2 * linux/arch/arm/mach-omap1/clock_data.c
4 * Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
5 * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
6 * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 * - Clocks that are only available on some chips should be marked with the
14 * chips that they are present on.
17 #include <linux/kernel.h>
19 #include <linux/clk.h>
20 #include <linux/cpufreq.h>
21 #include <linux/delay.h>
23 #include <asm/mach-types.h> /* for machine_is_* */
25 #include <plat/clock.h>
27 #include <plat/clkdev_omap.h>
28 #include <plat/sram.h> /* for omap_sram_reprogram_clock() */
29 #include <plat/usb.h> /* for OTG_BASE */
31 #include <mach/hardware.h>
36 /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
37 #define IDL_CLKOUT_ARM_SHIFT 12
38 #define IDLTIM_ARM_SHIFT 9
39 #define IDLAPI_ARM_SHIFT 8
40 #define IDLIF_ARM_SHIFT 6
41 #define IDLLB_ARM_SHIFT 4 /* undocumented? */
42 #define OMAP1510_IDLLCD_ARM_SHIFT 3 /* undocumented? */
43 #define IDLPER_ARM_SHIFT 2
44 #define IDLXORP_ARM_SHIFT 1
45 #define IDLWDT_ARM_SHIFT 0
47 /* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */
48 #define CONF_MOD_UART3_CLK_MODE_R 31
49 #define CONF_MOD_UART2_CLK_MODE_R 30
50 #define CONF_MOD_UART1_CLK_MODE_R 29
51 #define CONF_MOD_MMC_SD_CLK_REQ_R 23
52 #define CONF_MOD_MCBSP3_AUXON 20
54 /* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */
55 #define CONF_MOD_SOSSI_CLK_EN_R 16
57 /* Some OTG_SYSCON_2-specific bit fields */
58 #define OTG_SYSCON_2_UHOST_EN_SHIFT 8
60 /* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */
61 #define SOFT_MMC2_DPLL_REQ_SHIFT 13
62 #define SOFT_MMC_DPLL_REQ_SHIFT 12
63 #define SOFT_UART3_DPLL_REQ_SHIFT 11
64 #define SOFT_UART2_DPLL_REQ_SHIFT 10
65 #define SOFT_UART1_DPLL_REQ_SHIFT 9
66 #define SOFT_USB_OTG_DPLL_REQ_SHIFT 8
67 #define SOFT_CAM_DPLL_REQ_SHIFT 7
68 #define SOFT_COM_MCKO_REQ_SHIFT 6
69 #define SOFT_PERIPH_REQ_SHIFT 5 /* sys_ck gate for UART2 ? */
70 #define USB_REQ_EN_SHIFT 4
71 #define SOFT_USB_REQ_SHIFT 3 /* sys_ck gate for USB host? */
72 #define SOFT_SDW_REQ_SHIFT 2 /* sys_ck gate for Bluetooth? */
73 #define SOFT_COM_REQ_SHIFT 1 /* sys_ck gate for com proc? */
74 #define SOFT_DPLL_REQ_SHIFT 0
80 static struct clk ck_ref = {
86 static struct clk ck_dpll1 = {
93 * FIXME: This clock seems to be necessary but no-one has asked for its
94 * activation. [ FIX: SoSSI, SSR ]
96 static struct arm_idlect1_clk ck_dpll1out = {
98 .name = "ck_dpll1out",
99 .ops = &clkops_generic,
101 .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT |
103 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
104 .enable_bit = EN_CKOUT_ARM,
105 .recalc = &followparent_recalc,
107 .idlect_shift = IDL_CLKOUT_ARM_SHIFT,
110 static struct clk sossi_ck = {
112 .ops = &clkops_generic,
113 .parent = &ck_dpll1out.clk,
114 .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
115 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
116 .enable_bit = CONF_MOD_SOSSI_CLK_EN_R,
117 .recalc = &omap1_sossi_recalc,
118 .set_rate = &omap1_set_sossi_rate,
121 static struct clk arm_ck = {
125 .rate_offset = CKCTL_ARMDIV_OFFSET,
126 .recalc = &omap1_ckctl_recalc,
127 .round_rate = omap1_clk_round_rate_ckctl_arm,
128 .set_rate = omap1_clk_set_rate_ckctl_arm,
131 static struct arm_idlect1_clk armper_ck = {
134 .ops = &clkops_generic,
136 .flags = CLOCK_IDLE_CONTROL,
137 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
138 .enable_bit = EN_PERCK,
139 .rate_offset = CKCTL_PERDIV_OFFSET,
140 .recalc = &omap1_ckctl_recalc,
141 .round_rate = omap1_clk_round_rate_ckctl_arm,
142 .set_rate = omap1_clk_set_rate_ckctl_arm,
144 .idlect_shift = IDLPER_ARM_SHIFT,
148 * FIXME: This clock seems to be necessary but no-one has asked for its
149 * activation. [ GPIO code for 1510 ]
151 static struct clk arm_gpio_ck = {
153 .ops = &clkops_generic,
155 .flags = ENABLE_ON_INIT,
156 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
157 .enable_bit = EN_GPIOCK,
158 .recalc = &followparent_recalc,
161 static struct arm_idlect1_clk armxor_ck = {
164 .ops = &clkops_generic,
166 .flags = CLOCK_IDLE_CONTROL,
167 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
168 .enable_bit = EN_XORPCK,
169 .recalc = &followparent_recalc,
171 .idlect_shift = IDLXORP_ARM_SHIFT,
174 static struct arm_idlect1_clk armtim_ck = {
177 .ops = &clkops_generic,
179 .flags = CLOCK_IDLE_CONTROL,
180 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
181 .enable_bit = EN_TIMCK,
182 .recalc = &followparent_recalc,
184 .idlect_shift = IDLTIM_ARM_SHIFT,
187 static struct arm_idlect1_clk armwdt_ck = {
190 .ops = &clkops_generic,
192 .flags = CLOCK_IDLE_CONTROL,
193 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
194 .enable_bit = EN_WDTCK,
196 .recalc = &omap_fixed_divisor_recalc,
198 .idlect_shift = IDLWDT_ARM_SHIFT,
201 static struct clk arminth_ck16xx = {
202 .name = "arminth_ck",
205 .recalc = &followparent_recalc,
206 /* Note: On 16xx the frequency can be divided by 2 by programming
207 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
209 * 1510 version is in TC clocks.
213 static struct clk dsp_ck = {
215 .ops = &clkops_generic,
217 .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL),
218 .enable_bit = EN_DSPCK,
219 .rate_offset = CKCTL_DSPDIV_OFFSET,
220 .recalc = &omap1_ckctl_recalc,
221 .round_rate = omap1_clk_round_rate_ckctl_arm,
222 .set_rate = omap1_clk_set_rate_ckctl_arm,
225 static struct clk dspmmu_ck = {
229 .rate_offset = CKCTL_DSPMMUDIV_OFFSET,
230 .recalc = &omap1_ckctl_recalc,
231 .round_rate = omap1_clk_round_rate_ckctl_arm,
232 .set_rate = omap1_clk_set_rate_ckctl_arm,
235 static struct clk dspper_ck = {
237 .ops = &clkops_dspck,
239 .enable_reg = DSP_IDLECT2,
240 .enable_bit = EN_PERCK,
241 .rate_offset = CKCTL_PERDIV_OFFSET,
242 .recalc = &omap1_ckctl_recalc_dsp_domain,
243 .round_rate = omap1_clk_round_rate_ckctl_arm,
244 .set_rate = &omap1_clk_set_rate_dsp_domain,
247 static struct clk dspxor_ck = {
249 .ops = &clkops_dspck,
251 .enable_reg = DSP_IDLECT2,
252 .enable_bit = EN_XORPCK,
253 .recalc = &followparent_recalc,
256 static struct clk dsptim_ck = {
258 .ops = &clkops_dspck,
260 .enable_reg = DSP_IDLECT2,
261 .enable_bit = EN_DSPTIMCK,
262 .recalc = &followparent_recalc,
265 static struct arm_idlect1_clk tc_ck = {
270 .flags = CLOCK_IDLE_CONTROL,
271 .rate_offset = CKCTL_TCDIV_OFFSET,
272 .recalc = &omap1_ckctl_recalc,
273 .round_rate = omap1_clk_round_rate_ckctl_arm,
274 .set_rate = omap1_clk_set_rate_ckctl_arm,
276 .idlect_shift = IDLIF_ARM_SHIFT,
279 static struct clk arminth_ck1510 = {
280 .name = "arminth_ck",
282 .parent = &tc_ck.clk,
283 .recalc = &followparent_recalc,
284 /* Note: On 1510 the frequency follows TC_CK
286 * 16xx version is in MPU clocks.
290 static struct clk tipb_ck = {
291 /* No-idle controlled by "tc_ck" */
294 .parent = &tc_ck.clk,
295 .recalc = &followparent_recalc,
298 static struct clk l3_ocpi_ck = {
299 /* No-idle controlled by "tc_ck" */
300 .name = "l3_ocpi_ck",
301 .ops = &clkops_generic,
302 .parent = &tc_ck.clk,
303 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
304 .enable_bit = EN_OCPI_CK,
305 .recalc = &followparent_recalc,
308 static struct clk tc1_ck = {
310 .ops = &clkops_generic,
311 .parent = &tc_ck.clk,
312 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
313 .enable_bit = EN_TC1_CK,
314 .recalc = &followparent_recalc,
318 * FIXME: This clock seems to be necessary but no-one has asked for its
319 * activation. [ pm.c (SRAM), CCP, Camera ]
321 static struct clk tc2_ck = {
323 .ops = &clkops_generic,
324 .parent = &tc_ck.clk,
325 .flags = ENABLE_ON_INIT,
326 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
327 .enable_bit = EN_TC2_CK,
328 .recalc = &followparent_recalc,
331 static struct clk dma_ck = {
332 /* No-idle controlled by "tc_ck" */
335 .parent = &tc_ck.clk,
336 .recalc = &followparent_recalc,
339 static struct clk dma_lcdfree_ck = {
340 .name = "dma_lcdfree_ck",
342 .parent = &tc_ck.clk,
343 .recalc = &followparent_recalc,
346 static struct arm_idlect1_clk api_ck = {
349 .ops = &clkops_generic,
350 .parent = &tc_ck.clk,
351 .flags = CLOCK_IDLE_CONTROL,
352 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
353 .enable_bit = EN_APICK,
354 .recalc = &followparent_recalc,
356 .idlect_shift = IDLAPI_ARM_SHIFT,
359 static struct arm_idlect1_clk lb_ck = {
362 .ops = &clkops_generic,
363 .parent = &tc_ck.clk,
364 .flags = CLOCK_IDLE_CONTROL,
365 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
366 .enable_bit = EN_LBCK,
367 .recalc = &followparent_recalc,
369 .idlect_shift = IDLLB_ARM_SHIFT,
372 static struct clk rhea1_ck = {
375 .parent = &tc_ck.clk,
376 .recalc = &followparent_recalc,
379 static struct clk rhea2_ck = {
382 .parent = &tc_ck.clk,
383 .recalc = &followparent_recalc,
386 static struct clk lcd_ck_16xx = {
388 .ops = &clkops_generic,
390 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
391 .enable_bit = EN_LCDCK,
392 .rate_offset = CKCTL_LCDDIV_OFFSET,
393 .recalc = &omap1_ckctl_recalc,
394 .round_rate = omap1_clk_round_rate_ckctl_arm,
395 .set_rate = omap1_clk_set_rate_ckctl_arm,
398 static struct arm_idlect1_clk lcd_ck_1510 = {
401 .ops = &clkops_generic,
403 .flags = CLOCK_IDLE_CONTROL,
404 .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
405 .enable_bit = EN_LCDCK,
406 .rate_offset = CKCTL_LCDDIV_OFFSET,
407 .recalc = &omap1_ckctl_recalc,
408 .round_rate = omap1_clk_round_rate_ckctl_arm,
409 .set_rate = omap1_clk_set_rate_ckctl_arm,
411 .idlect_shift = OMAP1510_IDLLCD_ARM_SHIFT,
415 * XXX The enable_bit here is misused - it simply switches between 12MHz
416 * and 48MHz. Reimplement with clksel.
418 * XXX does this need SYSC register handling?
420 static struct clk uart1_1510 = {
423 /* Direct from ULPD, no real parent */
424 .parent = &armper_ck.clk,
426 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
427 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
428 .enable_bit = CONF_MOD_UART1_CLK_MODE_R,
429 .set_rate = &omap1_set_uart_rate,
430 .recalc = &omap1_uart_recalc,
434 * XXX The enable_bit here is misused - it simply switches between 12MHz
435 * and 48MHz. Reimplement with clksel.
437 * XXX SYSC register handling does not belong in the clock framework
439 static struct uart_clk uart1_16xx = {
442 .ops = &clkops_uart_16xx,
443 /* Direct from ULPD, no real parent */
444 .parent = &armper_ck.clk,
446 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
447 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
448 .enable_bit = CONF_MOD_UART1_CLK_MODE_R,
450 .sysc_addr = 0xfffb0054,
454 * XXX The enable_bit here is misused - it simply switches between 12MHz
455 * and 48MHz. Reimplement with clksel.
457 * XXX does this need SYSC register handling?
459 static struct clk uart2_ck = {
462 /* Direct from ULPD, no real parent */
463 .parent = &armper_ck.clk,
465 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
466 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
467 .enable_bit = CONF_MOD_UART2_CLK_MODE_R,
468 .set_rate = &omap1_set_uart_rate,
469 .recalc = &omap1_uart_recalc,
473 * XXX The enable_bit here is misused - it simply switches between 12MHz
474 * and 48MHz. Reimplement with clksel.
476 * XXX does this need SYSC register handling?
478 static struct clk uart3_1510 = {
481 /* Direct from ULPD, no real parent */
482 .parent = &armper_ck.clk,
484 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
485 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
486 .enable_bit = CONF_MOD_UART3_CLK_MODE_R,
487 .set_rate = &omap1_set_uart_rate,
488 .recalc = &omap1_uart_recalc,
492 * XXX The enable_bit here is misused - it simply switches between 12MHz
493 * and 48MHz. Reimplement with clksel.
495 * XXX SYSC register handling does not belong in the clock framework
497 static struct uart_clk uart3_16xx = {
500 .ops = &clkops_uart_16xx,
501 /* Direct from ULPD, no real parent */
502 .parent = &armper_ck.clk,
504 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
505 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
506 .enable_bit = CONF_MOD_UART3_CLK_MODE_R,
508 .sysc_addr = 0xfffb9854,
511 static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
513 .ops = &clkops_generic,
514 /* Direct from ULPD, no parent */
516 .flags = ENABLE_REG_32BIT,
517 .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
518 .enable_bit = USB_MCLK_EN_BIT,
521 static struct clk usb_hhc_ck1510 = {
522 .name = "usb_hhc_ck",
523 .ops = &clkops_generic,
524 /* Direct from ULPD, no parent */
525 .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
526 .flags = ENABLE_REG_32BIT,
527 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
528 .enable_bit = USB_HOST_HHC_UHOST_EN,
531 static struct clk usb_hhc_ck16xx = {
532 .name = "usb_hhc_ck",
533 .ops = &clkops_generic,
534 /* Direct from ULPD, no parent */
536 /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
537 .flags = ENABLE_REG_32BIT,
538 .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
539 .enable_bit = OTG_SYSCON_2_UHOST_EN_SHIFT
542 static struct clk usb_dc_ck = {
544 .ops = &clkops_generic,
545 /* Direct from ULPD, no parent */
547 .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
548 .enable_bit = USB_REQ_EN_SHIFT,
551 static struct clk usb_dc_ck7xx = {
553 .ops = &clkops_generic,
554 /* Direct from ULPD, no parent */
556 .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
557 .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT,
560 static struct clk uart1_7xx = {
562 .ops = &clkops_generic,
563 /* Direct from ULPD, no parent */
565 .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
569 static struct clk uart2_7xx = {
571 .ops = &clkops_generic,
572 /* Direct from ULPD, no parent */
574 .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
578 static struct clk mclk_1510 = {
580 .ops = &clkops_generic,
581 /* Direct from ULPD, no parent. May be enabled by ext hardware. */
583 .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
584 .enable_bit = SOFT_COM_MCKO_REQ_SHIFT,
587 static struct clk mclk_16xx = {
589 .ops = &clkops_generic,
590 /* Direct from ULPD, no parent. May be enabled by ext hardware. */
591 .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
592 .enable_bit = COM_ULPD_PLL_CLK_REQ,
593 .set_rate = &omap1_set_ext_clk_rate,
594 .round_rate = &omap1_round_ext_clk_rate,
595 .init = &omap1_init_ext_clk,
598 static struct clk bclk_1510 = {
600 .ops = &clkops_generic,
601 /* Direct from ULPD, no parent. May be enabled by ext hardware. */
605 static struct clk bclk_16xx = {
607 .ops = &clkops_generic,
608 /* Direct from ULPD, no parent. May be enabled by ext hardware. */
609 .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
610 .enable_bit = SWD_ULPD_PLL_CLK_REQ,
611 .set_rate = &omap1_set_ext_clk_rate,
612 .round_rate = &omap1_round_ext_clk_rate,
613 .init = &omap1_init_ext_clk,
616 static struct clk mmc1_ck = {
618 .ops = &clkops_generic,
619 /* Functional clock is direct from ULPD, interface clock is ARMPER */
620 .parent = &armper_ck.clk,
622 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
623 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
624 .enable_bit = CONF_MOD_MMC_SD_CLK_REQ_R,
628 * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
629 * CONF_MOD_MCBSP3_AUXON ??
631 static struct clk mmc2_ck = {
633 .ops = &clkops_generic,
634 /* Functional clock is direct from ULPD, interface clock is ARMPER */
635 .parent = &armper_ck.clk,
637 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
638 .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
642 static struct clk mmc3_ck = {
644 .ops = &clkops_generic,
645 /* Functional clock is direct from ULPD, interface clock is ARMPER */
646 .parent = &armper_ck.clk,
648 .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
649 .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
650 .enable_bit = SOFT_MMC_DPLL_REQ_SHIFT,
653 static struct clk virtual_ck_mpu = {
656 .parent = &arm_ck, /* Is smarter alias for */
657 .recalc = &followparent_recalc,
658 .set_rate = &omap1_select_table_rate,
659 .round_rate = &omap1_round_to_table_rate,
662 /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
663 remains active during MPU idle whenever this is enabled */
664 static struct clk i2c_fck = {
667 .flags = CLOCK_NO_IDLE_PARENT,
668 .parent = &armxor_ck.clk,
669 .recalc = &followparent_recalc,
672 static struct clk i2c_ick = {
675 .flags = CLOCK_NO_IDLE_PARENT,
676 .parent = &armper_ck.clk,
677 .recalc = &followparent_recalc,
684 static struct omap_clk omap_clks[] = {
685 /* non-ULPD clocks */
686 CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX),
687 CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX),
689 CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
690 CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
691 CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
692 CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
693 CLK("omap_gpio.0", "ick", &arm_gpio_ck, CK_1510 | CK_310),
694 CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
695 CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
696 CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
697 CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX),
698 CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310),
699 CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310),
700 CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX),
702 CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310),
703 CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310),
704 CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310),
705 CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
706 CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310),
708 CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
709 CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310),
710 CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX),
711 CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX),
712 CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX),
713 CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310),
714 CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
715 CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
716 CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
717 CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
718 CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
719 CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX),
720 CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310),
722 CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310),
723 CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX),
724 CLK(NULL, "uart1_ck", &uart1_7xx, CK_7XX),
725 CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310),
726 CLK(NULL, "uart2_ck", &uart2_7xx, CK_7XX),
727 CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310),
728 CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX),
729 CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
730 CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
731 CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
732 CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
733 CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX),
734 CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
735 CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
736 CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
737 CLK(NULL, "bclk", &bclk_16xx, CK_16XX),
738 CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310),
739 CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX),
740 CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
741 CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX),
742 CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX),
744 CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
745 CLK("omap_i2c.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX),
746 CLK("omap_i2c.1", "ick", &i2c_ick, CK_16XX),
747 CLK("omap_i2c.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX),
748 CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX),
749 CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX),
750 CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX),
751 CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX),
752 CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
753 CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
754 CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
755 CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX),
756 CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310),
757 CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX),
758 CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310),
759 CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
760 CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
761 CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
768 static struct clk_functions omap1_clk_functions = {
769 .clk_enable = omap1_clk_enable,
770 .clk_disable = omap1_clk_disable,
771 .clk_round_rate = omap1_clk_round_rate,
772 .clk_set_rate = omap1_clk_set_rate,
773 .clk_disable_unused = omap1_clk_disable_unused,
776 static void __init omap1_show_rates(void)
778 pr_notice("Clocking rate (xtal/DPLL1/MPU): "
779 "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
780 ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
781 ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
782 arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
787 int __init omap1_clk_init(void)
790 const struct omap_clock_config *info;
791 int crystal_type = 0; /* Default 12 MHz */
794 #ifdef CONFIG_DEBUG_LL
796 * Resets some clocks that may be left on from bootloader,
797 * but leaves serial clocks on.
799 omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
802 /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
803 reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
804 omap_writew(reg, SOFT_REQ_REG);
805 if (!cpu_is_omap15xx())
806 omap_writew(0, SOFT_REQ_REG2);
808 clk_init(&omap1_clk_functions);
810 /* By default all idlect1 clocks are allowed to idle */
811 arm_idlect1_mask = ~0;
813 for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
814 clk_preinit(c->lk.clk);
817 if (cpu_is_omap1710())
819 if (cpu_is_omap16xx())
821 if (cpu_is_omap1510())
823 if (cpu_is_omap7xx())
825 if (cpu_is_omap310())
828 for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
829 if (c->cpu & cpu_mask) {
831 clk_register(c->lk.clk);
834 /* Pointers to these clocks are needed by code in clock.c */
835 api_ck_p = clk_get(NULL, "api_ck");
836 ck_dpll1_p = clk_get(NULL, "ck_dpll1");
837 ck_ref_p = clk_get(NULL, "ck_ref");
839 info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
841 if (!cpu_is_omap15xx())
842 crystal_type = info->system_clock_type;
845 if (cpu_is_omap7xx())
846 ck_ref.rate = 13000000;
847 if (cpu_is_omap16xx() && crystal_type == 2)
848 ck_ref.rate = 19200000;
850 pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
851 "0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
852 omap_readw(ARM_CKCTL));
854 /* We want to be in syncronous scalable mode */
855 omap_writew(0x1000, ARM_SYSST);
859 * Initially use the values set by bootloader. Determine PLL rate and
860 * recalculate dependent clocks as if kernel had changed PLL or
861 * divisors. See also omap1_clk_late_init() that can reprogram dpll1
862 * after the SRAM is initialized.
865 unsigned pll_ctl_val = omap_readw(DPLL_CTL);
867 ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
868 if (pll_ctl_val & 0x10) {
869 /* PLL enabled, apply multiplier and divisor */
870 if (pll_ctl_val & 0xf80)
871 ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
872 ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
874 /* PLL disabled, apply bypass divisor */
875 switch (pll_ctl_val & 0xc) {
887 propagate_rate(&ck_dpll1);
888 /* Cache rates for clocks connected to ck_ref (not dpll1) */
889 propagate_rate(&ck_ref);
891 if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
892 /* Select slicer output as OMAP input clock */
893 omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
894 OMAP7XX_PCC_UPLD_CTRL);
897 /* Amstrad Delta wants BCLK high when inactive */
898 if (machine_is_ams_delta())
899 omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
900 (1 << SDW_MCLK_INV_BIT),
903 /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
904 /* (on 730, bit 13 must not be cleared) */
905 if (cpu_is_omap7xx())
906 omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
908 omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
910 /* Put DSP/MPUI into reset until needed */
911 omap_writew(0, ARM_RSTCT1);
912 omap_writew(1, ARM_RSTCT2);
913 omap_writew(0x400, ARM_IDLECT1);
916 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
917 * of the ARM_IDLECT2 register must be set to zero. The power-on
918 * default value of this bit is one.
920 omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */
923 * Only enable those clocks we will need, let the drivers
924 * enable other clocks as necessary
926 clk_enable(&armper_ck.clk);
927 clk_enable(&armxor_ck.clk);
928 clk_enable(&armtim_ck.clk); /* This should be done by timer code */
930 if (cpu_is_omap15xx())
931 clk_enable(&arm_gpio_ck);
936 #define OMAP1_DPLL1_SANE_VALUE 60000000
938 void __init omap1_clk_late_init(void)
940 unsigned long rate = ck_dpll1.rate;
942 /* Find the highest supported frequency and enable it */
943 if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
944 pr_err("System frequencies not set, using default. Check your config.\n");
946 * Reprogramming the DPLL is tricky, it must be done from SRAM.
948 omap_sram_reprogram_clock(0x2290, 0x0005);
949 ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
951 propagate_rate(&ck_dpll1);
953 loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);