Pileus Git - ~andy/linux/blob - arch/arm/mach-kirkwood/openrd-setup.c

   1 /*
   2  * arch/arm/mach-kirkwood/openrd-setup.c
   3  *
   4  * Marvell OpenRD (Base|Client|Ultimate) Board Setup
   5  *
   6  * This file is licensed under the terms of the GNU General Public
   7  * License version 2.  This program is licensed "as is" without any
   8  * warranty of any kind, whether express or implied.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/mtd/nand.h>
  15 #include <linux/mtd/partitions.h>
  16 #include <linux/ata_platform.h>
  17 #include <linux/mv643xx_eth.h>
  18 #include <linux/i2c.h>
  19 #include <linux/gpio.h>
  20 #include <asm/mach-types.h>
  21 #include <asm/mach/arch.h>
  22 #include <mach/kirkwood.h>
  23 #include <plat/mvsdio.h>
  24 #include "common.h"
  25 #include "mpp.h"
  26
  27 static struct mtd_partition openrd_nand_parts[] = {
  28         {
  29                 .name           = "u-boot",
  30                 .offset         = 0,
  31                 .size           = SZ_1M,
  32                 .mask_flags     = MTD_WRITEABLE
  33         }, {
  34                 .name           = "uImage",
  35                 .offset         = MTDPART_OFS_NXTBLK,
  36                 .size           = SZ_4M
  37         }, {
  38                 .name           = "root",
  39                 .offset         = MTDPART_OFS_NXTBLK,
  40                 .size           = MTDPART_SIZ_FULL
  41         },
  42 };
  43
  44 static struct mv643xx_eth_platform_data openrd_ge00_data = {
  45         .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
  46 };
  47
  48 static struct mv643xx_eth_platform_data openrd_ge01_data = {
  49         .phy_addr       = MV643XX_ETH_PHY_ADDR(24),
  50 };
  51
  52 static struct mv_sata_platform_data openrd_sata_data = {
  53         .n_ports        = 2,
  54 };
  55
  56 static struct mvsdio_platform_data openrd_mvsdio_data = {
  57         .gpio_card_detect = 29, /* MPP29 used as SD card detect */
  58 };
  59
  60 static unsigned int openrd_mpp_config[] __initdata = {
  61         MPP12_SD_CLK,
  62         MPP13_SD_CMD,
  63         MPP14_SD_D0,
  64         MPP15_SD_D1,
  65         MPP16_SD_D2,
  66         MPP17_SD_D3,
  67         MPP28_GPIO,
  68         MPP29_GPIO,
  69         MPP34_GPIO,
  70         0
  71 };
  72
  73 /* Configure MPP for UART1 */
  74 static unsigned int openrd_uart1_mpp_config[] __initdata = {
  75         MPP13_UART1_TXD,
  76         MPP14_UART1_RXD,
  77         0
  78 };
  79
  80 static struct i2c_board_info i2c_board_info[] __initdata = {
  81         {
  82                 I2C_BOARD_INFO("cs42l51", 0x4a),
  83         },
  84 };
  85
  86 static struct platform_device openrd_client_audio_device = {
  87         .name           = "openrd-client-audio",
  88         .id             = -1,
  89 };
  90
  91 static int __initdata uart1;
  92
  93 static int __init sd_uart_selection(char *str)
  94 {
  95         uart1 = -EINVAL;
  96
  97         /* Default is SD. Change if required, for UART */
  98         if (!str)
  99                 return 0;
 100
 101         if (!strncmp(str, "232", 3)) {
 102                 uart1 = 232;
 103         } else if (!strncmp(str, "485", 3)) {
 104                 /* OpenRD-Base doesn't have RS485. Treat is as an
 105                  * unknown argument & just have default setting -
 106                  * which is SD */
 107                 if (machine_is_openrd_base()) {
 108                         uart1 = -ENODEV;
 109                         return 1;
 110                 }
 111
 112                 uart1 = 485;
 113         }
 114         return 1;
 115 }
 116 /* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
 117 __setup("kw_openrd_init_uart1=", sd_uart_selection);
 118
 119 static int __init uart1_mpp_config(void)
 120 {
 121         kirkwood_mpp_conf(openrd_uart1_mpp_config);
 122
 123         if (gpio_request(34, "SD_UART1_SEL")) {
 124                 printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
 125                                 ", gpio: 34\n");
 126                 return -EIO;
 127         }
 128
 129         if (gpio_request(28, "RS232_RS485_SEL")) {
 130                 printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
 131                                 ", gpio# 28\n");
 132                 gpio_free(34);
 133                 return -EIO;
 134         }
 135
 136         /* Select UART1
 137          * Pin # 34: 0 => UART1, 1 => SD */
 138         gpio_direction_output(34, 0);
 139
 140         /* Select RS232 OR RS485
 141          * Pin # 28: 0 => RS232, 1 => RS485 */
 142         if (uart1 == 232)
 143                 gpio_direction_output(28, 0);
 144         else
 145                 gpio_direction_output(28, 1);
 146
 147         gpio_free(34);
 148         gpio_free(28);
 149
 150         return 0;
 151 }
 152
 153 static void __init openrd_init(void)
 154 {
 155         /*
 156          * Basic setup. Needs to be called early.
 157          */
 158         kirkwood_init();
 159         kirkwood_mpp_conf(openrd_mpp_config);
 160
 161         kirkwood_uart0_init();
 162         kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
 163
 164         kirkwood_ehci_init();
 165
 166         if (machine_is_openrd_ultimate()) {
 167                 openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
 168                 openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
 169         }
 170
 171         kirkwood_ge00_init(&openrd_ge00_data);
 172         if (!machine_is_openrd_base())
 173                 kirkwood_ge01_init(&openrd_ge01_data);
 174
 175         kirkwood_sata_init(&openrd_sata_data);
 176
 177         kirkwood_i2c_init();
 178
 179         if (machine_is_openrd_client() || machine_is_openrd_ultimate()) {
 180                 platform_device_register(&openrd_client_audio_device);
 181                 i2c_register_board_info(0, i2c_board_info,
 182                         ARRAY_SIZE(i2c_board_info));
 183                 kirkwood_audio_init();
 184         }
 185
 186         if (uart1 <= 0) {
 187                 if (uart1 < 0)
 188                         printk(KERN_ERR "Invalid kernel parameter to select "
 189                                 "UART1. Defaulting to SD. ERROR CODE: %d\n",
 190                                 uart1);
 191
 192                 /* Select SD
 193                  * Pin # 34: 0 => UART1, 1 => SD */
 194                 if (gpio_request(34, "SD_UART1_SEL")) {
 195                         printk(KERN_ERR "GPIO request failed for SD/UART1 "
 196                                         "selection, gpio: 34\n");
 197                 } else {
 198
 199                         gpio_direction_output(34, 1);
 200                         gpio_free(34);
 201                         kirkwood_sdio_init(&openrd_mvsdio_data);
 202                 }
 203         } else {
 204                 if (!uart1_mpp_config())
 205                         kirkwood_uart1_init();
 206         }
 207 }
 208
 209 static int __init openrd_pci_init(void)
 210 {
 211         if (machine_is_openrd_base() ||
 212             machine_is_openrd_client() ||
 213             machine_is_openrd_ultimate())
 214                 kirkwood_pcie_init(KW_PCIE0);
 215
 216         return 0;
 217 }
 218 subsys_initcall(openrd_pci_init);
 219
 220 #ifdef CONFIG_MACH_OPENRD_BASE
 221 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
 222         /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
 223         .atag_offset    = 0x100,
 224         .init_machine   = openrd_init,
 225         .map_io         = kirkwood_map_io,
 226         .init_early     = kirkwood_init_early,
 227         .init_irq       = kirkwood_init_irq,
 228         .timer          = &kirkwood_timer,
 229         .restart        = kirkwood_restart,
 230 MACHINE_END
 231 #endif
 232
 233 #ifdef CONFIG_MACH_OPENRD_CLIENT
 234 MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
 235         /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
 236         .atag_offset    = 0x100,
 237         .init_machine   = openrd_init,
 238         .map_io         = kirkwood_map_io,
 239         .init_early     = kirkwood_init_early,
 240         .init_irq       = kirkwood_init_irq,
 241         .timer          = &kirkwood_timer,
 242         .restart        = kirkwood_restart,
 243 MACHINE_END
 244 #endif
 245
 246 #ifdef CONFIG_MACH_OPENRD_ULTIMATE
 247 MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
 248         /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
 249         .atag_offset    = 0x100,
 250         .init_machine   = openrd_init,
 251         .map_io         = kirkwood_map_io,
 252         .init_early     = kirkwood_init_early,
 253         .init_irq       = kirkwood_init_irq,
 254         .timer          = &kirkwood_timer,
 255         .restart        = kirkwood_restart,
 256 MACHINE_END
 257 #endif