Pileus Git - ~andy/linux/blob - arch/arm/boot/dts/sama5d3.dtsi

   1 /*
   2  * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
   3  *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC
   4  *
   5  *  Copyright (C) 2013 Atmel,
   6  *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
   7  *
   8  * Licensed under GPLv2 or later.
   9  */
  10
  11 /include/ "skeleton.dtsi"
  12
  13 / {
  14         model = "Atmel SAMA5D3 family SoC";
  15         compatible = "atmel,sama5d3", "atmel,sama5";
  16         interrupt-parent = <&aic>;
  17
  18         aliases {
  19                 serial0 = &dbgu;
  20                 serial1 = &usart0;
  21                 serial2 = &usart1;
  22                 serial3 = &usart2;
  23                 serial4 = &usart3;
  24                 gpio0 = &pioA;
  25                 gpio1 = &pioB;
  26                 gpio2 = &pioC;
  27                 gpio3 = &pioD;
  28                 gpio4 = &pioE;
  29                 tcb0 = &tcb0;
  30                 tcb1 = &tcb1;
  31                 i2c0 = &i2c0;
  32                 i2c1 = &i2c1;
  33                 i2c2 = &i2c2;
  34                 ssc0 = &ssc0;
  35                 ssc1 = &ssc1;
  36         };
  37         cpus {
  38                 cpu@0 {
  39                         compatible = "arm,cortex-a5";
  40                 };
  41         };
  42
  43         memory {
  44                 reg = <0x20000000 0x8000000>;
  45         };
  46
  47         ahb {
  48                 compatible = "simple-bus";
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 ranges;
  52
  53                 apb {
  54                         compatible = "simple-bus";
  55                         #address-cells = <1>;
  56                         #size-cells = <1>;
  57                         ranges;
  58
  59                         mmc0: mmc@f0000000 {
  60                                 compatible = "atmel,hsmci";
  61                                 reg = <0xf0000000 0x600>;
  62                                 interrupts = <21 4 0>;
  63                                 dmas = <&dma0 2 0>;
  64                                 dma-names = "rxtx";
  65                                 pinctrl-names = "default";
  66                                 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
  67                                 status = "disabled";
  68                                 #address-cells = <1>;
  69                                 #size-cells = <0>;
  70                         };
  71
  72                         spi0: spi@f0004000 {
  73                                 #address-cells = <1>;
  74                                 #size-cells = <0>;
  75                                 compatible = "atmel,at91sam9x5-spi";
  76                                 reg = <0xf0004000 0x100>;
  77                                 interrupts = <24 4 3>;
  78                                 cs-gpios = <&pioD 13 0
  79                                             &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
  80                                             &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
  81                                             &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
  82                                            >;
  83                                 pinctrl-names = "default";
  84                                 pinctrl-0 = <&pinctrl_spi0>;
  85                                 status = "disabled";
  86                         };
  87
  88                         ssc0: ssc@f0008000 {
  89                                 compatible = "atmel,at91sam9g45-ssc";
  90                                 reg = <0xf0008000 0x4000>;
  91                                 interrupts = <38 4 4>;
  92                                 pinctrl-names = "default";
  93                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
  94                                 status = "disabled";
  95                         };
  96
  97                         can0: can@f000c000 {
  98                                 compatible = "atmel,at91sam9x5-can";
  99                                 reg = <0xf000c000 0x300>;
 100                                 interrupts = <40 4 3>;
 101                                 pinctrl-names = "default";
 102                                 pinctrl-0 = <&pinctrl_can0_rx_tx>;
 103                                 status = "disabled";
 104                         };
 105
 106                         tcb0: timer@f0010000 {
 107                                 compatible = "atmel,at91sam9x5-tcb";
 108                                 reg = <0xf0010000 0x100>;
 109                                 interrupts = <26 4 0>;
 110                         };
 111
 112                         i2c0: i2c@f0014000 {
 113                                 compatible = "atmel,at91sam9x5-i2c";
 114                                 reg = <0xf0014000 0x4000>;
 115                                 interrupts = <18 4 6>;
 116                                 dmas = <&dma0 2 7>,
 117                                        <&dma0 2 8>;
 118                                 dma-names = "tx", "rx";
 119                                 pinctrl-names = "default";
 120                                 pinctrl-0 = <&pinctrl_i2c0>;
 121                                 #address-cells = <1>;
 122                                 #size-cells = <0>;
 123                                 status = "disabled";
 124                         };
 125
 126                         i2c1: i2c@f0018000 {
 127                                 compatible = "atmel,at91sam9x5-i2c";
 128                                 reg = <0xf0018000 0x4000>;
 129                                 interrupts = <19 4 6>;
 130                                 dmas = <&dma0 2 9>,
 131                                        <&dma0 2 10>;
 132                                 dma-names = "tx", "rx";
 133                                 pinctrl-names = "default";
 134                                 pinctrl-0 = <&pinctrl_i2c1>;
 135                                 #address-cells = <1>;
 136                                 #size-cells = <0>;
 137                                 status = "disabled";
 138                         };
 139
 140                         usart0: serial@f001c000 {
 141                                 compatible = "atmel,at91sam9260-usart";
 142                                 reg = <0xf001c000 0x100>;
 143                                 interrupts = <12 4 5>;
 144                                 pinctrl-names = "default";
 145                                 pinctrl-0 = <&pinctrl_usart0>;
 146                                 status = "disabled";
 147                         };
 148
 149                         usart1: serial@f0020000 {
 150                                 compatible = "atmel,at91sam9260-usart";
 151                                 reg = <0xf0020000 0x100>;
 152                                 interrupts = <13 4 5>;
 153                                 pinctrl-names = "default";
 154                                 pinctrl-0 = <&pinctrl_usart1>;
 155                                 status = "disabled";
 156                         };
 157
 158                         macb0: ethernet@f0028000 {
 159                                 compatible = "cnds,pc302-gem", "cdns,gem";
 160                                 reg = <0xf0028000 0x100>;
 161                                 interrupts = <34 4 3>;
 162                                 pinctrl-names = "default";
 163                                 pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
 164                                 status = "disabled";
 165                         };
 166
 167                         isi: isi@f0034000 {
 168                                 compatible = "atmel,at91sam9g45-isi";
 169                                 reg = <0xf0034000 0x4000>;
 170                                 interrupts = <37 4 5>;
 171                                 status = "disabled";
 172                         };
 173
 174                         mmc1: mmc@f8000000 {
 175                                 compatible = "atmel,hsmci";
 176                                 reg = <0xf8000000 0x600>;
 177                                 interrupts = <22 4 0>;
 178                                 dmas = <&dma1 2 0>;
 179                                 dma-names = "rxtx";
 180                                 pinctrl-names = "default";
 181                                 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
 182                                 status = "disabled";
 183                                 #address-cells = <1>;
 184                                 #size-cells = <0>;
 185                         };
 186
 187                         mmc2: mmc@f8004000 {
 188                                 compatible = "atmel,hsmci";
 189                                 reg = <0xf8004000 0x600>;
 190                                 interrupts = <23 4 0>;
 191                                 dmas = <&dma1 2 1>;
 192                                 dma-names = "rxtx";
 193                                 pinctrl-names = "default";
 194                                 pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
 195                                 status = "disabled";
 196                                 #address-cells = <1>;
 197                                 #size-cells = <0>;
 198                         };
 199
 200                         spi1: spi@f8008000 {
 201                                 #address-cells = <1>;
 202                                 #size-cells = <0>;
 203                                 compatible = "atmel,at91sam9x5-spi";
 204                                 reg = <0xf8008000 0x100>;
 205                                 interrupts = <25 4 3>;
 206                                 cs-gpios = <&pioC 25 0
 207                                             &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
 208                                             &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
 209                                             &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
 210                                            >;
 211                                 pinctrl-names = "default";
 212                                 pinctrl-0 = <&pinctrl_spi1>;
 213                                 status = "disabled";
 214                         };
 215
 216                         ssc1: ssc@f800c000 {
 217                                 compatible = "atmel,at91sam9g45-ssc";
 218                                 reg = <0xf800c000 0x4000>;
 219                                 interrupts = <39 4 4>;
 220                                 pinctrl-names = "default";
 221                                 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 222                                 status = "disabled";
 223                         };
 224
 225                         can1: can@f8010000 {
 226                                 compatible = "atmel,at91sam9x5-can";
 227                                 reg = <0xf8010000 0x300>;
 228                                 interrupts = <41 4 3>;
 229                                 pinctrl-names = "default";
 230                                 pinctrl-0 = <&pinctrl_can1_rx_tx>;
 231                         };
 232
 233                         tcb1: timer@f8014000 {
 234                                 compatible = "atmel,at91sam9x5-tcb";
 235                                 reg = <0xf8014000 0x100>;
 236                                 interrupts = <27 4 0>;
 237                         };
 238
 239                         adc0: adc@f8018000 {
 240                                 compatible = "atmel,at91sam9260-adc";
 241                                 reg = <0xf8018000 0x100>;
 242                                 interrupts = <29 4 5>;
 243                                 pinctrl-names = "default";
 244                                 pinctrl-0 = <
 245                                         &pinctrl_adc0_adtrg
 246                                         &pinctrl_adc0_ad0
 247                                         &pinctrl_adc0_ad1
 248                                         &pinctrl_adc0_ad2
 249                                         &pinctrl_adc0_ad3
 250                                         &pinctrl_adc0_ad4
 251                                         &pinctrl_adc0_ad5
 252                                         &pinctrl_adc0_ad6
 253                                         &pinctrl_adc0_ad7
 254                                         &pinctrl_adc0_ad8
 255                                         &pinctrl_adc0_ad9
 256                                         &pinctrl_adc0_ad10
 257                                         &pinctrl_adc0_ad11
 258                                         >;
 259                                 atmel,adc-channel-base = <0x50>;
 260                                 atmel,adc-channels-used = <0xfff>;
 261                                 atmel,adc-drdy-mask = <0x1000000>;
 262                                 atmel,adc-num-channels = <12>;
 263                                 atmel,adc-startup-time = <40>;
 264                                 atmel,adc-status-register = <0x30>;
 265                                 atmel,adc-trigger-register = <0xc0>;
 266                                 atmel,adc-use-external;
 267                                 atmel,adc-vref = <3000>;
 268                                 atmel,adc-res = <10 12>;
 269                                 atmel,adc-res-names = "lowres", "highres";
 270                                 status = "disabled";
 271
 272                                 trigger@0 {
 273                                         trigger-name = "external-rising";
 274                                         trigger-value = <0x1>;
 275                                         trigger-external;
 276                                 };
 277                                 trigger@1 {
 278                                         trigger-name = "external-falling";
 279                                         trigger-value = <0x2>;
 280                                         trigger-external;
 281                                 };
 282                                 trigger@2 {
 283                                         trigger-name = "external-any";
 284                                         trigger-value = <0x3>;
 285                                         trigger-external;
 286                                 };
 287                                 trigger@3 {
 288                                         trigger-name = "continuous";
 289                                         trigger-value = <0x6>;
 290                                 };
 291                         };
 292
 293                         tsadcc: tsadcc@f8018000 {
 294                                 compatible = "atmel,at91sam9x5-tsadcc";
 295                                 reg = <0xf8018000 0x4000>;
 296                                 interrupts = <29 4 5>;
 297                                 atmel,tsadcc_clock = <300000>;
 298                                 atmel,filtering_average = <0x03>;
 299                                 atmel,pendet_debounce = <0x08>;
 300                                 atmel,pendet_sensitivity = <0x02>;
 301                                 atmel,ts_sample_hold_time = <0x0a>;
 302                                 status = "disabled";
 303                         };
 304
 305                         i2c2: i2c@f801c000 {
 306                                 compatible = "atmel,at91sam9x5-i2c";
 307                                 reg = <0xf801c000 0x4000>;
 308                                 interrupts = <20 4 6>;
 309                                 dmas = <&dma1 2 11>,
 310                                        <&dma1 2 12>;
 311                                 dma-names = "tx", "rx";
 312                                 #address-cells = <1>;
 313                                 #size-cells = <0>;
 314                                 status = "disabled";
 315                         };
 316
 317                         usart2: serial@f8020000 {
 318                                 compatible = "atmel,at91sam9260-usart";
 319                                 reg = <0xf8020000 0x100>;
 320                                 interrupts = <14 4 5>;
 321                                 pinctrl-names = "default";
 322                                 pinctrl-0 = <&pinctrl_usart2>;
 323                                 status = "disabled";
 324                         };
 325
 326                         usart3: serial@f8024000 {
 327                                 compatible = "atmel,at91sam9260-usart";
 328                                 reg = <0xf8024000 0x100>;
 329                                 interrupts = <15 4 5>;
 330                                 pinctrl-names = "default";
 331                                 pinctrl-0 = <&pinctrl_usart3>;
 332                                 status = "disabled";
 333                         };
 334
 335                         macb1: ethernet@f802c000 {
 336                                 compatible = "cdns,at32ap7000-macb", "cdns,macb";
 337                                 reg = <0xf802c000 0x100>;
 338                                 interrupts = <35 4 3>;
 339                                 pinctrl-names = "default";
 340                                 pinctrl-0 = <&pinctrl_macb1_rmii>;
 341                                 status = "disabled";
 342                         };
 343
 344                         sha@f8034000 {
 345                                 compatible = "atmel,sam9g46-sha";
 346                                 reg = <0xf8034000 0x100>;
 347                                 interrupts = <42 4 0>;
 348                         };
 349
 350                         aes@f8038000 {
 351                                 compatible = "atmel,sam9g46-aes";
 352                                 reg = <0xf8038000 0x100>;
 353                                 interrupts = <43 4 0>;
 354                         };
 355
 356                         tdes@f803c000 {
 357                                 compatible = "atmel,sam9g46-tdes";
 358                                 reg = <0xf803c000 0x100>;
 359                                 interrupts = <44 4 0>;
 360                         };
 361
 362                         dma0: dma-controller@ffffe600 {
 363                                 compatible = "atmel,at91sam9g45-dma";
 364                                 reg = <0xffffe600 0x200>;
 365                                 interrupts = <30 4 0>;
 366                                 #dma-cells = <2>;
 367                         };
 368
 369                         dma1: dma-controller@ffffe800 {
 370                                 compatible = "atmel,at91sam9g45-dma";
 371                                 reg = <0xffffe800 0x200>;
 372                                 interrupts = <31 4 0>;
 373                                 #dma-cells = <2>;
 374                         };
 375
 376                         ramc0: ramc@ffffea00 {
 377                                 compatible = "atmel,at91sam9g45-ddramc";
 378                                 reg = <0xffffea00 0x200>;
 379                         };
 380
 381                         dbgu: serial@ffffee00 {
 382                                 compatible = "atmel,at91sam9260-usart";
 383                                 reg = <0xffffee00 0x200>;
 384                                 interrupts = <2 4 7>;
 385                                 pinctrl-names = "default";
 386                                 pinctrl-0 = <&pinctrl_dbgu>;
 387                                 status = "disabled";
 388                         };
 389
 390                         aic: interrupt-controller@fffff000 {
 391                                 #interrupt-cells = <3>;
 392                                 compatible = "atmel,sama5d3-aic";
 393                                 interrupt-controller;
 394                                 reg = <0xfffff000 0x200>;
 395                                 atmel,external-irqs = <47>;
 396                         };
 397
 398                         pinctrl@fffff200 {
 399                                 #address-cells = <1>;
 400                                 #size-cells = <1>;
 401                                 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 402                                 ranges = <0xfffff200 0xfffff200 0xa00>;
 403                                 atmel,mux-mask = <
 404                                         /*   A          B          C  */
 405                                         0xffffffff 0xc0fc0000 0xc0ff0000        /* pioA */
 406                                         0xffffffff 0x0ff8ffff 0x00000000        /* pioB */
 407                                         0xffffffff 0xbc00f1ff 0x7c00fc00        /* pioC */
 408                                         0xffffffff 0xc001c0e0 0x0001c1e0        /* pioD */
 409                                         0xffffffff 0xbf9f8000 0x18000000        /* pioE */
 410                                         >;
 411
 412                                 /* shared pinctrl settings */
 413                                 adc0 {
 414                                         pinctrl_adc0_adtrg: adc0_adtrg {
 415                                                 atmel,pins =
 416                                                         <3 19 0x1 0x0>; /* PD19 periph A ADTRG */
 417                                         };
 418                                         pinctrl_adc0_ad0: adc0_ad0 {
 419                                                 atmel,pins =
 420                                                         <3 20 0x1 0x0>; /* PD20 periph A AD0 */
 421                                         };
 422                                         pinctrl_adc0_ad1: adc0_ad1 {
 423                                                 atmel,pins =
 424                                                         <3 21 0x1 0x0>; /* PD21 periph A AD1 */
 425                                         };
 426                                         pinctrl_adc0_ad2: adc0_ad2 {
 427                                                 atmel,pins =
 428                                                         <3 22 0x1 0x0>; /* PD22 periph A AD2 */
 429                                         };
 430                                         pinctrl_adc0_ad3: adc0_ad3 {
 431                                                 atmel,pins =
 432                                                         <3 23 0x1 0x0>; /* PD23 periph A AD3 */
 433                                         };
 434                                         pinctrl_adc0_ad4: adc0_ad4 {
 435                                                 atmel,pins =
 436                                                         <3 24 0x1 0x0>; /* PD24 periph A AD4 */
 437                                         };
 438                                         pinctrl_adc0_ad5: adc0_ad5 {
 439                                                 atmel,pins =
 440                                                         <3 25 0x1 0x0>; /* PD25 periph A AD5 */
 441                                         };
 442                                         pinctrl_adc0_ad6: adc0_ad6 {
 443                                                 atmel,pins =
 444                                                         <3 26 0x1 0x0>; /* PD26 periph A AD6 */
 445                                         };
 446                                         pinctrl_adc0_ad7: adc0_ad7 {
 447                                                 atmel,pins =
 448                                                         <3 27 0x1 0x0>; /* PD27 periph A AD7 */
 449                                         };
 450                                         pinctrl_adc0_ad8: adc0_ad8 {
 451                                                 atmel,pins =
 452                                                         <3 28 0x1 0x0>; /* PD28 periph A AD8 */
 453                                         };
 454                                         pinctrl_adc0_ad9: adc0_ad9 {
 455                                                 atmel,pins =
 456                                                         <3 29 0x1 0x0>; /* PD29 periph A AD9 */
 457                                         };
 458                                         pinctrl_adc0_ad10: adc0_ad10 {
 459                                                 atmel,pins =
 460                                                         <3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */
 461                                         };
 462                                         pinctrl_adc0_ad11: adc0_ad11 {
 463                                                 atmel,pins =
 464                                                         <3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */
 465                                         };
 466                                 };
 467
 468                                 can0 {
 469                                         pinctrl_can0_rx_tx: can0_rx_tx {
 470                                                 atmel,pins =
 471                                                         <3 14 0x3 0x0   /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
 472                                                          3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
 473                                         };
 474                                 };
 475
 476                                 can1 {
 477                                         pinctrl_can1_rx_tx: can1_rx_tx {
 478                                                 atmel,pins =
 479                                                         <1 14 0x2 0x0   /* PB14 periph B RX, conflicts with GCRS */
 480                                                          1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */
 481                                         };
 482                                 };
 483
 484                                 dbgu {
 485                                         pinctrl_dbgu: dbgu-0 {
 486                                                 atmel,pins =
 487                                                         <1 30 0x1 0x0   /* PB30 periph A */
 488                                                          1 31 0x1 0x1>; /* PB31 periph A with pullup */
 489                                         };
 490                                 };
 491
 492                                 i2c0 {
 493                                         pinctrl_i2c0: i2c0-0 {
 494                                                 atmel,pins =
 495                                                         <0 30 0x1 0x0   /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
 496                                                          0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
 497                                         };
 498                                 };
 499
 500                                 i2c1 {
 501                                         pinctrl_i2c1: i2c1-0 {
 502                                                 atmel,pins =
 503                                                         <2 26 0x2 0x0   /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
 504                                                          2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
 505                                         };
 506                                 };
 507
 508                                 isi {
 509                                         pinctrl_isi: isi-0 {
 510                                                 atmel,pins =
 511                                                         <0 16 0x3 0x0   /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
 512                                                          0 17 0x3 0x0   /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
 513                                                          0 18 0x3 0x0   /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
 514                                                          0 19 0x3 0x0   /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
 515                                                          0 20 0x3 0x0   /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
 516                                                          0 21 0x3 0x0   /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
 517                                                          0 22 0x3 0x0   /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
 518                                                          0 23 0x3 0x0   /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
 519                                                          2 30 0x3 0x0   /* PC30 periph C ISI_PCK, conflicts with UTXD0 */
 520                                                          0 31 0x3 0x0   /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
 521                                                          0 30 0x3 0x0   /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
 522                                                          2 29 0x3 0x0   /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
 523                                                          2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
 524                                         };
 525                                         pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
 526                                                 atmel,pins =
 527                                                         <3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */
 528                                         };
 529                                 };
 530
 531                                 lcd {
 532                                         pinctrl_lcd: lcd-0 {
 533                                                 atmel,pins =
 534                                                         <0 24 0x1 0x0   /* PA24 periph A LCDPWM */
 535                                                          0 26 0x1 0x0   /* PA26 periph A LCDVSYNC */
 536                                                          0 27 0x1 0x0   /* PA27 periph A LCDHSYNC */
 537                                                          0 25 0x1 0x0   /* PA25 periph A LCDDISP */
 538                                                          0 29 0x1 0x0   /* PA29 periph A LCDDEN */
 539                                                          0 28 0x1 0x0   /* PA28 periph A LCDPCK */
 540                                                          0 0 0x1 0x0    /* PA0 periph A LCDD0 pin */
 541                                                          0 1 0x1 0x0    /* PA1 periph A LCDD1 pin */
 542                                                          0 2 0x1 0x0    /* PA2 periph A LCDD2 pin */
 543                                                          0 3 0x1 0x0    /* PA3 periph A LCDD3 pin */
 544                                                          0 4 0x1 0x0    /* PA4 periph A LCDD4 pin */
 545                                                          0 5 0x1 0x0    /* PA5 periph A LCDD5 pin */
 546                                                          0 6 0x1 0x0    /* PA6 periph A LCDD6 pin */
 547                                                          0 7 0x1 0x0    /* PA7 periph A LCDD7 pin */
 548                                                          0 8 0x1 0x0    /* PA8 periph A LCDD8 pin */
 549                                                          0 9 0x1 0x0    /* PA9 periph A LCDD9 pin */
 550                                                          0 10 0x1 0x0   /* PA10 periph A LCDD10 pin */
 551                                                          0 11 0x1 0x0   /* PA11 periph A LCDD11 pin */
 552                                                          0 12 0x1 0x0   /* PA12 periph A LCDD12 pin */
 553                                                          0 13 0x1 0x0   /* PA13 periph A LCDD13 pin */
 554                                                          0 14 0x1 0x0   /* PA14 periph A LCDD14 pin */
 555                                                          0 15 0x1 0x0   /* PA15 periph A LCDD15 pin */
 556                                                          2 14 0x3 0x0   /* PC14 periph C LCDD16 pin */
 557                                                          2 13 0x3 0x0   /* PC13 periph C LCDD17 pin */
 558                                                          2 12 0x3 0x0   /* PC12 periph C LCDD18 pin */
 559                                                          2 11 0x3 0x0   /* PC11 periph C LCDD19 pin */
 560                                                          2 10 0x3 0x0   /* PC10 periph C LCDD20 pin */
 561                                                          2 15 0x3 0x0   /* PC15 periph C LCDD21 pin */
 562                                                          4 27 0x3 0x0   /* PE27 periph C LCDD22 pin */
 563                                                          4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */
 564                                         };
 565                                 };
 566
 567                                 macb0 {
 568                                         pinctrl_macb0_data_rgmii: macb0_data_rgmii {
 569                                                 atmel,pins =
 570                                                         <1 0 0x1 0x0    /* PB0 periph A GTX0, conflicts with PWMH0 */
 571                                                          1 1 0x1 0x0    /* PB1 periph A GTX1, conflicts with PWML0 */
 572                                                          1 2 0x1 0x0    /* PB2 periph A GTX2, conflicts with TK1 */
 573                                                          1 3 0x1 0x0    /* PB3 periph A GTX3, conflicts with TF1 */
 574                                                          1 4 0x1 0x0    /* PB4 periph A GRX0, conflicts with PWMH1 */
 575                                                          1 5 0x1 0x0    /* PB5 periph A GRX1, conflicts with PWML1 */
 576                                                          1 6 0x1 0x0    /* PB6 periph A GRX2, conflicts with TD1 */
 577                                                          1 7 0x1 0x0>;  /* PB7 periph A GRX3, conflicts with RK1 */
 578                                         };
 579                                         pinctrl_macb0_data_gmii: macb0_data_gmii {
 580                                                 atmel,pins =
 581                                                         <1 19 0x2 0x0   /* PB19 periph B GTX4, conflicts with MCI1_CDA */
 582                                                          1 20 0x2 0x0   /* PB20 periph B GTX5, conflicts with MCI1_DA0 */
 583                                                          1 21 0x2 0x0   /* PB21 periph B GTX6, conflicts with MCI1_DA1 */
 584                                                          1 22 0x2 0x0   /* PB22 periph B GTX7, conflicts with MCI1_DA2 */
 585                                                          1 23 0x2 0x0   /* PB23 periph B GRX4, conflicts with MCI1_DA3 */
 586                                                          1 24 0x2 0x0   /* PB24 periph B GRX5, conflicts with MCI1_CK */
 587                                                          1 25 0x2 0x0   /* PB25 periph B GRX6, conflicts with SCK1 */
 588                                                          1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */
 589                                         };
 590                                         pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
 591                                                 atmel,pins =
 592                                                         <1 8 0x1 0x0    /* PB8 periph A GTXCK, conflicts with PWMH2 */
 593                                                          1 9 0x1 0x0    /* PB9 periph A GTXEN, conflicts with PWML2 */
 594                                                          1 11 0x1 0x0   /* PB11 periph A GRXCK, conflicts with RD1 */
 595                                                          1 13 0x1 0x0   /* PB13 periph A GRXER, conflicts with PWML3 */
 596                                                          1 16 0x1 0x0   /* PB16 periph A GMDC */
 597                                                          1 17 0x1 0x0   /* PB17 periph A GMDIO */
 598                                                          1 18 0x1 0x0>; /* PB18 periph A G125CK */
 599                                         };
 600                                         pinctrl_macb0_signal_gmii: macb0_signal_gmii {
 601                                                 atmel,pins =
 602                                                         <1 9 0x1 0x0    /* PB9 periph A GTXEN, conflicts with PWML2 */
 603                                                          1 10 0x1 0x0   /* PB10 periph A GTXER, conflicts with RF1 */
 604                                                          1 11 0x1 0x0   /* PB11 periph A GRXCK, conflicts with RD1 */
 605                                                          1 12 0x1 0x0   /* PB12 periph A GRXDV, conflicts with PWMH3 */
 606                                                          1 13 0x1 0x0   /* PB13 periph A GRXER, conflicts with PWML3 */
 607                                                          1 14 0x1 0x0   /* PB14 periph A GCRS, conflicts with CANRX1 */
 608                                                          1 15 0x1 0x0   /* PB15 periph A GCOL, conflicts with CANTX1 */
 609                                                          1 16 0x1 0x0   /* PB16 periph A GMDC */
 610                                                          1 17 0x1 0x0   /* PB17 periph A GMDIO */
 611                                                          1 27 0x2 0x0>; /* PB27 periph B G125CKO */
 612                                         };
 613
 614                                 };
 615
 616                                 macb1 {
 617                                         pinctrl_macb1_rmii: macb1_rmii-0 {
 618                                                 atmel,pins =
 619                                                         <2 0 0x1 0x0    /* PC0 periph A ETX0, conflicts with TIOA3 */
 620                                                          2 1 0x1 0x0    /* PC1 periph A ETX1, conflicts with TIOB3 */
 621                                                          2 2 0x1 0x0    /* PC2 periph A ERX0, conflicts with TCLK3 */
 622                                                          2 3 0x1 0x0    /* PC3 periph A ERX1, conflicts with TIOA4 */
 623                                                          2 4 0x1 0x0    /* PC4 periph A ETXEN, conflicts with TIOB4 */
 624                                                          2 5 0x1 0x0    /* PC5 periph A ECRSDV,conflicts with TCLK4 */
 625                                                          2 6 0x1 0x0    /* PC6 periph A ERXER, conflicts with TIOA5 */
 626                                                          2 7 0x1 0x0    /* PC7 periph A EREFCK, conflicts with TIOB5 */
 627                                                          2 8 0x1 0x0    /* PC8 periph A EMDC, conflicts with TCLK5 */
 628                                                          2 9 0x1 0x0>;  /* PC9 periph A EMDIO  */
 629                                         };
 630                                 };
 631
 632                                 mmc0 {
 633                                         pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
 634                                                 atmel,pins =
 635                                                         <3 9 0x1 0x0    /* PD9 periph A MCI0_CK */
 636                                                          3 0 0x1 0x1    /* PD0 periph A MCI0_CDA with pullup */
 637                                                          3 1 0x1 0x1>;  /* PD1 periph A MCI0_DA0 with pullup */
 638                                         };
 639                                         pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
 640                                                 atmel,pins =
 641                                                         <3 2 0x1 0x1    /* PD2 periph A MCI0_DA1 with pullup */
 642                                                          3 3 0x1 0x1    /* PD3 periph A MCI0_DA2 with pullup */
 643                                                          3 4 0x1 0x1>;  /* PD4 periph A MCI0_DA3 with pullup */
 644                                         };
 645                                         pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
 646                                                 atmel,pins =
 647                                                         <3 5 0x1 0x1    /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
 648                                                          3 6 0x1 0x1    /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
 649                                                          3 7 0x1 0x1    /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
 650                                                          3 8 0x1 0x1>;  /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
 651                                         };
 652                                 };
 653
 654                                 mmc1 {
 655                                         pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
 656                                                 atmel,pins =
 657                                                         <1 24 0x1 0x0   /* PB24 periph A MCI1_CK, conflicts with GRX5 */
 658                                                          1 19 0x1 0x1   /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
 659                                                          1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
 660                                         };
 661                                         pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
 662                                                 atmel,pins =
 663                                                         <1 21 0x1 0x1   /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
 664                                                          1 22 0x1 0x1   /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
 665                                                          1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
 666                                         };
 667                                 };
 668
 669                                 mmc2 {
 670                                         pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
 671                                                 atmel,pins =
 672                                                         <2 15 0x1 0x0   /* PC15 periph A MCI2_CK, conflicts with PCK2 */
 673                                                          2 10 0x1 0x1   /* PC10 periph A MCI2_CDA with pullup */
 674                                                          2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */
 675                                         };
 676                                         pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
 677                                                 atmel,pins =
 678                                                         <2 12 0x1 0x0   /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
 679                                                          2 13 0x1 0x0   /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
 680                                                          2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
 681                                         };
 682                                 };
 683
 684                                 nand0 {
 685                                         pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
 686                                                 atmel,pins =
 687                                                         <4 21 0x1 0x1   /* PE21 periph A with pullup */
 688                                                          4 22 0x1 0x1>; /* PE22 periph A with pullup */
 689                                         };
 690                                 };
 691
 692                                 pioA: gpio@fffff200 {
 693                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 694                                         reg = <0xfffff200 0x100>;
 695                                         interrupts = <6 4 1>;
 696                                         #gpio-cells = <2>;
 697                                         gpio-controller;
 698                                         interrupt-controller;
 699                                         #interrupt-cells = <2>;
 700                                 };
 701
 702                                 pioB: gpio@fffff400 {
 703                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 704                                         reg = <0xfffff400 0x100>;
 705                                         interrupts = <7 4 1>;
 706                                         #gpio-cells = <2>;
 707                                         gpio-controller;
 708                                         interrupt-controller;
 709                                         #interrupt-cells = <2>;
 710                                 };
 711
 712                                 pioC: gpio@fffff600 {
 713                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 714                                         reg = <0xfffff600 0x100>;
 715                                         interrupts = <8 4 1>;
 716                                         #gpio-cells = <2>;
 717                                         gpio-controller;
 718                                         interrupt-controller;
 719                                         #interrupt-cells = <2>;
 720                                 };
 721
 722                                 pioD: gpio@fffff800 {
 723                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 724                                         reg = <0xfffff800 0x100>;
 725                                         interrupts = <9 4 1>;
 726                                         #gpio-cells = <2>;
 727                                         gpio-controller;
 728                                         interrupt-controller;
 729                                         #interrupt-cells = <2>;
 730                                 };
 731
 732                                 pioE: gpio@fffffa00 {
 733                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 734                                         reg = <0xfffffa00 0x100>;
 735                                         interrupts = <10 4 1>;
 736                                         #gpio-cells = <2>;
 737                                         gpio-controller;
 738                                         interrupt-controller;
 739                                         #interrupt-cells = <2>;
 740                                 };
 741
 742                                 spi0 {
 743                                         pinctrl_spi0: spi0-0 {
 744                                                 atmel,pins =
 745                                                         <3 10 0x1 0x0   /* PD10 periph A SPI0_MISO pin */
 746                                                          3 11 0x1 0x0   /* PD11 periph A SPI0_MOSI pin */
 747                                                          3 12 0x1 0x0   /* PD12 periph A SPI0_SPCK pin */
 748                                                          3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */
 749                                         };
 750                                 };
 751
 752                                 spi1 {
 753                                         pinctrl_spi1: spi1-0 {
 754                                                 atmel,pins =
 755                                                         <2 22 0x1 0x0   /* PC22 periph A SPI1_MISO pin */
 756                                                          2 23 0x1 0x0   /* PC23 periph A SPI1_MOSI pin */
 757                                                          2 24 0x1 0x0   /* PC24 periph A SPI1_SPCK pin */
 758                                                          2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */
 759                                         };
 760                                 };
 761
 762                                 ssc0 {
 763                                         pinctrl_ssc0_tx: ssc0_tx {
 764                                                 atmel,pins =
 765                                                         <2 16 0x1 0x0   /* PC16 periph A TK0 */
 766                                                          2 17 0x1 0x0   /* PC17 periph A TF0 */
 767                                                          2 18 0x1 0x0>; /* PC18 periph A TD0 */
 768                                         };
 769
 770                                         pinctrl_ssc0_rx: ssc0_rx {
 771                                                 atmel,pins =
 772                                                         <2 19 0x1 0x0   /* PC19 periph A RK0 */
 773                                                          2 20 0x1 0x0   /* PC20 periph A RF0 */
 774                                                          2 21 0x1 0x0>; /* PC21 periph A RD0 */
 775                                         };
 776                                 };
 777
 778                                 ssc1 {
 779                                         pinctrl_ssc1_tx: ssc1_tx {
 780                                                 atmel,pins =
 781                                                         <1 2 0x2 0x0    /* PB2 periph B TK1, conflicts with GTX2 */
 782                                                          1 3 0x2 0x0    /* PB3 periph B TF1, conflicts with GTX3 */
 783                                                          1 6 0x2 0x0>;  /* PB6 periph B TD1, conflicts with TD1 */
 784                                         };
 785
 786                                         pinctrl_ssc1_rx: ssc1_rx {
 787                                                 atmel,pins =
 788                                                         <1 7 0x2 0x0    /* PB7 periph B RK1, conflicts with EREFCK */
 789                                                          1 10 0x2 0x0   /* PB10 periph B RF1, conflicts with GTXER */
 790                                                          1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */
 791                                         };
 792                                 };
 793
 794                                 uart0 {
 795                                         pinctrl_uart0: uart0-0 {
 796                                                 atmel,pins =
 797                                                         <2 29 0x1 0x0   /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
 798                                                          2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */
 799                                         };
 800                                 };
 801
 802                                 uart1 {
 803                                         pinctrl_uart1: uart1-0 {
 804                                                 atmel,pins =
 805                                                         <0 30 0x2 0x0   /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
 806                                                          0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
 807                                         };
 808                                 };
 809
 810                                 usart0 {
 811                                         pinctrl_usart0: usart0-0 {
 812                                                 atmel,pins =
 813                                                         <3 17 0x1 0x0   /* PD17 periph A */
 814                                                          3 18 0x1 0x1>; /* PD18 periph A with pullup */
 815                                         };
 816
 817                                         pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
 818                                                 atmel,pins =
 819                                                         <3 15 0x1 0x0   /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
 820                                                          3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
 821                                         };
 822                                 };
 823
 824                                 usart1 {
 825                                         pinctrl_usart1: usart1-0 {
 826                                                 atmel,pins =
 827                                                         <1 28 0x1 0x0   /* PB28 periph A */
 828                                                          1 29 0x1 0x1>; /* PB29 periph A with pullup */
 829                                         };
 830
 831                                         pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
 832                                                 atmel,pins =
 833                                                         <1 26 0x1 0x0   /* PB26 periph A, conflicts with GRX7 */
 834                                                          1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */
 835                                         };
 836                                 };
 837
 838                                 usart2 {
 839                                         pinctrl_usart2: usart2-0 {
 840                                                 atmel,pins =
 841                                                         <4 25 0x2 0x0   /* PE25 periph B, conflicts with A25 */
 842                                                          4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */
 843                                         };
 844
 845                                         pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
 846                                                 atmel,pins =
 847                                                         <4 23 0x2 0x0   /* PE23 periph B, conflicts with A23 */
 848                                                          4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */
 849                                         };
 850                                 };
 851
 852                                 usart3 {
 853                                         pinctrl_usart3: usart3-0 {
 854                                                 atmel,pins =
 855                                                         <4 18 0x2 0x0   /* PE18 periph B, conflicts with A18 */
 856                                                          4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */
 857                                         };
 858
 859                                         pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
 860                                                 atmel,pins =
 861                                                         <4 16 0x2 0x0   /* PE16 periph B, conflicts with A16 */
 862                                                          4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */
 863                                         };
 864                                 };
 865                         };
 866
 867                         pmc: pmc@fffffc00 {
 868                                 compatible = "atmel,at91rm9200-pmc";
 869                                 reg = <0xfffffc00 0x120>;
 870                         };
 871
 872                         rstc@fffffe00 {
 873                                 compatible = "atmel,at91sam9g45-rstc";
 874                                 reg = <0xfffffe00 0x10>;
 875                         };
 876
 877                         pit: timer@fffffe30 {
 878                                 compatible = "atmel,at91sam9260-pit";
 879                                 reg = <0xfffffe30 0xf>;
 880                                 interrupts = <3 4 5>;
 881                         };
 882
 883                         watchdog@fffffe40 {
 884                                 compatible = "atmel,at91sam9260-wdt";
 885                                 reg = <0xfffffe40 0x10>;
 886                                 status = "disabled";
 887                         };
 888
 889                         rtc@fffffeb0 {
 890                                 compatible = "atmel,at91rm9200-rtc";
 891                                 reg = <0xfffffeb0 0x30>;
 892                                 interrupts = <1 4 7>;
 893                         };
 894                 };
 895
 896                 usb0: gadget@00500000 {
 897                         #address-cells = <1>;
 898                         #size-cells = <0>;
 899                         compatible = "atmel,at91sam9rl-udc";
 900                         reg = <0x00500000 0x100000
 901                                0xf8030000 0x4000>;
 902                         interrupts = <33 4 2>;
 903                         status = "disabled";
 904
 905                         ep0 {
 906                                 reg = <0>;
 907                                 atmel,fifo-size = <64>;
 908                                 atmel,nb-banks = <1>;
 909                         };
 910
 911                         ep1 {
 912                                 reg = <1>;
 913                                 atmel,fifo-size = <1024>;
 914                                 atmel,nb-banks = <3>;
 915                                 atmel,can-dma;
 916                                 atmel,can-isoc;
 917                         };
 918
 919                         ep2 {
 920                                 reg = <2>;
 921                                 atmel,fifo-size = <1024>;
 922                                 atmel,nb-banks = <3>;
 923                                 atmel,can-dma;
 924                                 atmel,can-isoc;
 925                         };
 926
 927                         ep3 {
 928                                 reg = <3>;
 929                                 atmel,fifo-size = <1024>;
 930                                 atmel,nb-banks = <2>;
 931                                 atmel,can-dma;
 932                         };
 933
 934                         ep4 {
 935                                 reg = <4>;
 936                                 atmel,fifo-size = <1024>;
 937                                 atmel,nb-banks = <2>;
 938                                 atmel,can-dma;
 939                         };
 940
 941                         ep5 {
 942                                 reg = <5>;
 943                                 atmel,fifo-size = <1024>;
 944                                 atmel,nb-banks = <2>;
 945                                 atmel,can-dma;
 946                         };
 947
 948                         ep6 {
 949                                 reg = <6>;
 950                                 atmel,fifo-size = <1024>;
 951                                 atmel,nb-banks = <2>;
 952                                 atmel,can-dma;
 953                         };
 954
 955                         ep7 {
 956                                 reg = <7>;
 957                                 atmel,fifo-size = <1024>;
 958                                 atmel,nb-banks = <2>;
 959                                 atmel,can-dma;
 960                         };
 961
 962                         ep8 {
 963                                 reg = <8>;
 964                                 atmel,fifo-size = <1024>;
 965                                 atmel,nb-banks = <2>;
 966                         };
 967
 968                         ep9 {
 969                                 reg = <9>;
 970                                 atmel,fifo-size = <1024>;
 971                                 atmel,nb-banks = <2>;
 972                         };
 973
 974                         ep10 {
 975                                 reg = <10>;
 976                                 atmel,fifo-size = <1024>;
 977                                 atmel,nb-banks = <2>;
 978                         };
 979
 980                         ep11 {
 981                                 reg = <11>;
 982                                 atmel,fifo-size = <1024>;
 983                                 atmel,nb-banks = <2>;
 984                         };
 985
 986                         ep12 {
 987                                 reg = <12>;
 988                                 atmel,fifo-size = <1024>;
 989                                 atmel,nb-banks = <2>;
 990                         };
 991
 992                         ep13 {
 993                                 reg = <13>;
 994                                 atmel,fifo-size = <1024>;
 995                                 atmel,nb-banks = <2>;
 996                         };
 997
 998                         ep14 {
 999                                 reg = <14>;
1000                                 atmel,fifo-size = <1024>;
1001                                 atmel,nb-banks = <2>;
1002                         };
1003
1004                         ep15 {
1005                                 reg = <15>;
1006                                 atmel,fifo-size = <1024>;
1007                                 atmel,nb-banks = <2>;
1008                         };
1009                 };
1010
1011                 usb1: ohci@00600000 {
1012                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1013                         reg = <0x00600000 0x100000>;
1014                         interrupts = <32 4 2>;
1015                         status = "disabled";
1016                 };
1017
1018                 usb2: ehci@00700000 {
1019                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
1020                         reg = <0x00700000 0x100000>;
1021                         interrupts = <32 4 2>;
1022                         status = "disabled";
1023                 };
1024
1025                 nand0: nand@60000000 {
1026                         compatible = "atmel,at91rm9200-nand";
1027                         #address-cells = <1>;
1028                         #size-cells = <1>;
1029                         reg = < 0x60000000 0x01000000   /* EBI CS3 */
1030                                 0xffffc070 0x00000490   /* SMC PMECC regs */
1031                                 0xffffc500 0x00000100   /* SMC PMECC Error Location regs */
1032                                 0x00100000 0x00100000   /* ROM code */
1033                                 0x70000000 0x10000000   /* NFC Command Registers */
1034                                 0xffffc000 0x00000070   /* NFC HSMC regs */
1035                                 0x00200000 0x00100000   /* NFC SRAM banks */
1036                                 >;
1037                         interrupts = <5 4 6>;
1038                         atmel,nand-addr-offset = <21>;
1039                         atmel,nand-cmd-offset = <22>;
1040                         pinctrl-names = "default";
1041                         pinctrl-0 = <&pinctrl_nand0_ale_cle>;
1042                         atmel,pmecc-lookup-table-offset = <0x10000 0x18000>;
1043                         status = "disabled";
1044                 };
1045         };
1046 };