2 * Board support file for OMAP4430 based PandaBoard.
4 * Copyright (C) 2010 Texas Instruments
6 * Author: David Anders <x0132446@ti.com>
8 * Based on mach-omap2/board-4430sdp.c
10 * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
12 * Based on mach-omap2/board-3430sdp.c
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
19 #include <linux/kernel.h>
20 #include <linux/init.h>
21 #include <linux/platform_device.h>
22 #include <linux/clk.h>
24 #include <linux/leds.h>
25 #include <linux/gpio.h>
26 #include <linux/usb/otg.h>
27 #include <linux/i2c/twl.h>
28 #include <linux/mfd/twl6040.h>
29 #include <linux/regulator/machine.h>
30 #include <linux/regulator/fixed.h>
31 #include <linux/wl12xx.h>
32 #include <linux/platform_data/omap-abe-twl6040.h>
34 #include <mach/hardware.h>
35 #include <asm/hardware/gic.h>
36 #include <asm/mach-types.h>
37 #include <asm/mach/arch.h>
38 #include <asm/mach/map.h>
39 #include <video/omapdss.h>
41 #include <plat/board.h>
45 #include <video/omap-panel-dvi.h>
50 #include "common-board-devices.h"
52 #define GPIO_HUB_POWER 1
53 #define GPIO_HUB_NRESET 62
54 #define GPIO_WIFI_PMENA 43
55 #define GPIO_WIFI_IRQ 53
56 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
57 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
58 #define HDMI_GPIO_HPD 63 /* Hotplug detect */
60 /* wl127x BT, FM, GPS connectivity chip */
61 static int wl1271_gpios[] = {46, -1, -1};
62 static struct platform_device wl1271_device = {
66 .platform_data = &wl1271_gpios,
70 static struct gpio_led gpio_leds[] = {
72 .name = "pandaboard::status1",
73 .default_trigger = "heartbeat",
77 .name = "pandaboard::status2",
78 .default_trigger = "mmc0",
83 static struct gpio_led_platform_data gpio_led_info = {
85 .num_leds = ARRAY_SIZE(gpio_leds),
88 static struct platform_device leds_gpio = {
92 .platform_data = &gpio_led_info,
96 static struct omap_abe_twl6040_data panda_abe_audio_data = {
98 .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
99 /* HandsFree through expasion connector */
100 .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
101 /* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */
102 .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
103 /* PandaBoard: FM RX, PandaBoardES: audio in */
104 .has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
105 /* No jack detection. */
107 /* MCLK input is 38.4MHz */
108 .mclk_freq = 38400000,
112 static struct platform_device panda_abe_audio = {
113 .name = "omap-abe-twl6040",
116 .platform_data = &panda_abe_audio_data,
120 static struct platform_device btwilink_device = {
125 static struct platform_device *panda_devices[] __initdata = {
132 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
133 .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
134 .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
135 .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
137 .reset_gpio_port[0] = -EINVAL,
138 .reset_gpio_port[1] = -EINVAL,
139 .reset_gpio_port[2] = -EINVAL
142 static struct gpio panda_ehci_gpios[] __initdata = {
143 { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
144 { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
147 static void __init omap4_ehci_init(void)
150 struct clk *phy_ref_clk;
152 /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
153 phy_ref_clk = clk_get(NULL, "auxclk3_ck");
154 if (IS_ERR(phy_ref_clk)) {
155 pr_err("Cannot request auxclk3\n");
158 clk_set_rate(phy_ref_clk, 19200000);
159 clk_enable(phy_ref_clk);
161 /* disable the power to the usb hub prior to init and reset phy+hub */
162 ret = gpio_request_array(panda_ehci_gpios,
163 ARRAY_SIZE(panda_ehci_gpios));
165 pr_err("Unable to initialize EHCI power/reset\n");
169 gpio_export(GPIO_HUB_POWER, 0);
170 gpio_export(GPIO_HUB_NRESET, 0);
171 gpio_set_value(GPIO_HUB_NRESET, 1);
173 usbhs_init(&usbhs_bdata);
175 /* enable power to hub */
176 gpio_set_value(GPIO_HUB_POWER, 1);
179 static struct omap_musb_board_data musb_board_data = {
180 .interface_type = MUSB_INTERFACE_UTMI,
185 static struct omap2_hsmmc_info mmc[] = {
188 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
195 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
198 .ocr_mask = MMC_VDD_165_195,
199 .nonremovable = true,
204 static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
205 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
208 static struct regulator_init_data panda_vmmc5 = {
210 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
212 .num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
213 .consumer_supplies = omap4_panda_vmmc5_supply,
216 static struct fixed_voltage_config panda_vwlan = {
217 .supply_name = "vwl1271",
218 .microvolts = 1800000, /* 1.8V */
219 .gpio = GPIO_WIFI_PMENA,
220 .startup_delay = 70000, /* 70msec */
222 .enabled_at_boot = 0,
223 .init_data = &panda_vmmc5,
226 static struct platform_device omap_vwlan_device = {
227 .name = "reg-fixed-voltage",
230 .platform_data = &panda_vwlan,
234 struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
235 /* PANDA ref clock is 38.4 MHz */
236 .board_ref_clock = 2,
239 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
242 struct platform_device *pdev = container_of(dev,
243 struct platform_device, dev);
244 struct omap_mmc_platform_data *pdata = dev->platform_data;
247 dev_err(dev, "%s: NULL platform data\n", __func__);
250 /* Setting MMC1 Card detect Irq */
252 irq = twl6030_mmc_card_detect_config();
254 dev_err(dev, "%s: Error card detect config(%d)\n",
258 pdata->slots[0].card_detect = twl6030_mmc_card_detect;
263 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
265 struct omap_mmc_platform_data *pdata;
267 /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
269 pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
272 pdata = dev->platform_data;
274 pdata->init = omap4_twl6030_hsmmc_late_init;
277 static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
279 struct omap2_hsmmc_info *c;
281 omap_hsmmc_init(controllers);
282 for (c = controllers; c->mmc; c++)
283 omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
288 static struct twl6040_codec_data twl6040_codec = {
289 /* single-step ramp for headset and handsfree */
290 .hs_left_step = 0x0f,
291 .hs_right_step = 0x0f,
292 .hf_left_step = 0x1d,
293 .hf_right_step = 0x1d,
296 static struct twl6040_platform_data twl6040_data = {
297 .codec = &twl6040_codec,
298 .audpwron_gpio = 127,
299 .irq_base = TWL6040_CODEC_IRQ_BASE,
302 /* Panda board uses the common PMIC configuration */
303 static struct twl4030_platform_data omap4_panda_twldata;
306 * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
307 * is connected as I2C slave device, and can be accessed at address 0x50
309 static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
311 I2C_BOARD_INFO("eeprom", 0x50),
315 static int __init omap4_panda_i2c_init(void)
317 omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
318 TWL_COMMON_REGULATOR_VDAC |
319 TWL_COMMON_REGULATOR_VAUX2 |
320 TWL_COMMON_REGULATOR_VAUX3 |
321 TWL_COMMON_REGULATOR_VMMC |
322 TWL_COMMON_REGULATOR_VPP |
323 TWL_COMMON_REGULATOR_VANA |
324 TWL_COMMON_REGULATOR_VCXIO |
325 TWL_COMMON_REGULATOR_VUSB |
326 TWL_COMMON_REGULATOR_CLK32KG);
327 omap4_pmic_init("twl6030", &omap4_panda_twldata,
328 &twl6040_data, OMAP44XX_IRQ_SYS_2N);
329 omap_register_i2c_bus(2, 400, NULL, 0);
331 * Bus 3 is attached to the DVI port where devices like the pico DLP
332 * projector don't work reliably with 400kHz
334 omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
335 ARRAY_SIZE(panda_i2c_eeprom));
336 omap_register_i2c_bus(4, 400, NULL, 0);
340 #ifdef CONFIG_OMAP_MUX
341 static struct omap_board_mux board_mux[] __initdata = {
342 /* WLAN IRQ - GPIO 53 */
343 OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
344 /* WLAN POWER ENABLE - GPIO 43 */
345 OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
346 /* WLAN SDIO: MMC5 CMD */
347 OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
348 /* WLAN SDIO: MMC5 CLK */
349 OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
350 /* WLAN SDIO: MMC5 DAT[0-3] */
351 OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
352 OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
353 OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
354 OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
355 /* gpio 0 - TFP410 PD */
356 OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
358 OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
360 OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
362 OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
364 OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
366 OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
368 OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
370 OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
372 OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
374 OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
376 OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
378 OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
380 OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
382 OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
384 OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
386 OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
388 OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
390 OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
392 OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
394 OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
396 OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
398 OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
400 OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
402 OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
404 OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
406 OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
408 OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
410 OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
412 OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
413 { .reg_offset = OMAP_MUX_TERMINATOR },
417 #define board_mux NULL
421 #define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
423 /* Using generic display panel */
424 static struct panel_dvi_platform_data omap4_dvi_panel = {
426 .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
429 struct omap_dss_device omap4_panda_dvi_device = {
430 .type = OMAP_DISPLAY_TYPE_DPI,
432 .driver_name = "dvi",
433 .data = &omap4_dvi_panel,
434 .phy.dpi.data_lines = 24,
435 .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
436 .channel = OMAP_DSS_CHANNEL_LCD2,
440 static struct gpio panda_hdmi_gpios[] = {
441 { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
442 { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
443 { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
446 static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
450 status = gpio_request_array(panda_hdmi_gpios,
451 ARRAY_SIZE(panda_hdmi_gpios));
453 pr_err("Cannot request HDMI GPIOs\n");
458 static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
460 gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
463 static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
464 .hpd_gpio = HDMI_GPIO_HPD,
467 static struct omap_dss_device omap4_panda_hdmi_device = {
469 .driver_name = "hdmi_panel",
470 .type = OMAP_DISPLAY_TYPE_HDMI,
471 .platform_enable = omap4_panda_panel_enable_hdmi,
472 .platform_disable = omap4_panda_panel_disable_hdmi,
473 .channel = OMAP_DSS_CHANNEL_DIGIT,
474 .data = &omap4_panda_hdmi_data,
477 static struct omap_dss_device *omap4_panda_dss_devices[] = {
478 &omap4_panda_dvi_device,
479 &omap4_panda_hdmi_device,
482 static struct omap_dss_board_info omap4_panda_dss_data = {
483 .num_devices = ARRAY_SIZE(omap4_panda_dss_devices),
484 .devices = omap4_panda_dss_devices,
485 .default_device = &omap4_panda_dvi_device,
488 void __init omap4_panda_display_init(void)
491 omap_display_init(&omap4_panda_dss_data);
494 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
495 * later have external pull up on the HDMI I2C lines
497 if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
498 omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
502 omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
503 omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
504 omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
507 static void omap4_panda_init_rev(void)
509 if (cpu_is_omap443x()) {
510 /* PandaBoard 4430 */
511 /* ASoC audio configuration */
512 panda_abe_audio_data.card_name = "PandaBoard";
513 panda_abe_audio_data.has_hsmic = 1;
516 /* ASoC audio configuration */
517 panda_abe_audio_data.card_name = "PandaBoardES";
521 static void __init omap4_panda_init(void)
523 int package = OMAP_PACKAGE_CBS;
526 if (omap_rev() == OMAP4430_REV_ES1_0)
527 package = OMAP_PACKAGE_CBL;
528 omap4_mux_init(board_mux, NULL, package);
530 omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
531 ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
533 pr_err("error setting wl12xx data: %d\n", ret);
535 omap4_panda_init_rev();
536 omap4_panda_i2c_init();
537 platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
538 platform_device_register(&omap_vwlan_device);
540 omap_sdrc_init(NULL, NULL);
541 omap4_twl6030_hsmmc_init(mmc);
543 usb_musb_init(&musb_board_data);
544 omap4_panda_display_init();
547 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
548 /* Maintainer: David Anders - Texas Instruments Inc */
549 .atag_offset = 0x100,
550 .reserve = omap_reserve,
551 .map_io = omap4_map_io,
552 .init_early = omap4430_init_early,
553 .init_irq = gic_init_irq,
554 .handle_irq = gic_handle_irq,
555 .init_machine = omap4_panda_init,
556 .timer = &omap4_timer,
557 .restart = omap_prcm_restart,