2 bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
3 select ARCH_REQUIRE_GPIOLIB
4 select ARM_PATCH_PHYS_VIRT
5 select AUTO_ZRELADDR if !ZBOOT_ROM
8 select GENERIC_ALLOCATOR
9 select GENERIC_CLOCKEVENTS
10 select GENERIC_IRQ_CHIP
11 select MULTI_IRQ_HANDLER
15 Support for Freescale MXC/iMX-based family of processors
17 menu "Freescale i.MX support"
21 bool "Use IRQ priority"
23 Select this if you want to use prioritized IRQ handling.
24 This feature prevents higher priority ISR to be interrupted
25 by lower priority IRQ even IRQF_DISABLED flag is not set.
26 This may be useful in embedded applications, where are strong
27 requirements for timing.
28 Say N here, unless you have a specialized requirement.
36 config MXC_DEBUG_BOARD
37 bool "Enable MXC debug board(for 3-stack)"
39 The debug board is an integral part of the MXC 3-stack(PDK)
40 platforms, it can be attached or removed from the peripheral
41 board. On debug board, several debug devices(ethernet, UART,
42 buttons, LEDs and JTAG) are implemented. Between the MCU and
43 these devices, a CPLD is added as a bridge which performs
44 data/address de-multiplexing and decode, signal level shift,
45 interrupt control and various board functions.
51 bool "Use EPIT instead of GPT"
54 Use EPIT as the system timer on systems that have it. Normally you
55 don't have a reason to do so as the EPIT has the same features and
56 uses the same clocks as the GPT. Anyway, on some systems the GPT
57 may be in use for other purposes.
62 config HAVE_IMX_ANATOP
73 select ARCH_HAS_RESET_CONTROLLER
75 config IMX_HAVE_IOMUX_V1
78 config ARCH_MXC_IOMUX_V3
95 select IMX_HAVE_IOMUX_V1
102 select IMX_HAVE_IOMUX_V1
108 select ARCH_MXC_IOMUX_V3
111 select HAVE_CAN_FLEXCAN if CAN
116 select ARCH_HAS_CPUFREQ
120 select IMX_HAVE_IOMUX_V1
128 select IMX_HAVE_PLATFORM_MXC_RNGA
130 select SMP_ON_UP if SMP
134 select ARCH_MXC_IOMUX_V3
137 select HAVE_CAN_FLEXCAN if CAN
140 select SMP_ON_UP if SMP
144 select ARCH_HAS_CPUFREQ
146 select ARCH_MXC_IOMUX_V3
160 comment "MX1 platforms:"
165 bool "MX1ADS platform"
166 select IMX_HAVE_PLATFORM_IMX_I2C
167 select IMX_HAVE_PLATFORM_IMX_UART
171 Say Y here if you are using Motorola MX1ADS/MXLADS boards
174 bool "Synertronixx scb9328"
175 select IMX_HAVE_PLATFORM_IMX_UART
177 Say Y here if you are using a Synertronixx scb9328 board
181 select IMX_HAVE_PLATFORM_IMX_I2C
182 select IMX_HAVE_PLATFORM_IMX_UART
185 Say Yes here if you are using the Armadeus APF9328 development board
191 comment "MX21 platforms:"
194 bool "MX21ADS platform"
195 select IMX_HAVE_PLATFORM_IMX_FB
196 select IMX_HAVE_PLATFORM_IMX_UART
197 select IMX_HAVE_PLATFORM_MXC_MMC
198 select IMX_HAVE_PLATFORM_MXC_NAND
201 Include support for MX21ADS platform. This includes specific
202 configurations for the board and its peripherals.
204 comment "MX25 platforms:"
207 bool "Support MX25PDK (3DS) Platform"
208 select IMX_HAVE_PLATFORM_FLEXCAN
209 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
210 select IMX_HAVE_PLATFORM_IMX2_WDT
211 select IMX_HAVE_PLATFORM_IMXDI_RTC
212 select IMX_HAVE_PLATFORM_IMX_FB
213 select IMX_HAVE_PLATFORM_IMX_I2C
214 select IMX_HAVE_PLATFORM_IMX_KEYPAD
215 select IMX_HAVE_PLATFORM_IMX_UART
216 select IMX_HAVE_PLATFORM_MXC_EHCI
217 select IMX_HAVE_PLATFORM_MXC_NAND
218 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
221 config MACH_EUKREA_CPUIMX25SD
222 bool "Support Eukrea CPUIMX25 Platform"
223 select IMX_HAVE_PLATFORM_FLEXCAN
224 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
225 select IMX_HAVE_PLATFORM_IMX2_WDT
226 select IMX_HAVE_PLATFORM_IMXDI_RTC
227 select IMX_HAVE_PLATFORM_IMX_FB
228 select IMX_HAVE_PLATFORM_IMX_I2C
229 select IMX_HAVE_PLATFORM_IMX_UART
230 select IMX_HAVE_PLATFORM_MXC_EHCI
231 select IMX_HAVE_PLATFORM_MXC_NAND
232 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
233 select USB_ULPI_VIEWPORT if USB_ULPI
238 depends on MACH_EUKREA_CPUIMX25SD
239 default MACH_EUKREA_MBIMXSD25_BASEBOARD
241 config MACH_EUKREA_MBIMXSD25_BASEBOARD
242 bool "Eukrea MBIMXSD development board"
243 select IMX_HAVE_PLATFORM_GPIO_KEYS
244 select IMX_HAVE_PLATFORM_IMX_SSI
245 select IMX_HAVE_PLATFORM_SPI_IMX
246 select LEDS_GPIO_REGISTER
248 This adds board specific devices that can be found on Eukrea's
249 MBIMXSD evaluation board.
254 bool "Support i.MX25 platforms from device tree"
257 Include support for Freescale i.MX25 based platforms
258 using the device tree for discovery
260 comment "MX27 platforms:"
263 bool "MX27ADS platform"
264 select IMX_HAVE_PLATFORM_IMX_FB
265 select IMX_HAVE_PLATFORM_IMX_I2C
266 select IMX_HAVE_PLATFORM_IMX_UART
267 select IMX_HAVE_PLATFORM_MXC_MMC
268 select IMX_HAVE_PLATFORM_MXC_NAND
269 select IMX_HAVE_PLATFORM_MXC_W1
272 Include support for MX27ADS platform. This includes specific
273 configurations for the board and its peripherals.
276 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
277 select IMX_HAVE_PLATFORM_IMX2_WDT
278 select IMX_HAVE_PLATFORM_IMX_I2C
279 select IMX_HAVE_PLATFORM_IMX_UART
280 select IMX_HAVE_PLATFORM_MXC_EHCI
281 select IMX_HAVE_PLATFORM_MXC_NAND
282 select IMX_HAVE_PLATFORM_MXC_W1
283 select IMX_HAVE_PLATFORM_SPI_IMX
284 select USB_ULPI_VIEWPORT if USB_ULPI
287 Include support for phyCORE-i.MX27 (aka pcm038) platform. This
288 includes specific configurations for the module and its peripherals.
292 depends on MACH_PCM038
293 default MACH_PCM970_BASEBOARD
295 config MACH_PCM970_BASEBOARD
296 bool "PHYTEC PCM970 development board"
297 select IMX_HAVE_PLATFORM_IMX_FB
298 select IMX_HAVE_PLATFORM_MXC_MMC
300 This adds board specific devices that can be found on Phytec's
301 PCM970 evaluation board.
306 bool "Eukrea CPUIMX27 module"
307 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
308 select IMX_HAVE_PLATFORM_IMX2_WDT
309 select IMX_HAVE_PLATFORM_IMX_I2C
310 select IMX_HAVE_PLATFORM_IMX_UART
311 select IMX_HAVE_PLATFORM_MXC_EHCI
312 select IMX_HAVE_PLATFORM_MXC_NAND
313 select IMX_HAVE_PLATFORM_MXC_W1
314 select USB_ULPI_VIEWPORT if USB_ULPI
317 Include support for Eukrea CPUIMX27 platform. This includes
318 specific configurations for the module and its peripherals.
320 config MACH_EUKREA_CPUIMX27_USESDHC2
321 bool "CPUIMX27 integrates SDHC2 module"
322 depends on MACH_CPUIMX27
323 select IMX_HAVE_PLATFORM_MXC_MMC
325 This adds support for the internal SDHC2 used on CPUIMX27
328 config MACH_EUKREA_CPUIMX27_USEUART4
329 bool "CPUIMX27 integrates UART4 module"
330 depends on MACH_CPUIMX27
332 This adds support for the internal UART4 used on CPUIMX27
337 depends on MACH_CPUIMX27
338 default MACH_EUKREA_MBIMX27_BASEBOARD
340 config MACH_EUKREA_MBIMX27_BASEBOARD
341 bool "Eukrea MBIMX27 development board"
342 select IMX_HAVE_PLATFORM_IMX_FB
343 select IMX_HAVE_PLATFORM_IMX_KEYPAD
344 select IMX_HAVE_PLATFORM_IMX_SSI
345 select IMX_HAVE_PLATFORM_IMX_UART
346 select IMX_HAVE_PLATFORM_MXC_MMC
347 select IMX_HAVE_PLATFORM_SPI_IMX
348 select LEDS_GPIO_REGISTER
350 This adds board specific devices that can be found on Eukrea's
351 MBIMX27 evaluation board.
356 bool "MX27PDK platform"
357 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
358 select IMX_HAVE_PLATFORM_IMX2_WDT
359 select IMX_HAVE_PLATFORM_IMX_FB
360 select IMX_HAVE_PLATFORM_IMX_I2C
361 select IMX_HAVE_PLATFORM_IMX_KEYPAD
362 select IMX_HAVE_PLATFORM_IMX_SSI
363 select IMX_HAVE_PLATFORM_IMX_UART
364 select IMX_HAVE_PLATFORM_MX2_CAMERA
365 select IMX_HAVE_PLATFORM_MXC_EHCI
366 select IMX_HAVE_PLATFORM_MXC_MMC
367 select IMX_HAVE_PLATFORM_SPI_IMX
368 select MXC_DEBUG_BOARD
369 select USB_ULPI_VIEWPORT if USB_ULPI
372 Include support for MX27PDK platform. This includes specific
373 configurations for the board and its peripherals.
375 config MACH_IMX27_VISSTRIM_M10
376 bool "Vista Silicon i.MX27 Visstrim_m10"
377 select IMX_HAVE_PLATFORM_GPIO_KEYS
378 select IMX_HAVE_PLATFORM_IMX_I2C
379 select IMX_HAVE_PLATFORM_IMX_SSI
380 select IMX_HAVE_PLATFORM_IMX_UART
381 select IMX_HAVE_PLATFORM_MX2_CAMERA
382 select IMX_HAVE_PLATFORM_MX2_EMMA
383 select IMX_HAVE_PLATFORM_MXC_EHCI
384 select IMX_HAVE_PLATFORM_MXC_MMC
385 select LEDS_GPIO_REGISTER
388 Include support for Visstrim_m10 platform and its different variants.
389 This includes specific configurations for the board and its
392 config MACH_IMX27LITE
393 bool "LogicPD MX27 LITEKIT platform"
394 select IMX_HAVE_PLATFORM_IMX_SSI
395 select IMX_HAVE_PLATFORM_IMX_UART
398 Include support for MX27 LITEKIT platform. This includes specific
399 configurations for the board and its peripherals.
402 bool "Phytec phyCARD-s (pca100)"
403 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
404 select IMX_HAVE_PLATFORM_IMX2_WDT
405 select IMX_HAVE_PLATFORM_IMX_FB
406 select IMX_HAVE_PLATFORM_IMX_I2C
407 select IMX_HAVE_PLATFORM_IMX_SSI
408 select IMX_HAVE_PLATFORM_IMX_UART
409 select IMX_HAVE_PLATFORM_MXC_EHCI
410 select IMX_HAVE_PLATFORM_MXC_MMC
411 select IMX_HAVE_PLATFORM_MXC_NAND
412 select IMX_HAVE_PLATFORM_MXC_W1
413 select IMX_HAVE_PLATFORM_SPI_IMX
414 select USB_ULPI_VIEWPORT if USB_ULPI
417 Include support for phyCARD-s (aka pca100) platform. This
418 includes specific configurations for the module and its peripherals.
421 bool "Maxtrack i-MXT TD60"
422 select IMX_HAVE_PLATFORM_IMX_FB
423 select IMX_HAVE_PLATFORM_IMX_I2C
424 select IMX_HAVE_PLATFORM_IMX_UART
425 select IMX_HAVE_PLATFORM_MXC_MMC
426 select IMX_HAVE_PLATFORM_MXC_NAND
429 Include support for i-MXT (aka td60) platform. This
430 includes specific configurations for the module and its peripherals.
432 config MACH_IMX27IPCAM
433 bool "IMX27 IPCAM platform"
434 select IMX_HAVE_PLATFORM_IMX2_WDT
435 select IMX_HAVE_PLATFORM_IMX_UART
438 Include support for IMX27 IPCAM platform. This includes specific
439 configurations for the board and its peripherals.
442 bool "Support i.MX27 platforms from device tree"
445 Include support for Freescale i.MX27 based platforms
446 using the device tree for discovery
452 comment "MX31 platforms:"
455 bool "Support MX31ADS platforms"
457 select IMX_HAVE_PLATFORM_IMX_I2C
458 select IMX_HAVE_PLATFORM_IMX_SSI
459 select IMX_HAVE_PLATFORM_IMX_UART
462 Include support for MX31ADS platform. This includes specific
463 configurations for the board and its peripherals.
465 config MACH_MX31ADS_WM1133_EV1
466 bool "Support Wolfson Microelectronics 1133-EV1 module"
467 depends on MACH_MX31ADS
468 depends on MFD_WM8350_I2C
469 depends on REGULATOR_WM8350 = y
471 Include support for the Wolfson Microelectronics 1133-EV1 PMU
472 and audio module for the MX31ADS platform.
474 config MACH_MX31LILLY
475 bool "Support MX31 LILLY-1131 platforms (INCO startec)"
476 select IMX_HAVE_PLATFORM_IMX_UART
477 select IMX_HAVE_PLATFORM_IPU_CORE
478 select IMX_HAVE_PLATFORM_MXC_EHCI
479 select IMX_HAVE_PLATFORM_MXC_MMC
480 select IMX_HAVE_PLATFORM_SPI_IMX
481 select USB_ULPI_VIEWPORT if USB_ULPI
484 Include support for mx31 based LILLY1131 modules. This includes
485 specific configurations for the board and its peripherals.
488 bool "Support MX31 LITEKIT (LogicPD)"
489 select IMX_HAVE_PLATFORM_IMX2_WDT
490 select IMX_HAVE_PLATFORM_IMX_UART
491 select IMX_HAVE_PLATFORM_MXC_EHCI
492 select IMX_HAVE_PLATFORM_MXC_MMC
493 select IMX_HAVE_PLATFORM_MXC_NAND
494 select IMX_HAVE_PLATFORM_MXC_RTC
495 select IMX_HAVE_PLATFORM_SPI_IMX
496 select LEDS_GPIO_REGISTER
497 select USB_ULPI_VIEWPORT if USB_ULPI
500 Include support for MX31 LITEKIT platform. This includes specific
501 configurations for the board and its peripherals.
504 bool "Support Phytec pcm037 (i.MX31) platforms"
505 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
506 select IMX_HAVE_PLATFORM_IMX2_WDT
507 select IMX_HAVE_PLATFORM_IMX_I2C
508 select IMX_HAVE_PLATFORM_IMX_UART
509 select IMX_HAVE_PLATFORM_IPU_CORE
510 select IMX_HAVE_PLATFORM_MXC_EHCI
511 select IMX_HAVE_PLATFORM_MXC_MMC
512 select IMX_HAVE_PLATFORM_MXC_NAND
513 select IMX_HAVE_PLATFORM_MXC_W1
514 select USB_ULPI_VIEWPORT if USB_ULPI
517 Include support for Phytec pcm037 platform. This includes
518 specific configurations for the board and its peripherals.
520 config MACH_PCM037_EET
521 bool "Support pcm037 EET board extensions"
522 depends on MACH_PCM037
523 select IMX_HAVE_PLATFORM_GPIO_KEYS
524 select IMX_HAVE_PLATFORM_SPI_IMX
526 Add support for PCM037 EET baseboard extensions. If you are using the
527 OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
528 command-line parameter.
531 bool "Support MX31PDK (3DS)"
532 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
533 select IMX_HAVE_PLATFORM_IMX2_WDT
534 select IMX_HAVE_PLATFORM_IMX_I2C
535 select IMX_HAVE_PLATFORM_IMX_KEYPAD
536 select IMX_HAVE_PLATFORM_IMX_SSI
537 select IMX_HAVE_PLATFORM_IMX_UART
538 select IMX_HAVE_PLATFORM_IPU_CORE
539 select IMX_HAVE_PLATFORM_MXC_EHCI
540 select IMX_HAVE_PLATFORM_MXC_MMC
541 select IMX_HAVE_PLATFORM_MXC_NAND
542 select IMX_HAVE_PLATFORM_SPI_IMX
543 select MXC_DEBUG_BOARD
544 select USB_ULPI_VIEWPORT if USB_ULPI
547 Include support for MX31PDK (3DS) platform. This includes specific
548 configurations for the board and its peripherals.
550 config MACH_MX31_3DS_MXC_NAND_USE_BBT
551 bool "Make the MXC NAND driver use the in flash Bad Block Table"
552 depends on MACH_MX31_3DS
553 depends on MTD_NAND_MXC
555 Enable this if you want that the MXC NAND driver uses the in flash
556 Bad Block Table to know what blocks are bad instead of scanning the
557 entire flash looking for bad block markers.
559 config MACH_MX31MOBOARD
560 bool "Support mx31moboard platforms (EPFL Mobots group)"
561 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
562 select IMX_HAVE_PLATFORM_IMX2_WDT
563 select IMX_HAVE_PLATFORM_IMX_I2C
564 select IMX_HAVE_PLATFORM_IMX_SSI
565 select IMX_HAVE_PLATFORM_IMX_UART
566 select IMX_HAVE_PLATFORM_IPU_CORE
567 select IMX_HAVE_PLATFORM_MXC_EHCI
568 select IMX_HAVE_PLATFORM_MXC_MMC
569 select IMX_HAVE_PLATFORM_SPI_IMX
570 select LEDS_GPIO_REGISTER
571 select USB_ULPI_VIEWPORT if USB_ULPI
574 Include support for mx31moboard platform. This includes specific
575 configurations for the board and its peripherals.
578 bool "Support Dave/DENX QongEVB-LITE platform"
579 select IMX_HAVE_PLATFORM_IMX2_WDT
580 select IMX_HAVE_PLATFORM_IMX_UART
583 Include support for Dave/DENX QongEVB-LITE platform. This includes
584 specific configurations for the board and its peripherals.
586 config MACH_ARMADILLO5X0
587 bool "Support Atmark Armadillo-500 Development Base Board"
588 select IMX_HAVE_PLATFORM_GPIO_KEYS
589 select IMX_HAVE_PLATFORM_IMX_I2C
590 select IMX_HAVE_PLATFORM_IMX_UART
591 select IMX_HAVE_PLATFORM_IPU_CORE
592 select IMX_HAVE_PLATFORM_MXC_EHCI
593 select IMX_HAVE_PLATFORM_MXC_MMC
594 select IMX_HAVE_PLATFORM_MXC_NAND
595 select USB_ULPI_VIEWPORT if USB_ULPI
598 Include support for Atmark Armadillo-500 platform. This includes
599 specific configurations for the board and its peripherals.
601 config MACH_KZM_ARM11_01
602 bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
603 select IMX_HAVE_PLATFORM_IMX_UART
606 Include support for KZM-ARM11-01. This includes specific
607 configurations for the board and its peripherals.
610 bool "Support Buglabs BUGBase platform"
612 select IMX_HAVE_PLATFORM_IMX_UART
615 Include support for BUGBase 1.3 platform. This includes specific
616 configurations for the board and its peripherals.
619 bool "Support i.MX31 platforms from device tree"
622 Include support for Freescale i.MX31 based platforms
623 using the device tree for discovery.
625 comment "MX35 platforms:"
628 bool "Support Phytec pcm043 (i.MX35) platforms"
629 select IMX_HAVE_PLATFORM_FLEXCAN
630 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
631 select IMX_HAVE_PLATFORM_IMX2_WDT
632 select IMX_HAVE_PLATFORM_IMX_I2C
633 select IMX_HAVE_PLATFORM_IMX_SSI
634 select IMX_HAVE_PLATFORM_IMX_UART
635 select IMX_HAVE_PLATFORM_IPU_CORE
636 select IMX_HAVE_PLATFORM_MXC_EHCI
637 select IMX_HAVE_PLATFORM_MXC_NAND
638 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
639 select USB_ULPI_VIEWPORT if USB_ULPI
642 Include support for Phytec pcm043 platform. This includes
643 specific configurations for the board and its peripherals.
646 bool "Support MX35PDK platform"
647 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
648 select IMX_HAVE_PLATFORM_IMX2_WDT
649 select IMX_HAVE_PLATFORM_IMX_FB
650 select IMX_HAVE_PLATFORM_IMX_I2C
651 select IMX_HAVE_PLATFORM_IMX_UART
652 select IMX_HAVE_PLATFORM_IPU_CORE
653 select IMX_HAVE_PLATFORM_MXC_EHCI
654 select IMX_HAVE_PLATFORM_MXC_NAND
655 select IMX_HAVE_PLATFORM_MXC_RTC
656 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
657 select MXC_DEBUG_BOARD
660 Include support for MX35PDK platform. This includes specific
661 configurations for the board and its peripherals.
663 config MACH_EUKREA_CPUIMX35SD
664 bool "Support Eukrea CPUIMX35 Platform"
665 select IMX_HAVE_PLATFORM_FLEXCAN
666 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
667 select IMX_HAVE_PLATFORM_IMX2_WDT
668 select IMX_HAVE_PLATFORM_IMX_I2C
669 select IMX_HAVE_PLATFORM_IMX_UART
670 select IMX_HAVE_PLATFORM_MXC_EHCI
671 select IMX_HAVE_PLATFORM_MXC_NAND
672 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
673 select USB_ULPI_VIEWPORT if USB_ULPI
676 Include support for Eukrea CPUIMX35 platform. This includes
677 specific configurations for the board and its peripherals.
681 depends on MACH_EUKREA_CPUIMX35SD
682 default MACH_EUKREA_MBIMXSD35_BASEBOARD
684 config MACH_EUKREA_MBIMXSD35_BASEBOARD
685 bool "Eukrea MBIMXSD development board"
686 select IMX_HAVE_PLATFORM_GPIO_KEYS
687 select IMX_HAVE_PLATFORM_IMX_SSI
688 select IMX_HAVE_PLATFORM_IPU_CORE
689 select IMX_HAVE_PLATFORM_SPI_IMX
690 select LEDS_GPIO_REGISTER
692 This adds board specific devices that can be found on Eukrea's
693 MBIMXSD evaluation board.
698 bool "Support VPR200 platform"
699 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
700 select IMX_HAVE_PLATFORM_GPIO_KEYS
701 select IMX_HAVE_PLATFORM_IMX2_WDT
702 select IMX_HAVE_PLATFORM_IMX_I2C
703 select IMX_HAVE_PLATFORM_IMX_UART
704 select IMX_HAVE_PLATFORM_IPU_CORE
705 select IMX_HAVE_PLATFORM_MXC_EHCI
706 select IMX_HAVE_PLATFORM_MXC_NAND
707 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
710 Include support for VPR200 platform. This includes specific
711 configurations for the board and its peripherals.
717 comment "i.MX51 machines:"
720 bool "Support i.MX51 platforms from device tree"
723 Include support for Freescale i.MX51 based platforms
724 using the device tree for discovery
726 config MACH_MX51_BABBAGE
727 bool "Support MX51 BABBAGE platforms"
728 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
729 select IMX_HAVE_PLATFORM_IMX2_WDT
730 select IMX_HAVE_PLATFORM_IMX_I2C
731 select IMX_HAVE_PLATFORM_IMX_UART
732 select IMX_HAVE_PLATFORM_MXC_EHCI
733 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
734 select IMX_HAVE_PLATFORM_SPI_IMX
737 Include support for MX51 Babbage platform, also known as MX51EVK in
738 u-boot. This includes specific configurations for the board and its
741 config MACH_EUKREA_CPUIMX51SD
742 bool "Support Eukrea CPUIMX51SD module"
743 select IMX_HAVE_PLATFORM_FSL_USB2_UDC
744 select IMX_HAVE_PLATFORM_IMX2_WDT
745 select IMX_HAVE_PLATFORM_IMX_I2C
746 select IMX_HAVE_PLATFORM_IMX_UART
747 select IMX_HAVE_PLATFORM_MXC_EHCI
748 select IMX_HAVE_PLATFORM_MXC_NAND
749 select IMX_HAVE_PLATFORM_SPI_IMX
752 Include support for Eukrea CPUIMX51SD platform. This includes
753 specific configurations for the module and its peripherals.
757 depends on MACH_EUKREA_CPUIMX51SD
758 default MACH_EUKREA_MBIMXSD51_BASEBOARD
760 config MACH_EUKREA_MBIMXSD51_BASEBOARD
761 prompt "Eukrea MBIMXSD development board"
763 select IMX_HAVE_PLATFORM_IMX_SSI
764 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
765 select LEDS_GPIO_REGISTER
767 This adds board specific devices that can be found on Eukrea's
768 MBIMXSD evaluation board.
772 comment "Device tree only"
775 bool "i.MX53 support"
776 select HAVE_CAN_FLEXCAN if CAN
778 select IMX_HAVE_PLATFORM_IMX2_WDT
784 This enables support for Freescale i.MX53 processor.
787 bool "i.MX6 Quad/DualLite support"
788 select ARCH_HAS_CPUFREQ
790 select ARM_CPU_SUSPEND if PM
791 select ARM_ERRATA_754322
792 select ARM_ERRATA_764369 if SMP
793 select ARM_ERRATA_775420
797 select HAVE_ARM_SCU if SMP
798 select HAVE_ARM_TWD if LOCAL_TIMERS
799 select HAVE_CAN_FLEXCAN if CAN
800 select HAVE_IMX_ANATOP
808 select PL310_ERRATA_588369 if CACHE_PL310
809 select PL310_ERRATA_727915 if CACHE_PL310
810 select PL310_ERRATA_769419 if CACHE_PL310
814 This enables support for Freescale i.MX6 Quad processor.
817 bool "i.MX6 SoloLite support"
818 select ARM_ERRATA_754322
819 select ARM_ERRATA_775420
822 select HAVE_IMX_ANATOP
827 select PINCTRL_IMX6SL
828 select PL310_ERRATA_588369 if CACHE_PL310
829 select PL310_ERRATA_727915 if CACHE_PL310
830 select PL310_ERRATA_769419 if CACHE_PL310
833 This enables support for Freescale i.MX6 SoloLite processor.
836 bool "Vybrid Family VF610 support"
843 select PL310_ERRATA_588369 if CACHE_PL310
844 select PL310_ERRATA_727915 if CACHE_PL310
845 select PL310_ERRATA_769419 if CACHE_PL310
848 This enable support for Freescale Vybrid VF610 processor.
852 source "arch/arm/mach-imx/devices/Kconfig"