_KERNEL,
 282         },
 283         [MT_MEMORY_SO] = {
 284                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 285                                 L_PTE_MT_UNCACHED,
 286                 .prot_l1   = PMD_TYPE_TABLE,
 287                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
 288                                 PMD_SECT_UNCACHED | PMD_SECT_XN,
 289                 .domain    = DOMAIN_KERNEL,
 290         },
 291         [MT_MEMORY_DMA_READY] = {
 292                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 293                 .prot_l1   = PMD_TYPE_TABLE,
 294                 .domain    = DOMAIN_KERNEL,
 295         },
 296 };
 297
 298 const struct mem_type *get_mem_type(unsigned int type)
 299 {
 300         return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
 301 }
 302 EXPORT_SYMBOL(get_mem_type);
 303
 304 /*
 305  * Adjust the PMD section entries according to the CPU in use.
 306  */
 307 static void __init build_mem_type_table(void)
 308 {
 309         struct cachepolicy *cp;
 310         unsigned int cr = get_cr();
 311         pteval_t user_pgprot, kern_pgprot, vecs_pgprot;
 312         int cpu_arch = cpu_architecture();
 313         int i;
 314
 315         if (cpu_arch < CPU_ARCH_ARMv6) {
 316 #if defined(CONFIG_CPU_DCACHE_DISABLE)
 317                 if (cachepolicy > CPOLICY_BUFFERED)
 318                         cachepolicy = CPOLICY_BUFFERED;
 319 #elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
 320                 if (cachepolicy > CPOLICY_WRITETHROUGH)
 321                         cachepolicy = CPOLICY_WRITETHROUGH;
 322 #endif
 323         }
 324         if (cpu_arch < CPU_ARCH_ARMv5) {
 325                 if (cachepolicy >= CPOLICY_WRITEALLOC)
 326                         cachepolicy = CPOLICY_WRITEBACK;
 327                 ecc_mask = 0;
 328         }
 329         if (is_smp())
 330                 cachepolicy = CPOLICY_WRITEALLOC;
 331
 332         /*
 333          * Strip out features not present on earlier architectures.
 334          * Pre-ARMv5 CPUs don't have TEX bits.  Pre-ARMv6 CPUs or those
 335          * without extended page tables don't have the 'Shared' bit.
 336          */
 337         if (cpu_arch < CPU_ARCH_ARMv5)
 338                 for (i = 0; i < ARRAY_SIZE(mem_types); i++)
 339                         mem_types[i].prot_sect &= ~PMD_SECT_TEX(7);
 340         if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3())
 341                 for (i = 0; i < ARRAY_SIZE(mem_types); i++)
 342                         mem_types[i].prot_sect &= ~PMD_SECT_S;
 343
 344         /*
 345          * ARMv5 and lower, bit 4 must be set for page tables (was: cache
 346          * "update-able on write" bit on ARM610).  However, Xscale and
 347          * Xscale3 require this bit to be cleared.
 348          */
 349         if (cpu_is_xscale() || cpu_is_xsc3()) {
 350                 for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 351                         mem_types[i].prot_sect &= ~PMD_BIT4;
 352                         mem_types[i].prot_l1 &= ~PMD_BIT4;
 353                 }
 354         } else if (cpu_arch < CPU_ARCH_ARMv6) {
 355                 for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 356                         if (mem_types[i].prot_l1)
 357                                 mem_types[i].prot_l1 |= PMD_BIT4;
 358                         if (mem_types[i].prot_sect)
 359                                 mem_types[i].prot_sect |= PMD_BIT4;
 360                 }
 361         }
 362
 363         /*
 364          * Mark the device areas according to the CPU/architecture.
 365          */
 366         if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) {
 367                 if (!cpu_is_xsc3()) {
 368                         /*
 369                          * Mark device regions on ARMv6+ as execute-never
 370                          * to prevent speculative instruction fetches.
 371                          */
 372                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN;
 373                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN;
 374                         mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN;
 375                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN;
 376                 }
 377                 if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 378                         /*
 379                          * For ARMv7 with TEX remapping,
 380                          * - shared device is SXCB=1100
 381                          * - nonshared device is SXCB=0100
 382                          * - write combine device mem is SXCB=0001
 383                          * (Uncached Normal memory)
 384                          */
 385                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1);
 386                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1);
 387                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
 388                 } else if (cpu_is_xsc3()) {
 389                         /*
 390                          * For Xscale3,
 391                          * - shared device is TEXCB=00101
 392                          * - nonshared device is TEXCB=01000
 393                          * - write combine device mem is TEXCB=00100
 394                          * (Inner/Outer Uncacheable in xsc3 parlance)
 395                          */
 396                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED;
 397                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
 398                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
 399                 } else {
 400                         /*
 401                          * For ARMv6 and ARMv7 without TEX remapping,
 402                          * - shared device is TEXCB=00001
 403                          * - nonshared device is TEXCB=01000
 404                          * - write combine device mem is TEXCB=00100
 405                          * (Uncached Normal in ARMv6 parlance).
 406                          */
 407                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
 408                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
 409                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
 410                 }
 411         } else {
 412                 /*
 413                  * On others, write combining is "Uncached/Buffered"
 414                  */
 415                 mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
 416         }
 417
 418         /*
 419          * Now deal with the memory-type mappings
 420          */
 421         cp = &cache_policies[cachepolicy];
 422         vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
 423
 424         /*
 425          * Only use write-through for non-SMP systems
 426          */
 427         if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
 428                 vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte;
 429
 430         /*
 431          * Enable CPU-specific coherency if supported.
 432          * (Only available on XSC3 at the moment.)
 433          */
 434         if (arch_is_coherent() && cpu_is_xsc3()) {
 435                 mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 436                 mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
 437                 mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 438                 mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 439                 mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 440         }
 441         /*
 442          * ARMv6 and above have extended page tables.
 443          */
 444         if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
 445 #ifndef CONFIG_ARM_LPAE
 446                 /*
 447                  * Mark cache clean areas and XIP ROM read only
 448                  * from SVC mode and no access from userspace.
 449                  */
 450                 mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 451                 mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 452                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 453 #endif
 454
 455                 if (is_smp()) {
 456                         /*
 457                          * Mark memory with the "shared" attribute
 458                          * for SMP systems
 459                          */
 460                         user_pgprot |= L_PTE_SHARED;
 461                         kern_pgprot |= L_PTE_SHARED;
 462                         vecs_pgprot |= L_PTE_SHARED;
 463                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
 464                         mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
 465                         mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
 466                         mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
 467                         mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 468                         mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
 469                         mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 470                         mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 471                         mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 472                 }
 473         }
 474
 475         /*
 476          * Non-cacheable Normal - intended for memory areas that must
 477          * not cause dirty cache line writebacks when used
 478          */
 479         if (cpu_arch >= CPU_ARCH_ARMv6) {
 480                 if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 481                         /* Non-cacheable Normal is XCB = 001 */
 482                         mem_types[MT_MEMORY_NONCACHED].prot_sect |=
 483                                 PMD_SECT_BUFFERED;
 484                 } else {
 485                         /* For both ARMv6 and non-TEX-remapping ARMv7 */
 486                         mem_types[MT_MEMORY_NONCACHED].prot_sect |=
 487                                 PMD_SECT_TEX(1);
 488                 }
 489         } else {
 490                 mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
 491         }
 492
 493 #ifdef CONFIG_ARM_LPAE
 494         /*
 495          * Do not generate access flag faults for the kernel mappings.
 496          */
 497         for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 498                 mem_types[i].prot_pte |= PTE_EXT_AF;
 499                 if (mem_types[i].prot_sect)
 500                         mem_types[i].prot_sect |= PMD_SECT_AF;
 501         }
 502         kern_pgprot |= PTE_EXT_AF;
 503         vecs_pgprot |= PTE_EXT_AF;
 504 #endif
 505
 506         for (i = 0; i < 16; i++) {
 507                 unsigned long v = pgprot_val(protection_map[i]);
 508                 protection_map[i] = __pgprot(v | user_pgprot);
 509         }
 510
 511         mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot;
 512         mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot;
 513
 514         pgprot_user   = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
 515         pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
 516                                  L_PTE_DIRTY | kern_pgprot);
 517
 518         mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 519         mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
 520         mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
 521         mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
 522         mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
 523         mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
 524         mem_types[MT_ROM].prot_sect |= cp->pmd;
 525
 526         switch (cp->pmd) {
 527         case PMD_SECT_WT:
 528                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
 529                 break;
 530         case PMD_SECT_WB:
 531         case PMD_SECT_WBWA:
 532                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
 533                 break;
 534         }
 535         printk("Memory policy: ECC %sabled, Data cache %s\n",
 536                 ecc_mask ? "en" : "dis", cp->policy);
 537
 538         for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 539                 struct mem_type *t = &mem_types[i];
 540                 if (t->prot_l1)
 541                         t->prot_l1 |= PMD_DOMAIN(t->domain);
 542                 if (t->prot_sect)
 543                         t->prot_sect |= PMD_DOMAIN(t->domain);
 544         }
 545 }
 546
 547 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 548 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 549                               unsigned long size, pgprot_t vma_prot)
 550 {
 551         if (!pfn_valid(pfn))
 552                 return pgprot_noncached(vma_prot);
 553         else if (file->f_flags & O_SYNC)
 554                 return pgprot_writecombine(vma_prot);
 555         return vma_prot;
 556 }
 557 EXPORT_SYMBOL(phys_mem_access_prot);
 558 #endif
 559
 560 #define vectors_base()  (vectors_high() ? 0xffff0000 : 0)
 561
 562 static void __init *early_alloc_aligned(unsigned long sz, unsigned long align)
 563 {
 564         void *ptr = __va(memblock_alloc(sz, align));
 565         memset(ptr, 0, sz);
 566         return ptr;
 567 }
 568
 569 static void __init *early_alloc(unsigned long sz)
 570 {
 571         return early_alloc_aligned(sz, sz);
 572 }
 573
 574 static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
 575 {
 576         if (pmd_none(*pmd)) {
 577                 pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
 578                 __pmd_populate(pmd, __pa(pte), prot);
 579         }
 580         BUG_ON(pmd_bad(*pmd));
 581         return pte_offset_kernel(pmd, addr);
 582 }
 583
 584 static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 585                                   unsigned long end, unsigned long pfn,
 586                                   const struct mem_type *type)
 587 {
 588         pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
 589         do {
 590                 set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
 591                 pfn++;
 592         } while (pte++, addr += PAGE_SIZE, addr != end);
 593 }
 594
 595 static void __init alloc_init_section(pud_t *pud, unsigned long addr,
 596                                       unsigned long end, phys_addr_t phys,
 597                                       const struct mem_type *type)
 598 {
 599         pmd_t *pmd = pmd_offset(pud, addr);
 600
 601         /*
 602          * Try a section mapping - end, addr and phys must all be aligned
 603          * to a section boundary.  Note that PMDs refer to the individual
 604          * L1 entries, whereas PGDs refer to a group of L1 entries making
 605          * up one logical pointer to an L2 table.
 606          */
 607         if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
 608                 pmd_t *p = pmd;
 609
 610 #ifndef CONFIG_ARM_LPAE
 611                 if (addr & SECTION_SIZE)
 612                         pmd++;
 613 #endif
 614
 615                 do {
 616                         *pmd = __pmd(phys | type->prot_sect);
 617                         phys += SECTION_SIZE;
 618                 } while (pmd++, addr += SECTION_SIZE, addr != end);
 619
 620                 flush_pmd_entry(p);
 621         } else {
 622                 /*
 623                  * No need to loop; pte's aren't interested in the
 624                  * individual L1 entries.
 625                  */
 626                 alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
 627         }
 628 }
 629
 630 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 631         unsigned long end, unsigned long phys, const struct mem_type *type)
 632 {
 633         pud_t *pud = pud_offset(pgd, addr);
 634         unsigned long next;
 635
 636         do {
 637                 next = pud_addr_end(addr, end);
 638                 alloc_init_section(pud, addr, next, phys, type);
 639                 phys += next - addr;
 640         } while (pud++, addr = next, addr != end);
 641 }
 642
 643 #ifndef CONFIG_ARM_LPAE
 644 static void __init create_36bit_mapping(struct map_desc *md,
 645                                         const struct mem_type *type)
 646 {
 647         unsigned long addr, length, end;
 648         phys_addr_t phys;
 649         pgd_t *pgd;
 650
 651         addr = md->virtual;
 652         phys = __pfn_to_phys(md->pfn);
 653         length = PAGE_ALIGN(md->length);
 654
 655         if (!(cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())) {
 656                 printk(KERN_ERR "MM: CPU does not support supersection "
 657                        "mapping for 0x%08llx at 0x%08lx\n",
 658                        (long long)__pfn_to_phys((u64)md->pfn), addr);
 659                 return;
 660         }
 661
 662         /* N.B. ARMv6 supersections are only defined to work with domain 0.
 663          *      Since domain assignments can in fact be arbitrary, the
 664          *      'domain == 0' check below is required to insure that ARMv6
 665          *      supersections are only allocated for domain 0 regardless
 666          *      of the actual domain assignments in use.
 667          */
 668         if (type->domain) {
 669                 printk(KERN_ERR "MM: invalid domain in supersection "
 670                        "mapping for 0x%08llx at 0x%08lx\n",
 671                        (long long)__pfn_to_phys((u64)md->pfn), addr);
 672                 return;
 673         }
 674
 675         if ((addr | length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) {
 676                 printk(KERN_ERR "MM: cannot create mapping for 0x%08llx"
 677                        " at 0x%08lx invalid alignment\n",
 678                        (long long)__pfn_to_phys((u64)md->pfn), addr);
 679                 return;
 680         }
 681
 682         /*
 683          * Shift bits [35:32] of address into bits [23:20] of PMD
 684          * (See ARMv6 spec).
 685          */
 686         phys |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
 687
 688         pgd = pgd_offset_k(addr);
 689         end = addr + length;
 690         do {
 691                 pud_t *pud = pud_offset(pgd, addr);
 692                 pmd_t *pmd = pmd_offset(pud, addr);
 693                 int i;
 694
 695                 for (i = 0; i < 16; i++)
 696                         *pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER);
 697
 698                 addr += SUPERSECTION_SIZE;
 699                 phys += SUPERSECTION_SIZE;
 700                 pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
 701         } while (addr != end);
 702 }
 703 #endif  /* !CONFIG_ARM_LPAE */
 704
 705 /*
 706  * Create the page directory entries and any necessary
 707  * page tables for the mapping specified by `md'.  We
 708  * are able to cope here with varying sizes and address
 709  * offsets, and we take full advantage of sections and
 710  * supersections.
 711  */
 712 static void __init create_mapping(struct map_desc *md)
 713 {
 714         unsigned long addr, length, end;
 715         phys_addr_t phys;
 716         const struct mem_type *type;
 717         pgd_t *pgd;
 718
 719         if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
 720                 printk(KERN_WARNING "BUG: not creating mapping for 0x%08llx"
 721                        " at 0x%08lx in user region\n",
 722                        (long long)__pfn_to_phys((u64)md->pfn), md->virtual);
 723                 return;
 724         }
 725
 726         if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
 727             md->virtual >= PAGE_OFFSET &&
 728             (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
 729                 printk(KERN_WARNING "BUG: mapping for 0x%08llx"
 730                        " at 0x%08lx out of vmalloc space\n",
 731                        (long long)__pfn_to_phys((u64)md->pfn), md->virtual);
 732         }
 733
 734         type = &mem_types[md->type];
 735
 736 #ifndef CONFIG_ARM_LPAE
 737         /*
 738          * Catch 36-bit addresses
 739          */
 740         if (md->pfn >= 0x100000) {
 741                 create_36bit_mapping(md, type);
 742                 return;
 743         }
 744 #endif
 745
 746         addr = md->virtual & PAGE_MASK;
 747         phys = __pfn_to_phys(md->pfn);
 748         length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
 749
 750         if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
 751                 printk(KERN_WARNING "BUG: map for 0x%08llx at 0x%08lx can not "
 752                        "be mapped using pages, ignoring.\n",
 753                        (long long)__pfn_to_phys(md->pfn), addr);
 754                 return;
 755         }
 756
 757         pgd = pgd_offset_k(addr);
 758         end = addr + length;
 759         do {
 760                 unsigned long next = pgd_addr_end(addr, end);
 761
 762                 alloc_init_pud(pgd, addr, next, phys, type);
 763
 764                 phys += next - addr;
 765                 addr = next;
 766         } while (pgd++, addr != end);
 767 }
 768
 769 /*
 770  * Create the architecture specific mappings
 771  */
 772 void __init iotable_init(struct map_desc *io_desc, int nr)
 773 {
 774         struct map_desc *md;
 775         struct vm_struct *vm;
 776
 777         if (!nr)
 778                 return;
 779
 780         vm = early_alloc_aligned(sizeof(*vm) * nr, __alignof__(*vm));
 781
 782         for (md = io_desc; nr; md++, nr--) {
 783                 create_mapping(md);
 784                 vm->addr = (void *)(md->virtual & PAGE_MASK);
 785                 vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
 786                 vm->phys_addr = __pfn_to_phys(md->pfn);
 787                 vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
 788                 vm->flags |= VM_ARM_MTYPE(md->type);
 789                 vm->caller = iotable_init;
 790                 vm_area_add_early(vm++);
 791         }
 792 }
 793
 794 #ifndef CONFIG_ARM_LPAE
 795
 796 /*
 797  * The Linux PMD is made of two consecutive section entries covering 2MB
 798  * (see definition in include/asm/pgtable-2level.h).  However a call to
 799  * create_mapping() may optimize static mappings by using individual
 800  * 1MB section mappings.  This leaves the actual PMD potentially half
 801  * initialized if the top or bottom section entry isn't used, leaving it
 802  * open to problems if a subsequent ioremap() or vmalloc() tries to use
 803  * the virtual space left free by that unused section entry.
 804  *
 805  * Let's avoid the issue by inserting dummy vm entries covering the unused
 806  * PMD halves once the static mappings are in place.
 807  */
 808
 809 static void __init pmd_empty_section_gap(unsigned long addr)
 810 {
 811         struct vm_struct *vm;
 812
 813         vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
 814         vm->addr = (void *)addr;
 815         vm->size = SECTION_SIZE;
 816         vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
 817         vm->caller = pmd_empty_section_gap;
 818         vm_area_add_early(vm);
 819 }
 820
 821 static void __init fill_pmd_gaps(void)
 822 {
 823         struct vm_struct *vm;
 824         unsigned long addr, next = 0;
 825         pmd_t *pmd;
 826
 827         /* we're still single threaded hence no lock needed here */
 828         for (vm = vmlist; vm; vm = vm->next) {
 829                 if (!(vm->flags & VM_ARM_STATIC_MAPPING))
 830                         continue;
 831                 addr = (unsigned long)vm->addr;
 832                 if (addr < next)
 833                         continue;
 834
 835                 /*
 836                  * Check if this vm starts on an odd section boundary.
 837                  * If so and the first section entry for this PMD is free
 838                  * then we block the corresponding virtual address.
 839                  */
 840                 if ((addr & ~PMD_MASK) == SECTION_SIZE) {
 841                         pmd = pmd_off_k(addr);
 842                         if (pmd_none(*pmd))
 843                                 pmd_empty_section_gap(addr & PMD_MASK);
 844                 }
 845
 846                 /*
 847                  * Then check if this vm ends on an odd section boundary.
 848                  * If so and the second section entry for this PMD is empty
 849                  * then we block the corresponding virtual address.
 850                  */
 851                 addr += vm->size;
 852                 if ((addr & ~PMD_MASK) == SECTION_SIZE) {
 853                         pmd = pmd_off_k(addr) + 1;
 854                         if (pmd_none(*pmd))
 855                                 pmd_empty_section_gap(addr);
 856                 }
 857
 858                 /* no need to look at any vm entry until we hit the next PMD */
 859                 next = (addr + PMD_SIZE - 1) & PMD_MASK;
 860         }
 861 }
 862
 863 #else
 864 #define fill_pmd_gaps() do { } while (0)
 865 #endif
 866
 867 static void * __initdata vmalloc_min =
 868         (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
 869
 870 /*
 871  * vmalloc=size forces the vmalloc area to be exactly 'size'
 872  * bytes. This can be used to increase (or decrease) the vmalloc
 873  * area - the default is 240m.
 874  */
 875 static int __init early_vmalloc(char *arg)
 876 {
 877         unsigned long vmalloc_reserve = memparse(arg, NULL);
 878
 879         if (vmalloc_reserve < SZ_16M) {
 880                 vmalloc_reserve = SZ_16M;
 881                 printk(KERN_WARNING
 882                         "vmalloc area too small, limiting to %luMB\n",
 883                         vmalloc_reserve >> 20);
 884         }
 885
 886         if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
 887                 vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
 888                 printk(KERN_WARNING
 889                         "vmalloc area is too big, limiting to %luMB\n",
 890                         vmalloc_reserve >> 20);
 891         }
 892
 893         vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
 894         return 0;
 895 }
 896 early_param("vmalloc", early_vmalloc);
 897
 898 phys_addr_t arm_lowmem_limit __initdata = 0;
 899
 900 void __init sanity_check_meminfo(void)
 901 {
 902         int i, j, highmem = 0;
 903
 904         for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
 905                 struct membank *bank = &meminfo.bank[j];
 906                 *bank = meminfo.bank[i];
 907
 908                 if (bank->start > ULONG_MAX)
 909                         highmem = 1;
 910
 911 #ifdef CONFIG_HIGHMEM
 912                 if (__va(bank->start) >= vmalloc_min ||
 913                     __va(bank->start) < (void *)PAGE_OFFSET)
 914                         highmem = 1;
 915
 916                 bank->highmem = highmem;
 917
 918                 /*
 919                  * Split those memory banks which are partially overlapping
 920                  * the vmalloc area greatly simplifying things later.
 921                  */
 922                 if (!highmem && __va(bank->start) < vmalloc_min &&
 923                     bank->size > vmalloc_min - __va(bank->start)) {
 924                         if (meminfo.nr_banks >= NR_BANKS) {
 925                                 printk(KERN_CRIT "NR_BANKS too low, "
 926                                                  "ignoring high memory\n");
 927                         } else {
 928                                 memmove(bank + 1, bank,
 929                                         (meminfo.nr_banks - i) * sizeof(*bank));
 930                                 meminfo.nr_banks++;
 931                                 i++;
 932                                 bank[1].size -= vmalloc_min - __va(bank->start);
 933                                 bank[1].start = __pa(vmalloc_min - 1) + 1;
 934                                 bank[1].highmem = highmem = 1;
 935                                 j++;
 936                         }
 937                         bank->size = vmalloc_min - __va(bank->start);
 938                 }
 939 #else
 940                 bank->highmem = highmem;
 941
 942                 /*
 943                  * Highmem banks not allowed with !CONFIG_HIGHMEM.
 944                  */
 945                 if (highmem) {
 946                         printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
 947                                "(!CONFIG_HIGHMEM).\n",
 948                                (unsigned long long)bank->start,
 949                                (unsigned long long)bank->start + bank->size - 1);
 950                         continue;
 951                 }
 952
 953                 /*
 954                  * Check whether this memory bank would entirely overlap
 955                  * the vmalloc area.
 956                  */
 957                 if (__va(bank->start) >= vmalloc_min ||
 958                     __va(bank->start) < (void *)PAGE_OFFSET) {
 959                         printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
 960                                "(vmalloc region overlap).\n",
 961                                (unsigned long long)bank->start,
 962                                (unsigned long long)bank->start + bank->size - 1);
 963                         continue;
 964                 }
 965
 966                 /*
 967                  * Check whether this memory bank would partially overlap
 968                  * the vmalloc area.
 969                  */
 970                 if (__va(bank->start + bank->size) > vmalloc_min ||
 971                     __va(bank->start + bank->size) < __va(bank->start)) {
 972                         unsigned long newsize = vmalloc_min - __va(bank->start);
 973                         printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
 974                                "to -%.8llx (vmalloc region overlap).\n",
 975                                (unsigned long long)bank->start,
 976                                (unsigned long long)bank->start + bank->size - 1,
 977                                (unsigned long long)bank->start + newsize - 1);
 978                         bank->size = newsize;
 979                 }
 980 #endif
 981                 if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit)
 982                         arm_lowmem_limit = bank->start + bank->size;
 983
 984                 j++;
 985         }
 986 #ifdef CONFIG_HIGHMEM
 987         if (highmem) {
 988                 const char *reason = NULL;
 989
 990                 if (cache_is_vipt_aliasing()) {
 991                         /*
 992                          * Interactions between kmap and other mappings
 993                          * make highmem support with aliasing VIPT caches
 994                          * rather difficult.
 995                          */
 996                         reason = "with VIPT aliasing cache";
 997                 }
 998                 if (reason) {
 999                         printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
1000                                 reason);
1001                         while (j > 0 && meminfo.bank[j - 1].highmem)
1002                                 j--;
1003                 }
1004         }
1005 #endif
1006         meminfo.nr_banks = j;
1007         high_memory = __va(arm_lowmem_limit - 1) + 1;
1008         memblock_set_current_limit(arm_lowmem_limit);
1009 }
1010
1011 static inline void prepare_page_table(void)
1012 {
1013         unsigned long addr;
1014         phys_addr_t end;
1015
1016         /*
1017          * Clear out all the mappings below the kernel image.
1018          */
1019         for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE)
1020                 pmd_clear(pmd_off_k(addr));
1021
1022 #ifdef CONFIG_XIP_KERNEL
1023         /* The XIP kernel is mapped in the module area -- skip over it */
1024         addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
1025 #endif
1026         for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
1027                 pmd_clear(pmd_off_k(addr));
1028
1029         /*
1030          * Find the end of the first block of lowmem.
1031          */
1032         end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
1033         if (end >= arm_lowmem_limit)
1034                 end = arm_lowmem_limit;
1035
1036         /*
1037          * Clear out all the kernel space mappings, except for the first
1038          * memory bank, up to the vmalloc region.
1039          */
1040         for (addr = __phys_to_virt(end);
1041              addr < VMALLOC_START; addr += PMD_SIZE)
1042                 pmd_clear(pmd_off_k(addr));
1043 }
1044
1045 #ifdef CONFIG_ARM_LPAE
1046 /* the first page is reserved for pgd */
1047 #define SWAPPER_PG_DIR_SIZE     (PAGE_SIZE + \
1048                                  PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t))
1049 #else
1050 #define SWAPPER_PG_DIR_SIZE     (PTRS_PER_PGD * sizeof(pgd_t))
1051 #endif
1052
1053 /*
1054  * Reserve the special regions of memory
1055  */
1056 void __init arm_mm_memblock_reserve(void)
1057 {
1058         /*
1059          * Reserve the page tables.  These are already in use,
1060          * and can only be in node 0.
1061          */
1062         memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE);
1063
1064 #ifdef CONFIG_SA1111
1065         /*
1066          * Because of the SA1111 DMA bug, we want to preserve our
1067          * precious DMA-able memory...
1068          */
1069         memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
1070 #endif
1071 }
1072
1073 /*
1074  * Set up the device mappings.  Since we clear out the page tables for all
1075  * mappings above VMALLOC_START, we will remove any debug device mappings.
1076  * This means you have to be careful how you debug this function, or any
1077  * called function.  This means you can't use any function or debugging
1078  * method which may touch any device, otherwise the kernel _will_ crash.
1079  */
1080 static void __init devicemaps_init(struct machine_desc *mdesc)
1081 {
1082         struct map_desc map;
1083         unsigned long addr;
1084         void *vectors;
1085
1086         /*
1087          * Allocate the vector page early.
1088          */
1089         vectors = early_alloc(PAGE_SIZE);
1090
1091         early_trap_init(vectors);
1092
1093         for (addr = VMALLOC_START; addr; addr += PMD_SIZE)
1094                 pmd_clear(pmd_off_k(addr));
1095
1096         /*
1097          * Map the kernel if it is XIP.
1098          * It is always first in the modulearea.
1099          */
1100 #ifdef CONFIG_XIP_KERNEL
1101         map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
1102         map.virtual = MODULES_VADDR;
1103         map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
1104         map.type = MT_ROM;
1105         create_mapping(&map);
1106 #endif
1107
1108         /*
1109          * Map the cache flushing regions.
1110          */
1111 #ifdef FLUSH_BASE
1112         map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
1113         map.virtual = FLUSH_BASE;
1114         map.length = SZ_1M;
1115         map.type = MT_CACHECLEAN;
1116         create_mapping(&map);
1117 #endif
1118 #ifdef FLUSH_BASE_MINICACHE
1119         map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
1120         map.virtual = FLUSH_BASE_MINICACHE;
1121         map.length = SZ_1M;
1122         map.type = MT_MINICLEAN;
1123         create_mapping(&map);
1124 #endif
1125
1126         /*
1127          * Create a mapping for the machine vectors at the high-vectors
1128          * location (0xffff0000).  If we aren't using high-vectors, also
1129          * create a mapping at the low-vectors virtual address.
1130          */
1131         map.pfn = __phys_to_pfn(virt_to_phys(vectors));
1132         map.virtual = 0xffff0000;
1133         map.length = PAGE_SIZE;
1134         map.type = MT_HIGH_VECTORS;
1135         create_mapping(&map);
1136
1137         if (!vectors_high()) {
1138                 map.virtual = 0;
1139                 map.type = MT_LOW_VECTORS;
1140                 create_mapping(&map);
1141         }
1142
1143         /*
1144          * Ask the machine support to map in the statically mapped devices.
1145          */
1146         if (mdesc->map_io)
1147                 mdesc->map_io();
1148         fill_pmd_gaps();
1149
1150         /*
1151          * Finally flush the caches and tlb to ensure that we're in a
1152          * consistent state wrt the writebuffer.  This also ensures that
1153          * any write-allocated cache lines in the vector page are written
1154          * back.  After this point, we can start to touch devices again.
1155          */
1156         local_flush_tlb_all();
1157         flush_cache_all();
1158 }
1159
1160 static void __init kmap_init(void)
1161 {
1162 #ifdef CONFIG_HIGHMEM
1163         pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE),
1164                 PKMAP_BASE, _PAGE_KERNEL_TABLE);
1165 #endif
1166 }
1167
1168 static void __init map_lowmem(void)
1169 {
1170         struct memblock_region *reg;
1171
1172         /* Map all the lowmem memory banks. */
1173         for_each_memblock(memory, reg) {
1174                 phys_addr_t start = reg->base;
1175                 phys_addr_t end = start + reg->size;
1176                 struct map_desc map;
1177
1178                 if (end > arm_lowmem_limit)
1179                         end = arm_lowmem_limit;
1180                 if (start >= end)
1181                         break;
1182
1183                 map.pfn = __phys_to_pfn(start);
1184                 map.virtual = __phys_to_virt(start);
1185                 map.length = end - start;
1186                 map.type = MT_MEMORY;
1187
1188                 create_mapping(&map);
1189         }
1190 }
1191
1192 /*
1193  * paging_init() sets up the page tables, initialises the zone memory
1194  * maps, and sets up the zero page, bad page and bad page tables.
1195  */
1196 void __init paging_init(struct machine_desc *mdesc)
1197 {
1198         void *zero_page;
1199
1200         memblock_set_current_limit(arm_lowmem_limit);
1201
1202         build_mem_type_table();
1203         prepare_page_table();
1204         map_lowmem();
1205         dma_contiguous_remap();
1206         devicemaps_init(mdesc);
1207         kmap_init();
1208
1209         top_pmd = pmd_off_k(0xffff0000);
1210
1211         /* allocate the zero page. */
1212         zero_page = early_alloc(PAGE_SIZE);
1213
1214         bootmem_init();
1215
1216         empty_zero_page = virt_to_page(zero_page);
1217         __flush_dcache_page(NULL, empty_zero_page);
1218 }