Pileus Git - ~andy/linux/blob - arch/arm/mach-omap2/pm34xx.c

   1 /*
   2  * OMAP3 Power Management Routines
   3  *
   4  * Copyright (C) 2006-2008 Nokia Corporation
   5  * Tony Lindgren <tony@atomide.com>
   6  * Jouni Hogander
   7  *
   8  * Copyright (C) 2007 Texas Instruments, Inc.
   9  * Rajendra Nayak <rnayak@ti.com>
  10  *
  11  * Copyright (C) 2005 Texas Instruments, Inc.
  12  * Richard Woodruff <r-woodruff2@ti.com>
  13  *
  14  * Based on pm.c for omap1
  15  *
  16  * This program is free software; you can redistribute it and/or modify
  17  * it under the terms of the GNU General Public License version 2 as
  18  * published by the Free Software Foundation.
  19  */
  20
  21 #include <linux/pm.h>
  22 #include <linux/suspend.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/module.h>
  25 #include <linux/list.h>
  26 #include <linux/err.h>
  27 #include <linux/gpio.h>
  28 #include <linux/clk.h>
  29 #include <linux/delay.h>
  30 #include <linux/slab.h>
  31 #include <trace/events/power.h>
  32
  33 #include <asm/suspend.h>
  34 #include <asm/system_misc.h>
  35
  36 #include <plat/sram.h>
  37 #include "clockdomain.h"
  38 #include "powerdomain.h"
  39 #include <plat/sdrc.h>
  40 #include <plat/prcm.h>
  41 #include <plat/gpmc.h>
  42 #include <plat/dma.h>
  43
  44 #include "common.h"
  45 #include "cm2xxx_3xxx.h"
  46 #include "cm-regbits-34xx.h"
  47 #include "prm-regbits-34xx.h"
  48
  49 #include "prm2xxx_3xxx.h"
  50 #include "pm.h"
  51 #include "sdrc.h"
  52 #include "control.h"
  53
  54 /* pm34xx errata defined in pm.h */
  55 u16 pm34xx_errata;
  56
  57 struct power_state {
  58         struct powerdomain *pwrdm;
  59         u32 next_state;
  60 #ifdef CONFIG_SUSPEND
  61         u32 saved_state;
  62 #endif
  63         struct list_head node;
  64 };
  65
  66 static LIST_HEAD(pwrst_list);
  67
  68 static int (*_omap_save_secure_sram)(u32 *addr);
  69 void (*omap3_do_wfi_sram)(void);
  70
  71 static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
  72 static struct powerdomain *core_pwrdm, *per_pwrdm;
  73 static struct powerdomain *cam_pwrdm;
  74
  75 static void omap3_core_save_context(void)
  76 {
  77         omap3_ctrl_save_padconf();
  78
  79         /*
  80          * Force write last pad into memory, as this can fail in some
  81          * cases according to errata 1.157, 1.185
  82          */
  83         omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
  84                 OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
  85
  86         /* Save the Interrupt controller context */
  87         omap_intc_save_context();
  88         /* Save the GPMC context */
  89         omap3_gpmc_save_context();
  90         /* Save the system control module context, padconf already save above*/
  91         omap3_control_save_context();
  92         omap_dma_global_context_save();
  93 }
  94
  95 static void omap3_core_restore_context(void)
  96 {
  97         /* Restore the control module context, padconf restored by h/w */
  98         omap3_control_restore_context();
  99         /* Restore the GPMC context */
 100         omap3_gpmc_restore_context();
 101         /* Restore the interrupt controller context */
 102         omap_intc_restore_context();
 103         omap_dma_global_context_restore();
 104 }
 105
 106 /*
 107  * FIXME: This function should be called before entering off-mode after
 108  * OMAP3 secure services have been accessed. Currently it is only called
 109  * once during boot sequence, but this works as we are not using secure
 110  * services.
 111  */
 112 static void omap3_save_secure_ram_context(void)
 113 {
 114         u32 ret;
 115         int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 116
 117         if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 118                 /*
 119                  * MPU next state must be set to POWER_ON temporarily,
 120                  * otherwise the WFI executed inside the ROM code
 121                  * will hang the system.
 122                  */
 123                 pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 124                 ret = _omap_save_secure_sram((u32 *)
 125                                 __pa(omap3_secure_ram_storage));
 126                 pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 127                 /* Following is for error tracking, it should not happen */
 128                 if (ret) {
 129                         pr_err("save_secure_sram() returns %08x\n", ret);
 130                         while (1)
 131                                 ;
 132                 }
 133         }
 134 }
 135
 136 /*
 137  * PRCM Interrupt Handler Helper Function
 138  *
 139  * The purpose of this function is to clear any wake-up events latched
 140  * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
 141  * may occur whilst attempting to clear a PM_WKST_x register and thus
 142  * set another bit in this register. A while loop is used to ensure
 143  * that any peripheral wake-up events occurring while attempting to
 144  * clear the PM_WKST_x are detected and cleared.
 145  */
 146 static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
 147 {
 148         u32 wkst, fclk, iclk, clken;
 149         u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
 150         u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
 151         u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
 152         u16 grpsel_off = (regs == 3) ?
 153                 OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
 154         int c = 0;
 155
 156         wkst = omap2_prm_read_mod_reg(module, wkst_off);
 157         wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
 158         wkst &= ~ignore_bits;
 159         if (wkst) {
 160                 iclk = omap2_cm_read_mod_reg(module, iclk_off);
 161                 fclk = omap2_cm_read_mod_reg(module, fclk_off);
 162                 while (wkst) {
 163                         clken = wkst;
 164                         omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
 165                         /*
 166                          * For USBHOST, we don't know whether HOST1 or
 167                          * HOST2 woke us up, so enable both f-clocks
 168                          */
 169                         if (module == OMAP3430ES2_USBHOST_MOD)
 170                                 clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
 171                         omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
 172                         omap2_prm_write_mod_reg(wkst, module, wkst_off);
 173                         wkst = omap2_prm_read_mod_reg(module, wkst_off);
 174                         wkst &= ~ignore_bits;
 175                         c++;
 176                 }
 177                 omap2_cm_write_mod_reg(iclk, module, iclk_off);
 178                 omap2_cm_write_mod_reg(fclk, module, fclk_off);
 179         }
 180
 181         return c;
 182 }
 183
 184 static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
 185 {
 186         int c;
 187
 188         c = prcm_clear_mod_irqs(WKUP_MOD, 1,
 189                 ~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
 190
 191         return c ? IRQ_HANDLED : IRQ_NONE;
 192 }
 193
 194 static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
 195 {
 196         int c;
 197
 198         /*
 199          * Clear all except ST_IO and ST_IO_CHAIN for wkup module,
 200          * these are handled in a separate handler to avoid acking
 201          * IO events before parsing in mux code
 202          */
 203         c = prcm_clear_mod_irqs(WKUP_MOD, 1,
 204                 OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
 205         c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
 206         c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
 207         if (omap_rev() > OMAP3430_REV_ES1_0) {
 208                 c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
 209                 c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
 210         }
 211
 212         return c ? IRQ_HANDLED : IRQ_NONE;
 213 }
 214
 215 static void omap34xx_save_context(u32 *save)
 216 {
 217         u32 val;
 218
 219         /* Read Auxiliary Control Register */
 220         asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (val));
 221         *save++ = 1;
 222         *save++ = val;
 223
 224         /* Read L2 AUX ctrl register */
 225         asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (val));
 226         *save++ = 1;
 227         *save++ = val;
 228 }
 229
 230 static int omap34xx_do_sram_idle(unsigned long save_state)
 231 {
 232         omap34xx_cpu_suspend(save_state);
 233         return 0;
 234 }
 235
 236 void omap_sram_idle(void)
 237 {
 238         /* Variable to tell what needs to be saved and restored
 239          * in omap_sram_idle*/
 240         /* save_state = 0 => Nothing to save and restored */
 241         /* save_state = 1 => Only L1 and logic lost */
 242         /* save_state = 2 => Only L2 lost */
 243         /* save_state = 3 => L1, L2 and logic lost */
 244         int save_state = 0;
 245         int mpu_next_state = PWRDM_POWER_ON;
 246         int per_next_state = PWRDM_POWER_ON;
 247         int core_next_state = PWRDM_POWER_ON;
 248         int per_going_off;
 249         int core_prev_state;
 250         u32 sdrc_pwr = 0;
 251
 252         mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 253         switch (mpu_next_state) {
 254         case PWRDM_POWER_ON:
 255         case PWRDM_POWER_RET:
 256                 /* No need to save context */
 257                 save_state = 0;
 258                 break;
 259         case PWRDM_POWER_OFF:
 260                 save_state = 3;
 261                 break;
 262         default:
 263                 /* Invalid state */
 264                 pr_err("Invalid mpu state in sram_idle\n");
 265                 return;
 266         }
 267
 268         /* NEON control */
 269         if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
 270                 pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
 271
 272         /* Enable IO-PAD and IO-CHAIN wakeups */
 273         per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 274         core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
 275
 276         pwrdm_pre_transition();
 277
 278         /* PER */
 279         if (per_next_state < PWRDM_POWER_ON) {
 280                 per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 281                 omap2_gpio_prepare_for_idle(per_going_off);
 282         }
 283
 284         /* CORE */
 285         if (core_next_state < PWRDM_POWER_ON) {
 286                 if (core_next_state == PWRDM_POWER_OFF) {
 287                         omap3_core_save_context();
 288                         omap3_cm_save_context();
 289                 }
 290         }
 291
 292         omap3_intc_prepare_idle();
 293
 294         /*
 295          * On EMU/HS devices ROM code restores a SRDC value
 296          * from scratchpad which has automatic self refresh on timeout
 297          * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
 298          * Hence store/restore the SDRC_POWER register here.
 299          */
 300         if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
 301             (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
 302              omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
 303             core_next_state == PWRDM_POWER_OFF)
 304                 sdrc_pwr = sdrc_read_reg(SDRC_POWER);
 305
 306         /*
 307          * omap3_arm_context is the location where some ARM context
 308          * get saved. The rest is placed on the stack, and restored
 309          * from there before resuming.
 310          */
 311         if (save_state)
 312                 omap34xx_save_context(omap3_arm_context);
 313         if (save_state == 1 || save_state == 3)
 314                 cpu_suspend(save_state, omap34xx_do_sram_idle);
 315         else
 316                 omap34xx_do_sram_idle(save_state);
 317
 318         /* Restore normal SDRC POWER settings */
 319         if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
 320             (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
 321              omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
 322             core_next_state == PWRDM_POWER_OFF)
 323                 sdrc_write_reg(sdrc_pwr, SDRC_POWER);
 324
 325         /* CORE */
 326         if (core_next_state < PWRDM_POWER_ON) {
 327                 core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
 328                 if (core_prev_state == PWRDM_POWER_OFF) {
 329                         omap3_core_restore_context();
 330                         omap3_cm_restore_context();
 331                         omap3_sram_restore_context();
 332                         omap2_sms_restore_context();
 333                 }
 334                 if (core_next_state == PWRDM_POWER_OFF)
 335                         omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 336                                                OMAP3430_GR_MOD,
 337                                                OMAP3_PRM_VOLTCTRL_OFFSET);
 338         }
 339         omap3_intc_resume_idle();
 340
 341         pwrdm_post_transition();
 342
 343         /* PER */
 344         if (per_next_state < PWRDM_POWER_ON)
 345                 omap2_gpio_resume_after_idle();
 346
 347         clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 348 }
 349
 350 static void omap3_pm_idle(void)
 351 {
 352         local_fiq_disable();
 353
 354         if (omap_irq_pending())
 355                 goto out;
 356
 357         trace_power_start(POWER_CSTATE, 1, smp_processor_id());
 358         trace_cpu_idle(1, smp_processor_id());
 359
 360         omap_sram_idle();
 361
 362         trace_power_end(smp_processor_id());
 363         trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
 364
 365 out:
 366         local_fiq_enable();
 367 }
 368
 369 #ifdef CONFIG_SUSPEND
 370 static int omap3_pm_suspend(void)
 371 {
 372         struct power_state *pwrst;
 373         int state, ret = 0;
 374
 375         /* Read current next_pwrsts */
 376         list_for_each_entry(pwrst, &pwrst_list, node)
 377                 pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
 378         /* Set ones wanted by suspend */
 379         list_for_each_entry(pwrst, &pwrst_list, node) {
 380                 if (omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
 381                         goto restore;
 382                 if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
 383                         goto restore;
 384         }
 385
 386         omap3_intc_suspend();
 387
 388         omap_sram_idle();
 389
 390 restore:
 391         /* Restore next_pwrsts */
 392         list_for_each_entry(pwrst, &pwrst_list, node) {
 393                 state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 394                 if (state > pwrst->next_state) {
 395                         pr_info("Powerdomain (%s) didn't enter "
 396                                 "target state %d\n",
 397                                pwrst->pwrdm->name, pwrst->next_state);
 398                         ret = -1;
 399                 }
 400                 omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 401         }
 402         if (ret)
 403                 pr_err("Could not enter target state in pm_suspend\n");
 404         else
 405                 pr_info("Successfully put all powerdomains to target state\n");
 406
 407         return ret;
 408 }
 409
 410 #endif /* CONFIG_SUSPEND */
 411
 412
 413 /**
 414  * omap3_iva_idle(): ensure IVA is in idle so it can be put into
 415  *                   retention
 416  *
 417  * In cases where IVA2 is activated by bootcode, it may prevent
 418  * full-chip retention or off-mode because it is not idle.  This
 419  * function forces the IVA2 into idle state so it can go
 420  * into retention/off and thus allow full-chip retention/off.
 421  *
 422  **/
 423 static void __init omap3_iva_idle(void)
 424 {
 425         /* ensure IVA2 clock is disabled */
 426         omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
 427
 428         /* if no clock activity, nothing else to do */
 429         if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
 430               OMAP3430_CLKACTIVITY_IVA2_MASK))
 431                 return;
 432
 433         /* Reset IVA2 */
 434         omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
 435                           OMAP3430_RST2_IVA2_MASK |
 436                           OMAP3430_RST3_IVA2_MASK,
 437                           OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 438
 439         /* Enable IVA2 clock */
 440         omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
 441                          OMAP3430_IVA2_MOD, CM_FCLKEN);
 442
 443         /* Set IVA2 boot mode to 'idle' */
 444         omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
 445                          OMAP343X_CONTROL_IVA2_BOOTMOD);
 446
 447         /* Un-reset IVA2 */
 448         omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 449
 450         /* Disable IVA2 clock */
 451         omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
 452
 453         /* Reset IVA2 */
 454         omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
 455                           OMAP3430_RST2_IVA2_MASK |
 456                           OMAP3430_RST3_IVA2_MASK,
 457                           OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 458 }
 459
 460 static void __init omap3_d2d_idle(void)
 461 {
 462         u16 mask, padconf;
 463
 464         /* In a stand alone OMAP3430 where there is not a stacked
 465          * modem for the D2D Idle Ack and D2D MStandby must be pulled
 466          * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
 467          * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
 468         mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
 469         padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
 470         padconf |= mask;
 471         omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
 472
 473         padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
 474         padconf |= mask;
 475         omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
 476
 477         /* reset modem */
 478         omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
 479                           OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
 480                           CORE_MOD, OMAP2_RM_RSTCTRL);
 481         omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
 482 }
 483
 484 static void __init prcm_setup_regs(void)
 485 {
 486         u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
 487                                         OMAP3630_EN_UART4_MASK : 0;
 488         u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
 489                                         OMAP3630_GRPSEL_UART4_MASK : 0;
 490
 491         /* XXX This should be handled by hwmod code or SCM init code */
 492         omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
 493
 494         /*
 495          * Enable control of expternal oscillator through
 496          * sys_clkreq. In the long run clock framework should
 497          * take care of this.
 498          */
 499         omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
 500                              1 << OMAP_AUTOEXTCLKMODE_SHIFT,
 501                              OMAP3430_GR_MOD,
 502                              OMAP3_PRM_CLKSRC_CTRL_OFFSET);
 503
 504         /* setup wakup source */
 505         omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
 506                           OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
 507                           WKUP_MOD, PM_WKEN);
 508         /* No need to write EN_IO, that is always enabled */
 509         omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
 510                           OMAP3430_GRPSEL_GPT1_MASK |
 511                           OMAP3430_GRPSEL_GPT12_MASK,
 512                           WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
 513
 514         /* Enable PM_WKEN to support DSS LPR */
 515         omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
 516                                 OMAP3430_DSS_MOD, PM_WKEN);
 517
 518         /* Enable wakeups in PER */
 519         omap2_prm_write_mod_reg(omap3630_en_uart4_mask |
 520                           OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
 521                           OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
 522                           OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
 523                           OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
 524                           OMAP3430_EN_MCBSP4_MASK,
 525                           OMAP3430_PER_MOD, PM_WKEN);
 526         /* and allow them to wake up MPU */
 527         omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask |
 528                           OMAP3430_GRPSEL_GPIO2_MASK |
 529                           OMAP3430_GRPSEL_GPIO3_MASK |
 530                           OMAP3430_GRPSEL_GPIO4_MASK |
 531                           OMAP3430_GRPSEL_GPIO5_MASK |
 532                           OMAP3430_GRPSEL_GPIO6_MASK |
 533                           OMAP3430_GRPSEL_UART3_MASK |
 534                           OMAP3430_GRPSEL_MCBSP2_MASK |
 535                           OMAP3430_GRPSEL_MCBSP3_MASK |
 536                           OMAP3430_GRPSEL_MCBSP4_MASK,
 537                           OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 538
 539         /* Don't attach IVA interrupts */
 540         omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
 541         omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
 542         omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
 543         omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
 544
 545         /* Clear any pending 'reset' flags */
 546         omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
 547         omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
 548         omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
 549         omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
 550         omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
 551         omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
 552         omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
 553
 554         /* Clear any pending PRCM interrupts */
 555         omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 556
 557         omap3_iva_idle();
 558         omap3_d2d_idle();
 559 }
 560
 561 void omap3_pm_off_mode_enable(int enable)
 562 {
 563         struct power_state *pwrst;
 564         u32 state;
 565
 566         if (enable)
 567                 state = PWRDM_POWER_OFF;
 568         else
 569                 state = PWRDM_POWER_RET;
 570
 571         list_for_each_entry(pwrst, &pwrst_list, node) {
 572                 if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) &&
 573                                 pwrst->pwrdm == core_pwrdm &&
 574                                 state == PWRDM_POWER_OFF) {
 575                         pwrst->next_state = PWRDM_POWER_RET;
 576                         pr_warn("%s: Core OFF disabled due to errata i583\n",
 577                                 __func__);
 578                 } else {
 579                         pwrst->next_state = state;
 580                 }
 581                 omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
 582         }
 583 }
 584
 585 int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
 586 {
 587         struct power_state *pwrst;
 588
 589         list_for_each_entry(pwrst, &pwrst_list, node) {
 590                 if (pwrst->pwrdm == pwrdm)
 591                         return pwrst->next_state;
 592         }
 593         return -EINVAL;
 594 }
 595
 596 int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state)
 597 {
 598         struct power_state *pwrst;
 599
 600         list_for_each_entry(pwrst, &pwrst_list, node) {
 601                 if (pwrst->pwrdm == pwrdm) {
 602                         pwrst->next_state = state;
 603                         return 0;
 604                 }
 605         }
 606         return -EINVAL;
 607 }
 608
 609 static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 610 {
 611         struct power_state *pwrst;
 612
 613         if (!pwrdm->pwrsts)
 614                 return 0;
 615
 616         pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
 617         if (!pwrst)
 618                 return -ENOMEM;
 619         pwrst->pwrdm = pwrdm;
 620         pwrst->next_state = PWRDM_POWER_RET;
 621         list_add(&pwrst->node, &pwrst_list);
 622
 623         if (pwrdm_has_hdwr_sar(pwrdm))
 624                 pwrdm_enable_hdwr_sar(pwrdm);
 625
 626         return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
 627 }
 628
 629 /*
 630  * Push functions to SRAM
 631  *
 632  * The minimum set of functions is pushed to SRAM for execution:
 633  * - omap3_do_wfi for erratum i581 WA,
 634  * - save_secure_ram_context for security extensions.
 635  */
 636 void omap_push_sram_idle(void)
 637 {
 638         omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
 639
 640         if (omap_type() != OMAP2_DEVICE_TYPE_GP)
 641                 _omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
 642                                 save_secure_ram_context_sz);
 643 }
 644
 645 static void __init pm_errata_configure(void)
 646 {
 647         if (cpu_is_omap3630()) {
 648                 pm34xx_errata |= PM_RTA_ERRATUM_i608;
 649                 /* Enable the l2 cache toggling in sleep logic */
 650                 enable_omap3630_toggle_l2_on_restore();
 651                 if (omap_rev() < OMAP3630_REV_ES1_2)
 652                         pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
 653         }
 654 }
 655
 656 int __init omap3_pm_init(void)
 657 {
 658         struct power_state *pwrst, *tmp;
 659         struct clockdomain *neon_clkdm, *mpu_clkdm;
 660         int ret;
 661
 662         if (!omap3_has_io_chain_ctrl())
 663                 pr_warning("PM: no software I/O chain control; some wakeups may be lost\n");
 664
 665         pm_errata_configure();
 666
 667         /* XXX prcm_setup_regs needs to be before enabling hw
 668          * supervised mode for powerdomains */
 669         prcm_setup_regs();
 670
 671         ret = request_irq(omap_prcm_event_to_irq("wkup"),
 672                 _prcm_int_handle_wakeup, IRQF_NO_SUSPEND, "pm_wkup", NULL);
 673
 674         if (ret) {
 675                 pr_err("pm: Failed to request pm_wkup irq\n");
 676                 goto err1;
 677         }
 678
 679         /* IO interrupt is shared with mux code */
 680         ret = request_irq(omap_prcm_event_to_irq("io"),
 681                 _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
 682                 omap3_pm_init);
 683         enable_irq(omap_prcm_event_to_irq("io"));
 684
 685         if (ret) {
 686                 pr_err("pm: Failed to request pm_io irq\n");
 687                 goto err2;
 688         }
 689
 690         ret = pwrdm_for_each(pwrdms_setup, NULL);
 691         if (ret) {
 692                 pr_err("Failed to setup powerdomains\n");
 693                 goto err3;
 694         }
 695
 696         (void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
 697
 698         mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 699         if (mpu_pwrdm == NULL) {
 700                 pr_err("Failed to get mpu_pwrdm\n");
 701                 ret = -EINVAL;
 702                 goto err3;
 703         }
 704
 705         neon_pwrdm = pwrdm_lookup("neon_pwrdm");
 706         per_pwrdm = pwrdm_lookup("per_pwrdm");
 707         core_pwrdm = pwrdm_lookup("core_pwrdm");
 708         cam_pwrdm = pwrdm_lookup("cam_pwrdm");
 709
 710         neon_clkdm = clkdm_lookup("neon_clkdm");
 711         mpu_clkdm = clkdm_lookup("mpu_clkdm");
 712
 713 #ifdef CONFIG_SUSPEND
 714         omap_pm_suspend = omap3_pm_suspend;
 715 #endif
 716
 717         arm_pm_idle = omap3_pm_idle;
 718         omap3_idle_init();
 719
 720         /*
 721          * RTA is disabled during initialization as per erratum i608
 722          * it is safer to disable RTA by the bootloader, but we would like
 723          * to be doubly sure here and prevent any mishaps.
 724          */
 725         if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
 726                 omap3630_ctrl_disable_rta();
 727
 728         clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
 729         if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 730                 omap3_secure_ram_storage =
 731                         kmalloc(0x803F, GFP_KERNEL);
 732                 if (!omap3_secure_ram_storage)
 733                         pr_err("Memory allocation failed when "
 734                                "allocating for secure sram context\n");
 735
 736                 local_irq_disable();
 737                 local_fiq_disable();
 738
 739                 omap_dma_global_context_save();
 740                 omap3_save_secure_ram_context();
 741                 omap_dma_global_context_restore();
 742
 743                 local_irq_enable();
 744                 local_fiq_enable();
 745         }
 746
 747         omap3_save_scratchpad_contents();
 748         return ret;
 749
 750 err3:
 751         list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
 752                 list_del(&pwrst->node);
 753                 kfree(pwrst);
 754         }
 755         free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init);
 756 err2:
 757         free_irq(omap_prcm_event_to_irq("wkup"), NULL);
 758 err1:
 759         return ret;
 760 }