Pileus Git - ~andy/linux/blob - arch/arm/mach-ixp2000/ixdp2800.c

   1 /*
   2  * arch/arm/mach-ixp2000/ixdp2800.c
   3  *
   4  * IXDP2800 platform support
   5  *
   6  * Original Author: Jeffrey Daly <jeffrey.daly@intel.com>
   7  * Maintainer: Deepak Saxena <dsaxena@plexity.net>
   8  *
   9  * Copyright (C) 2002 Intel Corp.
  10  * Copyright (C) 2003-2004 MontaVista Software, Inc.
  11  *
  12  *  This program is free software; you can redistribute  it and/or modify it
  13  *  under  the terms of  the GNU General  Public License as published by the
  14  *  Free Software Foundation;  either version 2 of the  License, or (at your
  15  *  option) any later version.
  16  */
  17 #include <linux/kernel.h>
  18 #include <linux/init.h>
  19 #include <linux/mm.h>
  20 #include <linux/sched.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/device.h>
  23 #include <linux/bitops.h>
  24 #include <linux/pci.h>
  25 #include <linux/ioport.h>
  26 #include <linux/delay.h>
  27 #include <linux/io.h>
  28
  29 #include <asm/irq.h>
  30 #include <asm/pgtable.h>
  31 #include <asm/page.h>
  32 #include <mach/hardware.h>
  33 #include <asm/mach-types.h>
  34
  35 #include <asm/mach/pci.h>
  36 #include <asm/mach/map.h>
  37 #include <asm/mach/irq.h>
  38 #include <asm/mach/time.h>
  39 #include <asm/mach/flash.h>
  40 #include <asm/mach/arch.h>
  41
  42 /*************************************************************************
  43  * IXDP2800 timer tick
  44  *************************************************************************/
  45
  46 static void __init ixdp2800_timer_init(void)
  47 {
  48         ixp2000_init_time(50000000);
  49 }
  50
  51 static struct sys_timer ixdp2800_timer = {
  52         .init           = ixdp2800_timer_init,
  53         .offset         = ixp2000_gettimeoffset,
  54 };
  55
  56 /*************************************************************************
  57  * IXDP2800 PCI
  58  *************************************************************************/
  59 static void __init ixdp2800_slave_disable_pci_master(void)
  60 {
  61         *IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
  62 }
  63
  64 static void __init ixdp2800_master_wait_for_slave(void)
  65 {
  66         volatile u32 *addr;
  67
  68         printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
  69                          "its BAR sizes\n");
  70
  71         addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
  72                                         PCI_BASE_ADDRESS_1);
  73         do {
  74                 *addr = 0xffffffff;
  75                 cpu_relax();
  76         } while (*addr != 0xfe000008);
  77
  78         addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
  79                                         PCI_BASE_ADDRESS_2);
  80         do {
  81                 *addr = 0xffffffff;
  82                 cpu_relax();
  83         } while (*addr != 0xc0000008);
  84
  85         /*
  86          * Configure the slave's SDRAM BAR by hand.
  87          */
  88         *addr = 0x40000008;
  89 }
  90
  91 static void __init ixdp2800_slave_wait_for_master_enable(void)
  92 {
  93         printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");
  94
  95         while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
  96                 cpu_relax();
  97 }
  98
  99 void __init ixdp2800_pci_preinit(void)
 100 {
 101         printk("ixdp2x00_pci_preinit called\n");
 102
 103         *IXP2000_PCI_ADDR_EXT = 0x0001e000;
 104
 105         if (!ixdp2x00_master_npu())
 106                 ixdp2800_slave_disable_pci_master();
 107
 108         *IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
 109         *IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
 110
 111         ixp2000_pci_preinit();
 112
 113         if (ixdp2x00_master_npu()) {
 114                 /*
 115                  * Wait until the slave set its SRAM/SDRAM BAR sizes
 116                  * correctly before we proceed to scan and enumerate
 117                  * the bus.
 118                  */
 119                 ixdp2800_master_wait_for_slave();
 120
 121                 /*
 122                  * We configure the SDRAM BARs by hand because they
 123                  * are 1G and fall outside of the regular allocated
 124                  * PCI address space.
 125                  */
 126                 *IXP2000_PCI_SDRAM_BAR = 0x00000008;
 127         } else {
 128                 /*
 129                  * Wait for the master to complete scanning the bus
 130                  * and assigning resources before we proceed to scan
 131                  * the bus ourselves.  Set pci=firmware to honor the
 132                  * master's resource assignment.
 133                  */
 134                 ixdp2800_slave_wait_for_master_enable();
 135                 pcibios_setup("firmware");
 136         }
 137 }
 138
 139 /*
 140  * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
 141  * of the regular PCI window, because there's only 512M of outbound PCI
 142  * memory window on each IXP, while we need 1G for each of the BARs.
 143  */
 144 static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
 145 {
 146         if (machine_is_ixdp2800()) {
 147                 dev->resource[2].start = 0;
 148                 dev->resource[2].end   = 0;
 149                 dev->resource[2].flags = 0;
 150         }
 151 }
 152 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);
 153
 154 static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
 155 {
 156         sys->mem_offset = 0x00000000;
 157
 158         ixp2000_pci_setup(nr, sys);
 159
 160         return 1;
 161 }
 162
 163 static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot,
 164         u8 pin)
 165 {
 166         if (ixdp2x00_master_npu()) {
 167
 168                 /*
 169                  * Root bus devices.  Slave NPU is only one with interrupt.
 170                  * Everything else, we just return -1 which is invalid.
 171                  */
 172                 if(!dev->bus->self) {
 173                         if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
 174                                 return IRQ_IXDP2800_INGRESS_NPU;
 175
 176                         return -1;
 177                 }
 178
 179                 /*
 180                  * Bridge behind the PMC slot.
 181                  */
 182                 if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
 183                         dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
 184                         !dev->bus->parent->self->bus->parent)
 185                                   return IRQ_IXDP2800_PMC;
 186
 187                 /*
 188                  * Device behind the first bridge
 189                  */
 190                 if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
 191                         switch(dev->devfn) {
 192                                 case IXDP2X00_PMC_DEVFN:
 193                                         return IRQ_IXDP2800_PMC;
 194
 195                                 case IXDP2800_MASTER_ENET_DEVFN:
 196                                         return IRQ_IXDP2800_EGRESS_ENET;
 197
 198                                 case IXDP2800_SWITCH_FABRIC_DEVFN:
 199                                         return IRQ_IXDP2800_FABRIC;
 200                         }
 201                 }
 202
 203                 return -1;
 204         } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
 205 }
 206
 207 static void __init ixdp2800_master_enable_slave(void)
 208 {
 209         volatile u32 *addr;
 210
 211         printk(KERN_INFO "IXDP2800: enabling slave NPU\n");
 212
 213         addr = (volatile u32 *)ixp2000_pci_config_addr(0,
 214                                         IXDP2X00_SLAVE_NPU_DEVFN,
 215                                         PCI_COMMAND);
 216
 217         *addr |= PCI_COMMAND_MASTER;
 218 }
 219
 220 static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
 221 {
 222         volatile u32 *addr;
 223
 224         printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");
 225
 226         addr = (volatile u32 *)ixp2000_pci_config_addr(0,
 227                                         IXDP2X00_SLAVE_NPU_DEVFN,
 228                                         PCI_COMMAND);
 229         while ((*addr & PCI_COMMAND_MEMORY) == 0)
 230                 cpu_relax();
 231 }
 232
 233 static void __init ixdp2800_slave_signal_bus_scan_completion(void)
 234 {
 235         printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
 236         *IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY;
 237 }
 238
 239 static void __init ixdp2800_pci_postinit(void)
 240 {
 241         if (!ixdp2x00_master_npu()) {
 242                 ixdp2x00_slave_pci_postinit();
 243                 ixdp2800_slave_signal_bus_scan_completion();
 244         }
 245 }
 246
 247 struct __initdata hw_pci ixdp2800_pci __initdata = {
 248         .nr_controllers = 1,
 249         .setup          = ixdp2800_pci_setup,
 250         .preinit        = ixdp2800_pci_preinit,
 251         .postinit       = ixdp2800_pci_postinit,
 252         .scan           = ixp2000_pci_scan_bus,
 253         .map_irq        = ixdp2800_pci_map_irq,
 254 };
 255
 256 int __init ixdp2800_pci_init(void)
 257 {
 258         if (machine_is_ixdp2800()) {
 259                 struct pci_dev *dev;
 260
 261                 pci_common_init(&ixdp2800_pci);
 262                 if (ixdp2x00_master_npu()) {
 263                         dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
 264                         pci_stop_and_remove_bus_device(dev);
 265                         pci_dev_put(dev);
 266
 267                         ixdp2800_master_enable_slave();
 268                         ixdp2800_master_wait_for_slave_bus_scan();
 269                 } else {
 270                         dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
 271                         pci_stop_and_remove_bus_device(dev);
 272                         pci_dev_put(dev);
 273                 }
 274         }
 275
 276         return 0;
 277 }
 278
 279 subsys_initcall(ixdp2800_pci_init);
 280
 281 void __init ixdp2800_init_irq(void)
 282 {
 283         ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
 284 }
 285
 286 MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
 287         /* Maintainer: MontaVista Software, Inc. */
 288         .atag_offset    = 0x100,
 289         .map_io         = ixdp2x00_map_io,
 290         .init_irq       = ixdp2800_init_irq,
 291         .timer          = &ixdp2800_timer,
 292         .init_machine   = ixdp2x00_init_machine,
 293         .restart        = ixp2000_restart,
 294 MACHINE_END
 295