Pileus Git - ~andy/linux/blob - arch/arm/mach-omap2/board-4430sdp.c

   1 /*
   2  * Board support file for OMAP4430 SDP.
   3  *
   4  * Copyright (C) 2009 Texas Instruments
   5  *
   6  * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
   7  *
   8  * Based on mach-omap2/board-3430sdp.c
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/io.h>
  19 #include <linux/gpio.h>
  20 #include <linux/usb/otg.h>
  21 #include <linux/spi/spi.h>
  22 #include <linux/i2c/twl.h>
  23 #include <linux/gpio_keys.h>
  24 #include <linux/regulator/machine.h>
  25 #include <linux/regulator/fixed.h>
  26 #include <linux/leds.h>
  27 #include <linux/leds_pwm.h>
  28 #include <linux/platform_data/omap4-keypad.h>
  29
  30 #include <mach/hardware.h>
  31 #include <asm/hardware/gic.h>
  32 #include <asm/mach-types.h>
  33 #include <asm/mach/arch.h>
  34 #include <asm/mach/map.h>
  35
  36 #include <plat/board.h>
  37 #include "common.h"
  38 #include <plat/usb.h>
  39 #include <plat/mmc.h>
  40 #include <plat/omap4-keypad.h>
  41 #include <video/omapdss.h>
  42 #include <video/omap-panel-nokia-dsi.h>
  43 #include <video/omap-panel-picodlp.h>
  44 #include <linux/wl12xx.h>
  45 #include <linux/platform_data/omap-abe-twl6040.h>
  46
  47 #include "mux.h"
  48 #include "hsmmc.h"
  49 #include "control.h"
  50 #include "common-board-devices.h"
  51
  52 #define ETH_KS8851_IRQ                  34
  53 #define ETH_KS8851_POWER_ON             48
  54 #define ETH_KS8851_QUART                138
  55 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO        184
  56 #define OMAP4_SFH7741_ENABLE_GPIO               188
  57 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
  58 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
  59 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
  60 #define DISPLAY_SEL_GPIO        59      /* LCD2/PicoDLP switch */
  61 #define DLP_POWER_ON_GPIO       40
  62
  63 #define GPIO_WIFI_PMENA         54
  64 #define GPIO_WIFI_IRQ           53
  65
  66 static const int sdp4430_keymap[] = {
  67         KEY(0, 0, KEY_E),
  68         KEY(0, 1, KEY_R),
  69         KEY(0, 2, KEY_T),
  70         KEY(0, 3, KEY_HOME),
  71         KEY(0, 4, KEY_F5),
  72         KEY(0, 5, KEY_UNKNOWN),
  73         KEY(0, 6, KEY_I),
  74         KEY(0, 7, KEY_LEFTSHIFT),
  75
  76         KEY(1, 0, KEY_D),
  77         KEY(1, 1, KEY_F),
  78         KEY(1, 2, KEY_G),
  79         KEY(1, 3, KEY_SEND),
  80         KEY(1, 4, KEY_F6),
  81         KEY(1, 5, KEY_UNKNOWN),
  82         KEY(1, 6, KEY_K),
  83         KEY(1, 7, KEY_ENTER),
  84
  85         KEY(2, 0, KEY_X),
  86         KEY(2, 1, KEY_C),
  87         KEY(2, 2, KEY_V),
  88         KEY(2, 3, KEY_END),
  89         KEY(2, 4, KEY_F7),
  90         KEY(2, 5, KEY_UNKNOWN),
  91         KEY(2, 6, KEY_DOT),
  92         KEY(2, 7, KEY_CAPSLOCK),
  93
  94         KEY(3, 0, KEY_Z),
  95         KEY(3, 1, KEY_KPPLUS),
  96         KEY(3, 2, KEY_B),
  97         KEY(3, 3, KEY_F1),
  98         KEY(3, 4, KEY_F8),
  99         KEY(3, 5, KEY_UNKNOWN),
 100         KEY(3, 6, KEY_O),
 101         KEY(3, 7, KEY_SPACE),
 102
 103         KEY(4, 0, KEY_W),
 104         KEY(4, 1, KEY_Y),
 105         KEY(4, 2, KEY_U),
 106         KEY(4, 3, KEY_F2),
 107         KEY(4, 4, KEY_VOLUMEUP),
 108         KEY(4, 5, KEY_UNKNOWN),
 109         KEY(4, 6, KEY_L),
 110         KEY(4, 7, KEY_LEFT),
 111
 112         KEY(5, 0, KEY_S),
 113         KEY(5, 1, KEY_H),
 114         KEY(5, 2, KEY_J),
 115         KEY(5, 3, KEY_F3),
 116         KEY(5, 4, KEY_F9),
 117         KEY(5, 5, KEY_VOLUMEDOWN),
 118         KEY(5, 6, KEY_M),
 119         KEY(5, 7, KEY_RIGHT),
 120
 121         KEY(6, 0, KEY_Q),
 122         KEY(6, 1, KEY_A),
 123         KEY(6, 2, KEY_N),
 124         KEY(6, 3, KEY_BACK),
 125         KEY(6, 4, KEY_BACKSPACE),
 126         KEY(6, 5, KEY_UNKNOWN),
 127         KEY(6, 6, KEY_P),
 128         KEY(6, 7, KEY_UP),
 129
 130         KEY(7, 0, KEY_PROG1),
 131         KEY(7, 1, KEY_PROG2),
 132         KEY(7, 2, KEY_PROG3),
 133         KEY(7, 3, KEY_PROG4),
 134         KEY(7, 4, KEY_F4),
 135         KEY(7, 5, KEY_UNKNOWN),
 136         KEY(7, 6, KEY_OK),
 137         KEY(7, 7, KEY_DOWN),
 138 };
 139 static struct omap_device_pad keypad_pads[] = {
 140         {       .name   = "kpd_col1.kpd_col1",
 141                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 142         },
 143         {       .name   = "kpd_col1.kpd_col1",
 144                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 145         },
 146         {       .name   = "kpd_col2.kpd_col2",
 147                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 148         },
 149         {       .name   = "kpd_col3.kpd_col3",
 150                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 151         },
 152         {       .name   = "kpd_col4.kpd_col4",
 153                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 154         },
 155         {       .name   = "kpd_col5.kpd_col5",
 156                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 157         },
 158         {       .name   = "gpmc_a23.kpd_col7",
 159                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 160         },
 161         {       .name   = "gpmc_a22.kpd_col6",
 162                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 163         },
 164         {       .name   = "kpd_row0.kpd_row0",
 165                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 166                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 167         },
 168         {       .name   = "kpd_row1.kpd_row1",
 169                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 170                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 171         },
 172         {       .name   = "kpd_row2.kpd_row2",
 173                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 174                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 175         },
 176         {       .name   = "kpd_row3.kpd_row3",
 177                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 178                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 179         },
 180         {       .name   = "kpd_row4.kpd_row4",
 181                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 182                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 183         },
 184         {       .name   = "kpd_row5.kpd_row5",
 185                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 186                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 187         },
 188         {       .name   = "gpmc_a18.kpd_row6",
 189                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 190                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 191         },
 192         {       .name   = "gpmc_a19.kpd_row7",
 193                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 194                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 195         },
 196 };
 197
 198 static struct matrix_keymap_data sdp4430_keymap_data = {
 199         .keymap                 = sdp4430_keymap,
 200         .keymap_size            = ARRAY_SIZE(sdp4430_keymap),
 201 };
 202
 203 static struct omap4_keypad_platform_data sdp4430_keypad_data = {
 204         .keymap_data            = &sdp4430_keymap_data,
 205         .rows                   = 8,
 206         .cols                   = 8,
 207 };
 208
 209 static struct omap_board_data keypad_data = {
 210         .id                     = 1,
 211         .pads                   = keypad_pads,
 212         .pads_cnt               = ARRAY_SIZE(keypad_pads),
 213 };
 214
 215 static struct gpio_led sdp4430_gpio_leds[] = {
 216         {
 217                 .name   = "omap4:green:debug0",
 218                 .gpio   = 61,
 219         },
 220         {
 221                 .name   = "omap4:green:debug1",
 222                 .gpio   = 30,
 223         },
 224         {
 225                 .name   = "omap4:green:debug2",
 226                 .gpio   = 7,
 227         },
 228         {
 229                 .name   = "omap4:green:debug3",
 230                 .gpio   = 8,
 231         },
 232         {
 233                 .name   = "omap4:green:debug4",
 234                 .gpio   = 50,
 235         },
 236         {
 237                 .name   = "omap4:blue:user",
 238                 .gpio   = 169,
 239         },
 240         {
 241                 .name   = "omap4:red:user",
 242                 .gpio   = 170,
 243         },
 244         {
 245                 .name   = "omap4:green:user",
 246                 .gpio   = 139,
 247         },
 248
 249 };
 250
 251 static struct gpio_keys_button sdp4430_gpio_keys[] = {
 252         {
 253                 .desc                   = "Proximity Sensor",
 254                 .type                   = EV_SW,
 255                 .code                   = SW_FRONT_PROXIMITY,
 256                 .gpio                   = OMAP4_SFH7741_SENSOR_OUTPUT_GPIO,
 257                 .active_low             = 0,
 258         }
 259 };
 260
 261 static struct gpio_led_platform_data sdp4430_led_data = {
 262         .leds   = sdp4430_gpio_leds,
 263         .num_leds       = ARRAY_SIZE(sdp4430_gpio_leds),
 264 };
 265
 266 static struct led_pwm sdp4430_pwm_leds[] = {
 267         {
 268                 .name           = "omap4:green:chrg",
 269                 .pwm_id         = 1,
 270                 .max_brightness = 255,
 271                 .pwm_period_ns  = 7812500,
 272         },
 273 };
 274
 275 static struct led_pwm_platform_data sdp4430_pwm_data = {
 276         .num_leds       = ARRAY_SIZE(sdp4430_pwm_leds),
 277         .leds           = sdp4430_pwm_leds,
 278 };
 279
 280 static struct platform_device sdp4430_leds_pwm = {
 281         .name   = "leds_pwm",
 282         .id     = -1,
 283         .dev    = {
 284                 .platform_data = &sdp4430_pwm_data,
 285         },
 286 };
 287
 288 static int omap_prox_activate(struct device *dev)
 289 {
 290         gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
 291         return 0;
 292 }
 293
 294 static void omap_prox_deactivate(struct device *dev)
 295 {
 296         gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0);
 297 }
 298
 299 static struct gpio_keys_platform_data sdp4430_gpio_keys_data = {
 300         .buttons        = sdp4430_gpio_keys,
 301         .nbuttons       = ARRAY_SIZE(sdp4430_gpio_keys),
 302         .enable         = omap_prox_activate,
 303         .disable        = omap_prox_deactivate,
 304 };
 305
 306 static struct platform_device sdp4430_gpio_keys_device = {
 307         .name   = "gpio-keys",
 308         .id     = -1,
 309         .dev    = {
 310                 .platform_data  = &sdp4430_gpio_keys_data,
 311         },
 312 };
 313
 314 static struct platform_device sdp4430_leds_gpio = {
 315         .name   = "leds-gpio",
 316         .id     = -1,
 317         .dev    = {
 318                 .platform_data = &sdp4430_led_data,
 319         },
 320 };
 321 static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
 322         {
 323                 .modalias               = "ks8851",
 324                 .bus_num                = 1,
 325                 .chip_select            = 0,
 326                 .max_speed_hz           = 24000000,
 327                 /*
 328                  * .irq is set to gpio_to_irq(ETH_KS8851_IRQ)
 329                  * in omap_4430sdp_init
 330                  */
 331         },
 332 };
 333
 334 static struct gpio sdp4430_eth_gpios[] __initdata = {
 335         { ETH_KS8851_POWER_ON,  GPIOF_OUT_INIT_HIGH,    "eth_power"     },
 336         { ETH_KS8851_QUART,     GPIOF_OUT_INIT_HIGH,    "quart"         },
 337         { ETH_KS8851_IRQ,       GPIOF_IN,               "eth_irq"       },
 338 };
 339
 340 static int __init omap_ethernet_init(void)
 341 {
 342         int status;
 343
 344         /* Request of GPIO lines */
 345         status = gpio_request_array(sdp4430_eth_gpios,
 346                                     ARRAY_SIZE(sdp4430_eth_gpios));
 347         if (status)
 348                 pr_err("Cannot request ETH GPIOs\n");
 349
 350         return status;
 351 }
 352
 353 static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
 354         REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
 355         REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
 356 };
 357
 358 static struct regulator_init_data sdp4430_vbat_data = {
 359         .constraints = {
 360                 .always_on      = 1,
 361         },
 362         .num_consumer_supplies  = ARRAY_SIZE(sdp4430_vbat_supply),
 363         .consumer_supplies      = sdp4430_vbat_supply,
 364 };
 365
 366 static struct fixed_voltage_config sdp4430_vbat_pdata = {
 367         .supply_name    = "VBAT",
 368         .microvolts     = 3750000,
 369         .init_data      = &sdp4430_vbat_data,
 370         .gpio           = -EINVAL,
 371 };
 372
 373 static struct platform_device sdp4430_vbat = {
 374         .name           = "reg-fixed-voltage",
 375         .id             = -1,
 376         .dev = {
 377                 .platform_data = &sdp4430_vbat_pdata,
 378         },
 379 };
 380
 381 static struct platform_device sdp4430_dmic_codec = {
 382         .name   = "dmic-codec",
 383         .id     = -1,
 384 };
 385
 386 static struct omap_abe_twl6040_data sdp4430_abe_audio_data = {
 387         .card_name = "SDP4430",
 388         .has_hs         = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 389         .has_hf         = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 390         .has_ep         = 1,
 391         .has_aux        = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 392         .has_vibra      = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 393
 394         .has_dmic       = 1,
 395         .has_hsmic      = 1,
 396         .has_mainmic    = 1,
 397         .has_submic     = 1,
 398         .has_afm        = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 399
 400         .jack_detection = 1,
 401         /* MCLK input is 38.4MHz */
 402         .mclk_freq      = 38400000,
 403 };
 404
 405 static struct platform_device sdp4430_abe_audio = {
 406         .name           = "omap-abe-twl6040",
 407         .id             = -1,
 408         .dev = {
 409                 .platform_data = &sdp4430_abe_audio_data,
 410         },
 411 };
 412
 413 static struct platform_device *sdp4430_devices[] __initdata = {
 414         &sdp4430_gpio_keys_device,
 415         &sdp4430_leds_gpio,
 416         &sdp4430_leds_pwm,
 417         &sdp4430_vbat,
 418         &sdp4430_dmic_codec,
 419         &sdp4430_abe_audio,
 420 };
 421
 422 static struct omap_musb_board_data musb_board_data = {
 423         .interface_type         = MUSB_INTERFACE_UTMI,
 424         .mode                   = MUSB_OTG,
 425         .power                  = 100,
 426 };
 427
 428 static struct omap2_hsmmc_info mmc[] = {
 429         {
 430                 .mmc            = 2,
 431                 .caps           =  MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 432                 .gpio_cd        = -EINVAL,
 433                 .gpio_wp        = -EINVAL,
 434                 .nonremovable   = true,
 435                 .ocr_mask       = MMC_VDD_29_30,
 436                 .no_off_init    = true,
 437         },
 438         {
 439                 .mmc            = 1,
 440                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 441                 .gpio_cd        = -EINVAL,
 442                 .gpio_wp        = -EINVAL,
 443         },
 444         {
 445                 .mmc            = 5,
 446                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
 447                 .pm_caps        = MMC_PM_KEEP_POWER,
 448                 .gpio_cd        = -EINVAL,
 449                 .gpio_wp        = -EINVAL,
 450                 .ocr_mask       = MMC_VDD_165_195,
 451                 .nonremovable   = true,
 452         },
 453         {}      /* Terminator */
 454 };
 455
 456 static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 457         REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 458 };
 459
 460 static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
 461         .supply = "vmmc",
 462         .dev_name = "omap_hsmmc.4",
 463 };
 464
 465 static struct regulator_init_data sdp4430_vmmc5 = {
 466         .constraints = {
 467                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
 468         },
 469         .num_consumer_supplies = 1,
 470         .consumer_supplies = &omap4_sdp4430_vmmc5_supply,
 471 };
 472
 473 static struct fixed_voltage_config sdp4430_vwlan = {
 474         .supply_name            = "vwl1271",
 475         .microvolts             = 1800000, /* 1.8V */
 476         .gpio                   = GPIO_WIFI_PMENA,
 477         .startup_delay          = 70000, /* 70msec */
 478         .enable_high            = 1,
 479         .enabled_at_boot        = 0,
 480         .init_data              = &sdp4430_vmmc5,
 481 };
 482
 483 static struct platform_device omap_vwlan_device = {
 484         .name           = "reg-fixed-voltage",
 485         .id             = 1,
 486         .dev = {
 487                 .platform_data = &sdp4430_vwlan,
 488         },
 489 };
 490
 491 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 492 {
 493         int ret = 0;
 494         struct platform_device *pdev = container_of(dev,
 495                                 struct platform_device, dev);
 496         struct omap_mmc_platform_data *pdata = dev->platform_data;
 497
 498         /* Setting MMC1 Card detect Irq */
 499         if (pdev->id == 0) {
 500                 ret = twl6030_mmc_card_detect_config();
 501                 if (ret)
 502                         pr_err("Failed configuring MMC1 card detect\n");
 503                 pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
 504                                                 MMCDETECT_INTR_OFFSET;
 505                 pdata->slots[0].card_detect = twl6030_mmc_card_detect;
 506         }
 507         return ret;
 508 }
 509
 510 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
 511 {
 512         struct omap_mmc_platform_data *pdata;
 513
 514         /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
 515         if (!dev) {
 516                 pr_err("Failed %s\n", __func__);
 517                 return;
 518         }
 519         pdata = dev->platform_data;
 520         pdata->init =   omap4_twl6030_hsmmc_late_init;
 521 }
 522
 523 static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 524 {
 525         struct omap2_hsmmc_info *c;
 526
 527         omap_hsmmc_init(controllers);
 528         for (c = controllers; c->mmc; c++)
 529                 omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
 530
 531         return 0;
 532 }
 533
 534 static struct regulator_init_data sdp4430_vaux1 = {
 535         .constraints = {
 536                 .min_uV                 = 1000000,
 537                 .max_uV                 = 3000000,
 538                 .apply_uV               = true,
 539                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 540                                         | REGULATOR_MODE_STANDBY,
 541                 .valid_ops_mask  = REGULATOR_CHANGE_VOLTAGE
 542                                         | REGULATOR_CHANGE_MODE
 543                                         | REGULATOR_CHANGE_STATUS,
 544         },
 545         .num_consumer_supplies  = ARRAY_SIZE(sdp4430_vaux_supply),
 546         .consumer_supplies      = sdp4430_vaux_supply,
 547 };
 548
 549 static struct regulator_init_data sdp4430_vusim = {
 550         .constraints = {
 551                 .min_uV                 = 1200000,
 552                 .max_uV                 = 2900000,
 553                 .apply_uV               = true,
 554                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 555                                         | REGULATOR_MODE_STANDBY,
 556                 .valid_ops_mask  = REGULATOR_CHANGE_VOLTAGE
 557                                         | REGULATOR_CHANGE_MODE
 558                                         | REGULATOR_CHANGE_STATUS,
 559         },
 560 };
 561
 562 static struct twl4030_codec_data twl6040_codec = {
 563         /* single-step ramp for headset and handsfree */
 564         .hs_left_step   = 0x0f,
 565         .hs_right_step  = 0x0f,
 566         .hf_left_step   = 0x1d,
 567         .hf_right_step  = 0x1d,
 568 };
 569
 570 static struct twl4030_vibra_data twl6040_vibra = {
 571         .vibldrv_res = 8,
 572         .vibrdrv_res = 3,
 573         .viblmotor_res = 10,
 574         .vibrmotor_res = 10,
 575         .vddvibl_uV = 0,        /* fixed volt supply - VBAT */
 576         .vddvibr_uV = 0,        /* fixed volt supply - VBAT */
 577 };
 578
 579 static struct twl4030_audio_data twl6040_audio = {
 580         .codec          = &twl6040_codec,
 581         .vibra          = &twl6040_vibra,
 582         .audpwron_gpio  = 127,
 583         .naudint_irq    = OMAP44XX_IRQ_SYS_2N,
 584         .irq_base       = TWL6040_CODEC_IRQ_BASE,
 585 };
 586
 587 static struct twl4030_platform_data sdp4430_twldata = {
 588         .audio          = &twl6040_audio,
 589         /* Regulators */
 590         .vusim          = &sdp4430_vusim,
 591         .vaux1          = &sdp4430_vaux1,
 592 };
 593
 594 static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
 595         {
 596                 I2C_BOARD_INFO("tmp105", 0x48),
 597         },
 598         {
 599                 I2C_BOARD_INFO("bh1780", 0x29),
 600         },
 601 };
 602 static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
 603         {
 604                 I2C_BOARD_INFO("hmc5843", 0x1e),
 605         },
 606 };
 607 static int __init omap4_i2c_init(void)
 608 {
 609         omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
 610                         TWL_COMMON_REGULATOR_VDAC |
 611                         TWL_COMMON_REGULATOR_VAUX2 |
 612                         TWL_COMMON_REGULATOR_VAUX3 |
 613                         TWL_COMMON_REGULATOR_VMMC |
 614                         TWL_COMMON_REGULATOR_VPP |
 615                         TWL_COMMON_REGULATOR_VANA |
 616                         TWL_COMMON_REGULATOR_VCXIO |
 617                         TWL_COMMON_REGULATOR_VUSB |
 618                         TWL_COMMON_REGULATOR_CLK32KG);
 619         omap4_pmic_init("twl6030", &sdp4430_twldata);
 620         omap_register_i2c_bus(2, 400, NULL, 0);
 621         omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 622                                 ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
 623         omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo,
 624                                 ARRAY_SIZE(sdp4430_i2c_4_boardinfo));
 625         return 0;
 626 }
 627
 628 static void __init omap_sfh7741prox_init(void)
 629 {
 630         int error;
 631
 632         error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO,
 633                                  GPIOF_OUT_INIT_LOW, "sfh7741");
 634         if (error < 0)
 635                 pr_err("%s:failed to request GPIO %d, error %d\n",
 636                         __func__, OMAP4_SFH7741_ENABLE_GPIO, error);
 637 }
 638
 639 static struct gpio sdp4430_hdmi_gpios[] = {
 640         { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
 641         { HDMI_GPIO_LS_OE,      GPIOF_OUT_INIT_HIGH,    "hdmi_gpio_ls_oe" },
 642         { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
 643 };
 644
 645 static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
 646 {
 647         int status;
 648
 649         status = gpio_request_array(sdp4430_hdmi_gpios,
 650                                     ARRAY_SIZE(sdp4430_hdmi_gpios));
 651         if (status)
 652                 pr_err("%s: Cannot request HDMI GPIOs\n", __func__);
 653
 654         return status;
 655 }
 656
 657 static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
 658 {
 659         gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
 660 }
 661
 662 static struct nokia_dsi_panel_data dsi1_panel = {
 663                 .name           = "taal",
 664                 .reset_gpio     = 102,
 665                 .use_ext_te     = false,
 666                 .ext_te_gpio    = 101,
 667                 .esd_interval   = 0,
 668 };
 669
 670 static struct omap_dss_device sdp4430_lcd_device = {
 671         .name                   = "lcd",
 672         .driver_name            = "taal",
 673         .type                   = OMAP_DISPLAY_TYPE_DSI,
 674         .data                   = &dsi1_panel,
 675         .phy.dsi                = {
 676                 .clk_lane       = 1,
 677                 .clk_pol        = 0,
 678                 .data1_lane     = 2,
 679                 .data1_pol      = 0,
 680                 .data2_lane     = 3,
 681                 .data2_pol      = 0,
 682
 683                 .module         = 0,
 684         },
 685
 686         .clocks = {
 687                 .dispc = {
 688                         .channel = {
 689                                 /* Logic Clock = 172.8 MHz */
 690                                 .lck_div        = 1,
 691                                 /* Pixel Clock = 34.56 MHz */
 692                                 .pck_div        = 5,
 693                                 .lcd_clk_src    = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
 694                         },
 695                         .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
 696                 },
 697
 698                 .dsi = {
 699                         .regn           = 16,   /* Fint = 2.4 MHz */
 700                         .regm           = 180,  /* DDR Clock = 216 MHz */
 701                         .regm_dispc     = 5,    /* PLL1_CLK1 = 172.8 MHz */
 702                         .regm_dsi       = 5,    /* PLL1_CLK2 = 172.8 MHz */
 703
 704                         .lp_clk_div     = 10,   /* LP Clock = 8.64 MHz */
 705                         .dsi_fclk_src   = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
 706                 },
 707         },
 708         .channel                = OMAP_DSS_CHANNEL_LCD,
 709 };
 710
 711 static struct nokia_dsi_panel_data dsi2_panel = {
 712                 .name           = "taal",
 713                 .reset_gpio     = 104,
 714                 .use_ext_te     = false,
 715                 .ext_te_gpio    = 103,
 716                 .esd_interval   = 0,
 717 };
 718
 719 static struct omap_dss_device sdp4430_lcd2_device = {
 720         .name                   = "lcd2",
 721         .driver_name            = "taal",
 722         .type                   = OMAP_DISPLAY_TYPE_DSI,
 723         .data                   = &dsi2_panel,
 724         .phy.dsi                = {
 725                 .clk_lane       = 1,
 726                 .clk_pol        = 0,
 727                 .data1_lane     = 2,
 728                 .data1_pol      = 0,
 729                 .data2_lane     = 3,
 730                 .data2_pol      = 0,
 731
 732                 .module         = 1,
 733         },
 734
 735         .clocks = {
 736                 .dispc = {
 737                         .channel = {
 738                                 /* Logic Clock = 172.8 MHz */
 739                                 .lck_div        = 1,
 740                                 /* Pixel Clock = 34.56 MHz */
 741                                 .pck_div        = 5,
 742                                 .lcd_clk_src    = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
 743                         },
 744                         .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
 745                 },
 746
 747                 .dsi = {
 748                         .regn           = 16,   /* Fint = 2.4 MHz */
 749                         .regm           = 180,  /* DDR Clock = 216 MHz */
 750                         .regm_dispc     = 5,    /* PLL1_CLK1 = 172.8 MHz */
 751                         .regm_dsi       = 5,    /* PLL1_CLK2 = 172.8 MHz */
 752
 753                         .lp_clk_div     = 10,   /* LP Clock = 8.64 MHz */
 754                         .dsi_fclk_src   = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
 755                 },
 756         },
 757         .channel                = OMAP_DSS_CHANNEL_LCD2,
 758 };
 759
 760 static void sdp4430_lcd_init(void)
 761 {
 762         int r;
 763
 764         r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
 765                 "lcd1_reset_gpio");
 766         if (r)
 767                 pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
 768
 769         r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
 770                 "lcd2_reset_gpio");
 771         if (r)
 772                 pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
 773 }
 774
 775 static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
 776         .hpd_gpio = HDMI_GPIO_HPD,
 777 };
 778
 779 static struct omap_dss_device sdp4430_hdmi_device = {
 780         .name = "hdmi",
 781         .driver_name = "hdmi_panel",
 782         .type = OMAP_DISPLAY_TYPE_HDMI,
 783         .platform_enable = sdp4430_panel_enable_hdmi,
 784         .platform_disable = sdp4430_panel_disable_hdmi,
 785         .channel = OMAP_DSS_CHANNEL_DIGIT,
 786         .data = &sdp4430_hdmi_data,
 787 };
 788
 789 static struct picodlp_panel_data sdp4430_picodlp_pdata = {
 790         .picodlp_adapter_id     = 2,
 791         .emu_done_gpio          = 44,
 792         .pwrgood_gpio           = 45,
 793 };
 794
 795 static void sdp4430_picodlp_init(void)
 796 {
 797         int r;
 798         const struct gpio picodlp_gpios[] = {
 799                 {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
 800                         "DLP POWER ON"},
 801                 {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
 802                         "DLP EMU DONE"},
 803                 {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
 804                         "DLP PWRGOOD"},
 805         };
 806
 807         r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
 808         if (r)
 809                 pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
 810 }
 811
 812 static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
 813 {
 814         gpio_set_value(DISPLAY_SEL_GPIO, 0);
 815         gpio_set_value(DLP_POWER_ON_GPIO, 1);
 816
 817         return 0;
 818 }
 819
 820 static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
 821 {
 822         gpio_set_value(DLP_POWER_ON_GPIO, 0);
 823         gpio_set_value(DISPLAY_SEL_GPIO, 1);
 824 }
 825
 826 static struct omap_dss_device sdp4430_picodlp_device = {
 827         .name                   = "picodlp",
 828         .driver_name            = "picodlp_panel",
 829         .type                   = OMAP_DISPLAY_TYPE_DPI,
 830         .phy.dpi.data_lines     = 24,
 831         .channel                = OMAP_DSS_CHANNEL_LCD2,
 832         .platform_enable        = sdp4430_panel_enable_picodlp,
 833         .platform_disable       = sdp4430_panel_disable_picodlp,
 834         .data                   = &sdp4430_picodlp_pdata,
 835 };
 836
 837 static struct omap_dss_device *sdp4430_dss_devices[] = {
 838         &sdp4430_lcd_device,
 839         &sdp4430_lcd2_device,
 840         &sdp4430_hdmi_device,
 841         &sdp4430_picodlp_device,
 842 };
 843
 844 static struct omap_dss_board_info sdp4430_dss_data = {
 845         .num_devices    = ARRAY_SIZE(sdp4430_dss_devices),
 846         .devices        = sdp4430_dss_devices,
 847         .default_device = &sdp4430_lcd_device,
 848 };
 849
 850 static void __init omap_4430sdp_display_init(void)
 851 {
 852         int r;
 853
 854         /* Enable LCD2 by default (instead of Pico DLP) */
 855         r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
 856                         "display_sel");
 857         if (r)
 858                 pr_err("%s: Could not get display_sel GPIO\n", __func__);
 859
 860         sdp4430_lcd_init();
 861         sdp4430_picodlp_init();
 862         omap_display_init(&sdp4430_dss_data);
 863         /*
 864          * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
 865          * later have external pull up on the HDMI I2C lines
 866          */
 867         if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
 868                 omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
 869         else
 870                 omap_hdmi_init(0);
 871
 872         omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
 873         omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
 874         omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
 875 }
 876
 877 #ifdef CONFIG_OMAP_MUX
 878 static struct omap_board_mux board_mux[] __initdata = {
 879         OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 880         { .reg_offset = OMAP_MUX_TERMINATOR },
 881 };
 882
 883 #else
 884 #define board_mux       NULL
 885  #endif
 886
 887 static void __init omap4_sdp4430_wifi_mux_init(void)
 888 {
 889         omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
 890                                 OMAP_PIN_OFF_WAKEUPENABLE);
 891         omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
 892
 893         omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
 894                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 895         omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
 896                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 897         omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
 898                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 899         omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
 900                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 901         omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
 902                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 903         omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
 904                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 905
 906 }
 907
 908 static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
 909         .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
 910         .board_ref_clock = WL12XX_REFCLOCK_26,
 911         .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
 912 };
 913
 914 static void __init omap4_sdp4430_wifi_init(void)
 915 {
 916         int ret;
 917
 918         omap4_sdp4430_wifi_mux_init();
 919         ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
 920         if (ret)
 921                 pr_err("Error setting wl12xx data: %d\n", ret);
 922         ret = platform_device_register(&omap_vwlan_device);
 923         if (ret)
 924                 pr_err("Error registering wl12xx device: %d\n", ret);
 925 }
 926
 927 static void __init omap_4430sdp_init(void)
 928 {
 929         int status;
 930         int package = OMAP_PACKAGE_CBS;
 931
 932         if (omap_rev() == OMAP4430_REV_ES1_0)
 933                 package = OMAP_PACKAGE_CBL;
 934         omap4_mux_init(board_mux, NULL, package);
 935
 936         omap4_i2c_init();
 937         omap_sfh7741prox_init();
 938         platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 939         omap_serial_init();
 940         omap_sdrc_init(NULL, NULL);
 941         omap4_sdp4430_wifi_init();
 942         omap4_twl6030_hsmmc_init(mmc);
 943
 944         usb_musb_init(&musb_board_data);
 945
 946         status = omap_ethernet_init();
 947         if (status) {
 948                 pr_err("Ethernet initialization failed: %d\n", status);
 949         } else {
 950                 sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
 951                 spi_register_board_info(sdp4430_spi_board_info,
 952                                 ARRAY_SIZE(sdp4430_spi_board_info));
 953         }
 954
 955         status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
 956         if (status)
 957                 pr_err("Keypad initialization failed: %d\n", status);
 958
 959         omap_4430sdp_display_init();
 960 }
 961
 962 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 963         /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 964         .atag_offset    = 0x100,
 965         .reserve        = omap_reserve,
 966         .map_io         = omap4_map_io,
 967         .init_early     = omap4430_init_early,
 968         .init_irq       = gic_init_irq,
 969         .handle_irq     = gic_handle_irq,
 970         .init_machine   = omap_4430sdp_init,
 971         .timer          = &omap4_timer,
 972         .restart        = omap_prcm_restart,
 973 MACHINE_END