Pileus Git - ~andy/linux/blob - arch/arm/mach-versatile/core.c

   1 /*
   2  *  linux/arch/arm/mach-versatile/core.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/init.h>
  22 #include <linux/device.h>
  23 #include <linux/dma-mapping.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/irqdomain.h>
  27 #include <linux/of_address.h>
  28 #include <linux/of_platform.h>
  29 #include <linux/amba/bus.h>
  30 #include <linux/amba/clcd.h>
  31 #include <linux/amba/pl061.h>
  32 #include <linux/amba/mmci.h>
  33 #include <linux/amba/pl022.h>
  34 #include <linux/io.h>
  35 #include <linux/gfp.h>
  36 #include <linux/clkdev.h>
  37 #include <linux/mtd/physmap.h>
  38
  39 #include <asm/system.h>
  40 #include <asm/irq.h>
  41 #include <asm/leds.h>
  42 #include <asm/hardware/arm_timer.h>
  43 #include <asm/hardware/icst.h>
  44 #include <asm/hardware/vic.h>
  45 #include <asm/mach-types.h>
  46
  47 #include <asm/mach/arch.h>
  48 #include <asm/mach/irq.h>
  49 #include <asm/mach/time.h>
  50 #include <asm/mach/map.h>
  51 #include <mach/hardware.h>
  52 #include <mach/platform.h>
  53 #include <asm/hardware/timer-sp.h>
  54
  55 #include <plat/clcd.h>
  56 #include <plat/fpga-irq.h>
  57 #include <plat/sched_clock.h>
  58
  59 #include "core.h"
  60
  61 /*
  62  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  63  * is the (PA >> 12).
  64  *
  65  * Setup a VA for the Versatile Vectored Interrupt Controller.
  66  */
  67 #define VA_VIC_BASE             __io_address(VERSATILE_VIC_BASE)
  68 #define VA_SIC_BASE             __io_address(VERSATILE_SIC_BASE)
  69
  70 static struct fpga_irq_data sic_irq = {
  71         .base           = VA_SIC_BASE,
  72         .irq_start      = IRQ_SIC_START,
  73         .chip.name      = "SIC",
  74 };
  75
  76 #if 1
  77 #define IRQ_MMCI0A      IRQ_VICSOURCE22
  78 #define IRQ_AACI        IRQ_VICSOURCE24
  79 #define IRQ_ETH         IRQ_VICSOURCE25
  80 #define PIC_MASK        0xFFD00000
  81 #else
  82 #define IRQ_MMCI0A      IRQ_SIC_MMCI0A
  83 #define IRQ_AACI        IRQ_SIC_AACI
  84 #define IRQ_ETH         IRQ_SIC_ETH
  85 #define PIC_MASK        0
  86 #endif
  87
  88 /* Lookup table for finding a DT node that represents the vic instance */
  89 static const struct of_device_id vic_of_match[] __initconst = {
  90         { .compatible = "arm,versatile-vic", },
  91         {}
  92 };
  93
  94 static const struct of_device_id sic_of_match[] __initconst = {
  95         { .compatible = "arm,versatile-sic", },
  96         {}
  97 };
  98
  99 void __init versatile_init_irq(void)
 100 {
 101         vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
 102         irq_domain_generate_simple(vic_of_match, VERSATILE_VIC_BASE, IRQ_VIC_START);
 103
 104         writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
 105
 106         fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq);
 107         irq_domain_generate_simple(sic_of_match, VERSATILE_SIC_BASE, IRQ_SIC_START);
 108
 109         /*
 110          * Interrupts on secondary controller from 0 to 8 are routed to
 111          * source 31 on PIC.
 112          * Interrupts from 21 to 31 are routed directly to the VIC on
 113          * the corresponding number on primary controller. This is controlled
 114          * by setting PIC_ENABLEx.
 115          */
 116         writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
 117 }
 118
 119 static struct map_desc versatile_io_desc[] __initdata = {
 120         {
 121                 .virtual        =  IO_ADDRESS(VERSATILE_SYS_BASE),
 122                 .pfn            = __phys_to_pfn(VERSATILE_SYS_BASE),
 123                 .length         = SZ_4K,
 124                 .type           = MT_DEVICE
 125         }, {
 126                 .virtual        =  IO_ADDRESS(VERSATILE_SIC_BASE),
 127                 .pfn            = __phys_to_pfn(VERSATILE_SIC_BASE),
 128                 .length         = SZ_4K,
 129                 .type           = MT_DEVICE
 130         }, {
 131                 .virtual        =  IO_ADDRESS(VERSATILE_VIC_BASE),
 132                 .pfn            = __phys_to_pfn(VERSATILE_VIC_BASE),
 133                 .length         = SZ_4K,
 134                 .type           = MT_DEVICE
 135         }, {
 136                 .virtual        =  IO_ADDRESS(VERSATILE_SCTL_BASE),
 137                 .pfn            = __phys_to_pfn(VERSATILE_SCTL_BASE),
 138                 .length         = SZ_4K * 9,
 139                 .type           = MT_DEVICE
 140         },
 141 #ifdef CONFIG_MACH_VERSATILE_AB
 142         {
 143                 .virtual        =  IO_ADDRESS(VERSATILE_IB2_BASE),
 144                 .pfn            = __phys_to_pfn(VERSATILE_IB2_BASE),
 145                 .length         = SZ_64M,
 146                 .type           = MT_DEVICE
 147         },
 148 #endif
 149 #ifdef CONFIG_DEBUG_LL
 150         {
 151                 .virtual        =  IO_ADDRESS(VERSATILE_UART0_BASE),
 152                 .pfn            = __phys_to_pfn(VERSATILE_UART0_BASE),
 153                 .length         = SZ_4K,
 154                 .type           = MT_DEVICE
 155         },
 156 #endif
 157 #ifdef CONFIG_PCI
 158         {
 159                 .virtual        =  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
 160                 .pfn            = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
 161                 .length         = SZ_4K,
 162                 .type           = MT_DEVICE
 163         }, {
 164                 .virtual        =  (unsigned long)VERSATILE_PCI_VIRT_BASE,
 165                 .pfn            = __phys_to_pfn(VERSATILE_PCI_BASE),
 166                 .length         = VERSATILE_PCI_BASE_SIZE,
 167                 .type           = MT_DEVICE
 168         }, {
 169                 .virtual        =  (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
 170                 .pfn            = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
 171                 .length         = VERSATILE_PCI_CFG_BASE_SIZE,
 172                 .type           = MT_DEVICE
 173         },
 174 #if 0
 175         {
 176                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE0,
 177                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
 178                 .length         = SZ_16M,
 179                 .type           = MT_DEVICE
 180         }, {
 181                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE1,
 182                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
 183                 .length         = SZ_16M,
 184                 .type           = MT_DEVICE
 185         }, {
 186                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE2,
 187                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
 188                 .length         = SZ_16M,
 189                 .type           = MT_DEVICE
 190         },
 191 #endif
 192 #endif
 193 };
 194
 195 void __init versatile_map_io(void)
 196 {
 197         iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 198 }
 199
 200
 201 #define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
 202
 203 static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
 204 {
 205         u32 val;
 206
 207         val = __raw_readl(VERSATILE_FLASHCTRL);
 208         if (on)
 209                 val |= VERSATILE_FLASHPROG_FLVPPEN;
 210         else
 211                 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 212         __raw_writel(val, VERSATILE_FLASHCTRL);
 213 }
 214
 215 static struct physmap_flash_data versatile_flash_data = {
 216         .width                  = 4,
 217         .set_vpp                = versatile_flash_set_vpp,
 218 };
 219
 220 static struct resource versatile_flash_resource = {
 221         .start                  = VERSATILE_FLASH_BASE,
 222         .end                    = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
 223         .flags                  = IORESOURCE_MEM,
 224 };
 225
 226 static struct platform_device versatile_flash_device = {
 227         .name                   = "physmap-flash",
 228         .id                     = 0,
 229         .dev                    = {
 230                 .platform_data  = &versatile_flash_data,
 231         },
 232         .num_resources          = 1,
 233         .resource               = &versatile_flash_resource,
 234 };
 235
 236 static struct resource smc91x_resources[] = {
 237         [0] = {
 238                 .start          = VERSATILE_ETH_BASE,
 239                 .end            = VERSATILE_ETH_BASE + SZ_64K - 1,
 240                 .flags          = IORESOURCE_MEM,
 241         },
 242         [1] = {
 243                 .start          = IRQ_ETH,
 244                 .end            = IRQ_ETH,
 245                 .flags          = IORESOURCE_IRQ,
 246         },
 247 };
 248
 249 static struct platform_device smc91x_device = {
 250         .name           = "smc91x",
 251         .id             = 0,
 252         .num_resources  = ARRAY_SIZE(smc91x_resources),
 253         .resource       = smc91x_resources,
 254 };
 255
 256 static struct resource versatile_i2c_resource = {
 257         .start                  = VERSATILE_I2C_BASE,
 258         .end                    = VERSATILE_I2C_BASE + SZ_4K - 1,
 259         .flags                  = IORESOURCE_MEM,
 260 };
 261
 262 static struct platform_device versatile_i2c_device = {
 263         .name                   = "versatile-i2c",
 264         .id                     = 0,
 265         .num_resources          = 1,
 266         .resource               = &versatile_i2c_resource,
 267 };
 268
 269 static struct i2c_board_info versatile_i2c_board_info[] = {
 270         {
 271                 I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 272         },
 273 };
 274
 275 static int __init versatile_i2c_init(void)
 276 {
 277         return i2c_register_board_info(0, versatile_i2c_board_info,
 278                                        ARRAY_SIZE(versatile_i2c_board_info));
 279 }
 280 arch_initcall(versatile_i2c_init);
 281
 282 #define VERSATILE_SYSMCI        (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
 283
 284 unsigned int mmc_status(struct device *dev)
 285 {
 286         struct amba_device *adev = container_of(dev, struct amba_device, dev);
 287         u32 mask;
 288
 289         if (adev->res.start == VERSATILE_MMCI0_BASE)
 290                 mask = 1;
 291         else
 292                 mask = 2;
 293
 294         return readl(VERSATILE_SYSMCI) & mask;
 295 }
 296
 297 static struct mmci_platform_data mmc0_plat_data = {
 298         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 299         .status         = mmc_status,
 300         .gpio_wp        = -1,
 301         .gpio_cd        = -1,
 302 };
 303
 304 static struct resource char_lcd_resources[] = {
 305         {
 306                 .start = VERSATILE_CHAR_LCD_BASE,
 307                 .end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
 308                 .flags = IORESOURCE_MEM,
 309         },
 310 };
 311
 312 static struct platform_device char_lcd_device = {
 313         .name           =       "arm-charlcd",
 314         .id             =       -1,
 315         .num_resources  =       ARRAY_SIZE(char_lcd_resources),
 316         .resource       =       char_lcd_resources,
 317 };
 318
 319 /*
 320  * Clock handling
 321  */
 322 static const struct icst_params versatile_oscvco_params = {
 323         .ref            = 24000000,
 324         .vco_max        = ICST307_VCO_MAX,
 325         .vco_min        = ICST307_VCO_MIN,
 326         .vd_min         = 4 + 8,
 327         .vd_max         = 511 + 8,
 328         .rd_min         = 1 + 2,
 329         .rd_max         = 127 + 2,
 330         .s2div          = icst307_s2div,
 331         .idx2s          = icst307_idx2s,
 332 };
 333
 334 static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
 335 {
 336         void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
 337         u32 val;
 338
 339         val = readl(clk->vcoreg) & ~0x7ffff;
 340         val |= vco.v | (vco.r << 9) | (vco.s << 16);
 341
 342         writel(0xa05f, sys_lock);
 343         writel(val, clk->vcoreg);
 344         writel(0, sys_lock);
 345 }
 346
 347 static const struct clk_ops osc4_clk_ops = {
 348         .round  = icst_clk_round,
 349         .set    = icst_clk_set,
 350         .setvco = versatile_oscvco_set,
 351 };
 352
 353 static struct clk osc4_clk = {
 354         .ops    = &osc4_clk_ops,
 355         .params = &versatile_oscvco_params,
 356 };
 357
 358 /*
 359  * These are fixed clocks.
 360  */
 361 static struct clk ref24_clk = {
 362         .rate   = 24000000,
 363 };
 364
 365 static struct clk sp804_clk = {
 366         .rate   = 1000000,
 367 };
 368
 369 static struct clk dummy_apb_pclk;
 370
 371 static struct clk_lookup lookups[] = {
 372         {       /* AMBA bus clock */
 373                 .con_id         = "apb_pclk",
 374                 .clk            = &dummy_apb_pclk,
 375         }, {    /* UART0 */
 376                 .dev_id         = "dev:f1",
 377                 .clk            = &ref24_clk,
 378         }, {    /* UART1 */
 379                 .dev_id         = "dev:f2",
 380                 .clk            = &ref24_clk,
 381         }, {    /* UART2 */
 382                 .dev_id         = "dev:f3",
 383                 .clk            = &ref24_clk,
 384         }, {    /* UART3 */
 385                 .dev_id         = "fpga:09",
 386                 .clk            = &ref24_clk,
 387         }, {    /* KMI0 */
 388                 .dev_id         = "fpga:06",
 389                 .clk            = &ref24_clk,
 390         }, {    /* KMI1 */
 391                 .dev_id         = "fpga:07",
 392                 .clk            = &ref24_clk,
 393         }, {    /* MMC0 */
 394                 .dev_id         = "fpga:05",
 395                 .clk            = &ref24_clk,
 396         }, {    /* MMC1 */
 397                 .dev_id         = "fpga:0b",
 398                 .clk            = &ref24_clk,
 399         }, {    /* SSP */
 400                 .dev_id         = "dev:f4",
 401                 .clk            = &ref24_clk,
 402         }, {    /* CLCD */
 403                 .dev_id         = "dev:20",
 404                 .clk            = &osc4_clk,
 405         }, {    /* SP804 timers */
 406                 .dev_id         = "sp804",
 407                 .clk            = &sp804_clk,
 408         },
 409 };
 410
 411 /*
 412  * CLCD support.
 413  */
 414 #define SYS_CLCD_MODE_MASK      (3 << 0)
 415 #define SYS_CLCD_MODE_888       (0 << 0)
 416 #define SYS_CLCD_MODE_5551      (1 << 0)
 417 #define SYS_CLCD_MODE_565_RLSB  (2 << 0)
 418 #define SYS_CLCD_MODE_565_BLSB  (3 << 0)
 419 #define SYS_CLCD_NLCDIOON       (1 << 2)
 420 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
 421 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
 422 #define SYS_CLCD_ID_MASK        (0x1f << 8)
 423 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
 424 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
 425 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
 426 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
 427 #define SYS_CLCD_ID_VGA         (0x1f << 8)
 428
 429 static bool is_sanyo_2_5_lcd;
 430
 431 /*
 432  * Disable all display connectors on the interface module.
 433  */
 434 static void versatile_clcd_disable(struct clcd_fb *fb)
 435 {
 436         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 437         u32 val;
 438
 439         val = readl(sys_clcd);
 440         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 441         writel(val, sys_clcd);
 442
 443 #ifdef CONFIG_MACH_VERSATILE_AB
 444         /*
 445          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
 446          */
 447         if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
 448                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 449                 unsigned long ctrl;
 450
 451                 ctrl = readl(versatile_ib2_ctrl);
 452                 ctrl &= ~0x01;
 453                 writel(ctrl, versatile_ib2_ctrl);
 454         }
 455 #endif
 456 }
 457
 458 /*
 459  * Enable the relevant connector on the interface module.
 460  */
 461 static void versatile_clcd_enable(struct clcd_fb *fb)
 462 {
 463         struct fb_var_screeninfo *var = &fb->fb.var;
 464         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 465         u32 val;
 466
 467         val = readl(sys_clcd);
 468         val &= ~SYS_CLCD_MODE_MASK;
 469
 470         switch (var->green.length) {
 471         case 5:
 472                 val |= SYS_CLCD_MODE_5551;
 473                 break;
 474         case 6:
 475                 if (var->red.offset == 0)
 476                         val |= SYS_CLCD_MODE_565_RLSB;
 477                 else
 478                         val |= SYS_CLCD_MODE_565_BLSB;
 479                 break;
 480         case 8:
 481                 val |= SYS_CLCD_MODE_888;
 482                 break;
 483         }
 484
 485         /*
 486          * Set the MUX
 487          */
 488         writel(val, sys_clcd);
 489
 490         /*
 491          * And now enable the PSUs
 492          */
 493         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 494         writel(val, sys_clcd);
 495
 496 #ifdef CONFIG_MACH_VERSATILE_AB
 497         /*
 498          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
 499          */
 500         if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
 501                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 502                 unsigned long ctrl;
 503
 504                 ctrl = readl(versatile_ib2_ctrl);
 505                 ctrl |= 0x01;
 506                 writel(ctrl, versatile_ib2_ctrl);
 507         }
 508 #endif
 509 }
 510
 511 /*
 512  * Detect which LCD panel is connected, and return the appropriate
 513  * clcd_panel structure.  Note: we do not have any information on
 514  * the required timings for the 8.4in panel, so we presently assume
 515  * VGA timings.
 516  */
 517 static int versatile_clcd_setup(struct clcd_fb *fb)
 518 {
 519         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 520         const char *panel_name;
 521         u32 val;
 522
 523         is_sanyo_2_5_lcd = false;
 524
 525         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 526         if (val == SYS_CLCD_ID_SANYO_3_8)
 527                 panel_name = "Sanyo TM38QV67A02A";
 528         else if (val == SYS_CLCD_ID_SANYO_2_5) {
 529                 panel_name = "Sanyo QVGA Portrait";
 530                 is_sanyo_2_5_lcd = true;
 531         } else if (val == SYS_CLCD_ID_EPSON_2_2)
 532                 panel_name = "Epson L2F50113T00";
 533         else if (val == SYS_CLCD_ID_VGA)
 534                 panel_name = "VGA";
 535         else {
 536                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 537                         val);
 538                 panel_name = "VGA";
 539         }
 540
 541         fb->panel = versatile_clcd_get_panel(panel_name);
 542         if (!fb->panel)
 543                 return -EINVAL;
 544
 545         return versatile_clcd_setup_dma(fb, SZ_1M);
 546 }
 547
 548 static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
 549 {
 550         clcdfb_decode(fb, regs);
 551
 552         /* Always clear BGR for RGB565: we do the routing externally */
 553         if (fb->fb.var.green.length == 6)
 554                 regs->cntl &= ~CNTL_BGR;
 555 }
 556
 557 static struct clcd_board clcd_plat_data = {
 558         .name           = "Versatile",
 559         .caps           = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
 560         .check          = clcdfb_check,
 561         .decode         = versatile_clcd_decode,
 562         .disable        = versatile_clcd_disable,
 563         .enable         = versatile_clcd_enable,
 564         .setup          = versatile_clcd_setup,
 565         .mmap           = versatile_clcd_mmap_dma,
 566         .remove         = versatile_clcd_remove_dma,
 567 };
 568
 569 static struct pl061_platform_data gpio0_plat_data = {
 570         .gpio_base      = 0,
 571         .irq_base       = IRQ_GPIO0_START,
 572 };
 573
 574 static struct pl061_platform_data gpio1_plat_data = {
 575         .gpio_base      = 8,
 576         .irq_base       = IRQ_GPIO1_START,
 577 };
 578
 579 static struct pl022_ssp_controller ssp0_plat_data = {
 580         .bus_id = 0,
 581         .enable_dma = 0,
 582         .num_chipselect = 1,
 583 };
 584
 585 #define AACI_IRQ        { IRQ_AACI, NO_IRQ }
 586 #define MMCI0_IRQ       { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
 587 #define KMI0_IRQ        { IRQ_SIC_KMI0, NO_IRQ }
 588 #define KMI1_IRQ        { IRQ_SIC_KMI1, NO_IRQ }
 589
 590 /*
 591  * These devices are connected directly to the multi-layer AHB switch
 592  */
 593 #define SMC_IRQ         { NO_IRQ, NO_IRQ }
 594 #define MPMC_IRQ        { NO_IRQ, NO_IRQ }
 595 #define CLCD_IRQ        { IRQ_CLCDINT, NO_IRQ }
 596 #define DMAC_IRQ        { IRQ_DMAINT, NO_IRQ }
 597
 598 /*
 599  * These devices are connected via the core APB bridge
 600  */
 601 #define SCTL_IRQ        { NO_IRQ, NO_IRQ }
 602 #define WATCHDOG_IRQ    { IRQ_WDOGINT, NO_IRQ }
 603 #define GPIO0_IRQ       { IRQ_GPIOINT0, NO_IRQ }
 604 #define GPIO1_IRQ       { IRQ_GPIOINT1, NO_IRQ }
 605 #define RTC_IRQ         { IRQ_RTCINT, NO_IRQ }
 606
 607 /*
 608  * These devices are connected via the DMA APB bridge
 609  */
 610 #define SCI_IRQ         { IRQ_SCIINT, NO_IRQ }
 611 #define UART0_IRQ       { IRQ_UARTINT0, NO_IRQ }
 612 #define UART1_IRQ       { IRQ_UARTINT1, NO_IRQ }
 613 #define UART2_IRQ       { IRQ_UARTINT2, NO_IRQ }
 614 #define SSP_IRQ         { IRQ_SSPINT, NO_IRQ }
 615
 616 /* FPGA Primecells */
 617 AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
 618 AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
 619 AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
 620 AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 621
 622 /* DevChip Primecells */
 623 AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
 624 AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
 625 AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 626 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 627 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 628 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
 629 AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
 630 AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
 631 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 632 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 633 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
 634 AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
 635 AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
 636 AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
 637
 638 static struct amba_device *amba_devs[] __initdata = {
 639         &dmac_device,
 640         &uart0_device,
 641         &uart1_device,
 642         &uart2_device,
 643         &smc_device,
 644         &mpmc_device,
 645         &clcd_device,
 646         &sctl_device,
 647         &wdog_device,
 648         &gpio0_device,
 649         &gpio1_device,
 650         &rtc_device,
 651         &sci0_device,
 652         &ssp0_device,
 653         &aaci_device,
 654         &mmc0_device,
 655         &kmi0_device,
 656         &kmi1_device,
 657 };
 658
 659 #ifdef CONFIG_OF
 660 /*
 661  * Lookup table for attaching a specific name and platform_data pointer to
 662  * devices as they get created by of_platform_populate().  Ideally this table
 663  * would not exist, but the current clock implementation depends on some devices
 664  * having a specific name.
 665  */
 666 struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
 667         OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", NULL),
 668         OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL),
 669         OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL),
 670         OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL),
 671         OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL),
 672
 673         OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
 674         OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL),
 675         OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL),
 676         OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL),
 677         OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", NULL),
 678
 679 #if 0
 680         /*
 681          * These entries are unnecessary because no clocks referencing
 682          * them.  I've left them in for now as place holders in case
 683          * any of them need to be added back, but they should be
 684          * removed before actually committing this patch.  --gcl
 685          */
 686         OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL),
 687         OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL),
 688         OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL),
 689         OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL),
 690         OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL),
 691
 692         OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL),
 693         OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL),
 694         OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL),
 695         OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL),
 696         OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL),
 697         OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL),
 698         OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL),
 699         OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL),
 700 #endif
 701         {}
 702 };
 703 #endif
 704
 705 #ifdef CONFIG_LEDS
 706 #define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
 707
 708 static void versatile_leds_event(led_event_t ledevt)
 709 {
 710         unsigned long flags;
 711         u32 val;
 712
 713         local_irq_save(flags);
 714         val = readl(VA_LEDS_BASE);
 715
 716         switch (ledevt) {
 717         case led_idle_start:
 718                 val = val & ~VERSATILE_SYS_LED0;
 719                 break;
 720
 721         case led_idle_end:
 722                 val = val | VERSATILE_SYS_LED0;
 723                 break;
 724
 725         case led_timer:
 726                 val = val ^ VERSATILE_SYS_LED1;
 727                 break;
 728
 729         case led_halted:
 730                 val = 0;
 731                 break;
 732
 733         default:
 734                 break;
 735         }
 736
 737         writel(val, VA_LEDS_BASE);
 738         local_irq_restore(flags);
 739 }
 740 #endif  /* CONFIG_LEDS */
 741
 742 void versatile_restart(char mode, const char *cmd)
 743 {
 744         void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
 745         u32 val;
 746
 747         val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET);
 748         val |= 0x105;
 749
 750         __raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET);
 751         __raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET);
 752         __raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET);
 753 }
 754
 755 /* Early initializations */
 756 void __init versatile_init_early(void)
 757 {
 758         void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
 759
 760         osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET;
 761         clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 762
 763         versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
 764 }
 765
 766 void __init versatile_init(void)
 767 {
 768         int i;
 769
 770         platform_device_register(&versatile_flash_device);
 771         platform_device_register(&versatile_i2c_device);
 772         platform_device_register(&smc91x_device);
 773         platform_device_register(&char_lcd_device);
 774
 775         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 776                 struct amba_device *d = amba_devs[i];
 777                 amba_device_register(d, &iomem_resource);
 778         }
 779
 780 #ifdef CONFIG_LEDS
 781         leds_event = versatile_leds_event;
 782 #endif
 783 }
 784
 785 /*
 786  * Where is the timer (VA)?
 787  */
 788 #define TIMER0_VA_BASE           __io_address(VERSATILE_TIMER0_1_BASE)
 789 #define TIMER1_VA_BASE          (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
 790 #define TIMER2_VA_BASE           __io_address(VERSATILE_TIMER2_3_BASE)
 791 #define TIMER3_VA_BASE          (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
 792
 793 /*
 794  * Set up timer interrupt, and return the current time in seconds.
 795  */
 796 static void __init versatile_timer_init(void)
 797 {
 798         u32 val;
 799
 800         /*
 801          * set clock frequency:
 802          *      VERSATILE_REFCLK is 32KHz
 803          *      VERSATILE_TIMCLK is 1MHz
 804          */
 805         val = readl(__io_address(VERSATILE_SCTL_BASE));
 806         writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
 807                (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
 808                (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
 809                (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
 810                __io_address(VERSATILE_SCTL_BASE));
 811
 812         /*
 813          * Initialise to a known state (all timers off)
 814          */
 815         writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 816         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 817         writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 818         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 819
 820         sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
 821         sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
 822 }
 823
 824 struct sys_timer versatile_timer = {
 825         .init           = versatile_timer_init,
 826 };
 827