]> Pileus Git - ~andy/linux/blob - arch/arm/mach-msm/board-msm7x30.c
Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
[~andy/linux] / arch / arm / mach-msm / board-msm7x30.c
1 /* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
2  *
3  * This program is free software; you can redistribute it and/or modify
4  * it under the terms of the GNU General Public License version 2 and
5  * only version 2 as published by the Free Software Foundation.
6  *
7  * This program is distributed in the hope that it will be useful,
8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
10  * GNU General Public License for more details.
11  *
12  * You should have received a copy of the GNU General Public License
13  * along with this program; if not, write to the Free Software
14  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
15  * 02110-1301, USA.
16  */
17 #include <linux/gpio.h>
18 #include <linux/kernel.h>
19 #include <linux/irq.h>
20 #include <linux/platform_device.h>
21 #include <linux/delay.h>
22 #include <linux/io.h>
23 #include <linux/smsc911x.h>
24 #include <linux/usb/msm_hsusb.h>
25 #include <linux/clkdev.h>
26 #include <linux/memblock.h>
27
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30 #include <asm/memory.h>
31 #include <asm/setup.h>
32
33 #include <mach/msm_iomap.h>
34 #include <mach/dma.h>
35
36 #include <mach/vreg.h>
37 #include "devices.h"
38 #include "gpiomux.h"
39 #include "proc_comm.h"
40 #include "common.h"
41
42 static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
43                 struct meminfo *mi)
44 {
45         for (; tag->hdr.size; tag = tag_next(tag))
46                 if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
47                         tag->u.mem.start = 0;
48                         tag->u.mem.size += SZ_2M;
49                 }
50 }
51
52 static void __init msm7x30_reserve(void)
53 {
54         memblock_remove(0x0, SZ_2M);
55 }
56
57 static int hsusb_phy_init_seq[] = {
58         0x30, 0x32,     /* Enable and set Pre-Emphasis Depth to 20% */
59         0x02, 0x36,     /* Disable CDR Auto Reset feature */
60         -1
61 };
62
63 static struct msm_otg_platform_data msm_otg_pdata = {
64         .phy_init_seq           = hsusb_phy_init_seq,
65         .mode                   = USB_PERIPHERAL,
66         .otg_control            = OTG_PHY_CONTROL,
67 };
68
69 struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
70 #ifdef CONFIG_SERIAL_MSM_CONSOLE
71         [49] = { /* UART2 RFR */
72                 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
73                              GPIOMUX_FUNC_2 | GPIOMUX_VALID,
74         },
75         [50] = { /* UART2 CTS */
76                 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
77                              GPIOMUX_FUNC_2 | GPIOMUX_VALID,
78         },
79         [51] = { /* UART2 RX */
80                 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
81                              GPIOMUX_FUNC_2 | GPIOMUX_VALID,
82         },
83         [52] = { /* UART2 TX */
84                 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
85                              GPIOMUX_FUNC_2 | GPIOMUX_VALID,
86         },
87 #endif
88 };
89
90 static struct platform_device *devices[] __initdata = {
91         &msm_clock_7x30,
92         &msm_device_gpio_7x30,
93 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
94         &msm_device_uart2,
95 #endif
96         &msm_device_smd,
97         &msm_device_otg,
98         &msm_device_hsusb,
99         &msm_device_hsusb_host,
100 };
101
102 static void __init msm7x30_init_irq(void)
103 {
104         msm_init_irq();
105 }
106
107 static void __init msm7x30_init(void)
108 {
109         msm_device_otg.dev.platform_data = &msm_otg_pdata;
110         msm_device_hsusb.dev.parent = &msm_device_otg.dev;
111         msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
112
113         platform_add_devices(devices, ARRAY_SIZE(devices));
114 }
115
116 static void __init msm7x30_map_io(void)
117 {
118         msm_map_msm7x30_io();
119 }
120
121 static void __init msm7x30_init_late(void)
122 {
123         smd_debugfs_init();
124 }
125
126 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
127         .atag_offset = 0x100,
128         .fixup = msm7x30_fixup,
129         .reserve = msm7x30_reserve,
130         .map_io = msm7x30_map_io,
131         .init_irq = msm7x30_init_irq,
132         .init_machine = msm7x30_init,
133         .init_late = msm7x30_init_late,
134         .init_time      = msm7x30_timer_init,
135 MACHINE_END
136
137 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
138         .atag_offset = 0x100,
139         .fixup = msm7x30_fixup,
140         .reserve = msm7x30_reserve,
141         .map_io = msm7x30_map_io,
142         .init_irq = msm7x30_init_irq,
143         .init_machine = msm7x30_init,
144         .init_late = msm7x30_init_late,
145         .init_time      = msm7x30_timer_init,
146 MACHINE_END
147
148 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
149         .atag_offset = 0x100,
150         .fixup = msm7x30_fixup,
151         .reserve = msm7x30_reserve,
152         .map_io = msm7x30_map_io,
153         .init_irq = msm7x30_init_irq,
154         .init_machine = msm7x30_init,
155         .init_late = msm7x30_init_late,
156         .init_time      = msm7x30_timer_init,
157 MACHINE_END