]> Pileus Git - ~andy/linux/blob - arch/arm/boot/dts/sun4i-a10-hackberry.dts
ARM: sun4i: dt: Remove chosen nodes
[~andy/linux] / arch / arm / boot / dts / sun4i-a10-hackberry.dts
1 /*
2  * Copyright 2012 Maxime Ripard
3  *
4  * Maxime Ripard <maxime.ripard@free-electrons.com>
5  *
6  * The code contained herein is licensed under the GNU General Public
7  * License. You may obtain a copy of the GNU General Public License
8  * Version 2 or later at the following locations:
9  *
10  * http://www.opensource.org/licenses/gpl-license.html
11  * http://www.gnu.org/copyleft/gpl.html
12  */
13
14 /dts-v1/;
15 /include/ "sun4i-a10.dtsi"
16
17 / {
18         model = "Miniand Hackberry";
19         compatible = "miniand,hackberry", "allwinner,sun4i-a10";
20
21         soc@01c00000 {
22                 emac: ethernet@01c0b000 {
23                         pinctrl-names = "default";
24                         pinctrl-0 = <&emac_pins_a>;
25                         phy = <&phy0>;
26                         status = "okay";
27                 };
28
29                 mdio@01c0b080 {
30                         phy-supply = <&reg_emac_3v3>;
31                         status = "okay";
32
33                         phy0: ethernet-phy@0 {
34                                 reg = <0>;
35                         };
36                 };
37
38                 pio: pinctrl@01c20800 {
39                         pinctrl-names = "default";
40                         pinctrl-0 = <&hackberry_hogs>;
41
42                         hackberry_hogs: hogs@0 {
43                                 allwinner,pins = "PH19";
44                                 allwinner,function = "gpio_out";
45                                 allwinner,drive = <0>;
46                                 allwinner,pull = <0>;
47                         };
48                 };
49
50                 uart0: serial@01c28000 {
51                         pinctrl-names = "default";
52                         pinctrl-0 = <&uart0_pins_a>;
53                         status = "okay";
54                 };
55         };
56
57         regulators {
58                 compatible = "simple-bus";
59
60                 reg_emac_3v3: emac-3v3 {
61                         compatible = "regulator-fixed";
62                         regulator-name = "emac-3v3";
63                         regulator-min-microvolt = <3300000>;
64                         regulator-max-microvolt = <3300000>;
65                         enable-active-high;
66                         gpio = <&pio 7 19 0>;
67                 };
68         };
69 };