Pileus Git - ~andy/linux/blob - arch/arm/boot/dts/moxart-uc7112lx.dts

   1 /* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
   2  *
   3  * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
   4  *
   5  * Licensed under GPLv2 or later.
   6  */
   7
   8 /dts-v1/;
   9 /include/ "moxart.dtsi"
  10
  11 / {
  12         model = "MOXA UC-7112-LX";
  13         compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
  14
  15         memory {
  16                 device_type = "memory";
  17                 reg = <0x0 0x2000000>;
  18         };
  19
  20         flash@80000000,0 {
  21                 compatible = "numonyx,js28f128", "cfi-flash";
  22                 reg = <0x80000000 0x1000000>;
  23                 bank-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26                 partition@0 {
  27                         label = "bootloader";
  28                         reg = <0x0 0x40000>;
  29                 };
  30                 partition@40000 {
  31                         label = "linux kernel";
  32                         reg = <0x40000 0x1C0000>;
  33                 };
  34                 partition@200000 {
  35                         label = "root filesystem";
  36                         reg = <0x200000 0x800000>;
  37                 };
  38                 partition@a00000 {
  39                         label = "user filesystem";
  40                         reg = <0xa00000 0x600000>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46                 user-led {
  47                         label = "ready-led";
  48                         gpios = <&gpio 27 0x1>;
  49                         default-state = "on";
  50                         linux,default-trigger = "default-on";
  51                 };
  52         };
  53
  54         gpio_keys_polled {
  55                 compatible = "gpio-keys-polled";
  56                 #address-cells = <1>;
  57                 #size-cells = <0>;
  58                 poll-interval = <500>;
  59                 button@25 {
  60                         label = "GPIO Reset";
  61                         linux,code = <116>;
  62                         gpios = <&gpio 25 1>;
  63                 };
  64         };
  65
  66         chosen {
  67                 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
  68         };
  69 };
  70
  71 &clk_pll {
  72         clocks = <&ref12>;
  73 };
  74
  75 &sdhci {
  76         status = "okay";
  77 };
  78
  79 &mdio0 {
  80         status = "okay";
  81
  82         ethphy0: ethernet-phy@1 {
  83                 device_type = "ethernet-phy";
  84                 compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
  85                 reg = <1>;
  86         };
  87 };
  88
  89 &mdio1 {
  90         status = "okay";
  91
  92         ethphy1: ethernet-phy@1 {
  93                 device_type = "ethernet-phy";
  94                 compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
  95                 reg = <1>;
  96         };
  97 };
  98
  99 &mac0 {
 100         status = "okay";
 101 };
 102
 103 &mac1 {
 104         status = "okay";
 105 };
 106
 107 &uart0 {
 108         status = "okay";
 109 };