Pileus Git - ~andy/linux/blob - arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts

   1 /*
   2  * Copyright 2012 Markus Pargmann, Pengutronix
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "imx27-phytec-phycard-s-som.dts"
  13
  14 / {
  15         model = "Phytec pca100 rapid development kit";
  16         compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
  17
  18         display: display {
  19                 model = "Primeview-PD050VL1";
  20                 native-mode = <&timing0>;
  21                 bits-per-pixel = <16>;  /* non-standard but required */
  22                 fsl,pcr = <0xf0c88080>; /* non-standard but required */
  23                 display-timings {
  24                         timing0: 640x480 {
  25                                 hactive = <640>;
  26                                 vactive = <480>;
  27                                 hback-porch = <112>;
  28                                 hfront-porch = <36>;
  29                                 hsync-len = <32>;
  30                                 vback-porch = <33>;
  31                                 vfront-porch = <33>;
  32                                 vsync-len = <2>;
  33                                 clock-frequency = <25000000>;
  34                         };
  35                 };
  36         };
  37 };
  38
  39 &fb {
  40         display = <&display>;
  41         status = "okay";
  42 };
  43
  44 &i2c1 {
  45         status = "okay";
  46
  47         rtc@51 {
  48                 compatible = "nxp,pcf8563";
  49                 reg = <0x51>;
  50         };
  51 };
  52
  53 &owire {
  54         status = "okay";
  55 };
  56
  57 &sdhci2 {
  58         cd-gpios = <&gpio3 29 0>;
  59         status = "okay";
  60 };
  61
  62 &uart1 {
  63         fsl,uart-has-rtscts;
  64         status = "okay";
  65 };
  66
  67 &uart2 {
  68         fsl,uart-has-rtscts;
  69         status = "okay";
  70 };
  71
  72 &uart3 {
  73         fsl,uart-has-rtscts;
  74         status = "okay";
  75 };