6 depends on ARCH_MULTI_V6
9 select MULTI_IRQ_HANDLER
10 select SOC_HAS_OMAP2_SDRC
14 depends on ARCH_MULTI_V7
17 select ARM_CPU_SUSPEND if PM
19 select MULTI_IRQ_HANDLER
20 select OMAP_INTERCONNECT
22 select PM_RUNTIME if CPU_IDLE
23 select SOC_HAS_OMAP2_SDRC
24 select USB_ARCH_HAS_EHCI if USB_SUPPORT
28 depends on ARCH_MULTI_V7
31 select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
32 select ARM_CPU_SUSPEND if PM
33 select ARM_ERRATA_720789
37 select HAVE_ARM_SCU if SMP
38 select HAVE_ARM_TWD if SMP
40 select OMAP_INTERCONNECT
41 select PL310_ERRATA_588369
42 select PL310_ERRATA_727915
44 select PM_RUNTIME if CPU_IDLE
45 select USB_ARCH_HAS_EHCI if USB_SUPPORT
46 select ARM_ERRATA_754322
47 select ARM_ERRATA_775420
51 depends on ARCH_MULTI_V7
53 select ARM_CPU_SUSPEND if PM
56 select HAVE_ARM_SCU if SMP
57 select HAVE_ARM_TWD if LOCAL_TIMERS
59 select HAVE_ARM_ARCH_TIMER
60 select ARM_ERRATA_798181 if SMP
64 depends on ARCH_MULTI_V7
66 select ARM_CPU_SUSPEND if PM
68 select MULTI_IRQ_HANDLER
72 depends on ARCH_MULTI_V7
75 select MULTI_IRQ_HANDLER
77 select MACH_OMAP_GENERIC
81 select ARCH_HAS_BANDGAP
82 select ARCH_HAS_CPUFREQ
83 select ARCH_HAS_HOLES_MEMORYMODEL
85 select ARCH_REQUIRE_GPIOLIB
88 select GENERIC_CLOCKEVENTS
89 select GENERIC_IRQ_CHIP
90 select MACH_OMAP_GENERIC
93 select PROC_DEVICETREE if PROC_FS
99 Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
104 menu "TI OMAP2/3/4 Specific Features"
106 config ARCH_OMAP2PLUS_TYPICAL
107 bool "Typical OMAP configuration"
113 select MENELAUS if ARCH_OMAP2
114 select NEON if CPU_V7
117 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
118 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
121 Compile a kernel suitable for booting most boards
123 config SOC_HAS_OMAP2_SDRC
124 bool "OMAP2 SDRAM Controller support"
126 config SOC_HAS_REALTIME_COUNTER
127 bool "Real time free running counter"
128 depends on SOC_OMAP5 || SOC_DRA7XX
133 select ARM_ARCH_TIMER
139 comment "OMAP Core Type"
140 depends on ARCH_OMAP2
143 bool "OMAP2420 support"
144 depends on ARCH_OMAP2
147 select SOC_HAS_OMAP2_SDRC
150 bool "OMAP2430 support"
151 depends on ARCH_OMAP2
153 select SOC_HAS_OMAP2_SDRC
156 bool "OMAP3430 support"
157 depends on ARCH_OMAP3
159 select SOC_HAS_OMAP2_SDRC
162 bool "TI81XX support"
163 depends on ARCH_OMAP3
166 config OMAP_PACKAGE_ZAF
169 config OMAP_PACKAGE_ZAC
172 config OMAP_PACKAGE_CBC
175 config OMAP_PACKAGE_CBB
178 config OMAP_PACKAGE_CUS
181 config OMAP_PACKAGE_CBP
184 comment "OMAP Legacy Platform Data Board Type"
185 depends on ARCH_OMAP2PLUS
187 config MACH_OMAP_GENERIC
190 config MACH_OMAP2_TUSB6010
192 depends on ARCH_OMAP2 && SOC_OMAP2420
193 default y if MACH_NOKIA_N8X0
195 config MACH_OMAP3_BEAGLE
196 bool "OMAP3 BEAGLE board"
197 depends on ARCH_OMAP3
199 select OMAP_PACKAGE_CBB
201 config MACH_DEVKIT8000
202 bool "DEVKIT8000 board"
203 depends on ARCH_OMAP3
205 select OMAP_PACKAGE_CUS
208 bool "OMAP3 LDP board"
209 depends on ARCH_OMAP3
211 select OMAP_PACKAGE_CBB
213 config MACH_OMAP3530_LV_SOM
214 bool "OMAP3 Logic 3530 LV SOM board"
215 depends on ARCH_OMAP3
217 select OMAP_PACKAGE_CBB
219 Support for the LogicPD OMAP3530 SOM Development kit
220 for full description please see the products webpage at
221 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
223 config MACH_OMAP3_TORPEDO
224 bool "OMAP3 Logic 35x Torpedo board"
225 depends on ARCH_OMAP3
227 select OMAP_PACKAGE_CBB
229 Support for the LogicPD OMAP35x Torpedo Development kit
230 for full description please see the products webpage at
231 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
234 bool "Gumstix Overo board"
235 depends on ARCH_OMAP3
237 select OMAP_PACKAGE_CBB
239 config MACH_OMAP3517EVM
240 bool "OMAP3517/ AM3517 EVM board"
241 depends on ARCH_OMAP3
243 select OMAP_PACKAGE_CBB
245 config MACH_CRANEBOARD
246 bool "AM3517/05 CRANE board"
247 depends on ARCH_OMAP3
248 select OMAP_PACKAGE_CBB
250 config MACH_OMAP3_PANDORA
252 depends on ARCH_OMAP3
254 select OMAP_PACKAGE_CBB
255 select REGULATOR_FIXED_VOLTAGE if REGULATOR
257 config MACH_TOUCHBOOK
258 bool "OMAP3 Touch Book"
259 depends on ARCH_OMAP3
261 select OMAP_PACKAGE_CBB
263 config MACH_OMAP_3430SDP
264 bool "OMAP 3430 SDP board"
265 depends on ARCH_OMAP3
267 select OMAP_PACKAGE_CBB
269 config MACH_NOKIA_N800
272 config MACH_NOKIA_N810
275 config MACH_NOKIA_N810_WIMAX
278 config MACH_NOKIA_N8X0
279 bool "Nokia N800/N810"
280 depends on SOC_OMAP2420
282 select MACH_NOKIA_N800
283 select MACH_NOKIA_N810
284 select MACH_NOKIA_N810_WIMAX
285 select OMAP_PACKAGE_ZAC
287 config MACH_NOKIA_RX51
288 bool "Nokia N900 (RX-51) phone"
289 depends on ARCH_OMAP3
291 select OMAP_PACKAGE_CBB
294 bool "CompuLab CM-T35/CM-T3730 modules"
295 depends on ARCH_OMAP3
298 select OMAP_PACKAGE_CUS
301 bool "CompuLab CM-T3517 module"
302 depends on ARCH_OMAP3
304 select OMAP_PACKAGE_CBB
310 bool "OMAP3 SBC STALKER board"
311 depends on ARCH_OMAP3
313 select OMAP_PACKAGE_CUS
315 config MACH_TI8168EVM
316 bool "TI8168 Evaluation Module"
317 depends on SOC_TI81XX
320 config MACH_TI8148EVM
321 bool "TI8148 Evaluation Module"
322 depends on SOC_TI81XX
326 bool "OMAP3 debugging peripherals"
327 depends on ARCH_OMAP3
331 Say Y here to enable debugging hardware of omap3
333 config OMAP3_SDRC_AC_TIMING
334 bool "Enable SDRC AC timing register changes"
335 depends on ARCH_OMAP3
338 If you know that none of your system initiators will attempt to
339 access SDRAM during CORE DVFS, select Y here. This should boost
340 SDRAM performance at lower CORE OPPs. There are relatively few
341 users who will wish to say yes at this point - almost everyone will
342 wish to say no. Selecting yes without understanding what is
343 going on could result in system crashes;
345 config OMAP4_ERRATA_I688
346 bool "OMAP4 errata: Async Bridge Corruption"
347 depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
348 select ARCH_HAS_BARRIERS
350 If a data is stalled inside asynchronous bridge because of back
351 pressure, it may be accepted multiple times, creating pointer
352 misalignment that will corrupt next transfers on that data path
353 until next reset of the system (No recovery procedure once the
354 issue is hit, the path remains consistently broken). Async bridge
355 can be found on path between MPU to EMIF and MPU to L3 interconnect.
356 This situation can happen only when the idle is initiated by a
357 Master Request Disconnection (which is trigged by software when
358 executing WFI on CPU).
359 The work-around for this errata needs all the initiators connected
360 through async bridge must ensure that data path is properly drained
361 before issuing WFI. This condition will be met if one Strongly ordered
362 access is performed to the target right before executing the WFI.
363 In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
364 IO barrier ensure that there is no synchronisation loss on initiators
365 operating on both interconnect port simultaneously.