6 depends on ARCH_MULTI_V6
9 select MULTI_IRQ_HANDLER
10 select SOC_HAS_OMAP2_SDRC
14 depends on ARCH_MULTI_V7
17 select ARM_CPU_SUSPEND if PM
19 select MULTI_IRQ_HANDLER
20 select OMAP_INTERCONNECT
22 select PM_RUNTIME if CPU_IDLE
23 select SOC_HAS_OMAP2_SDRC
24 select USB_ARCH_HAS_EHCI if USB_SUPPORT
28 depends on ARCH_MULTI_V7
31 select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
32 select ARM_CPU_SUSPEND if PM
33 select ARM_ERRATA_720789
37 select HAVE_ARM_SCU if SMP
38 select HAVE_ARM_TWD if SMP
40 select OMAP_INTERCONNECT
41 select PL310_ERRATA_588369
42 select PL310_ERRATA_727915
44 select PM_RUNTIME if CPU_IDLE
45 select USB_ARCH_HAS_EHCI if USB_SUPPORT
46 select ARM_ERRATA_754322
47 select ARM_ERRATA_775420
51 depends on ARCH_MULTI_V7
53 select ARM_CPU_SUSPEND if PM
56 select HAVE_ARM_SCU if SMP
57 select HAVE_ARM_TWD if LOCAL_TIMERS
59 select HAVE_ARM_ARCH_TIMER
60 select ARM_ERRATA_798181 if SMP
64 depends on ARCH_MULTI_V7
66 select ARM_CPU_SUSPEND if PM
68 select MULTI_IRQ_HANDLER
72 depends on ARCH_MULTI_V7
75 select MULTI_IRQ_HANDLER
77 select MACH_OMAP_GENERIC
81 select ARCH_HAS_BANDGAP
82 select ARCH_HAS_CPUFREQ
83 select ARCH_HAS_HOLES_MEMORYMODEL
85 select ARCH_REQUIRE_GPIOLIB
88 select GENERIC_CLOCKEVENTS
89 select GENERIC_IRQ_CHIP
90 select MACH_OMAP_GENERIC
93 select PROC_DEVICETREE if PROC_FS
99 Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
104 menu "TI OMAP2/3/4 Specific Features"
106 config ARCH_OMAP2PLUS_TYPICAL
107 bool "Typical OMAP configuration"
113 select MENELAUS if ARCH_OMAP2
114 select NEON if CPU_V7
117 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
118 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
121 Compile a kernel suitable for booting most boards
123 config SOC_HAS_OMAP2_SDRC
124 bool "OMAP2 SDRAM Controller support"
126 config SOC_HAS_REALTIME_COUNTER
127 bool "Real time free running counter"
128 depends on SOC_OMAP5 || SOC_DRA7XX
133 select ARM_ARCH_TIMER
139 comment "OMAP Core Type"
140 depends on ARCH_OMAP2
143 bool "OMAP2420 support"
144 depends on ARCH_OMAP2
147 select SOC_HAS_OMAP2_SDRC
150 bool "OMAP2430 support"
151 depends on ARCH_OMAP2
153 select SOC_HAS_OMAP2_SDRC
156 bool "OMAP3430 support"
157 depends on ARCH_OMAP3
159 select SOC_HAS_OMAP2_SDRC
162 bool "TI81XX support"
163 depends on ARCH_OMAP3
166 config OMAP_PACKAGE_ZAF
169 config OMAP_PACKAGE_ZAC
172 config OMAP_PACKAGE_CBC
175 config OMAP_PACKAGE_CBB
178 config OMAP_PACKAGE_CUS
181 config OMAP_PACKAGE_CBP
184 comment "OMAP Legacy Platform Data Board Type"
185 depends on ARCH_OMAP2PLUS
187 config MACH_OMAP_GENERIC
190 config MACH_OMAP2_TUSB6010
192 depends on ARCH_OMAP2 && SOC_OMAP2420
193 default y if MACH_NOKIA_N8X0
195 config MACH_OMAP_2430SDP
196 bool "OMAP 2430 SDP board"
197 depends on SOC_OMAP2430
199 select OMAP_PACKAGE_ZAC
201 config MACH_OMAP3_BEAGLE
202 bool "OMAP3 BEAGLE board"
203 depends on ARCH_OMAP3
205 select OMAP_PACKAGE_CBB
207 config MACH_DEVKIT8000
208 bool "DEVKIT8000 board"
209 depends on ARCH_OMAP3
211 select OMAP_PACKAGE_CUS
214 bool "OMAP3 LDP board"
215 depends on ARCH_OMAP3
217 select OMAP_PACKAGE_CBB
219 config MACH_OMAP3530_LV_SOM
220 bool "OMAP3 Logic 3530 LV SOM board"
221 depends on ARCH_OMAP3
223 select OMAP_PACKAGE_CBB
225 Support for the LogicPD OMAP3530 SOM Development kit
226 for full description please see the products webpage at
227 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
229 config MACH_OMAP3_TORPEDO
230 bool "OMAP3 Logic 35x Torpedo board"
231 depends on ARCH_OMAP3
233 select OMAP_PACKAGE_CBB
235 Support for the LogicPD OMAP35x Torpedo Development kit
236 for full description please see the products webpage at
237 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
240 bool "Gumstix Overo board"
241 depends on ARCH_OMAP3
243 select OMAP_PACKAGE_CBB
245 config MACH_OMAP3517EVM
246 bool "OMAP3517/ AM3517 EVM board"
247 depends on ARCH_OMAP3
249 select OMAP_PACKAGE_CBB
251 config MACH_CRANEBOARD
252 bool "AM3517/05 CRANE board"
253 depends on ARCH_OMAP3
254 select OMAP_PACKAGE_CBB
256 config MACH_OMAP3_PANDORA
258 depends on ARCH_OMAP3
260 select OMAP_PACKAGE_CBB
261 select REGULATOR_FIXED_VOLTAGE if REGULATOR
263 config MACH_TOUCHBOOK
264 bool "OMAP3 Touch Book"
265 depends on ARCH_OMAP3
267 select OMAP_PACKAGE_CBB
269 config MACH_OMAP_3430SDP
270 bool "OMAP 3430 SDP board"
271 depends on ARCH_OMAP3
273 select OMAP_PACKAGE_CBB
275 config MACH_NOKIA_N800
278 config MACH_NOKIA_N810
281 config MACH_NOKIA_N810_WIMAX
284 config MACH_NOKIA_N8X0
285 bool "Nokia N800/N810"
286 depends on SOC_OMAP2420
288 select MACH_NOKIA_N800
289 select MACH_NOKIA_N810
290 select MACH_NOKIA_N810_WIMAX
291 select OMAP_PACKAGE_ZAC
293 config MACH_NOKIA_RX51
294 bool "Nokia N900 (RX-51) phone"
295 depends on ARCH_OMAP3
297 select OMAP_PACKAGE_CBB
300 bool "CompuLab CM-T35/CM-T3730 modules"
301 depends on ARCH_OMAP3
304 select OMAP_PACKAGE_CUS
307 bool "CompuLab CM-T3517 module"
308 depends on ARCH_OMAP3
310 select OMAP_PACKAGE_CBB
316 bool "OMAP3 SBC STALKER board"
317 depends on ARCH_OMAP3
319 select OMAP_PACKAGE_CUS
321 config MACH_TI8168EVM
322 bool "TI8168 Evaluation Module"
323 depends on SOC_TI81XX
326 config MACH_TI8148EVM
327 bool "TI8148 Evaluation Module"
328 depends on SOC_TI81XX
332 bool "OMAP3 debugging peripherals"
333 depends on ARCH_OMAP3
337 Say Y here to enable debugging hardware of omap3
339 config OMAP3_SDRC_AC_TIMING
340 bool "Enable SDRC AC timing register changes"
341 depends on ARCH_OMAP3
344 If you know that none of your system initiators will attempt to
345 access SDRAM during CORE DVFS, select Y here. This should boost
346 SDRAM performance at lower CORE OPPs. There are relatively few
347 users who will wish to say yes at this point - almost everyone will
348 wish to say no. Selecting yes without understanding what is
349 going on could result in system crashes;
351 config OMAP4_ERRATA_I688
352 bool "OMAP4 errata: Async Bridge Corruption"
353 depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
354 select ARCH_HAS_BARRIERS
356 If a data is stalled inside asynchronous bridge because of back
357 pressure, it may be accepted multiple times, creating pointer
358 misalignment that will corrupt next transfers on that data path
359 until next reset of the system (No recovery procedure once the
360 issue is hit, the path remains consistently broken). Async bridge
361 can be found on path between MPU to EMIF and MPU to L3 interconnect.
362 This situation can happen only when the idle is initiated by a
363 Master Request Disconnection (which is trigged by software when
364 executing WFI on CPU).
365 The work-around for this errata needs all the initiators connected
366 through async bridge must ensure that data path is properly drained
367 before issuing WFI. This condition will be met if one Strongly ordered
368 access is performed to the target right before executing the WFI.
369 In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
370 IO barrier ensure that there is no synchronisation loss on initiators
371 operating on both interconnect port simultaneously.