Pileus Git - ~andy/linux/blob - arch/arm/boot/dts/imx6q.dtsi

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 /include/ "skeleton.dtsi"
  14
  15 / {
  16         aliases {
  17                 serial0 = &uart1;
  18                 serial1 = &uart2;
  19                 serial2 = &uart3;
  20                 serial3 = &uart4;
  21                 serial4 = &uart5;
  22                 gpio0 = &gpio1;
  23                 gpio1 = &gpio2;
  24                 gpio2 = &gpio3;
  25                 gpio3 = &gpio4;
  26                 gpio4 = &gpio5;
  27                 gpio5 = &gpio6;
  28                 gpio6 = &gpio7;
  29         };
  30
  31         cpus {
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34
  35                 cpu@0 {
  36                         compatible = "arm,cortex-a9";
  37                         reg = <0>;
  38                         next-level-cache = <&L2>;
  39                         operating-points = <
  40                                 /* kHz    uV */
  41                                 792000  1100000
  42                                 396000  950000
  43                                 198000  850000
  44                         >;
  45                         clock-latency = <61036>; /* two CLK32 periods */
  46                         cpu0-supply = <&reg_cpu>;
  47                 };
  48
  49                 cpu@1 {
  50                         compatible = "arm,cortex-a9";
  51                         reg = <1>;
  52                         next-level-cache = <&L2>;
  53                 };
  54
  55                 cpu@2 {
  56                         compatible = "arm,cortex-a9";
  57                         reg = <2>;
  58                         next-level-cache = <&L2>;
  59                 };
  60
  61                 cpu@3 {
  62                         compatible = "arm,cortex-a9";
  63                         reg = <3>;
  64                         next-level-cache = <&L2>;
  65                 };
  66         };
  67
  68         intc: interrupt-controller@00a01000 {
  69                 compatible = "arm,cortex-a9-gic";
  70                 #interrupt-cells = <3>;
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73                 interrupt-controller;
  74                 reg = <0x00a01000 0x1000>,
  75                       <0x00a00100 0x100>;
  76         };
  77
  78         clocks {
  79                 #address-cells = <1>;
  80                 #size-cells = <0>;
  81
  82                 ckil {
  83                         compatible = "fsl,imx-ckil", "fixed-clock";
  84                         clock-frequency = <32768>;
  85                 };
  86
  87                 ckih1 {
  88                         compatible = "fsl,imx-ckih1", "fixed-clock";
  89                         clock-frequency = <0>;
  90                 };
  91
  92                 osc {
  93                         compatible = "fsl,imx-osc", "fixed-clock";
  94                         clock-frequency = <24000000>;
  95                 };
  96         };
  97
  98         soc {
  99                 #address-cells = <1>;
 100                 #size-cells = <1>;
 101                 compatible = "simple-bus";
 102                 interrupt-parent = <&intc>;
 103                 ranges;
 104
 105                 dma-apbh@00110000 {
 106                         compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 107                         reg = <0x00110000 0x2000>;
 108                         clocks = <&clks 106>;
 109                 };
 110
 111                 nfc: gpmi-nand@00112000 {
 112                         compatible = "fsl,imx6q-gpmi-nand";
 113                         #address-cells = <1>;
 114                         #size-cells = <1>;
 115                         reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
 116                         reg-names = "gpmi-nand", "bch";
 117                         interrupts = <0 13 0x04>, <0 15 0x04>;
 118                         interrupt-names = "gpmi-dma", "bch";
 119                         clocks = <&clks 152>, <&clks 153>, <&clks 151>,
 120                                  <&clks 150>, <&clks 149>;
 121                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 122                                       "gpmi_bch_apb", "per1_bch";
 123                         fsl,gpmi-dma-channel = <0>;
 124                         status = "disabled";
 125                 };
 126
 127                 timer@00a00600 {
 128                         compatible = "arm,cortex-a9-twd-timer";
 129                         reg = <0x00a00600 0x20>;
 130                         interrupts = <1 13 0xf01>;
 131                 };
 132
 133                 L2: l2-cache@00a02000 {
 134                         compatible = "arm,pl310-cache";
 135                         reg = <0x00a02000 0x1000>;
 136                         interrupts = <0 92 0x04>;
 137                         cache-unified;
 138                         cache-level = <2>;
 139                 };
 140
 141                 aips-bus@02000000 { /* AIPS1 */
 142                         compatible = "fsl,aips-bus", "simple-bus";
 143                         #address-cells = <1>;
 144                         #size-cells = <1>;
 145                         reg = <0x02000000 0x100000>;
 146                         ranges;
 147
 148                         spba-bus@02000000 {
 149                                 compatible = "fsl,spba-bus", "simple-bus";
 150                                 #address-cells = <1>;
 151                                 #size-cells = <1>;
 152                                 reg = <0x02000000 0x40000>;
 153                                 ranges;
 154
 155                                 spdif: spdif@02004000 {
 156                                         reg = <0x02004000 0x4000>;
 157                                         interrupts = <0 52 0x04>;
 158                                 };
 159
 160                                 ecspi1: ecspi@02008000 {
 161                                         #address-cells = <1>;
 162                                         #size-cells = <0>;
 163                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 164                                         reg = <0x02008000 0x4000>;
 165                                         interrupts = <0 31 0x04>;
 166                                         clocks = <&clks 112>, <&clks 112>;
 167                                         clock-names = "ipg", "per";
 168                                         status = "disabled";
 169                                 };
 170
 171                                 ecspi2: ecspi@0200c000 {
 172                                         #address-cells = <1>;
 173                                         #size-cells = <0>;
 174                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 175                                         reg = <0x0200c000 0x4000>;
 176                                         interrupts = <0 32 0x04>;
 177                                         clocks = <&clks 113>, <&clks 113>;
 178                                         clock-names = "ipg", "per";
 179                                         status = "disabled";
 180                                 };
 181
 182                                 ecspi3: ecspi@02010000 {
 183                                         #address-cells = <1>;
 184                                         #size-cells = <0>;
 185                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 186                                         reg = <0x02010000 0x4000>;
 187                                         interrupts = <0 33 0x04>;
 188                                         clocks = <&clks 114>, <&clks 114>;
 189                                         clock-names = "ipg", "per";
 190                                         status = "disabled";
 191                                 };
 192
 193                                 ecspi4: ecspi@02014000 {
 194                                         #address-cells = <1>;
 195                                         #size-cells = <0>;
 196                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 197                                         reg = <0x02014000 0x4000>;
 198                                         interrupts = <0 34 0x04>;
 199                                         clocks = <&clks 115>, <&clks 115>;
 200                                         clock-names = "ipg", "per";
 201                                         status = "disabled";
 202                                 };
 203
 204                                 ecspi5: ecspi@02018000 {
 205                                         #address-cells = <1>;
 206                                         #size-cells = <0>;
 207                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 208                                         reg = <0x02018000 0x4000>;
 209                                         interrupts = <0 35 0x04>;
 210                                         clocks = <&clks 116>, <&clks 116>;
 211                                         clock-names = "ipg", "per";
 212                                         status = "disabled";
 213                                 };
 214
 215                                 uart1: serial@02020000 {
 216                                         compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 217                                         reg = <0x02020000 0x4000>;
 218                                         interrupts = <0 26 0x04>;
 219                                         clocks = <&clks 160>, <&clks 161>;
 220                                         clock-names = "ipg", "per";
 221                                         status = "disabled";
 222                                 };
 223
 224                                 esai: esai@02024000 {
 225                                         reg = <0x02024000 0x4000>;
 226                                         interrupts = <0 51 0x04>;
 227                                 };
 228
 229                                 ssi1: ssi@02028000 {
 230                                         compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 231                                         reg = <0x02028000 0x4000>;
 232                                         interrupts = <0 46 0x04>;
 233                                         clocks = <&clks 178>;
 234                                         fsl,fifo-depth = <15>;
 235                                         fsl,ssi-dma-events = <38 37>;
 236                                         status = "disabled";
 237                                 };
 238
 239                                 ssi2: ssi@0202c000 {
 240                                         compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 241                                         reg = <0x0202c000 0x4000>;
 242                                         interrupts = <0 47 0x04>;
 243                                         clocks = <&clks 179>;
 244                                         fsl,fifo-depth = <15>;
 245                                         fsl,ssi-dma-events = <42 41>;
 246                                         status = "disabled";
 247                                 };
 248
 249                                 ssi3: ssi@02030000 {
 250                                         compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 251                                         reg = <0x02030000 0x4000>;
 252                                         interrupts = <0 48 0x04>;
 253                                         clocks = <&clks 180>;
 254                                         fsl,fifo-depth = <15>;
 255                                         fsl,ssi-dma-events = <46 45>;
 256                                         status = "disabled";
 257                                 };
 258
 259                                 asrc: asrc@02034000 {
 260                                         reg = <0x02034000 0x4000>;
 261                                         interrupts = <0 50 0x04>;
 262                                 };
 263
 264                                 spba@0203c000 {
 265                                         reg = <0x0203c000 0x4000>;
 266                                 };
 267                         };
 268
 269                         vpu: vpu@02040000 {
 270                                 reg = <0x02040000 0x3c000>;
 271                                 interrupts = <0 3 0x04 0 12 0x04>;
 272                         };
 273
 274                         aipstz@0207c000 { /* AIPSTZ1 */
 275                                 reg = <0x0207c000 0x4000>;
 276                         };
 277
 278                         pwm1: pwm@02080000 {
 279                                 #pwm-cells = <2>;
 280                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 281                                 reg = <0x02080000 0x4000>;
 282                                 interrupts = <0 83 0x04>;
 283                                 clocks = <&clks 62>, <&clks 145>;
 284                                 clock-names = "ipg", "per";
 285                         };
 286
 287                         pwm2: pwm@02084000 {
 288                                 #pwm-cells = <2>;
 289                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 290                                 reg = <0x02084000 0x4000>;
 291                                 interrupts = <0 84 0x04>;
 292                                 clocks = <&clks 62>, <&clks 146>;
 293                                 clock-names = "ipg", "per";
 294                         };
 295
 296                         pwm3: pwm@02088000 {
 297                                 #pwm-cells = <2>;
 298                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 299                                 reg = <0x02088000 0x4000>;
 300                                 interrupts = <0 85 0x04>;
 301                                 clocks = <&clks 62>, <&clks 147>;
 302                                 clock-names = "ipg", "per";
 303                         };
 304
 305                         pwm4: pwm@0208c000 {
 306                                 #pwm-cells = <2>;
 307                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 308                                 reg = <0x0208c000 0x4000>;
 309                                 interrupts = <0 86 0x04>;
 310                                 clocks = <&clks 62>, <&clks 148>;
 311                                 clock-names = "ipg", "per";
 312                         };
 313
 314                         can1: flexcan@02090000 {
 315                                 reg = <0x02090000 0x4000>;
 316                                 interrupts = <0 110 0x04>;
 317                         };
 318
 319                         can2: flexcan@02094000 {
 320                                 reg = <0x02094000 0x4000>;
 321                                 interrupts = <0 111 0x04>;
 322                         };
 323
 324                         gpt: gpt@02098000 {
 325                                 compatible = "fsl,imx6q-gpt";
 326                                 reg = <0x02098000 0x4000>;
 327                                 interrupts = <0 55 0x04>;
 328                         };
 329
 330                         gpio1: gpio@0209c000 {
 331                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 332                                 reg = <0x0209c000 0x4000>;
 333                                 interrupts = <0 66 0x04 0 67 0x04>;
 334                                 gpio-controller;
 335                                 #gpio-cells = <2>;
 336                                 interrupt-controller;
 337                                 #interrupt-cells = <2>;
 338                         };
 339
 340                         gpio2: gpio@020a0000 {
 341                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 342                                 reg = <0x020a0000 0x4000>;
 343                                 interrupts = <0 68 0x04 0 69 0x04>;
 344                                 gpio-controller;
 345                                 #gpio-cells = <2>;
 346                                 interrupt-controller;
 347                                 #interrupt-cells = <2>;
 348                         };
 349
 350                         gpio3: gpio@020a4000 {
 351                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 352                                 reg = <0x020a4000 0x4000>;
 353                                 interrupts = <0 70 0x04 0 71 0x04>;
 354                                 gpio-controller;
 355                                 #gpio-cells = <2>;
 356                                 interrupt-controller;
 357                                 #interrupt-cells = <2>;
 358                         };
 359
 360                         gpio4: gpio@020a8000 {
 361                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 362                                 reg = <0x020a8000 0x4000>;
 363                                 interrupts = <0 72 0x04 0 73 0x04>;
 364                                 gpio-controller;
 365                                 #gpio-cells = <2>;
 366                                 interrupt-controller;
 367                                 #interrupt-cells = <2>;
 368                         };
 369
 370                         gpio5: gpio@020ac000 {
 371                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 372                                 reg = <0x020ac000 0x4000>;
 373                                 interrupts = <0 74 0x04 0 75 0x04>;
 374                                 gpio-controller;
 375                                 #gpio-cells = <2>;
 376                                 interrupt-controller;
 377                                 #interrupt-cells = <2>;
 378                         };
 379
 380                         gpio6: gpio@020b0000 {
 381                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 382                                 reg = <0x020b0000 0x4000>;
 383                                 interrupts = <0 76 0x04 0 77 0x04>;
 384                                 gpio-controller;
 385                                 #gpio-cells = <2>;
 386                                 interrupt-controller;
 387                                 #interrupt-cells = <2>;
 388                         };
 389
 390                         gpio7: gpio@020b4000 {
 391                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 392                                 reg = <0x020b4000 0x4000>;
 393                                 interrupts = <0 78 0x04 0 79 0x04>;
 394                                 gpio-controller;
 395                                 #gpio-cells = <2>;
 396                                 interrupt-controller;
 397                                 #interrupt-cells = <2>;
 398                         };
 399
 400                         kpp: kpp@020b8000 {
 401                                 reg = <0x020b8000 0x4000>;
 402                                 interrupts = <0 82 0x04>;
 403                         };
 404
 405                         wdog1: wdog@020bc000 {
 406                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 407                                 reg = <0x020bc000 0x4000>;
 408                                 interrupts = <0 80 0x04>;
 409                                 clocks = <&clks 0>;
 410                         };
 411
 412                         wdog2: wdog@020c0000 {
 413                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 414                                 reg = <0x020c0000 0x4000>;
 415                                 interrupts = <0 81 0x04>;
 416                                 clocks = <&clks 0>;
 417                                 status = "disabled";
 418                         };
 419
 420                         clks: ccm@020c4000 {
 421                                 compatible = "fsl,imx6q-ccm";
 422                                 reg = <0x020c4000 0x4000>;
 423                                 interrupts = <0 87 0x04 0 88 0x04>;
 424                                 #clock-cells = <1>;
 425                         };
 426
 427                         anatop: anatop@020c8000 {
 428                                 compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
 429                                 reg = <0x020c8000 0x1000>;
 430                                 interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
 431
 432                                 regulator-1p1@110 {
 433                                         compatible = "fsl,anatop-regulator";
 434                                         regulator-name = "vdd1p1";
 435                                         regulator-min-microvolt = <800000>;
 436                                         regulator-max-microvolt = <1375000>;
 437                                         regulator-always-on;
 438                                         anatop-reg-offset = <0x110>;
 439                                         anatop-vol-bit-shift = <8>;
 440                                         anatop-vol-bit-width = <5>;
 441                                         anatop-min-bit-val = <4>;
 442                                         anatop-min-voltage = <800000>;
 443                                         anatop-max-voltage = <1375000>;
 444                                 };
 445
 446                                 regulator-3p0@120 {
 447                                         compatible = "fsl,anatop-regulator";
 448                                         regulator-name = "vdd3p0";
 449                                         regulator-min-microvolt = <2800000>;
 450                                         regulator-max-microvolt = <3150000>;
 451                                         regulator-always-on;
 452                                         anatop-reg-offset = <0x120>;
 453                                         anatop-vol-bit-shift = <8>;
 454                                         anatop-vol-bit-width = <5>;
 455                                         anatop-min-bit-val = <0>;
 456                                         anatop-min-voltage = <2625000>;
 457                                         anatop-max-voltage = <3400000>;
 458                                 };
 459
 460                                 regulator-2p5@130 {
 461                                         compatible = "fsl,anatop-regulator";
 462                                         regulator-name = "vdd2p5";
 463                                         regulator-min-microvolt = <2000000>;
 464                                         regulator-max-microvolt = <2750000>;
 465                                         regulator-always-on;
 466                                         anatop-reg-offset = <0x130>;
 467                                         anatop-vol-bit-shift = <8>;
 468                                         anatop-vol-bit-width = <5>;
 469                                         anatop-min-bit-val = <0>;
 470                                         anatop-min-voltage = <2000000>;
 471                                         anatop-max-voltage = <2750000>;
 472                                 };
 473
 474                                 reg_cpu: regulator-vddcore@140 {
 475                                         compatible = "fsl,anatop-regulator";
 476                                         regulator-name = "cpu";
 477                                         regulator-min-microvolt = <725000>;
 478                                         regulator-max-microvolt = <1450000>;
 479                                         regulator-always-on;
 480                                         anatop-reg-offset = <0x140>;
 481                                         anatop-vol-bit-shift = <0>;
 482                                         anatop-vol-bit-width = <5>;
 483                                         anatop-min-bit-val = <1>;
 484                                         anatop-min-voltage = <725000>;
 485                                         anatop-max-voltage = <1450000>;
 486                                 };
 487
 488                                 regulator-vddpu@140 {
 489                                         compatible = "fsl,anatop-regulator";
 490                                         regulator-name = "vddpu";
 491                                         regulator-min-microvolt = <725000>;
 492                                         regulator-max-microvolt = <1450000>;
 493                                         regulator-always-on;
 494                                         anatop-reg-offset = <0x140>;
 495                                         anatop-vol-bit-shift = <9>;
 496                                         anatop-vol-bit-width = <5>;
 497                                         anatop-min-bit-val = <1>;
 498                                         anatop-min-voltage = <725000>;
 499                                         anatop-max-voltage = <1450000>;
 500                                 };
 501
 502                                 regulator-vddsoc@140 {
 503                                         compatible = "fsl,anatop-regulator";
 504                                         regulator-name = "vddsoc";
 505                                         regulator-min-microvolt = <725000>;
 506                                         regulator-max-microvolt = <1450000>;
 507                                         regulator-always-on;
 508                                         anatop-reg-offset = <0x140>;
 509                                         anatop-vol-bit-shift = <18>;
 510                                         anatop-vol-bit-width = <5>;
 511                                         anatop-min-bit-val = <1>;
 512                                         anatop-min-voltage = <725000>;
 513                                         anatop-max-voltage = <1450000>;
 514                                 };
 515                         };
 516
 517                         usbphy1: usbphy@020c9000 {
 518                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 519                                 reg = <0x020c9000 0x1000>;
 520                                 interrupts = <0 44 0x04>;
 521                                 clocks = <&clks 182>;
 522                         };
 523
 524                         usbphy2: usbphy@020ca000 {
 525                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 526                                 reg = <0x020ca000 0x1000>;
 527                                 interrupts = <0 45 0x04>;
 528                                 clocks = <&clks 183>;
 529                         };
 530
 531                         snvs@020cc000 {
 532                                 compatible = "fsl,sec-v4.0-mon", "simple-bus";
 533                                 #address-cells = <1>;
 534                                 #size-cells = <1>;
 535                                 ranges = <0 0x020cc000 0x4000>;
 536
 537                                 snvs-rtc-lp@34 {
 538                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 539                                         reg = <0x34 0x58>;
 540                                         interrupts = <0 19 0x04 0 20 0x04>;
 541                                 };
 542                         };
 543
 544                         epit1: epit@020d0000 { /* EPIT1 */
 545                                 reg = <0x020d0000 0x4000>;
 546                                 interrupts = <0 56 0x04>;
 547                         };
 548
 549                         epit2: epit@020d4000 { /* EPIT2 */
 550                                 reg = <0x020d4000 0x4000>;
 551                                 interrupts = <0 57 0x04>;
 552                         };
 553
 554                         src: src@020d8000 {
 555                                 compatible = "fsl,imx6q-src";
 556                                 reg = <0x020d8000 0x4000>;
 557                                 interrupts = <0 91 0x04 0 96 0x04>;
 558                         };
 559
 560                         gpc: gpc@020dc000 {
 561                                 compatible = "fsl,imx6q-gpc";
 562                                 reg = <0x020dc000 0x4000>;
 563                                 interrupts = <0 89 0x04 0 90 0x04>;
 564                         };
 565
 566                         gpr: iomuxc-gpr@020e0000 {
 567                                 compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
 568                                 reg = <0x020e0000 0x38>;
 569                         };
 570
 571                         iomuxc: iomuxc@020e0000 {
 572                                 compatible = "fsl,imx6q-iomuxc";
 573                                 reg = <0x020e0000 0x4000>;
 574
 575                                 /* shared pinctrl settings */
 576                                 audmux {
 577                                         pinctrl_audmux_1: audmux-1 {
 578                                                 fsl,pins = <
 579                                                         18   0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
 580                                                         1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
 581                                                         11   0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
 582                                                         3    0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
 583                                                 >;
 584                                         };
 585                                 };
 586
 587                                 ecspi1 {
 588                                         pinctrl_ecspi1_1: ecspi1grp-1 {
 589                                                 fsl,pins = <
 590                                                         101 0x100b1     /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
 591                                                         109 0x100b1     /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
 592                                                         94  0x100b1     /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
 593                                                 >;
 594                                         };
 595                                 };
 596
 597                                 enet {
 598                                         pinctrl_enet_1: enetgrp-1 {
 599                                                 fsl,pins = <
 600                                                         695 0x1b0b0     /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */
 601                                                         756 0x1b0b0     /* MX6Q_PAD_ENET_MDC__ENET_MDC */
 602                                                         24  0x1b0b0     /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
 603                                                         30  0x1b0b0     /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
 604                                                         34  0x1b0b0     /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
 605                                                         39  0x1b0b0     /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
 606                                                         44  0x1b0b0     /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
 607                                                         56  0x1b0b0     /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
 608                                                         702 0x1b0b0     /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
 609                                                         74  0x1b0b0     /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
 610                                                         52  0x1b0b0     /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
 611                                                         61  0x1b0b0     /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
 612                                                         66  0x1b0b0     /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
 613                                                         70  0x1b0b0     /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
 614                                                         48  0x1b0b0     /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
 615                                                         1033 0x4001b0a8 /* MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT*/
 616                                                 >;
 617                                         };
 618
 619                                         pinctrl_enet_2: enetgrp-2 {
 620                                                 fsl,pins = <
 621                                                         890 0x1b0b0     /* MX6Q_PAD_KEY_COL1__ENET_MDIO */
 622                                                         909 0x1b0b0     /* MX6Q_PAD_KEY_COL2__ENET_MDC */
 623                                                         24  0x1b0b0     /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
 624                                                         30  0x1b0b0     /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
 625                                                         34  0x1b0b0     /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
 626                                                         39  0x1b0b0     /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
 627                                                         44  0x1b0b0     /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
 628                                                         56  0x1b0b0     /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
 629                                                         702 0x1b0b0     /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
 630                                                         74  0x1b0b0     /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
 631                                                         52  0x1b0b0     /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
 632                                                         61  0x1b0b0     /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
 633                                                         66  0x1b0b0     /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
 634                                                         70  0x1b0b0     /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
 635                                                         48  0x1b0b0     /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
 636                                                 >;
 637                                         };
 638                                 };
 639
 640                                 gpmi-nand {
 641                                         pinctrl_gpmi_nand_1: gpmi-nand-1 {
 642                                                 fsl,pins = <
 643                                                         1328 0xb0b1     /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
 644                                                         1336 0xb0b1     /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
 645                                                         1344 0xb0b1     /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
 646                                                         1352 0xb000     /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
 647                                                         1360 0xb0b1     /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
 648                                                         1365 0xb0b1     /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
 649                                                         1371 0xb0b1     /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
 650                                                         1378 0xb0b1     /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
 651                                                         1387 0xb0b1     /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
 652                                                         1393 0xb0b1     /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
 653                                                         1397 0xb0b1     /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
 654                                                         1405 0xb0b1     /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
 655                                                         1413 0xb0b1     /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
 656                                                         1421 0xb0b1     /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
 657                                                         1429 0xb0b1     /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
 658                                                         1437 0xb0b1     /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
 659                                                         1445 0xb0b1     /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
 660                                                         1453 0xb0b1     /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
 661                                                         1463 0x00b1     /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
 662                                                 >;
 663                                         };
 664                                 };
 665
 666                                 i2c1 {
 667                                         pinctrl_i2c1_1: i2c1grp-1 {
 668                                                 fsl,pins = <
 669                                                         137 0x4001b8b1  /* MX6Q_PAD_EIM_D21__I2C1_SCL */
 670                                                         196 0x4001b8b1  /* MX6Q_PAD_EIM_D28__I2C1_SDA */
 671                                                 >;
 672                                         };
 673                                 };
 674
 675                                 uart1 {
 676                                         pinctrl_uart1_1: uart1grp-1 {
 677                                                 fsl,pins = <
 678                                                         1140 0x1b0b1    /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */
 679                                                         1148 0x1b0b1    /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */
 680                                                 >;
 681                                         };
 682                                 };
 683
 684                                 uart2 {
 685                                         pinctrl_uart2_1: uart2grp-1 {
 686                                                 fsl,pins = <
 687                                                         183 0x1b0b1     /* MX6Q_PAD_EIM_D26__UART2_TXD */
 688                                                         191 0x1b0b1     /* MX6Q_PAD_EIM_D27__UART2_RXD */
 689                                                 >;
 690                                         };
 691                                 };
 692
 693                                 uart4 {
 694                                         pinctrl_uart4_1: uart4grp-1 {
 695                                                 fsl,pins = <
 696                                                         877 0x1b0b1     /* MX6Q_PAD_KEY_COL0__UART4_TXD */
 697                                                         885 0x1b0b1     /* MX6Q_PAD_KEY_ROW0__UART4_RXD */
 698                                                 >;
 699                                         };
 700                                 };
 701
 702                                 usbotg {
 703                                         pinctrl_usbotg_1: usbotggrp-1 {
 704                                                 fsl,pins = <
 705                                                         1592 0x17059    /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
 706                                                 >;
 707                                         };
 708                                 };
 709
 710                                 usdhc2 {
 711                                         pinctrl_usdhc2_1: usdhc2grp-1 {
 712                                                 fsl,pins = <
 713                                                         1577 0x17059    /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */
 714                                                         1569 0x10059    /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */
 715                                                         16   0x17059    /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */
 716                                                         0    0x17059    /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */
 717                                                         8    0x17059    /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */
 718                                                         1583 0x17059    /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */
 719                                                         1430 0x17059    /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */
 720                                                         1438 0x17059    /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */
 721                                                         1446 0x17059    /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */
 722                                                         1454 0x17059    /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */
 723                                                 >;
 724                                         };
 725                                 };
 726
 727                                 usdhc3 {
 728                                         pinctrl_usdhc3_1: usdhc3grp-1 {
 729                                                 fsl,pins = <
 730                                                         1273 0x17059    /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
 731                                                         1281 0x10059    /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
 732                                                         1289 0x17059    /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
 733                                                         1297 0x17059    /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
 734                                                         1305 0x17059    /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
 735                                                         1312 0x17059    /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
 736                                                         1265 0x17059    /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
 737                                                         1257 0x17059    /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
 738                                                         1249 0x17059    /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
 739                                                         1241 0x17059    /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
 740                                                 >;
 741                                         };
 742
 743                                         pinctrl_usdhc3_2: usdhc3grp-2 {
 744                                                 fsl,pins = <
 745                                                         1273 0x17059    /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
 746                                                         1281 0x10059    /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
 747                                                         1289 0x17059    /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
 748                                                         1297 0x17059    /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
 749                                                         1305 0x17059    /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
 750                                                         1312 0x17059    /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
 751                                                 >;
 752                                         };
 753                                 };
 754
 755                                 usdhc4 {
 756                                         pinctrl_usdhc4_1: usdhc4grp-1 {
 757                                                 fsl,pins = <
 758                                                         1386 0x17059    /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
 759                                                         1392 0x10059    /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
 760                                                         1462 0x17059    /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
 761                                                         1470 0x17059    /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
 762                                                         1478 0x17059    /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
 763                                                         1486 0x17059    /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
 764                                                         1493 0x17059    /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
 765                                                         1501 0x17059    /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
 766                                                         1509 0x17059    /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
 767                                                         1517 0x17059    /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
 768                                                 >;
 769                                         };
 770
 771                                         pinctrl_usdhc4_2: usdhc4grp-2 {
 772                                                 fsl,pins = <
 773                                                         1386 0x17059    /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
 774                                                         1392 0x10059    /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
 775                                                         1462 0x17059    /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
 776                                                         1470 0x17059    /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
 777                                                         1478 0x17059    /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
 778                                                         1486 0x17059    /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
 779                                                 >;
 780                                         };
 781                                 };
 782                         };
 783
 784                         dcic1: dcic@020e4000 {
 785                                 reg = <0x020e4000 0x4000>;
 786                                 interrupts = <0 124 0x04>;
 787                         };
 788
 789                         dcic2: dcic@020e8000 {
 790                                 reg = <0x020e8000 0x4000>;
 791                                 interrupts = <0 125 0x04>;
 792                         };
 793
 794                         sdma: sdma@020ec000 {
 795                                 compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 796                                 reg = <0x020ec000 0x4000>;
 797                                 interrupts = <0 2 0x04>;
 798                                 clocks = <&clks 155>, <&clks 155>;
 799                                 clock-names = "ipg", "ahb";
 800                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
 801                         };
 802                 };
 803
 804                 aips-bus@02100000 { /* AIPS2 */
 805                         compatible = "fsl,aips-bus", "simple-bus";
 806                         #address-cells = <1>;
 807                         #size-cells = <1>;
 808                         reg = <0x02100000 0x100000>;
 809                         ranges;
 810
 811                         caam@02100000 {
 812                                 reg = <0x02100000 0x40000>;
 813                                 interrupts = <0 105 0x04 0 106 0x04>;
 814                         };
 815
 816                         aipstz@0217c000 { /* AIPSTZ2 */
 817                                 reg = <0x0217c000 0x4000>;
 818                         };
 819
 820                         usbotg: usb@02184000 {
 821                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 822                                 reg = <0x02184000 0x200>;
 823                                 interrupts = <0 43 0x04>;
 824                                 clocks = <&clks 162>;
 825                                 fsl,usbphy = <&usbphy1>;
 826                                 fsl,usbmisc = <&usbmisc 0>;
 827                                 status = "disabled";
 828                         };
 829
 830                         usbh1: usb@02184200 {
 831                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 832                                 reg = <0x02184200 0x200>;
 833                                 interrupts = <0 40 0x04>;
 834                                 clocks = <&clks 162>;
 835                                 fsl,usbphy = <&usbphy2>;
 836                                 fsl,usbmisc = <&usbmisc 1>;
 837                                 status = "disabled";
 838                         };
 839
 840                         usbh2: usb@02184400 {
 841                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 842                                 reg = <0x02184400 0x200>;
 843                                 interrupts = <0 41 0x04>;
 844                                 clocks = <&clks 162>;
 845                                 fsl,usbmisc = <&usbmisc 2>;
 846                                 status = "disabled";
 847                         };
 848
 849                         usbh3: usb@02184600 {
 850                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 851                                 reg = <0x02184600 0x200>;
 852                                 interrupts = <0 42 0x04>;
 853                                 clocks = <&clks 162>;
 854                                 fsl,usbmisc = <&usbmisc 3>;
 855                                 status = "disabled";
 856                         };
 857
 858                         usbmisc: usbmisc: usbmisc@02184800 {
 859                                 #index-cells = <1>;
 860                                 compatible = "fsl,imx6q-usbmisc";
 861                                 reg = <0x02184800 0x200>;
 862                                 clocks = <&clks 162>;
 863                         };
 864
 865                         fec: ethernet@02188000 {
 866                                 compatible = "fsl,imx6q-fec";
 867                                 reg = <0x02188000 0x4000>;
 868                                 interrupts = <0 118 0x04 0 119 0x04>;
 869                                 clocks = <&clks 117>, <&clks 117>, <&clks 177>;
 870                                 clock-names = "ipg", "ahb", "ptp";
 871                                 status = "disabled";
 872                         };
 873
 874                         mlb@0218c000 {
 875                                 reg = <0x0218c000 0x4000>;
 876                                 interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
 877                         };
 878
 879                         usdhc1: usdhc@02190000 {
 880                                 compatible = "fsl,imx6q-usdhc";
 881                                 reg = <0x02190000 0x4000>;
 882                                 interrupts = <0 22 0x04>;
 883                                 clocks = <&clks 163>, <&clks 163>, <&clks 163>;
 884                                 clock-names = "ipg", "ahb", "per";
 885                                 bus-width = <4>;
 886                                 status = "disabled";
 887                         };
 888
 889                         usdhc2: usdhc@02194000 {
 890                                 compatible = "fsl,imx6q-usdhc";
 891                                 reg = <0x02194000 0x4000>;
 892                                 interrupts = <0 23 0x04>;
 893                                 clocks = <&clks 164>, <&clks 164>, <&clks 164>;
 894                                 clock-names = "ipg", "ahb", "per";
 895                                 bus-width = <4>;
 896                                 status = "disabled";
 897                         };
 898
 899                         usdhc3: usdhc@02198000 {
 900                                 compatible = "fsl,imx6q-usdhc";
 901                                 reg = <0x02198000 0x4000>;
 902                                 interrupts = <0 24 0x04>;
 903                                 clocks = <&clks 165>, <&clks 165>, <&clks 165>;
 904                                 clock-names = "ipg", "ahb", "per";
 905                                 bus-width = <4>;
 906                                 status = "disabled";
 907                         };
 908
 909                         usdhc4: usdhc@0219c000 {
 910                                 compatible = "fsl,imx6q-usdhc";
 911                                 reg = <0x0219c000 0x4000>;
 912                                 interrupts = <0 25 0x04>;
 913                                 clocks = <&clks 166>, <&clks 166>, <&clks 166>;
 914                                 clock-names = "ipg", "ahb", "per";
 915                                 bus-width = <4>;
 916                                 status = "disabled";
 917                         };
 918
 919                         i2c1: i2c@021a0000 {
 920                                 #address-cells = <1>;
 921                                 #size-cells = <0>;
 922                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 923                                 reg = <0x021a0000 0x4000>;
 924                                 interrupts = <0 36 0x04>;
 925                                 clocks = <&clks 125>;
 926                                 status = "disabled";
 927                         };
 928
 929                         i2c2: i2c@021a4000 {
 930                                 #address-cells = <1>;
 931                                 #size-cells = <0>;
 932                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 933                                 reg = <0x021a4000 0x4000>;
 934                                 interrupts = <0 37 0x04>;
 935                                 clocks = <&clks 126>;
 936                                 status = "disabled";
 937                         };
 938
 939                         i2c3: i2c@021a8000 {
 940                                 #address-cells = <1>;
 941                                 #size-cells = <0>;
 942                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 943                                 reg = <0x021a8000 0x4000>;
 944                                 interrupts = <0 38 0x04>;
 945                                 clocks = <&clks 127>;
 946                                 status = "disabled";
 947                         };
 948
 949                         romcp@021ac000 {
 950                                 reg = <0x021ac000 0x4000>;
 951                         };
 952
 953                         mmdc0: mmdc@021b0000 { /* MMDC0 */
 954                                 compatible = "fsl,imx6q-mmdc";
 955                                 reg = <0x021b0000 0x4000>;
 956                         };
 957
 958                         mmdc1: mmdc@021b4000 { /* MMDC1 */
 959                                 reg = <0x021b4000 0x4000>;
 960                         };
 961
 962                         weim@021b8000 {
 963                                 reg = <0x021b8000 0x4000>;
 964                                 interrupts = <0 14 0x04>;
 965                         };
 966
 967                         ocotp@021bc000 {
 968                                 reg = <0x021bc000 0x4000>;
 969                         };
 970
 971                         ocotp@021c0000 {
 972                                 reg = <0x021c0000 0x4000>;
 973                                 interrupts = <0 21 0x04>;
 974                         };
 975
 976                         tzasc@021d0000 { /* TZASC1 */
 977                                 reg = <0x021d0000 0x4000>;
 978                                 interrupts = <0 108 0x04>;
 979                         };
 980
 981                         tzasc@021d4000 { /* TZASC2 */
 982                                 reg = <0x021d4000 0x4000>;
 983                                 interrupts = <0 109 0x04>;
 984                         };
 985
 986                         audmux: audmux@021d8000 {
 987                                 compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 988                                 reg = <0x021d8000 0x4000>;
 989                                 status = "disabled";
 990                         };
 991
 992                         mipi@021dc000 { /* MIPI-CSI */
 993                                 reg = <0x021dc000 0x4000>;
 994                         };
 995
 996                         mipi@021e0000 { /* MIPI-DSI */
 997                                 reg = <0x021e0000 0x4000>;
 998                         };
 999
1000                         vdoa@021e4000 {
1001                                 reg = <0x021e4000 0x4000>;
1002                                 interrupts = <0 18 0x04>;
1003                         };
1004
1005                         uart2: serial@021e8000 {
1006                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1007                                 reg = <0x021e8000 0x4000>;
1008                                 interrupts = <0 27 0x04>;
1009                                 clocks = <&clks 160>, <&clks 161>;
1010                                 clock-names = "ipg", "per";
1011                                 status = "disabled";
1012                         };
1013
1014                         uart3: serial@021ec000 {
1015                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1016                                 reg = <0x021ec000 0x4000>;
1017                                 interrupts = <0 28 0x04>;
1018                                 clocks = <&clks 160>, <&clks 161>;
1019                                 clock-names = "ipg", "per";
1020                                 status = "disabled";
1021                         };
1022
1023                         uart4: serial@021f0000 {
1024                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1025                                 reg = <0x021f0000 0x4000>;
1026                                 interrupts = <0 29 0x04>;
1027                                 clocks = <&clks 160>, <&clks 161>;
1028                                 clock-names = "ipg", "per";
1029                                 status = "disabled";
1030                         };
1031
1032                         uart5: serial@021f4000 {
1033                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1034                                 reg = <0x021f4000 0x4000>;
1035                                 interrupts = <0 30 0x04>;
1036                                 clocks = <&clks 160>, <&clks 161>;
1037                                 clock-names = "ipg", "per";
1038                                 status = "disabled";
1039                         };
1040                 };
1041
1042                 ipu1: ipu@02400000 {
1043                         #crtc-cells = <1>;
1044                         compatible = "fsl,imx6q-ipu";
1045                         reg = <0x02400000 0x400000>;
1046                         interrupts = <0 6 0x4 0 5 0x4>;
1047                         clocks = <&clks 130>, <&clks 131>, <&clks 132>;
1048                         clock-names = "bus", "di0", "di1";
1049                 };
1050
1051                 ipu2: ipu@02800000 {
1052                         #crtc-cells = <1>;
1053                         compatible = "fsl,imx6q-ipu";
1054                         reg = <0x02800000 0x400000>;
1055                         interrupts = <0 8 0x4 0 7 0x4>;
1056                         clocks = <&clks 133>, <&clks 134>, <&clks 137>;
1057                         clock-names = "bus", "di0", "di1";
1058                 };
1059         };
1060 };