Pileus Git - ~andy/linux/blob - arch/arm/mach-pxa/sharpsl_pm.c

   1 /*
   2  * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
   3  * series of PDAs
   4  *
   5  * Copyright (c) 2004-2005 Richard Purdie
   6  *
   7  * Based on code written by Sharp for 2.4 kernels
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  */
  14
  15 #undef DEBUG
  16
  17 #include <linux/module.h>
  18 #include <linux/kernel.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/apm-emulation.h>
  22 #include <linux/timer.h>
  23 #include <linux/delay.h>
  24 #include <linux/leds.h>
  25 #include <linux/suspend.h>
  26 #include <linux/gpio.h>
  27
  28 #include <asm/mach-types.h>
  29 #include <mach/pm.h>
  30 #include <mach/pxa2xx-regs.h>
  31 #include <mach/regs-rtc.h>
  32 #include <mach/sharpsl_pm.h>
  33
  34 /*
  35  * Constants
  36  */
  37 #define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
  38 #define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
  39 #define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
  40 #define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
  41
  42 #define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
  43 #define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
  44 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
  45 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
  46 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
  47 #define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
  48 #define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
  49 #define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
  50
  51 /*
  52  * Prototypes
  53  */
  54 #ifdef CONFIG_PM
  55 static int sharpsl_off_charge_battery(void);
  56 static int sharpsl_check_battery_voltage(void);
  57 static int sharpsl_fatal_check(void);
  58 #endif
  59 static int sharpsl_check_battery_temp(void);
  60 static int sharpsl_ac_check(void);
  61 static int sharpsl_average_value(int ad);
  62 static void sharpsl_average_clear(void);
  63 static void sharpsl_charge_toggle(struct work_struct *private_);
  64 static void sharpsl_battery_thread(struct work_struct *private_);
  65
  66
  67 /*
  68  * Variables
  69  */
  70 struct sharpsl_pm_status sharpsl_pm;
  71 static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
  72 static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
  73 DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
  74
  75
  76
  77 struct battery_thresh sharpsl_battery_levels_acin[] = {
  78         { 213, 100},
  79         { 212,  98},
  80         { 211,  95},
  81         { 210,  93},
  82         { 209,  90},
  83         { 208,  88},
  84         { 207,  85},
  85         { 206,  83},
  86         { 205,  80},
  87         { 204,  78},
  88         { 203,  75},
  89         { 202,  73},
  90         { 201,  70},
  91         { 200,  68},
  92         { 199,  65},
  93         { 198,  63},
  94         { 197,  60},
  95         { 196,  58},
  96         { 195,  55},
  97         { 194,  53},
  98         { 193,  50},
  99         { 192,  48},
 100         { 192,  45},
 101         { 191,  43},
 102         { 191,  40},
 103         { 190,  38},
 104         { 190,  35},
 105         { 189,  33},
 106         { 188,  30},
 107         { 187,  28},
 108         { 186,  25},
 109         { 185,  23},
 110         { 184,  20},
 111         { 183,  18},
 112         { 182,  15},
 113         { 181,  13},
 114         { 180,  10},
 115         { 179,   8},
 116         { 178,   5},
 117         {   0,   0},
 118 };
 119
 120 struct battery_thresh sharpsl_battery_levels_noac[] = {
 121         { 213, 100},
 122         { 212,  98},
 123         { 211,  95},
 124         { 210,  93},
 125         { 209,  90},
 126         { 208,  88},
 127         { 207,  85},
 128         { 206,  83},
 129         { 205,  80},
 130         { 204,  78},
 131         { 203,  75},
 132         { 202,  73},
 133         { 201,  70},
 134         { 200,  68},
 135         { 199,  65},
 136         { 198,  63},
 137         { 197,  60},
 138         { 196,  58},
 139         { 195,  55},
 140         { 194,  53},
 141         { 193,  50},
 142         { 192,  48},
 143         { 191,  45},
 144         { 190,  43},
 145         { 189,  40},
 146         { 188,  38},
 147         { 187,  35},
 148         { 186,  33},
 149         { 185,  30},
 150         { 184,  28},
 151         { 183,  25},
 152         { 182,  23},
 153         { 181,  20},
 154         { 180,  18},
 155         { 179,  15},
 156         { 178,  13},
 157         { 177,  10},
 158         { 176,   8},
 159         { 175,   5},
 160         {   0,   0},
 161 };
 162
 163 /* MAX1111 Commands */
 164 #define MAXCTRL_PD0      (1u << 0)
 165 #define MAXCTRL_PD1      (1u << 1)
 166 #define MAXCTRL_SGL      (1u << 2)
 167 #define MAXCTRL_UNI      (1u << 3)
 168 #define MAXCTRL_SEL_SH   4
 169 #define MAXCTRL_STR      (1u << 7)
 170
 171 extern int max1111_read_channel(int);
 172 /*
 173  * Read MAX1111 ADC
 174  */
 175 int sharpsl_pm_pxa_read_max1111(int channel)
 176 {
 177         /* Ugly, better move this function into another module */
 178         if (machine_is_tosa())
 179             return 0;
 180
 181         /* max1111 accepts channels from 0-3, however,
 182          * it is encoded from 0-7 here in the code.
 183          */
 184         return max1111_read_channel(channel >> 1);
 185 }
 186
 187 static int get_percentage(int voltage)
 188 {
 189         int i = sharpsl_pm.machinfo->bat_levels - 1;
 190         int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
 191         struct battery_thresh *thresh;
 192
 193         if (sharpsl_pm.charge_mode == CHRG_ON)
 194                 thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
 195         else
 196                 thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
 197
 198         while (i > 0 && (voltage > thresh[i].voltage))
 199                 i--;
 200
 201         return thresh[i].percentage;
 202 }
 203
 204 static int get_apm_status(int voltage)
 205 {
 206         int low_thresh, high_thresh;
 207
 208         if (sharpsl_pm.charge_mode == CHRG_ON) {
 209                 high_thresh = sharpsl_pm.machinfo->status_high_acin;
 210                 low_thresh = sharpsl_pm.machinfo->status_low_acin;
 211         } else {
 212                 high_thresh = sharpsl_pm.machinfo->status_high_noac;
 213                 low_thresh = sharpsl_pm.machinfo->status_low_noac;
 214         }
 215
 216         if (voltage >= high_thresh)
 217                 return APM_BATTERY_STATUS_HIGH;
 218         if (voltage >= low_thresh)
 219                 return APM_BATTERY_STATUS_LOW;
 220         return APM_BATTERY_STATUS_CRITICAL;
 221 }
 222
 223 void sharpsl_battery_kick(void)
 224 {
 225         schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
 226 }
 227 EXPORT_SYMBOL(sharpsl_battery_kick);
 228
 229
 230 static void sharpsl_battery_thread(struct work_struct *private_)
 231 {
 232         int voltage, percent, apm_status, i;
 233
 234         if (!sharpsl_pm.machinfo)
 235                 return;
 236
 237         sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
 238
 239         /* Corgi cannot confirm when battery fully charged so periodically kick! */
 240         if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
 241                         && time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
 242                 schedule_delayed_work(&toggle_charger, 0);
 243
 244         for (i = 0; i < 5; i++) {
 245                 voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 246                 if (voltage > 0)
 247                         break;
 248         }
 249         if (voltage <= 0) {
 250                 voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
 251                 dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
 252         }
 253
 254         voltage = sharpsl_average_value(voltage);
 255         apm_status = get_apm_status(voltage);
 256         percent = get_percentage(voltage);
 257
 258         /* At low battery voltages, the voltage has a tendency to start
 259            creeping back up so we try to avoid this here */
 260         if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
 261             || (apm_status == APM_BATTERY_STATUS_HIGH)
 262             || percent <= sharpsl_pm.battstat.mainbat_percent) {
 263                 sharpsl_pm.battstat.mainbat_voltage = voltage;
 264                 sharpsl_pm.battstat.mainbat_status = apm_status;
 265                 sharpsl_pm.battstat.mainbat_percent = percent;
 266         }
 267
 268         dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
 269                         sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
 270
 271         /* Suspend if critical battery level */
 272         if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
 273              && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
 274              && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
 275                 sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
 276                 dev_err(sharpsl_pm.dev, "Fatal Off\n");
 277                 apm_queue_event(APM_CRITICAL_SUSPEND);
 278         }
 279
 280         schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
 281 }
 282
 283 void sharpsl_pm_led(int val)
 284 {
 285         if (val == SHARPSL_LED_ERROR) {
 286                 dev_err(sharpsl_pm.dev, "Charging Error!\n");
 287         } else if (val == SHARPSL_LED_ON) {
 288                 dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
 289                 led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
 290         } else {
 291                 dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
 292                 led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
 293         }
 294 }
 295
 296 static void sharpsl_charge_on(void)
 297 {
 298         dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
 299
 300         sharpsl_pm.full_count = 0;
 301         sharpsl_pm.charge_mode = CHRG_ON;
 302         schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
 303         schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
 304 }
 305
 306 static void sharpsl_charge_off(void)
 307 {
 308         dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
 309
 310         sharpsl_pm.machinfo->charge(0);
 311         sharpsl_pm_led(SHARPSL_LED_OFF);
 312         sharpsl_pm.charge_mode = CHRG_OFF;
 313
 314         schedule_delayed_work(&sharpsl_bat, 0);
 315 }
 316
 317 static void sharpsl_charge_error(void)
 318 {
 319         sharpsl_pm_led(SHARPSL_LED_ERROR);
 320         sharpsl_pm.machinfo->charge(0);
 321         sharpsl_pm.charge_mode = CHRG_ERROR;
 322 }
 323
 324 static void sharpsl_charge_toggle(struct work_struct *private_)
 325 {
 326         dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
 327
 328         if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
 329                 sharpsl_charge_off();
 330                 return;
 331         } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
 332                 sharpsl_charge_error();
 333                 return;
 334         }
 335
 336         sharpsl_pm_led(SHARPSL_LED_ON);
 337         sharpsl_pm.machinfo->charge(0);
 338         mdelay(SHARPSL_CHARGE_WAIT_TIME);
 339         sharpsl_pm.machinfo->charge(1);
 340
 341         sharpsl_pm.charge_start_time = jiffies;
 342 }
 343
 344 static void sharpsl_ac_timer(unsigned long data)
 345 {
 346         int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 347
 348         dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
 349
 350         sharpsl_average_clear();
 351         if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
 352                 sharpsl_charge_on();
 353         else if (sharpsl_pm.charge_mode == CHRG_ON)
 354                 sharpsl_charge_off();
 355
 356         schedule_delayed_work(&sharpsl_bat, 0);
 357 }
 358
 359
 360 static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
 361 {
 362         /* Delay the event slightly to debounce */
 363         /* Must be a smaller delay than the chrg_full_isr below */
 364         mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
 365
 366         return IRQ_HANDLED;
 367 }
 368
 369 static void sharpsl_chrg_full_timer(unsigned long data)
 370 {
 371         dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
 372
 373         sharpsl_pm.full_count++;
 374
 375         if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
 376                 dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
 377                 if (sharpsl_pm.charge_mode == CHRG_ON)
 378                         sharpsl_charge_off();
 379         } else if (sharpsl_pm.full_count < 2) {
 380                 dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
 381                 schedule_delayed_work(&toggle_charger, 0);
 382         } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
 383                 dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
 384                 schedule_delayed_work(&toggle_charger, 0);
 385         } else {
 386                 sharpsl_charge_off();
 387                 sharpsl_pm.charge_mode = CHRG_DONE;
 388                 dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
 389         }
 390 }
 391
 392 /* Charging Finished Interrupt (Not present on Corgi) */
 393 /* Can trigger at the same time as an AC status change so
 394    delay until after that has been processed */
 395 static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
 396 {
 397         if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
 398                 return IRQ_HANDLED;
 399
 400         /* delay until after any ac interrupt */
 401         mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
 402
 403         return IRQ_HANDLED;
 404 }
 405
 406 static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
 407 {
 408         int is_fatal = 0;
 409
 410         if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
 411                 dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
 412                 is_fatal = 1;
 413         }
 414
 415         if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
 416                 dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
 417                 is_fatal = 1;
 418         }
 419
 420         if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
 421                 sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
 422                 apm_queue_event(APM_CRITICAL_SUSPEND);
 423         }
 424
 425         return IRQ_HANDLED;
 426 }
 427
 428 /*
 429  * Maintain an average of the last 10 readings
 430  */
 431 #define SHARPSL_CNV_VALUE_NUM    10
 432 static int sharpsl_ad_index;
 433
 434 static void sharpsl_average_clear(void)
 435 {
 436         sharpsl_ad_index = 0;
 437 }
 438
 439 static int sharpsl_average_value(int ad)
 440 {
 441         int i, ad_val = 0;
 442         static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
 443
 444         if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
 445                 sharpsl_ad_index = 0;
 446                 return ad;
 447         }
 448
 449         sharpsl_ad[sharpsl_ad_index] = ad;
 450         sharpsl_ad_index++;
 451         if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
 452                 for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
 453                         sharpsl_ad[i] = sharpsl_ad[i+1];
 454                 sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
 455         }
 456         for (i = 0; i < sharpsl_ad_index; i++)
 457                 ad_val += sharpsl_ad[i];
 458
 459         return ad_val / sharpsl_ad_index;
 460 }
 461
 462 /*
 463  * Take an array of 5 integers, remove the maximum and minimum values
 464  * and return the average.
 465  */
 466 static int get_select_val(int *val)
 467 {
 468         int i, j, k, temp, sum = 0;
 469
 470         /* Find MAX val */
 471         temp = val[0];
 472         j = 0;
 473         for (i = 1; i < 5; i++) {
 474                 if (temp < val[i]) {
 475                         temp = val[i];
 476                         j = i;
 477                 }
 478         }
 479
 480         /* Find MIN val */
 481         temp = val[4];
 482         k = 4;
 483         for (i = 3; i >= 0; i--) {
 484                 if (temp > val[i]) {
 485                         temp = val[i];
 486                         k = i;
 487                 }
 488         }
 489
 490         for (i = 0; i < 5; i++)
 491                 if (i != j && i != k)
 492                         sum += val[i];
 493
 494         dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
 495
 496         return sum/3;
 497 }
 498
 499 static int sharpsl_check_battery_temp(void)
 500 {
 501         int val, i, buff[5];
 502
 503         /* Check battery temperature */
 504         for (i = 0; i < 5; i++) {
 505                 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
 506                 sharpsl_pm.machinfo->measure_temp(1);
 507                 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
 508                 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
 509                 sharpsl_pm.machinfo->measure_temp(0);
 510         }
 511
 512         val = get_select_val(buff);
 513
 514         dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
 515         if (val > sharpsl_pm.machinfo->charge_on_temp) {
 516                 printk(KERN_WARNING "Not charging: temperature out of limits.\n");
 517                 return -1;
 518         }
 519
 520         return 0;
 521 }
 522
 523 #ifdef CONFIG_PM
 524 static int sharpsl_check_battery_voltage(void)
 525 {
 526         int val, i, buff[5];
 527
 528         /* disable charge, enable discharge */
 529         sharpsl_pm.machinfo->charge(0);
 530         sharpsl_pm.machinfo->discharge(1);
 531         mdelay(SHARPSL_WAIT_DISCHARGE_ON);
 532
 533         if (sharpsl_pm.machinfo->discharge1)
 534                 sharpsl_pm.machinfo->discharge1(1);
 535
 536         /* Check battery voltage */
 537         for (i = 0; i < 5; i++) {
 538                 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 539                 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
 540         }
 541
 542         if (sharpsl_pm.machinfo->discharge1)
 543                 sharpsl_pm.machinfo->discharge1(0);
 544
 545         sharpsl_pm.machinfo->discharge(0);
 546
 547         val = get_select_val(buff);
 548         dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
 549
 550         if (val < sharpsl_pm.machinfo->charge_on_volt)
 551                 return -1;
 552
 553         return 0;
 554 }
 555 #endif
 556
 557 static int sharpsl_ac_check(void)
 558 {
 559         int temp, i, buff[5];
 560
 561         for (i = 0; i < 5; i++) {
 562                 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
 563                 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
 564         }
 565
 566         temp = get_select_val(buff);
 567         dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
 568
 569         if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
 570                 dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
 571                 return -1;
 572         }
 573
 574         return 0;
 575 }
 576
 577 #ifdef CONFIG_PM
 578 static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
 579 {
 580         sharpsl_pm.flags |= SHARPSL_SUSPENDED;
 581         flush_delayed_work_sync(&toggle_charger);
 582         flush_delayed_work_sync(&sharpsl_bat);
 583
 584         if (sharpsl_pm.charge_mode == CHRG_ON)
 585                 sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
 586         else
 587                 sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
 588
 589         return 0;
 590 }
 591
 592 static int sharpsl_pm_resume(struct platform_device *pdev)
 593 {
 594         /* Clear the reset source indicators as they break the bootloader upon reboot */
 595         RCSR = 0x0f;
 596         sharpsl_average_clear();
 597         sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
 598         sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
 599
 600         return 0;
 601 }
 602
 603 static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
 604 {
 605         dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
 606
 607         dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
 608         /* not charging and AC-IN! */
 609
 610         if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
 611                 dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
 612                 sharpsl_pm.charge_mode = CHRG_OFF;
 613                 sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
 614                 sharpsl_off_charge_battery();
 615         }
 616
 617         sharpsl_pm.machinfo->presuspend();
 618
 619         PEDR = 0xffffffff; /* clear it */
 620
 621         sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
 622         if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
 623                 RTSR &= RTSR_ALE;
 624                 RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
 625                 dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
 626                 sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
 627         } else if (alarm_enable) {
 628                 RTSR &= RTSR_ALE;
 629                 RTAR = alarm_time;
 630                 dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
 631         } else {
 632                 dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
 633         }
 634
 635         pxa_pm_enter(state);
 636
 637         sharpsl_pm.machinfo->postsuspend();
 638
 639         dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
 640 }
 641
 642 static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
 643 {
 644         if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
 645                 if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
 646                         dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
 647                         corgi_goto_sleep(alarm_time, alarm_enable, state);
 648                         return 1;
 649                 }
 650                 if (sharpsl_off_charge_battery()) {
 651                         dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
 652                         corgi_goto_sleep(alarm_time, alarm_enable, state);
 653                         return 1;
 654                 }
 655                 dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
 656         }
 657
 658         if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
 659             (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL))) {
 660                 dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
 661                 corgi_goto_sleep(alarm_time, alarm_enable, state);
 662                 return 1;
 663         }
 664
 665         return 0;
 666 }
 667
 668 static int corgi_pxa_pm_enter(suspend_state_t state)
 669 {
 670         unsigned long alarm_time = RTAR;
 671         unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
 672
 673         dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
 674
 675         corgi_goto_sleep(alarm_time, alarm_status, state);
 676
 677         while (corgi_enter_suspend(alarm_time, alarm_status, state))
 678                 {}
 679
 680         if (sharpsl_pm.machinfo->earlyresume)
 681                 sharpsl_pm.machinfo->earlyresume();
 682
 683         dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
 684
 685         return 0;
 686 }
 687
 688 /*
 689  * Check for fatal battery errors
 690  * Fatal returns -1
 691  */
 692 static int sharpsl_fatal_check(void)
 693 {
 694         int buff[5], temp, i, acin;
 695
 696         dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
 697
 698         /* Check AC-Adapter */
 699         acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 700
 701         if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
 702                 sharpsl_pm.machinfo->charge(0);
 703                 udelay(100);
 704                 sharpsl_pm.machinfo->discharge(1);      /* enable discharge */
 705                 mdelay(SHARPSL_WAIT_DISCHARGE_ON);
 706         }
 707
 708         if (sharpsl_pm.machinfo->discharge1)
 709                 sharpsl_pm.machinfo->discharge1(1);
 710
 711         /* Check battery : check inserting battery ? */
 712         for (i = 0; i < 5; i++) {
 713                 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 714                 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
 715         }
 716
 717         if (sharpsl_pm.machinfo->discharge1)
 718                 sharpsl_pm.machinfo->discharge1(0);
 719
 720         if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
 721                 udelay(100);
 722                 sharpsl_pm.machinfo->charge(1);
 723                 sharpsl_pm.machinfo->discharge(0);
 724         }
 725
 726         temp = get_select_val(buff);
 727         dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
 728
 729         if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
 730                         (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
 731                 return -1;
 732         return 0;
 733 }
 734
 735 static int sharpsl_off_charge_error(void)
 736 {
 737         dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
 738         sharpsl_pm.machinfo->charge(0);
 739         sharpsl_pm_led(SHARPSL_LED_ERROR);
 740         sharpsl_pm.charge_mode = CHRG_ERROR;
 741         return 1;
 742 }
 743
 744 /*
 745  * Charging Control while suspended
 746  * Return 1 - go straight to sleep
 747  * Return 0 - sleep or wakeup depending on other factors
 748  */
 749 static int sharpsl_off_charge_battery(void)
 750 {
 751         int time;
 752
 753         dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
 754
 755         if (sharpsl_pm.charge_mode == CHRG_OFF) {
 756                 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
 757
 758                 /* AC Check */
 759                 if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
 760                         return sharpsl_off_charge_error();
 761
 762                 /* Start Charging */
 763                 sharpsl_pm_led(SHARPSL_LED_ON);
 764                 sharpsl_pm.machinfo->charge(0);
 765                 mdelay(SHARPSL_CHARGE_WAIT_TIME);
 766                 sharpsl_pm.machinfo->charge(1);
 767
 768                 sharpsl_pm.charge_mode = CHRG_ON;
 769                 sharpsl_pm.full_count = 0;
 770
 771                 return 1;
 772         } else if (sharpsl_pm.charge_mode != CHRG_ON) {
 773                 return 1;
 774         }
 775
 776         if (sharpsl_pm.full_count == 0) {
 777                 int time;
 778
 779                 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
 780
 781                 if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
 782                         return sharpsl_off_charge_error();
 783
 784                 sharpsl_pm.machinfo->charge(0);
 785                 mdelay(SHARPSL_CHARGE_WAIT_TIME);
 786                 sharpsl_pm.machinfo->charge(1);
 787                 sharpsl_pm.charge_mode = CHRG_ON;
 788
 789                 mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
 790
 791                 time = RCNR;
 792                 while (1) {
 793                         /* Check if any wakeup event had occurred */
 794                         if (sharpsl_pm.machinfo->charger_wakeup() != 0)
 795                                 return 0;
 796                         /* Check for timeout */
 797                         if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
 798                                 return 1;
 799                         if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
 800                                 dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
 801                                 sharpsl_pm.full_count++;
 802                                 sharpsl_pm.machinfo->charge(0);
 803                                 mdelay(SHARPSL_CHARGE_WAIT_TIME);
 804                                 sharpsl_pm.machinfo->charge(1);
 805                                 return 1;
 806                         }
 807                 }
 808         }
 809
 810         dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
 811
 812         mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
 813
 814         time = RCNR;
 815         while (1) {
 816                 /* Check if any wakeup event had occurred */
 817                 if (sharpsl_pm.machinfo->charger_wakeup())
 818                         return 0;
 819                 /* Check for timeout */
 820                 if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
 821                         if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
 822                                 dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
 823                                 sharpsl_pm.full_count = 0;
 824                         }
 825                         sharpsl_pm.full_count++;
 826                         return 1;
 827                 }
 828                 if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
 829                         dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
 830                         sharpsl_pm_led(SHARPSL_LED_OFF);
 831                         sharpsl_pm.machinfo->charge(0);
 832                         sharpsl_pm.charge_mode = CHRG_DONE;
 833                         return 1;
 834                 }
 835         }
 836 }
 837 #else
 838 #define sharpsl_pm_suspend      NULL
 839 #define sharpsl_pm_resume       NULL
 840 #endif
 841
 842 static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
 843 {
 844         return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
 845 }
 846
 847 static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
 848 {
 849         return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
 850 }
 851
 852 static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
 853 static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
 854
 855 extern void (*apm_get_power_status)(struct apm_power_info *);
 856
 857 static void sharpsl_apm_get_power_status(struct apm_power_info *info)
 858 {
 859         info->ac_line_status = sharpsl_pm.battstat.ac_status;
 860
 861         if (sharpsl_pm.charge_mode == CHRG_ON)
 862                 info->battery_status = APM_BATTERY_STATUS_CHARGING;
 863         else
 864                 info->battery_status = sharpsl_pm.battstat.mainbat_status;
 865
 866         info->battery_flag = (1 << info->battery_status);
 867         info->battery_life = sharpsl_pm.battstat.mainbat_percent;
 868 }
 869
 870 #ifdef CONFIG_PM
 871 static const struct platform_suspend_ops sharpsl_pm_ops = {
 872         .prepare        = pxa_pm_prepare,
 873         .finish         = pxa_pm_finish,
 874         .enter          = corgi_pxa_pm_enter,
 875         .valid          = suspend_valid_only_mem,
 876 };
 877 #endif
 878
 879 static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
 880 {
 881         int ret;
 882
 883         if (!pdev->dev.platform_data)
 884                 return -EINVAL;
 885
 886         sharpsl_pm.dev = &pdev->dev;
 887         sharpsl_pm.machinfo = pdev->dev.platform_data;
 888         sharpsl_pm.charge_mode = CHRG_OFF;
 889         sharpsl_pm.flags = 0;
 890
 891         init_timer(&sharpsl_pm.ac_timer);
 892         sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
 893
 894         init_timer(&sharpsl_pm.chrg_full_timer);
 895         sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
 896
 897         led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
 898
 899         sharpsl_pm.machinfo->init();
 900
 901         gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
 902         gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
 903         gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
 904         gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
 905         gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
 906         gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
 907
 908         /* Register interrupt handlers */
 909         if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
 910                 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
 911         }
 912
 913         if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
 914                 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
 915         }
 916
 917         if (sharpsl_pm.machinfo->gpio_fatal) {
 918                 if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
 919                         dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
 920                 }
 921         }
 922
 923         if (sharpsl_pm.machinfo->batfull_irq) {
 924                 /* Register interrupt handler. */
 925                 if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
 926                         dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
 927                 }
 928         }
 929
 930         ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
 931         ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
 932         if (ret != 0)
 933                 dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
 934
 935         apm_get_power_status = sharpsl_apm_get_power_status;
 936
 937 #ifdef CONFIG_PM
 938         suspend_set_ops(&sharpsl_pm_ops);
 939 #endif
 940
 941         mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
 942
 943         return 0;
 944 }
 945
 946 static int sharpsl_pm_remove(struct platform_device *pdev)
 947 {
 948         suspend_set_ops(NULL);
 949
 950         device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
 951         device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
 952
 953         led_trigger_unregister_simple(sharpsl_charge_led_trigger);
 954
 955         free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
 956         free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
 957
 958         if (sharpsl_pm.machinfo->gpio_fatal)
 959                 free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
 960
 961         if (sharpsl_pm.machinfo->batfull_irq)
 962                 free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
 963
 964         gpio_free(sharpsl_pm.machinfo->gpio_batlock);
 965         gpio_free(sharpsl_pm.machinfo->gpio_batfull);
 966         gpio_free(sharpsl_pm.machinfo->gpio_acin);
 967
 968         if (sharpsl_pm.machinfo->exit)
 969                 sharpsl_pm.machinfo->exit();
 970
 971         del_timer_sync(&sharpsl_pm.chrg_full_timer);
 972         del_timer_sync(&sharpsl_pm.ac_timer);
 973
 974         return 0;
 975 }
 976
 977 static struct platform_driver sharpsl_pm_driver = {
 978         .probe          = sharpsl_pm_probe,
 979         .remove         = sharpsl_pm_remove,
 980         .suspend        = sharpsl_pm_suspend,
 981         .resume         = sharpsl_pm_resume,
 982         .driver         = {
 983                 .name           = "sharpsl-pm",
 984         },
 985 };
 986
 987 static int __devinit sharpsl_pm_init(void)
 988 {
 989         return platform_driver_register(&sharpsl_pm_driver);
 990 }
 991
 992 static void sharpsl_pm_exit(void)
 993 {
 994         platform_driver_unregister(&sharpsl_pm_driver);
 995 }
 996
 997 late_initcall(sharpsl_pm_init);
 998 module_exit(sharpsl_pm_exit);