]> Pileus Git - ~andy/linux/blob - arch/arm/mach-omap1/board-voiceblue.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
[~andy/linux] / arch / arm / mach-omap1 / board-voiceblue.c
1 /*
2  * linux/arch/arm/mach-omap1/board-voiceblue.c
3  *
4  * Modified from board-generic.c
5  *
6  * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
7  *
8  * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
14
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/platform_device.h>
18 #include <linux/interrupt.h>
19 #include <linux/irq.h>
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/mtd/physmap.h>
23 #include <linux/notifier.h>
24 #include <linux/reboot.h>
25 #include <linux/serial_8250.h>
26 #include <linux/serial_reg.h>
27 #include <linux/smc91x.h>
28 #include <linux/export.h>
29
30 #include <asm/mach-types.h>
31 #include <asm/mach/arch.h>
32 #include <asm/mach/map.h>
33
34 #include <plat/board-voiceblue.h>
35 #include <plat/flash.h>
36 #include <plat/mux.h>
37 #include <plat/tc.h>
38 #include <plat/usb.h>
39
40 #include <mach/hardware.h>
41
42 #include "common.h"
43
44 static struct plat_serial8250_port voiceblue_ports[] = {
45         {
46                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
47                 .irq            = OMAP_GPIO_IRQ(12),
48                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
49                 .iotype         = UPIO_MEM,
50                 .regshift       = 1,
51                 .uartclk        = 3686400,
52         },
53         {
54                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
55                 .irq            = OMAP_GPIO_IRQ(13),
56                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
57                 .iotype         = UPIO_MEM,
58                 .regshift       = 1,
59                 .uartclk        = 3686400,
60         },
61         {
62                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
63                 .irq            = OMAP_GPIO_IRQ(14),
64                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
65                 .iotype         = UPIO_MEM,
66                 .regshift       = 1,
67                 .uartclk        = 3686400,
68         },
69         {
70                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
71                 .irq            = OMAP_GPIO_IRQ(15),
72                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
73                 .iotype         = UPIO_MEM,
74                 .regshift       = 1,
75                 .uartclk        = 3686400,
76         },
77         { },
78 };
79
80 static struct platform_device serial_device = {
81         .name                   = "serial8250",
82         .id                     = PLAT8250_DEV_PLATFORM1,
83         .dev                    = {
84                 .platform_data  = voiceblue_ports,
85         },
86 };
87
88 static int __init ext_uart_init(void)
89 {
90         if (!machine_is_voiceblue())
91                 return -ENODEV;
92
93         return platform_device_register(&serial_device);
94 }
95 arch_initcall(ext_uart_init);
96
97 static struct physmap_flash_data voiceblue_flash_data = {
98         .width          = 2,
99         .set_vpp        = omap1_set_vpp,
100 };
101
102 static struct resource voiceblue_flash_resource = {
103         .start  = OMAP_CS0_PHYS,
104         .end    = OMAP_CS0_PHYS + SZ_32M - 1,
105         .flags  = IORESOURCE_MEM,
106 };
107
108 static struct platform_device voiceblue_flash_device = {
109         .name           = "physmap-flash",
110         .id             = 0,
111         .dev            = {
112                 .platform_data  = &voiceblue_flash_data,
113         },
114         .num_resources  = 1,
115         .resource       = &voiceblue_flash_resource,
116 };
117
118 static struct smc91x_platdata voiceblue_smc91x_info = {
119         .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
120         .leda   = RPC_LED_100_10,
121         .ledb   = RPC_LED_TX_RX,
122 };
123
124 static struct resource voiceblue_smc91x_resources[] = {
125         [0] = {
126                 .start  = OMAP_CS2_PHYS + 0x300,
127                 .end    = OMAP_CS2_PHYS + 0x300 + 16,
128                 .flags  = IORESOURCE_MEM,
129         },
130         [1] = {
131                 .start  = OMAP_GPIO_IRQ(8),
132                 .end    = OMAP_GPIO_IRQ(8),
133                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
134         },
135 };
136
137 static struct platform_device voiceblue_smc91x_device = {
138         .name           = "smc91x",
139         .id             = 0,
140         .dev    = {
141                 .platform_data  = &voiceblue_smc91x_info,
142         },
143         .num_resources  = ARRAY_SIZE(voiceblue_smc91x_resources),
144         .resource       = voiceblue_smc91x_resources,
145 };
146
147 static struct platform_device *voiceblue_devices[] __initdata = {
148         &voiceblue_flash_device,
149         &voiceblue_smc91x_device,
150 };
151
152 static struct omap_usb_config voiceblue_usb_config __initdata = {
153         .hmc_mode       = 3,
154         .register_host  = 1,
155         .register_dev   = 1,
156         .pins[0]        = 2,
157         .pins[1]        = 6,
158         .pins[2]        = 6,
159 };
160
161 static struct omap_board_config_kernel voiceblue_config[] = {
162 };
163
164 #define MACHINE_PANICED         1
165 #define MACHINE_REBOOTING       2
166 #define MACHINE_REBOOT          4
167 static unsigned long machine_state;
168
169 static int panic_event(struct notifier_block *this, unsigned long event,
170          void *ptr)
171 {
172         if (test_and_set_bit(MACHINE_PANICED, &machine_state))
173                 return NOTIFY_DONE;
174
175         /* Flash power LED */
176         omap_writeb(0x78, OMAP_LPG1_LCR);
177         omap_writeb(0x01, OMAP_LPG1_PMR);       /* Enable clock */
178
179         return NOTIFY_DONE;
180 }
181
182 static struct notifier_block panic_block = {
183         .notifier_call  = panic_event,
184 };
185
186 static int __init voiceblue_setup(void)
187 {
188         if (!machine_is_voiceblue())
189                 return -ENODEV;
190
191         /* Setup panic notifier */
192         atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
193
194         return 0;
195 }
196 postcore_initcall(voiceblue_setup);
197
198 static int wdt_gpio_state;
199
200 void voiceblue_wdt_enable(void)
201 {
202         gpio_direction_output(0, 0);
203         gpio_set_value(0, 1);
204         gpio_set_value(0, 0);
205         wdt_gpio_state = 0;
206 }
207
208 void voiceblue_wdt_disable(void)
209 {
210         gpio_set_value(0, 0);
211         gpio_set_value(0, 1);
212         gpio_set_value(0, 0);
213         gpio_direction_input(0);
214 }
215
216 void voiceblue_wdt_ping(void)
217 {
218         if (test_bit(MACHINE_REBOOT, &machine_state))
219                 return;
220
221         wdt_gpio_state = !wdt_gpio_state;
222         gpio_set_value(0, wdt_gpio_state);
223 }
224
225 static void voiceblue_restart(char mode, const char *cmd)
226 {
227         /*
228          * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
229          * "Global Software Reset Affects Traffic Controller Frequency".
230          */
231         if (cpu_is_omap5912()) {
232                 omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
233                 omap_writew(0x8, ARM_RSTCT1);
234         }
235
236         set_bit(MACHINE_REBOOT, &machine_state);
237         voiceblue_wdt_enable();
238         while (1) ;
239 }
240
241 EXPORT_SYMBOL(voiceblue_wdt_enable);
242 EXPORT_SYMBOL(voiceblue_wdt_disable);
243 EXPORT_SYMBOL(voiceblue_wdt_ping);
244
245 static void __init voiceblue_init(void)
246 {
247         /* mux pins for uarts */
248         omap_cfg_reg(UART1_TX);
249         omap_cfg_reg(UART1_RTS);
250         omap_cfg_reg(UART2_TX);
251         omap_cfg_reg(UART2_RTS);
252         omap_cfg_reg(UART3_TX);
253         omap_cfg_reg(UART3_RX);
254
255         /* Watchdog */
256         gpio_request(0, "Watchdog");
257         /* smc91x reset */
258         gpio_request(7, "SMC91x reset");
259         gpio_direction_output(7, 1);
260         udelay(2);      /* wait at least 100ns */
261         gpio_set_value(7, 0);
262         mdelay(50);     /* 50ms until PHY ready */
263         /* smc91x interrupt pin */
264         gpio_request(8, "SMC91x irq");
265         /* 16C554 reset*/
266         gpio_request(6, "16C554 reset");
267         gpio_direction_output(6, 0);
268         /* 16C554 interrupt pins */
269         gpio_request(12, "16C554 irq");
270         gpio_request(13, "16C554 irq");
271         gpio_request(14, "16C554 irq");
272         gpio_request(15, "16C554 irq");
273         irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
274         irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
275         irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
276         irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
277
278         platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
279         omap_board_config = voiceblue_config;
280         omap_board_config_size = ARRAY_SIZE(voiceblue_config);
281         omap_serial_init();
282         omap1_usb_init(&voiceblue_usb_config);
283         omap_register_i2c_bus(1, 100, NULL, 0);
284
285         /* There is a good chance board is going up, so enable power LED
286          * (it is connected through invertor) */
287         omap_writeb(0x00, OMAP_LPG1_LCR);
288         omap_writeb(0x00, OMAP_LPG1_PMR);       /* Disable clock */
289 }
290
291 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
292         /* Maintainer: Ladislav Michl <michl@2n.cz> */
293         .atag_offset    = 0x100,
294         .map_io         = omap15xx_map_io,
295         .init_early     = omap1_init_early,
296         .reserve        = omap_reserve,
297         .init_irq       = omap1_init_irq,
298         .init_machine   = voiceblue_init,
299         .timer          = &omap1_timer,
300         .restart        = voiceblue_restart,
301 MACHINE_END